ZHONE-COM-VOIP-MIB Table View

This table defines a dialing plan for POTS to SIP originations.
A dialing plan consists of a series of acceptable dial strings
and the corresponding IP addresses to which SIP control messages
(e.g., Invite) are sent to initiate the call.   Each dial string
is represented as digits, wildcards, and regular-expression-like
patterns as the following rules show:
          
 1. A leading '*' or '#' are allowed.
 2. Digits 0-9 are allowed.
 3. A wildcard 'x' represents any digit 0-9
 4. A digit range can be specified using brackets [ ], as follows:
     [135] means a single digit with acceptable values 1,3, or 5.
     [1-4] means a single digit with acceptable values 1,2,3, or 4.
           
          
Examples of valid dial strings:
  911             - literal digit string 911
  #87             - literal digit string #87   
  *6x             - *6 followed by any single digit
  35xxx           - 35 followed by any 3 digits
  77xxx           - 77 followed by any 3 digits
  3[35]xxx        - 33 or 35 followed by any 3 digits
  31[1-3]xxxx     - 311, 312, 313, followed by any 4 digits
          
Notes:
(1) The length of the dial string is limited 1o 128 characters
          
(2) Though the dialplan supports the '#' and '*' keys, the device
may not support any features that use them (e.g., *69).
          
(3) In the case where a collected digit set matches more than one
dial string,  the device will pick the dial string with the most
leading literal digits that match.  For example, given two dial strings:
   35xxx
   3[35]xxx
          
and a collected digit set of 35123,  the first dial plan string is
selected because it contains two leading literal digits that match,
as opposed to the second, which has only one leading literal digit.
          
(4) Variable length dial strings, e.g. 353 followed by any
    number of digits,  are not supported.
          
(5) In the future, a dial string may be configurable such that it
only applies to a subset of the supported ports (e.g., ports with
international calling capabilities might be restricted).   This is
currently not supported; a dial string applies to all subscriberers.
Support will be added for per-port control, most likely by adding
port masks to the dial plan entry.

zhoneVoipSipDialPlanEntry row .1.3.6.1.4.1.5504.4.3.4.3.2.1

An entry in the SIP dial plan table.

Indexes

zhoneVoipSipDialPlanId

Column	Syntax	OID
zhoneVoipSipDialPlanId The unique identifier of the dial plan entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5504.4.3.4.3.2.1.1
zhoneVoipSipDialString A dial string against which collected digits are matched.	OctetStringr/w Constraints: range: 1-128	.1.3.6.1.4.1.5504.4.3.4.3.2.1.2
zhoneVoipSipDialIpAddr Upon detecting a match between the collected digits and the dial string for this table entry, this IP address is used for SIP negotiations to initiate the call.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5504.4.3.4.3.2.1.3
zhoneVoipSipDialPlanRowStatus The row status is used to create or delete an entry in this table.	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.4.3.2.1.4
zhoneVoipSipDialDestName Name of the destination for the dial string	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.5504.4.3.4.3.2.1.5
zhoneVoipSipDialNumOfDigits Number of digits to wait for before initiating the call	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.5504.4.3.4.3.2.1.6
zhoneVoipSipDialPrefixStrip Number of prefix digits to strip from dialled digits	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.5504.4.3.4.3.2.1.7
zhoneVoipSipDialPrefixAdd String to be added to the beginning of the dialled digits before call initiation	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.5504.4.3.4.3.2.1.8
zhoneVoipSipDialPlanType DialPlanType indicates the type of the dial plan. UA has to differenciate between normal dialing and dialing when call features like call park is initiated. The different kinds of dial plan types are: Norma…	Enumerationr/w Enumerated Values: 1 normal 2 callpark 3 esa 4 isdnsig 5 intercom	.1.3.6.1.4.1.5504.4.3.4.3.2.1.9
zhoneVoipServerEntryIndex An index to associated voip-server-entry for this sip-dialplan.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5504.4.3.4.3.2.1.10
zhoneVoipOverrideInterdigitTimeout This parameter overrides the interdigit timeout in voip-system profile. It indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digit…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.4.3.4.3.2.1.11
zhoneVoipSipDialPlanClass This parameter is used to configured the dial plan specific features.	Bitsr/w Enumerated Values: 0 emergency	.1.3.6.1.4.1.5504.4.3.4.3.2.1.12
zhoneVoipSipDialPlanDescription This field gives details about the sip-dialplan	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.5504.4.3.4.3.2.1.13

A hunt groups is defined to map a SIP uniform resource identifier (URI) or 
dirctory number (DN) to multiple DS0s, to allow a greater number of 
incoming calls to that URI/DN.
          
A hunt group consists of the following information:
 - the target DN/URI 
 - the default codec to be used for the call, and
 - the DS0 ports in the hunt-group.
          
Notes:
          
A URI defined in a subscriber-voice-sip profile cannot also be 
defined as part of a hunt group.  This is enforced by the device.
          
A DS0 must be provisioned in the subVoiceSipTable before that DS0 
can be used in a hunt group.  This is enforced by the device.
          
A DS0 may be part of more than one hunt group.

zhoneVoipHuntGroupEntry row .1.3.6.1.4.1.5504.4.3.4.4.3.1

An entry in the hunt group table.

Indexes

zhoneVoipHuntGroupId

Column	Syntax	OID
zhoneVoipHuntGroupId The unique identifier of the hunt group entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5504.4.3.4.4.3.1.1
zhoneVoipHuntGroupDestUri The DN (directory number) or SIP URI (uniform resource identifier) being called. This is the called party from the incoming SIP Invite message.	OctetStringr/w Constraints: range: 1-128	.1.3.6.1.4.1.5504.4.3.4.4.3.1.2
zhoneVoipHuntGroupDefaultCodec The default codec to use for a call to a member of this hunt group.	ZHONE-GEN-SUBSCRIBERZhoneCodecTyper/w Type Values: 1 g711mu 2 g711a 3 g726 4 g729a 5 g723	.1.3.6.1.4.1.5504.4.3.4.4.3.1.3
zhoneVoipHuntGroupPortMembers Indicates which ports are contained in the hunt group.	Bitsr/w Enumerated Values: 0 port1 1 port2 2 port3 3 port4 4 port5 5 port6 6 port7 7 port8 8 port9 9 port10 10 port11 11 port12 12 port13 13 port14 14 port15 15 port16 16 port17 17 port18 18 port19 19 port20 20 port21 21 port22 22 port23 23 port24	.1.3.6.1.4.1.5504.4.3.4.4.3.1.4
zhoneVoipHuntGroupRowStatus The row status is used to create or delete an entry in this table.	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.4.4.3.1.5

This table defines a malicious caller whose call will be rejected if enabled. 
SIP terminal administrator needs to provision URI of this table exactly as it 
appears in the incoming session notification's(SIP INVITE) calling user's 
address-of-record(AOR) formatted as a SIP URI.
The SIP URI can contain either a telephone number(RFC 2806) or an alphanumeric
identification(RFC 2806)
Entries in the table are case sensitive, shall not contain visual separations and 
have the exact length as it appears in the SIP INVITE message

zhoneVoipMaliciousCallerEntry row .1.3.6.1.4.1.5504.4.3.4.5.2.1

An entry in the malicious caller table

Indexes

zhoneVoipMaliciousCallerId

Column	Syntax	OID
zhoneVoipMaliciousCallerId The unique identifier of the malicious call reject entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5504.4.3.4.5.2.1.1
zhoneVoipMaliciousCallerUri Incoming call from this URI will be rejected. The network operator is responsible for provisioning exactly as per appearance in the incoming session notification (SIP INVITE) the calling user's address-of-record (AOR) f…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.5504.4.3.4.5.2.1.2
zhoneVoipMaliciousCallerEnable Indicates whether the incoming call reject is enabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.4.3.4.5.2.1.3
zhoneVoipMaliciousCallerRowStatus The row status is used to create or delete an entry in this table.	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.4.5.2.1.4

Table of VOIP Server addresses applicable to each VOIP
user agent within the system.

zhoneVoipServerEntry row .1.3.6.1.4.1.5504.4.3.4.6.1.1

An entry within the table. Indexed by applIndex, which
is the slot number, and a user specified unique number.

Indexes

NETWORK-SERVICES-MIBapplIndex zhoneVoipServerAddressIndex

Column	Syntax	OID
zhoneVoipServerAddressIndex A unique identifier of a server address when multiple addresses are configured by the MGCP entity. If one address isn't reachable, then another can be tried.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.4.6.1.1.1
zhoneVoipServerRowStatus Row Status is used to create, modify or delete an entry.	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.4.3.4.6.1.1.2
zhoneVoipServerAddrType This object specifies the type of address contained in the associated instance of sipVoipServerAddr.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.5504.4.3.4.6.1.1.3
zhoneVoipServerAddr This object specifies the address of a VOIP server this user agent will use to proxy/redirect calls.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.5504.4.3.4.6.1.1.4
zhoneVoipServerUdpPortNumber Specifies the UDP Port number for the MGCP Gateway. 2427 is the IANA Registered MGCP Gateway port.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5504.4.3.4.6.1.1.5
zhoneVoipServerId Identifies the voip server type.	Enumerationr/w Enumerated Values: 1 longboard 2 asterisk 3 sipexpressrouter 4 metaswitch 5 sylantro 6 broadsoft 7 ubiquity 8 generalbandwidth 9 tekelec-T6000 10 generic 11 sonus 12 siemens 13 tekelec-T9000 14 lucent-telica 15 nortel-cs2000 16 nuera 17 lucent-imerge 18 coppercom 19 newcross 20 cisco-bts 21 cirpack-utp 22 italtel-issw 23 cisco-pgw 24 microtrol-msk10 25 nortel-dms10 26 verso-clarent-c5cm 27 cedarpoint-safari 28 huawei-softx3000 29 nortel-cs1500 30 taqua-t7000 31 utstarcom-mswitch 32 broadsoft-broadworks 33 broadsoft-m6 34 genband-g9 35 netcentrex 36 genband-g6 37 alu-5060 38 ericsson-apz60	.1.3.6.1.4.1.5504.4.3.4.6.1.1.6
zhoneVoipServerProtocol The signalling protocol used for VOIP. Choicees are SIP (Session Initiation Protocol) and MGCP (Media Gateway Control Protocol).	Enumerationr/w Enumerated Values: 1 sip 2 mgcp 3 megaco 4 ncs	.1.3.6.1.4.1.5504.4.3.4.6.1.1.7
zhoneVoipServerSendCallProceedingTone ndicates whether, on call originations destined to the PSTN, the device should play a call proceeding tone while waiting for ring-back tone from the switch.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.4.3.4.6.1.1.8
zhoneVoipServerRtcpEnabled Indicates whether the Real-Time Control Protocol is enabled for the device.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.4.3.4.6.1.1.9
zhoneVoipServerRtcpPacketInterval RTCP packet interval, in milleseconds. Range is 2500 to 10000 ms. This object's value is only pertinent if RTCP has been enabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.4.3.4.6.1.1.10
zhoneVoipServerInterDigitTimeout This parameter indicates the duration, in seconds, that the device will wait after each digit is entered before assuming the user has finished entering digits.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.4.3.4.6.1.1.11
zhoneVoipServerIpTos This parameter indicates the tos value that is set in the ip header for voice of ip traffic.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.4.3.4.6.1.1.12
zhoneVoipServerDomainName This parameter indicates the Universal Resource Identifier (URI) of the system.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.5504.4.3.4.6.1.1.13
zhoneVoipServerExpiresInvite For user agent clients, this value is inserted into the Expires header. For proxy servers, if a received request contained an Expires header, then the value in the header takes precedence.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.4.6.1.1.14
zhoneVoipServerExpiresRegister For user agent clients, this value is inserted into the Expires header. For registrar servers, if a received request contained an Expires header, then the value in the header takes precedence.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.4.6.1.1.15
zhoneVoipServerHeaderMethod This convention is a bit map. Each bit represents a SIP method where the Expires header should be included. If a bit has value 1, then the requests corresponding to that SIP method must include an Expires header l…	Bitsr/w Enumerated Values: 0 invite 1 register	.1.3.6.1.4.1.5504.4.3.4.6.1.1.16
zhoneVoipServerSessionTimer Support session timers on : Session timers are supported, and SIP messages will have a 'Supported: timer' header off: Session timers are NOT supported, and SIP messages will NOT have a 'Support…	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.5504.4.3.4.6.1.1.17
zhoneVoipServerSessionExpiration The time at which an element (proxy, UAC, UAS) will consider the SIP session timed out, if no successful session refresh transaction occurs beforehand.	secondsUnsigned32r/w Constraints: range: 90-2147483647	.1.3.6.1.4.1.5504.4.3.4.6.1.1.18
zhoneVoipServerSessionMinSE Because of the processing load of mid-dialog requests, all elements (proxy, UAC, UAS) can have configured minimum value for the session interval that they are willing to accept.	secondsUnsigned32r/w Constraints: range: 90-2147483647	.1.3.6.1.4.1.5504.4.3.4.6.1.1.19
zhoneVoipServerSessionCallerReqTimer This field specifies the caller's action yes: Caller (UAC) will request for timer when making outbound calls no : Caller (UAC) will NOT request for timer when making outbound calls	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.5504.4.3.4.6.1.1.20
zhoneVoipServerSessionCalleeReqTimer When caller supports timer but did not request one this field specifies the callee's action yes: Callee (UAS) will request for timer no : Callee (UAS) will NOT request for timer	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.5504.4.3.4.6.1.1.21
zhoneVoipServerSessionCallerSpecifyRefresher Caller specifies the refresher: UAC : Caller specifies itself (UAC) as the refresher UAS : Caller specifies the callee (UAS) as the refresher Omit: Caller does NOT explicitly specify the refresher	Enumerationr/w Enumerated Values: 1 uac 2 uas 3 omit	.1.3.6.1.4.1.5504.4.3.4.6.1.1.22
zhoneVoipServerSessionCalleeSpecifyRefresher When UAC did not specify refresher tag, callee specifies the refresher: UAC : Callee specifies the caller (UAC) as the refresher UAS : Callee specifies itself (UAS) as the refresher	Enumerationr/w Enumerated Values: 1 uac 2 uas	.1.3.6.1.4.1.5504.4.3.4.6.1.1.23
zhoneVoipServerDtmfMode Indicates whether dtmf digits are to be passed as codec voice packets or special separate packets (rfc2833).	Enumerationr/w Enumerated Values: 1 inband 2 rfc2833 3 rfc2833only	.1.3.6.1.4.1.5504.4.3.4.6.1.1.24
zhoneVoipServerBehaviorStringOne This field is used to control any switch specific behavior of the VOIP Gateway.	charactersOctetString Constraints: range: 0-512	.1.3.6.1.4.1.5504.4.3.4.6.1.1.25
zhoneVoipServerRtpTermIdSyntax This field describes the Ephemeral term ID syntax for the switch. The RTP syntax varies from switch to switch.But the string should contain atleast one %eid format, eg <string>%eid<string> . This field is supported onl…	charactersOctetStringr/w Constraints: range: 0-96	.1.3.6.1.4.1.5504.4.3.4.6.1.1.26
zhoneVoipServerRtpDSCP This parameter indicates DSCP value for voip's rtp traffic. NOTE:zhoneVoipServerIpTos field must be zero before entering a new value into this field. Valid code values: <0-6…	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.5504.4.3.4.6.1.1.27
zhoneVoipServerSignalingDSCP This parameter indicates DSCP value for voip's signaling traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) a…	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.5504.4.3.4.6.1.1.28
zhoneVoipServerDtmfPayloadId Description.	Integer32r/w Constraints: range: 96-127	.1.3.6.1.4.1.5504.4.3.4.6.1.1.29
zhoneVoipServerRegisterReadyTimeout For Megaco Service change Messages this value will be used in service-change-delay.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.4.6.1.1.30
zhoneVoipServerMessageRetryCount This field specifies the number of retries of SIP message to every DNS resolved server IP addresses. The default behaviour means that the SIP message will be retransmitted to the first DNS resolved IP address once and…	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.5504.4.3.4.6.1.1.31
zhoneVoipServerFeatures Set of features can be enabled for voip server Bit Feature --- -------- 1 sip outbound 2 gruu	Bitsr/w Enumerated Values: 0 sip-outbound 1 gruu	.1.3.6.1.4.1.5504.4.3.4.6.1.1.32
zhoneVoipServerTransportProtocol This field specifies type of transport protocol configured. Possible values are udp and tcp.	Enumerationr/w Enumerated Values: 1 udp 2 tcp	.1.3.6.1.4.1.5504.4.3.4.6.1.1.33
zhoneVoipSigLocalPortNumber This field specifies signalling local port number, used when tcp is configured as tranport protocol.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5504.4.3.4.6.1.1.34