XEROX-COMMS-ENGINE-MIB
Version: 5.11.pub
The MIB module for detailed protocol stack graphing, and active
management of communications protocol stacks, communications end
system applications, communications intermediate systems, and
communications gateways for network accessible host systems.
Usage: Note that throughout this MIB module, the INDEX clauses
referring to 'hrDeviceIndex' for the 'hrDeviceTable' (Devices
Group) of the Host Resources MIB (RFC 2790) SHALL
specify host system CPUs (ie, 'hrDeviceProcessor') and SHALL NOT
specify ANY other 'hrDeviceType'.
Usage: The object 'xcmCommsStackXrefHrCommDevIndex' in the
Comms Stack Xref Group of this MIB MAY be used to specify
(for 'bottom' protocol stack layers) the corresponding value of
'hrDeviceIndex' for network, modem, serial port, and parallel
port devices. And the object 'xcmCommsStackXrefIfIndex' MAY be
used to specify the value of 'ifIndex' for the corresponding
entry in the MIB-II 'ifTable' (ie, 'network interfaces').
Copyright (C) 1995-2002 Xerox Corporation. All Rights Reserved.
- Source file
XEROX-COMMS-ENGINE-MIB- Last revised
- Identity
xcmCommsEngineMIB- Base OID
1.3.6.1.4.1.253.8.61
Imported Objects
Net-SNMP examples using the xerox MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'XEROX-COMMS-ENGINE-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'XEROX-COMMS-ENGINE-MIB::xcmCommsEngineMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-COMMS-ENGINE-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-COMMS-ENGINE-MIB::xcmCommsEngineMIB'
Objects (136)
Showing 136 of 136 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.0.0.61 |
||
.1.3.6.1.4.1.253.8.61 |
||
.1.3.6.1.4.1.253.8.61.10 |
||
.1.3.6.1.4.1.253.8.61.10.2 |
||
.1.3.6.1.4.1.253.8.61.10.2.1 |
||
.1.3.6.1.4.1.253.8.61.10.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.10.2.1.2 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.61.10.2.1.3 |
|
.1.3.6.1.4.1.253.8.61.10.2.1.4 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.61.10.2.1.5 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.61.10.2.1.6 |
|
.1.3.6.1.4.1.253.8.61.10.2.1.7 |
||
.1.3.6.1.4.1.253.8.61.10.2.1.8 |
||
.1.3.6.1.4.1.253.8.61.10.2.1.9 |
||
.1.3.6.1.4.1.253.8.61.11 |
||
.1.3.6.1.4.1.253.8.61.11.2 |
||
.1.3.6.1.4.1.253.8.61.11.2.1 |
||
.1.3.6.1.4.1.253.8.61.11.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.11.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.11.2.1.3 |
||
.1.3.6.1.4.1.253.8.61.11.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.11.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.11.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.11.2.1.7 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.61.11.2.1.8 |
|
.1.3.6.1.4.1.253.8.61.12 |
||
.1.3.6.1.4.1.253.8.61.12.2 |
||
.1.3.6.1.4.1.253.8.61.12.2.1 |
||
.1.3.6.1.4.1.253.8.61.12.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.12.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.12.2.1.3 |
||
.1.3.6.1.4.1.253.8.61.12.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.12.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.12.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.12.2.1.7 |
||
.1.3.6.1.4.1.253.8.61.13 |
||
.1.3.6.1.4.1.253.8.61.13.2 |
||
.1.3.6.1.4.1.253.8.61.13.2.1 |
||
.1.3.6.1.4.1.253.8.61.13.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.13.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.13.2.1.3 |
||
.1.3.6.1.4.1.253.8.61.13.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.13.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.13.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.13.2.1.7 |
||
.1.3.6.1.4.1.253.8.61.14 |
||
.1.3.6.1.4.1.253.8.61.14.2 |
||
.1.3.6.1.4.1.253.8.61.14.2.1 |
||
.1.3.6.1.4.1.253.8.61.14.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.14.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.14.2.1.3 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.61.14.2.1.4 |
|
.1.3.6.1.4.1.253.8.61.14.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.14.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.2 |
||
.1.3.6.1.4.1.253.8.61.2.2 |
||
.1.3.6.1.4.1.253.8.61.3 |
||
.1.3.6.1.4.1.253.8.61.3.2 |
||
.1.3.6.1.4.1.253.8.61.3.2.1 |
||
.1.3.6.1.4.1.253.8.61.3.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.3.2.1.10 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.61.3.2.1.2 |
|
.1.3.6.1.4.1.253.8.61.3.2.1.3 |
||
.1.3.6.1.4.1.253.8.61.3.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.3.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.3.2.1.7 |
||
.1.3.6.1.4.1.253.8.61.3.2.1.8 |
||
.1.3.6.1.4.1.253.8.61.3.2.1.9 |
||
.1.3.6.1.4.1.253.8.61.4 |
||
.1.3.6.1.4.1.253.8.61.4.2 |
||
.1.3.6.1.4.1.253.8.61.4.2.1 |
||
.1.3.6.1.4.1.253.8.61.4.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.4.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.4.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.4.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.4.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.4.2.1.7 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.61.4.2.1.8 |
|
.1.3.6.1.4.1.253.8.61.5 |
||
.1.3.6.1.4.1.253.8.61.5.2 |
||
.1.3.6.1.4.1.253.8.61.5.2.1 |
||
.1.3.6.1.4.1.253.8.61.5.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.5.2.1.10 |
||
.1.3.6.1.4.1.253.8.61.5.2.1.11 |
||
.1.3.6.1.4.1.253.8.61.5.2.1.2 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.61.5.2.1.3 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.61.5.2.1.4 |
|
.1.3.6.1.4.1.253.8.61.5.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.5.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.5.2.1.7 |
||
.1.3.6.1.4.1.253.8.61.5.2.1.8 |
||
.1.3.6.1.4.1.253.8.61.5.2.1.9 |
||
.1.3.6.1.4.1.253.8.61.6 |
||
.1.3.6.1.4.1.253.8.61.6.2 |
||
.1.3.6.1.4.1.253.8.61.6.2.1 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.10 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.61.6.2.1.11 |
|
.1.3.6.1.4.1.253.8.61.6.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.3 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.7 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.8 |
||
.1.3.6.1.4.1.253.8.61.6.2.1.9 |
||
.1.3.6.1.4.1.253.8.61.7 |
||
.1.3.6.1.4.1.253.8.61.7.2 |
||
.1.3.6.1.4.1.253.8.61.7.2.1 |
||
.1.3.6.1.4.1.253.8.61.7.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.7.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.7.2.1.3 |
||
.1.3.6.1.4.1.253.8.61.7.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.7.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.7.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.7.2.1.7 |
||
.1.3.6.1.4.1.253.8.61.7.2.1.8 |
||
.1.3.6.1.4.1.253.8.61.8 |
||
.1.3.6.1.4.1.253.8.61.8.2 |
||
.1.3.6.1.4.1.253.8.61.8.2.1 |
||
.1.3.6.1.4.1.253.8.61.8.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.8.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.8.2.1.3 |
||
.1.3.6.1.4.1.253.8.61.8.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.8.2.1.5 |
||
.1.3.6.1.4.1.253.8.61.8.2.1.6 |
||
.1.3.6.1.4.1.253.8.61.8.2.1.7 |
||
.1.3.6.1.4.1.253.8.61.9 |
||
.1.3.6.1.4.1.253.8.61.9.2 |
||
.1.3.6.1.4.1.253.8.61.9.2.1 |
||
.1.3.6.1.4.1.253.8.61.9.2.1.1 |
||
.1.3.6.1.4.1.253.8.61.9.2.1.2 |
||
.1.3.6.1.4.1.253.8.61.9.2.1.3 |
||
.1.3.6.1.4.1.253.8.61.9.2.1.4 |
||
.1.3.6.1.4.1.253.8.61.9.2.1.5 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.61.9.2.1.6 |
Dependencies (11) 8 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- HOST-RESOURCES-MIBrfc
- XEROX-COMMON-MIBxerox
- XEROX-COMMS-ENGINE-TCxerox
- XEROX-GENERAL-TCxerox
- XEROX-HOST-RESOURCES-EXT-TCxerox
- XEROX-COMMS-ENGINE-MIBxeroxselected
Conformance Groups (12)
Compliance Statements (2)
OID
.1.3.6.1.4.1.253.8.61.2.3The compliance statements for SNMP management agents that
implement the Comms Engine MIB.
implement the Comms Engine MIB.
Required groups
| mandatory | xcmCommsEngineGroup | |
| optional | xcmCommsEngineExtGroup | Implementation of this group is optional for all systems. |
| optional | xcmCommsStackGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement stack layer graphing via SNMP. |
| optional | xcmCommsStackExtGroup | Implementation of this group is optional for all systems. |
| optional | xcmCommsStackXrefGroup | Implementation of this group is optional for all systems. |
| optional | xcmCommsMuxGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement stack layer graphing via SNMP. |
| optional | xcmCommsMuxExtGroup | Implementation of this group is optional for all systems. |
| optional | xcmCommsAddressGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement address directories via SNMP. |
| optional | xcmCommsAddressExtGroup | Implementation of this group is optional for all systems. |
| optional | xcmCommsTrafficGroup | Implementation of this group is optional for all systems. |
| optional | xcmCommsAccessGroup | Implementation of this group is optional for all systems. |
| optional | xcmCommsMgmtGroup | Implementation of this group is optional for all systems. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| xcmCommsEngineRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsEngineName |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
|
| xcmCommsEngineExtRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsStackRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsStackName |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
|
| xcmCommsStackExtRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsStackXrefRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsMuxRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsMuxExtRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsAddressRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmCommsAddressTypeOID | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressUserRole | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressName | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmCommsAddressCanonical | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmCommsAddressNextIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressPreviousIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressOptionIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmCommsAddressExtForm | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtScope | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtFanout | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtMgmtIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtOwnerOID | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsTrafficRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsAccessRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsMgmtRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmCommsMgmtCommandRequest | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsMgmtCommandData | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |
OID
.1.3.6.1.4.1.253.8.61.2.4The compliance statements for SNMP management agents that
implement a subset of the Comms Engine MIB, for the sole purpose
of supporting extended 'contact' information per device, via
the Device Help group of the XCMI Ext to Host Resources MIB.
Usage: See 'Usage' paragraphs in the DESCRIPTION sub-clauses of
the following OBJECT clauses for additional usage details.
implement a subset of the Comms Engine MIB, for the sole purpose
of supporting extended 'contact' information per device, via
the Device Help group of the XCMI Ext to Host Resources MIB.
Usage: See 'Usage' paragraphs in the DESCRIPTION sub-clauses of
the following OBJECT clauses for additional usage details.
Required groups
| mandatory | xcmCommsEngineGroup | |
| mandatory | xcmCommsAddressGroup | |
| optional | xcmCommsAddressExtGroup | Implementation of this group is optional for all systems. |
| optional | xcmCommsMgmtGroup | Implementation of this group is optional for all systems. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| xcmCommsEngineRowStatus |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
|
| xcmCommsEngineName |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
|
| xcmCommsAddressRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmCommsAddressTypeOID | readonly | It is conformant to implement this object as read-only. Usage: Suitable values for this unambiguous address type are specified in the XCMI Comms Config TC, for use with the Device Help group of the XCMI Ext to Host Resources MIB (eg, 'xcmCOOsiwanPSTNAddress' - analog phone number). |
|
| xcmCommsAddressUserRole | readonly | It is conformant to implement this object as read-only. Usage: Suitable values for this unambiguous address user role are specified in the XCMI Security TC, in the textual convention 'XcmSecUserRole' (system/technician/end user), for use with the Device Help group of the XCMI Ext to Host Resources MIB (eg, 'systemSuppliesSource' - device supplies contact info). |
|
| xcmCommsAddressName | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. Usage: This object SHALL contain the human-readable 'common' name of a person (or business entity), eg 'John J Wellingtion', and NOT the user 'login' name, eg 'jwellington', for use with the Device Help group of the XCMI Ext to Host Resources MIB. |
| xcmCommsAddressCanonical | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. Usage: This object SHALL contain the 'canonical' (standardized) form of the electronic (eg, Fax) or hardcopy (eg, postal) 'address' of the person (or business entity) identified in the above 'xcmCommsAddressName' object. |
| xcmCommsAddressNextIndex | readonly | It is conformant to implement this object as read-only. Usage: This object SHALL contain the index of the next extended 'contact' info row in the 'xcmCommsAddressTable', or zero, if this is the last row in the set which is currently associated with a given managed device, for use with the Device Help group of the XCMI Ext to Host Resources MIB. |
|
| xcmCommsAddressPreviousIndex | readonly | It is conformant to implement this object as read-only. Usage: This object SHALL contain the index of the previous extended 'contact' info row in the 'xcmCommsAddressTable', or zero, if this is the first row in the set which is currently associated with a given managed device, for use with the Device Help group of the XCMI Ext to Host Resources MIB. |
|
| xcmCommsAddressOptionIndex | readonly | It is conformant to implement this object as read-only. Usage: This object SHALL contain zero, for use with the Device Help group of the XCMI Ext to Host Resources MIB. |
|
| xcmCommsAddressExtRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmCommsAddressExtForm | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtScope | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtFanout | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtMgmtIndex | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsAddressExtOwnerOID | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsMgmtRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmCommsMgmtCommandRequest | readonly | It is conformant to implement this object as read-only. | |
| xcmCommsMgmtCommandData | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. Usage: Conformant implementations MUST encrypt passwords, keys, and other security information stored in this string object. |