WebGraph-AnalogIO-57662-US-MIB Table View

List of sensors.

wtWebGraphAnalog57662SensorEntry row .1.3.6.1.4.1.5040.1.2.29.1.2.1

List of sensor numbers.

Indexes

wtWebGraphAnalog57662SensorNo

Column	Syntax	OID
wtWebGraphAnalog57662SensorNomandatory Sensor number.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5040.1.2.29.1.2.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphAnalog57662ValuesEntry row .1.3.6.1.4.1.5040.1.2.29.1.3.1

Measurement values of the sensors.

Indexes

wtWebGraphAnalog57662SensorNo

Column	Syntax	OID
wtWebGraphAnalog57662Valuesmandatory Measurement value of the sensor, ASCII. This value will be translated according to the ports settings for the read and write operations.	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.29.1.3.1.1

List of binary measurement values corresponding to the channel numbers.

wtWebGraphAnalog57662BinaryValuesEntry row .1.3.6.1.4.1.5040.1.2.29.1.4.1

Binary measurement values of the sensors.

Indexes

wtWebGraphAnalog57662SensorNo

Column	Syntax	OID
wtWebGraphAnalog57662BinaryValuesmandatory Binary measurement value of the sensor in 1/1000, signed number, 0x7FFFFFFF indicates an invalid value. This value will be translated according to the ports settings for the read and write operations.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.29.1.4.1.1

Table of indices.

wtWebGraphAnalog57662BinaryIfEntry row .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2.1

Indices of the binary channels.

Indexes

wtWebGraphAnalog57662BinaryModeNo

Column	Syntax	OID
wtWebGraphAnalog57662BinaryModeNomandatory Number of the binary channel.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2.1.1

Table of properties of the binary mode.

wtWebGraphAnalog57662BinaryEntry row .1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1

Binary properties.

Indexes

wtWebGraphAnalog57662BinaryModeNo

Column	Syntax	OID
wtWebGraphAnalog57662BinaryOperationModemandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.1
wtWebGraphAnalog57662BinaryTcpServerLocalPortmandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.2
wtWebGraphAnalog57662BinaryTcpServerInputTriggermandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.3
wtWebGraphAnalog57662BinaryTcpServerApplicationModemandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.4
wtWebGraphAnalog57662BinaryTcpClientLocalPortmandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.5
wtWebGraphAnalog57662BinaryTcpClientServerPortmandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.6
wtWebGraphAnalog57662BinaryTcpClientServerIpAddrmandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.7
wtWebGraphAnalog57662BinaryTcpClientServerPasswordmandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.8
wtWebGraphAnalog57662BinaryTcpClientInactivitymandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.9
wtWebGraphAnalog57662BinaryTcpClientInputTriggermandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10
wtWebGraphAnalog57662BinaryTcpClientIntervalmandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.11
wtWebGraphAnalog57662BinaryTcpClientApplicationModemandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.12
wtWebGraphAnalog57662BinaryUdpPeerLocalPortmandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.13
wtWebGraphAnalog57662BinaryUdpPeerRemotePortmandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.14
wtWebGraphAnalog57662BinaryUdpPeerRemoteIpAddrmandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.15
wtWebGraphAnalog57662BinaryUdpPeerInputTriggermandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.16
wtWebGraphAnalog57662BinaryUdpPeerIntervalmandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.17
wtWebGraphAnalog57662BinaryUdpPeerApplicationModemandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.18
wtWebGraphAnalog57662BinaryConnectedPortmandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.19
wtWebGraphAnalog57662BinaryConnectedIpAddrmandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.20
wtWebGraphAnalog57662BinaryTcpServerClientHttpPortmandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.21
wtWebGraphAnalog57662BinaryTcpClientServerHttpPortmandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.22
wtWebGraphAnalog57662BinaryTcpServerHysteresis1mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be t…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.23
wtWebGraphAnalog57662BinaryTcpServerHysteresis2mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be t…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.24
wtWebGraphAnalog57662BinaryTcpClientHysteresis1mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be t…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.25
wtWebGraphAnalog57662BinaryTcpClientHysteresis2mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be t…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.26
wtWebGraphAnalog57662BinaryUdpPeerHysteresis1mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be tra…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.27
wtWebGraphAnalog57662BinaryUdpPeerHysteresis2mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be tra…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.28

List of sensor colors for the praphical presentation.

wtWebGraphAnalog57662SensorColorEntry row .1.3.6.1.4.1.5040.1.2.29.3.1.4.4.1

Index numbers of the sensors.

Indexes

wtWebGraphAnalog57662SensorNo

Column	Syntax	OID
wtWebGraphAnalog57662SensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.29.3.1.4.4.1.1

List of alarm indices.

wtWebGraphAnalog57662AlarmIfEntry row .1.3.6.1.4.1.5040.1.2.29.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebGraphAnalog57662AlarmNo

Column	Syntax	OID
wtWebGraphAnalog57662AlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.29.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebGraphAnalog57662AlarmEntry row .1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebGraphAnalog57662AlarmNo

Column	Syntax	OID
wtWebGraphAnalog57662AlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.1
wtWebGraphAnalog57662AlarmMin1mandatory Minimum sensor 1 with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.2
wtWebGraphAnalog57662AlarmMax1mandatory Maximum sensor 1 with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.3
wtWebGraphAnalog57662AlarmHysteresis1mandatory Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.4
wtWebGraphAnalog57662AlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.5
wtWebGraphAnalog57662AlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.6
wtWebGraphAnalog57662AlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.7
wtWebGraphAnalog57662AlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.8
wtWebGraphAnalog57662AlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.9
wtWebGraphAnalog57662AlarmMailTextmandatory Alarm mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.10
wtWebGraphAnalog57662AlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.11
wtWebGraphAnalog57662AlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.12
wtWebGraphAnalog57662AlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.13
wtWebGraphAnalog57662AlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.14
wtWebGraphAnalog57662AlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.15
wtWebGraphAnalog57662AlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.16
wtWebGraphAnalog57662AlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.17
wtWebGraphAnalog57662AlarmClearMailTextmandatory Alarm clear mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.18
wtWebGraphAnalog57662AlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.19
wtWebGraphAnalog57662AlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.20
wtWebGraphAnalog57662AlarmMin2mandatory Minimum sensor 2 with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.21
wtWebGraphAnalog57662AlarmMax2mandatory Maximum sensor 2 with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.22
wtWebGraphAnalog57662AlarmHysteresis2mandatory Hysterese rel. sensor 2 with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.23
wtWebGraphAnalog57662AlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.24
wtWebGraphAnalog57662AlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.25
wtWebGraphAnalog57662AlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.26
wtWebGraphAnalog57662AlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.27
wtWebGraphAnalog57662AlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.28
wtWebGraphAnalog57662AlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.29
wtWebGraphAnalog57662AlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.30
wtWebGraphAnalog57662AlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.31
wtWebGraphAnalog57662AlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.32
wtWebGraphAnalog57662AlarmTimerCronmandatory This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.33

List of sensor colors for the praphical presentation.

wtWebGraphAnalog57662SensorColor2Entry row .1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebGraphAnalog57662SensorNo

Column	Syntax	OID
wtWebGraphAnalog57662GraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1.1
wtWebGraphAnalog57662GraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1.2

List of Report indices.

wtWebGraphAnalog57662ReportIfEntry row .1.3.6.1.4.1.5040.1.2.29.3.1.7.2.1

Numbers of the Reports.

Indexes

wtWebGraphAnalog57662ReportNo

Column	Syntax	OID
wtWebGraphAnalog57662ReportNomandatory Report number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.29.3.1.7.2.1.1

List of settings depending on the Report number.

wtWebGraphAnalog57662ReportEntry row .1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1

Report parameters of the individual Reports.

Indexes

wtWebGraphAnalog57662ReportNo

Column	Syntax	OID
wtWebGraphAnalog57662ReportEnablemandatory Bin?r kodierte Triggerbedingungen: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Report enable Bit 1-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.1
wtWebGraphAnalog57662ReportTimerCronmandatory This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.2
wtWebGraphAnalog57662ReportMethodeEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.3
wtWebGraphAnalog57662ReportEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.8
wtWebGraphAnalog57662ReportMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.9
wtWebGraphAnalog57662ReportMailTextmandatory Report mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.10
wtWebGraphAnalog57662ReportManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.11
wtWebGraphAnalog57662ReportTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.12
wtWebGraphAnalog57662ReportMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.13
wtWebGraphAnalog57662ReportTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.14
wtWebGraphAnalog57662ReportTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.15
wtWebGraphAnalog57662ReportTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.16
wtWebGraphAnalog57662ReportClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.17
wtWebGraphAnalog57662ReportClearMailTextmandatory Report clear mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.18
wtWebGraphAnalog57662ReportClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.19
wtWebGraphAnalog57662ReportClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.20
wtWebGraphAnalog57662ReportSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.24
wtWebGraphAnalog57662ReportSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.25
wtWebGraphAnalog57662ReportSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.26
wtWebGraphAnalog57662ReportSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.27
wtWebGraphAnalog57662ReportFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.28
wtWebGraphAnalog57662ReportFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.29
wtWebGraphAnalog57662ReportFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.30
wtWebGraphAnalog57662ReportFtpClearTextmandatory Report clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.31
wtWebGraphAnalog57662ReportFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.32

List of settings depending on the sensor number.

wtWebGraphAnalog57662PortEntry row .1.3.6.1.4.1.5040.1.2.29.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebGraphAnalog57662SensorNo

Column	Syntax	OID
wtWebGraphAnalog57662PortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.1
wtWebGraphAnalog57662PortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.2
wtWebGraphAnalog57662PortOffset1mandatory Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.3
wtWebGraphAnalog57662SetPoint1mandatory Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.4
wtWebGraphAnalog57662PortOffset2mandatory Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.5
wtWebGraphAnalog57662SetPoint2mandatory Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.6
wtWebGraphAnalog57662PortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.7
wtWebGraphAnalog57662PortSensorSelectmandatory Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.8
wtWebGraphAnalog57662PortUnitmandatory User scale: displayed unit.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.9
wtWebGraphAnalog57662PortScale0mandatory User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.10
wtWebGraphAnalog57662PortScale100mandatory User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.11
wtWebGraphAnalog57662PortOutputModemandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. If an output mode is selected, Bit 2 in wtWebGraphAnalog57662PortInputMode will be set automat…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.12
wtWebGraphAnalog57662PortInputModemandatory This binary coded input mode defines the individual operation mode for any input. More than one mode must not be selected. If an input mode is selected, Bit 5 in wtWebGraphAnalog57662PortOutputMode will be set automatic…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.13
wtWebGraphAnalog57662PortCompensationValuemandatory This entry is used to optimize the step response with capcitive loads.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.14
wtWebGraphAnalog57662PortCompensationModemandatory This binary coded compensation mode defines the individual operation mode for any output. If Auto adaptive is selected, the optimal value of wtWebGraphAnalog57662PortCompensationValue will be determinate continuously. S…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.29.3.2.1.1.15