XEROX-PRINTER-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
124

xcmPrtBaseTable

table
.1.3.6.1.4.1.253.8.55.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtBaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtBaseTable' 
A table of general counters and information for ease of use of
the XCMI Extension to IETF Printer MIB Module and the
IETF Printer MIB on this host system.
          
Usage:  The ONLY valid row in the 'xcmPrtBaseTable'
shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1').
xcmPrtBaseEntry row .1.3.6.1.4.1.253.8.55.1.2.1
An entry of general counters and information for ease of use of
the XCMI Extension to IETF Printer MIB Module and the
IETF Printer MIB on this host system.

Usage: The ONLY valid row in the 'xcmPrtBaseTable…
Indexes
Column Syntax OID
xcmPrtBaseIndex
A unique value used by this host system to identify this
conceptual row in the 'xcmPrtBaseTable'.

Usage: The ONLY valid row in the 'xcmPrtBaseTable'
shall ALWAYS have an 'xcmPrtBaseIndex' of one ('1').
XEROX-GENERAL-TCOrdinal32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.253.8.55.1.2.1.1
xcmPrtBaseRowStatus
This object is used to display status of the ONLY valid
conceptual row in the 'xcmPrtBaseTable'.

Usage: 'xcmPrtBaseRowStatus' is 'read-only' because
the ONLY valid conceptual row shall NOT be deleted.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.1.2.1.2
xcmPrtBaseGroupSupport
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported by this management agent implementation (ie, version)
on this host system, specified in a bit-ma…
XEROX-PRINTER-EXT-TCXcmPrtGroupSupport
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.1.2.1.3
xcmPrtBaseUpdateSupport
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported for existing row update (via SNMP Set-Request PDUs)
by this management agent implementation (ie,…
XEROX-PRINTER-EXT-TCXcmPrtGroupSupport
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.1.2.1.4
xcmPrtBaseCreateSupport
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects which are
supported for dynamic row creation (via '...RowStatus')


by this management a…
XEROX-PRINTER-EXT-TCXcmPrtGroupSupport
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.1.2.1.5
xcmPrtBaseIETFMIBGroupSupport
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
which are supported by this management agent
implementation (ie, version) on this host syste…
XEROX-PRINTER-EXT-TCXcmPrtIETFPrintMIBGroupSupport
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.1.2.1.6
xcmPrtBaseIETFMIBUpdateSupport
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
supported for existing row update (via SNMP Set-Request PDUs)
by this management agent imple…
XEROX-PRINTER-EXT-TCXcmPrtIETFPrintMIBGroupSupport
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.1.2.1.7
xcmPrtBaseIETFMIBCreateSupport
The terse conformance statement of ALL mandatory, conditionally
mandatory, and optional module objects in the IETF Printer MIB
supported for dynamic row creation (via '...RowStatus')
by this management agent implementat…
XEROX-PRINTER-EXT-TCXcmPrtIETFPrintMIBGroupSupport
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.1.2.1.8

xcmPrtGeneralTable

table
.1.3.6.1.4.1.253.8.55.5.1 · 1 row entry · 20 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtGeneralTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtGeneralTable' 
A table of general information per printer.
This table augments the prtGeneralTable.
xcmPrtGeneralEntry row .1.3.6.1.4.1.253.8.55.5.1.1
An entry exists in this table for each device entry in the
hostmib device table whose type is printer.
Indexes
No indexes recorded
Column Syntax OID
xcmPrtGeneralRowStatus
Manages the status of this conceptual row in the
xcmPrtGeneralTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.5.1.1.1
xcmPrtGeneralAuxSheetPackage
This object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets at the printer box level.
The value zero shall mean not specified.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.5.1.1.2
xcmPrtGeneralManualFeedTimeout
The duration in seconds after which the printer shall either:

(a) switch to another input subunit, if the value of
prtInputNextIndex is non-zero and prtGeneralAutoSwitch is on
or
(b) abort any job wai…
SecondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.5.1.1.3
xcmPrtGeneralInputAutoSwitch
Indicates the state of the auto input switching feature.
The value notPresent indicates the feature is not currently
supported. Exact behavior of this feature is product specific.
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.4
xcmPrtGeneralOutputAutoSwitch
Indicates the state of the auto output tray switching feature.
The value notPresent indicates the feature is not currently
supported. Exact behavior of this feature is product specific.
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.5
xcmPrtGeneralMediumClassDefault
This object sets the default medium size class for the printer.
This object sets the medium size for printer management
functions such as printing the configuration sheet.

It may affect any media related …
XEROX-PRINTER-EXT-TCXcmPrtMediumClassTyper/w
Type Values:
1other
2unknown
3notSpecified
4northAmerica
5iso
6jis
 .1.3.6.1.4.1.253.8.55.5.1.1.6
xcmPrtGeneralDarknessLevels
This value indicates the maximum number of darkness levels
supported by this printer.
The level settings range from 1 to xcmPrtGeneralDarknessLevels
where 1 represents the lightest level and
xcmPrtGeneralDarknessLevels …
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.5.1.1.7
xcmPrtGeneralDarknessLevelNorm
The normal setting for the darkness printing object.
The value 0 means unspecified.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.5.1.1.8
xcmPrtGeneralDarknessLevelDflt
The default setting for the density printing option.
The value (-2) indicates unknown.
The value (-4) indicates the auto setting.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.5.1.1.9
xcmPrtGeneralHexDumpEnable
This object controls whether the printer is in a special
diagnostic mode wherein all received print data is printed in
hexadecimal format.

Whether a reset or power-cycles turns xcmPrtGeneralHexDumpEnable
…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.10
xcmPrtGeneralStartupPage
Used to enable or disable printing a startup page. If
enabled, a startup page will be printed shortly after
power-up, when the device is ready. Typical startup
pages include test patterns and/or printer configuration
in…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.11
xcmPrtGeneralBannerPage
Used to enable or disable printing banner pages at the
beginning of jobs. This is a master switch which applies
to all jobs, regardless of interpreter.

Usage: Conforming management agents, which ALSO imp…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.12
xcmPrtGeneralTonerLowStop
Indicates the action taken when a low toner condition exists.

'on' indicates that the printer will stop printing when then
toner is low

'off' indicates that printing will continue when the …
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.13
xcmPrtGeneralEndBannerPage
Used to enable or disable printing banner pages at the
end of jobs. This is a master switch which applies
to all jobs, regardless of interpreter.
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.14
xcmPrtGeneralTrayLowWarning
Indicates the action taken when a input tray paper condition
'on' indicates that the printer will report the warning over
the user interfaces: Control Panel, CWIS, SNMP, etc.
'off' indicates that printing will not …
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.15
xcmPrtGeneralScanlineCompaction
This object enables a printing mode wherein the printer
compresses selected scanlines of raster image data as they are
received and holds them in compressed form until they are to
be printed. This allows particular job…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.50
xcmPrtGeneralMonoPrintOptimization
This object enables a printing mode wherein the printer
can be set to either one of two modes overall.
Mode 1 is Optimized for Speed,
Mode 2 is Optimized for Economy.
This setting affects the overall performance of the…
XEROX-PRINTER-EXT-TCXcmPrtGeneralMonoPrintOptr/w
Type Values:
1other
3optimizeForSpeed
4optimizeForEconomy
5notPresent
 .1.3.6.1.4.1.253.8.55.5.1.1.51
xcmPrtGeneralInstalledFeeder
This object uniquely specifies the currently installed Feeder
hardware. Its purpose is to allow clients to determine via a
single MIB object the number and type of input trays and feeding
options available, based excl…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.5.1.1.70
xcmPrtGeneralInstalledFinisher
This object uniquely specifies the currently installed Finisher
hardware. Its purpose is to allow clients to determine via a
single MIB object the number and type of output trays and
finishing options available, base…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.5.1.1.71
xcmPrtGeneralInstalledAnalogFax
This object uniquely specifies the currently installed analog
fax card. Its purpose is to allow clients to determine via a
single MIB object whether an analog fax card is installed, and
the options that are available…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.5.1.1.72

xcmPrtInputTable

table
.1.3.6.1.4.1.253.8.55.8.1 · 1 row entry · 6 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtInputTable' 
This table logically augments the Printer MIB's prtInputTable.
xcmPrtInputEntry row .1.3.6.1.4.1.253.8.55.8.1.1
Entries may exist for each entry in the prtInputTable.
Indexes
No indexes recorded
Column Syntax OID
xcmPrtInputRowStatus
Manages the status of this conceptual row
in the xcmPrtInputTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.8.1.1.1
xcmPrtInputNextPrtInputIndex
The value of prtInputIndex corresponding to the input subunit
which will be used when this input subunit is emptied.

The value of zero indicates that auto input switching will not
occur when this input su…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.8.1.1.2
xcmPrtInputUseCustomSize
Specifies how this input subunit determines the paper size to
use.

If the value is 'Off' this input subunit uses the paper size
automatically sensed by the subunit.

If the value is 'On' thi…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.8.1.1.3
xcmPrtInputCustDimFeedDirDecl
Provides the dimension, in the feed direction, of the media in
this input subunit, when the value of xcmPrtInputUseCustomSize
is set to 'On'.

When xcmPrtInputUseCustomSize is set to On, this value is copi…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.8.1.1.4
xcmPrtInputCustDimXFeedDirDecl
Provides the dimension, in the feed direction, of the media in
this input subunit, when the value of xcmPrtInputUseCustomSize
is set to 'On'.

When xcmPrtInputUseCustomSize is set to 'On', this value is
co…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.8.1.1.5
xcmPrtInputTrayPriority
The current priority of this tray. This value/mechanism
is independent of xcmPrtNextPrtInputIndex and
xcmPrtInputAliasGroup.

Usage: The priority of this device, where '0' is
unspecified (default), '1' i…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.8.1.1.6

xcmPrtInputTrayTable

table
.1.3.6.1.4.1.253.8.55.8.2 · 1 row entry · 3 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtInputTrayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtInputTrayTable' 
This table logically augments the Printer MIB's Input Group.
xcmPrtInputTrayEntry row .1.3.6.1.4.1.253.8.55.8.2.1
Entries may exist for each unique hrDeviceIndex entry in the
prtInputTable.
Indexes
Column Syntax OID
xcmPrtInputTraysRowStatus
Manages the status of this conceptual row
in the xcmPrtInputTrayTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.8.2.1.1
xcmPrtInputTraysInstalled
The number of printer input trays installed on this device. This
is read-only on devices that are able to determine this value at
The value is read-write on devices that do not know how many inpu
trays are installed o…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.8.2.1.2
xcmPrtInputTraysConfiguration
This single object represents the input tray configuration
for the entire machine. The value exposed by this object
will be utilized by Xerox print driver software and the
Microsoft OS.
XEROX-PRINTER-EXT-TCXcmPrtInputTraysConfiguration
Type Values:
0undefined
1oneTray
2twoTrays
3threeTrays
4fourTrays
5fiveTrays
6sixTrays
7threeTraysAndOneHCF
8fourTraysAndOneHCF
9fiveTraysAndOneHCF
10threeTraysAndOneBypass
11fourTraysAndOneBypass
12fiveTraysAndOneBypass
13threeTraysAndOneBypassAndOneHCF
14fourTraysAndOneBypassAndOneHCF
15fiveTraysAndOneBypassAndOneHCF
16oneFeederWithTwoTrays
17twoFeedersWithFourTrays
18oneFeederWithFourTrays
19twoFeedersWithEightTrays
 .1.3.6.1.4.1.253.8.55.8.2.1.3

xcmPrtOutputTable

table
.1.3.6.1.4.1.253.8.55.9.1 · 1 row entry · 14 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtOutputTable' 
This table logically augments the prtOutputTable in the
Printer MIB.
xcmPrtOutputEntry row .1.3.6.1.4.1.253.8.55.9.1.1
Entries may exist for each entry in the prtOutputTable.
Indexes
No indexes recorded
Column Syntax OID
xcmPrtOutputRowStatus
Manages the status of this conceptual row in the
xcmPrtOutputTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.9.1.1.1
xcmPrtOutputNextIndex
The value of prtOutputIndex corresponding to the output subunit
which will be used when this output subunit is filled.
A value of zero(0) indicates that auto output switching will not


occur…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.9.1.1.2
xcmPrtOutputPassword
This object is used as the password for an Output Tray, e.g. an
output mailbox. It is the value that must be entered to open
the output tray.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.9.1.1.3
xcmPrtOutputOffsetStackingType
This object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB.
XEROX-PRINTER-EXT-TCXcmPrtOutputOffsetStackingTyper/w
Type Values:
1other
2unknown
3notSpecified
4noOffset
5offsetOnJob
6offsetOnJobandCopy
 .1.3.6.1.4.1.253.8.55.9.1.1.4
xcmPrtOutputTrayTimeoutSupport
Determines whether the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.

'On' indicates that would should wait as speci…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.9.1.1.5
xcmPrtOutputTrayTimeout
Determines how long the printer should wait before sending
the printed output to another output destination when the
selected or default destination is full.

A value of (0) implies 'other' or 'infinite' …
SecondsXEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.9.1.1.6
xcmPrtOutputStaple
This object declares whether the printer has the ability to
staple multi-page documents delivered to the specified output
destination, and whether this ability is currently turned on.

'on' indicates stapl…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.9.1.1.100
xcmPrtOutputStaplePosSupported
This object declares the stapling positions supported.
XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePositionr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.253.8.55.9.1.1.101
xcmPrtOutputStapleDefault
This object declares for the cases where the job-stream does not
specify whether to staple a particular job, whether the printer
should apply the default staple specified in
xcmPrtOutputStaplePosDefault for this output …
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.9.1.1.102
xcmPrtOutputStaplePosDefault
This object controls the default staple position to be used
when stapling is enabled, and the job-stream does not specify
whether to staple the particular job or the job-stream
specifies to apply a staple, but does not …
XEROX-PRINTER-EXT-TCXcmPrtOutputStaplePositionr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.253.8.55.9.1.1.103
xcmPrtOutputPunch
This object declares whether the printer has the ability to
punch holes in documents delivered to the specified output
destination, and whether this ability is currently turned on.

'on' indicates hole pun…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.9.1.1.104
xcmPrtOutputPunchDefault
This object declares whether the printer will punch the job
when the print stream does not specify a punch requirement.

'on' indicates hole punching is supported to this output
destination and that the jo…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.9.1.1.105
xcmPrtOutputPunchPosSupported
This object declares the punch positions supported.
XEROX-PRINTER-EXT-TCXcmPrtOutputPunchPositionr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.253.8.55.9.1.1.106
xcmPrtOutputBookletFoldStaple
This object declares whether the device has the ability to
fold and or staple booklet documents delivered to the specifie
output destination, and whether this ability is currently turn

on indicates bookl…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.9.1.1.107

xcmPrtChannelTable

table
.1.3.6.1.4.1.253.8.55.14.1 · 1 row entry · 8 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtChannelTable' 
This table logically augments Printer MIB's prtChannelTable.
xcmPrtChannelEntry row .1.3.6.1.4.1.253.8.55.14.1.1
An entry exists corresponding to each entry in the
prtChannelTable.
Indexes
No indexes recorded
Column Syntax OID
xcmPrtChannelRowStatus
Manages the status of this conceptual row in the
xcmPrtChannelTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.14.1.1.1
xcmPrtChannelEOJTimeout
Defines the number of seconds that the channel waits before
timing out. For example, this may be used for the parallel
channel.

The value zero means infinite or no timeout on the channel.
SecondsXEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.14.1.1.2
xcmPrtChannelAuxSheetPackage
This object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of


auxiliary sheets by this channel.

The value zero shall mean not sp…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.14.1.1.3
xcmPrtChannelSpoolingEnable
This object controls spooling to a large data store such as a
hard disk.

When set to On, data received and waiting to be processed from
any port is spooled onto the large data store and later
retrieved fo…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.14.1.1.4
xcmPrtChannelLangSensing
This object indicates whether the channel supports detection of
the input PDL language type, and if so, whether the feature is
enabled.

Currently, the prtChannelDefaultPageDescLangIndex points to the
Page…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.14.1.1.5
xcmPrtChannelBinaryPostScript
If 'On' PostScript received over this channel is
processed as pure binary data.

If 'Off' PostScript is interpretted as ASCII or TBCP data.

The value 'other' shall mean not specified.
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.14.1.1.6
xcmPrtChannelAutoJobEnd
Controls automatic ending of a print job that does not finish
printing.

When 'On', after the current print job has paused long enough
to exceed the xcmPrtChannelEOJTimeout interval,
the current print job …
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.14.1.1.80
xcmPrtChannelBinaryPostScriptZ
If 'On' PostScript received over this channel is
processed as pure binary data.

If 'Off' PostScript is interpretted as ASCII or TBCP data.

The value 'other' shall mean not specified.
…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.14.1.1.81

xcmPrtInterpreterTable

table
.1.3.6.1.4.1.253.8.55.15.1 · 1 row entry · 39 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtInterpreterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtInterpreterTable' 
This table logically augments the Printer MIB's
prtInterpreterTable.
xcmPrtInterpreterEntry row .1.3.6.1.4.1.253.8.55.15.1.1
An entry exists corresponding to each entry in the
prtInterpreterTable.
Indexes
No indexes recorded
Column Syntax OID
xcmPrtInterpRowStatus
Manages the status of this conceptual row in the
xcmPrtInterpreterTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.15.1.1.1
xcmPrtInterpAuxSheetPackage
This object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets by this interpreter.

The value zero shall mean not specified.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.2
xcmPrtInterpContextSaving
Enables reserving memory for saving permanently downloaded fonts
and macros, when the printer switches between this and another
interpreter. The effect is to save the memory for a subsequent
job using this interpreter.…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.3
xcmPrtInterpEdgeEnhancement
Specifies whether the printer should perform EdgeEnhancement of
the image of the printed document for this interpreter.

The value 'other' shall mean not specified.
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.4
xcmPrtInterpFontIndexDefault
The value of xcmFontIndex corresponding to the xcmFontEntry
which represents the default font for this Interpreter.

A value of (-1) means 'other'.
A value of (-2) means 'unknown'.
A value of (-3) means 'n…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.5
xcmPrtInterpGrayLevels
This object describes the gray levels supported by this
interpreter. This may represent gray levels within a color
plane.
The value zero means not specified for this interpreter.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.6
xcmPrtInterpGrayLevelDefault
This object controls the number of gray scales for this
interpreter.
The value zero means not specified for this interpreter.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.7
xcmPrtInterpJamRecovery
This object controls how the printer recovers from a paper jam.

When set to On, the printer reprints any pages in the printer at
the time of the jam, after the jam has been cleared. The
printer does this…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.8
xcmPrtInterpJobCopiesDefault
This defines the default number of job copies to be printed
by this interpreter.

If set incorrectly, this object may cause difficulties at
customer sites. Agent developers should consider making this
obj…
XEROX-GENERAL-TCOrdinal32r/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.9
xcmPrtInterpLineWrap
This object controls whether long lines are wrapped or
truncated.

If On, long lines wrap to the next line.
If Off, long lines are truncated.

Note the meaning of 'long' depends on the orien…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.10
xcmPrtInterpMediumSizeDefault
This object specifies the default medium size for an
interpreter. It is used if no medium size is specified.

For PCL, this object sets the General PJL Environment variable
'Paper'.

The xcm…
XEROX-PRINTER-EXT-TCXcmPrtMediumSizer/w
Type Values:
1other
2unknown
3notSpecified
10mediumSize13x18
1000naLetter
1001naLegal
1002na10x13Envelope
1003na9x12Envelope
1004naNumber10Envelope
1005na7x9Envelope
1006na9x11Envelope
1007na10x14Envelope
1008naNumber9Envelope
1009na6x9Envelope
1010na10x15Envelope
1011a
1012b
1013c
1014d
1015e
1016monarchEnvelope
1020isoA0
1021isoA1
1022isoA2
1023isoA3
1024isoA4
1025isoA5
1026isoA6
1027isoA7
1028isoA8
1029isoA9
1030isoA10
1040isoB0
1041isoB1
1042isoB2
1043isoB3
1044isoB4
1045isoB5
1046isoB6
1047isoB7
1048isoB8
1049isoB9
1050isoB10
1063isoC3
1064isoC4
1065isoC5
1066isoC6
1067isoDesignatedLong
1080jisB0
1081jisB1
1082jisB2
1083jisB3
1084jisB4
1085jisB5
1086jisB6
1087jisB7
1088jisB8
1089jisB9
1090jisB10
1100executive
1101folio
1102invoice
1103ledger
1104quarto
 .1.3.6.1.4.1.253.8.55.15.1.1.11
xcmPrtInterpPageProtect
This object enables reserving sufficient memory for printing
complex pages, thus avoiding Page Too Complex errors.
The amount of memory reserved is implementation specific.
When this feature is turned on, printer perfor…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.12
xcmPrtInterpPageProtectSize
This object sets the PageSize to be used by this interpreter
in reserving sufficient memory for printing complex pages,
thus avoiding Page Too Complex Errors.
The actual amount of memory to be reserved as a function of …
XEROX-PRINTER-EXT-TCXcmPrtMediumSizer/w
Type Values:
1other
2unknown
3notSpecified
10mediumSize13x18
1000naLetter
1001naLegal
1002na10x13Envelope
1003na9x12Envelope
1004naNumber10Envelope
1005na7x9Envelope
1006na9x11Envelope
1007na10x14Envelope
1008naNumber9Envelope
1009na6x9Envelope
1010na10x15Envelope
1011a
1012b
1013c
1014d
1015e
1016monarchEnvelope
1020isoA0
1021isoA1
1022isoA2
1023isoA3
1024isoA4
1025isoA5
1026isoA6
1027isoA7
1028isoA8
1029isoA9
1030isoA10
1040isoB0
1041isoB1
1042isoB2
1043isoB3
1044isoB4
1045isoB5
1046isoB6
1047isoB7
1048isoB8
1049isoB9
1050isoB10
1063isoC3
1064isoC4
1065isoC5
1066isoC6
1067isoDesignatedLong
1080jisB0
1081jisB1
1082jisB2
1083jisB3
1084jisB4
1085jisB5
1086jisB6
1087jisB7
1088jisB8
1089jisB9
1090jisB10
1100executive
1101folio
1102invoice
1103ledger
1104quarto
 .1.3.6.1.4.1.253.8.55.15.1.1.13
xcmPrtInterpPageSizeErrorPolicy
Controls interpreter behavior when the requested Page Size
is not currently available.
XEROX-PRINTER-EXT-TCXcmPrtPageSizeErrorPolicyr/w
Type Values:
1other
2unknown
3notSpecified
4abortJob
5ignore
6interactWithOperator
7useNearestAndAdjust
8useNextLargerAndAdjust
9useNearest
10useNextLarger
11ignoreAfterTimeout
 .1.3.6.1.4.1.253.8.55.15.1.1.14
xcmPrtInterpPlexSupported
This object specifies the Plex modes supported by this
interpreter. These Plex modes specify the relative
orientations between consecutive pages, and capabilities of
printing one-side, two-sided or both.
XEROX-PRINTER-EXT-TCXcmPrtPlexr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.253.8.55.15.1.1.15
xcmPrtInterpPlexDefault
This object specifies the default plex for this interpreter.

The device shall set no more than one bit.
The value zero shall indicate not specified.
XEROX-PRINTER-EXT-TCXcmPrtPlexr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.253.8.55.15.1.1.16
xcmPrtInterpPrintEdgeToEdge
Enables edge to edge printing for interpreters that try to
enforce a coordinate system that is offset from the edge of the
paper, e.g., PCL.
When On, jobs are printed to the edge of the paper.
When Off, jobs are printe…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.17
xcmPrtInterpPrintQuality
Sets the default output quality of the printed document for this
interpreter. Some printers have programmatically controlled
output quality.
XEROX-PRINTER-EXT-TCXcmPrtPrintQualityr/w
Type Values:
1other
2unknown
3notSpecified
4draft
5normal
6high
 .1.3.6.1.4.1.253.8.55.15.1.1.18
xcmPrtInterpPrtInputIndexDflt
Sets the default input source for the interpreter.
It is the index to the prtInputGroup.
The value zero means not specified.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.19
xcmPrtInterpPrtOutputIndexDflt
The value of the index of the default Output bin for this
interpreter. If specified, this object overrides the box level
object prtOutputDefaultIndex.

The value zero means unspecified.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.20
xcmPrtInterpResFeedDirDefault
This object specifies for this interpreter, the default
resolution in the Feed direction in 10000 units of measure
specified by prtMarkerAddressabilityUnit for this interpreter.

A related object is the Pr…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.21
xcmPrtInterpResXFeedDirDefault
This object specifies for this interpreter, the default
resolution in the Cross Feed direction in 10000 units of measure
specified by prtMarkerAddressabilityUnit for this interpreter.

A related object is …
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.22
xcmPrtInterpResIPResIndex
This object shall provide an index into the xcmIPResTable.
The xcmIPResTable shall be used to list available resolutions
supported by this interpreter. Each row includes objects
for Feed Resolution (pixels per inch), X…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.23
xcmPrtInterpResIPResIndexDflt
This object which is a pointer into the xcmIPResTable sets the
print resolution for this interpreter.

The value zero means unspecified.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.24
xcmPrtInterpTextFormLength
This object sets the maximum number of lines per page for a text
file that is being printed using this interpreter.

For PCL Interpreters, this object provides the General PJL
Environment Variable FORMLINE…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.25
xcmPrtInterpTimeoutJob
This object sets how long printer will wait for correct end of
job from the interpreter.
This setting lets you adjust how long the printer will wait to
receive the data it needs to complete a job before terminating
it p…
SecondsXEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.26
xcmPrtInterpTimeoutPage
This object sets how long printer will wait for correct end of
page from the interpreter.
If, for example, a print job contains a page without the correct
end of page code, the job will stall. This setting lets you
adj…
SecondsXEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.27
xcmPrtInterpInputAliasIndexDflt
Sets the default input tray alias for this interpreter.
It is the xcmPrtInputAliasIndex to the xcmPrtInputAlias table.

The value zero means 'not specified'.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.28
xcmPrtInterpTraySwitch
This object declares for this interpreter the tray switching
declaration mechanism used.

Note: The tray switching declaration mechanisms do not specify
how or when or whether a printer switches back to us…
XEROX-PRINTER-EXT-TCXcmPrtTraySwitchr/w
Type Values:
1other
2unknown
3notSpecified
4off
5useXcmPrtInputNextPrtInputIndex
6useXcmPrtInputAliasTable
 .1.3.6.1.4.1.253.8.55.15.1.1.29
xcmPrtInterpMediumTypeDefault
Specifies the paper type used to print a page if no paper
type is specified by the software application

Typical paper types could include Plain, Preprinted, etc.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.15.1.1.30
xcmPrtInterpMediaTypeErrPolicy
Controls interpreter behavior when the requested Media Type
is not currently available.
XEROX-PRINTER-EXT-TCXcmPrtMediaTypeErrorPolicyr/w
Type Values:
1other
2unknown
3notSpecified
4abortJob
5ignore
6interactWithOperator
11ignoreAfterTimeout
 .1.3.6.1.4.1.253.8.55.15.1.1.31
xcmPrtInterpErrorPolicyTimeout
Provides the timeout for ErrorPolicy enumerations
requiring one, e.g. 'ignoreAfterTimeout'

The value zero shall mean infinite or not supported.
SecondsXEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.15.1.1.32
xcmPrtInterpLineTerm
Enables adding a Carriage Return after every Line Feed.

The value 'On' indicates that a Carriage Return will be
added after every Line Feed.

Usage example: This is a useful feature when p…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.33
xcmPrtInterpEnhancedResolution
This value determines whether the value of
prtMarkerAddressabilityFeedDir and
prtMarkerAddressabilityXFeedDir is generated directly or
generated by enhancing a lower resolution
via interpolation techniques.
…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.34
xcmPrtInterpAutoContinue
This object controls whether the printer resumes printing after
a system error occurs.

When set to Off, the printer does not automatically resume.
Manual intervention must occur for the printer to resume.…
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.50
xcmPrtInterpEnvFeederSize
This object informs the printer what size of envelope is
currently loaded in the envelope feeder. Because the input tray
feeding envelopes may not have a size sensor, this setting is
required so that the printer is abl…
XEROX-PRINTER-EXT-TCXcmPrtMediumSizer/w
Type Values:
1other
2unknown
3notSpecified
10mediumSize13x18
1000naLetter
1001naLegal
1002na10x13Envelope
1003na9x12Envelope
1004naNumber10Envelope
1005na7x9Envelope
1006na9x11Envelope
1007na10x14Envelope
1008naNumber9Envelope
1009na6x9Envelope
1010na10x15Envelope
1011a
1012b
1013c
1014d
1015e
1016monarchEnvelope
1020isoA0
1021isoA1
1022isoA2
1023isoA3
1024isoA4
1025isoA5
1026isoA6
1027isoA7
1028isoA8
1029isoA9
1030isoA10
1040isoB0
1041isoB1
1042isoB2
1043isoB3
1044isoB4
1045isoB5
1046isoB6
1047isoB7
1048isoB8
1049isoB9
1050isoB10
1063isoC3
1064isoC4
1065isoC5
1066isoC6
1067isoDesignatedLong
1080jisB0
1081jisB1
1082jisB2
1083jisB3
1084jisB4
1085jisB5
1086jisB6
1087jisB7
1088jisB8
1089jisB9
1090jisB10
1100executive
1101folio
1102invoice
1103ledger
1104quarto
 .1.3.6.1.4.1.253.8.55.15.1.1.51
xcmPrtInterpManualFeedPgSize
This object sets the default medium size of the manual input
tray for this interpreter.
XEROX-PRINTER-EXT-TCXcmPrtMediumSizer/w
Type Values:
1other
2unknown
3notSpecified
10mediumSize13x18
1000naLetter
1001naLegal
1002na10x13Envelope
1003na9x12Envelope
1004naNumber10Envelope
1005na7x9Envelope
1006na9x11Envelope
1007na10x14Envelope
1008naNumber9Envelope
1009na6x9Envelope
1010na10x15Envelope
1011a
1012b
1013c
1014d
1015e
1016monarchEnvelope
1020isoA0
1021isoA1
1022isoA2
1023isoA3
1024isoA4
1025isoA5
1026isoA6
1027isoA7
1028isoA8
1029isoA9
1030isoA10
1040isoB0
1041isoB1
1042isoB2
1043isoB3
1044isoB4
1045isoB5
1046isoB6
1047isoB7
1048isoB8
1049isoB9
1050isoB10
1063isoC3
1064isoC4
1065isoC5
1066isoC6
1067isoDesignatedLong
1080jisB0
1081jisB1
1082jisB2
1083jisB3
1084jisB4
1085jisB5
1086jisB6
1087jisB7
1088jisB8
1089jisB9
1090jisB10
1100executive
1101folio
1102invoice
1103ledger
1104quarto
 .1.3.6.1.4.1.253.8.55.15.1.1.52
xcmPrtInterpOffsetStackingType
This object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB.

Printers who need to specify OffsetStackingType by
interpreter shall s…
XEROX-PRINTER-EXT-TCXcmPrtOutputOffsetStackingTyper/w
Type Values:
1other
2unknown
3notSpecified
4noOffset
5offsetOnJob
6offsetOnJobandCopy
 .1.3.6.1.4.1.253.8.55.15.1.1.53
xcmPrtInterpProcessBarcodes
Specifies whether the 'extra' barcode processing within
the interpreter should be used.
Printer-MIBPresentOnOffr/w
Type Values:
1other
3on
4off
5notPresent
 .1.3.6.1.4.1.253.8.55.15.1.1.54

xcmPrtInputAliasTable

table
.1.3.6.1.4.1.253.8.55.50.1 · 1 row entry · 4 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtInputAliasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtInputAliasTable' 
This table defines one or more aliases for input sub-units
defined in the Input Group.
xcmPrtInputAliasEntry row .1.3.6.1.4.1.253.8.55.50.1.1
One or more entries may exist corresponding to each entry
in the prtInputTable.
Indexes
Column Syntax OID
xcmPrtInputAliasIndex
A unique value used to identify this row in the
xcmPrtInputAliasTable.
XEROX-GENERAL-TCCardinal32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.50.1.1.1
xcmPrtInputAliasRowStatus
Manages the status of this conceptual row in the
xcmPrtInputAliasTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.50.1.1.2
xcmPrtInputAliasName
Defines an alternate name for the input source. This is in
addition to the prtInputName from the Input Group. Typical
usage is to map an interpreter specific name to the sub-unit
name in the Input Group, e.g., PCL's '…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.253.8.55.50.1.1.3
xcmPrtInputAliasSwitchProgram
The input tray switching program for this 'InputAliasName'
presented in a '.' separated list of prtInputIndex values.
For example, the string '1.4.3' indicates start with the
input tray represented by prtInputIndex 1, i…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.50.1.1.4

xcmPrtAuxPackageTable

table
.1.3.6.1.4.1.253.8.55.60.1 · 1 row entry · 6 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtAuxPackageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtAuxPackageTable' 
This table lists Auxiliary Sheets enabled for this printer.
xcmPrtAuxPackageEntry row .1.3.6.1.4.1.253.8.55.60.1.1
An entry exists corresponding to each entry in the
xcmPrtAuxPackageTable.
Indexes
Column Syntax OID
xcmPrtAuxPackageIndex
A unique value used by the printer to identify this
Auxiliary Sheet.
XEROX-GENERAL-TCCardinal32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.60.1.1.1
xcmPrtAuxPackageRowStatus
Manages the status of this conceptual row in the
xcmPrtAuxPackageTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.60.1.1.2
xcmPrtAuxPackageType
Specifies the Auxiliary Sheet type associated with this row.

Note: DEFVAL commented out due to the negative enum
definition in 15prtxtc being illegal in strict SMIv1
(see section 3.2.1.1 of RFC 1155).
XEROX-PRINTER-EXT-TCXcmPrtAuxSheetTyper/w
Type Values:
-3notSpecified
-2unknown
-1other
1jobSetStart
2jobSetEnd
101printerStartupSheet
102jobErrorSheet
 .1.3.6.1.4.1.253.8.55.60.1.1.3
xcmPrtAuxPackageContent
Specifies the information content of this auxiliary sheet.

The value zero shall mean notSpecified.
XEROX-PRINTER-EXT-TCXcmPrtAuxSheetContentr/w
Type Values:
1other
2unknown
3notSpecified
5concise
6verbose
 .1.3.6.1.4.1.253.8.55.60.1.1.4
xcmPrtAuxPackagePrtInputIndex
Specifies the input tray the printer shall use in
printing this auxiliary sheet.

The value zero shall mean notSpecified.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.60.1.1.5
xcmPrtAuxPackageNext
Provides the index of the next Auxiliary Sheet
declared for this printer. This provides a linking
mechanism to group auxiliary pages. The last
auxiliary page to be declared will set this
xcmPrtAuxPackageNext object to…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.60.1.1.6

xcmPrtInterpPCLTable

table
.1.3.6.1.4.1.253.8.55.70.1 · 1 row entry · 8 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtInterpPCLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtInterpPCLTable' 
This table is an extension to the prtInterpPCLTable.
xcmPrtInterpPCLEntry row .1.3.6.1.4.1.253.8.55.70.1.1
An entry exists corresponding to each entry in the
xcmPrtInterpPCLTable.
Indexes
Column Syntax OID
xcmPrtInterpPCLRowStatus
Manages the status of this conceptual row in the
xcmPrtInterpPCLTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.70.1.1.1
xcmPrtInterpPCLFontSourceDflt
This object provides the PCL-specific PJL variable 'FONTSOURCE'.

'FONTSOURCE' specifies the device location of the default font
in PCL.
XEROX-PRINTER-EXT-TCXcmPrtPCLFontSourcer/w
Type Values:
1other
2unknown
3notSpecified
20internal
41romSimm1
42romSimm2
43romSimm3
44romSimm4
45romSimm5
46romSimm6
47romSimm7
48romSimm8
49romSimm9
61cartridge1
62cartridge2
63cartridge3
64cartridge4
65cartridge5
66cartridge6
67cartridge7
68cartridge8
69cartridge9
80permanentSoft
 .1.3.6.1.4.1.253.8.55.70.1.1.2
xcmPrtInterpPCLFontNumberDflt
This object provides the PCL-specific PJL variable 'FONTNUMBER'.

In PCL, 'FONTNUMBER' specifies the ID of the default font within
the default FONTSOURCE.
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.70.1.1.3
xcmPrtInterpPCLPitchNumerator
This object along with xcmPrtInterpPCLPitchDenominator sets
the default for the PCL-specific PJL variable 'PITCH.

These two object sets the default pitch size for the PCL default
font defined in xcmPrtI…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.70.1.1.4
xcmPrtInterpPCLPitchDenominator
This object along with xcmPrtInterpPCLPitchNumerator sets
the default for the PCL-specific PJL variable 'PITCH'.

These two object sets the default pitch size for the PCL default
font defined in xcmPrtInt…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.70.1.1.5
xcmPrtInterpPCLPtSizeNumerator
This object along with xcmPrtInterpPCLPtSizeDenominatr sets the
default for the PCL-specific PJL variable 'PTSIZE'.

The PTSIZE variable only applies when the FONTNUMBER setting

…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.70.1.1.6
xcmPrtInterpPCLPtSizeDenominatr
This object along with xcmPrtInterpPCLPtSizeNumerator sets the
default for the PCL-specific PJL variable 'PTSIZE'.

The PTSIZE variable only applies when the FONTNUMBER setting
specifies a scalable proport…
XEROX-GENERAL-TCCardinal32r/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.253.8.55.70.1.1.7
xcmPrtInterpPCLPrintScreen
This object sets a special mode for 80 character screen dumps.
XEROX-PRINTER-EXT-TCXcmPrtPrintScreenr/w
Type Values:
1other
2unknown
3notSpecified
4off
5mode850
6mode852
 .1.3.6.1.4.1.253.8.55.70.1.1.50

xcmPrtMedmTypeSupTable

table
.1.3.6.1.4.1.253.8.55.75.2 · 1 row entry · 8 columns
Open in standard view
Uses the xerox variant from /opt/observium/mibs/xerox.
Command help
Walk xcmPrtMedmTypeSupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-PRINTER-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-PRINTER-EXT-MIB::xcmPrtMedmTypeSupTable' 
A table of specific and general medium 'types' which are
associated with this host system.
xcmPrtMedmTypeSupEntry row .1.3.6.1.4.1.253.8.55.75.2.1
An entry for a specific or general medium 'types' which
is associated with this host system.
Indexes
Column Syntax OID
xcmPrtMedmTypeSupIndex
A unique value used to identify this medium type supported.
XEROX-GENERAL-TCOrdinal32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.253.8.55.75.2.1.1
xcmPrtMedmTypeSupRowStatus
Manages the status of this conceptual row in the
'xcmPrtMedmTypeSupTable'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.253.8.55.75.2.1.2
xcmPrtMedmTypeSupRowPersistence
Indicates persistence of this row, from the given enumeration.
XEROX-GENERAL-TCXcmGenRowPersistencer/w
Type Values:
1other
2unknown
3volatile
4nonvolatile
5permanent
6readonly
 .1.3.6.1.4.1.253.8.55.75.2.1.3
xcmPrtMedmTypeSupName
Named 'type' of this medium instance. This can be the name of
the media type provided by a user.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.75.2.1.4
xcmPrtMedmTypeSupFuserTemp
Indicates the relative fuser temperature for this medium type.
The range is 1 - 100. A value to '50' indciates the 'normal'
fuser temperature. Values higher than 50 indicate higher fuser
temperatures. Values lower th…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.253.8.55.75.2.1.5
xcmPrtMedmTypeSupPaperType
The paper type for this xcmPrtMedmTypeSupName.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.75.2.1.6
xcmPrtMedmTypeSupPDLString
The string used in the print stream for this
xcmPrtMedmTypeSupName.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.253.8.55.75.2.1.7
xcmPrtMedmTypeSupFuserHide
Indicates if the custom type has to be hidden in host drivers.
True means the media type is not displayed.
False means the media type can be selected for a print job
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.253.8.55.75.2.1.8