ZTE-AN-CFM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
81

zxAnCfmMaNetTable

table
.1.3.6.1.4.1.3902.1015.62.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnCfmMaNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-CFM-MIB::zxAnCfmMaNetTable' 
The Maintenance Association table.  Each row in the table
represents an MA.  An MA is a set of MEPs, each configured
with a single service instance.
          
This is the part of the complete MA table that is constant
across all Bridges in a Maintenance Domain, and across all
components of a single Bridge.  That part of the MA table that
can vary from Bridge component to Bridge component is contained
in the dot1agCfmMaCompTable.
          
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs.  Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity.  The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance.  Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances.  A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clauses 3.19 and 18.2).
          
This table uses two indices, first index is the index of the
Maintenance Domain table.  The second index is the same as the
index of the dot1agCfmMaCompEntry for the same MA.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.
zxAnCfmMaNetEntry row .1.3.6.1.4.1.3902.1015.62.1.2.1.1
The MA table entry.
Indexes
No indexes recorded
Column Syntax OID
zxAnCfmMaNetCcmDaType
Indicates the type of CCM DA(destination MAC address),
which should be unicast or multicastclass1.
Enumerationr/w
Enumerated Values:
1unicast
2multicastclass1
 .1.3.6.1.4.1.3902.1015.62.1.2.1.1.1
zxAnCfmMaProtect
Indicates the type of CCM DA(destination MAC address),
which should be unicast or multicastclass1.
Enumerationr/w
Enumerated Values:
1maProtectNothing
2cfmMaProtectVlan
3cfmMaProtectTunnel
4cfmMaProtectPort
5cfmMaProtectLink
 .1.3.6.1.4.1.3902.1015.62.1.2.1.1.2
zxAnCfmMaTunnel
 Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.1015.62.1.2.1.1.3

zxAnCfmMepTable

table
.1.3.6.1.4.1.3902.1015.62.1.3.1 · 1 row entry · 66 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnCfmMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-CFM-MIB::zxAnCfmMepTable' 
CFM Mep Table
zxAnCfmMepEntry row .1.3.6.1.4.1.3902.1015.62.1.3.1.1
CFM Mep Entry
Indexes
No indexes recorded
Column Syntax OID
zxAnCfmMepCcCheckEnable
Enabled or disabled the CCM frame defect checking.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.1
zxAnCfmMepLmEnable
Enabled or disabled the ETH-LM functions.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.2
zxAnCfmMepDmEnable
Enabled or disabled the ETH-DM functions.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.3
zxAnCfmMepLbmTestType
Indicates the type of ETH-LBM is unicast or multicast.
Enumerationr/w
Enumerated Values:
1unicast
2multicastclass1
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.4
zxAnCfmMepLbmAppType
Indicates the app type of ETH-LBM, which means to verify
bidirectional connectivity of a MEP with a MIP or a peer MEP,
or to perform a bidirectional in-service or out-of-service
diagnostics test between a pair of pee…
Enumerationr/w
Enumerated Values:
1connectivity
2outofservicediagnostic
3inservicediagnostic
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.5
zxAnCfmMepLmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
dot1agCfmMepLmTargetIsMepId is 'false'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.6
zxAnCfmMepLmTargetMepId
An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
d…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.7
zxAnCfmMepLmTargetIsMepId
True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for LM transmission.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.8
zxAnCfmMepLmmDaType
Indicates the da type of LMM.
Enumerationr/w
Enumerated Values:
1unicast
2multicastclass1
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.9
zxAnCfmMepLmEndType
Indicates the end type of ETH-LM, which should be one-ended
or two-ended.
Enumerationr/w
Enumerated Values:
1oneended
2twoended
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.10
zxAnCfmMepLmInterval
The interval at which LMMs are sent by a MEP, the default
value is 5 seconds.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.11
zxAnCfmMepLmDuration
The time of duration of ETH-LM test, the default value is
60 seconds.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.12
zxAnCfmMepLmPriority
The priority value for LMMs transmitted by the MEP.
Default Value is the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the default value for t…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.13
zxAnCfmMepLmFarendLoss
The number of far-end frame loss.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.14
zxAnCfmMepLmNearendLoss
The number of near-end frame loss.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.15
zxAnCfmMepLmLossRatio
The near-end frame loss ratio in percent.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.16
zxAnCfmMepLmStatus
A Boolean flag set to true by the MEP LM Initiator State
Machine or an MIB manager to indicate
that another LM is being transmitted.
Reset to false by the MEP LM Initiator State Machine.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.17
zxAnCfmMepLmResultOk
Indicates the result of the operation:

- true The Loss Measurement Message(s) will be
(or has been) sent.
- false The Loss Measurement Message(s) will not
be sent.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.18
zxAnCfmMepLmFarendLossRatio
The far-end frame loss ratio in percent.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.19
zxAnCfmMepDmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
dot1agCfmMepDmTargetIsMepId is 'false'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.30
zxAnCfmMepDmTargetMepId
An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
d…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.31
zxAnCfmMepDmTargetIsMepId
True indicates that MEPID of the target MEP is used for Linktrace
transmission.
False indicates that unicast destination MAC address of the
target MEP is used for DM transmission.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.32
zxAnCfmMep1dmDaType
The da type of 1DM.
Enumerationr/w
Enumerated Values:
1unicast
2multicastclass1
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.33
zxAnCfmMepDdmDaType
The da type of DDM.
Enumerationr/w
Enumerated Values:
1unicast
2multicastclass1
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.34
zxAnCfmMepDmWayType
The DM way type.
Enumerationr/w
Enumerated Values:
1oneway
2twoway
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.35
zxAnCfmMepDmInterval
The interval at which DMMs are sent by a MEP, the default value
is 5 seconds.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.36
zxAnCfmMepDmDuration
The time of duration of ETH-DM test, the default value is
60 seconds.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.37
zxAnCfmMepDmPriority
The priority value for DMMs transmitted by the MEP.
Default Value is the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the default value for t…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.38
zxAnCfmMepDmOneWayAvgDelay
The number of One-way Frame Delay.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.39
zxAnCfmMepDmOneWayAvgDv
The number of One-way Frame Delay variation.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.40
zxAnCfmMepDmTwoWayAvgDelay
The number of Two-way Frame Delay.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.41
zxAnCfmMepDmTwoWayAvgDv
The number of Two-way Frame Delay variation.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.42
zxAnCfmMepDmStatus
A Boolean flag set to true by the MEP DM Initiator State
Machine or an MIB manager to indicate that another LBM is
being transmitted.
Reset to false by the MEP DM Initiator State Machine.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.43
zxAnCfmMepDmResultOk
Indicates the result of the operation:

- true The Delay Measurement Message(s) will be
(or has been) sent.
- false The Delay Measurement Message(s) will not
be sent.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.44
zxAnCfmMepTestTlvLength
The length of test TLV.
This object can be used if the value of the column
zxAnCfmMepTestTlvEnable is 'enable'.
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.54
zxAnCfmMepTestEnable
Enabled or disabled the ETH-Test functions.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.55
zxAnCfmMepTestAppType
Indicates the app type of ETH-Test, which means to
perform a bidirectional in-service or out-of-service
diagnostics test between a pair of peer MEPs.
This includes verifying bandwidth throughput, frame loss, bit
error…
Enumerationr/w
Enumerated Values:
1inServiceDiagnostic
2outOfServiceDiagnostic
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.56
zxAnCfmMepTestDestMacAddress
The destination MAC address field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
zxAnCfmMepTestDestIsMepId is 'false'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.57
zxAnCfmMepTestDestMepId
The maintenance association end point identifier of another
MEP in the same maintenance association to which the ETH-Test
message is to be sent.
This address will be used if the value of the column
zxAnCfmMepTestDestIs…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.58
zxAnCfmMepTestDestIsMepId
True indicates that MEPID of the destination MEP is used for
ETH-Test transmission.
False indicates that unicast destination MAC address of the
target MEP is used for ETH-Test transmission.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.59
zxAnCfmMepTestInterval
The interval value for ETH-Test messages transmitted by the MEP.
the default value is 1000 milliseconds.
millisecondsInteger32r/w
Constraints:
range: 100-10000
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.60
zxAnCfmMepTestDuration
The time of duration of ETH-Test, the default value is
60 seconds.
secondsInteger32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.61
zxAnCfmMepTestPriority
The priority value for ETH-Test Messages transmitted by the MEP.
Default value is the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the defaul…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.62
zxAnCfmMepTestDaType
The destination address type of ETH-Test Message.
Enumerationr/w
Enumerated Values:
1unicast
2multicastClass1
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.63
zxAnCfmMepTestTlvEnable
Enabled or disabled ETH-Test TLV.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.64
zxAnCfmMepTestPattern
Indicates the test pattern.
This pattern will be used if the value of the column
zxAnCfmMepTestTlvEnable is 'enable'.
Enumerationr/w
Enumerated Values:
1allZeroesWithoutCrc32
2allZeroesWithCrc32
3prbsWithoutCrc32
4prbsWithCrc32
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.65
zxAnCfmMepTestStatus
A Boolean flag set to true by the MEP TEST initiator state
machine or an MIB manager to indicate that another ETH-Test is
being done.
Reset to false by the MEP TEST initiator state machine.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.66
zxAnCfmMepTestResultOk
Indicates the result of the operation:
- true The ETH-Test message(s) will be (or has been) sent.
- false The ETH-Test message(s) will not be sent.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.67
zxAnCfmMepTestMsgSeqNumber
The ETH-Test transaction identifier
(zxAnCfmMepTestNextMsgSeqNumber) of the first ETH-Test
message(to be) sent. The value returned is undefined if
zxAnCfmMepTestResultOk is false.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.68
zxAnCfmMepTestNextMsgSeqNumber
Next sequence number/transaction identifier to be sent in a
ETH-Test message. This sequence number can be zero because
it wraps around.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.69
zxAnCfmMepTestTransmitRate
Indicates the maximum transmission rate at which frames with
ETH-Test information can be sent.
kbpsUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.70
zxAnCfmMepTestFarendLossRatio
The far-end frame loss ratio in percent.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.71
zxAnCfmMepTestFarendBitErrRatio
The far-end received bit error ratio in percent.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.72
zxAnCfmMepAisEnable
Enabled or disabled the ETH-AIS functions.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.87
zxAnCfmMepLckEnable
Enabled or disabled the ETH-LCK functions.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.88
zxAnCfmMepAisClientMegLevel
MEG level at which the most immediate client layer MIPs and MEPs
exist.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.89
zxAnCfmMepLckClientMegLevel
MEG level at which the most immediate client layer MIPs and MEPs
exist.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.90
zxAnCfmMepAisLckInterval
The interval value for AISMs and LCKMs transmitted by the MEP.
the default value is 1 second.
secondsInteger32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.91
zxAnCfmMepAisPriority
The priority value for AISMs transmitted by the MEP.
Default value is the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the default value for …
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.92
zxAnCfmMepLckPriority
The priority value for LCKMs transmitted by the MEP.
Default value is the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the default value for …
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.93
zxAnCfmMepAisDaType
The destination address type of AISM.
Enumerationr/w
Enumerated Values:
1unicast
2multicastClass1
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.94
zxAnCfmMepLckDaType
The destination address type of LCKM.
Enumerationr/w
Enumerated Values:
1unicast
2multicastClass1
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.95
zxAnCfmMepAisStatus
This object represents if MEP is in AIS status or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.96
zxAnCfmMepLckStatus
This object represents if MEP is in LCK status or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.97
zxAnCfmMepLckSendEnable
This object represents if LCK message can be sent by the MEP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.98
zxAnCfmMepRdiStatus
This object represents if MEP is in RDI status or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.62.1.3.1.1.99

zxAnCfmRemoteMepConfTable

table
.1.3.6.1.4.1.3902.1015.62.1.3.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnCfmRemoteMepConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-CFM-MIB::zxAnCfmRemoteMepConfTable' 
Remote Mep Config Table
zxAnCfmRemoteMepConfEntry row .1.3.6.1.4.1.3902.1015.62.1.3.2.1
Remote Mep Config Entry
Indexes
Column Syntax OID
zxAnCfmRemoteMepMacAddress
The MAC address of the remote MEP.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.62.1.3.2.1.1
zxAnCfmRemoteMepConfRowStatus
The rowstatus of this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.62.1.3.2.1.20

zxAnCfmMipTable

table
.1.3.6.1.4.1.3902.1015.62.1.3.3 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnCfmMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-CFM-MIB::zxAnCfmMipTable' 
CFM Mip Table
zxAnCfmMipEntry row .1.3.6.1.4.1.3902.1015.62.1.3.3.1
CFM Mip Entry
Indexes
Column Syntax OID
zxAnCfmMipIfIndex
This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.

Upon a restart of the system, the system SHAL…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.3902.1015.62.1.3.3.1.1
zxAnCfmMipRowStatus
The rowstatus of this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.62.1.3.3.1.20

zxAnCfmIfTable

table
.1.3.6.1.4.1.3902.1015.62.1.5.1 · 1 row entry · 8 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnCfmIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-CFM-MIB::zxAnCfmIfTable' 
The CFM interface table.
This table specifies CFM interface configuration.
zxAnCfmIfEntry row .1.3.6.1.4.1.3902.1015.62.1.5.1.1
The CFM interface entry.
Indexes
Column Syntax OID
zxAnCfmRack
Rack number of the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.5.1.1.1
zxAnCfmShelf
Shelf number of the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.5.1.1.2
zxAnCfmSlot
Slot number of the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.5.1.1.3
zxAnCfmPort
The port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.5.1.1.4
zxAnCfmOnu
The ONU number. It is 0 in DSL port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.62.1.5.1.1.5
zxAnCfmIfType
Type of the interface.
Enumeration
Enumerated Values:
1physicalPort
5onuUni
 .1.3.6.1.4.1.3902.1015.62.1.5.1.1.6
zxAnCfmLogicalId
Logic index of the interface.

If zxAnCfmIfType is 'physicalPort', its value is 0.

If zxAnCfmIfType is 'onuUni', this object
indicates 'onuSlot.uniId', this type is used for SFUs only.
If th…
ObjectIdentifier .1.3.6.1.4.1.3902.1015.62.1.5.1.1.7
zxAnCfmIfOamPduFilterEnable
This object controls whether the Ethernet OAMPDU
filtering is enabled on specific interface. A disable(2) value will
prevent the Ethernet OAMPDU filtering action on specific
interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.62.1.5.1.1.8