ZHONE-ISDN-MIB Table View

The ISDN BRI integrated S/T Interface  Configuration Table.
This table is indexed by IfIndex.It is created by aplication when the system comes up 
with default values.

isdnConfigEntry row .1.3.6.1.4.1.5504.5.7.1.1.1

An entry in the ISDN config table for each S/T Interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
isdnLineTermClass NT Terminal Mode.clas1 and class2 operations are as per CCITT I.430, ETSI ETS 300012, and ANSI T1.605 .These specification mandate two classes of operation for a TE with respect to D channel operation class1 : class1 …	Enumerationr/w Enumerated Values: 1 class1 2 class2	.1.3.6.1.4.1.5504.5.7.1.1.1.1
isdnActivationTimer2 Value of Activation Timer #2. t2-50ms(1): select 50ms for timer #2 t2-100ms(2): select 1000ms for timer #2 The default value is t2-50ms	Enumerationr/w Enumerated Values: 1 t2-50ms 2 t2-100ms	.1.3.6.1.4.1.5504.5.7.1.1.1.2
isdnLineLoopBack loop-back-none(1) :no loop back . loop-back-b1-st-tr(2): transparaent loopback on the S/T interface towards the user(B1 chanel). loop-back-b1-st-nt(3): non-transparent loopback onthe S/T in…	Enumerationr/w Enumerated Values: 1 loop-back-none 2 loop-back-b1-st-tr 3 loop-back-b1-st-nt 4 loop-back-b2-st-tr 5 loop-back-b2-st-nt 6 loop-back-b1-idl2-tr 7 loop-back-b1-idl2-nt 8 loop-back-b2-idl2-tr 9 loop-back-b2-idl2-nt 10 loop-back-2bd-idl2-tr 11 loop-back-2bd-idl2-nt 12 loop-back-2bd-u-interface-tr 13 loop-back-2bd-u-interface-nt 14 loop-back-2bd-external-analog	.1.3.6.1.4.1.5504.5.7.1.1.1.3
isdnLinePower State of the line power. off - no power on line. sealing - minimum current on line to preclude corrosion. powering - full current on line.	Enumerationr/w Enumerated Values: 1 off 2 sealing 3 powering	.1.3.6.1.4.1.5504.5.7.1.1.1.4

The ISDN BRI S/T interface performance table which contains  
the performance data for curent 15 minutes.
It contains information about the status of the ISDN S/T interface, 
including the error statistics.

isdnPerfDataCurrentEntry row .1.3.6.1.4.1.5504.5.7.1.2.1

An entry in current performance table for each ISDN BRI
S/T interface for last 15 minutes.

Indexes

No indexes recorded

Column	Syntax	OID
isdnPerfCurBadAmiViolation Current count of frames with incorrect number of AMI violations.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.5.7.1.2.1.1
isdnPerfCurUnbalancedFrame Current count of unbalanced frames.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.5.7.1.2.1.2
isdnPerCurErrorSeconds Curent ISDN Activation error seconds.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.5.7.1.2.1.3
isdnPerCurFsyncSeconds Currents Frame synch loss seconds .	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.5504.5.7.1.2.1.4
isdnPerfCurTimeElapsed In the current 15 Min period number of seconds elapsed that these counts represent.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.7.1.2.1.5

The ISDN BRI S/T interface performance table, 
it contains statistics and information about
the status of the ISDN S/T interface, 
including the error statistics for previous 15 minutes.

isdnPerfDataPreviousEntry row .1.3.6.1.4.1.5504.5.7.1.3.1

An entry in Previous performance table(for last 15 minutes before
the current performance period) for each S/T interface.

Indexes

No indexes recorded

Column	Syntax	OID
isdnPerfPrevBadAmiViolation count of frames with incorrect number of AMI violations in previous 15 minutes.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.5504.5.7.1.3.1.1
isdnPerfPrevUnbalancedFrame In previous 15 minutes ,count of unbalanced frames.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.5504.5.7.1.3.1.2
isdnPerPrevFsyncSeconds Frame synch error seconds in previous 15 minues.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.5504.5.7.1.3.1.3
isdnPerfPrevErrorSeconds In previous 15 minutes ISDN Activation error seconds	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.5504.5.7.1.3.1.4

The ISDN BRI S/T interface performance table, 
it contains statistics and information about
the status of the ISDN S/T interface, 
including the error statistics for up to the
the last 24 hours.  This is maintained in 15
minute intervals NOT including the current
interval being accumulated. When the current period
reaches 15 minutes, it's counts are rolled into the
previous entry and added to these values. The 97th entry,
previous to the 24 hour period is no longer included in
these counts.

isdnPerfDataTotalEntry row .1.3.6.1.4.1.5504.5.7.1.4.1

An entry in total performance table for each S/T interface.

Indexes

No indexes recorded

Column	Syntax	OID
isdnPerfTotalBadAmiViolation Total count of frames with incorrect number of AMI violations.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.5504.5.7.1.4.1.1
isdnPerfTotalUnbalancedFrame Total count of unbalanced frames.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.5504.5.7.1.4.1.2
isdnPerTotalFsyncSeconds Total Frame synch error seconds.	secondsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.5504.5.7.1.4.1.3
isdnPerfTotalErrorSeconds ISDN Activation error seconds	secondsPerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.5504.5.7.1.4.1.4
isdnPerfTotalTimePeriodsElapsed Number of 15 minute time periods that have been used in the performance total table. This value is normally 96 indicating a valid 24 hour time period except in the cases of a restart of this agent.	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.5504.5.7.1.4.1.5

This table contains information for Alarm conditions.
The table is indexed by IfIndex . The alarm profile will be set 
per port basis usig ifIndex by the application when the system comes up. 
The operator can not create the profile , he can only  change it .

isdnAlarmProfileEntry row .1.3.6.1.4.1.5504.5.7.1.5.1

An entry in AlarmProfile Table.

Indexes

No indexes recorded

Column	Syntax	OID
isdnThresholdAmiViolations Threshold for number of AMI violation . If the number of violations cross this threshold then the notification is sent to NMS. 0 will disable the trap. The default value is 0. There is no range speciffied for this.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.7.1.5.1.1
isdnThresholdUnbalancedFrame Threshold for number of unbalanced frame after which the trap will be send to NMS.0 will disable the trap. The default value is 0. There is no range speciffied for this.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.7.1.5.1.2