WebGraph-AnalogIn-57641-US-MIB Table View

List of sensors.

wtWebGraphAnalogIn57641SensorEntry row .1.3.6.1.4.1.5040.1.2.10.1.2.1

List of sensor numbers.

Indexes

wtWebGraphAnalogIn57641SensorNo

Column	Syntax	OID
wtWebGraphAnalogIn57641SensorNomandatory Sensor number.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5040.1.2.10.1.2.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphAnalogIn57641ValuesEntry row .1.3.6.1.4.1.5040.1.2.10.1.3.1

Measurement values of the sensors.

Indexes

wtWebGraphAnalogIn57641SensorNo

Column	Syntax	OID
wtWebGraphAnalogIn57641Valuesmandatory Measurement value of the sensor, ASCII, 7 characters in length.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.10.1.3.1.1

List of binary measurement values corresponding to the channel numbers.

wtWebGraphAnalogIn57641BinaryValuesEntry row .1.3.6.1.4.1.5040.1.2.10.1.4.1

Binary measurement values of the sensors.

Indexes

wtWebGraphAnalogIn57641SensorNo

Column	Syntax	OID
wtWebGraphAnalogIn57641BinaryValuesmandatory Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.10.1.4.1.1

List of sensor colors for the praphical presentation.

wtWebGraphAnalogIn57641SensorColorEntry row .1.3.6.1.4.1.5040.1.2.10.3.1.4.4.1

Index numbers of the sensors.

Indexes

wtWebGraphAnalogIn57641SensorNo

Column	Syntax	OID
wtWebGraphAnalogIn57641SensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.10.3.1.4.4.1.1

List of alarm indices.

wtWebGraphAnalogIn57641AlarmIfEntry row .1.3.6.1.4.1.5040.1.2.10.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebGraphAnalogIn57641AlarmNo

Column	Syntax	OID
wtWebGraphAnalogIn57641AlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.10.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebGraphAnalogIn57641AlarmEntry row .1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebGraphAnalogIn57641AlarmNo

Column	Syntax	OID
wtWebGraphAnalogIn57641AlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.1
wtWebGraphAnalogIn57641AlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.2
wtWebGraphAnalogIn57641AlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.3
wtWebGraphAnalogIn57641AlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.4
wtWebGraphAnalogIn57641AlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.5
wtWebGraphAnalogIn57641AlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.6
wtWebGraphAnalogIn57641AlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.7
wtWebGraphAnalogIn57641AlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.8
wtWebGraphAnalogIn57641AlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.9
wtWebGraphAnalogIn57641AlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.10
wtWebGraphAnalogIn57641AlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.11
wtWebGraphAnalogIn57641AlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.12
wtWebGraphAnalogIn57641AlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.13
wtWebGraphAnalogIn57641AlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.14
wtWebGraphAnalogIn57641AlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.15
wtWebGraphAnalogIn57641AlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.16
wtWebGraphAnalogIn57641AlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.17
wtWebGraphAnalogIn57641AlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.18
wtWebGraphAnalogIn57641AlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.19
wtWebGraphAnalogIn57641AlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.20
wtWebGraphAnalogIn57641Alarm2Minmandatory Minimum rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.21
wtWebGraphAnalogIn57641Alarm2Maxmandatory Maximum rel.Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.22
wtWebGraphAnalogIn57641Alarm2Hysteresismandatory Hysterese rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.23
wtWebGraphAnalogIn57641AlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.24
wtWebGraphAnalogIn57641AlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.25
wtWebGraphAnalogIn57641AlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.26
wtWebGraphAnalogIn57641AlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.27
wtWebGraphAnalogIn57641AlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.28
wtWebGraphAnalogIn57641AlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.29
wtWebGraphAnalogIn57641AlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.30
wtWebGraphAnalogIn57641AlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.31
wtWebGraphAnalogIn57641AlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.32
wtWebGraphAnalogIn57641AlarmTimerCronmandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.5.3.1.33

List of sensor colors for the praphical presentation.

wtWebGraphAnalogIn57641SensorColor2Entry row .1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebGraphAnalogIn57641SensorNo

Column	Syntax	OID
wtWebGraphAnalogIn57641GraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1.1
wtWebGraphAnalogIn57641GraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3 : Use Scale 4 …	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.1.6.2.3.1.2

List of settings depending on the sensor number.

wtWebGraphAnalogIn57641PortEntry row .1.3.6.1.4.1.5040.1.2.10.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebGraphAnalogIn57641SensorNo

Column	Syntax	OID
wtWebGraphAnalogIn57641PortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.1
wtWebGraphAnalogIn57641PortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.2
wtWebGraphAnalogIn57641PortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.3
wtWebGraphAnalogIn57641SetPoint1mandatory Offset calibration: set point 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.4
wtWebGraphAnalogIn57641PortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.5
wtWebGraphAnalogIn57641SetPoint2mandatory Offset calibration: set point 2 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.6
wtWebGraphAnalogIn57641PortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.7
wtWebGraphAnalogIn57641PortSensorSelectmandatory Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7: unused Binary coded options for se…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.8
wtWebGraphAnalogIn57641PortUnitmandatory User scale: displayed unit.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.9
wtWebGraphAnalogIn57641PortScale0mandatory User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.10
wtWebGraphAnalogIn57641PortScale100mandatory User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.10.3.2.1.1.11