WWP-LEOS-TRAFFIC-PROFILE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
19
Rows
19
Columns
108
.1.3.6.1.4.1.6141.2.60.27.1.1.2 · 1 row entry · 10 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfilePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfilePortTable'
A table of traffic profile port entries.
wwpLeosTrafficProfilePortEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.2.1
A traffic profile entry in the wwpLeosTrafficProfilePortTable.
Column Syntax OID
wwpLeosTrafficProfilePortThis object specifies the port number also used as index in
the table.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.1
wwpLeosTrafficProfileAdminStateSetting this object to 'enabled' will administratively enable traffic profiling on the given port.
Setting this object to 'disabled' will administratively disable traffic profiling on the given port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.2
wwpLeosTrafficProfileOperStateThis object specifies operational state of the traffic profiling for a given port
on the device.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.3
wwpLeosTrafficProfileModeThis object specifies the mode of traffic profiling for a given port.Enumerationr/w
Enumerated Values:
1cascadedDot1dPri
2cascadedDscp
3cascadedIpPrec
4stdDot1
5stdDiffServ
6stdIpPrec
7stdVlan
8stdDscp
9stdVlanDot1DPri
10stdVlanIpp
11stdVlanDscp
12hierarchicalVlan
13hierarchicalPort
14none
15advanced
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.4
This object specifies that the device should map non-conformance traffic ingressing
on a given port to cascaded profile specified by
wwpLeosTrafficProfileNonConformCascadedProfile. This object will become effective
onl…
Enumerationr/w
Enumerated Values:
0drop
1profile1
2profile2
3profile3
4deprecated
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.5
wwpLeosTrafficProfileNonConformStdProfileThis object specifies that the device should map non-conformance traffic ingressing
on a given port to standard profile specified by
wwpLeosTrafficProfileNonConformStdProfile. This object will become effective
only if …
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.6
This object specifies that the device should map ARP frames ingressing
on a given port to cascaded profile specified by
wwpLeosTrafficProfileArpCascadedProfile. This object will be set to bypass
if using on a device th…
Enumerationr/w
Enumerated Values:
0bypass
1profile1
2profile2
3profile3
4deprecated
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.7
wwpLeosTrafficProfileArpStdProfileThis object specifies that the device should map ARP frames ingressing
on a given port to standard profile specified by
wwpLeosTrafficProfileArpStdProfile. This object will become effective
only if device is running in…
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.8
wwpLeosTrafficProfileMeterPoolThis object specifies the Meter Pool Index for a port.Integer32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.9
wwpLeosTrafficProfileClassifierModeThis object specifies how narrow or wide we classify traffic to a port's meters.Enumerationr/w
Enumerated Values:
1narrow
2wide
.1.3.6.1.4.1.6141.2.60.27.1.1.2.1.10
.1.3.6.1.4.1.6141.2.60.27.1.1.3 · 1 row entry · 4 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileCascadedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileCascadedTable'
A table of cascaded traffic profile entries.
To create an entry in this table the following criteria must be met.
- All indexes must be specified.
- wwpLeosTrafficProfileCascadedCir must be specified
- if wwpLeosTrafficProfileCascadedPir is not specified or is specified and is < wwpLeosTrafficProfileCascadedCir
  then device will make wwpLeosTrafficProfileCascadedPir = wwpLeosTrafficProfileCascadedCir
- wwpLeosTrafficProfileCascadedStatus must be set to createandgo
wwpLeosTrafficProfileCascadedEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.3.1
A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedTable.
Column Syntax OID
This object is used as index in the table and it represents
profile index which can be 1 or 2 or 3.
Integer32
Constraints:
range: 1-3
.1.3.6.1.4.1.6141.2.60.27.1.1.3.1.1
This object specifies the cir associated with a given cascaded traffic profile.
Units are kbps.
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.3.1.2
This object specifies the pir associated with a given cascaded traffic profile.
Units are kbps.
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.3.1.3
Setting this object to 'createandgo' along with wwpLeosTrafficProfileCascadedCir
and wwpLeosTrafficProfileCascadedPir will result in creating an cascaded traffic profile entry.
Setting this object to 'destroy' will dele…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.3.1.5
.1.3.6.1.4.1.6141.2.60.27.1.1.4 · 1 row entry · 24 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdTable'
A table of Std traffic profile entries.
To create entry in this table following criteria must be met.
- All indexes must be specified.
- wwpLeosTrafficProfileStdCir must be specified
- if wwpLeosTrafficProfileStdPir is not specified or is specified and is < wwpLeosTrafficProfileStdCir
  then device will make wwpLeosTrafficProfileStdPir = wwpLeosTrafficProfileStdCir
- wwpLeosTrafficProfileStdStatus must be set to createandgo
wwpLeosTrafficProfileStdEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.4.1
A standard traffic profile entry in the wwpLeosTrafficProfileStdTable.
Column Syntax OID
wwpLeosTrafficProfileStdIndxThis object is used as index in the table and it represents
profile index which can be 1 through 64.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.1
wwpLeosTrafficProfileStdCirThis object specifies the cir associated with a given standard traffic profile.kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.2
wwpLeosTrafficProfileStdPirThis object specifies the pir associated with a given standard traffic profile.kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.3
wwpLeosTrafficProfileStdNameThe name associated with this profile. This must be unique per port.
The name does not have to be set on create. However, when updating the name,
it must have some value - zero-string not support.
OctetStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.4
wwpLeosTrafficProfileStdStatusSetting this object to 'createandgo' along with wwpLeosTrafficProfileStdCir
and or wwpLeosTrafficProfileStdPir will result in creating an standard traffic profile entry.
Setting this object to 'destroy' will delete the …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.5
wwpLeosTrafficProfileStdVlanThis object specifies the VLAN associated with a profile.Integer32r/w
Constraints:
range: 1-4095
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.6
wwpLeosTrafficProfileStdCbsThis object specifies the Commited burst size associated with a given
standard traffic profile.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.7
wwpLeosTrafficProfileStdEbsThis object specifies the Excess burst size associated with a given
standard traffic profile.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.8
wwpLeosTrafficProfileStdDscpRemarkPolicyLeave => Don't remark the frame.
Fixed => Remark the DSCP of a frame with the fixed-dscp value for IP frames
which classify to the Traffic Profile
Enumerationr/w
Enumerated Values:
1leave
2fixed
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.9
wwpLeosTrafficProfileStdFixedDscpFixed DSCP value to use for frames classifying to a Traffic Profile
when the dscp-remark-policy id 'Fixed
Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.10
wwpLeosTrafficProfileStdUnsetVlanSetting This object to unset(1) unsets the VLAN associated with a profile.
This object returns a value of none(0) on get.
Enumerationr/w
Enumerated Values:
0none
1unset
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.11
wwpLeosTrafficProfileStdDefaultProfileSetting this object to true(1) during createAndGo(4) will create Tier-1 default profile.Enumerationr/w
Enumerated Values:
1true
2false
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.12
wwpLeosTrafficeProfileStdDropSetting this value to true causes metering to cease and all traffic to drop.Enumerationr/w
Enumerated Values:
1true
2false
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.13
wwpLeosTrafficProfileStdParentIndexThis mib object is set when creating Child traffic profile to specify the parent indexSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.14
wwpLeosTrafficProfileStdChildModeWhen the port mode is hierarchical-vlan, then the valid child-modes are dot1dPri, ipprec, dscp.
When the port mode is hierarchical-port then the valid childModes is dot1dPri, ipprec, dscp and vlan(4).
Enumerationr/w
Enumerated Values:
1dot1dPri
2ipprec
3dscp
4vlan
5vlanCos
99none
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.15
wwpLeosTrafficProfileStdStatsMonitorTo disable stats collection, set this object to off(2).
To enable stats collection, set this object to on(1).
Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.16
wwpLeosTrafficProfileStdUntaggedStateTo enable this profile to match untagged traffic set this to on(1). To disable, set to off(2)Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.17
wwpLeosTrafficProfileStdVsThe virtual-switch name associated with this profile. The virtual-switch name must
exist before using it as a profile classifier.
OctetStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.18
wwpLeosTrafficProfileStdRemarkColorPolicyThis sets the profile's color remarking policy at the meter output.Enumerationr/w
Enumerated Values:
1leave
2yellowRemarkToGreen
3greenRemarkToYellow
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.19
wwpLeosTrafficProfileStdRemarkRcosPolicyThis sets the profile's rcos remarking policy based on meter color.Enumerationr/w
Enumerated Values:
1leave
2remarkGreen
3remarkYellow
4remarkBoth
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.20
wwpLeosTrafficProfileStdYellowRemarkRcosThis sets the profile's rcos remarking policy based on meter color.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.21
wwpLeosTrafficProfileStdGreenRemarkRcosThis sets the profile's rcos remarking policy based on meter color.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.22
wwpLeosTrafficProfileStdIngressColorAwareThis sets the profile's meter ingress color awareness.Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.23
wwpLeosTrafficProfileStdEirThis object specifies the eir associated with a given standard traffic profile.
Sets/Gets on this are only valid when the global meter-provisioning mode is set
to eir. All other times it will be ignored and return 0
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.4.1.24
.1.3.6.1.4.1.6141.2.60.27.1.1.5 · 1 row entry · 3 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdDot1dTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdDot1dTable'
A table of Std dot1d traffic profile entries.	      
To create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'. 
- set wwpLeosTrafficProfileStdDot1dToProfile to valid profile.
          
To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.
wwpLeosTrafficProfileStdDot1dEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.5.1
A standard dot1d traffic profile entry in the wwpLeosTrafficProfileStdDot1dTable.
Column Syntax OID
wwpLeosTrafficProfileStdDot1dThis object specifies the dot1d priority for the associated
standard profile entry in the wwpLeosTrafficProfileStdDot1dTable
table.
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.6141.2.60.27.1.1.5.1.1
wwpLeosTrafficProfileStdDot1dToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdDot1d
must be mapped to.
Integer32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.6141.2.60.27.1.1.5.1.2
wwpLeosTrafficProfileStdDot1dStatusTo create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'.
- set wwpLeosTrafficProfileStdDot1dToProfile to valid profile.

To delete entry set …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.5.1.3
.1.3.6.1.4.1.6141.2.60.27.1.1.6 · 1 row entry · 3 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdIpPrecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdIpPrecTable'
A table of standard ip precedence traffic profile entries.
To create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdIpPrecStatus to 'createandgo'. 
- set wwpLeosTrafficProfileStdIpPrecToProfile to valid profile.
          
To delete entry set wwpLeosTrafficProfileStdIpPrecStatus to destroy.
wwpLeosTrafficProfileStdIpPrecEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.6.1
A standard ip precedence traffic profile entry in the wwpLeosTrafficProfileStdTable.
Column Syntax OID
wwpLeosTrafficProfileStdIpPrecThis object specifies the ip precedence for the associated
standard profile entry in wwpLeosTrafficProfileStdTable.
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.6141.2.60.27.1.1.6.1.1
wwpLeosTrafficProfileStdIpPrecToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdIpPrec
must be mapped to.
Integer32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.6141.2.60.27.1.1.6.1.2
wwpLeosTrafficProfileStdIpPrecStatusTo create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdIpPrecStatus to 'createandgo'.
- set wwpLeosTrafficProfileStdIpPrecToProfile to valid profile.

To delete entry se…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.6.1.3
.1.3.6.1.4.1.6141.2.60.27.1.1.7 · 1 row entry · 3 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdPhbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdPhbTable'
A table of standard phb traffic profile entries.
To create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdPhbStatus to 'createandgo'. 
- set wwpLeosTrafficProfileStdPhbToProfile to valid profile.
          
To delete entry set wwpLeosTrafficProfileStdPhbStatus to destroy.
wwpLeosTrafficProfileStdPhbEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.7.1
A standard Phb traffic profile entry in the wwpLeosTrafficProfileStdTable.
Column Syntax OID
wwpLeosTrafficProfileStdPhbThis object specifies the diff-serv values for the associated
standard profile entry in wwpLeosTrafficProfileStdTable.
Enumeration
Enumerated Values:
1cs0
2cs1
3cs2
4cs3
5cs4
6cs5
7cs6
8cs7
9af1
10af2
11af3
12af4
13ef
.1.3.6.1.4.1.6141.2.60.27.1.1.7.1.1
wwpLeosTrafficProfileStdPhbToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdPhb
must be mapped to.
Integer32r/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6141.2.60.27.1.1.7.1.2
wwpLeosTrafficProfileStdPhbStatusTo create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdPhbStatus to 'createandgo'.
- set wwpLeosTrafficProfileStdPhbToProfile to valid profile.

To delete entry set wwpL…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.7.1.3
.1.3.6.1.4.1.6141.2.60.27.1.1.8 · 1 row entry · 6 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileCascadedStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileCascadedStatsTable'
A table of cascaded profile stats.
wwpLeosTrafficProfileCascadedStatsEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.8.1
A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedStatsTable.
Column Syntax OID
This object specifies the higher bytes of accepted frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.8.1.1
This object specifies the lower bytes of accepted frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.8.1.2
This object specifies the higher bytes of dropped frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.8.1.3
This object specifies the lower bytes of dropped frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.8.1.4
This object specifies the higher bytes of remarked frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.8.1.5
This object specifies the lower bytes of remarked frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.8.1.6
.1.3.6.1.4.1.6141.2.60.27.1.1.9 · 1 row entry · 8 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdStatsTable'
A table of standard profile stats.
wwpLeosTrafficProfileStdStatsEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.9.1
The entry in wwpLeosTrafficProfileStdStatsTable.
Column Syntax OID
wwpLeosTrafficProfileStdAcceptedBytesHiThis object specifies the higher bytes of accepted frames of
given standard profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.9.1.1
wwpLeosTrafficProfileStdAcceptedBytesLoThis object specifies the lower bytes of accepted frames of
given standard profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.9.1.2
wwpLeosTrafficProfileStdDroppedBytesHiThis object specifies the higher bytes of dropped frames of
given standard profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.9.1.3
wwpLeosTrafficProfileStdDroppedBytesLoThis object specifies the higher bytes of dropped frames of
given standard profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.9.1.4
wwpLeosTrafficProfileStdHCAcceptedBytesThis object specifies the bytes of accepted frame data by a
given standard profile.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6141.2.60.27.1.1.9.1.5
wwpLeosTrafficProfileStdHCDroppedBytesThis object specifies the bytes of dropped frame data by a
given standard profile.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6141.2.60.27.1.1.9.1.6
wwpLeosTrafficProfileStdHCAcceptedPacketsThis object specifies the number of packets passed by a standard profileSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6141.2.60.27.1.1.9.1.7
wwpLeosTrafficProfileStdHCDroppedPacketsThis object specifies the number of packets dropped by a standard profileSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6141.2.60.27.1.1.9.1.8
.1.3.6.1.4.1.6141.2.60.27.1.1.10 · 1 row entry · 5 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileCascadedGlobalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileCascadedGlobalTable'
A table of global attributes used by cascaded traffic profile table.
To create entry in this table following criteria must be met.
- All indexes must be specified.
- wwpLeosTrafficProfileCascadedGlobalDot1d,wwpLeosTrafficProfileCascadedGlobalIpPrec and 
  wwpLeosTrafficProfileCascadedGlobalDscp may be specified.
- wwpLeosTrafficProfileCascadedGlobalName may be specified.
- wwpLeosTrafficProfileCascadedGlobalStatus must be set to createandgo
wwpLeosTrafficProfileCascadedGlobalEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.10.1
A global cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedGlobalTable.
Column Syntax OID
This specifies the dot1d priority for a given cascaded traffic profile.
If this object returns -1 then it means the value was not set by user
and thus doesn't care.
Integer32r/w
Constraints:
range: -1-7
.1.3.6.1.4.1.6141.2.60.27.1.1.10.1.1
This specifies the ip precedence value for a given cascaded traffic profile.
If this object returns -1 then it means the value was not set by user
and thus doesn't care.
Integer32r/w
Constraints:
range: -1-7
.1.3.6.1.4.1.6141.2.60.27.1.1.10.1.2
This specifies the dscp value for a given cascaded traffic profile.
If this object returns -1 then it means the value was not set by user
and thus doesn't care.
Integer32r/w
Constraints:
range: -1-63
.1.3.6.1.4.1.6141.2.60.27.1.1.10.1.3
The name associated with this profile. This must be unique name per profile.
The name does not have to be set on create. However, when updating the name,
it must have some value - zero-string not support.
OctetStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.6141.2.60.27.1.1.10.1.4
Setting this object to 'createandgo' will result in creating an global
cascaded traffic profile entry.
Setting this object to 'destroy' will delete the entry from the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.10.1.5
.1.3.6.1.4.1.6141.2.60.27.1.1.11 · 1 row entry · 6 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileCascadedTotalStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileCascadedTotalStatsTable'
A table of cascaded profile stats.
wwpLeosTrafficProfileCascadedTotalStatsEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.11.1
A cascaded traffic profile entry in the wwpLeosTrafficProfileCascadedTotalStatsTable.
Column Syntax OID
This object specifies the higher bytes of accepted frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.11.1.1
This object specifies the lower bytes of accepted frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.11.1.2
This object specifies the higher bytes of dropped frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.11.1.3
This object specifies the lower bytes of dropped frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.11.1.4
This object specifies the higher bytes of remarked frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.11.1.5
This object specifies the lower bytes of remarked frames of
given cascaded profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.11.1.6
.1.3.6.1.4.1.6141.2.60.27.1.1.12 · 1 row entry · 4 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdTotalStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdTotalStatsTable'
A table of standard profile stats.
wwpLeosTrafficProfileStdTotalStatsEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.12.1
The entry in wwpLeosTrafficProfileStdTotalStatsTable.
Column Syntax OID
wwpLeosTrafficProfileStdTotalAcceptedBytesHiThis object specifies the higher bytes of accepted frames of
given standard profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.12.1.1
wwpLeosTrafficProfileStdTotalAcceptedBytesLoThis object specifies the lower bytes of accepted frames of
given standard profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.12.1.2
wwpLeosTrafficProfileStdTotalDroppedBytesHiThis object specifies the higher bytes of dropped frames of
given standard profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.12.1.3
wwpLeosTrafficProfileStdTotalDroppedBytesLoThis object specifies the higher bytes of dropped frames of
given standard profile.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.27.1.1.12.1.4
.1.3.6.1.4.1.6141.2.60.27.1.1.14 · 1 row entry · 3 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdVlanTable'
A table of Std Vlan Traffic Profile Entries.
To create entry in the table following criteria must be met
-- set wwpLeosTrafficProfileStdVlanStatus to 'createandgo'.
-- set wwpLeosTrafficProfileStdVlan to valid profile.
          
To delete entry set wwpLeosTrafficProfileStdVlanStatus to destroy.
wwpLeosTrafficProfileStdVlanEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.14.1
A standard Dscp traffic profile entry in the wwpLeosTrafficProfileStdTable.
Column Syntax OID
wwpLeosTrafficProfileStdVlanIndexThis object specifies the Vlan for the associated
standard profile entry in wwpLeosTrafficProfileStdTable.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6141.2.60.27.1.1.14.1.1
wwpLeosTrafficProfileStdVlanToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdVlan
must be mapped to.
Integer32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.6141.2.60.27.1.1.14.1.2
wwpLeosTrafficProfileStdVlanStatusTo create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdVlanStatus to 'createandgo'.
- set wwpLeosTrafficProfileStdVlanToProfile to valid profile.

To delete entry set ww…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.14.1.3
.1.3.6.1.4.1.6141.2.60.27.1.1.15 · 1 row entry · 3 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdDscpTable'
A table of standard Dscp traffic profile entries.
To create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdDscpStatus to 'createandgo'. 
- set wwpLeosTrafficProfileStdDscpToProfile to valid profile.
          
To delete entry set wwpLeosTrafficProfileStdDscpStatus to destroy.
wwpLeosTrafficProfileStdDscpEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.15.1
A standard Dscp traffic profile entry in the wwpLeosTrafficProfileStdTable.
Column Syntax OID
wwpLeosTrafficProfileStdDscpThis object specifies the Dscp for the associated
standard profile entry in wwpLeosTrafficProfileStdTable.
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.6141.2.60.27.1.1.15.1.1
wwpLeosTrafficProfileStdDscpToProfileThis object specifies the profile to which wwpLeosTrafficProfileStdDscp
must be mapped to.
Integer32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.6141.2.60.27.1.1.15.1.2
wwpLeosTrafficProfileStdDscpStatusTo create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdDscpStatus to 'createandgo'.
- set wwpLeosTrafficProfileStdDscpToProfile to valid profile.

To delete entry set ww…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.15.1.3
.1.3.6.1.4.1.6141.2.60.27.1.1.16 · 1 row entry · 8 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileMeterPoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileMeterPoolTable'
A Table of Meter Pool
wwpLeosTrafficProfileMeterPoolEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.16.1
A Meter Pool Entry in wwpLeosTrafficProfileMeterPoolTable
Column Syntax OID
wwpLeosTrafficProfileMeterPoolIndexA Meter Pool IndexInteger32
Constraints:
range: 1-8
.1.3.6.1.4.1.6141.2.60.27.1.1.16.1.1
wwpLeosTrafficProfileMeterPoolNameA Meter Pool NameOctetString
Constraints:
range: 0-15
.1.3.6.1.4.1.6141.2.60.27.1.1.16.1.2
wwpLeosTrafficProfileMeterPoolNumOfMetersNumber of Meters for a poolSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.16.1.3
wwpLeosTrafficProfileMeterPoolMetersUsedNumber of Used Meters in a PoolSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.16.1.4
wwpLeosTrafficProfileMeterPoolNumOfStatsNumber of Stats Counters for a poolSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.16.1.5
wwpLeosTrafficProfileMeterPoolStatsUsedNumber of Used Stats Counters in a PoolSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.16.1.6
wwpLeosTrafficProfileMeterPoolNumOfClassifiersNumber of Classifiers for a poolSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.16.1.7
wwpLeosTrafficProfileMeterPoolClassifiersUsedNumber of Used Classifiers in a PoolSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.27.1.1.16.1.8
.1.3.6.1.4.1.6141.2.60.27.1.1.20 · 1 row entry · 2 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileTosStampTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileTosStampTable'
A table of TosStamps entries.
wwpLeosTrafficProfileTosStampEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.20.1
The entry in wwpLeosTrafficProfileTosStampTable.
Column Syntax OID
wwpLeosTrafficProfileTosStampStateThis object specifies the state of the TOS Stamp on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.20.1.1
wwpLeosTrafficProfileTosStampValueThis object specifies the Value of the TOS Stamp. For IP
prec left shift the value by 3 bits.
Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.6141.2.60.27.1.1.20.1.2
.1.3.6.1.4.1.6141.2.60.27.1.1.21 · 1 row entry · 13 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileIpDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileIpDscpTable'
A table of IpDscp entries.
wwpLeosTrafficProfileIpDscpEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.21.1
The entry in wwpLeosTrafficProfileIpDscpTable.
Column Syntax OID
wwpLeosTrafficProfileIpp0Cs0StateThis object specifies the state of the Ipp0 or cs0 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.1
wwpLeosTrafficProfileIpp1Cs1StateThis object specifies the state of the Ipp1 or cs1 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.2
wwpLeosTrafficProfileIpp2Cs2StateThis object specifies the state of the Ipp0 or cs0 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.3
wwpLeosTrafficProfileIpp3Cs3StateThis object specifies the state of the Ipp3 or cs3 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.4
wwpLeosTrafficProfileIpp4Cs4StateThis object specifies the state of the Ipp4 or cs4 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.5
wwpLeosTrafficProfileIpp5Cs5StateThis object specifies the state of the Ipp5 or cs5 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.6
wwpLeosTrafficProfileIpp6Cs6StateThis object specifies the state of the Ipp6 or cs6 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.7
wwpLeosTrafficProfileIpp7Cs7StateThis object specifies the state of the Ipp7 or cs7 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.8
wwpLeosTrafficProfileAf1StateThis object specifies the state of the Af1 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.9
wwpLeosTrafficProfileAf2StateThis object specifies the state of the Af2 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.10
wwpLeosTrafficProfileAf3StateThis object specifies the state of the Af3 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.11
wwpLeosTrafficProfileAf4StateThis object specifies the state of the Af4 enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.12
wwpLeosTrafficProfileEfStateThis object specifies the state of the Ef enable disable on a portEnumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.27.1.1.21.1.13
.1.3.6.1.4.1.6141.2.60.27.1.1.40 · 1 row entry · 1 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdVlanDot1dTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdVlanDot1dTable'
A table of Std Vlan dot1d traffic profile entries.	      
To create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'.
          
To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.
wwpLeosTrafficProfileStdVlanDot1dEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.40.1
A standard dot1d traffic profile entry in the wwpLeosTrafficProfileStdDot1dTable.
Column Syntax OID
wwpLeosTrafficProfileStdVlanDot1dStatusTo create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdDot1dStatus to 'createandgo'.

To delete entry set wwpLeosTrafficProfileStdDot1dStatus to destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.40.1.1
.1.3.6.1.4.1.6141.2.60.27.1.1.41 · 1 row entry · 1 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdVlanIpPrecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdVlanIpPrecTable'
A table of Std Vlan-Ip prec traffic profile entries.	      
To create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createandgo'.	      
To delete entry set wwpLeosTrafficProfileStdVlanIpPrecStatus to destroy.
wwpLeosTrafficProfileStdVlanIpPrecEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.41.1
A standard vlan-Ip prec traffic profile entry in the wwpLeosTrafficProfileStdVlanIpPrecTable.
Column Syntax OID
wwpLeosTrafficProfileStdVlanIpPrecStatusTo create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdVlanIpPrecStatus to 'createandgo'.
To delete entry set wwpLeosTrafficProfileStdVlanIpPrecStatus to destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.41.1.1
.1.3.6.1.4.1.6141.2.60.27.1.1.42 · 1 row entry · 1 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTrafficProfileStdVlanDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-TRAFFIC-PROFILE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-TRAFFIC-PROFILE-MIB::wwpLeosTrafficProfileStdVlanDscpTable'
A table of Std Vlan-dscp traffic profile entries.	      
To create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdVlanDscpStatus to 'createandgo'.
          
To delete entry set wwpLeosTrafficProfileStdVlanDscpStatus to destroy.
wwpLeosTrafficProfileStdVlanDscpEntry row .1.3.6.1.4.1.6141.2.60.27.1.1.42.1
A standard vlan-dscp traffic profile entry in the wwpLeosTrafficProfileStdVlanDscpTable.
Column Syntax OID
wwpLeosTrafficProfileStdVlanDscpStatusTo create entry in the table following criteria must be met
- set wwpLeosTrafficProfileStdVlanDscpStatus to 'createandgo'.

To delete entry set wwpLeosTrafficProfileStdVlanDscpStatus to destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.27.1.1.42.1.2