ZHONE-MAU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

zhoneIfMauTable

table

.1.3.6.1.4.1.5504.5.1.1 · 1 row entry · 21 columns

Open in standard view

Uses the zhone variant from /opt/observium/mibs/zhone.

Command help

Walk zhoneIfMauTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHONE-MAU-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHONE-MAU-MIB::zhoneIfMauTable'

Table of descriptive and status information
about the phsyical Enet	interface.

zhoneIfMauEntry row .1.3.6.1.4.1.5504.5.1.1.1

An entry in the table, containing information
about a single physical Enet interface.

Indexes

zhoneMauIfIndex

Column Syntax OID

zhoneMauIfIndex

This variable uniquely identifies the interface
to which the Ethernet/MAU described by this entry
is connected.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.5504.5.1.1.1.1

zhoneMauType

Physical Interface Type

Enumerationr/w

Enumerated Values:

1	mauOther
5	mau10BaseT
10	mau10BaseTHD
11	mau10BaseTFD
15	mau100BaseTXHD
16	mau100BaseTXFD
22	mau1000BaseLXHD
23	mau1000BaseLXFD
25	mau1000BaseSXHD
26	mau1000BaseSXFD
29	mau1000BaseTHD
30	mau1000BaseTFD
31	mau10gBaseX
32	mau10gBaseR
33	mau10gBaseW
34	mau10gBaseLX4
35	mau10gBaseSR
36	mau10gBaseSW
37	mau10gBaseLR
38	mau10gBaseLW
39	mau10gBaseER
40	mau10gBaseEW

.1.3.6.1.4.1.5504.5.1.1.1.2

zhoneMauOperStatus

The current operational state of the MAU.

other(1) is returned if the MAU or interface is in
a state other than one of the states 2 through 6.

unknown(2) is returned when the true state of …

Enumeration

Enumerated Values:

1	other
2	unknown
3	operational
4	standby
5	shutdown
6	reset

.1.3.6.1.4.1.5504.5.1.1.1.3

zhoneMauMediaAvailable

If the MAU or interface is a link or fiber type
(FOIRL, 10BASE-T, 10BASE-F) then this is
equivalent to the link test fail state/low light
function. For an AUI MAU this indicates whether
or not loopback is detected on th…

Enumeration

Enumerated Values:

1	other
2	unknown
3	available
4	notAvailable
5	remoteFault
6	invalidSignal
7	remoteJabber
8	remoteLinkLoss
9	remoteTest
10	offline
11	autoNegError

.1.3.6.1.4.1.5504.5.1.1.1.4

zhoneMauMediaAvailStateExits

A count of the number of times that
zhoneMauMediaAvailable for this MAU or interface
instance leaves the state available(3).

Discontinuities in the value of this counter can
occur at re-initialization of …

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.5504.5.1.1.1.5

zhoneMauJabberState

The value other(1) is returned if the jabber
state is not 2, 3, or 4.

unknown(2) is returned when the MAU's true state
is unknown; e.g. when it is being initialized.

If the MAU is not jabbe…

Enumeration

Enumerated Values:

1	other
2	unknown
3	noJabber
4	jabbering

.1.3.6.1.4.1.5504.5.1.1.1.6

zhoneMauJabberingStateEnters

A count of the number of times that
zhoneMauJabberState for this MAU or interface
instance enters the state jabbering(4). This
counter will always indicate zero for MAUs of
ype dot1MauTypeAUI and those of speeds above
…

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.5504.5.1.1.1.7

zhoneMauFalseCarriers

A count of the number of false carrier events
during IDLE in 100BASE-X and 1000BASE-X links.

For all other MAU or inetrafce types, this counter
will always indicate zero. This counter does not
increment a…

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.5504.5.1.1.1.8

zhoneMauDefaultType

Physical interface type.

Enumeration

Enumerated Values:

1	mauOther
5	mau10BaseT
10	mau10BaseTHD
11	mau10BaseTFD
15	mau100BaseTXHD
16	mau100BaseTXFD
22	mau1000BaseLXHD
23	mau1000BaseLXFD
25	mau1000BaseSXHD
26	mau1000BaseSXFD
29	mau1000BaseTHD
30	mau1000BaseTFD
31	mau10gBaseX
32	mau10gBaseR
33	mau10gBaseW
34	mau10gBaseLX4
35	mau10gBaseSR
36	mau10gBaseSW
37	mau10gBaseLR
38	mau10gBaseLW
39	mau10gBaseER
40	mau10gBaseEW

.1.3.6.1.4.1.5504.5.1.1.1.9

zhoneMauAutoNegSupported

This object indicates whether or not
auto-negotiation is supported.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.5504.5.1.1.1.10

zhoneMauTypeListBits

A value that uniquely identifies the set of
possible IEEE 802.3 types that the MAU could be.
If auto-negotiation is present on this MAU, this
object will map to ifMauAutoNegCapability.

Note that this MAU …

Bits

Enumerated Values:

0	bOther
1	bAUI
2	b10base5
3	bFoirl
4	b10base2
5	b10baseT
6	b10baseFP
7	b10baseFB
8	b10baseFL
9	b10broad36
10	b10baseTHD
11	b10baseTFD
12	b10baseFLHD
13	b10baseFLFD
14	b100baseT4
15	b100baseTXHD
16	b100baseTXFD
17	b100baseFXHD
18	b100baseFXFD
19	b100baseT2HD
20	b100baseT2FD
21	b1000baseXHD
22	b1000baseXFD
23	b1000baseLXHD
24	b1000baseLXFD
25	b1000baseSXHD
26	b1000baseSXFD
27	b1000baseCXHD
28	b1000baseCXFD
29	b1000baseTHD
30	b1000baseTFD
31	b10gbaseX
32	b10gbaseR
33	b10gbaseW
34	b10gbaseLX4
35	b10gbaseSR
36	b10gbaseSW
37	b10gbaseLR
38	b10gbaseLW
39	b10gbaseER
40	b10gbaseEW

.1.3.6.1.4.1.5504.5.1.1.1.11

zhoneMauClkSrc

Clock source for timing.
Unused - unused
Automatic - Master/Slave is decided during autonegotiation
Master - Clocked from local source
Slave - Loop timing from the received data stream

Enumerationr/w

Enumerated Values:

1	unused
2	automatic
3	master
4	slave

.1.3.6.1.4.1.5504.5.1.1.1.12

zhoneMauPauseFlowControl

When autonegotiation is enabled (zhoneMauAutoNegSupported is true),
this Pause Flow Control field is used to program the advertised
pause capabilities.

When autonegotiation is disabled (manual negotiation…

Enumerationr/w

Enumerated Values:

1	disabled
2	asymmetricTx
3	asymmetricRx
4	symmetric
5	passthrough

.1.3.6.1.4.1.5504.5.1.1.1.13

zhoneMauAggregationMode

On: The link aggregation is forced to be formed without any
LACP negotiation .In other words, the switch will neither send the
LACP packet nor process any incoming LACP packet. This is similar
to the on state for PAgP.
…

Enumerationr/w

Enumerated Values:

1	on
2	off
3	passive
4	active

.1.3.6.1.4.1.5504.5.1.1.1.14

zhoneMauLinkStateMirror

ifIndex of another physical interface whose link state will be mirrored on
this MAU. This is used to propagate a link fault observed on one physical
interface onto another interface.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.5504.5.1.1.1.15

zhoneMauSetPauseTime

Used to set the pause interval. Units are in pause_quanta.

Currently not supported.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.5504.5.1.1.1.16

zhoneMauMaxFrameSize

Used to set the max frame size for ethernet ports.
Units are bytes. Range is 0 15360. 0 is default implying 2048 bytes.

Integer32r/w

Constraints:
range: 0-15360

.1.3.6.1.4.1.5504.5.1.1.1.17

zhoneMauIngressRate

Used to set the ingress rate for ethernet ports.
Units are Kbps. Range is 0 10Gbps. 0 is default implying no limit.

KbpsInteger32r/w

Constraints:
range: 0-10240000

.1.3.6.1.4.1.5504.5.1.1.1.18

zhoneMauIngressBurstSize

Used to set the ingress burst size for ethernet ports.
Units are Kbits. Range is 0 512000. 0 is default implying no restriction.

KbitsInteger32r/w

Constraints:
range: 0-512000

.1.3.6.1.4.1.5504.5.1.1.1.19

zhoneMauEgressRate

Used to set the egress rate for ethernet ports.
Units are Kbps. Range is 0 10Gbps. 0 is default implying no limit.

KbpsInteger32r/w

Constraints:
range: 0-10240000

.1.3.6.1.4.1.5504.5.1.1.1.20

zhoneMauEgressBurstSize

Used to set the egress burst size for ethernet ports.
Units are Kbits. Range is 0 512000. 0 is default implying no restriction.

KbitsInteger32r/w

Constraints:
range: 0-512000

.1.3.6.1.4.1.5504.5.1.1.1.21

zhoneMauAutoNegTable

table

.1.3.6.1.4.1.5504.5.1.2 · 1 row entry · 9 columns

Open in standard view

Uses the zhone variant from /opt/observium/mibs/zhone.

Command help

Walk zhoneMauAutoNegTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHONE-MAU-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHONE-MAU-MIB::zhoneMauAutoNegTable'

Configuration and status objects for the
auto-negotiation function of MAUs attached to
interfaces.

zhoneMauAutoNegEntry row .1.3.6.1.4.1.5504.5.1.2.1

An entry in the table, containing configuration
and status information for the auto-negotiation
function of a particular MAU.

Indexes

zhoneMauIfIndex

Column Syntax OID

zhoneMauAutoNegAdminStatus

Setting this object to enabled(1) will cause
the interface which has the auto-negotiation
signaling ability to be enabled.

If the value of this object is disabled(2) then
the interface will act as it woul…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.5504.5.1.2.1.1

zhoneMauAutoNegRemoteSignaling

A value indicating whether the remote end of
the link is using auto-negotiation signaling. It
takes the value detected(1) if and only if,
during the previous link negotiation, FLP Bursts
were received.

Enumeration

Enumerated Values:

1	detected
2	notdetected

.1.3.6.1.4.1.5504.5.1.2.1.2

zhoneMauAutoNegConfig

A value indicating the current status of the
auto-negotiation process. The enumeration
parallelDetectFail(5) maps to a failure in
parallel detection as defined in 28.2.3.1 of
[IEEE 802.3 Std].

Enumeration

Enumerated Values:

1	other
2	configuring
3	complete
4	disabled
5	parallelDetectFail

.1.3.6.1.4.1.5504.5.1.2.1.3

zhoneMauAutoNegRestart

If the value of this object is set to restart(1)
then this will force auto-negotiation to begin
link renegotiation. If auto-negotiation signaling
is disabled, a write to this object
has no effect.

Setting…

Enumerationr/w

Enumerated Values:

1	restart
2	norestart

.1.3.6.1.4.1.5504.5.1.2.1.4

zhoneMauAutoNegCapabilityBits

A value that uniquely identifies the set of
capabilities of the local auto-negotiation
entity. Note that interfaces that support this
MIB may have capabilities that extend beyond the
scope of this MIB.

N…

Bits

Enumerated Values:

0	bOther
1	b10baseT
2	b10baseTFD
3	b100baseT4
4	b100baseTX
5	b100baseTXFD
6	b100baseT2
7	b100baseT2FD
8	bfdxPause
9	bfdxAPause
10	bfdxSPause
11	bfdxBPause
12	b1000baseX
13	b1000baseXFD
14	b1000baseT
15	b1000baseTFD
16	b10gbaseX
17	b10gbaseR
18	b10gbaseW
19	b10gbaseLX4
20	b10gbaseSR
21	b10gbaseSW
22	b10gbaseLR
23	b10gbaseLW
24	b10gbaseER
25	b10gbaseEW

.1.3.6.1.4.1.5504.5.1.2.1.5

zhoneMauAutoNegCapAdvertBits

A value that uniquely identifies the set of
capabilities advertised by the local
auto-negotiation entity.

Capabilities in this object that are not
available in ifMauAutoNegCapabilityBits cannot
be enabled…

Bitsr/w

Enumerated Values:

0	bOther
1	b10baseT
2	b10baseTFD
3	b100baseT4
4	b100baseTX
5	b100baseTXFD
6	b100baseT2
7	b100baseT2FD
8	bFdxPause
9	bFdxAPause
10	bFdxSPause
11	bFdxBPause
12	b1000baseX
13	b1000baseXFD
14	b1000baseT
15	b1000baseTFD
16	b10gbaseX
17	b10gbaseR
18	b10gbaseW
19	b10gbaseLX4
20	b10gbaseSR
21	b10gbaseSW
22	b10gbaseLR
23	b10gbaseLW
24	b10gbaseER
25	b10gbaseEW

.1.3.6.1.4.1.5504.5.1.2.1.6

zhoneMauAutoNegCapRecvBits

A value that uniquely identifies the set of
capabilities received from the remote
auto-negotiation entity.

Note that interfaces that support this MIB may
be attached to remote auto-negotiation entities
wh…

Bits

Enumerated Values:

0	bOther
1	b10baseT
2	b10baseTFD
3	b100baseT4
4	b100baseTX
5	b100baseTXFD
6	b100baseT2
7	b100baseT2FD
8	bFdxPause
9	bFdxAPause
10	bFdxSPause
11	bFdxBPause
12	b1000baseX
13	b1000baseXFD
14	b1000baseT
15	b1000baseTFD
16	b10gbaseX
17	b10gbaseR
18	b10gbaseW
19	b10gbaseLX4
20	b10gbaseSR
21	b10gbaseSW
22	b10gbaseLR
23	b10gbaseLW
24	b10gbaseER
25	b10gbaseEW

.1.3.6.1.4.1.5504.5.1.2.1.7

zhoneMauAutoNegRemoteFaultAdvert

A value that identifies any local fault
indications that this MAU has detected and will
advertise at the next auto-negotiation
interaction for 1000Mbps MAUs.

Enumerationr/w

Enumerated Values:

1	noError
2	offline
3	linkFailure
4	autoNegError

.1.3.6.1.4.1.5504.5.1.2.1.8

zhoneMauAutoNegRemoteFaultRecv

A value that identifies any fault indications
received from the far end of a link by the
local auto-negotiation entity for 1000Mbps
MAUs.

Enumeration

Enumerated Values:

1	noError
2	offline
3	linkFailure
4	autoNegError

.1.3.6.1.4.1.5504.5.1.2.1.9

zhoneLinkAggTable

table

.1.3.6.1.4.1.5504.5.1.4 · 1 row entry · 4 columns

Open in standard view

Uses the zhone variant from /opt/observium/mibs/zhone.

Command help

Walk zhoneLinkAggTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHONE-MAU-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHONE-MAU-MIB::zhoneLinkAggTable'

Table of Identifiers specifying the partner system to which an	aggregation is connected.

zhoneLinkAggEntry row .1.3.6.1.4.1.5504.5.1.4.1

An entry in the table, containing information
about a single partner system aggregation.

Indexes

zhoneLinkAggIfIndex

Column	Syntax	OID
zhoneLinkAggIfIndex This variable uniquely identifies the link aggregation by which the profile described in this entry is identified.	Integer32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.5504.5.1.4.1.1`
zhoneLinkAggPartnerSystem A six-byte identifier, similar to a MAC address, specifying the partner system, but stored as a string, and specified in the pattern 'nn:nn:nn:nn:nn:nn', where 'nn' is a hex number specifying a byte of the pattern.	OctetString Constraints: `range: 0-18`	`.1.3.6.1.4.1.5504.5.1.4.1.2`
zhoneLinkAggPartnerSystemPriority An integer further specifying the partner system.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5504.5.1.4.1.3`
zhoneLinkAggPartnerGroupId An integer identifier specifying the link group.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.5504.5.1.4.1.4`