WebGraph-Thermometer-US-MIB Table View

List of sensors.

wtWebioAn1GraphSensorEntry row .1.3.6.1.4.1.5040.1.2.8.1.2.1

Temperature sensor numbers.

Indexes

wtWebioAn1GraphSensorNo

Column	Syntax	OID
wtWebioAn1GraphSensorNomandatory Temperature sensor number.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.5040.1.2.8.1.2.1.1

List of temperature values corresponding to the channel numbers.

wtWebioAn1GraphTempValueEntry row .1.3.6.1.4.1.5040.1.2.8.1.3.1

Temperatures of the sensors.

Indexes

wtWebioAn1GraphSensorNo

Column	Syntax	OID
wtWebioAn1GraphTempValuemandatory Temperature value of the sensor, ASCII, 5 characters in length.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.8.1.3.1.1

List of binary temperature values corresponding to the channel numbers.

wtWebioAn1GraphBinaryTempValueEntry row .1.3.6.1.4.1.5040.1.2.8.1.4.1

Binary temperature values of the sensors.

Indexes

wtWebioAn1GraphSensorNo

Column	Syntax	OID
wtWebioAn1GraphBinaryTempValuemandatory Binary temperature value of the sensor in 1/10 degrees Celsius, signed number, 0x7FFF indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.8.1.4.1.1

List of sensor colors for the praphical presentation.

wtWebioAn1GraphSensorColorEntry row .1.3.6.1.4.1.5040.1.2.8.3.1.4.4.1

Index numbers of the sensors.

Indexes

wtWebioAn1GraphSensorNo

Column	Syntax	OID
wtWebioAn1GraphSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.8.3.1.4.4.1.1

List of alarm indices.

wtWebioAn1GraphAlarmIfEntry row .1.3.6.1.4.1.5040.1.2.8.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebioAn1GraphAlarmNo

Column	Syntax	OID
wtWebioAn1GraphAlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.8.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebioAn1GraphAlarmEntry row .1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebioAn1GraphAlarmNo

Column	Syntax	OID
wtWebioAn1GraphAlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 B…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.1
wtWebioAn1GraphAlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.2
wtWebioAn1GraphAlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.3
wtWebioAn1GraphAlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.4
wtWebioAn1GraphAlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.5
wtWebioAn1GraphAlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.6
wtWebioAn1GraphAlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.7
wtWebioAn1GraphAlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.8
wtWebioAn1GraphAlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.9
wtWebioAn1GraphAlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.10
wtWebioAn1GraphAlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.11
wtWebioAn1GraphAlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.12
wtWebioAn1GraphAlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.13
wtWebioAn1GraphAlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.14
wtWebioAn1GraphAlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.15
wtWebioAn1GraphAlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.16
wtWebioAn1GraphAlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.17
wtWebioAn1GraphAlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.18
wtWebioAn1GraphAlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.19
wtWebioAn1GraphAlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.20
wtWebioAn1GraphAlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.21
wtWebioAn1GraphAlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.22
wtWebioAn1GraphAlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.23
wtWebioAn1GraphAlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.24
wtWebioAn1GraphAlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.25
wtWebioAn1GraphAlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.26
wtWebioAn1GraphAlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.27
wtWebioAn1GraphAlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.28
wtWebioAn1GraphAlarmFtpOptionsmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.29
wtWebioAn1GraphAlarmTimerCronmandatory This entry contains 5 text fields space or tab seperated for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separately. 1: Minutes Rang…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.30

List of settings depending on the sensor number.

wtWebioAn1GraphPortEntry row .1.3.6.1.4.1.5040.1.2.8.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebioAn1GraphSensorNo

Column	Syntax	OID
wtWebioAn1GraphPortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.2.1.1.1
wtWebioAn1GraphPortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.2.1.1.2
wtWebioAn1GraphPortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.2.1.1.3
wtWebioAn1GraphPortTemperature1mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.2.1.1.4
wtWebioAn1GraphPortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.2.1.1.5
wtWebioAn1GraphPortTemperature2mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.2.1.1.6
wtWebioAn1GraphPortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.8.3.2.1.1.7