Wellfleet-OSPF-MIB Table View

--      The OSPF Area Data Structure contains information
--      regarding the various areas. The interfaces and
--      virtual links are configured as part of these areas.
--      Area 0.0.0.0, by definition, is the Backbone Area
        'Information describing the configured parameters and
        cumulative statistics of the router's attached areas.'
REFERENCE
        'OSPF Version 2, Section 6  The Area Data Structure'

wfOspfAreaEntry row .1.3.6.1.4.1.18.3.5.3.2.3.2.1

'Information describing the configured parameters and
cumulative statistics of one of the router's attached
areas.'

Indexes

wfOspfAreaId

Column	Syntax	OID
wfOspfAreaDeletemandatory This value determines if the OSPF router is configured with this area.	Enumerationr/w Enumerated Values: 1 created 2 deleted	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.1
wfOspfAreaDisablemandatory This value indicates the state of this area on the OSPF router.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.2
wfOspfAreaStatemandatory This value indicates the state of the OSPF Area.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.3
wfOspfAreaIdmandatory 'A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.4
wfOspfAuthTypemandatory 'The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.' REFERENCE 'OSPF Version 2, Appendix E Authentication' -- none (0), …	Enumerationr/w Enumerated Values: 1 none 2 simple-password	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.5
wfOspfImportASExternmandatory 'The area's support for importing AS external link- state advertisements.' REFERENCE `OSPF NSSA Internet Draft, Appendix D: Configuration Parameters'	Enumerationr/w Enumerated Values: 1 importExternal 2 importNoExternal 3 importNssa	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.6
wfOspfStubMetricmandatory 'The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas.'	Integer32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.7
wfOspfImportSummandatory 'The area's support for importing Summary advertisements into a stub area. This variable should not be set unless wfOspfImportASExtern is set to FALSE'	Enumerationr/w Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.8
wfOspfSpfCntmandatory The number of times the OSPF SPF algorithm has been run for this area.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.9
wfOspfPtpSpecCostEnablemandatory This value indicates the formula used to calculate the cost for point to point links.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.10
wfOspfAreaNssaTranslateCfgmandatory `Indicates whether or not an NSSA Border routes is configured to performing NSSA translation of type-7 LSAs into type-5 LSAs.' REFERENCE `OSPF NSSA Internet Draft, Appendix D: Configuration Parameters'	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.11
wfOspfAreaNssaTranslateStatusmandatory `Indicates whether or not an NSSA Border routes is performing NSSA translation of type-7 LSAs into type-5 LSAs.' REFERENCE `OSPF NSSA Internet Draft, Appendix D: Configuration Parameters'	Enumeration Enumerated Values: 1 translating 2 nottranslating	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.12
wfOspfAreaNssaOriginateDefaultRoutemandatory `whether or not an Type-7 default is originated by the ASBR'	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.13
wfOspfAreaNssaPropagateDefaultRoutemandatory `Indicates whether or not the Type-7 default route LSA will have the propagate bit (P-bit) set. If the P-bit is set, the Type-7 default route LSA is translated into a Type-5 default route LSA and the Type-5 default rou…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.14
wfOspfAreaNssaDefaultRoutePathTypemandatory `The path type applied to the type-7 default route' REFERENCE `OSPF NSSA Internet Draft, Appendix D: Configuration Parameters'	Enumerationr/w Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.18.3.5.3.2.3.2.1.15

--  OSPF Link State Database
          
--      The Link State Database contains the Link State
--      Advertisements from throughout the areas that the
--      device is attached to.
       'The OSPF Process's Links State Database.'
    REFERENCE
       'OSPF Version 2, Section 12 Link State Advertisements'

wfOspfLsdbEntry row .1.3.6.1.4.1.18.3.5.3.2.3.3.1

'A single Link State Advertisement.'

Indexes

wfOspfLsdbAreaId wfOspfLsdbType wfOspfLsdbLSID wfOspfLsdbRouterId

Column	Syntax	OID
wfOspfLsdbAreaIdmandatory 'The 32 bit identifier of the Area from which the LSA was received.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.1
wfOspfLsdbTypemandatory 'The type of the link state advertisement. Each link state type has a separate advertisement format.' REFERENCE 'OSPF Version 2, Appendix A.4.1 The Link State Advertisement header' stubLink (0), …	Enumeration Enumerated Values: 1 routerlink 2 networklink 3 summarylink 4 assummarylink 5 asexternallink 6 multicastlink 7 nssaasexternallink 15 opaquelink 16 resourcelink	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.2
wfOspfLsdbLSIDmandatory 'The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.' REFERENCE 'OSPF Versi…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.3
wfOspfLsdbRouterIdmandatory 'The 32 bit number that uniquely identifies the originating router in the Autonomous System.' REFERENCE 'OSPF Version 2, Appendix C.1 Global parameters'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.4
wfOspfLsdbSequencemandatory -- Note that the OSPF Sequence Number is a 32 bit signed -- integer. It starts with the value '80000001'h, -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- Thus, a typical sequence number will be very negati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.5
wfOspfLsdbAgemandatory 'This field is the age of the link state advertisement in seconds.' (OSPF_LSDBMINAGE = 0) REFERENCE 'OSPF Version 2, Section 12.1.1 LS age'	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.6
wfOspfLsdbChecksummandatory 'This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checks…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.7
wfOspfLsdbMetricmandatory 'Metric from LSA, if applicable.'	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.8
wfOspfLsdbAseForwardAddrmandatory 'If an ASE, the forwarding address from the LSA.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.9
wfOspfLsdbAseTagmandatory 'If an ASE, the External Route Tag from the LSA.'	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.10
wfOspfLsdbAseTypemandatory 'If an ASE, the external metric type from the LSA.'	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.11
wfOspfLsdbAdvLenmandatory 'The length of entire Link State Advertisement, including its header.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements'	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.12
wfOspfLsdbAdvmandatory 'This field is the actual OSPF advertisement in hexadecimal format'	OctetString	.1.3.6.1.4.1.18.3.5.3.2.3.3.1.13

'A range if IP addresses specified by an IP address/IP
network mask pair.  For example, class B address range
of X.X.X.X with a network mask of 255.255.0.0 includes
all IP addresses from X.X.0.0 to X.X.255.255'
         REFERENCE
'OSPF Version 2, Appendix C.2  Area parameters'

wfOspfAreaRangeEntry row .1.3.6.1.4.1.18.3.5.3.2.3.4.1

Indexes

wfOspfAreaRangeAreaID wfOspfAreaRangeNet

Column	Syntax	OID
wfOspfAreaRangeDeletemandatory This value determines if an Area Range has been configured for the OSPF router.	Enumerationr/w Enumerated Values: 1 created 2 deleted	.1.3.6.1.4.1.18.3.5.3.2.3.4.1.1
wfOspfAreaRangeDisablemandatory 'This variable displays the status of the entry. Setting it to 'DISBALED' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.'	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.4.1.2
wfOspfAreaRangeStatemandatory The state of the OSPF Area Range.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.18.3.5.3.2.3.4.1.3
wfOspfAreaRangeAreaIDmandatory 'The Area the Address Range is to be found within.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.4.1.4
wfOspfAreaRangeNetmandatory 'The IP Address of the Net or Subnet indicated by the range.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.4.1.5
wfOspfAreaRangeMaskmandatory 'The Subnet Mask that pertains to the Net or Subnet.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.4.1.6
wfOspfAreaRangeStatusmandatory 'Set to either Advertise or DoNotAdvertise. Routing information is condensed at area boundaries. External to the area, at most a single route is advertised for each address range. The route is advertised if and only …	Enumerationr/w Enumerated Values: 1 advertise 2 block	.1.3.6.1.4.1.18.3.5.3.2.3.4.1.7
wfOspfAreaRangeMetricmandatory 'The metric to advertise into other areas as the distance from the OSPF router to any network in the range. The default of 0 means to use the value calculated by OSPF.' REFERENCE 'OSPF Version 2, Appendix C.…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.4.1.8

--  OSPF Interface Table
          
--      The OSPF Interface Table augments the ifTable with OSPF
--      specific information.
          
          
       'The OSPF Interface Table describes the interfaces from
       the viewpoint of OSPF.'
    REFERENCE
       'OSPF Version 2, Appendix C.3  Router interface
       parameters'

wfOspfIfEntry row .1.3.6.1.4.1.18.3.5.3.2.3.5.1

'The OSPF Interface Entry describes one interface from
the viewpoint of OSPF.'

Indexes

wfOspfIfIpAddress wfOspfAddressLessIf

Column	Syntax	OID
wfOspfIfDeletemandatory This variable determines in an OSPF Interface has been configured on the router.	Enumerationr/w Enumerated Values: 1 created 2 deleted	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.1
wfOspfIfDisablemandatory 'The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'd…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.2
wfOspfIfStatemandatory 'The OSPF Interface State.' down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7)	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointtopoint 5 designatedrouter 6 backupdesignatedrouter 7 otherdesignatedrouter	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.3
wfOspfIfIpAddressmandatory 'The IP address of this OSPF interface.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.4
wfOspfAddressLessIfmandatory 'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Addr…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.5
wfOspfIfAreaIdmandatory 'A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.' default { '00000000'H } -- 0.0.0.0	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.6
wfOspfIfTypemandatory 'The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast'. Medias whic…	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointtopoint 4 pmp 5 ietf 6 passive	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.7
wfOspfIfRtrPrioritymandatory 'The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.8
wfOspfIfTransitDelaymandatory 'The estimated number of seconds it takes to transmit a link- state update packet over this interface.'	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.9
wfOspfIfRetransIntervalmandatory 'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.'	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.10
wfOspfIfHelloIntervalmandatory 'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.'	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.11
wfOspfIfRtrDeadIntervalmandatory 'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers at…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.12
wfOspfIfPollIntervalmandatory 'The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor.'	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.13
wfOspfIfDesignatedRoutermandatory 'The IP Address of the Designated Router.' default { '00000000'H } -- 0.0.0.0	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.14
wfOspfIfBackupDesignatedRoutermandatory 'The IP Address of the Backup Designated Router.' default { '00000000'H } -- 0.0.0.0	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.15
wfOspfIfMetricCostmandatory 'The cost of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'.'	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.16
wfOspfIfAuthKeymandatory 'The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey al…	OctetStringr/w	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.17
wfOspfIfTxHellosmandatory Number of OSPF Hello packets transmitted.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.18
wfOspfIfTxDBDescriptsmandatory Number of OSPF DataBase Description packets transmitted.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.19
wfOspfIfTxLinkStateReqsmandatory Number of OSPF Link State Request packets transmitted.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.20
wfOspfIfTxLinkStateUpdsmandatory Number of OSPF Link State Update packets transmitted.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.21
wfOspfIfTxLinkStateAcksmandatory Number of OSPF Link States Acknowledgements transmitted.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.22
wfOspfIfRxHellosmandatory Number of OSPF Hello packets received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.23
wfOspfIfRxDBDescriptsmandatory Number of OSPF DataBase Description packets received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.24
wfOspfIfRxLinkStateReqsmandatory Number of OSPF Link State Requests received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.25
wfOspfIfRxLinkStateUpdsmandatory Number of OSPF Link State Updates received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.26
wfOspfIfRxLinkStateAcksmandatory Number of OSPF Link State Acknowledgements received.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.27
wfOspfIfDropsmandatory Number of OSPF packets dropped because of invalid information in the packet.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.28
wfOspfMtuSizemandatory Configure MTU size per OSPF interface This parameter has the following values/meanings: 1 - Use the MTU specified by IP 2 - Use the MTU of ethernet, regardless of what IP says > 2 - Use this value as the…	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.29
wfOspfIfMulticastForwardingmandatory The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NB…	Enumerationr/w Enumerated Values: 1 blocked 2 multicast 3 unicast	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.30
wfOspfIfOpaqueOnmandatory This controls whether or not OPAQUE LSAs are to be flooded out this interface or not.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.31
wfOspfIfBwRatemandatory Available BW (token bucket rate) on the intf	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.32
wfOspfIfBwDepthmandatory Available BW (token bucket depth) on the intf	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.33
wfOspfIfMtuMismatchDetectmandatory Controls the interpretation of the MTU field in the database description packet header. Per RFC 2178 the MTU indicates the largest size IP packet that an OSPF interface can receive. If the MTU is greater than that whi…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.5.1.34

--  OSPF Virtual Interface Table
          
--      The Virtual Interface Table describes the virtual
--      links that the OSPF Process is configured to
--      carry on.
          
          
       'Information about this router's virtual interfaces.'
    REFERENCE
       'OSPF Version 2, Appendix C.4  Virtual link parameters'

wfOspfVirtIfEntry row .1.3.6.1.4.1.18.3.5.3.2.3.6.1

'Information about a single Virtual Interface.'

Indexes

wfOspfVirtIfAreaID wfOspfVirtIfNeighbor

Column	Syntax	OID
wfOspfVirtIfDeletemandatory	Enumerationr/w Enumerated Values: 1 created 2 deleted	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.1
wfOspfVirtIfDisablemandatory 'This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.'	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.2
wfOspfVirtIfStatemandatory 'OSPF virtual interface states.' down (1), -- these use the same encoding pointToPoint (4) -- as the ospfIfTable	Enumeration Enumerated Values: 1 down 4 pointtopoint	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.3
wfOspfVirtIfAreaIDmandatory 'The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.4
wfOspfVirtIfNeighbormandatory 'The Router ID of the Virtual Neighbor.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.5
wfOspfVirtIfTransitDelaymandatory 'The estimated number of seconds it takes to transmit a link- state update packet over this interface.'	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.6
wfOspfVirtIfRetransIntervalmandatory 'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. Thi…	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.7
wfOspfVirtIfHelloIntervalmandatory 'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.'	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.8
wfOspfVirtIfRtrDeadIntervalmandatory 'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual ne…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.9
wfOspfVirtIfAuthKeymandatory 'If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length zero.' REFERENCE 'OSPF Version 2, Sec…	OctetStringr/w	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.10
wfOspfVirtIfTxHellosmandatory Number of OSPF Hello packets transmitted on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.11
wfOspfVirtIfTxDBDescriptsmandatory Number of OSPF DataBase Description packets transmitted on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.12
wfOspfVirtIfTxLinkStateReqsmandatory Number of OSPF Link State Request packets transmitted on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.13
wfOspfVirtIfTxLinkStateUpdsmandatory Number of OSPF Link State Update packets transmitted on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.14
wfOspfVirtIfTxLinkStateAcksmandatory Number of OSPF Link State Acknowledgement packets transmitted on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.15
wfOspfVirtIfRxHellosmandatory Number of OSPF Hello packets received on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.16
wfOspfVirtIfRxDBDescriptsmandatory Number of OSPF DataBase Description packets received on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.17
wfOspfVirtIfRxLinkStateReqsmandatory Number of OSPF Link State Request packets recieved on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.18
wfOspfVirtIfRxLinkStateUpdsmandatory Number of OSPF Link State Update packets received on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.19
wfOspfVirtIfRxLinkStateAcksmandatory Number of OSPF Link State Acknowledgement packets received on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.20
wfOspfVirtIfDropsmandatory Number of OSPF packets dropped on Virtual Interfaces.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.6.1.21

--  OSPF Neighbor Table
          
--      The OSPF Neighbor Table describes all neighbors in
--      the locality of the subject router.
          
          
       'A table of non-virtual neighbor information.'
    REFERENCE
       'OSPF Version 2, Section 10 The Neighbor Data
       Structure'

wfOspfNbrEntry row .1.3.6.1.4.1.18.3.5.3.2.3.7.1

'The information regarding a single neighbor.'
REFERENCE
'OSPF Version 2, Section 10 The Neighbor Data
Structure'

Indexes

wfOspfNbrIpAddr wfOspfNbrAddressLessIndex

Column	Syntax	OID
wfOspfNbrDeletemandatory This variable indicates the existence of a static OSPF neighbor.	Enumerationr/w Enumerated Values: 1 created 2 deleted	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.1
wfOspfNbrDisablemandatory 'This variable displays the status of the entry. Setting it to 'DISABLED' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.'	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.2
wfOspfNbrStatemandatory 'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoway 5 exchangstart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.3
wfOspfNbrIpAddrmandatory 'The IP address of this neighbor.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.4
wfOspfNbrIfAddrmandatory 'The Interface IP address for this neighbor.'	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.5
wfOspfNbrAddressLessIndexmandatory ' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.'	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.6
wfOspfNbrRtrIdmandatory 'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H } -- 0.0.0.0	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.7
wfOspfNbrOptionsmandatory 'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, in…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.8
wfOspfNbrPrioritymandatory 'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.' This is the user configur…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.9
wfOspfNbrEventsmandatory 'The number of times this neighbor relationship has changed state, or an error has occurred.'	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.10
wfOspfNbrLSRetransQLenmandatory 'The current length of the retransmission queue.'	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.11
wfOspfCurNbrPrioritymandatory This value represents the priority of the neighbor as indicated in received Hello packets. In most cases, this will be the same as wfOspfCfgNbrPriority. If they are different, it indicates a misconfiguration	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.7.1.12

--  WFOSPF Virtual Neighbor Table
          
--      This table describes all virtual neighbors.
--      Since Virtual Links are configured in the
--      virtual interface table, this table is read-only.
          
       'A table of virtual neighbor information.'
    REFERENCE
       'OSPF Version 2, '

wfOspfVirtNbrEntry row .1.3.6.1.4.1.18.3.5.3.2.3.8.1

'Virtual neighbor information.'
REFERENCE
'OSPF Version 2, '

Indexes

wfOspfVirtNbrArea wfOspfVirtNbrRtrId

Column	Syntax	OID
wfOspfVirtNbrAreamandatory 'The Transit Area Identifier.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.8.1.1
wfOspfVirtNbrRtrIdmandatory 'A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.8.1.2
wfOspfVirtNbrIpAddrmandatory 'The IP address this Virtual Neighbor is using.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.8.1.3
wfOspfVirtNbrOptionsmandatory 'A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor.'	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.8.1.4
wfOspfVirtNbrStatemandatory 'The state of the Virtual Neighbor Relationship.' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoway 5 exchangstart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.18.3.5.3.2.3.8.1.5
wfOspfVirtNbrEventsmandatory 'The number of times this virtual link has changed its state, or an error has occurred.'	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.8.1.6
wfOspfVirtNbrLSRetransQLenmandatory 'The current length of the retransmission queue.'	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.8.1.7

--  OSPF Dynamic Neighbor Table
          
--      The OSPF Dynamic Neighbor Table describes all neighbors in
--      the locality of the subject router learned during operation.
          
          
       'A table of non-virtual neighbor information.'
    REFERENCE
       'OSPF Version 2, Section 10 The Neighbor Data
       Structure'

wfOspfDynNbrEntry row .1.3.6.1.4.1.18.3.5.3.2.3.9.1

'The information regarding a single neighbor.'
REFERENCE
'OSPF Version 2, Section 10 The Neighbor Data
Structure'

Indexes

wfOspfDynNbrIpAddr wfOspfDynNbrAddressLessIndex

Column	Syntax	OID
wfOspfDynNbrStatemandatory 'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8)	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoway 5 exchangstart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.1
wfOspfDynNbrIpAddrmandatory 'The IP address of this neighbor.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.2
wfOspfDynNbrIfAddrmandatory 'The Interface IP address for this neighbor.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.3
wfOspfDynNbrAddressLessIndexmandatory ' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.'	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.4
wfOspfDynNbrRtrIdmandatory 'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H } -- 0.0.0.0	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.5
wfOspfDynNbrOptionsmandatory 'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, in…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.6
wfOspfDynNbrPrioritymandatory 'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.'	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.7
wfOspfDynNbrEventsmandatory 'The number of times this neighbor relationship has changed state, or an error has occurred.'	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.8
wfOspfDynNbrLSRetransQLenmandatory 'The current length of the retransmission queue.'	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.9.1.9

--  OSPF Backup Link State Database
          
--      The Backup Link State Database contains the Link State
--      Advertisements from throughout the areas that the
--      device is attached to.
       'The OSPF Process's Links State Database.'
    REFERENCE
       'OSPF Version 2, Section 12 Link State Advertisements'

wfOspfBackupLsdbEntry row .1.3.6.1.4.1.18.3.5.3.2.3.10.1

'A single Link State Advertisement.'

Indexes

wfOspfBackupLsdbAreaId wfOspfBackupLsdbType wfOspfBackupLsdbLSID wfOspfBackupLsdbRouterId

Column	Syntax	OID
wfOspfBackupLsdbAreaIdmandatory 'The 32 bit identifier of the Area from which the LSA was received.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.1
wfOspfBackupLsdbTypemandatory 'The type of the link state advertisement. Each link state type has a separate advertisement format.' REFERENCE 'OSPF Version 2, Appendix A.4.1 The Link State Advertisement header' stubLink (0), …	Enumeration Enumerated Values: 1 routerlink 2 networklink 3 summarylink 4 assummarylink 5 asexternallink 7 nssaasexternallink	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.2
wfOspfBackupLsdbLSIDmandatory 'The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.' REFERENCE 'OSPF Versi…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.3
wfOspfBackupLsdbRouterIdmandatory 'The 32 bit number that uniquely identifies the originating router in the Autonomous System.' REFERENCE 'OSPF Version 2, Appendix C.1 Global parameters'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.4
wfOspfBackupLsdbSequencemandatory -- Note that the OSPF Sequence Number is a 32 bit signed -- integer. It starts with the value '80000001'h, -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- Thus, a typical sequence number will be very negati…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.5
wfOspfBackupLsdbAgemandatory 'This field is the age of the link state advertisement in seconds.' (OSPF_LSDBMINAGE = 0) REFERENCE 'OSPF Version 2, Section 12.1.1 LS age'	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.6
wfOspfBackupLsdbChecksummandatory 'This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checks…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.7
wfOspfBackupLsdbMetricmandatory 'Metric from LSA, if applicable.'	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.8
wfOspfBackupLsdbAseForwardAddrmandatory 'If an ASE, the forwarding address from the LSA.'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.9
wfOspfBackupLsdbAseTagmandatory 'If an ASE, the External Route Tag from the LSA.'	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.10
wfOspfBackupLsdbAseTypemandatory 'If an ASE, the external metric type from the LSA.'	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.11
wfOspfBackupLsdbAdvLenmandatory 'The length of entire Link State Advertisement, including its header.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements'	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.12
wfOspfBackupLsdbAdvmandatory 'This field is the actual OSPF advertisement in hexadecimal format'	OctetString	.1.3.6.1.4.1.18.3.5.3.2.3.10.1.13

--  OSPF NSSA Range Table
          
--      The OSPF NSSA Range Table describes the Type-7 address
	-- 	ranges used in translation/aggregation of Type-7 LSAs
	--	into Type-5 LSAs.
    REFERENCE
       'OSPF Internet Draft, Section 3.2 Type-7 Address Range'

wfOspfNSSARangeEntry row .1.3.6.1.4.1.18.3.5.3.2.3.12.1

Indexes

wfOspfNSSARangeNet

Column	Syntax	OID
wfOspfNSSARangeDeletemandatory This value determines if an type-7 Range has been configured for the OSPF NSSA border router .	Enumerationr/w Enumerated Values: 1 created 2 deleted	.1.3.6.1.4.1.18.3.5.3.2.3.12.1.1
wfOspfNSSARangeDisablemandatory `This variable displays the status of the entry. Setting it to `DISBALED' has the effect of rendering it inoperative. '	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.18.3.5.3.2.3.12.1.2
wfOspfNSSARangeNetmandatory `The IP Address of the Net or Subnet indicated by the range.' REFERENCE `OSPF NSSA Internet Draft, 3.2 type-7 address range'	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.12.1.3
wfOspfNSSARangeMaskmandatory `The Subnet Mask that pertains to the Net or Subnet.' REFERENCE `OSPF NSSA Internet Draft, 3.2 type-7 address range'	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.18.3.5.3.2.3.12.1.4
wfOspfNSSARangeStatusmandatory `Set to either Advertise or DoNotAdvertise. Routing information is condensed at area boundaries. External to the area, at most a single route is advertised for each address range. The route is advertised if and only …	Enumerationr/w Enumerated Values: 1 advertise 2 block	.1.3.6.1.4.1.18.3.5.3.2.3.12.1.5
wfOspfNSSARangeExternRouteTagmandatory `External route tag. This value is used in the aggregated type-5 LSA' REFERENCE `OSPF NSSA Internet Draft, 3.2 type-7 address range'	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.18.3.5.3.2.3.12.1.6