ZTE-AN-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
84

zxAnAclTable

table
.1.3.6.1.4.1.3902.1015.23.1.2 · 1 row entry · 27 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclTable' 
Acl Table
zxAnAclEntry row .1.3.6.1.4.1.3902.1015.23.1.2.1
Acl Table
Indexes
Column Syntax OID
zxAnAclIndex
The ACL main index of this table
Integer32
Constraints:
range: 300-349
 .1.3.6.1.4.1.3902.1015.23.1.2.1.1
zxAnAclRuleId
The ACL sub index of this table
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.3902.1015.23.1.2.1.2
zxAnAclAction
The action of this ACL rule.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.3902.1015.23.1.2.1.3
zxAnAclProtocolType
Protocol Type of ip,such as:
ICMP = 1,
IGMP = 2,
IPINIP = 4,
TCP = 6,
EIGR = 8,
IGRP = 9,
UDP = 17,
ICMPv6 = 58,
OSPF = 89,
PIM = 103,
VRRP = 112,
IP = 255
Enumerationr/w
Enumerated Values:
1icmp
2igmp
4ipInIp
6tcp
8eigr
9igrp
17udp
58icmpv6
89ospf
103pim
112vrrp
255ip
 .1.3.6.1.4.1.3902.1015.23.1.2.1.4
zxAnAclSrcIp
The source ip of the ACL rule.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1015.23.1.2.1.5
zxAnAclSrcIpWildcardMask
Wildcard Mask of source ip.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1015.23.1.2.1.6
zxAnAclDestIp
The destination ip of the ACL rule.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1015.23.1.2.1.7
zxAnAclDestIpWildcardMask
Wildcard Mask of destination ip.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1015.23.1.2.1.8
zxAnAclSrcPortOperator
The operator of the source port rule.
Operatorr/w
Type Values:
0none
1eq
2neq
3lt
4gt
5range
 .1.3.6.1.4.1.3902.1015.23.1.2.1.9
zxAnAclSrcPortStart
the start of source port.
Such as:
0,none
21,ftp
23,telnet
25,smtp
53,domain
79,finger
80,http
109,pop2
110,pop3
179,bgp
513,rlogin
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.10
zxAnAclSrcPortEnd
the end of source port
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.11
zxAnAclDestPortOperator
The operator of the destination port rule.
Operatorr/w
Type Values:
0none
1eq
2neq
3lt
4gt
5range
 .1.3.6.1.4.1.3902.1015.23.1.2.1.12
zxAnAclDestPortStart
the end of source port
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.13
zxAnAclDestPortEnd
the end of destination port
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.14
zxAnAclInMAC
In MAC
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.23.1.2.1.15
zxAnAclInMACWildcardMask
Wildcard Mask of in MAC.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.23.1.2.1.16
zxAnAclOutMAC
Out MAC
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.23.1.2.1.17
zxAnAclOutMACWildcardMask
Wildcard Mask of out MAC.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.23.1.2.1.18
zxAnAclEthProtocol
Ethernet Protocol
0x0800 ip
0x0806 arp
Enumerationr/w
Enumerated Values:
2048ip
2054arp
 .1.3.6.1.4.1.3902.1015.23.1.2.1.19
zxAnAclVlanID
VLAN ID
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.20
zxAnAclVlanPri
The priority of the VLAN.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.21
zxAnAclInnerVlan
Inner VLAN
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.22
zxAnAclInnerVlanPri
The priority of the inner VLAN.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.23
zxAnAclMinVlanID
VLAN ID
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.24
zxAnAclMaxVlanID
VLAN ID
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.2.1.25
zxAnAclDscp
dscp
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.23.1.2.1.26
zxAnBasicAclRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.2.1.50

zxAnAclExTable

table
.1.3.6.1.4.1.3902.1015.23.1.3 · 1 row entry · 7 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAclExTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclExTable' 
Acl Table
zxAnAclExEntry row .1.3.6.1.4.1.3902.1015.23.1.3.1
Acl Table
Indexes
Column Syntax OID
zxAnAclExIndex
The ACL main index of this table
Integer32
Constraints:
range: 100-199
 .1.3.6.1.4.1.3902.1015.23.1.3.1.1
zxAnAclExRuleId
The ACL sub index of this table
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.3902.1015.23.1.3.1.2
zxAnAclExTos
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.3.1.3
zxAnAclExDscp
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.3.1.4
zxAnAclExAction
 Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.3902.1015.23.1.3.1.5
zxAnAclTtl
valid 0-255
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.3.1.6
zxAnAclExRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.3.1.50

zxAnAclQosTrafficTable

table
.1.3.6.1.4.1.3902.1015.23.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAclQosTrafficTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclQosTrafficTable' 
Acl Table
zxAnAclQosTrafficEntry row .1.3.6.1.4.1.3902.1015.23.1.4.1
Acl Table
Indexes
Column Syntax OID
zxAnAclQosTrafficLimitCir
Committed Information Rate(CIR) in kbps.
Integer32r/w
Constraints:
range: 64-32000000
 .1.3.6.1.4.1.3902.1015.23.1.4.1.1
zxAnAclQosTrafficLimitPir
Peak Information Rate(PIR) in kbps.
Integer32r/w
Constraints:
range: 64-32000000
 .1.3.6.1.4.1.3902.1015.23.1.4.1.2
zxAnAclQosTrafficLimitCbs
Committed Burst Rate(CBS) in kbyte.
Integer32r/w
Constraints:
range: 4-16000
 .1.3.6.1.4.1.3902.1015.23.1.4.1.3
zxAnAclQosTrafficLimitEbs
ebs in kbps.
Integer32r/w
Constraints:
range: 64-32000000
 .1.3.6.1.4.1.3902.1015.23.1.4.1.4
zxAnAclQosTrafficLimitPbs
ebs in kbps.
Integer32r/w
Constraints:
range: 64-32000000
 .1.3.6.1.4.1.3902.1015.23.1.4.1.5
zxAnAclQosTrafficLimitMode
ebs in kbps.
Enumerationr/w
Enumerated Values:
1blind
2aware
 .1.3.6.1.4.1.3902.1015.23.1.4.1.6
zxAnAclQosTrafficRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.4.1.30

zxAnAclQosPriorityMarkTable

table
.1.3.6.1.4.1.3902.1015.23.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAclQosPriorityMarkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclQosPriorityMarkTable'
zxAnAclQosPriorityMarkEntry row .1.3.6.1.4.1.3902.1015.23.1.5.1
Indexes
Column Syntax OID
zxAnAclQosPriMarkDscp
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.5.1.1
zxAnAclQosPriMarkUserPriority
 SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.5.1.2
zxAnAclQosPriMarkRowStatus
 SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.5.1.30

zxAnAclQosStatisticTable

table
.1.3.6.1.4.1.3902.1015.23.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAclQosStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclQosStatisticTable' 
A list of AclQos statistic data entries.
zxAnAclQosStatisticEntry row .1.3.6.1.4.1.3902.1015.23.1.6.1
An entry containing AclQos statistic data.
Indexes
Column Syntax OID
zxAnAclQosStatistInPkg
The number of packets, delivered by this VclQos rule to a
higher (sub-)layer.Discontinuities in the value of this
counter can occur at re-initialization of the management
system.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.23.1.6.1.1
zxAnAclQosStatistRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.6.1.50

zxAnAclQosQinqTable

table
.1.3.6.1.4.1.3902.1015.23.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAclQosQinqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclQosQinqTable' 
A list of AclQos Qinq data entries.
zxAnAclQosQinqEntry row .1.3.6.1.4.1.3902.1015.23.1.7.1
An entry containing AclQos Qinq data.
Indexes
Column Syntax OID
zxAnAclQosQinqSvlan
VLAN ID,vlaid range 1-4095
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.7.1.1
zxAnAclQosQinqCvlan
VLAN ID,vlaid range 1-4095
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.7.1.2
zxAnAclQosQinqRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.7.1.30

zxAnAclQosRedirectTable

table
.1.3.6.1.4.1.3902.1015.23.1.8 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAclQosRedirectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnAclQosRedirectTable' 
A list of AclQos Redirect data entries.
zxAnAclQosRedirectEntry row .1.3.6.1.4.1.3902.1015.23.1.8.1
An entry containing AclQos Redirect data.
Indexes
Column Syntax OID
zxAnAclQosRedirectMode
The redirect mode for this entry.
Enumerationr/w
Enumerated Values:
1cpu
2interface
3nextHop
 .1.3.6.1.4.1.3902.1015.23.1.8.1.1
zxAnAclQosRedirectPktLimit
For redirect to cpu. The specified packet limit size, redirect takes effect before this size reached.
Integer32r/w
Constraints:
range: 1-500
 .1.3.6.1.4.1.3902.1015.23.1.8.1.2
zxAnAclQosRedirectInterface
For redirect to interface. Uplink port ifId.
ZTE-AN-TC-MIBZxAnIfindexr/w .1.3.6.1.4.1.3902.1015.23.1.8.1.3
zxAnAclQosRedirectIpAddress
For redirect to next hop. The next hop ipaddress.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1015.23.1.8.1.4
zxAnAclQosRedirectRowStatus
RowStatus of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.8.1.30

zxAnUniAclClassTable

table
.1.3.6.1.4.1.3902.1015.23.1.11 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnUniAclClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnUniAclClassTable' 
The (conceptual) table listing all Acl class.
zxAnUniAclClassEntry row .1.3.6.1.4.1.3902.1015.23.1.11.1
An entry (conceptual row) representing a Acl class.
Indexes
Column Syntax OID
zxAnUniAclClassName
The name of this Acl class referred to in this table entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.23.1.11.1.1
zxAnUniAclClassMatch
The string contains one class's qualification and its meansing is defined before.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1015.23.1.11.1.2
zxAnUniAclClassRowStatus
RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.11.1.50

zxAnUniAclPolicyTable

table
.1.3.6.1.4.1.3902.1015.23.1.12 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnUniAclPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnUniAclPolicyTable' 
The (conceptual) table listing all Acl policy.
zxAnUniAclPolicyEntry row .1.3.6.1.4.1.3902.1015.23.1.12.1
An entry (conceptual row) representing a Acl Policy.
Indexes
Column Syntax OID
zxAnUniAclPolicyName
The name of this Acl policy referred to in this table entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.23.1.12.1.1
zxAnUniAclPolicyRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.12.1.50

zxAnUniAclPolicyConfigTable

table
.1.3.6.1.4.1.3902.1015.23.1.13 · 1 row entry · 22 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnUniAclPolicyConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnUniAclPolicyConfigTable' 
The policy configuration table listing all Acl policy.
zxAnUniAclPolicyConfigEntry row .1.3.6.1.4.1.3902.1015.23.1.13.1
An entry (conceptual row) representing a Acl policy.
Indexes
Column Syntax OID
zxAnUniAclPolicyAction
If it is enabled, the flow will be denied
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.3902.1015.23.1.13.1.1
zxAnUniAclPolicyCir
Committed Information Rate:the config Committed rate in kbps.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.13.1.2
zxAnUniAclPolicyCbs
Committed Burst Size:the Committed burst size of the corresponding
token barrel of the class in byte.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.13.1.3
zxAnUniAclPolicyExceedAction
The mib means the acion would be taken if the flow of the class exceeds
the config rate. And if the acion is 1(drop),it means the flow will be droped at all.
However the following mib zxAnUniAclPolicyExceedActValue has…
Enumerationr/w
Enumerated Values:
1drop
2setDSCP
3setCos
 .1.3.6.1.4.1.3902.1015.23.1.13.1.4
zxAnUniAclPolicyExceedActValue
if the zxAnUniAclPolicyExceedAction mib = 2(SetDSCP) ,the mib's meaning is the value wanted.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.13.1.5
zxAnUniAclPolicyActionSCos
If the flow is classified, the action can be changed the COS value in the flow by SVID.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.23.1.13.1.6
zxAnUniAclPolicyActionDSCP
If the flow is classified, the action can be changed the DSCP value in the flow .
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.23.1.13.1.7
zxAnUniAclPolicyActionVLAN
If the flow is classified, the action can be changed the Vlan ID value in the flow .
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3902.1015.23.1.13.1.8
zxAnUniAclPolicyActionRedirectedTo
If the flow is classified, the action can be changed the Port value in the flow .
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.13.1.9
zxAnUniAclPolicyActionMirroredTo
If the flow is classified, the action can be mirrored.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.23.1.13.1.10
zxAnUniAclPolicyActionISStatistics
If it is enabled, the flow's statistics will be started
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.23.1.13.1.11
zxAnUniAclPolicyActionCCos
If the flow is classified, the action can be changed the COS value in the flow by CVID.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.23.1.13.1.12
zxAnUniAclPolicyPir
Peak Information Rate:the config peak rate in kbps.
Integer32r/w
Constraints:
range: 512-128000
 .1.3.6.1.4.1.3902.1015.23.1.13.1.13
zxAnUniAclPolicyPbs
Peak Burst Size:the peak burst size of the corresponding
token barrel of the class in byte.
Integer32r/w
Constraints:
range: 2000-2047
 .1.3.6.1.4.1.3902.1015.23.1.13.1.14
zxAnUniAclPolicyTrtcmExceedAction
trTCM means Two Rate Three Color Marker. The mib means the action
would be taken if the flow of the class exceeds the traffic limit.
Enumerationr/w
Enumerated Values:
-286331154notSet
1dropYellow
2forwardRed
 .1.3.6.1.4.1.3902.1015.23.1.13.1.15
zxAnUniAclPolicyTrtcmRemarkRedDscp
If the packet is marked red, the action can be changed the DSCP value.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.23.1.13.1.16
zxAnUniAclPolicyTrtcmRemarkYellowDscp
If the packet is marked yellow, the action can be changed the DSCP value .
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.23.1.13.1.17
zxAnUniAclPolicyTrtcmRemarkGreenDscp
If the packet is marked green, the action can be changed the DSCP value .
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.23.1.13.1.18
zxAnUniAclPolicyTrtcmRemarkRedCos
If the packet is marked red, the action can be changed the COS value.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.23.1.13.1.19
zxAnUniAclPolicyTrtcmRemarkYellowCos
If the packet is marked yellow, the action can be changed the COS value.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.23.1.13.1.20
zxAnUniAclPolicyTrtcmRemarkGreenCos
If the packet is marked green, the action can be changed the COS value.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.23.1.13.1.21
zxAnUniAclPolicyStatus
RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.13.1.50

zxAnUniAclBindTable

table
.1.3.6.1.4.1.3902.1015.23.1.14 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnUniAclBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ACL-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ACL-MIB::zxAnUniAclBindTable' 
The Acl policy table being applied on one physical port.This table 
includes Acl bind.It is used for a user-side port(interface)
zxAnUniAclBindEntry row .1.3.6.1.4.1.3902.1015.23.1.14.1
An entry of zxAnUniAclBindTable.
Indexes
Column Syntax OID
zxAnUniIfAclPolicyName
The applied policy index of a user-side port(interface)
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.23.1.14.1.1
zxAnUniAclBindDir
Bind diraction,Ingress or Egress
Enumerationr/w
Enumerated Values:
1ingress
2egress
3both
 .1.3.6.1.4.1.3902.1015.23.1.14.1.2
zxAnUniAclBindRowStatus
The Row status of this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.23.1.14.1.50