XEROX-HOST-RESOURCES-EXT-MIB
Monitored by Observium Version: 5.602.pub
The MIB module for extended configuration and management of
various host resources for network accessible host systems.
This module augments and extends the original IETF Host
Resources MIB (RFC 2790).
Usage: This MIB module introduces support for the 'realization'
of both 'physical' and 'logical' devices, consistent with the
Document Printing Application (DPA), ISO/IEC 10175, as reflected
in the object 'xcmHrDevInfoRealization'.
Note: Conforming implementations SHALL NOT 'bubble up' status
from 'physical' devices to associated 'logical' devices. All
devices SHALL report their own status ONLY.
See: Section 9 'Supplement' in XCMI Extensions to IETF Host
Resources TC, for implementation guidance for this MIB module.
Copyright (C) 1995-2006 Xerox Corporation. All Rights Reserved.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Counters
Explore Observium network monitoring
- Source file
XEROX-HOST-RESOURCES-EXT-MIB- Last revised
- Identity
xcmHrMIB- Base OID
1.3.6.1.4.1.253.8.53
Imported Objects
Net-SNMP examples using the xerox MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'XEROX-HOST-RESOURCES-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'XEROX-HOST-RESOURCES-EXT-MIB::xcmHrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-HOST-RESOURCES-EXT-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-HOST-RESOURCES-EXT-MIB::xcmHrMIB'
Objects (270)
3 directly used by Observium
Showing 270 of 270 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.0.0.53 |
||
.1.3.6.1.4.1.253.8.53 |
||
.1.3.6.1.4.1.253.8.53.10 |
||
.1.3.6.1.4.1.253.8.53.10.2 |
||
.1.3.6.1.4.1.253.8.53.10.2.1 |
||
.1.3.6.1.4.1.253.8.53.10.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.10.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.10.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.10.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.10.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.10.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.11 |
||
.1.3.6.1.4.1.253.8.53.11.2 |
||
.1.3.6.1.4.1.253.8.53.11.2.1 |
||
.1.3.6.1.4.1.253.8.53.11.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.11.2.1.2 |
|
.1.3.6.1.4.1.253.8.53.11.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.11.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.11.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.11.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.11.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.11.2.1.8 |
||
.1.3.6.1.4.1.253.8.53.12 |
||
.1.3.6.1.4.1.253.8.53.12.2 |
||
.1.3.6.1.4.1.253.8.53.12.2.1 |
||
.1.3.6.1.4.1.253.8.53.12.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.12.2.1.2 |
|
.1.3.6.1.4.1.253.8.53.12.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.12.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.12.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.12.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.12.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.12.2.1.8 |
||
.1.3.6.1.4.1.253.8.53.13 |
||
.1.3.6.1.4.1.253.8.53.13.1 |
||
.1.3.6.1.4.1.253.8.53.13.1.0 |
||
.1.3.6.1.4.1.253.8.53.13.2 |
||
.1.3.6.1.4.1.253.8.53.13.2.1 |
||
|
|
.1.3.6.1.4.1.253.8.53.13.2.1.1 |
|
.1.3.6.1.4.1.253.8.53.13.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.13.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.13.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.13.2.1.5 |
||
|
|
.1.3.6.1.4.1.253.8.53.13.2.1.6 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.53.13.2.1.7 |
|
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.13.2.1.8 |
|
OctetString
|
.1.3.6.1.4.1.253.8.53.13.2.1.9 |
|
.1.3.6.1.4.1.253.8.53.14 |
||
.1.3.6.1.4.1.253.8.53.14.2 |
||
.1.3.6.1.4.1.253.8.53.14.2.1 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.10 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.11 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.12 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.8 |
||
.1.3.6.1.4.1.253.8.53.14.2.1.9 |
||
.1.3.6.1.4.1.253.8.53.15 |
||
.1.3.6.1.4.1.253.8.53.15.2 |
||
.1.3.6.1.4.1.253.8.53.15.2.1 |
||
.1.3.6.1.4.1.253.8.53.15.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.15.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.15.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.15.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.15.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.15.2.1.6 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.53.15.2.1.7 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.15.2.1.8 |
|
.1.3.6.1.4.1.253.8.53.16 |
||
.1.3.6.1.4.1.253.8.53.16.2 |
||
.1.3.6.1.4.1.253.8.53.16.2.1 |
||
.1.3.6.1.4.1.253.8.53.16.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.16.2.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.16.2.1.3 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.16.2.1.4 |
|
.1.3.6.1.4.1.253.8.53.16.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.16.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.17 |
||
.1.3.6.1.4.1.253.8.53.17.1 |
||
.1.3.6.1.4.1.253.8.53.17.1.0 |
||
.1.3.6.1.4.1.253.8.53.17.2 |
||
.1.3.6.1.4.1.253.8.53.17.2.1 |
||
.1.3.6.1.4.1.253.8.53.17.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.17.2.1.10 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.17.2.1.11 |
|
.1.3.6.1.4.1.253.8.53.17.2.1.12 |
||
.1.3.6.1.4.1.253.8.53.17.2.1.13 |
||
.1.3.6.1.4.1.253.8.53.17.2.1.14 |
||
.1.3.6.1.4.1.253.8.53.17.2.1.15 |
||
.1.3.6.1.4.1.253.8.53.17.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.17.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.17.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.17.2.1.5 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.17.2.1.6 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.17.2.1.7 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.53.17.2.1.8 |
|
.1.3.6.1.4.1.253.8.53.17.2.1.9 |
||
.1.3.6.1.4.1.253.8.53.17.3 |
||
.1.3.6.1.4.1.253.8.53.17.4 |
||
.1.3.6.1.4.1.253.8.53.18 |
||
.1.3.6.1.4.1.253.8.53.18.2 |
||
.1.3.6.1.4.1.253.8.53.18.2.1 |
||
.1.3.6.1.4.1.253.8.53.18.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.18.2.1.2 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.18.2.1.3 |
|
.1.3.6.1.4.1.253.8.53.18.2.1.4 |
||
|
Integer32
|
.1.3.6.1.4.1.253.8.53.18.2.1.5 |
|
.1.3.6.1.4.1.253.8.53.18.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.19 |
||
.1.3.6.1.4.1.253.8.53.19.2 |
||
.1.3.6.1.4.1.253.8.53.19.2.1 |
||
.1.3.6.1.4.1.253.8.53.19.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.19.2.1.2 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.19.2.1.3 |
|
.1.3.6.1.4.1.253.8.53.19.2.1.4 |
||
|
Integer32
|
.1.3.6.1.4.1.253.8.53.19.2.1.5 |
|
.1.3.6.1.4.1.253.8.53.2 |
||
.1.3.6.1.4.1.253.8.53.2.2 |
||
.1.3.6.1.4.1.253.8.53.20 |
||
.1.3.6.1.4.1.253.8.53.20.1 |
||
.1.3.6.1.4.1.253.8.53.20.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.253.8.53.20.1.1.1 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.53.20.1.1.2 |
|
.1.3.6.1.4.1.253.8.53.20.1.1.3 |
||
.1.3.6.1.4.1.253.8.53.20.1.1.4 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.20.1.1.5 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.20.1.1.6 |
|
.1.3.6.1.4.1.253.8.53.20.2 |
||
.1.3.6.1.4.1.253.8.53.20.2.1 |
||
.1.3.6.1.4.1.253.8.53.20.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.20.2.1.10 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.53.20.2.1.2 |
|
.1.3.6.1.4.1.253.8.53.20.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.20.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.20.2.1.5 |
||
|
|
.1.3.6.1.4.1.253.8.53.20.2.1.6 |
|
.1.3.6.1.4.1.253.8.53.20.2.1.7 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.53.20.2.1.8 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.20.2.1.9 |
|
.1.3.6.1.4.1.253.8.53.21 |
||
.1.3.6.1.4.1.253.8.53.21.2 |
||
.1.3.6.1.4.1.253.8.53.21.2.1 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.10 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.11 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.12 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.8 |
||
.1.3.6.1.4.1.253.8.53.21.2.1.9 |
||
.1.3.6.1.4.1.253.8.53.22 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.22.1 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.22.2 |
|
.1.3.6.1.4.1.253.8.53.3 |
||
.1.3.6.1.4.1.253.8.53.3.1 |
||
.1.3.6.1.4.1.253.8.53.3.1.0 |
||
.1.3.6.1.4.1.253.8.53.3.2 |
||
.1.3.6.1.4.1.253.8.53.3.2.1 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.10 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.11 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.12 |
||
|
Integer32
|
.1.3.6.1.4.1.253.8.53.3.2.1.13 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.3.2.1.14 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.3.2.1.15 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.3.2.1.16 |
|
|
Integer32
|
.1.3.6.1.4.1.253.8.53.3.2.1.17 |
|
|
Integer32
|
.1.3.6.1.4.1.253.8.53.3.2.1.18 |
|
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.3.2.1.2 |
|
OctetString
|
.1.3.6.1.4.1.253.8.53.3.2.1.3 |
|
.1.3.6.1.4.1.253.8.53.3.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.8 |
||
.1.3.6.1.4.1.253.8.53.3.2.1.9 |
||
.1.3.6.1.4.1.253.8.53.4 |
||
.1.3.6.1.4.1.253.8.53.4.2 |
||
.1.3.6.1.4.1.253.8.53.4.2.1 |
||
.1.3.6.1.4.1.253.8.53.4.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.4.2.1.2 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.4.2.1.3 |
|
.1.3.6.1.4.1.253.8.53.4.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.5 |
||
.1.3.6.1.4.1.253.8.53.5.1 |
||
.1.3.6.1.4.1.253.8.53.5.1.0 |
||
.1.3.6.1.4.1.253.8.53.5.2 |
||
.1.3.6.1.4.1.253.8.53.5.2.1 |
||
.1.3.6.1.4.1.253.8.53.5.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.5.2.1.10 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.5.2.1.11 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.5.2.1.12 |
|
.1.3.6.1.4.1.253.8.53.5.2.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.5.2.1.3 |
|
.1.3.6.1.4.1.253.8.53.5.2.1.4 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.5.2.1.5 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.5.2.1.6 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.53.5.2.1.7 |
|
.1.3.6.1.4.1.253.8.53.5.2.1.8 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.5.2.1.9 |
|
.1.3.6.1.4.1.253.8.53.6 |
||
.1.3.6.1.4.1.253.8.53.6.2 |
||
.1.3.6.1.4.1.253.8.53.6.2.1 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.10 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.11 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.12 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.13 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.14 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.15 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.16 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.17 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.18 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.8 |
||
.1.3.6.1.4.1.253.8.53.6.2.1.9 |
||
.1.3.6.1.4.1.253.8.53.7 |
||
.1.3.6.1.4.1.253.8.53.7.2 |
||
.1.3.6.1.4.1.253.8.53.7.2.1 |
||
.1.3.6.1.4.1.253.8.53.7.2.1.1 |
||
|
secondsSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.253.8.53.7.2.1.10 |
|
|
secondsSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.253.8.53.7.2.1.11 |
|
.1.3.6.1.4.1.253.8.53.7.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.7.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.7.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.7.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.7.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.7.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.7.2.1.8 |
||
.1.3.6.1.4.1.253.8.53.7.2.1.9 |
||
.1.3.6.1.4.1.253.8.53.8 |
||
.1.3.6.1.4.1.253.8.53.8.2 |
||
.1.3.6.1.4.1.253.8.53.8.2.1 |
||
.1.3.6.1.4.1.253.8.53.8.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.8.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.8.2.1.3 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.53.8.2.1.4 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.53.8.2.1.5 |
|
.1.3.6.1.4.1.253.8.53.8.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.8.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.9 |
||
.1.3.6.1.4.1.253.8.53.9.2 |
||
.1.3.6.1.4.1.253.8.53.9.2.1 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.1 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.10 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.11 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.12 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.13 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.2 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.3 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.4 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.5 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.6 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.7 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.8 |
||
.1.3.6.1.4.1.253.8.53.9.2.1.9 |
Dependencies (13) 8 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- HOST-RESOURCES-MIBrfc
- IANA-CHARSET-MIBrfc
- IANA-PRINTER-MIBrfc
- Printer-MIBrfc
- XEROX-COMMON-MIBxerox
- XEROX-GENERAL-TCxerox
- XEROX-HOST-RESOURCES-EXT-TCxerox
- XEROX-HOST-RESOURCES-EXT-MIBxeroxselected
Conformance Groups (20)
Compliance Statements (1)
OID
.1.3.6.1.4.1.253.8.53.2.3The compliance statements for SNMP management agents that
implement the Host Resources Extensions MIB.
implement the Host Resources Extensions MIB.
Required groups
| mandatory | xcmHrGeneralGroup | |
| mandatory | xcmHrSuppliesGroup | |
| mandatory | xcmHrDevInfoGroup | |
| optional | xcmHrDevHelpGroup |
Implementation of this group is DEPRECATED (as of XCMI v4.1) and conforming implementations SHOULD use 'deviceHelp...' details in 'xcmHrDevDetailTable' instead. Usage: Conforming management agents which implement this group SHALL also implement the Comms Address group of the XCMI Comms Engine MIB and SHALL use 'XcmSecUserRole' values from XCMI Security TC in 'xcmCommsAddressUserRole'. Note: 'sysContact' in IETF MIB-II (RFC 1213) provides a low-cost alternative for systems which do NOT implement complex device help (contact) info via SNMP. |
| optional | xcmHrDevMgmtGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement simple device management via SNMP, and optional for all other systems. |
| optional | xcmHrDevPowerGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement device power profile management via SNMP, and optional for all other systems. Note: Systems are free to decompose the hierarchy of their hardware containment to any depth via 'hrDeviceTable' and and 'xcmHrDev[Info|Power]Table' entries, in order to manage their power profiles at any granularity. |
| optional | xcmHrDevTrafficGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement device traffic statistics via SNMP, and optional for all other systems. |
| optional | xcmHrSystemFaultGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement persistent system fault logs via SNMP, and optional for all other systems. |
| optional | xcmHrDevCalendarGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement device calendar management via SNMP, and optional for all other systems. |
| optional | xcmHrSWRunGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which support running software extensions via SNMP, and optional for all other systems. Usage: Conforming management agents which implement this group SHALL also implement the Software Running group of the IETF Host Resources MIB (RFC 2790) and MAY also support secure 'service' configuration via the XCMI Security MIB. |
| optional | xcmHrSWInstalledGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which support installed software extensions via SNMP, and optional for all other systems. Usage: Conforming management agents which implement this group SHALL also implement the Software Installed group of the IETF Host Resources MIB (RFC 2790) and MAY also support secure 'service' configuration via the XCMI Security MIB. |
| optional | xcmHrDevDetailGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement device detail info via SNMP, and optional for all other systems. |
| optional | xcmHrStorageGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which support storage extensions info via SNMP, and optional for all other systems. Usage: Conforming management agents which implement this group SHALL also implement the Storage group of the IETF Host Resources MIB (RFC 2790) and MAY also support secure 'service' configuration via the XCMI Security MIB. |
| optional | xcmHrStorageDetailGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement storage detail info via SNMP, and optional for all other systems. |
| optional | xcmHrDevCoverGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement device cover and/or interlock info via SNMP, and optional for all other systems. |
| optional | xcmHrDevAlertGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement device alerts via SNMP, and optional for all other systems. |
| optional | xcmHrConsoleScreenGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement system local console management via SNMP, and optional for all other systems. |
| optional | xcmHrConsoleTabGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement system local console management via SNMP, and optional for all other systems. |
| optional | xcmHrConsoleGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement local console management via SNMP, and optional for all other systems. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| xcmHrGeneralRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmHrDevInfoRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevInfoName | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmHrDevInfoSerialNumber | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmHrDevInfoRealization | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevInfoInstallDate | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevInfoNextDeviceIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevInfoPreviousDeviceIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevInfoPhysicalDeviceIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevHelpRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevHelpOperatorMessage | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmHrDevHelpProblemMessage | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmHrDevHelpCommsAddressIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevMgmtRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevMgmtCommandRequest |
none(1), startup(2), resetWarning(3), shutdown(5), resetCounters(7), resetWarm(8), resetCold(9), resetFactory(10), deviceDisable(1306), deviceEnable(1307), devicePause(1308), deviceResume(1309), deviceShutdown(1310), deviceResetCounters(2331), deviceResetWarm(2332), deviceResetCold(2333), deviceResetFactory(2334)
|
It is conformant to implement this object as follows: only the above subset of operations need be supported. |
|
| xcmHrDevMgmtCommandData |
OctetString
|
It is conformant to implement this object as follows: only 1 octet maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
|
| xcmHrDevMgmtUserPassword | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
| xcmHrDevMgmtOperatorPassword | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
| xcmHrDevMgmtAdminPassword | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
| xcmHrDevPowerRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevPowerWarmUpSupport | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerCoolDownSupport | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerEnergySaveSupport | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerTimeUnit | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerWarmUpDelay | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerWarmUpDuration | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerCoolDownDelay | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerCoolDownDuration | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerEnergySaveDelay | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerEnergySaveDuration | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerWakeUpSupport | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerWakeUpDelay | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerWakeUpDuration | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerShutdownDelay | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerShutdownDuration | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerStartupDelay | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevPowerStartupDuration | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevTrafficRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevTrafficInputSupport | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevTrafficOutputSupport | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevTrafficInputUnit | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevTrafficOutputUnit | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevTrafficInputMaxSize | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevTrafficOutputMaxSize | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevTrafficInputTimeout | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevTrafficOutputTimeout | readonly | It is conformant to implement this object as read-only. | |
| xcmHrSystemFaultRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrSystemFaultString |
OctetString
|
It is conformant to implement this object as read-only, and only 1 octet maximum string length need be supported. |
|
| xcmHrDevCalendarRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevCalendarExplicitDate | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevCalendarCommandRequest | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevCalendarCommandData | readonly | It is conformant to implement this object as read-only, and only 1 octet maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
|
| xcmHrSWRunRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrSWRunAdminName | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmHrSWRunPhysicalDeviceIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrSWRunLogicalDeviceIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrSWRunNextIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrSWRunPreviousIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrSWInstalledRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrSWInstalledAdminName | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmHrSWInstalledPhysicalIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrSWInstalledLogicalIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrSWInstalledNextIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrSWInstalledPreviousIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevDetailRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevDetailUnitClass | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevDetailUnit | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevDetailValueInteger | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevDetailValueOID | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevDetailValueString | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 1 octet maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
| xcmHrStorageRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrStorageRealization | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageProductDeviceIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStoragePlatformDeviceIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageMatchingDeviceIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageSWRunIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageSWInstalledIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageNextIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStoragePreviousIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStoragePhysicalIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageDetailRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrStorageDetailUnitClass | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageDetailUnit | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageDetailValueInteger | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageDetailValueOID | readonly | It is conformant to implement this object as read-only. | |
| xcmHrStorageDetailValueString | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 1 octet maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
| xcmHrDevCoverRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevCoverName | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmHrDevCoverDescription | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmHrDevCoverTypeCover | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevCoverStatusOpen | readonly | It is conformant to implement this object as read-only. | |
| xcmHrDevAlertRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmHrDevAlertCodeString |
OctetString
|
It is conformant to implement this object as read-only, and only 1 octet maximum string length need be supported. |
|
| xcmHrDevAlertDescription |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
|
| xcmHrConsoleScreenName |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
|
| xcmHrConsoleScreenDescription |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
|
| xcmHrConsoleTabName |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
|
| xcmHrConsoleTabDescription |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
|
| xcmHrConsoleDefaultService | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleBrightness | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleContrast | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleAccessibility | readwrite | It is conformant to implement this object as read-only. | |
| xcmHrConsoleAutoClearTime | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleInsertTimeout | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleTray1Timeout | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleTray2nTimeout | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleLoadTimeout | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleSoundVolume | readonly | It is conformant to implement this object as read-only. | |
| xcmHrConsoleSoundDuration | readonly | It is conformant to implement this object as read-only. |
Notifications / Traps (4)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.253.8.53.13.1.0.1 |
This trap is sent when 'xcmHrDevDetailIndex' is shared
between a counter detail and a limit detail which are specified in 'xcmHrDevDetailValueInteger', OR when 'xcmHrDevDetailValueString' specifies a trigger date. Note: The variable-bindings of this trap have been chosen to specify a complete device status change while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The detail's 'hrDeviceIndex' value, the detail's 'xcmHrDevDetailType' value, and the detail's 'xcmHrDevDetailIndex' value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows device management/monitoring applications to limit the alerts they receive to ones generated by device details of interest. |
|
.1.3.6.1.4.1.253.8.53.17.1.0.1 |
This trap is sent whenever a device alert row transitions
to 'active' row status or (optionally) transitions to 'notInService' row status in 'xcmHrDevAlertTable'. This trap is sent when requested by a prior subscription. Note: The variable-bindings of this trap have been chosen to specify a complete device alert event while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The device's 'hrDeviceIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows device management/monitoring applications to limit the alerts they receive to ones generated by devices of interest. Systems MAY add other variable-bindings from any MIB. |
|
.1.3.6.1.4.1.253.8.53.3.1.0.1 |
This trap is sent whenever 'hrDeviceStatus' and/or
'xcmHrDevInfo[XStatus|Conditions|XConditions]' changes. Note: The variable-bindings of this trap have been chosen to specify a complete device status change while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The device's 'hrDeviceIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows device management/monitoring applications to limit the alerts they receive to ones generated by devices of interest. |
|
.1.3.6.1.4.1.253.8.53.5.1.0.1 |
This trap is sent whenever an 'XcmHrDevMgmtCommandRequest'
completes, ie, when 'xcmHrDevMgmtCommandStatus' becomes the completed operation status and 'XcmHrDevMgmtCommandInProgress' goes from 'true' to 'false'. Note: The variable-bindings of this trap have been chosen to specify a complete management operation result while keeping trap messages reasonably concise (generally a few hundred octets at most). This notification has the following special semantics: o The device's 'hrDeviceIndex' field value SHALL be appended to this trap object ID, as a BER binary OID suffix. This trap OID qualifier allows device management/monitoring applications to limit the alerts they receive to ones generated by requests they have submitted. |