WebGraph-OLD-Air-Quality-US-MIB Table View

List of sensors.

wtWebGraphAirQualitySensorEntry row .1.3.6.1.4.1.5040.1.2.35.1.2.1

List of sensor numbers.

Indexes

wtWebGraphAirQualitySensorNo

Column	Syntax	OID
wtWebGraphAirQualitySensorNomandatory Sensor number.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5040.1.2.35.1.2.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphAirQualityTempValueEntry row .1.3.6.1.4.1.5040.1.2.35.1.3.1

Measurement values of the sensors.

Indexes

wtWebGraphAirQualitySensorNo

Column	Syntax	OID
wtWebGraphAirQualityTempValuemandatory Measurement value of the sensor, ASCII, 5 characters in length.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.35.1.3.1.1

List of binary measurement values corresponding to the channel numbers.

wtWebGraphAirQualityBinaryTempValueEntry row .1.3.6.1.4.1.5040.1.2.35.1.4.1

Binary measurement values of the sensors.

Indexes

wtWebGraphAirQualitySensorNo

Column	Syntax	OID
wtWebGraphAirQualityBinaryTempValuemandatory Binary measurement value of the sensor in 1/10 degrees Celsius, 1/10 per cent or 1/10 ppm, signed number, 0x7FFFFFFF indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.35.1.4.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphAirQualityTempValuePktEntry row .1.3.6.1.4.1.5040.1.2.35.1.8.1

Measurement values of the sensors.

Indexes

wtWebGraphAirQualitySensorNo

Column	Syntax	OID
wtWebGraphAirQualityTempValuePktmandatory Measurement value of the sensor, ASCII, 5 characters in length, delimeter is decimal point.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.35.1.8.1.1

List of alarm indices.

wtWebGraphAirQualityAlarmIfEntry row .1.3.6.1.4.1.5040.1.2.35.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebGraphAirQualityAlarmNo

Column	Syntax	OID
wtWebGraphAirQualityAlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.35.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebGraphAirQualityAlarmEntry row .1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebGraphAirQualityAlarmNo

Column	Syntax	OID
wtWebGraphAirQualityAlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.1
wtWebGraphAirQualityAlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.2
wtWebGraphAirQualityAlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.3
wtWebGraphAirQualityAlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.4
wtWebGraphAirQualityAlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.5
wtWebGraphAirQualityAlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.6
wtWebGraphAirQualityAlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.7
wtWebGraphAirQualityAlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.8
wtWebGraphAirQualityAlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.9
wtWebGraphAirQualityAlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.10
wtWebGraphAirQualityAlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.11
wtWebGraphAirQualityAlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.12
wtWebGraphAirQualityAlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.13
wtWebGraphAirQualityAlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.14
wtWebGraphAirQualityAlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.15
wtWebGraphAirQualityAlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.16
wtWebGraphAirQualityAlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.17
wtWebGraphAirQualityAlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.18
wtWebGraphAirQualityAlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.19
wtWebGraphAirQualityAlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.20
wtWebGraphAirQualityAlarmDeltaTempmandatory Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.21
wtWebGraphAirQualityAlarmRHMinmandatory Minimum rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.22
wtWebGraphAirQualityAlarmRHMaxmandatory Maximum rel.Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.23
wtWebGraphAirQualityAlarmRHHysteresismandatory Hysteresis of rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.24
wtWebGraphAirQualityAlarmAHMinmandatory Minimum abs. Humidity in g/(m*m*m) with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.25
wtWebGraphAirQualityAlarmAHMaxmandatory Maximum abs. Humidity in g/(m*m*m) with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.26
wtWebGraphAirQualityAlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.27
wtWebGraphAirQualityAlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.28
wtWebGraphAirQualityAlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.29
wtWebGraphAirQualityAlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.30
wtWebGraphAirQualityAlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.31
wtWebGraphAirQualityAlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.32
wtWebGraphAirQualityAlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.33
wtWebGraphAirQualityAlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.34
wtWebGraphAirQualityAlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.35
wtWebGraphAirQualityAlarmTimerCronmandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.36
wtWebGraphAirQualityAlarmVocMaxmandatory Maximum VOC in ppm with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.37
wtWebGraphAirQualityAlarmVocHysteresismandatory Hysteresis of VOC in ppm with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.38
wtWebGraphAirQualityAlarmNamemandatory Alert name	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.39
wtWebGraphAirQualityAlarmActivemandatory Alert active 1 = ON 0 = OFF	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.5.3.1.40

List of sensor colors for the praphical presentation.

wtWebGraphAirQualitySensorColorEntry row .1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebGraphAirQualitySensorNo

Column	Syntax	OID
wtWebGraphAirQualityGraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1.1
wtWebGraphAirQualityGraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.1.6.2.3.1.2

List of settings depending on the sensor number.

wtWebGraphAirQualityPortEntry row .1.3.6.1.4.1.5040.1.2.35.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebGraphAirQualitySensorNo

Column	Syntax	OID
wtWebGraphAirQualityPortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.2.1.1.1
wtWebGraphAirQualityPortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.2.1.1.2
wtWebGraphAirQualityPortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.2.1.1.3
wtWebGraphAirQualityPortTemperature1mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.2.1.1.4
wtWebGraphAirQualityPortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.2.1.1.5
wtWebGraphAirQualityPortTemperature2mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.2.1.1.6
wtWebGraphAirQualityPortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.35.3.2.1.1.7