WebGraph-OLD-Thermometer-NTC-US-MIB Table View

List of sensors.

wtWebioAn1GraphNtcSensorEntry row .1.3.6.1.4.1.5040.1.2.18.1.2.1

Temperature sensor numbers.

Indexes

wtWebioAn1GraphNtcSensorNo

Column	Syntax	OID
wtWebioAn1GraphNtcSensorNomandatory Temperature sensor number.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.5040.1.2.18.1.2.1.1

List of temperature values corresponding to the channel numbers.

wtWebioAn1GraphNtcTempValueEntry row .1.3.6.1.4.1.5040.1.2.18.1.3.1

Temperatures of the sensors.

Indexes

wtWebioAn1GraphNtcSensorNo

Column	Syntax	OID
wtWebioAn1GraphNtcTempValuemandatory Temperature value of the sensor, ASCII, 5 characters in length.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.18.1.3.1.1

List of binary temperature values corresponding to the channel numbers.

wtWebioAn1GraphNtcBinaryTempValueEntry row .1.3.6.1.4.1.5040.1.2.18.1.4.1

Binary temperature values of the sensors.

Indexes

wtWebioAn1GraphNtcSensorNo

Column	Syntax	OID
wtWebioAn1GraphNtcBinaryTempValuemandatory Binary temperature value of the sensor in 1/10 degrees Celsius, signed number, 0x7FFF indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.18.1.4.1.1

List of temperature values corresponding to the channel numbers.

wtWebioAn1GraphNtcTempValuePktEntry row .1.3.6.1.4.1.5040.1.2.18.1.8.1

Temperatures of the sensors.

Indexes

wtWebioAn1GraphNtcSensorNo

Column	Syntax	OID
wtWebioAn1GraphNtcTempValuePktmandatory Temperature value of the sensor, ASCII, 5 characters in length, decimal point.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.18.1.8.1.1

List of sensor colors for the praphical presentation.

wtWebioAn1GraphNtcSensorColorEntry row .1.3.6.1.4.1.5040.1.2.18.3.1.4.4.1

Index numbers of the sensors.

Indexes

wtWebioAn1GraphNtcSensorNo

Column	Syntax	OID
wtWebioAn1GraphNtcSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.18.3.1.4.4.1.1

List of alarm indices.

wtWebioAn1GraphNtcAlarmIfEntry row .1.3.6.1.4.1.5040.1.2.18.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebioAn1GraphNtcAlarmNo

Column	Syntax	OID
wtWebioAn1GraphNtcAlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.18.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebioAn1GraphNtcAlarmEntry row .1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebioAn1GraphNtcAlarmNo

Column	Syntax	OID
wtWebioAn1GraphNtcAlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 B…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.1
wtWebioAn1GraphNtcAlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.2
wtWebioAn1GraphNtcAlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.3
wtWebioAn1GraphNtcAlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.4
wtWebioAn1GraphNtcAlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.5
wtWebioAn1GraphNtcAlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.6
wtWebioAn1GraphNtcAlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.7
wtWebioAn1GraphNtcAlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.8
wtWebioAn1GraphNtcAlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.9
wtWebioAn1GraphNtcAlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.10
wtWebioAn1GraphNtcAlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.11
wtWebioAn1GraphNtcAlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.12
wtWebioAn1GraphNtcAlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.13
wtWebioAn1GraphNtcAlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.14
wtWebioAn1GraphNtcAlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.15
wtWebioAn1GraphNtcAlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.16
wtWebioAn1GraphNtcAlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.17
wtWebioAn1GraphNtcAlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.18
wtWebioAn1GraphNtcAlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.19
wtWebioAn1GraphNtcAlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.20
wtWebioAn1GraphNtcAlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.21
wtWebioAn1GraphNtcAlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.22
wtWebioAn1GraphNtcAlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.23
wtWebioAn1GraphNtcAlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.24
wtWebioAn1GraphNtcAlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.25
wtWebioAn1GraphNtcAlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.26
wtWebioAn1GraphNtcAlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.27
wtWebioAn1GraphNtcAlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.28
wtWebioAn1GraphNtcAlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.29
wtWebioAn1GraphNtcAlarmTimerCronmandatory This entry contains 5 text fields space or tab seperated for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separately. 1: Minutes Rang…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.5.3.1.30

List of sensor colors for the praphical presentation.

wtWebioAn1GraphNtc2SensorColorEntry row .1.3.6.1.4.1.5040.1.2.18.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebioAn1GraphNtcSensorNo

Column	Syntax	OID
wtWebioAn1GraphNtcGraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.18.3.1.6.2.3.1.1
wtWebioAn1GraphNtcGraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.1.6.2.3.1.2

List of settings depending on the sensor number.

wtWebioAn1GraphNtcPortEntry row .1.3.6.1.4.1.5040.1.2.18.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebioAn1GraphNtcSensorNo

Column	Syntax	OID
wtWebioAn1GraphNtcPortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.2.1.1.1
wtWebioAn1GraphNtcPortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.2.1.1.2
wtWebioAn1GraphNtcPortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.2.1.1.3
wtWebioAn1GraphNtcPortTemperature1mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.2.1.1.4
wtWebioAn1GraphNtcPortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.2.1.1.5
wtWebioAn1GraphNtcPortTemperature2mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.2.1.1.6
wtWebioAn1GraphNtcPortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.18.3.2.1.1.7