ZTE-AN-ETH-EFM-MIB Table View

This table contains the primary controls and status for the OAM 
capabilities of an Ethernet like interface. There will be one row 
in this table for each Ethernet like interface in the system that 
supports the OAM functions defined in [802.3ah].

zxAnEthOamEntry row .1.3.6.1.4.1.3902.1015.61.1.1

An entry in the table, containing information on the Ethernet OAM
function for a single Ethernet like interface. Entries in the table
are created automatically for each interface supporting Ethernet OAM.
The status o…

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
zxAnEthOamAdminState This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. The OamAdminState always starts in the disabled(1) state un…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1015.61.1.1.1
zxAnEthOamOperStatus At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may be used on that link. The progress of this initialization…	Enumeration Enumerated Values: 1 disabled 2 linkFault 3 passiveWait 4 activeSendLocal 5 sendLocalAndRemote 6 sendLocalAndRemoteOk 7 oamPeeringLocallyRejected 8 oamPeeringRemotelyRejected 9 operational 10 nonOperHalfDuplex	.1.3.6.1.4.1.3902.1015.61.1.1.2
zxAnEthOamMode This object configures the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These two modes differ in that active mode provides additional c…	Enumerationr/w Enumerated Values: 1 passive 2 active	.1.3.6.1.4.1.3902.1015.61.1.1.3
zxAnEthOamMaxOamPduSize The largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes between the peers. This value is determined by the local imp…	octetsUnsigned32 Constraints: range: 64-1518	.1.3.6.1.4.1.3902.1015.61.1.1.4
zxAnEthOamConfigRevision The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate configuration changes have occurred which might require th…	octetsUnsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1015.61.1.1.5
zxAnEthOamFunctionsSupported The OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always required. These functional groups can be supported independently…	Bits Enumerated Values: 0 unidirectionalSupport 1 loopbackSupport 2 eventSupport 3 variableSupport	.1.3.6.1.4.1.3902.1015.61.1.1.6
zxAnEthOamHardwareInfo A textual description of hardware info.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.61.1.1.7
zxAnEthOamSoftwareInfo A textual description of software info.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.61.1.1.8

This table contains information about the OAM peer for a particular Ethernet 
like interface. OAM entities communicate with a single OAM peer entity on 
Ethernet links on which OAM is enabled and operating properly. There is one 
entry in this table for each entry in the OamTable for which information 
on the peer OAM entity is available.

zxAnEthOamPeerEntry row .1.3.6.1.4.1.3902.1015.61.2.1

An entry in the table, containing information on the peer OAM entity for
a single Ethernet like interface. Note that there is at most one OAM peer
for each Ethernet like interface. Entries are automatically created wh…

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
zxAnEthOamPeerMacAddress The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1015.61.2.1.1
zxAnEthOamPeerVendorOui The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the remote OAM entity. This value is initialized to three oct…	Dot3Oui Type Constraints: range: 3	.1.3.6.1.4.1.3902.1015.61.2.1.2
zxAnEthOamPeerVendorInfo The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the Local Information TLV, and can be used to determine addit…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.2.1.3
zxAnEthOamPeerMode The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the Configuration field in the Local Information TLV of the las…	Enumeration Enumerated Values: 1 passive 2 active 3 unknown	.1.3.6.1.4.1.3902.1015.61.2.1.4
zxAnEthOamPeerMaxOamPduSize The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The maxi…	octetsUnsigned32 Constraints: range: 0-0 range: 64-1518	.1.3.6.1.4.1.3902.1015.61.2.1.5
zxAnEthOamPeerConfigRevision The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration change for Ethernet OAM this interface. The configuration revis…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1015.61.2.1.6
zxAnEthOamPeerFunctionsSupported The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to …	Bits Enumerated Values: 0 unidirectionalSupport 1 loopbackSupport 2 eventSupport 3 variableSupport	.1.3.6.1.4.1.3902.1015.61.2.1.7

This table contains controls for the loopback state of the local link as well 
as indicating the status of the loopback function. There is one entry in this 
table for each entry in OamTable that supports loopback functionality 
(where OamFunctionsSupported includes the loopbackSupport bit set). 
Loopback can be used to place the remote OAM entity in a state where every 
received frame (except OAMPDUs) are echoed back over the same interface 
on which they were received. In this state, at the remote entity, 'normal' 
traffic is disabled as only the looped back frames are transmitted on 
the interface. Loopback is thus an intrusive operation that prohibits normal 
data flow and should be used accordingly.

zxAnEthOamLoopbackEntry row .1.3.6.1.4.1.3902.1015.61.3.1

An entry in the table, containing information on the peer OAM entity for
a single Ethernet like interface. Note that there is at most one OAM peer
for each Ethernet like interface. Entries are automatically created wh…

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
zxAnEthOamLoopbackStatus The loopback status of the OAM entity. This status is determined by a combination of the local parser and multiplexer states, the remote parser and multiplexer states, as well as by the actions of the local OAM clien…	Enumerationr/w Enumerated Values: 1 noLoopback 2 initiatingLoopback 3 remoteLoopback 4 terminatingLoopback 5 localLoopback 6 unknown	.1.3.6.1.4.1.3902.1015.61.3.1.1
zxAnEthOamLoopbackIgnoreRx Since OAM loopback is a distruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM loopback commands are processed or ignored. When the value …	Enumerationr/w Enumerated Values: 1 ignore 2 process	.1.3.6.1.4.1.3902.1015.61.3.1.2
zxAnEthOamLoopbackResult This is loop test result and includes reasons for test failures.	Enumeration Enumerated Values: 0 noResult 1 success 2 generalFailed 3 noSupport 4 unkown 5 noSuchPort 6 loopBackFailed 7 portNotActive 8 portInTesting 9 portInService 10 portFailures 11 cardFailures 12 noPvcFound 13 unknownTestType	.1.3.6.1.4.1.3902.1015.61.3.1.3
zxAnEthOamLoopbackSend The count of packet will be sent in the loopback test.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.61.3.1.4
zxAnEthOamLoopbackRecv The count of recived packet in the loopback test.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.61.3.1.5

This table contains statistics for the OAM function on a particular Ethernet 
like interface. There is an entry in the table for every entry in the OamTable. 
The counters in this table are defined as 32-bit entries to match the counter size 
as defined in [802.3ah]. Given the OAM protocol is a slow protocol, the counters 
increment at a slow rate.

zxAnEthOamStatsEntry row .1.3.6.1.4.1.3902.1015.61.4.1

An entry in the table, containing statistics information on the Ethernet OAM
function for a single Ethernet like interface. Entries are automatically created
for every entry in the OamTable. Counters are maintained ac…

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
zxAnEthOamInformationTx A count of the number of Information OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the …	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.1
zxAnEthOamInformationRx A count of the number of Information OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the if…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.2
zxAnEthOamUniqueEventNotificationTx A count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of successfully being received, given the possiblity that a frame m…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.3
zxAnEthOamUniqueEventNotificationRx A count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possiblity that a fra…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.4
zxAnEthOamDuplicateEventNotificationTx A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possiblity that…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.5
zxAnEthOamDuplicateEventNotificationRx A count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.6
zxAnEthOamLoopbackControlTx A count of the number of Loopback Control OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.7
zxAnEthOamLoopbackControlRx A count of the number of Loopback Control OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of th…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.8
zxAnEthOamVariableRequestTx A count of the number of Variable Request OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.9
zxAnEthOamVariableRequestRx A count of the number of Variable Request OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of th…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.10
zxAnEthOamVariableResponseTx A count of the number of Variable Response OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value o…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.11
zxAnEthOamVariableResponseRx A count of the number of Variable Response OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of t…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.12
zxAnEthOamOrgSpecificTx A count of the number of Organization Specific OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the valu…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.13
zxAnEthOamOrgSpecificRx A count of the number of Organization Specific OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value …	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.14
zxAnEthOamUnsupportedCodesTx A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by t…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.15
zxAnEthOamUnsupportedCodesRx A count of the number of OAMPDUs received on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the v…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.16
zxAnEthOamFramesLostDueToOam A count of the number of frames that were dropped by the OAM multiplexer. Since the OAM mulitplexer has multiple inputs and a single output, there may be cases where frames are dropped due to transmit resource content…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.4.1.17

Ethernet OAM includes the ability to generate and receive Event Notification OAMPDUs 
to indicate various link problems. This table contains the mechanisms to enable 
Event Notifications and configure the thresholds to generate the standard Ethernet 
OAM events. There is one entry in the table for every entry in OamTable that 
supports OAM events (where OamFunctionsSupported includes the eventSupport bit set). 
The values in the table are maintained across changes to OamOperStatus. There 
are other events (dying gasp, critical events) that are not threshold crossing 
events but which can be enabled/disabled via this table.

zxAnEthOamEventConfigEntry row .1.3.6.1.4.1.3902.1015.61.5.1

Entries are automatically created and deleted from this table, and exist
whenever the OAM entity supports Ethernet OAM events (as indicated by the
eventSupport bit in OamFunctionsSuppported). Values in the table are
…

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
zxAnEthOamErrSymPeriodWindowHi The two objects OamErrSymPeriodWindowHi and OamErrSymPeriodLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is defined as OamErrSymPeriod…	2^32 symbolsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.5.1.1
zxAnEthOamErrSymPeriodWindowLo The two objects OamErrSymPeriodWindowHi and OamErrSymPeriodWindowLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is defined as OamErrSymP…	symbolsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.5.1.2
zxAnEthOamErrSymPeriodThresholdHi The two objects OamErrSymPeriodThresholdHi and OamErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause this event. Th…	2^32 symbolsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.5.1.3
zxAnEthOamErrSymPeriodThresholdLo The two objects OamErrSymPeriodThresholdHi and OamErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause this event. Th…	symbolsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.5.1.4
zxAnEthOamErrSymPeriodEvNotifEnable If true, the OAM entity should send an Event Notification OAMPDU when an Errored Symbol Period Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.61.5.1.5
zxAnEthOamErrFramePeriodWindow The number of frames over which the threshold is defined. The default value of the window is the number of minimum size Ethernet frames that can be received over the physical layer in one second. If OamErrFramePeriodT…	framesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.5.1.6
zxAnEthOamErrFramePeriodThreshold The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of ev…	framesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.5.1.7
zxAnEthOamErrFramePeriodEvNotifEnable If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Period Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.61.5.1.8
zxAnEthOamErrFrameWindow The amount of time (in 100ms increments) over which the threshold is defined. The default value is 10 (1 second). If OamErrFrameThreshold frame errors occur within a window of OamErrFrameWindow seconds (measured in te…	tenths of a secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.5.1.9
zxAnEthOamErrFrameThreshold The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of ev…	framesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.5.1.10
zxAnEthOamErrFrameEvNotifEnable If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer d…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.61.5.1.11
zxAnEthOamErrFrameSecsSummaryWindow The amount of time (in 100ms intervals) over which the threshold is defined. The default value is 100 (10 seconds). If OamErrFrameSecsSummaryThreshold frame errors occur within a window of OamErrFrameSecsSummaryWindow…	tenths of a secondInteger32r/w Constraints: range: 100-9000	.1.3.6.1.4.1.3902.1015.61.5.1.12
zxAnEthOamErrFrameSecsSummaryThreshold The number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically…	errored frame secondsInteger32r/w Constraints: range: 1-900	.1.3.6.1.4.1.3902.1015.61.5.1.13
zxAnEthOamErrFrameSecsEvNotifEnable If true, the local OAM entity should send an Event Notification OAMPDU when an Errored Frame Seconds Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.61.5.1.14
zxAnEthOamDyingGaspEnable If true, the local OAM entity should attempt to indicate a dying gasp via the OAMPDU flags field to its peer OAM entity when a dying gasp event occurs. The exact definition of a dying gasp event is implementation depe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.61.5.1.15
zxAnEthOamCriticalEventEnable If true, the local OAM entity should attempt to indicate a critical event via the OAMPDU flags to its peer OAM entity when a critical event occurs. The exact definition of a critical event is implementation dependent.…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.61.5.1.16

This table records a history of the events that have occurred at the Ethernet 
OAM level. These events can include locally detected events, which may result 
in locally generated OAMPDUs, and remotely detected events, which are detected 
by the OAM peer entity and signaled to the local entity via Ethernet OAM. 
Ethernet OAM events can be signaled by Event Notification OAMPDUs or by the 
flags field in any OAMPDU. This table contains both threshold crossing events 
and non-threshold crossing events. The parameters for the threshold window, 
threshold value, and actual value (OamEventLogWindowXX, OamEventLogThresholdXX, 
OamEventLogValue) are only applicable to threshold crossing events, and 
are returned as all F's (2^32 - 1) for non-threshold crossing events. Entries 
in the table are automatically created when such events are detected. The size 
of the table is implementation dependent. When the table reaches its maximum 
size, older entries are automatically deleted to make room for newer entries.

zxAnEthOamEventLogEntry row .1.3.6.1.4.1.3902.1015.61.6.1

An entry in the OamEventLogTable. Entries are automatically created whenever
Ethernet OAM events occur at the local OAM entity, and when Event Notification
OAMPDUs are received at the local OAM entity (indicating even…

Indexes

RFC1213-MIBifIndex zxAnEthOamEventLogIndex

Column	Syntax	OID
zxAnEthOamEventLogIndex An arbitrary integer for identifiying individual events within the event log.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.6.1.1
zxAnEthOamEventLogTimestamp The value of sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For remotely generated events, the time of the event is indicated…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.3902.1015.61.6.1.2
zxAnEthOamEventLogOui The OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of 0x0180C2. Organizations defining th…	Dot3Oui Type Constraints: range: 3	.1.3.6.1.4.1.3902.1015.61.6.1.3
zxAnEthOamEventLogType The type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSymbolEvent(1), erroredFramePeriodEvent (2), erroredFrameEv…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.6.1.4
zxAnEthOamEventLogLocation Whether this event occurred locally (local(1)), or was received from the OAM peer via Ethernet OAM (remote(2)).	Enumeration Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.3902.1015.61.6.1.5
zxAnEthOamEventLogWindowHi If the event represents a threshold crossing event, the two objects OamEventWindowHi and OamEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the threshold crossi…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.6.1.6
zxAnEthOamEventLogWindowLo If the event represents a threshold crossing event, the two objects OamEventWindowHi and OamEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the threshold crossin…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.6.1.7
zxAnEthOamEventLogThresholdHi If the event represents a threshold crossing event, the two objects OamEventThresholdHi and OamEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold crossing event (for…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.6.1.8
zxAnEthOamEventLogThresholdLo If the event represents a threshold crossing event, the two objects OamEventThresholdHi and OamEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold crossing event (for…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.6.1.9
zxAnEthOamEventLogValue If the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (for example, 11, when 11 occurrences happened in 5 seconds while t…	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.3902.1015.61.6.1.10
zxAnEthOamEventLogRunningTotal Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the event has been transmitted. For non-threshold crossing ev…	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.3902.1015.61.6.1.11
zxAnEthOamEventLogEventTotal Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the event has been transmitted. For non-threshold crossing ev…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.61.6.1.12