WebGraph-AnalogIn-57644-US-MIB Table View

List of sensors.

wtWebGraphAnalogIn57644SensorEntry row .1.3.6.1.4.1.5040.1.2.12.1.2.1

List of sensor numbers.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebGraphAnalogIn57644SensorNomandatory Sensor number.	Integer32	.1.3.6.1.4.1.5040.1.2.12.1.2.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphAnalogIn57644ValuesEntry row .1.3.6.1.4.1.5040.1.2.12.1.3.1

Measurement values of the sensors.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebGraphAnalogIn57644Valuesmandatory Measurement value of the sensor, ASCII, 7 characters in length.	OctetString	.1.3.6.1.4.1.5040.1.2.12.1.3.1.1

List of binary measurement values corresponding to the channel numbers.

wtWebGraphAnalogIn57644BinaryValuesEntry row .1.3.6.1.4.1.5040.1.2.12.1.4.1

Binary measurement values of the sensors.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebGraphAnalogIn57644BinaryValuesmandatory Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.12.1.4.1.1

List of sensor colors for the praphical presentation.

wtWebGraphAnalogIn57644SensorColorEntry row .1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1

Index numbers of the sensors.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebGraphAnalogIn57644SensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1.1

List of alarm indices.

wtWebGraphAnalogIn57644AlarmIfEntry row .1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1

Numbers of the alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebGraphAnalogIn57644AlarmNomandatory Alarm number.	Integer32	.1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebGraphAnalogIn57644AlarmEntry row .1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebGraphAnalogIn57644AlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.1
wtWebGraphAnalogIn57644AlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.2
wtWebGraphAnalogIn57644AlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.3
wtWebGraphAnalogIn57644AlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.4
wtWebGraphAnalogIn57644AlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.5
wtWebGraphAnalogIn57644AlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.6
wtWebGraphAnalogIn57644AlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.7
wtWebGraphAnalogIn57644AlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.8
wtWebGraphAnalogIn57644AlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.9
wtWebGraphAnalogIn57644AlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.10
wtWebGraphAnalogIn57644AlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.11
wtWebGraphAnalogIn57644AlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.12
wtWebGraphAnalogIn57644AlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.13
wtWebGraphAnalogIn57644AlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.14
wtWebGraphAnalogIn57644AlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.15
wtWebGraphAnalogIn57644AlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.16
wtWebGraphAnalogIn57644AlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.17
wtWebGraphAnalogIn57644AlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.18
wtWebGraphAnalogIn57644AlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.19
wtWebGraphAnalogIn57644AlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.20
wtWebGraphAnalogIn57644Alarm2Minmandatory Minimum rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.21
wtWebGraphAnalogIn57644Alarm2Maxmandatory Maximum rel.Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.22
wtWebGraphAnalogIn57644Alarm2Hysteresismandatory Hysterese rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.23
wtWebGraphAnalogIn57644AlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.24
wtWebGraphAnalogIn57644AlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.25
wtWebGraphAnalogIn57644AlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.26
wtWebGraphAnalogIn57644AlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.27
wtWebGraphAnalogIn57644AlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.28
wtWebGraphAnalogIn57644AlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.29
wtWebGraphAnalogIn57644AlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.30
wtWebGraphAnalogIn57644AlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.31
wtWebGraphAnalogIn57644AlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.32
wtWebGraphAnalogIn57644AlarmTimerCronmandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.33

List of sensor colors for the praphical presentation.

wtWebGraphAnalogIn57644SensorColor2Entry row .1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1

Numbers of the sensors.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebGraphAnalogIn57644GraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.1
wtWebGraphAnalogIn57644GraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3 : Use Scale 4 …	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.2

List of settings depending on the sensor number.

wtWebGraphAnalogIn57644PortEntry row .1.3.6.1.4.1.5040.1.2.12.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

No indexes recorded

Column	Syntax	OID
wtWebGraphAnalogIn57644PortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.1
wtWebGraphAnalogIn57644PortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.2
wtWebGraphAnalogIn57644PortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.3
wtWebGraphAnalogIn57644SetPoint1mandatory Offset calibration: set point 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.4
wtWebGraphAnalogIn57644PortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.5
wtWebGraphAnalogIn57644SetPoint2mandatory Offset calibration: set point 2 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.6
wtWebGraphAnalogIn57644PortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.7
wtWebGraphAnalogIn57644PortSensorSelectmandatory Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused Binary coded options for sensor 2: Octet 1: u…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.8
wtWebGraphAnalogIn57644PortUnitmandatory User scale: displayed unit.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.9
wtWebGraphAnalogIn57644PortScale0mandatory User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.10
wtWebGraphAnalogIn57644PortScale100mandatory User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.12.3.2.1.1.11