XKL-MIB Table View

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.3.1.1

xklTransportStatus

Interface laser status.

Enumeration

Enumerated Values:

1	other
2	notPresent
3	up
7	notReady
8	fault
9	disabled
10	down
11	alarm
12	warning
13	ioError
14	lowPower

.1.3.6.1.4.1.21150.1.1.3.1.2

xklTransportDescr

Interface description.

xklTransportEncapsulation

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.3.1.3

xklTransportType

Interface module type.

Enumeration

Enumerated Values:

1	other
2	sfp
3	xfp
4	sfpplus
5	cxp
6	cfp
7	dwdmsfp
8	dwdmxfp
9	dwdmsfpplus
10	dwdmcfp
11	dwdmoif
12	qsfpplus
13	qsfp28
14	qsfpdd
15	osfp

.1.3.6.1.4.1.21150.1.1.3.1.4

Interface encapsulation.

Enumeration

Enumerated Values:

1	other
2	fastethernet
3	fddi
4	gigabitethernet
5	sonetOC3
6	sonetSTM1
7	sonetOC12
8	sonetSTM4
9	sonetOC48
10	sonetSTM16
11	fibrechannel1x
12	fibrechannel2x
13	fibrechannel4x
14	copper10megabitethernet
15	copperfastethernet
16	coppergigabitethernet
17	prbs
32	tengigabitethernet
33	sonetOC192
34	sonetOC192FEC
35	fibreChannel10x
36	tengigabitethernetFEC
37	fibreChannel8x
38	onexCAUI4
39	twoxCAUI4
40	threex100GAUI2
41	fourx100GAUI2ZR
42	fourx100GAUI2
43	fourhundredGAUI8ZR
44	fourhundredGAUI8
45	onehundredBaseFX
46	twox100GAUI2
47	onex100GAUI2
48	fourx100GAUI1
49	fourx100GAUI1S
50	fourx100GAUI1L
51	sixx100GAUI1
52	sixx100GAUI1S
53	sixx100GAUI1L
54	eightx100GAUI1
55	eightx100GAUI1S
56	eightx100GAUI1L
57	twox200GAUI2
58	twox200GAUI2S
59	twox200GAUI2L
60	threex200GAUI2
61	threex200GAUI2S
62	threex200GAUI2L
63	fourx200GAUI2
64	fourx200GAUI2S
65	fourx200GAUI2L
66	twox200GAUI4
67	onex400GAUI4
68	onex400GAUI4S
69	onex400GAUI4L
70	twox400GAUI4
71	twox400GAUI4S
72	twox400GAUI4L
73	eighthundredGAUI8
74	eighthundredGAUI8S
75	eighthundredGAUI8L

.1.3.6.1.4.1.21150.1.1.3.1.5

xklTransportSerialNumber

Interface module serial number.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.3.1.6

xklTransportCritErrdeprecated

Interface critical error count since last counter reset.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.7

xklTransportWarndeprecated

Interface warning count since last counter reset.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.8

xklTransportLaserStat

Interface laser status.

Enumeration

Enumerated Values:

1	other
2	active
3	disabled
4	testing

.1.3.6.1.4.1.21150.1.1.3.1.9

xklTransportTemp

Interface laser temperature (Celsius).

xklTransportTransmitPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.10

Interface laser transmit power (1/10 dBm).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.11

xklTransportReceivePower

Interface laser receive power (1/10 dBm).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.12

xklTransportClockFreqdeprecated

Interface clock frequency (kHz).

kHzSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.3.1.13

xklTransportAccumErrSecs

Interface error state accumulated seconds.

secondsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.14

xklTransportLaserBias

Interface laser bias (uA).

uASNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.15

xklTransportChanneldeprecated

Interface channel number (ITU-T channel number or 0 if not applicable).

xklTransportTempHiAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.16

Interface high temperature alarm threshold (Celsius).

xklTransportTempLoAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.17

Interface low temperature alarm threshold (Celsius).

xklTransportTempHiWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.18

Interface high temperature warning threshold (Celsius).

xklTransportTempLoWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.19

Interface low temperature warning threshold (Celsius).

xklTransportBiasHiAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.20

Interface high bias alarm threshold (mA).

xklTransportBiasLoAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.21

Interface low bias alarm threshold (mA).

xklTransportBiasHiWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.22

Interface high bias warning threshold (mA).

xklTransportBiasLoWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.23

Interface low bias warning threshold (mA).

xklTransportTxPowerHiAlrmThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.24

Interface high transmit power alarm threshold (1/10 dBm).

xklTransportTxPowerLoAlrmThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.25

Interface low transmit power alarm threshold (1/10 dBm).

xklTransportTxPowerHiWarnThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.26

Interface high transmit power warning threshold (1/10 dBm).

xklTransportTxPowerLoWarnThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.27

Interface low transmit power warning threshold (1/10 dBm).

xklTransportRxPowerHiAlrmThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.28

Interface high receive power alarm threshold (1/10 dBm).

xklTransportRxPowerLoAlrmThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.29

Interface low receive power alarm threshold (1/10 dBm).

xklTransportRxPowerHiWarnThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.30

Interface high receive power warning threshold (1/10 dBm).

xklTransportRxPowerLoWarnThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.31

Interface low receive power warning threshold (1/10 dBm).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.32

xklTransportAUX1

Interface AUX1 value.

xklTransportAUX1HiAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.33

Interface high AUX1 alarm threshold.

xklTransportAUX1LoAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.34

Interface low AUX1 alarm threshold.

xklTransportAUX1HiWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.35

Interface high AUX1 warning threshold.

xklTransportAUX1LoWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.36

Interface low AUX1 warning threshold.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.37

xklTransportAUX2

Interface AUX2 value.

xklTransportAUX2HiAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.38

Interface high AUX2 alarm threshold.

xklTransportAUX2LoAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.39

Interface low AUX2 alarm threshold.

xklTransportAUX2HiWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.40

Interface high AUX2 warning threshold.

xklTransportAUX2LoWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.41

Interface low AUX2 warning threshld.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.42

xklTransportVoltage

Interface applied voltage (1/10 mV).

xklTransportVoltageHiAlrmThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.43

Interface high voltage alarm threshold (1/10 mV).

xklTransportVoltageLoAlrmThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.44

Interface low voltage alarm threshold (1/10 mV).

xklTransportVoltageHiWarnThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.45

Interface high voltage warning threshold (1/10 mV).

xklTransportVoltageLoWarnThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.46

Interface low voltage warning threshold (1/10 mV).

xklTransportChannelOffset

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.47

xklTransportTxStatus

Interface transmitter status.

Enumeration

Enumerated Values:

1	other
2	absent
3	fault
4	alarm
5	warning
6	disabled
7	lol
8	up

.1.3.6.1.4.1.21150.1.1.3.1.48

xklTransportRxStatus

Interface receiver status.

Enumeration

Enumerated Values:

1	other
2	absent
3	alarm
4	warning
5	los
6	lol
7	up

.1.3.6.1.4.1.21150.1.1.3.1.49

Interface ITU-T DWDM channel center offset.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.50

xklTransportChannelWidth

Interface ITU-T DWDM channel width.

xklTransportMaxChannelOffset

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.51

Interface ITU-T DWDM maximum channel center offset.

xklTransportMaxChannelWidth

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.52

Interface ITU-T DWDM maximum channel width.

xklTransportMinChannelOffset

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.53

Interface ITU-T DWDM minimum channel center offset.

xklTransportMinChannelWidth

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.54

Interface ITU-T DWDM minimum channel width.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.55

xklTransportVendorName

Interface vendor name.

xklTransportVendorPartNumber

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.3.1.56

Interface vendor part number.

xklTransportVendorDateCode

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.3.1.57

Interface vendor manufacturing date code.

xklTransportVendorRevisionNumber

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.3.1.58

Interface vendor revision number.

xklTransportVendorLotCode

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.3.1.59

Interface vendor lot code.

xklTransportElectricalLoopback

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.3.1.60

xklTransportVendorOUI

Interface vendor OUI.

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.21150.1.1.3.1.61

Interface electrical loopback status.

Enumeration

Enumerated Values:

1	other
2	unavailable
3	disabled
4	enabled

.1.3.6.1.4.1.21150.1.1.3.1.62

xklTransportOpticalLoopback

Interface optical loopback status.

Enumeration

Enumerated Values:

1	other
2	unavailable
3	disabled
4	enabled

.1.3.6.1.4.1.21150.1.1.3.1.63

xklTransportFramedLoopback

Interface framed loopback status.

Enumeration

Enumerated Values:

1	other
2	unavailable
3	disabled
4	enabled

.1.3.6.1.4.1.21150.1.1.3.1.64

xklTransportUnframedLoopback

Interface unframed loopback status.

Enumeration

Enumerated Values:

1	other
2	unavailable
3	disabled
4	enabled

.1.3.6.1.4.1.21150.1.1.3.1.65

xklTransportFramedElectricalLoopback

Interface framed electrical loopback status.

Enumeration

Enumerated Values:

1	other
2	unavailable
3	disabled
4	enabled

.1.3.6.1.4.1.21150.1.1.3.1.66

xklTransportUnframedElectricalLoopback

Interface unframed electrical loopback status.

Enumeration

Enumerated Values:

1	other
2	unavailable
3	disabled
4	enabled

.1.3.6.1.4.1.21150.1.1.3.1.67

xklTransportLinkUpDownTrapEnable

Indicates whether linkUp/linkDown traps
should be generated for this transport interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.21150.1.1.3.1.68

xklTransportTemp1

Interface laser temperature 1 (Celsius).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.69

xklTransportTemp2

Interface laser temperature 2 (Celsius).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.70

xklTransportTemp3

Interface laser temperature 3 (Celsius).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.71

xklTransportTemp4

Interface laser temperature 4 (Celsius).

xklTransportTemp1HiAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.72

Interface high temperature 1 alarm threshold (Celsius).

xklTransportTemp2HiAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.73

Interface high temperature 2 alarm threshold (Celsius).

xklTransportTemp3HiAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.74

Interface high temperature 3 alarm threshold (Celsius).

xklTransportTemp4HiAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.75

Interface high temperature 4 alarm threshold (Celsius).

xklTransportTemp1LoAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.76

Interface low temperature 1 alarm threshold (Celsius).

xklTransportTemp2LoAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.77

Interface low temperature 2 alarm threshold (Celsius).

xklTransportTemp3LoAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.78

Interface low temperature 3 alarm threshold (Celsius).

xklTransportTemp4LoAlrmThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.79

Interface low temperature 4 alarm threshold (Celsius).

xklTransportTemp1HiWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.80

Interface high temperature 1 warning threshold (Celsius).

xklTransportTemp2HiWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.81

Interface high temperature 2 warning threshold (Celsius).

xklTransportTemp3HiWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.82

Interface high temperature 3 warning threshold (Celsius).

xklTransportTemp4HiWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.83

Interface high temperature 4 warning threshold (Celsius).

xklTransportTemp1LoWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.84

Interface low temperature 1 warning threshold (Celsius).

xklTransportTemp2LoWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.85

Interface low temperature 2 warning threshold (Celsius).

xklTransportTemp3LoWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.86

Interface low temperature 3 warning threshold (Celsius).

xklTransportTemp4LoWarnThreshold

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.87

Interface low temperature 4 warning threshold (Celsius).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.3.1.88

xklFanControllerTable

table

.1.3.6.1.4.1.21150.1.1.5 · 1 row entry · 3 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklFanControllerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklFanControllerTable'

Fan module table.

xklFanControllerEntry row .1.3.6.1.4.1.21150.1.1.5.1

Fan module entry.

Indexes

xklFanControllerIndex

Column Syntax OID

xklFanControllerIndex

Fan module table index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.5.1.1

xklFanControllerStatus

Fan module status.

Enumeration

Enumerated Values:

1	other
2	normal
3	offline
4	error
5	cmdReady
6	alarm
7	timerOverflow
8	absent
9	communicationError

.1.3.6.1.4.1.21150.1.1.5.1.2

xklFanControllerDescr

Fan module description.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.5.1.3

xklFanUnitTable

table

.1.3.6.1.4.1.21150.1.1.7 · 1 row entry · 9 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklFanUnitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklFanUnitTable'

Blower table.

xklFanUnitEntry row .1.3.6.1.4.1.21150.1.1.7.1

Blower table entry.

Indexes

xklFanUnitIndex

Column Syntax OID

xklFanUnitIndex

Blower table index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.7.1.1

xklFanUnitController

Blower fan module index.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.7.1.2

xklFanUnitStatus

Blower status.

Enumeration

Enumerated Values:

1	other
2	normal
3	off
4	notPresent
5	alarm
6	cmdReady
7	override
8	testMode

.1.3.6.1.4.1.21150.1.1.7.1.3

xklFanUnitRequestedStep

Blower incremental step setting (0-255).

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.21150.1.1.7.1.4

xklFanUnitSpeedActual

Blower actual speed (RPS).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.7.1.5

xklFanUnitAlarm

Blower alarm status.

Enumeration

Enumerated Values:

1	other
2	ok
3	fanFailure
4	fanOff
5	commandReject
6	underSpeed
7	overSpeed

.1.3.6.1.4.1.21150.1.1.7.1.6

xklFanUnitMinSpeed

Blower minimum speed (RPS).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.7.1.7

xklFanUnitMaxSpeed

Blower maximum speed (RPS).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.7.1.8

xklFanUnitDescr

Blower description.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.7.1.9

xklPowerTable

table

.1.3.6.1.4.1.21150.1.1.9 · 1 row entry · 13 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklPowerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklPowerTable'

Power supply table.

xklPowerEntry row .1.3.6.1.4.1.21150.1.1.9.1

Power supply table entry.

Indexes

xklPowerIndex

Column Syntax OID

xklPowerIndex

Power supply table index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.9.1.1

xklPowerStatus

Power supply status.

Enumeration

Enumerated Values:

1	other
2	normal
3	offline
4	nopower
5	absent
6	overtemp
7	dcfault
8	fanslow
9	alert

.1.3.6.1.4.1.21150.1.1.9.1.2

xklPowerSerialNumber

Power supply serial number.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.3

xklPowerVoltage

Power supply voltage (mV or 0 if not reportable).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.9.1.4

xklPowerCurrent

Power supply current (mA or 0 if not reportable).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.9.1.5

xklPowerDescr

Power supply description.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.6

xklPowerCRPSStatusWord

CRPS power supply status word decoded (empty string if not reportable or not present).

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.7

xklPowerCRPSStatusVout

CRPS power supply Vout status byte decoded (empty string if not reportable or not present).

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.8

xklPowerCRPSStatusIout

CRPS power supply Iout status byte decoded (empty string if not reportable or not present).

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.9

xklPowerCRPSStatusInput

CRPS power supply input status byte decoded (empty string if not reportable or not present).

xklPowerCRPSStatusTemperature

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.10

CRPS power supply temperature status byte decoded (empty string if not reportable or not present).

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.11

xklPowerCRPSStatusCML

CRPS power supply CML status byte decoded (empty string if not reportable or not present).

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.12

xklPowerCRPSStatusFans12

CRPS power supply fans 1 and 2 status byte decoded (empty string if not reportable or not present).

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.9.1.13

xklSwitchConnTable

table

.1.3.6.1.4.1.21150.1.1.11 · 1 row entry · 5 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklSwitchConnTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklSwitchConnTable'

Switch connection table.

xklSwitchConnEntry row .1.3.6.1.4.1.21150.1.1.11.1

Switch connection table entry.

Indexes

xklSwitchConnIndex

Column Syntax OID

xklSwitchConnIndex

Switch connection table index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.11.1.1

xklSwitchConnStatus

Switch connection status.

Enumeration

Enumerated Values:

1	other
2	connected
3	disconnected

.1.3.6.1.4.1.21150.1.1.11.1.2

xklSwitchConnInterfaceA

Connected interface A index.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.11.1.3

xklSwitchConnInterfaceB

Connected interface B index.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.11.1.4

xklSwitchConnChanneldeprecated

Connected DWDM channel.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.11.1.5

xklEDFATable

table

.1.3.6.1.4.1.21150.1.1.17 · 1 row entry · 34 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklEDFATable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklEDFATable'

EDFA amplifier table.

xklEDFAEntry row .1.3.6.1.4.1.21150.1.1.17.1

EDFA amplifier table entry.

Indexes

xklEDFAIndex

Column Syntax OID

xklEDFAIndex

EDFA amplifier table index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.17.1.1

xklEDFALabel

EDFA amplifier display label.

xklEDFACaseTemperatureAlarm

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.2

xklEDFAIsPresent

EDFA amplifier slot is populated property.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.17.1.3

xklEDFAInReset

EDFA amplifier is in reset property.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.17.1.4

xklEDFADisabled

EDFA amplifier is disabled property.

Enumeration

Enumerated Values:

1	unused
2	disabled
3	enabled

.1.3.6.1.4.1.21150.1.1.17.1.5

xklEDFAMuted

EDFA amplifier is muted property.

Enumeration

Enumerated Values:

1	unused
2	muted
3	no

.1.3.6.1.4.1.21150.1.1.17.1.6

EDFA amplifier case temperature alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.17.1.7

xklEDFACommonAlarm

EDFA amplifier common alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.17.1.8

xklEDFAPumpTemperatureAlarm

EDFA amplifier pump temperature alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.17.1.9

xklEDFAPumpBiasAlarm

EDFA amplifier pump bias alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.17.1.10

xklEDFALossOfInputAlarm

EDFA amplifier loss of input alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.17.1.11

xklEDFALossOfOutputAlarm

EDFA amplifier loss of output alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.17.1.12

xklEDFAManufacturer

EDFA amplifier manufacturer.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.13

xklEDFAModuleType

EDFA amplifier module type / part number.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.14

xklEDFASerialNum

EDFA amplifier serial number.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.15

xklEDFAManufactureDate

EDFA amplifier date of manufacture.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.16

xklEDFALastResetTime

EDFA amplifier time of last reset.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.17

xklEDFALastServiceTimedeprecated

EDFA amplifier time of last service.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.18

xklEDFAControlType

EDFA amplifier control type.

Enumeration

Enumerated Values:

-1	none
0	manualPumpPower
1	manualPumpCurrent
2	automaticGainControl
3	automaticPowerControl
4	automaticMaximumPumpPower
5	automaticOutputControl
6	automaticPumpCurrent
7	fence
8	disabled

.1.3.6.1.4.1.21150.1.1.17.1.19

xklEDFAControlSetPoint

EDFA amplifier control set point.

xklEDFAControlSetPointUnits

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.17.1.20

EDFA amplifier control set point units.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.21

xklEDFAMode

EDFA amplifier operating mode.

Enumeration

Enumerated Values:

-1	none
0	booster
1	preamp

.1.3.6.1.4.1.21150.1.1.17.1.22

xklEDFAModuleAlarms

EDFA amplifier active alarms.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.23

xklEDFAInputOpticalPower

EDFA amplifier input optical power (1/10 dBm).

xklEDFAOutputOpticalPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.17.1.24

EDFA amplifier output optical power (1/10 dBm).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.17.1.25

xklEDFACaseTemp

EDFA amplifier case temperature (1/10 Celsius).

1/10 CelsiusSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.17.1.26

xklEDFAPumpLaserStatus

EDFA amplifier pump laser status.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.21150.1.1.17.1.27

xklEDFAPumpLaserTemp

EDFA amplifier pump laser temperature (1/10 Celsius).

1/10 CelsiusSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.17.1.28

xklEDFAPumpLaserCurrent

EDFA amplifier pump laser current (1/10 mA).

1/10 mASNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.17.1.29

xklEDFAPumpLaserPower

EDFA amplifier pump laser power (1/10 dBm).

xklEDFAAmplificationState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.17.1.30

EDFA amplifier status.

Enumeration

Enumerated Values:

0	down
1	up
2	unused
3	los
4	warning
5	alarm
6	reset
7	unknown

.1.3.6.1.4.1.21150.1.1.17.1.31

xklEDFAName

EDFA amplifier name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.32

xklEDFAGroupNumber

EDFA amplifier's group number.

XklDUAGroupNumberEnum

Type Values:

-1	none
0	group0
1	group1
2	group2
3	group3

Description:

Represents a DUA group value.

.1.3.6.1.4.1.21150.1.1.17.1.33

xklEDFAGroupName

EDFA amplifier's group name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.17.1.34

xklRamanTable

table

.1.3.6.1.4.1.21150.1.1.19 · 1 row entry · 37 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklRamanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklRamanTable'

Raman amplifier table.

xklRamanEntry row .1.3.6.1.4.1.21150.1.1.19.1

Raman amplifier table entry.

Indexes

xklRamanIndex

Column Syntax OID

xklRamanIndex

Raman amplifier table index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.19.1.1

xklRamanLabel

Raman amplifier display label.

xklRamanCaseTemperatureAlarm

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.2

xklRamanIsPresent

Raman amplifier slot is populated property.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.19.1.3

xklRamanInReset

Raman amplifier is in reset property.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.19.1.4

xklRamanDisabled

Raman amplifier status.

Enumeration

Enumerated Values:

1	unused
2	disabled
3	enabled

.1.3.6.1.4.1.21150.1.1.19.1.5

xklRamanMuted

Raman amplifier is muted property.

Enumeration

Enumerated Values:

1	unused
2	muted
3	no

.1.3.6.1.4.1.21150.1.1.19.1.6

Raman amplifier case temperature alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.19.1.7

xklRamanCommonAlarm

Raman amplifier common alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.19.1.8

xklRamanPumpTemperatureAlarm

Raman amplifier pump temperature alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.19.1.9

xklRamanPumpBiasAlarm

Raman amplifier pump bias alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.19.1.10

xklRamanLossOfInputAlarm

Raman amplifier loss of input alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.19.1.11

xklRamanLossOfOutputAlarm

Raman amplifier loss of output alarm.

Enumeration

Enumerated Values:

1	unused
2	yes
3	no

.1.3.6.1.4.1.21150.1.1.19.1.12

xklRamanManufacturer

Raman amplifier manufacturer.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.13

xklRamanModuleType

Raman amplifier module type/part number.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.14

xklRamanSerialNum

Raman amplifier serial number.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.15

xklRamanManufactureDate

Raman amplifier date of manufacture.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.16

xklRamanLastResetTime

Raman amplifier time of last reset.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.17

xklRamanLastServiceTimedeprecated

Raman amplifier time of last service.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.18

xklRamanControlType

Raman amplifier control type.

Enumeration

Enumerated Values:

-1	none
0	manualPumpPower
1	manualPumpCurrent
2	automaticGainControl
3	automaticPowerControl
4	automaticMaximumPumpPower
5	automaticOutputControl
6	automaticPumpCurrent
7	fence
8	disabled

.1.3.6.1.4.1.21150.1.1.19.1.19

xklRamanControlSetPoint

Raman amplifier control set point.

xklRamanControlSetPointUnits

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.20

Raman amplifier control set point units.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.21

xklRamanMode

Raman amplifier operating mode.

Enumeration

Enumerated Values:

-1	none
0	booster
1	preamp

.1.3.6.1.4.1.21150.1.1.19.1.22

xklRamanModuleAlarms

Raman amplifier active alarms.

xklRamanInputOpticalPower

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.23

Raman amplifier input optical power (1/10 dBm).

xklRamanOutputOpticalPower

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.24

Raman amplifier output optical power (1/10 mW).

1/10 mWSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.25

xklRamanCaseTemp

Raman amplifier case temperature (1/10 Celsius).

1/10 CelsiusSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.26

xklRamanPump1LaserStatus

Raman amplifier pump 1 laser status.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.21150.1.1.19.1.27

xklRamanPump1LaserTemp

Raman amplifier pump 1 laser temperature (1/10 Celsius).

1/10 CelsiusSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.28

xklRamanPump1LaserCurrent

Raman amplifier pump 1 laser current (1/10 mA).

1/10 mASNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.29

xklRamanPump2LaserStatus

Raman amplifier pump 2 laser status.

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.21150.1.1.19.1.30

xklRamanPump2LaserTemp

Raman amplifier pump 2 laser temperature (1/10 Celsius).

1/10 CelsiusSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.31

xklRamanPump2LaserCurrent

Raman amplifier pump laser current (1/10 mA).

1/10 mASNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.32

xklRamanCompositePumpsLaserPower

Raman amplifier composite pumps laser power (1/10 mW).

1/10 mWSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.33

xklRamanFiberType

Raman amplifier fiber type.

Enumeration

Enumerated Values:

0	none
1	smf
2	leaf
3	truewave
4	g654
5	teralight
6	g653
7	g652
8	g655

.1.3.6.1.4.1.21150.1.1.19.1.34

xklRamanAmplificationState

Raman amplifier status.

Enumeration

Enumerated Values:

0	down
1	up
2	unused
3	los
4	warning
5	alarm
6	reset
7	unknown

.1.3.6.1.4.1.21150.1.1.19.1.35

xklRamanBackReflection

Raman amplifier back reflection ratio (1/10 dB).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.19.1.36

xklRamanName

Raman amplifier name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.19.1.37

xklOTMTable

table deprecated

.1.3.6.1.4.1.21150.1.1.21 · 1 row entry · 3 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklOTMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklOTMTable'

XKL OTM info.

xklOTMEntry row .1.3.6.1.4.1.21150.1.1.21.1

XKL OTM info.

Indexes

xklOTMIndex

Column Syntax OID

xklOTMIndexdeprecated

Index to this OTM.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.21.1.1

xklOTMStatusdeprecated

Status for this OTM.

Enumeration

Enumerated Values:

1	down
2	up
3	unused

.1.3.6.1.4.1.21150.1.1.21.1.2

xklOTMDescrdeprecated

OTM Description.

xklTransceiverModuleIndex

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.21.1.3

xklTransceiverModuleTable

table

.1.3.6.1.4.1.21150.1.1.23 · 1 row entry · 28 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklTransceiverModuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklTransceiverModuleTable'

Transceiver Module table.

xklTransceiverModuleEntry row .1.3.6.1.4.1.21150.1.1.23.1

Transceiver Module table entry.

Indexes

Column Syntax OID

xklTransceiverModuleIndex

Transceiver Module table index.

xklTransceiverModuleStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.23.1.1

Transceiver Module status.

Enumeration

Enumerated Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

.1.3.6.1.4.1.21150.1.1.23.1.2

xklTransceiverModuleDescr

Transceiver Module description.

xklTransceiverModuleNumberOfDataLanes

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.23.1.3

xklTransceiverModuleType

Transceiver Module type.

Enumeration

Enumerated Values:

1	other
2	sfp
3	xfp
4	sfpplus
5	cxp
6	cfp
7	dwdmsfp
8	dwdmxfp
9	dwdmsfpplus
10	dwdmcfp
11	dwdmoif
12	qsfpplus
13	qsfp28
14	qsfpdd
15	osfp

.1.3.6.1.4.1.21150.1.1.23.1.4

Number of data lanes actually used on Transceiver Module.

xklTransceiverModuleMaxNumOfSupportedDataLanes

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.23.1.5

Maximum Number of data lanes supported on Transceiver Module.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.23.1.6

xklTransceiverModuleOSNR

Rx Optical Signal Noise Ratio (OSNR).

xklTransceiverModuleRxBits

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.23.1.7

Rx Bits.

xklTransceiverModuleRxCorrectedBits

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.8

Rx Corrected Bits.

xklTransceiverModuleRxFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.9

Rx Frames.

xklTransceiverModuleRxFrameUncorrectedErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.10

Rx Frame Uncorrected Errors.

xklTransceiverModuleTxBitsGroup0

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.11

Tx Bits Group 0.

xklTransceiverModuleTxCorrectedBitsGroup0

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.12

Tx Corrected Bits Group 0.

xklTransceiverModuleTxFramesGroup0

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.13

Tx Frames Group 0.

xklTransceiverModuleTxFrameUncorrectedErrorsGroup0

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.14

Tx Frame Uncorrected Errors Group 0.

xklTransceiverModuleTxBitsGroup1

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.15

Tx Bits Group 1.

xklTransceiverModuleTxCorrectedBitsGroup1

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.16

Tx Corrected Bits Group 1.

xklTransceiverModuleTxFramesGroup1

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.17

Tx Frames Group 1.

xklTransceiverModuleTxFrameUncorrectedErrorsGroup1

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.18

Tx Frame Uncorrected Errors Group 1.

xklTransceiverModuleTxBitsGroup2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.19

Tx Bits Group 2.

xklTransceiverModuleTxCorrectedBitsGroup2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.20

Tx Corrected Bits Group 2.

xklTransceiverModuleTxFramesGroup2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.21

Tx Frames Group 2.

xklTransceiverModuleTxFrameUncorrectedErrorsGroup2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.22

Tx Frame Uncorrected Errors Group 2.

xklTransceiverModuleTxBitsGroup3

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.23

Tx Bits Group 3.

xklTransceiverModuleTxCorrectedBitsGroup3

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.24

Tx Corrected Bits Group 3.

xklTransceiverModuleTxFramesGroup3

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.25

Tx Frames Group 3.

xklTransceiverModuleTxFrameUncorrectedErrorsGroup3

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.26

Tx Frame Uncorrected Errors Group 3.

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.23.1.27

xklTransceiverModuleESNR

Rx Media electrical Signal Noise Ratio (eSNR)

xklOTDRLatestMeasurementOSCIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.23.1.28

xklOTDRLatestMeasurementTable

table

.1.3.6.1.4.1.21150.1.1.25 · 1 row entry · 6 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklOTDRLatestMeasurementTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklOTDRLatestMeasurementTable'

OTDR Latest Measurement table.

xklOTDRLatestMeasurementEntry row .1.3.6.1.4.1.21150.1.1.25.1

OTDR Latest Measurement table entry.

Indexes

Column Syntax OID

xklOTDRLatestMeasurementOSCIndex

OTDR/OSC index.

xklOTDRLatestMeasurementOSCDescr

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.25.1.1

OTDR/OSC description.

xklOTDRLatestMeasurementResults

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.25.1.2

OTDR latest measurement results.

xklOTDRLatestMeasurementDateTime

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.25.1.3

OTDR latest measurement date and time.

xklOTDRLatestMeasurementOTDRGroupNumber

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.25.1.4

OTDR's group number.

XklDUAGroupNumberEnum

Type Values:

-1	none
0	group0
1	group1
2	group2
3	group3

Description:

Represents a DUA group value.

.1.3.6.1.4.1.21150.1.1.25.1.5

xklOTDRLatestMeasurementOTDRGroupName

OTDR's group name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.25.1.6

xklDUAGroupTable

table

.1.3.6.1.4.1.21150.1.1.27 · 1 row entry · 3 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklDUAGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklDUAGroupTable'

DUA group table.

xklDUAGroupEntry row .1.3.6.1.4.1.21150.1.1.27.1

DUA group table entry.

Indexes

xklDUAGroupIndex

Column Syntax OID

xklDUAGroupIndex

DUA group index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.27.1.1

xklDUAGroupNumber

DUA group number.

XklDUAGroupNumberEnum

Type Values:

-1	none
0	group0
1	group1
2	group2
3	group3

Description:

Represents a DUA group value.

.1.3.6.1.4.1.21150.1.1.27.1.2

xklDUAGroupName

DUA group name.

xklDatapathClientPortIndex

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.27.1.3

xklDatapathClientPortTable

table

.1.3.6.1.4.1.21150.1.1.31 · 1 row entry · 8 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklDatapathClientPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklDatapathClientPortTable'

Datapath Client Port table.

xklDatapathClientPortEntry row .1.3.6.1.4.1.21150.1.1.31.1

Datapath client port table entry.

Indexes

Column	Syntax	OID
xklDatapathClientPortIndex Datapath Client Port table index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.31.1.1`
xklDatapathClientPortDescription Datapath Client port description.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.31.1.2`
xklDatapathClientPortRxFrameCount Accepted receive frame count.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21150.1.1.31.1.3`
xklDatapathClientPortRxDropCount Dropped receive frame count.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21150.1.1.31.1.4`
xklDatapathClientPortRxUtilization Receive utilization percentage.	1/10 %SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.31.1.5`
xklDatapathClientPortTxFrameCount Accepted transmit frame count.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21150.1.1.31.1.6`
xklDatapathClientPortTxDropCount Dropped transmit frame count.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21150.1.1.31.1.7`
xklDatapathClientPortTxUtilization Transmit utilization percentage.	1/10 %SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.31.1.8`

xklDatapathWavePortTable

table

.1.3.6.1.4.1.21150.1.1.33 · 1 row entry · 8 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklDatapathWavePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklDatapathWavePortTable'

Datapath Wave Port table.

xklDatapathWavePortEntry row .1.3.6.1.4.1.21150.1.1.33.1

Datapath wave port table entry.

Indexes

xklDatapathWavePortIndex

Column	Syntax	OID
xklDatapathWavePortIndex Datapath Wave Port table index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.33.1.1`
xklDatapathWavePortDescription Datapath Wave port description.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.33.1.2`
xklDatapathWavePortRxFrameCount Accepted receive frame count.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21150.1.1.33.1.3`
xklDatapathWavePortRxDropCount Dropped receive frame count.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21150.1.1.33.1.4`
xklDatapathWavePortRxUtilization Receive utilization percentage.	1/10 %SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.33.1.5`
xklDatapathWavePortTxFrameCount Accepted transmit frame count.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21150.1.1.33.1.6`
xklDatapathWavePortTxDropCount Dropped transmit frame count.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.21150.1.1.33.1.7`
xklDatapathWavePortTxUtilization Transmit utilization percentage.	1/10 %SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.33.1.8`

xklWaveMediaSidePMTable

table

.1.3.6.1.4.1.21150.1.1.35 · 1 row entry · 48 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveMediaSidePMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveMediaSidePMTable'

Wave media-side performance monitor counter table.

xklWaveMediaSidePMEntry row .1.3.6.1.4.1.21150.1.1.35.1

Wave media-side performance monitor counter entry.

Indexes

xklWaveMediaSidePMIndex

Column Syntax OID

xklWaveMediaSidePMIndex

Wave media-side PM counter table index.
The index is static-mapped to (wave port + 1).

xklWaveMediaSidePMWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.35.1.1

Wave port.

xklWaveMediaSidePMWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.35.1.2

Wave status.

xklWaveMediaSidePMWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.35.1.3

Wave description.

xklWaveMediaSidePMRxOSNRCurrent

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.35.1.4

Rx Optical Signal Noise Ratio (OSNR) current.

xklWaveMediaSidePMRxOSNRMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.5

Rx Optical Signal Noise Ratio (OSNR) minimum.

xklWaveMediaSidePMRxOSNRMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.6

Rx Optical Signal Noise Ratio (OSNR) maximum.

xklWaveMediaSidePMRxOSNRAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.7

Rx Optical Signal Noise Ratio (OSNR) average.

xklWaveMediaSidePMRxESNRCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.8

Rx Media electrical Signal Noise Ratio (eSNR) current.

xklWaveMediaSidePMRxESNRMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.9

Rx Media electrical Signal Noise Ratio (eSNR) minimum.

xklWaveMediaSidePMRxESNRMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.10

Rx Media electrical Signal Noise Ratio (eSNR) maximum.

xklWaveMediaSidePMRxESNRAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.11

Rx Media electrical Signal Noise Ratio (eSNR) average.

xklWaveMediaSidePMRxCDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.12

Rx Chromatic Dispersion (CD) current.

xklWaveMediaSidePMRxCDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.13

Rx Chromatic Dispersion (CD) minimum.

xklWaveMediaSidePMRxCDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.14

Rx Chromatic Dispersion (CD) maximum.

xklWaveMediaSidePMRxCDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.15

Rx Chromatic Dispersion (CD) average.

xklWaveMediaSidePMRxDGDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.16

Rx Differential Group Delay (DGD) current.

xklWaveMediaSidePMRxDGDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.17

Rx Differential Group Delay (DGD) minimum.

xklWaveMediaSidePMRxDGDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.18

Rx Differential Group Delay (DGD) maximum.

xklWaveMediaSidePMRxDGDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.19

Rx Differential Group Delay (DGD) average.

xklWaveMediaSidePMRxSOPMDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.20

Rx Second Order Polarization Mode Dispersion (SOPMD) current.

xklWaveMediaSidePMRxSOPMDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.21

Rx Second Order Polarization Mode Dispersion (SOPMD) minimum.

xklWaveMediaSidePMRxSOPMDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.22

Rx Second Order Polarization Mode Dispersion (SOPMD) maximum.

xklWaveMediaSidePMRxSOPMDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.23

Rx Second Order Polarization Mode Dispersion (SOPMD) average.

xklWaveMediaSidePMRxPDLCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.24

Rx Polarization Dependent Loss (PDL) current.

xklWaveMediaSidePMRxPDLMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.25

Rx Polarization Dependent Loss (PDL) minimum.

xklWaveMediaSidePMRxPDLMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.26

Rx Polarization Dependent Loss (PDL) maximum.

xklWaveMediaSidePMRxPDLAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.27

Rx Polarization Dependent Loss (PDL) average.

xklWaveMediaSidePMRxCFOCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.28

Rx Carrier Frequency Offset (CFO) current.

xklWaveMediaSidePMRxCFOMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.29

Rx Carrier Frequency Offset (CFO) minimum.

xklWaveMediaSidePMRxCFOMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.30

Rx Carrier Frequency Offset (CFO) maximum.

xklWaveMediaSidePMRxCFOAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.31

Rx Carrier Frequency Offset (CFO) average.

xklWaveMediaSidePMRxSOPROCCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.32

Rx State Of Polarization (SOP) Rate Of Change (ROC) current.

xklWaveMediaSidePMRxSOPROCMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.33

Rx State Of Polarization (SOP) Rate Of Change (ROC) minimum.

xklWaveMediaSidePMRxSOPROCMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.34

Rx State Of Polarization (SOP) Rate Of Change (ROC) maximum.

xklWaveMediaSidePMRxSOPROCAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.35

Rx State Of Polarization (SOP) Rate Of Change (ROC) average.

xklWaveMediaSidePMRxTotalPowerCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.36

Rx Total Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.37

xklWaveMediaSidePMRxTotalPowerMin

Rx Total Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.38

xklWaveMediaSidePMRxTotalPowerMax

Rx Total Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.39

xklWaveMediaSidePMRxTotalPowerAvg

Rx Total Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.40

xklWaveMediaSidePMRxSignalPowerCurrent

Rx Signal Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.41

xklWaveMediaSidePMRxSignalPowerMin

Rx Signal Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.42

xklWaveMediaSidePMRxSignalPowerMax

Rx Signal Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.43

xklWaveMediaSidePMRxSignalPowerAvg

Rx Signal Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.44

xklWaveMediaSidePMTxOutputPowerCurrent

Tx Output Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.45

xklWaveMediaSidePMTxOutputPowerMin

Tx Output Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.46

xklWaveMediaSidePMTxOutputPowerMax

Tx Output Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.47

xklWaveMediaSidePMTxOutputPowerAvg

Tx Output Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.35.1.48

xklClientMediaSidePMTable

table

.1.3.6.1.4.1.21150.1.1.37 · 1 row entry · 48 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientMediaSidePMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientMediaSidePMTable'

Client media-side performance monitor counter table.

xklClientMediaSidePMEntry row .1.3.6.1.4.1.21150.1.1.37.1

Client media-side performance monitor counter entry.

Indexes

xklClientMediaSidePMIndex

Column Syntax OID

xklClientMediaSidePMIndex

Client media-side PM counter table index.
The index is static-mapped to (client port + 1).

xklClientMediaSidePMClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.37.1.1

Client port.

xklClientMediaSidePMClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.37.1.2

Client status.

xklClientMediaSidePMClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.37.1.3

Client description.

xklClientMediaSidePMRxOSNRCurrent

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.37.1.4

Rx Optical Signal Noise Ratio (OSNR) current.

xklClientMediaSidePMRxOSNRMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.5

Rx Optical Signal Noise Ratio (OSNR) minimum.

xklClientMediaSidePMRxOSNRMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.6

Rx Optical Signal Noise Ratio (OSNR) maximum.

xklClientMediaSidePMRxOSNRAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.7

Rx Optical Signal Noise Ratio (OSNR) average.

xklClientMediaSidePMRxESNRCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.8

Rx Media electrical Signal Noise Ratio (eSNR) current.

xklClientMediaSidePMRxESNRMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.9

Rx Media electrical Signal Noise Ratio (eSNR) minimum.

xklClientMediaSidePMRxESNRMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.10

Rx Media electrical Signal Noise Ratio (eSNR) maximum.

xklClientMediaSidePMRxESNRAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.11

Rx Media electrical Signal Noise Ratio (eSNR) average.

xklClientMediaSidePMRxCDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.12

Rx Chromatic Dispersion (CD) current.

xklClientMediaSidePMRxCDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.13

Rx Chromatic Dispersion (CD) minimum.

xklClientMediaSidePMRxCDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.14

Rx Chromatic Dispersion (CD) maximum.

xklClientMediaSidePMRxCDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.15

Rx Chromatic Dispersion (CD) average.

xklClientMediaSidePMRxDGDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.16

Rx Differential Group Delay (DGD) current.

xklClientMediaSidePMRxDGDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.17

Rx Differential Group Delay (DGD) minimum.

xklClientMediaSidePMRxDGDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.18

Rx Differential Group Delay (DGD) maximum.

xklClientMediaSidePMRxDGDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.19

Rx Differential Group Delay (DGD) average.

xklClientMediaSidePMRxSOPMDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.20

Rx Second Order Polarization Mode Dispersion (SOPMD) current.

xklClientMediaSidePMRxSOPMDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.21

Rx Second Order Polarization Mode Dispersion (SOPMD) minimum.

xklClientMediaSidePMRxSOPMDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.22

Rx Second Order Polarization Mode Dispersion (SOPMD) maximum.

xklClientMediaSidePMRxSOPMDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.23

Rx Second Order Polarization Mode Dispersion (SOPMD) average.

xklClientMediaSidePMRxPDLCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.24

Rx Polarization Dependent Loss (PDL) current.

xklClientMediaSidePMRxPDLMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.25

Rx Polarization Dependent Loss (PDL) minimum.

xklClientMediaSidePMRxPDLMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.26

Rx Polarization Dependent Loss (PDL) maximum.

xklClientMediaSidePMRxPDLAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.27

Rx Polarization Dependent Loss (PDL) average.

xklClientMediaSidePMRxCFOCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.28

Rx Carrier Frequency Offset (CFO) current.

xklClientMediaSidePMRxCFOMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.29

Rx Carrier Frequency Offset (CFO) minimum.

xklClientMediaSidePMRxCFOMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.30

Rx Carrier Frequency Offset (CFO) maximum.

xklClientMediaSidePMRxCFOAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.31

Rx Carrier Frequency Offset (CFO) average.

xklClientMediaSidePMRxSOPROCCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.32

Rx State Of Polarization (SOP) Rate Of Change (ROC) current.

xklClientMediaSidePMRxSOPROCMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.33

Rx State Of Polarization (SOP) Rate Of Change (ROC) minimum.

xklClientMediaSidePMRxSOPROCMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.34

Rx State Of Polarization (SOP) Rate Of Change (ROC) maximum.

xklClientMediaSidePMRxSOPROCAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.35

Rx State Of Polarization (SOP) Rate Of Change (ROC) average.

xklClientMediaSidePMRxTotalPowerCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.36

Rx Total Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.37

xklClientMediaSidePMRxTotalPowerMin

Rx Total Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.38

xklClientMediaSidePMRxTotalPowerMax

Rx Total Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.39

xklClientMediaSidePMRxTotalPowerAvg

Rx Total Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.40

xklClientMediaSidePMRxSignalPowerCurrent

Rx Signal Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.41

xklClientMediaSidePMRxSignalPowerMin

Rx Signal Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.42

xklClientMediaSidePMRxSignalPowerMax

Rx Signal Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.43

xklClientMediaSidePMRxSignalPowerAvg

Rx Signal Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.44

xklClientMediaSidePMTxOutputPowerCurrent

Tx Output Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.45

xklClientMediaSidePMTxOutputPowerMin

Tx Output Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.46

xklClientMediaSidePMTxOutputPowerMax

Tx Output Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.47

xklClientMediaSidePMTxOutputPowerAvg

Tx Output Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.37.1.48

xklWaveHostSideRxBERTable

table

.1.3.6.1.4.1.21150.1.1.39 · 1 row entry · 22 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideRxBERTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideRxBERTable'

Wave host-side Rx BER stats table.

xklWaveHostSideRxBEREntry row .1.3.6.1.4.1.21150.1.1.39.1

Wave host-side Rx BER stats entry.

Indexes

xklWaveHostSideRxBERIndex1 xklWaveHostSideRxBERIndex2

Column Syntax OID

xklWaveHostSideRxBERIndex1

Wave host-side Rx BER stats table index 1.
The index is static-mapped to (wave port + 1).

xklWaveHostSideRxBERIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.39.1.1

Wave host-side Rx BER stats table index 2.
The index is static-mapped to media lane Id.

xklWaveHostSideRxBERWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.39.1.2

Wave port.

xklWaveHostSideRxBERLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.39.1.3

Lane Id.

xklWaveHostSideRxBERWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.39.1.4

Wave status.

xklWaveHostSideRxBERWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.39.1.5

Wave description.

xklWaveHostSideRxBERPreFECCurrentMantissa

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.39.1.6

This object gives the mantissa part of the Media Pre-FEC BER current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideRxBERPreFECCurrentExponent.
Media Pre-FEC BER current …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.39.1.7

xklWaveHostSideRxBERPreFECCurrentExponent

This object gives the exponent part of the Media Pre-FEC BER current.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideRxBERPreFECCurrentMantissa.
Media Pre-FEC BER current is expresse…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.39.1.8

xklWaveHostSideRxBERPreFECMinMantissa

This object gives the mantissa part of the Media Pre-FEC BER minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideRxBERPreFECMinExponent.
Media Pre-FEC BER minimum is e…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.39.1.9

xklWaveHostSideRxBERPreFECMinExponent

This object gives the exponent part of the Media Pre-FEC BER minimum.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideRxBERPreFECMinMantissa.
Media Pre-FEC BER minimum is expressed in…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.39.1.10

xklWaveHostSideRxBERPreFECMaxMantissa

This object gives the mantissa part of the Media Pre-FEC BER maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideRxBERPreFECMaxExponent.
Media Pre-FEC BER maximum is e…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.39.1.11

xklWaveHostSideRxBERPreFECMaxExponent

This object gives the exponent part of the Media Pre-FEC BER maximum.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideRxBERPreFECMaxMantissa.
Media Pre-FEC BER maximum is expressed in…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.39.1.12

xklWaveHostSideRxBERPreFECAvgMantissa

This object gives the mantissa part of the Media Pre-FEC BER average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideRxBERPreFECAvgExponent.
Media Pre-FEC BER average is e…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.39.1.13

xklWaveHostSideRxBERPreFECAvgExponent

This object gives the exponent part of the Media Pre-FEC BER average.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideRxBERPreFECAvgMantissa.
Media Pre-FEC BER average is expressed in…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.39.1.14

xklWaveHostSideRxBERErrFramesCurrentMantissa

This object gives the mantissa part of the Media Err Frames current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideRxBERErrFramesCurrentExponent.
Media Err Frames current…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.39.1.15

xklWaveHostSideRxBERErrFramesCurrentExponent

This object gives the exponent part of the Media Err Frames current.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideRxBERErrFramesCurrentMantissa.
Media Err Frames current is express…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.39.1.16

xklWaveHostSideRxBERErrFramesMinMantissa

This object gives the mantissa part of the Media Err Frames minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideRxBERErrFramesMinExponent.
Media Err Frames minimum is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.39.1.17

xklWaveHostSideRxBERErrFramesMinExponent

This object gives the exponent part of the Media Err Frames minimum.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideRxBERErrFramesMinMantissa.
Media Err Frames minimum is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.39.1.18

xklWaveHostSideRxBERErrFramesMaxMantissa

This object gives the mantissa part of the Media Err Frames maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideRxBERErrFramesMaxExponent.
Media Err Frames maximum is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.39.1.19

xklWaveHostSideRxBERErrFramesMaxExponent

This object gives the exponent part of the Media Err Frames maximum.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideRxBERErrFramesMaxMantissa.
Media Err Frames maximum is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.39.1.20

xklWaveHostSideRxBERErrFramesAvgMantissa

This object gives the mantissa part of the Media Err Frames average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideRxBERErrFramesAvgExponent.
Media Err Frames average is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.39.1.21

xklWaveHostSideRxBERErrFramesAvgExponent

This object gives the exponent part of the Media Err Frames average.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideRxBERErrFramesAvgMantissa.
Media Err Frames average is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.39.1.22

xklClientHostSideRxBERTable

table

.1.3.6.1.4.1.21150.1.1.41 · 1 row entry · 22 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideRxBERTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideRxBERTable'

Client host-side Rx BER stats table.

xklClientHostSideRxBEREntry row .1.3.6.1.4.1.21150.1.1.41.1

Client host-side Rx BER stats entry.

Indexes

xklClientHostSideRxBERIndex1 xklClientHostSideRxBERIndex2

Column Syntax OID

xklClientHostSideRxBERIndex1

Client host-side Rx BER stats table index 1.
The index is static-mapped to (client port + 1).

xklClientHostSideRxBERIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.41.1.1

Client host-side Rx BER stats table index 2.
The index is static-mapped to media lane Id.

xklClientHostSideRxBERClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.41.1.2

Client port.

xklClientHostSideRxBERLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.41.1.3

Lane Id.

xklClientHostSideRxBERClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.41.1.4

Client status.

xklClientHostSideRxBERClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.41.1.5

Client description.

xklClientHostSideRxBERPreFECCurrentMantissa

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.41.1.6

This object gives the mantissa part of the Media Pre-FEC BER current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideRxBERPreFECCurrentExponent.
Media Pre-FEC BER curren…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.41.1.7

xklClientHostSideRxBERPreFECCurrentExponent

This object gives the exponent part of the Media Pre-FEC BER current.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideRxBERPreFECCurrentMantissa.
Media Pre-FEC BER current is expres…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.41.1.8

xklClientHostSideRxBERPreFECMinMantissa

This object gives the mantissa part of the Media Pre-FEC BER minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideRxBERPreFECMinExponent.
Media Pre-FEC BER minimum is…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.41.1.9

xklClientHostSideRxBERPreFECMinExponent

This object gives the exponent part of the Media Pre-FEC BER minimum.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideRxBERPreFECMinMantissa.
Media Pre-FEC BER minimum is expressed …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.41.1.10

xklClientHostSideRxBERPreFECMaxMantissa

This object gives the mantissa part of the Media Pre-FEC BER maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideRxBERPreFECMaxExponent.
Media Pre-FEC BER maximum is…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.41.1.11

xklClientHostSideRxBERPreFECMaxExponent

This object gives the exponent part of the Media Pre-FEC BER maximum.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideRxBERPreFECMaxMantissa.
Media Pre-FEC BER maximum is expressed …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.41.1.12

xklClientHostSideRxBERPreFECAvgMantissa

This object gives the mantissa part of the Media Pre-FEC BER average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideRxBERPreFECAvgExponent.
Media Pre-FEC BER average is…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.41.1.13

xklClientHostSideRxBERPreFECAvgExponent

This object gives the exponent part of the Media Pre-FEC BER average.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideRxBERPreFECAvgMantissa.
Media Pre-FEC BER average is expressed …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.41.1.14

xklClientHostSideRxBERErrFramesCurrentMantissa

This object gives the mantissa part of the Media Err Frames current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideRxBERErrFramesCurrentExponent.
Media Err Frames curre…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.41.1.15

xklClientHostSideRxBERErrFramesCurrentExponent

This object gives the exponent part of the Media Err Frames current.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideRxBERErrFramesCurrentMantissa.
Media Err Frames current is expre…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.41.1.16

xklClientHostSideRxBERErrFramesMinMantissa

This object gives the mantissa part of the Media Err Frames minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideRxBERErrFramesMinExponent.
Media Err Frames minimum i…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.41.1.17

xklClientHostSideRxBERErrFramesMinExponent

This object gives the exponent part of the Media Err Frames minimum.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideRxBERErrFramesMinMantissa.
Media Err Frames minimum is expressed…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.41.1.18

xklClientHostSideRxBERErrFramesMaxMantissa

This object gives the mantissa part of the Media Err Frames maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideRxBERErrFramesMaxExponent.
Media Err Frames maximum i…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.41.1.19

xklClientHostSideRxBERErrFramesMaxExponent

This object gives the exponent part of the Media Err Frames maximum.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideRxBERErrFramesMaxMantissa.
Media Err Frames maximum is expressed…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.41.1.20

xklClientHostSideRxBERErrFramesAvgMantissa

This object gives the mantissa part of the Media Err Frames average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideRxBERErrFramesAvgExponent.
Media Err Frames average i…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.41.1.21

xklClientHostSideRxBERErrFramesAvgExponent

This object gives the exponent part of the Media Err Frames average.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideRxBERErrFramesAvgMantissa.
Media Err Frames average is expressed…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.41.1.22

xklWaveHostSideTxBERTable

table

.1.3.6.1.4.1.21150.1.1.43 · 1 row entry · 23 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideTxBERTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideTxBERTable'

Wave host-side Tx BER stats table.

xklWaveHostSideTxBEREntry row .1.3.6.1.4.1.21150.1.1.43.1

Wave host-side Tx BER stats entry.

Indexes

xklWaveHostSideTxBERIndex1 xklWaveHostSideTxBERIndex2

Column Syntax OID

xklWaveHostSideTxBERIndex1

Wave host-side Tx BER stats table index 1.
The index is static-mapped to (wave port + 1).

xklWaveHostSideTxBERIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.43.1.1

Wave host-side Tx BER stats table index 2.
The index is static-mapped to (host group Id + 1).

xklWaveHostSideTxBERWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.43.1.2

Wave port.

xklWaveHostSideTxBERGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.43.1.3

Host group Id.

xklWaveHostSideTxBERLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.43.1.4

Lane Id (1,3,5,7).

xklWaveHostSideTxBERWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.43.1.5

Wave status.

xklWaveHostSideTxBERWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.43.1.6

Wave description.

xklWaveHostSideTxBERPreFECCurrentMantissa

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.43.1.7

This object gives the mantissa part of the Host Pre-FEC BER current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideTxBERPreFECCurrentExponent.
Host Pre-FEC BER current is…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.43.1.8

xklWaveHostSideTxBERPreFECCurrentExponent

This object gives the exponent part of the Host Pre-FEC BER current.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideTxBERPreFECCurrentMantissa.
Host Pre-FEC BER current is expressed …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.43.1.9

xklWaveHostSideTxBERPreFECMinMantissa

This object gives the mantissa part of the Host Pre-FEC BER minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideTxBERPreFECMinExponent.
Host Pre-FEC BER minimum is exp…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.43.1.10

xklWaveHostSideTxBERPreFECMinExponent

This object gives the exponent part of the Host Pre-FEC BER minimum.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideTxBERPreFECMinMantissa.
Host Pre-FEC BER minimum is expressed in S…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.43.1.11

xklWaveHostSideTxBERPreFECMaxMantissa

This object gives the mantissa part of the Host Pre-FEC BER maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideTxBERPreFECMaxExponent.
Host Pre-FEC BER maximum is exp…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.43.1.12

xklWaveHostSideTxBERPreFECMaxExponent

This object gives the exponent part of the Host Pre-FEC BER maximum.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideTxBERPreFECMaxMantissa.
Host Pre-FEC BER maximum is expressed in S…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.43.1.13

xklWaveHostSideTxBERPreFECAvgMantissa

This object gives the mantissa part of the Host Pre-FEC BER average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideTxBERPreFECAvgExponent.
Host Pre-FEC BER average is exp…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.43.1.14

xklWaveHostSideTxBERPreFECAvgExponent

This object gives the exponent part of the Host Pre-FEC BER average.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideTxBERPreFECAvgMantissa.
Host Pre-FEC BER average is expressed in S…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.43.1.15

xklWaveHostSideTxBERErrFramesCurrentMantissa

This object gives the mantissa part of the Host Err Frames current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideTxBERErrFramesCurrentExponent.
Host Err Frames current i…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.43.1.16

xklWaveHostSideTxBERErrFramesCurrentExponent

This object gives the exponent part of the Host Err Frames current.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideTxBERErrFramesCurrentMantissa.
Host Err Frames current is expressed…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.43.1.17

xklWaveHostSideTxBERErrFramesMinMantissa

This object gives the mantissa part of the Host Err Frames minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideTxBERErrFramesMinExponent.
Host Err Frames minimum is ex…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.43.1.18

xklWaveHostSideTxBERErrFramesMinExponent

This object gives the exponent part of the Host Err Frames minimum.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideTxBERErrFramesMinMantissa.
Host Err Frames minimum is expressed in …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.43.1.19

xklWaveHostSideTxBERErrFramesMaxMantissa

This object gives the mantissa part of the Host Err Frames maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideTxBERErrFramesMaxExponent.
Host Err Frames maximum is ex…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.43.1.20

xklWaveHostSideTxBERErrFramesMaxExponent

This object gives the exponent part of the Host Err Frames maximum.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideTxBERErrFramesMaxMantissa.
Host Err Frames maximum is expressed in …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.43.1.21

xklWaveHostSideTxBERErrFramesAvgMantissa

This object gives the mantissa part of the Host Err Frames average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklWaveHostSideTxBERErrFramesAvgExponent.
Host Err Frames average is ex…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.43.1.22

xklWaveHostSideTxBERErrFramesAvgExponent

This object gives the exponent part of the Host Err Frames average.
It is represented in powers of 10. The mantissa part is
defined in xklWaveHostSideTxBERErrFramesAvgMantissa.
Host Err Frames average is expressed in …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.43.1.23

xklClientHostSideTxBERTable

table

.1.3.6.1.4.1.21150.1.1.45 · 1 row entry · 23 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideTxBERTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideTxBERTable'

Client host-side Tx BER stats table.

xklClientHostSideTxBEREntry row .1.3.6.1.4.1.21150.1.1.45.1

Client host-side Tx BER stats entry.

Indexes

xklClientHostSideTxBERIndex1 xklClientHostSideTxBERIndex2

Column Syntax OID

xklClientHostSideTxBERIndex1

Client host-side Tx BER stats table index 1.
The index is static-mapped to (client port + 1).

xklClientHostSideTxBERIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.45.1.1

Client host-side Tx BER stats table index 2.
The index is static-mapped to (host group Id + 1).

xklClientHostSideTxBERClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.45.1.2

Client port.

xklClientHostSideTxBERGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.45.1.3

Host group Id.

xklClientHostSideTxBERLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.45.1.4

Lane Id (1,3,5,7).

xklClientHostSideTxBERClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.45.1.5

Client status.

xklClientHostSideTxBERClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.45.1.6

Client description.

xklClientHostSideTxBERPreFECCurrentMantissa

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.45.1.7

This object gives the mantissa part of the Host Pre-FEC BER current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideTxBERPreFECCurrentExponent.
Host Pre-FEC BER current …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.45.1.8

xklClientHostSideTxBERPreFECCurrentExponent

This object gives the exponent part of the Host Pre-FEC BER current.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideTxBERPreFECCurrentMantissa.
Host Pre-FEC BER current is expresse…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.45.1.9

xklClientHostSideTxBERPreFECMinMantissa

This object gives the mantissa part of the Host Pre-FEC BER minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideTxBERPreFECMinExponent.
Host Pre-FEC BER minimum is e…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.45.1.10

xklClientHostSideTxBERPreFECMinExponent

This object gives the exponent part of the Host Pre-FEC BER minimum.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideTxBERPreFECMinMantissa.
Host Pre-FEC BER minimum is expressed in…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.45.1.11

xklClientHostSideTxBERPreFECMaxMantissa

This object gives the mantissa part of the Host Pre-FEC BER maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideTxBERPreFECMaxExponent.
Host Pre-FEC BER maximum is e…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.45.1.12

xklClientHostSideTxBERPreFECMaxExponent

This object gives the exponent part of the Host Pre-FEC BER maximum.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideTxBERPreFECMaxMantissa.
Host Pre-FEC BER maximum is expressed in…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.45.1.13

xklClientHostSideTxBERPreFECAvgMantissa

This object gives the mantissa part of the Host Pre-FEC BER average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideTxBERPreFECAvgExponent.
Host Pre-FEC BER average is e…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.45.1.14

xklClientHostSideTxBERPreFECAvgExponent

This object gives the exponent part of the Host Pre-FEC BER average.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideTxBERPreFECAvgMantissa.
Host Pre-FEC BER average is expressed in…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.45.1.15

xklClientHostSideTxBERErrFramesCurrentMantissa

This object gives the mantissa part of the Host Err Frames current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideTxBERErrFramesCurrentExponent.
Host Err Frames current…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.45.1.16

xklClientHostSideTxBERErrFramesCurrentExponent

This object gives the exponent part of the Host Err Frames current.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideTxBERErrFramesCurrentMantissa.
Host Err Frames current is express…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.45.1.17

xklClientHostSideTxBERErrFramesMinMantissa

This object gives the mantissa part of the Host Err Frames minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideTxBERErrFramesMinExponent.
Host Err Frames minimum is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.45.1.18

xklClientHostSideTxBERErrFramesMinExponent

This object gives the exponent part of the Host Err Frames minimum.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideTxBERErrFramesMinMantissa.
Host Err Frames minimum is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.45.1.19

xklClientHostSideTxBERErrFramesMaxMantissa

This object gives the mantissa part of the Host Err Frames maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideTxBERErrFramesMaxExponent.
Host Err Frames maximum is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.45.1.20

xklClientHostSideTxBERErrFramesMaxExponent

This object gives the exponent part of the Host Err Frames maximum.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideTxBERErrFramesMaxMantissa.
Host Err Frames maximum is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.45.1.21

xklClientHostSideTxBERErrFramesAvgMantissa

This object gives the mantissa part of the Host Err Frames average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklClientHostSideTxBERErrFramesAvgExponent.
Host Err Frames average is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.45.1.22

xklClientHostSideTxBERErrFramesAvgExponent

This object gives the exponent part of the Host Err Frames average.
It is represented in powers of 10. The mantissa part is
defined in xklClientHostSideTxBERErrFramesAvgMantissa.
Host Err Frames average is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.45.1.23

xklWaveHostSideRxPMTable

table

.1.3.6.1.4.1.21150.1.1.47 · 1 row entry · 8 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideRxPMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideRxPMTable'

Wave host-side Rx PM counter table.

xklWaveHostSideRxPMEntry row .1.3.6.1.4.1.21150.1.1.47.1

Wave host-side Rx PM counter entry.

Indexes

xklWaveHostSideRxPMIndex

Column Syntax OID

xklWaveHostSideRxPMIndex

Wave host-side Rx PM counter table index.
The index is static-mapped to (wave port + 1).

xklWaveHostSideRxPMWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.47.1.1

Wave port.

xklWaveHostSideRxPMWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.47.1.2

Wave status.

xklWaveHostSideRxPMWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.47.1.3

Wave description.

xklWaveHostSideRxPMRxBits

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.47.1.4

Rx Bits.

xklWaveHostSideRxPMRxCorrectedBits

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.47.1.5

Rx Corrected Bits.

xklWaveHostSideRxPMRxFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.47.1.6

Rx Frames.

xklWaveHostSideRxPMRxFrameUncorrectedErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.47.1.7

Rx Frame Uncorrected Errors.

xklClientHostSideRxPMIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.47.1.8

xklClientHostSideRxPMTable

table

.1.3.6.1.4.1.21150.1.1.49 · 1 row entry · 8 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideRxPMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideRxPMTable'

Client host-side Rx PM counter table.

xklClientHostSideRxPMEntry row .1.3.6.1.4.1.21150.1.1.49.1

Client host-side Rx PM counter entry.

Indexes

Column Syntax OID

xklClientHostSideRxPMIndex

Client host-side Rx PM counter table index.
The index is static-mapped to (client port + 1).

xklClientHostSideRxPMClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.49.1.1

Client port.

xklClientHostSideRxPMClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.49.1.2

Client status.

xklClientHostSideRxPMClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.49.1.3

Client description.

xklClientHostSideRxPMRxBits

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.49.1.4

Rx Bits.

xklClientHostSideRxPMRxCorrectedBits

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.49.1.5

Rx Corrected Bits.

xklClientHostSideRxPMRxFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.49.1.6

Rx Frames.

xklClientHostSideRxPMRxFrameUncorrectedErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.49.1.7

Rx Frame Uncorrected Errors.

xklWaveHostSideTxPMIndex1 xklWaveHostSideTxPMIndex2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.49.1.8

xklWaveHostSideTxPMTable

table

.1.3.6.1.4.1.21150.1.1.51 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideTxPMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideTxPMTable'

Wave host-side Tx PM counter table.

xklWaveHostSideTxPMEntry row .1.3.6.1.4.1.21150.1.1.51.1

Wave host-side Tx PM counter entry.

Indexes

Column Syntax OID

xklWaveHostSideTxPMIndex1

Wave host-side Tx PM counter table index.
The index is static-mapped to (wave port + 1).

xklWaveHostSideTxPMIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.51.1.1

Wave host-side Tx PM counter table index.
The index is static-mapped to (host group Id + 1).

xklWaveHostSideTxPMWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.51.1.2

Wave port.

xklWaveHostSideTxPMGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.51.1.3

Host group Id.

xklWaveHostSideTxPMWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.51.1.4

Wave status.

xklWaveHostSideTxPMWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.51.1.5

Wave description.

xklWaveHostSideTxPMTxBits

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.51.1.6

Tx Bits.

xklWaveHostSideTxPMTxCorrectedBits

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.51.1.7

Tx Corrected Bits.

xklWaveHostSideTxPMTxFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.51.1.8

Tx Frames.

xklWaveHostSideTxPMTxFrameUncorrectedErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.51.1.9

Tx Frame Uncorrected Errors.

xklClientHostSideTxPMIndex1 xklClientHostSideTxPMIndex2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.51.1.10

xklClientHostSideTxPMTable

table

.1.3.6.1.4.1.21150.1.1.53 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideTxPMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideTxPMTable'

Client host-side Tx PM counter table.

xklClientHostSideTxPMEntry row .1.3.6.1.4.1.21150.1.1.53.1

Client host-side Tx PM counter entry.

Indexes

Column Syntax OID

xklClientHostSideTxPMIndex1

Client host-side Tx PM counter table index.
The index is static-mapped to (client port + 1).

xklClientHostSideTxPMIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.53.1.1

Client host-side Tx PM counter table index.
The index is static-mapped to (host group Id + 1).

xklClientHostSideTxPMClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.53.1.2

Client port.

xklClientHostSideTxPMGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.53.1.3

Host group Id.

xklClientHostSideTxPMClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.53.1.4

Client status.

xklClientHostSideTxPMClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.53.1.5

Client description.

xklClientHostSideTxPMTxBits

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.53.1.6

Tx Bits.

xklClientHostSideTxPMTxCorrectedBits

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.53.1.7

Tx Corrected Bits.

xklClientHostSideTxPMTxFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.53.1.8

Tx Frames.

xklClientHostSideTxPMTxFrameUncorrectedErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.53.1.9

Tx Frame Uncorrected Errors.

xklWaveHostSideRxPMSubIntIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.53.1.10

xklWaveHostSideRxPMSubIntTable

table

.1.3.6.1.4.1.21150.1.1.55 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideRxPMSubIntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideRxPMSubIntTable'

Wave host-side Rx PM sub-interval counter table.

xklWaveHostSideRxPMSubIntEntry row .1.3.6.1.4.1.21150.1.1.55.1

Wave host-side Rx PM sub-interval counter entry.

Indexes

Column Syntax OID

xklWaveHostSideRxPMSubIntIndex

Wave host-side Rx PM sub-interval counter table index.
The index is static-mapped to (wave port + 1).

xklWaveHostSideRxPMSubIntWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.55.1.1

Wave port.

xklWaveHostSideRxPMSubIntWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.55.1.2

Wave status.

xklWaveHostSideRxPMSubIntWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.55.1.3

Wave description.

xklWaveHostSideRxPMSubIntRxBitsAvg

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.55.1.4

Rx Bits average.

xklWaveHostSideRxPMSubIntRxCorrectedBitMin

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.55.1.5

Rx Corrected Bits minimum.

xklWaveHostSideRxPMSubIntRxCorrectedBitMax

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.55.1.6

Rx Corrected Bits maximum.

xklWaveHostSideRxPMSubIntRxFramesAvg

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.55.1.7

Rx Frames average.

xklWaveHostSideRxPMSubIntRxFrameUncorrectedMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.55.1.8

Rx Frame Uncorrected minimum.

xklWaveHostSideRxPMSubIntRxFrameUncorrectedMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.55.1.9

Rx Frame Uncorrected maximum.

xklClientHostSideRxPMSubIntIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.55.1.10

xklClientHostSideRxPMSubIntTable

table

.1.3.6.1.4.1.21150.1.1.57 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideRxPMSubIntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideRxPMSubIntTable'

Client host-side Rx PM sub-interval counter table.

xklClientHostSideRxPMSubIntEntry row .1.3.6.1.4.1.21150.1.1.57.1

Client host-side Rx PM sub-interval counter entry.

Indexes

Column Syntax OID

xklClientHostSideRxPMSubIntIndex

Client host-side Rx PM sub-interval counter table index.
The index is static-mapped to (client port + 1).

xklClientHostSideRxPMSubIntClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.57.1.1

Client port.

xklClientHostSideRxPMSubIntClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.57.1.2

Client status.

xklClientHostSideRxPMSubIntClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.57.1.3

Client description.

xklClientHostSideRxPMSubIntRxBitsAvg

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.57.1.4

Rx Bits.

xklClientHostSideRxPMSubIntRxCorrectedBitMin

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.57.1.5

Rx Corrected Bits minimum.

xklClientHostSideRxPMSubIntRxCorrectedBitMax

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.57.1.6

Rx Corrected Bits maximum.

xklClientHostSideRxPMSubIntRxFramesAvg

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.57.1.7

Rx Frames.

xklClientHostSideRxPMSubIntRxFrameUncorrectedMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.57.1.8

Rx Frame Uncorrected minimum.

xklClientHostSideRxPMSubIntRxFrameUncorrectedMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.57.1.9

Rx Frame Uncorrected maximum.

xklWaveHostSideTxPMSubIntIndex1 xklWaveHostSideTxPMSubIntIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.57.1.10

xklWaveHostSideTxPMSubIntTable

table

.1.3.6.1.4.1.21150.1.1.59 · 1 row entry · 12 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideTxPMSubIntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideTxPMSubIntTable'

Wave host-side Tx PM sub-interval counter table.

xklWaveHostSideTxPMSubIntEntry row .1.3.6.1.4.1.21150.1.1.59.1

Wave host-side Tx PM sub-interval counter entry.

Indexes

Column Syntax OID

xklWaveHostSideTxPMSubIntIndex1

Wave host-side Tx PM sub-interval counter table index.
The index is static-mapped to (wave port + 1).

xklWaveHostSideTxPMSubIntIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.59.1.1

Wave host-side Tx PM sub-interval counter table index.
The index is static-mapped to (host group Id + 1).

xklWaveHostSideTxPMSubIntWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.59.1.2

Wave port.

xklWaveHostSideTxPMSubIntGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.59.1.3

Host group Id.

xklWaveHostSideTxPMSubIntWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.59.1.4

Wave status.

xklWaveHostSideTxPMSubIntWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.59.1.5

Wave description.

xklWaveHostSideTxPMSubIntTxBitsAvg

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.59.1.6

Tx Bits average.

xklWaveHostSideTxPMSubIntTxCorrectedBitMin

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.59.1.7

Tx Corrected Bits minimum.

xklWaveHostSideTxPMSubIntTxCorrectedBitMax

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.59.1.8

Tx Corrected Bits maximum.

xklWaveHostSideTxPMSubIntTxFramesAvg

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.59.1.9

Tx Frames average.

xklWaveHostSideTxPMSubIntTxFrameUncorrectedMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.59.1.10

Tx Frame Uncorrected minimum.

xklWaveHostSideTxPMSubIntTxFrameUncorrectedMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.59.1.11

Tx Frame Uncorrected maximum.

xklClientHostSideTxPMSubIntIndex1 xklClientHostSideTxPMSubIntIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.59.1.12

xklClientHostSideTxPMSubIntTable

table

.1.3.6.1.4.1.21150.1.1.61 · 1 row entry · 12 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideTxPMSubIntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideTxPMSubIntTable'

Client host-side Tx PM sub-interval counter table.

xklClientHostSideTxPMSubIntEntry row .1.3.6.1.4.1.21150.1.1.61.1

Client host-side Tx PM sub-interval counter entry.

Indexes

Column Syntax OID

xklClientHostSideTxPMSubIntIndex1

Client host-side Tx PM sub-interval counter table index.
The index is static-mapped to (client port + 1).

xklClientHostSideTxPMSubIntIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.61.1.1

Client host-side Tx PM sub-interval counter table index.
The index is static-mapped to (host group Id + 1).

xklClientHostSideTxPMSubIntClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.61.1.2

Client port.

xklClientHostSideTxPMSubIntGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.61.1.3

Host group Id.

xklClientHostSideTxPMSubIntClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.61.1.4

Client status.

xklClientHostSideTxPMSubIntClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.61.1.5

Client description.

xklClientHostSideTxPMSubIntTxBitsAvg

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.61.1.6

Tx Bits average.

xklClientHostSideTxPMSubIntTxCorrectedBitMin

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.61.1.7

Tx Corrected Bits minimum.

xklClientHostSideTxPMSubIntTxCorrectedBitMax

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.61.1.8

Tx Corrected Bits maximum.

xklClientHostSideTxPMSubIntTxFramesAvg

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.61.1.9

Tx Frames average.

xklClientHostSideTxPMSubIntTxFrameUncorrectedMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.61.1.10

Tx Frame Uncorrected minimum.

xklClientHostSideTxPMSubIntTxFrameUncorrectedMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.61.1.11

Tx Frame Uncorrected maximum.

xklWaveHostSideRxPMEthIndex1 xklWaveHostSideRxPMEthIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.61.1.12

xklWaveHostSideRxPMEthTable

table

.1.3.6.1.4.1.21150.1.1.63 · 1 row entry · 34 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideRxPMEthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideRxPMEthTable'

Wave host-side Rx PM ethernet counter table.

xklWaveHostSideRxPMEthEntry row .1.3.6.1.4.1.21150.1.1.63.1

Wave host-side Rx PM ethernet counter entry.

Indexes

Column Syntax OID

xklWaveHostSideRxPMEthIndex1

Wave host-side Rx PM ethernet counter table index 1.
The index is static-mapped to (wave port + 1).

xklWaveHostSideRxPMEthIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.63.1.1

Wave host-side Rx PM ethernet counter table index 2.
The index is static-mapped to (host group Id + 1).

xklWaveHostSideRxPMEthWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.63.1.2

Wave port.

xklWaveHostSideRxPMEthGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.63.1.3

Host group Id.

xklWaveHostSideRxPMEthLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.63.1.4

Host lane Id.

xklWaveHostSideRxPMEthWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.63.1.5

Wave status.

xklWaveHostSideRxPMEthWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.63.1.6

Wave description.

xklWaveHostSideRxPMEthRxUtil

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.63.1.7

Rx Utilization.

xklWaveHostSideRxPMEthRxFrames

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.63.1.8

Rx Frames.

xklWaveHostSideRxPMEthRxBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.9

Rx Bytes.

xklWaveHostSideRxPMEthRxMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.10

Rx Multicast Frames.

xklWaveHostSideRxPMEthRxBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.11

Rx Broadcast Frames.

xklWaveHostSideRxPMEthRx64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.12

Rx 64 Byte Frames.

xklWaveHostSideRxPMEthRx65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.13

Rx 65 to 127 Byte Frames.

xklWaveHostSideRxPMEthRx128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.14

Rx 128 to 255 Byte Frames.

xklWaveHostSideRxPMEthRx256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.15

Rx 256 to 511 Byte Frames.

xklWaveHostSideRxPMEthRx512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.16

Rx 512 to 1023 Byte Frames.

xklWaveHostSideRxPMEthRx1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.17

Rx 1024 to 1518 Byte Frames.

xklWaveHostSideRxPMEthRx1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.18

Rx 1519 to Jumbo Byte Frames.

xklWaveHostSideRxPMEthRxGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.19

Rx >= Jumbo Byte Frames.

xklWaveHostSideRxPMEthRxBadFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.20

Rx Bad Frames.

xklWaveHostSideRxPMEthRxBadBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.21

Rx Bad Bytes.

xklWaveHostSideRxPMEthRxBadMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.22

Rx Bad Multicast Frames.

xklWaveHostSideRxPMEthRxBadBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.23

Rx Bad Broadcast Frames.

xklWaveHostSideRxPMEthRxBadCRCFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.24

Rx Bad CRC Frames.

xklWaveHostSideRxPMEthRxBadLt64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.25

Rx Bad < 64 Byte Frames.

xklWaveHostSideRxPMEthRxBad64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.26

Rx Bad 64 Byte Frames.

xklWaveHostSideRxPMEthRxBad65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.27

Rx Bad 65 to 127 Byte Frames.

xklWaveHostSideRxPMEthRxBad128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.28

Rx Bad 128 to 255 Byte Frames.

xklWaveHostSideRxPMEthRxBad256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.29

Rx Bad 256 to 511 Byte Frames.

xklWaveHostSideRxPMEthRxBad512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.30

Rx Bad 512 to 1023 Byte Frames.

xklWaveHostSideRxPMEthRxBad1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.31

Rx Bad 1024 to 1518 Byte Frames.

xklWaveHostSideRxPMEthRxBad1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.32

Rx Bad 1519 to Jumbo Byte Frames.

xklWaveHostSideRxPMEthRxBadGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.33

Rx Bad >= Jumbo Byte Frames.

xklClientHostSideRxPMEthIndex1 xklClientHostSideRxPMEthIndex2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.63.1.34

xklClientHostSideRxPMEthTable

table

.1.3.6.1.4.1.21150.1.1.65 · 1 row entry · 34 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideRxPMEthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideRxPMEthTable'

Client host-side Rx PM ethernet counter table.

xklClientHostSideRxPMEthEntry row .1.3.6.1.4.1.21150.1.1.65.1

Client host-side Rx PM ethernet counter entry.

Indexes

Column Syntax OID

xklClientHostSideRxPMEthIndex1

Client host-side Rx PM ethernet counter table index 1.
The index is static-mapped to (client port + 1).

xklClientHostSideRxPMEthIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.65.1.1

Client host-side Rx PM ethernet counter table index 2.
The index is static-mapped to (host group Id + 1).

xklClientHostSideRxPMEthClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.65.1.2

Client port.

xklClientHostSideRxPMEthGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.65.1.3

Host group Id.

xklClientHostSideRxPMEthLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.65.1.4

Host Lane Id.

xklClientHostSideRxPMEthClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.65.1.5

Client status.

xklClientHostSideRxPMEthClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.65.1.6

Client description.

xklClientHostSideRxPMEthRxUtil

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.65.1.7

Rx Utilization.

xklClientHostSideRxPMEthRxFrames

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.65.1.8

Rx Frames.

xklClientHostSideRxPMEthRxBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.9

Rx Bytes.

xklClientHostSideRxPMEthRxMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.10

Rx Multicast Frames.

xklClientHostSideRxPMEthRxBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.11

Rx Broadcast Frames.

xklClientHostSideRxPMEthRx64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.12

Rx 64 Byte Frames.

xklClientHostSideRxPMEthRx65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.13

Rx 65 to 127 Byte Frames.

xklClientHostSideRxPMEthRx128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.14

Rx 128 to 255 Byte Frames.

xklClientHostSideRxPMEthRx256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.15

Rx 256 to 511 Byte Frames.

xklClientHostSideRxPMEthRx512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.16

Rx 512 to 1023 Byte Frames.

xklClientHostSideRxPMEthRx1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.17

Rx 1024 to 1518 Byte Frames.

xklClientHostSideRxPMEthRx1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.18

Rx 1519 to Jumbo Byte Frames.

xklClientHostSideRxPMEthRxGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.19

Rx >= Jumbo Byte Frames.

xklClientHostSideRxPMEthRxBadFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.20

Rx Bad Frames.

xklClientHostSideRxPMEthRxBadBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.21

Rx Bad Bytes.

xklClientHostSideRxPMEthRxBadMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.22

Rx Bad Multicast Frames.

xklClientHostSideRxPMEthRxBadBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.23

Rx Bad Broadcast Frames.

xklClientHostSideRxPMEthRxBadCRCFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.24

Rx Bad CRC Frames.

xklClientHostSideRxPMEthRxBadLt64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.25

Rx Bad < 64 Byte Frames.

xklClientHostSideRxPMEthRxBad64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.26

Rx Bad 64 Byte Frames.

xklClientHostSideRxPMEthRxBad65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.27

Rx Bad 65 to 127 Byte Frames.

xklClientHostSideRxPMEthRxBad128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.28

Rx Bad 128 to 255 Byte Frames.

xklClientHostSideRxPMEthRxBad256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.29

Rx Bad 256 to 511 Byte Frames.

xklClientHostSideRxPMEthRxBad512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.30

Rx Bad 512 to 1023 Byte Frames.

xklClientHostSideRxPMEthRxBad1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.31

Rx Bad 1024 to 1518 Byte Frames.

xklClientHostSideRxPMEthRxBad1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.32

Rx Bad 1519 to Jumbo Byte Frames.

xklClientHostSideRxPMEthRxBadGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.33

Rx Bad >= Jumbo Byte Frames.

xklWaveHostSideTxPMEthIndex1 xklWaveHostSideTxPMEthIndex2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.65.1.34

xklWaveHostSideTxPMEthTable

table

.1.3.6.1.4.1.21150.1.1.67 · 1 row entry · 34 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideTxPMEthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideTxPMEthTable'

Wave host-side Tx PM ethernet counter table.

xklWaveHostSideTxPMEthEntry row .1.3.6.1.4.1.21150.1.1.67.1

Wave host-side Tx PM ethernet counter entry.

Indexes

Column Syntax OID

xklWaveHostSideTxPMEthIndex1

Wave host-side Tx PM ethernet counter table index 1.
The index is static-mapped to (wave port + 1).

xklWaveHostSideTxPMEthIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.67.1.1

Wave host-side Tx PM ethernet counter table index 2.
The index is static-mapped to (host group Id + 1).

xklWaveHostSideTxPMEthWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.67.1.2

Wave port.

xklWaveHostSideTxPMEthGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.67.1.3

Host group Id.

xklWaveHostSideTxPMEthLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.67.1.4

Host lane Id.

xklWaveHostSideTxPMEthWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.67.1.5

Wave status.

xklWaveHostSideTxPMEthWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.67.1.6

Wave description.

xklWaveHostSideTxPMEthTxUtil

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.67.1.7

Tx Utilization.

xklWaveHostSideTxPMEthTxFrames

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.67.1.8

Tx Frames.

xklWaveHostSideTxPMEthTxBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.9

Tx Bytes.

xklWaveHostSideTxPMEthTxMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.10

Tx Multicast Frames.

xklWaveHostSideTxPMEthTxBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.11

Tx Broadcast Frames.

xklWaveHostSideTxPMEthTx64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.12

Tx 64 Byte Frames.

xklWaveHostSideTxPMEthTx65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.13

Tx 65 to 127 Byte Frames.

xklWaveHostSideTxPMEthTx128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.14

Tx 128 to 255 Byte Frames.

xklWaveHostSideTxPMEthTx256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.15

Tx 256 to 511 Byte Frames.

xklWaveHostSideTxPMEthTx512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.16

Tx 512 to 1023 Byte Frames.

xklWaveHostSideTxPMEthTx1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.17

Tx 1024 to 1518 Byte Frames.

xklWaveHostSideTxPMEthTx1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.18

Tx 1519 to Jumbo Byte Frames.

xklWaveHostSideTxPMEthTxGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.19

Tx >= Jumbo Byte Frames.

xklWaveHostSideTxPMEthTxBadFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.20

Tx Bad Frames.

xklWaveHostSideTxPMEthTxBadBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.21

Tx Bad Bytes.

xklWaveHostSideTxPMEthTxBadMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.22

Tx Bad Multicast Frames.

xklWaveHostSideTxPMEthTxBadBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.23

Tx Bad Broadcast Frames.

xklWaveHostSideTxPMEthTxBadCRCFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.24

Tx Bad CRC Frames.

xklWaveHostSideTxPMEthTxBadLt64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.25

Tx Bad < 64 Byte Frames.

xklWaveHostSideTxPMEthTxBad64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.26

Tx Bad 64 Byte Frames.

xklWaveHostSideTxPMEthTxBad65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.27

Tx Bad 65 to 127 Byte Frames.

xklWaveHostSideTxPMEthTxBad128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.28

Tx Bad 128 to 255 Byte Frames.

xklWaveHostSideTxPMEthTxBad256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.29

Tx Bad 256 to 511 Byte Frames.

xklWaveHostSideTxPMEthTxBad512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.30

Tx Bad 512 to 1023 Byte Frames.

xklWaveHostSideTxPMEthTxBad1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.31

Tx Bad 1024 to 1518 Byte Frames.

xklWaveHostSideTxPMEthTxBad1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.32

Tx Bad 1519 to Jumbo Byte Frames.

xklWaveHostSideTxPMEthTxBadGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.33

Tx Bad >= Jumbo Byte Frames.

xklClientHostSideTxPMEthIndex1 xklClientHostSideTxPMEthIndex2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.67.1.34

xklClientHostSideTxPMEthTable

table

.1.3.6.1.4.1.21150.1.1.69 · 1 row entry · 34 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideTxPMEthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideTxPMEthTable'

Client host-side Tx PM ethernet counter table.

xklClientHostSideTxPMEthEntry row .1.3.6.1.4.1.21150.1.1.69.1

Client host-side Tx PM ethernet counter entry.

Indexes

Column Syntax OID

xklClientHostSideTxPMEthIndex1

Client host-side Tx PM ethernet counter table index 1.
The index is static-mapped to (Client port + 1).

xklClientHostSideTxPMEthIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.69.1.1

Client host-side Tx PM ethernet counter table index 2.
The index is static-mapped to (host group Id + 1).

xklClientHostSideTxPMEthClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.69.1.2

Client port.

xklClientHostSideTxPMEthGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.69.1.3

Host group Id.

xklClientHostSideTxPMEthLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.69.1.4

Host Lane Id.

xklClientHostSideTxPMEthClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.69.1.5

Client status.

xklClientHostSideTxPMEthClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.69.1.6

Client description.

xklClientHostSideTxPMEthTxUtil

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.69.1.7

Tx Utilization.

xklClientHostSideTxPMEthTxFrames

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.69.1.8

Tx Frames.

xklClientHostSideTxPMEthTxBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.9

Tx Bytes.

xklClientHostSideTxPMEthTxMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.10

Tx Multicast Frames.

xklClientHostSideTxPMEthTxBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.11

Tx Broadcast Frames.

xklClientHostSideTxPMEthTx64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.12

Tx 64 Byte Frames.

xklClientHostSideTxPMEthTx65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.13

Tx 65 to 127 Byte Frames.

xklClientHostSideTxPMEthTx128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.14

Tx 128 to 255 Byte Frames.

xklClientHostSideTxPMEthTx256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.15

Tx 256 to 511 Byte Frames.

xklClientHostSideTxPMEthTx512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.16

Tx 512 to 1023 Byte Frames.

xklClientHostSideTxPMEthTx1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.17

Tx 1024 to 1518 Byte Frames.

xklClientHostSideTxPMEthTx1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.18

Tx 1519 to Jumbo Byte Frames.

xklClientHostSideTxPMEthTxGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.19

Tx >= Jumbo Byte Frames.

xklClientHostSideTxPMEthTxBadFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.20

Tx Bad Frames.

xklClientHostSideTxPMEthTxBadBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.21

Tx Bad Bytes.

xklClientHostSideTxPMEthTxBadMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.22

Tx Bad Multicast Frames.

xklClientHostSideTxPMEthTxBadBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.23

Tx Bad Broadcast Frames.

xklClientHostSideTxPMEthTxBadCRCFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.24

Tx Bad CRC Frames.

xklClientHostSideTxPMEthTxBadLt64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.25

Tx Bad < 64 Byte Frames.

xklClientHostSideTxPMEthTxBad64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.26

Tx Bad 64 Byte Frames.

xklClientHostSideTxPMEthTxBad65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.27

Tx Bad 65 to 127 Byte Frames.

xklClientHostSideTxPMEthTxBad128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.28

Tx Bad 128 to 255 Byte Frames.

xklClientHostSideTxPMEthTxBad256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.29

Tx Bad 256 to 511 Byte Frames.

xklClientHostSideTxPMEthTxBad512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.30

Tx Bad 512 to 1023 Byte Frames.

xklClientHostSideTxPMEthTxBad1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.31

Tx Bad 1024 to 1518 Byte Frames.

xklClientHostSideTxPMEthTxBad1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.32

Tx Bad 1519 to Jumbo Byte Frames.

xklClientHostSideTxPMEthTxBadGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.33

Tx Bad >= Jumbo Byte Frames.

xklWSSBandIndex1 xklWSSBandIndex2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.69.1.34

xklWSSBandTable

table

.1.3.6.1.4.1.21150.1.1.71 · 1 row entry · 12 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWSSBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWSSBandTable'

WSS Band table.

xklWSSBandEntry row .1.3.6.1.4.1.21150.1.1.71.1

WSS Band table entry.

Indexes

Column Syntax OID

xklWSSBandIndex1

WSS Device Index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.71.1.1

xklWSSBandIndex2

WSS Band Index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.71.1.2

xklWSSBandCenterFreq

WSS Band Center Frequency.

MHzSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.71.1.3

xklWSSBandBandwidth

WSS Band Bandwidth.

MHzSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.71.1.4

xklWSSBandAttenuation

WSS Band Attenuation.

1/10 dBSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.71.1.5

xklWSSBandRxPwr

WSS Band Receive Power.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.71.1.6

xklWSSBandPort

WSS Band Port Connection.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.71.1.7

xklWSSBandPortName

WSS Band Port Name Connection.

xklWSSBandProtectionEnabled

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.71.1.8

Is WSS Line Protection feature enabled for this band.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.21150.1.1.71.1.9

xklWSSBandProtectionPrimaryLine

WSS Band Primary Line.

xklWSSBandProtectionActiveLine

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.71.1.10

WSS Band Active Line.

xklWSSBandProtectionBackupPwr

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.71.1.11

WSS Band Power from the Backup Line.

xklWaveMediaSideTxModIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.71.1.12

xklWaveMediaSideTxModTable

table

.1.3.6.1.4.1.21150.1.1.73 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveMediaSideTxModTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveMediaSideTxModTable'

Wave media-side Tx modulator performance counter table.

xklWaveMediaSideTxModEntry row .1.3.6.1.4.1.21150.1.1.73.1

Wave media-side Tx modulator performance counter entry.

Indexes

Column Syntax OID

xklWaveMediaSideTxModIndex

Wave media-side Tx modulator performance counter table index.
The index is static-mapped to (wave port + 1).

xklWaveMediaSideTxModWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.73.1.1

Wave port.

xklWaveMediaSideTxModWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.73.1.2

Wave status.

xklWaveMediaSideTxModWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.73.1.3

Wave description.

xklWaveMediaSideTxModBiasXI

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.73.1.4

Tx Modulator Bias X/I.

xklWaveMediaSideTxModBiasXQ

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.73.1.5

Tx Modulator Bias X/Q.

xklWaveMediaSideTxModBiasYI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.73.1.6

Tx Modulator Bias Y/I.

xklWaveMediaSideTxModBiasYQ

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.73.1.7

Tx Modulator Bias Y/Q.

xklWaveMediaSideTxModBiasXPhase

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.73.1.8

Tx Modulator Bias X Phase.

xklWaveMediaSideTxModBiasYPhase

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.73.1.9

Tx Modulator Bias Y Phase.

xklClientMediaSideTxModIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.73.1.10

xklClientMediaSideTxModTable

table

.1.3.6.1.4.1.21150.1.1.75 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientMediaSideTxModTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientMediaSideTxModTable'

Client media-side Tx modulator performance counter table.

xklClientMediaSideTxModEntry row .1.3.6.1.4.1.21150.1.1.75.1

Client media-side Tx modulator performance counter entry.

Indexes

Column Syntax OID

xklClientMediaSideTxModIndex

Client media-side Tx modulator performance counter table index.
The index is static-mapped to (client port + 1).

xklClientMediaSideTxModClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.75.1.1

Client port.

xklClientMediaSideTxModClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.75.1.2

Client status.

xklClientMediaSideTxModClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.75.1.3

Client description.

xklClientMediaSideTxModBiasXI

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.75.1.4

Tx Modulator Bias X/I.

xklClientMediaSideTxModBiasXQ

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.75.1.5

Tx Modulator Bias X/Q.

xklClientMediaSideTxModBiasYI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.75.1.6

Tx Modulator Bias Y/I.

xklClientMediaSideTxModBiasYQ

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.75.1.7

Tx Modulator Bias Y/Q.

xklClientMediaSideTxModBiasXPhase

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.75.1.8

Tx Modulator Bias X Phase.

xklClientMediaSideTxModBiasYPhase

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.75.1.9

Tx Modulator Bias Y Phase.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.75.1.10

xklWSSHardwareTable

table

.1.3.6.1.4.1.21150.1.1.77 · 1 row entry · 5 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWSSHardwareTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWSSHardwareTable'

WSS Hardware table.

xklWSSHardwareEntry row .1.3.6.1.4.1.21150.1.1.77.1

WSS Hardware table entry.

Indexes

xklWSSHardwareIndex

Column	Syntax	OID
xklWSSHardwareIndex WSS Device Index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.77.1.1`
xklWSSHardwareManufacturer WSS Device manufacturer.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.77.1.2`
xklWSSHardwareManufactureDate WSS Device manufacture date.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.77.1.3`
xklWSSHardwarePartNumber WSS Device manufacturer part number.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.77.1.4`
xklWSSHardwareSerialNumber WSS Device manufacturer serial number.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.77.1.5`

xklOCMHardwareTable

table

.1.3.6.1.4.1.21150.1.1.79 · 1 row entry · 5 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklOCMHardwareTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklOCMHardwareTable'

OCM Hardware table.

xklOCMHardwareEntry row .1.3.6.1.4.1.21150.1.1.79.1

OCM Hardware table entry.

Indexes

xklOCMHardwareIndex

Column	Syntax	OID
xklOCMHardwareIndex OCM Device Index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.79.1.1`
xklOCMHardwareManufacturer OCM Device manufacturer.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.79.1.2`
xklOCMHardwareManufactureDate OCM Device manufacture date.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.79.1.3`
xklOCMHardwarePartNumber OCM Device manufacturer part number.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.79.1.4`
xklOCMHardwareSerialNumber OCM Device manufacturer serial number.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.79.1.5`

xklMemoryTable

table

.1.3.6.1.4.1.21150.1.1.81 · 1 row entry · 6 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklMemoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklMemoryTable'

XKL memory table.

xklMemoryEntry row .1.3.6.1.4.1.21150.1.1.81.1

XKL memory table entry.

Indexes

xklMemoryIndex

Column	Syntax	OID
xklMemoryIndex XKL memory table index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.81.1.1`
xklMemoryDXMOSFixedAllocation DXMOS fixed allocation.	pagesSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21150.1.1.81.1.2`
xklMemoryMappedSystemMemory Mapped system memory.	pagesSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21150.1.1.81.1.3`
xklMemorySystemMemoryAvailable System memory available.	pagesSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21150.1.1.81.1.4`
xklMemorySystemMemoryTotal Total pages of system memory.	pagesSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21150.1.1.81.1.5`
xklMemoryDynamicMemory Dynamic memory (included in mapped memory).	pagesSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21150.1.1.81.1.6`

xklRegulatorTable

table

.1.3.6.1.4.1.21150.1.1.83 · 1 row entry · 15 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklRegulatorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklRegulatorTable'

Regulator table.

xklRegulatorEntry row .1.3.6.1.4.1.21150.1.1.83.1

Regulator table entry.

Indexes

xklRegulatorIndex

Column Syntax OID

xklRegulatorIndex

Regulator table index.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.83.1.1

xklRegulatorName

Name of the regulator in DXMOS.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.83.1.2

xklRegulatorBoardName

Name of the board that the regulator belongs to.

xklRegulatorReferenceDesignator

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.83.1.3

The given PCB reference designator for the regulator.

xklRegulatorNominalVoltage

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.83.1.4

Nominal output voltage for the regulator (mV or 0 if not reportable).

xklRegulatorOutputVoltage

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.83.1.5

Output voltage of the regulator (mV or 0 if not reportable).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.83.1.6

xklRegulatorInputVoltage

Input voltage of the regulator (mV or 0 if not reportable).

xklRegulatorOutputCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.83.1.7

Output current of the regulator (mA or 0 if not reportable).

xklRegulatorPowerGoodState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.83.1.8

State of the regulator's power good pin.

Enumeration

Enumerated Values:

1	false
2	true
3	notAvailable

.1.3.6.1.4.1.21150.1.1.83.1.9

xklRegulatorAlertState

State of the regulator's alert pin.

Enumeration

Enumerated Values:

1	noAlert
2	alert
3	notAvailable

.1.3.6.1.4.1.21150.1.1.83.1.10

xklRegulatorStatusWord

Regulator status word decoded.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.83.1.11

xklRegulatorStatusVout

Regulator Vout status byte decoded.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.83.1.12

xklRegulatorStatusIout

Regulator Iout status byte decoded.

xklRegulatorStatusTemperature

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.83.1.13

Regulator temperature status byte decoded.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.83.1.14

xklRegulatorStatusCML

Regulator CML status byte decoded.

xklOCMBandIndex1 xklOCMBandIndex2

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.83.1.15

xklOCMBandTable

table

.1.3.6.1.4.1.21150.1.1.85 · 1 row entry · 11 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklOCMBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklOCMBandTable'

OCM Band table.

xklOCMBandEntry row .1.3.6.1.4.1.21150.1.1.85.1

OCM Band table entry.

Indexes

Column	Syntax	OID
xklOCMBandIndex1 OCM Port index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.85.1.1`
xklOCMBandIndex2 OCM Band index.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.85.1.2`
xklOCMBandPortName OCM Port Name.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.85.1.3`
xklOCMBandPortDefaultWaveplan OCM Port Default Waveplan.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.85.1.4`
xklOCMBandPortPath OCM Port Path Description.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.85.1.5`
xklOCMBandCenterFreq OCM Band Center Frequency.	MHzSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.85.1.6`
xklOCMBandBandwidth OCM Band Bandwidth.	MHzSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.21150.1.1.85.1.7`
xklOCMBandPower OCM Band Power.	1/10 dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21150.1.1.85.1.8`
xklOCMBandLowAlarmThreshold OCM Band Low Alarm Threshold Setpoint.	1/10 dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21150.1.1.85.1.9`
xklOCMBandLowAlarmHysteresis OCM Band Low Alarm Threshold Hysteresis.	1/10 dBmSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.21150.1.1.85.1.10`
xklOCMBandStatus OCM Band Status.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.21150.1.1.85.1.11`

xklWaveHostSideRxPCSAlarmTable

table

.1.3.6.1.4.1.21150.1.1.87 · 1 row entry · 17 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideRxPCSAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideRxPCSAlarmTable'

Wave host-side Rx physical coding sublayer (PCS) alarm table.

xklWaveHostSideRxPCSAlarmEntry row .1.3.6.1.4.1.21150.1.1.87.1

Wave host-side Rx physical coding sublayer (PCS) alarm entry.

Indexes

xklWaveHostSideRxPCSAlarmIndex1 xklWaveHostSideRxPCSAlarmIndex2

Column Syntax OID

xklWaveHostSideRxPCSAlarmIndex1

Wave host-side Rx physical coding sublayer (PCS) alarm table index 1.
The index is static-mapped to (wave port + 1).

xklWaveHostSideRxPCSAlarmIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.87.1.1

Wave host-side Rx physical coding sublayer (PCS) alarm table index 2.
The index is static-mapped to (host group Id + 1).

xklWaveHostSideRxPCSAlarmWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.87.1.2

Wave port.

xklWaveHostSideRxPCSAlarmGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.87.1.3

Host group Id.

xklWaveHostSideRxPCSAlarmLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.87.1.4

Host lane Id.

xklWaveHostSideRxPCSAlarmWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.87.1.5

Wave status.

xklWaveHostSideRxPCSAlarmWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.87.1.6

Wave description.

xklWaveHostSideRxPCSAlarmRemoteFault

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.87.1.7

Rx remote fault.

xklWaveHostSideRxPCSAlarmPCSErrorBlocks

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.8

Rx PCS error blocks.

xklWaveHostSideRxPCSAlarmPCSBIPErrors

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.9

Rx PCS BIP errors.

xklWaveHostSideRxPCSAlarmPCSLOSDetect

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.10

Rx PCS LOS.

xklWaveHostSideRxPCSAlarmLocalFault

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.11

Rx local fault.

xklWaveHostSideRxPCSAlarmLOAMarkerLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.12

Rx loss of alignment marker lock.

xklWaveHostSideRxPCSAlarmLossOfAlignment

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.13

Rx loss of alignment.

xklWaveHostSideRxPCSAlarmLossOfBlockLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.14

Rx loss of block lock.

xklWaveHostSideRxPCSAlarmPCSCFI

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.15

Rx PCS consequent fault insertion.

xklWaveHostSideRxPCSAlarmPCSInvalidBlock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.16

Rx PCS invalid blocks.

xklWaveHostSideTxPCSAlarmIndex1 xklWaveHostSideTxPCSAlarmIndex2

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.87.1.17

xklWaveHostSideTxPCSAlarmTable

table

.1.3.6.1.4.1.21150.1.1.89 · 1 row entry · 17 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklWaveHostSideTxPCSAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklWaveHostSideTxPCSAlarmTable'

Wave host-side Tx physical coding sublayer (PCS) alarm table.

xklWaveHostSideTxPCSAlarmEntry row .1.3.6.1.4.1.21150.1.1.89.1

Wave host-side Tx physical coding sublayer (PCS) alarm entry.

Indexes

Column Syntax OID

xklWaveHostSideTxPCSAlarmIndex1

Wave host-side Tx physical coding sublayer (PCS) alarm table index 1.
The index is static-mapped to (wave port + 1).

xklWaveHostSideTxPCSAlarmIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.89.1.1

Wave host-side Tx physical coding sublayer (PCS) alarm table index 2.
The index is static-mapped to (host group Id + 1).

xklWaveHostSideTxPCSAlarmWavePort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.89.1.2

Wave port.

xklWaveHostSideTxPCSAlarmGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.89.1.3

Host group Id.

xklWaveHostSideTxPCSAlarmLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.89.1.4

Host lane Id.

xklWaveHostSideTxPCSAlarmWaveStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.89.1.5

Wave status.

xklWaveHostSideTxPCSAlarmWaveDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.89.1.6

Wave description.

xklWaveHostSideTxPCSAlarmRemoteFault

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.89.1.7

Tx remote fault.

xklWaveHostSideTxPCSAlarmPCSErrorBlocks

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.8

Tx PCS error blocks.

xklWaveHostSideTxPCSAlarmPCSBIPErrors

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.9

Tx PCS BIP errors.

xklWaveHostSideTxPCSAlarmHighBER

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.10

Tx high BER.

xklWaveHostSideTxPCSAlarmLocalFault

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.11

Tx local fault.

xklWaveHostSideTxPCSAlarmLOAMarkerLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.12

Tx loss of alignment marker lock.

xklWaveHostSideTxPCSAlarmLossOfAlignment

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.13

Tx loss of alignment.

xklWaveHostSideTxPCSAlarmLossOfBlockLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.14

Tx loss of block lock.

xklWaveHostSideTxPCSAlarmPCSCFI

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.15

Tx PCS consequent fault insertion.

xklWaveHostSideTxPCSAlarmFECDegradedSER

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.16

Tx FEC degraded SER.

xklClientHostSideRxPCSAlarmIndex1 xklClientHostSideRxPCSAlarmIndex2

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.89.1.17

xklClientHostSideRxPCSAlarmTable

table

.1.3.6.1.4.1.21150.1.1.91 · 1 row entry · 17 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideRxPCSAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideRxPCSAlarmTable'

Client host-side Rx physical coding sublayer (PCS) alarm table.

xklClientHostSideRxPCSAlarmEntry row .1.3.6.1.4.1.21150.1.1.91.1

Client host-side Rx physical coding sublayer (PCS) alarm entry.

Indexes

Column Syntax OID

xklClientHostSideRxPCSAlarmIndex1

Client host-side Rx physical coding sublayer (PCS) alarm table index 1.
The index is static-mapped to (client port + 1).

xklClientHostSideRxPCSAlarmIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.91.1.1

Client host-side Rx physical coding sublayer (PCS) alarm table index 2.
The index is static-mapped to (host group Id + 1).

xklClientHostSideRxPCSAlarmClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.91.1.2

Client port.

xklClientHostSideRxPCSAlarmGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.91.1.3

Host group Id.

xklClientHostSideRxPCSAlarmLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.91.1.4

Host lane Id.

xklClientHostSideRxPCSAlarmClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.91.1.5

Client status.

xklClientHostSideRxPCSAlarmClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.91.1.6

Client description.

xklClientHostSideRxPCSAlarmRemoteFault

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.91.1.7

Rx remote fault.

xklClientHostSideRxPCSAlarmPCSErrorBlocks

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.8

Rx PCS error blocks.

xklClientHostSideRxPCSAlarmPCSBIPErrors

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.9

Rx PCS BIP errors.

xklClientHostSideRxPCSAlarmPCSLOSDetect

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.10

Rx PCS LOS.

xklClientHostSideRxPCSAlarmLocalFault

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.11

Rx local fault.

xklClientHostSideRxPCSAlarmLOAMarkerLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.12

Rx loss of alignment marker lock.

xklClientHostSideRxPCSAlarmLossOfAlignment

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.13

Rx loss of alignment.

xklClientHostSideRxPCSAlarmLossOfBlockLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.14

Rx loss of block lock.

xklClientHostSideRxPCSAlarmPCSCFI

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.15

Rx PCS consequent fault insertion.

xklClientHostSideRxPCSAlarmPCSInvalidBlock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.16

Rx PCS invalid blocks.

xklClientHostSideTxPCSAlarmIndex1 xklClientHostSideTxPCSAlarmIndex2

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.91.1.17

xklClientHostSideTxPCSAlarmTable

table

.1.3.6.1.4.1.21150.1.1.93 · 1 row entry · 17 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklClientHostSideTxPCSAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklClientHostSideTxPCSAlarmTable'

Client host-side Tx physical coding sublayer (PCS) alarm table.

xklClientHostSideTxPCSAlarmEntry row .1.3.6.1.4.1.21150.1.1.93.1

Client host-side Tx physical coding sublayer (PCS) alarm entry.

Indexes

Column Syntax OID

xklClientHostSideTxPCSAlarmIndex1

Client host-side Tx physical coding sublayer (PCS) alarm table index 1.
The index is static-mapped to (client port + 1).

xklClientHostSideTxPCSAlarmIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.93.1.1

Client host-side Tx physical coding sublayer (PCS) alarm table index 2.
The index is static-mapped to (host group Id + 1).

xklClientHostSideTxPCSAlarmClientPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.93.1.2

Client port.

xklClientHostSideTxPCSAlarmGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.93.1.3

Host group Id.

xklClientHostSideTxPCSAlarmLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.93.1.4

Host lane Id.

xklClientHostSideTxPCSAlarmClientStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.93.1.5

Client status.

xklClientHostSideTxPCSAlarmClientDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.93.1.6

Client description.

xklClientHostSideTxPCSAlarmRemoteFault

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.93.1.7

Tx remote fault.

xklClientHostSideTxPCSAlarmPCSErrorBlocks

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.8

Tx PCS error blocks.

xklClientHostSideTxPCSAlarmPCSBIPErrors

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.9

Tx PCS BIP errors.

xklClientHostSideTxPCSAlarmHighBER

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.10

Tx high BER.

xklClientHostSideTxPCSAlarmLocalFault

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.11

Tx local fault.

xklClientHostSideTxPCSAlarmLOAMarkerLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.12

Tx loss of alignment marker lock.

xklClientHostSideTxPCSAlarmLossOfAlignment

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.13

Tx loss of alignment.

xklClientHostSideTxPCSAlarmLossOfBlockLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.14

Tx loss of block lock.

xklClientHostSideTxPCSAlarmPCSCFI

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.15

Tx PCS consequent fault insertion.

xklClientHostSideTxPCSAlarmFECDegradedSER

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.16

Tx FEC degraded SER.

xklChannelMediaSidePMIndex

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.93.1.17

xklChannelMediaSidePMTable

table

.1.3.6.1.4.1.21150.1.1.95 · 1 row entry · 48 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelMediaSidePMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelMediaSidePMTable'

Channel media-side performance monitor counter table.

xklChannelMediaSidePMEntry row .1.3.6.1.4.1.21150.1.1.95.1

Channel media-side performance monitor counter entry.

Indexes

Column Syntax OID

xklChannelMediaSidePMIndex

Channel media-side PM counter table index.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelMediaSidePMChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.95.1.1

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelMediaSidePMChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.95.1.2

Channel status.

xklChannelMediaSidePMChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.95.1.3

Channel description.

xklChannelMediaSidePMRxOSNRCurrent

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.95.1.4

Rx Optical Signal Noise Ratio (OSNR) current.

xklChannelMediaSidePMRxOSNRMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.5

Rx Optical Signal Noise Ratio (OSNR) minimum.

xklChannelMediaSidePMRxOSNRMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.6

Rx Optical Signal Noise Ratio (OSNR) maximum.

xklChannelMediaSidePMRxOSNRAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.7

Rx Optical Signal Noise Ratio (OSNR) average.

xklChannelMediaSidePMRxESNRCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.8

Rx Media electrical Signal Noise Ratio (eSNR) current.

xklChannelMediaSidePMRxESNRMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.9

Rx Media electrical Signal Noise Ratio (eSNR) minimum.

xklChannelMediaSidePMRxESNRMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.10

Rx Media electrical Signal Noise Ratio (eSNR) maximum.

xklChannelMediaSidePMRxESNRAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.11

Rx Media electrical Signal Noise Ratio (eSNR) average.

xklChannelMediaSidePMRxCDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.12

Rx Chromatic Dispersion (CD) current.

xklChannelMediaSidePMRxCDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.13

Rx Chromatic Dispersion (CD) minimum.

xklChannelMediaSidePMRxCDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.14

Rx Chromatic Dispersion (CD) maximum.

xklChannelMediaSidePMRxCDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.15

Rx Chromatic Dispersion (CD) average.

xklChannelMediaSidePMRxDGDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.16

Rx Differential Group Delay (DGD) current.

xklChannelMediaSidePMRxDGDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.17

Rx Differential Group Delay (DGD) minimum.

xklChannelMediaSidePMRxDGDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.18

Rx Differential Group Delay (DGD) maximum.

xklChannelMediaSidePMRxDGDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.19

Rx Differential Group Delay (DGD) average.

xklChannelMediaSidePMRxSOPMDCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.20

Rx Second Order Polarization Mode Dispersion (SOPMD) current.

xklChannelMediaSidePMRxSOPMDMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.21

Rx Second Order Polarization Mode Dispersion (SOPMD) minimum.

xklChannelMediaSidePMRxSOPMDMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.22

Rx Second Order Polarization Mode Dispersion (SOPMD) maximum.

xklChannelMediaSidePMRxSOPMDAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.23

Rx Second Order Polarization Mode Dispersion (SOPMD) average.

xklChannelMediaSidePMRxPDLCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.24

Rx Polarization Dependent Loss (PDL) current.

xklChannelMediaSidePMRxPDLMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.25

Rx Polarization Dependent Loss (PDL) minimum.

xklChannelMediaSidePMRxPDLMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.26

Rx Polarization Dependent Loss (PDL) maximum.

xklChannelMediaSidePMRxPDLAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.27

Rx Polarization Dependent Loss (PDL) average.

xklChannelMediaSidePMRxCFOCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.28

Rx Carrier Frequency Offset (CFO) current.

xklChannelMediaSidePMRxCFOMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.29

Rx Carrier Frequency Offset (CFO) minimum.

xklChannelMediaSidePMRxCFOMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.30

Rx Carrier Frequency Offset (CFO) maximum.

xklChannelMediaSidePMRxCFOAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.31

Rx Carrier Frequency Offset (CFO) average.

xklChannelMediaSidePMRxSOPROCCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.32

Rx State Of Polarization (SOP) Rate Of Change (ROC) current.

xklChannelMediaSidePMRxSOPROCMin

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.33

Rx State Of Polarization (SOP) Rate Of Change (ROC) minimum.

xklChannelMediaSidePMRxSOPROCMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.34

Rx State Of Polarization (SOP) Rate Of Change (ROC) maximum.

xklChannelMediaSidePMRxSOPROCAvg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.35

Rx State Of Polarization (SOP) Rate Of Change (ROC) average.

xklChannelMediaSidePMRxTotalPowerCurrent

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.36

Rx Total Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.37

xklChannelMediaSidePMRxTotalPowerMin

Rx Total Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.38

xklChannelMediaSidePMRxTotalPowerMax

Rx Total Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.39

xklChannelMediaSidePMRxTotalPowerAvg

Rx Total Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.40

xklChannelMediaSidePMRxSignalPowerCurrent

Rx Signal Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.41

xklChannelMediaSidePMRxSignalPowerMin

Rx Signal Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.42

xklChannelMediaSidePMRxSignalPowerMax

Rx Signal Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.43

xklChannelMediaSidePMRxSignalPowerAvg

Rx Signal Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.44

xklChannelMediaSidePMTxOutputPowerCurrent

Tx Output Optical Power current.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.45

xklChannelMediaSidePMTxOutputPowerMin

Tx Output Optical Power minimum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.46

xklChannelMediaSidePMTxOutputPowerMax

Tx Output Optical Power maximum.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.47

xklChannelMediaSidePMTxOutputPowerAvg

Tx Output Optical Power average.

1/100 dBmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.95.1.48

xklChannelHostSideRxBERTable

table

.1.3.6.1.4.1.21150.1.1.97 · 1 row entry · 22 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideRxBERTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideRxBERTable'

Channel host-side Rx BER stats table.

xklChannelHostSideRxBEREntry row .1.3.6.1.4.1.21150.1.1.97.1

Channel host-side Rx BER stats entry.

Indexes

xklChannelHostSideRxBERIndex1 xklChannelHostSideRxBERIndex2

Column Syntax OID

xklChannelHostSideRxBERIndex1

Channel host-side Rx BER stats table index 1.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideRxBERIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.97.1.1

Channel host-side Rx BER stats table index 2.
The index is static-mapped to media lane Id.

xklChannelHostSideRxBERChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.97.1.2

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideRxBERLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.97.1.3

Lane Id.

xklChannelHostSideRxBERChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.97.1.4

Channel status.

xklChannelHostSideRxBERChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.97.1.5

Channel description.

xklChannelHostSideRxBERPreFECCurrentMantissa

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.97.1.6

This object gives the mantissa part of the Media Pre-FEC BER current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideRxBERPreFECCurrentExponent.
Media Pre-FEC BER curre…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.97.1.7

xklChannelHostSideRxBERPreFECCurrentExponent

This object gives the exponent part of the Media Pre-FEC BER current.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideRxBERPreFECCurrentMantissa.
Media Pre-FEC BER current is expre…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.97.1.8

xklChannelHostSideRxBERPreFECMinMantissa

This object gives the mantissa part of the Media Pre-FEC BER minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideRxBERPreFECMinExponent.
Media Pre-FEC BER minimum i…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.97.1.9

xklChannelHostSideRxBERPreFECMinExponent

This object gives the exponent part of the Media Pre-FEC BER minimum.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideRxBERPreFECMinMantissa.
Media Pre-FEC BER minimum is expressed…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.97.1.10

xklChannelHostSideRxBERPreFECMaxMantissa

This object gives the mantissa part of the Media Pre-FEC BER maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideRxBERPreFECMaxExponent.
Media Pre-FEC BER maximum i…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.97.1.11

xklChannelHostSideRxBERPreFECMaxExponent

This object gives the exponent part of the Media Pre-FEC BER maximum.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideRxBERPreFECMaxMantissa.
Media Pre-FEC BER maximum is expressed…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.97.1.12

xklChannelHostSideRxBERPreFECAvgMantissa

This object gives the mantissa part of the Media Pre-FEC BER average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideRxBERPreFECAvgExponent.
Media Pre-FEC BER average i…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.97.1.13

xklChannelHostSideRxBERPreFECAvgExponent

This object gives the exponent part of the Media Pre-FEC BER average.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideRxBERPreFECAvgMantissa.
Media Pre-FEC BER average is expressed…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.97.1.14

xklChannelHostSideRxBERErrFramesCurrentMantissa

This object gives the mantissa part of the Media Err Frames current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideRxBERErrFramesCurrentExponent.
Media Err Frames curr…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.97.1.15

xklChannelHostSideRxBERErrFramesCurrentExponent

This object gives the exponent part of the Media Err Frames current.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideRxBERErrFramesCurrentMantissa.
Media Err Frames current is expr…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.97.1.16

xklChannelHostSideRxBERErrFramesMinMantissa

This object gives the mantissa part of the Media Err Frames minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideRxBERErrFramesMinExponent.
Media Err Frames minimum …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.97.1.17

xklChannelHostSideRxBERErrFramesMinExponent

This object gives the exponent part of the Media Err Frames minimum.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideRxBERErrFramesMinMantissa.
Media Err Frames minimum is expresse…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.97.1.18

xklChannelHostSideRxBERErrFramesMaxMantissa

This object gives the mantissa part of the Media Err Frames maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideRxBERErrFramesMaxExponent.
Media Err Frames maximum …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.97.1.19

xklChannelHostSideRxBERErrFramesMaxExponent

This object gives the exponent part of the Media Err Frames maximum.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideRxBERErrFramesMaxMantissa.
Media Err Frames maximum is expresse…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.97.1.20

xklChannelHostSideRxBERErrFramesAvgMantissa

This object gives the mantissa part of the Media Err Frames average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideRxBERErrFramesAvgExponent.
Media Err Frames average …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.97.1.21

xklChannelHostSideRxBERErrFramesAvgExponent

This object gives the exponent part of the Media Err Frames average.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideRxBERErrFramesAvgMantissa.
Media Err Frames average is expresse…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.97.1.22

xklChannelHostSideTxBERTable

table

.1.3.6.1.4.1.21150.1.1.99 · 1 row entry · 23 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideTxBERTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideTxBERTable'

Channel host-side Tx BER stats table.

xklChannelHostSideTxBEREntry row .1.3.6.1.4.1.21150.1.1.99.1

Channel host-side Tx BER stats entry.

Indexes

xklChannelHostSideTxBERIndex1 xklChannelHostSideTxBERIndex2

Column Syntax OID

xklChannelHostSideTxBERIndex1

Channel host-side Tx BER stats table index 1.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideTxBERIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.99.1.1

Channel host-side Tx BER stats table index 2.
The index is static-mapped to (host group Id + 1).

xklChannelHostSideTxBERChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.99.1.2

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideTxBERGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.99.1.3

Host group Id.

xklChannelHostSideTxBERLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.99.1.4

Lane Id (1,3,5,7).

xklChannelHostSideTxBERChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.99.1.5

Channel status.

xklChannelHostSideTxBERChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.99.1.6

Channel description.

xklChannelHostSideTxBERPreFECCurrentMantissa

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.99.1.7

This object gives the mantissa part of the Host Pre-FEC BER current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideTxBERPreFECCurrentExponent.
Host Pre-FEC BER current…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.99.1.8

xklChannelHostSideTxBERPreFECCurrentExponent

This object gives the exponent part of the Host Pre-FEC BER current.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideTxBERPreFECCurrentMantissa.
Host Pre-FEC BER current is express…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.99.1.9

xklChannelHostSideTxBERPreFECMinMantissa

This object gives the mantissa part of the Host Pre-FEC BER minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideTxBERPreFECMinExponent.
Host Pre-FEC BER minimum is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.99.1.10

xklChannelHostSideTxBERPreFECMinExponent

This object gives the exponent part of the Host Pre-FEC BER minimum.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideTxBERPreFECMinMantissa.
Host Pre-FEC BER minimum is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.99.1.11

xklChannelHostSideTxBERPreFECMaxMantissa

This object gives the mantissa part of the Host Pre-FEC BER maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideTxBERPreFECMaxExponent.
Host Pre-FEC BER maximum is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.99.1.12

xklChannelHostSideTxBERPreFECMaxExponent

This object gives the exponent part of the Host Pre-FEC BER maximum.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideTxBERPreFECMaxMantissa.
Host Pre-FEC BER maximum is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.99.1.13

xklChannelHostSideTxBERPreFECAvgMantissa

This object gives the mantissa part of the Host Pre-FEC BER average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideTxBERPreFECAvgExponent.
Host Pre-FEC BER average is …

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.99.1.14

xklChannelHostSideTxBERPreFECAvgExponent

This object gives the exponent part of the Host Pre-FEC BER average.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideTxBERPreFECAvgMantissa.
Host Pre-FEC BER average is expressed i…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.99.1.15

xklChannelHostSideTxBERErrFramesCurrentMantissa

This object gives the mantissa part of the Host Err Frames current.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideTxBERErrFramesCurrentExponent.
Host Err Frames curren…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.99.1.16

xklChannelHostSideTxBERErrFramesCurrentExponent

This object gives the exponent part of the Host Err Frames current.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideTxBERErrFramesCurrentMantissa.
Host Err Frames current is expres…

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.99.1.17

xklChannelHostSideTxBERErrFramesMinMantissa

This object gives the mantissa part of the Host Err Frames minimum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideTxBERErrFramesMinExponent.
Host Err Frames minimum is…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.99.1.18

xklChannelHostSideTxBERErrFramesMinExponent

This object gives the exponent part of the Host Err Frames minimum.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideTxBERErrFramesMinMantissa.
Host Err Frames minimum is expressed …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.99.1.19

xklChannelHostSideTxBERErrFramesMaxMantissa

This object gives the mantissa part of the Host Err Frames maximum.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideTxBERErrFramesMaxExponent.
Host Err Frames maximum is…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.99.1.20

xklChannelHostSideTxBERErrFramesMaxExponent

This object gives the exponent part of the Host Err Frames maximum.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideTxBERErrFramesMaxMantissa.
Host Err Frames maximum is expressed …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.99.1.21

xklChannelHostSideTxBERErrFramesAvgMantissa

This object gives the mantissa part of the Host Err Frames average.
It is represented in one hundreths of a unit. The exponent part is
defined in xklChannelHostSideTxBERErrFramesAvgExponent.
Host Err Frames average is…

1/100Integer32

Constraints:
range: 0-999

.1.3.6.1.4.1.21150.1.1.99.1.22

xklChannelHostSideTxBERErrFramesAvgExponent

This object gives the exponent part of the Host Err Frames average.
It is represented in powers of 10. The mantissa part is
defined in xklChannelHostSideTxBERErrFramesAvgMantissa.
Host Err Frames average is expressed …

Integer32

Constraints:
range: -30-0

.1.3.6.1.4.1.21150.1.1.99.1.23

xklChannelHostSideRxPMTable

table

.1.3.6.1.4.1.21150.1.1.101 · 1 row entry · 8 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideRxPMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideRxPMTable'

Channel host-side Rx PM counter table.

xklChannelHostSideRxPMEntry row .1.3.6.1.4.1.21150.1.1.101.1

Channel host-side Rx PM counter entry.

Indexes

xklChannelHostSideRxPMIndex

Column Syntax OID

xklChannelHostSideRxPMIndex

Channel host-side Rx PM counter table index.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideRxPMChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.101.1.1

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideRxPMChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.101.1.2

Channel status.

xklChannelHostSideRxPMChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.101.1.3

Channel description.

xklChannelHostSideRxPMRxBits

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.101.1.4

Rx Bits.

xklChannelHostSideRxPMRxCorrectedBits

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.101.1.5

Rx Corrected Bits.

xklChannelHostSideRxPMRxFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.101.1.6

Rx Frames.

xklChannelHostSideRxPMRxFrameUncorrectedErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.101.1.7

Rx Frame Uncorrected Errors.

xklChannelHostSideTxPMIndex1 xklChannelHostSideTxPMIndex2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.101.1.8

xklChannelHostSideTxPMTable

table

.1.3.6.1.4.1.21150.1.1.103 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideTxPMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideTxPMTable'

Channel host-side Tx PM counter table.

xklChannelHostSideTxPMEntry row .1.3.6.1.4.1.21150.1.1.103.1

Channel host-side Tx PM counter entry.

Indexes

Column Syntax OID

xklChannelHostSideTxPMIndex1

Channel host-side Tx PM counter table index.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideTxPMIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.103.1.1

Channel host-side Tx PM counter table index.
The index is static-mapped to (host group Id + 1).

xklChannelHostSideTxPMChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.103.1.2

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideTxPMGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.103.1.3

Host group Id.

xklChannelHostSideTxPMChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.103.1.4

Channel status.

xklChannelHostSideTxPMChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.103.1.5

Channel description.

xklChannelHostSideTxPMTxBits

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.103.1.6

Tx Bits.

xklChannelHostSideTxPMTxCorrectedBits

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.103.1.7

Tx Corrected Bits.

xklChannelHostSideTxPMTxFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.103.1.8

Tx Frames.

xklChannelHostSideTxPMTxFrameUncorrectedErrors

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.103.1.9

Tx Frame Uncorrected Errors.

xklChannelHostSideRxPMSubIntIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.103.1.10

xklChannelHostSideRxPMSubIntTable

table

.1.3.6.1.4.1.21150.1.1.105 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideRxPMSubIntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideRxPMSubIntTable'

Channel host-side Rx PM sub-interval counter table.

xklChannelHostSideRxPMSubIntEntry row .1.3.6.1.4.1.21150.1.1.105.1

Channel host-side Rx PM sub-interval counter entry.

Indexes

Column Syntax OID

xklChannelHostSideRxPMSubIntIndex

Channel host-side Rx PM sub-interval counter table index.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideRxPMSubIntChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.105.1.1

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideRxPMSubIntChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.105.1.2

Channel status.

xklChannelHostSideRxPMSubIntChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.105.1.3

Channel description.

xklChannelHostSideRxPMSubIntRxBitsAvg

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.105.1.4

Rx Bits average.

xklChannelHostSideRxPMSubIntRxCorrectedBitMin

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.105.1.5

Rx Corrected Bits minimum.

xklChannelHostSideRxPMSubIntRxCorrectedBitMax

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.105.1.6

Rx Corrected Bits maximum.

xklChannelHostSideRxPMSubIntRxFramesAvg

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.105.1.7

Rx Frames average.

xklChannelHostSideRxPMSubIntRxFrameUncorrectedMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.105.1.8

Rx Frame Uncorrected minimum.

xklChannelHostSideRxPMSubIntRxFrameUncorrectedMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.105.1.9

Rx Frame Uncorrected maximum.

xklChannelHostSideTxPMSubIntIndex1 xklChannelHostSideTxPMSubIntIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.105.1.10

xklChannelHostSideTxPMSubIntTable

table

.1.3.6.1.4.1.21150.1.1.107 · 1 row entry · 12 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideTxPMSubIntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideTxPMSubIntTable'

Channel host-side Tx PM sub-interval counter table.

xklChannelHostSideTxPMSubIntEntry row .1.3.6.1.4.1.21150.1.1.107.1

Channel host-side Tx PM sub-interval counter entry.

Indexes

Column Syntax OID

xklChannelHostSideTxPMSubIntIndex1

Channel host-side Tx PM sub-interval counter table index.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideTxPMSubIntIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.107.1.1

Channel host-side Tx PM sub-interval counter table index.
The index is static-mapped to (host group Id + 1).

xklChannelHostSideTxPMSubIntChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.107.1.2

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideTxPMSubIntGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.107.1.3

Host group Id.

xklChannelHostSideTxPMSubIntChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.107.1.4

Channel status.

xklChannelHostSideTxPMSubIntChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.107.1.5

Channel description.

xklChannelHostSideTxPMSubIntTxBitsAvg

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.107.1.6

Tx Bits average.

xklChannelHostSideTxPMSubIntTxCorrectedBitMin

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.107.1.7

Tx Corrected Bits minimum.

xklChannelHostSideTxPMSubIntTxCorrectedBitMax

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.107.1.8

Tx Corrected Bits maximum.

xklChannelHostSideTxPMSubIntTxFramesAvg

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.107.1.9

Tx Frames average.

xklChannelHostSideTxPMSubIntTxFrameUncorrectedMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.107.1.10

Tx Frame Uncorrected minimum.

xklChannelHostSideTxPMSubIntTxFrameUncorrectedMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.107.1.11

Tx Frame Uncorrected maximum.

xklChannelHostSideRxPMEthIndex1 xklChannelHostSideRxPMEthIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.107.1.12

xklChannelHostSideRxPMEthTable

table

.1.3.6.1.4.1.21150.1.1.109 · 1 row entry · 34 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideRxPMEthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideRxPMEthTable'

Channel host-side Rx PM ethernet counter table.

xklChannelHostSideRxPMEthEntry row .1.3.6.1.4.1.21150.1.1.109.1

Channel host-side Rx PM ethernet counter entry.

Indexes

Column Syntax OID

xklChannelHostSideRxPMEthIndex1

Channel host-side Rx PM ethernet counter table index 1.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideRxPMEthIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.109.1.1

Channel host-side Rx PM ethernet counter table index 2.
The index is static-mapped to (host group Id + 1).

xklChannelHostSideRxPMEthChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.109.1.2

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideRxPMEthGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.109.1.3

Host group Id.

xklChannelHostSideRxPMEthLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.109.1.4

Host lane Id.

xklChannelHostSideRxPMEthChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.109.1.5

Channel status.

xklChannelHostSideRxPMEthChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.109.1.6

Channel description.

xklChannelHostSideRxPMEthRxUtil

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.109.1.7

Rx Utilization.

xklChannelHostSideRxPMEthRxFrames

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.109.1.8

Rx Frames.

xklChannelHostSideRxPMEthRxBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.9

Rx Bytes.

xklChannelHostSideRxPMEthRxMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.10

Rx Multicast Frames.

xklChannelHostSideRxPMEthRxBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.11

Rx Broadcast Frames.

xklChannelHostSideRxPMEthRx64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.12

Rx 64 Byte Frames.

xklChannelHostSideRxPMEthRx65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.13

Rx 65 to 127 Byte Frames.

xklChannelHostSideRxPMEthRx128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.14

Rx 128 to 255 Byte Frames.

xklChannelHostSideRxPMEthRx256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.15

Rx 256 to 511 Byte Frames.

xklChannelHostSideRxPMEthRx512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.16

Rx 512 to 1023 Byte Frames.

xklChannelHostSideRxPMEthRx1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.17

Rx 1024 to 1518 Byte Frames.

xklChannelHostSideRxPMEthRx1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.18

Rx 1519 to Jumbo Byte Frames.

xklChannelHostSideRxPMEthRxGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.19

Rx >= Jumbo Byte Frames.

xklChannelHostSideRxPMEthRxBadFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.20

Rx Bad Frames.

xklChannelHostSideRxPMEthRxBadBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.21

Rx Bad Bytes.

xklChannelHostSideRxPMEthRxBadMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.22

Rx Bad Multicast Frames.

xklChannelHostSideRxPMEthRxBadBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.23

Rx Bad Broadcast Frames.

xklChannelHostSideRxPMEthRxBadCRCFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.24

Rx Bad CRC Frames.

xklChannelHostSideRxPMEthRxBadLt64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.25

Rx Bad < 64 Byte Frames.

xklChannelHostSideRxPMEthRxBad64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.26

Rx Bad 64 Byte Frames.

xklChannelHostSideRxPMEthRxBad65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.27

Rx Bad 65 to 127 Byte Frames.

xklChannelHostSideRxPMEthRxBad128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.28

Rx Bad 128 to 255 Byte Frames.

xklChannelHostSideRxPMEthRxBad256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.29

Rx Bad 256 to 511 Byte Frames.

xklChannelHostSideRxPMEthRxBad512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.30

Rx Bad 512 to 1023 Byte Frames.

xklChannelHostSideRxPMEthRxBad1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.31

Rx Bad 1024 to 1518 Byte Frames.

xklChannelHostSideRxPMEthRxBad1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.32

Rx Bad 1519 to Jumbo Byte Frames.

xklChannelHostSideRxPMEthRxBadGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.33

Rx Bad >= Jumbo Byte Frames.

xklChannelHostSideTxPMEthIndex1 xklChannelHostSideTxPMEthIndex2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.109.1.34

xklChannelHostSideTxPMEthTable

table

.1.3.6.1.4.1.21150.1.1.111 · 1 row entry · 34 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideTxPMEthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideTxPMEthTable'

Channel host-side Tx PM ethernet counter table.

xklChannelHostSideTxPMEthEntry row .1.3.6.1.4.1.21150.1.1.111.1

Channel host-side Tx PM ethernet counter entry.

Indexes

Column Syntax OID

xklChannelHostSideTxPMEthIndex1

Channel host-side Tx PM ethernet counter table index 1.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideTxPMEthIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.111.1.1

Channel host-side Tx PM ethernet counter table index 2.
The index is static-mapped to (host group Id + 1).

xklChannelHostSideTxPMEthChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.111.1.2

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideTxPMEthGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.111.1.3

Host group Id.

xklChannelHostSideTxPMEthLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.111.1.4

Host lane Id.

xklChannelHostSideTxPMEthChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.111.1.5

Channel status.

xklChannelHostSideTxPMEthChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.111.1.6

Channel description.

xklChannelHostSideTxPMEthTxUtil

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.111.1.7

Tx Utilization.

xklChannelHostSideTxPMEthTxFrames

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.111.1.8

Tx Frames.

xklChannelHostSideTxPMEthTxBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.9

Tx Bytes.

xklChannelHostSideTxPMEthTxMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.10

Tx Multicast Frames.

xklChannelHostSideTxPMEthTxBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.11

Tx Broadcast Frames.

xklChannelHostSideTxPMEthTx64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.12

Tx 64 Byte Frames.

xklChannelHostSideTxPMEthTx65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.13

Tx 65 to 127 Byte Frames.

xklChannelHostSideTxPMEthTx128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.14

Tx 128 to 255 Byte Frames.

xklChannelHostSideTxPMEthTx256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.15

Tx 256 to 511 Byte Frames.

xklChannelHostSideTxPMEthTx512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.16

Tx 512 to 1023 Byte Frames.

xklChannelHostSideTxPMEthTx1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.17

Tx 1024 to 1518 Byte Frames.

xklChannelHostSideTxPMEthTx1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.18

Tx 1519 to Jumbo Byte Frames.

xklChannelHostSideTxPMEthTxGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.19

Tx >= Jumbo Byte Frames.

xklChannelHostSideTxPMEthTxBadFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.20

Tx Bad Frames.

xklChannelHostSideTxPMEthTxBadBytes

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.21

Tx Bad Bytes.

xklChannelHostSideTxPMEthTxBadMulticastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.22

Tx Bad Multicast Frames.

xklChannelHostSideTxPMEthTxBadBroadcastFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.23

Tx Bad Broadcast Frames.

xklChannelHostSideTxPMEthTxBadCRCFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.24

Tx Bad CRC Frames.

xklChannelHostSideTxPMEthTxBadLt64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.25

Tx Bad < 64 Byte Frames.

xklChannelHostSideTxPMEthTxBad64ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.26

Tx Bad 64 Byte Frames.

xklChannelHostSideTxPMEthTxBad65To127ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.27

Tx Bad 65 to 127 Byte Frames.

xklChannelHostSideTxPMEthTxBad128To255ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.28

Tx Bad 128 to 255 Byte Frames.

xklChannelHostSideTxPMEthTxBad256To511ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.29

Tx Bad 256 to 511 Byte Frames.

xklChannelHostSideTxPMEthTxBad512To1023ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.30

Tx Bad 512 to 1023 Byte Frames.

xklChannelHostSideTxPMEthTxBad1024To1518ByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.31

Tx Bad 1024 to 1518 Byte Frames.

xklChannelHostSideTxPMEthTxBad1519ToJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.32

Tx Bad 1519 to Jumbo Byte Frames.

xklChannelHostSideTxPMEthTxBadGeJumboByteFrames

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.33

Tx Bad >= Jumbo Byte Frames.

xklChannelMediaSideTxModIndex

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.21150.1.1.111.1.34

xklChannelMediaSideTxModTable

table

.1.3.6.1.4.1.21150.1.1.113 · 1 row entry · 10 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelMediaSideTxModTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelMediaSideTxModTable'

Channel media-side Tx modulator performance counter table.

xklChannelMediaSideTxModEntry row .1.3.6.1.4.1.21150.1.1.113.1

Channel media-side Tx modulator performance counter entry.

Indexes

Column Syntax OID

xklChannelMediaSideTxModIndex

Channel media-side Tx modulator performance counter table index.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelMediaSideTxModChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.113.1.1

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelMediaSideTxModChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.113.1.2

Channel status.

xklChannelMediaSideTxModChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.113.1.3

Channel description.

xklChannelMediaSideTxModBiasXI

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.113.1.4

Tx Modulator Bias X/I.

xklChannelMediaSideTxModBiasXQ

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.113.1.5

Tx Modulator Bias X/Q.

xklChannelMediaSideTxModBiasYI

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.113.1.6

Tx Modulator Bias Y/I.

xklChannelMediaSideTxModBiasYQ

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.113.1.7

Tx Modulator Bias Y/Q.

xklChannelMediaSideTxModBiasXPhase

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.113.1.8

Tx Modulator Bias X Phase.

xklChannelMediaSideTxModBiasYPhase

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.113.1.9

Tx Modulator Bias Y Phase.

xklChannelHostSideRxPCSAlarmIndex1 xklChannelHostSideRxPCSAlarmIndex2

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21150.1.1.113.1.10

xklChannelHostSideRxPCSAlarmTable

table

.1.3.6.1.4.1.21150.1.1.115 · 1 row entry · 17 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideRxPCSAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideRxPCSAlarmTable'

Channel host-side Rx physical coding sublayer (PCS) alarm table.

xklChannelHostSideRxPCSAlarmEntry row .1.3.6.1.4.1.21150.1.1.115.1

Channel host-side Rx physical coding sublayer (PCS) alarm entry.

Indexes

Column Syntax OID

xklChannelHostSideRxPCSAlarmIndex1

Channel host-side Rx physical coding sublayer (PCS) alarm table index 1.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideRxPCSAlarmIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.115.1.1

Channel host-side Rx physical coding sublayer (PCS) alarm table index 2.
The index is static-mapped to (host group Id + 1).

xklChannelHostSideRxPCSAlarmChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.115.1.2

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideRxPCSAlarmGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.115.1.3

Host group Id.

xklChannelHostSideRxPCSAlarmLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.115.1.4

Host lane Id.

xklChannelHostSideRxPCSAlarmChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.115.1.5

Channel status.

xklChannelHostSideRxPCSAlarmChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.115.1.6

Channel description.

xklChannelHostSideRxPCSAlarmRemoteFault

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.115.1.7

Rx remote fault.

xklChannelHostSideRxPCSAlarmPCSErrorBlocks

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.8

Rx PCS error blocks.

xklChannelHostSideRxPCSAlarmPCSBIPErrors

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.9

Rx PCS BIP errors.

xklChannelHostSideRxPCSAlarmPCSLOSDetect

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.10

Rx PCS LOS.

xklChannelHostSideRxPCSAlarmLocalFault

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.11

Rx local fault.

xklChannelHostSideRxPCSAlarmLOAMarkerLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.12

Rx loss of alignment marker lock.

xklChannelHostSideRxPCSAlarmLossOfAlignment

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.13

Rx loss of alignment.

xklChannelHostSideRxPCSAlarmLossOfBlockLock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.14

Rx loss of block lock.

xklChannelHostSideRxPCSAlarmPCSCFI

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.15

Rx PCS consequent fault insertion.

xklChannelHostSideRxPCSAlarmPCSInvalidBlock

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.16

Rx PCS invalid blocks.

xklChannelHostSideTxPCSAlarmIndex1 xklChannelHostSideTxPCSAlarmIndex2

Type Values:

1	unused
2	yes
3	no

Description:

Represents a physical coding sublayer (PCS) alarm state.

.1.3.6.1.4.1.21150.1.1.115.1.17

xklChannelHostSideTxPCSAlarmTable

table

.1.3.6.1.4.1.21150.1.1.117 · 1 row entry · 17 columns

Open in standard view

Uses the xkl variant from /opt/observium/mibs/xkl.

Command help

Walk xklChannelHostSideTxPCSAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XKL-MIB' -M '/opt/observium/mibs/xkl:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XKL-MIB::xklChannelHostSideTxPCSAlarmTable'

Channel host-side Tx physical coding sublayer (PCS) alarm table.

xklChannelHostSideTxPCSAlarmEntry row .1.3.6.1.4.1.21150.1.1.117.1

Channel host-side Tx physical coding sublayer (PCS) alarm entry.

Indexes

Column Syntax OID

xklChannelHostSideTxPCSAlarmIndex1

Channel host-side Tx physical coding sublayer (PCS) alarm table index 1.
The index is static-mapped to (Channel port + 1), as below:
Index: 1-12: Lower channel 0-11
13-24: Upper channel 0-11

xklChannelHostSideTxPCSAlarmIndex2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.117.1.1

Channel host-side Tx physical coding sublayer (PCS) alarm table index 2.
The index is static-mapped to (host group Id + 1).

xklChannelHostSideTxPCSAlarmChannelPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.117.1.2

Channel port.
The Channel port is static-mapped as below:
0-11: Lower channel 0-11
12-23: Upper channel 0-11

xklChannelHostSideTxPCSAlarmGroupId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.117.1.3

Host group Id.

xklChannelHostSideTxPCSAlarmLaneId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.117.1.4

Host lane Id.

xklChannelHostSideTxPCSAlarmChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.21150.1.1.117.1.5

Channel status.

xklChannelHostSideTxPCSAlarmChannelDescr

Type Values:

1	other
2	notPresent
3	up
4	ioError
5	fault
6	lowPower
7	notReady
9	disabled
10	down
11	alarm
12	warning

Description:

Represents a transceiver module status value.

.1.3.6.1.4.1.21150.1.1.117.1.6

Channel description.

xklChannelHostSideTxPCSAlarmRemoteFault

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21150.1.1.117.1.7

Tx remote fault.