WWP-LEOS-SYSTEM-CONFIG-MIB Table View

The (conceptual) table listing the default gateways

wwpLeosSystemConfigDefaultGatewayEntry row .1.3.6.1.4.1.6141.2.60.12.1.1.10.1

An entry (conceptual row) in the wwpLeosSystemConfigDefaultGatewayTable.

Indexes

wwpLeosSystemConfigDefaultGatewayIndex

Column	Syntax	OID
wwpLeosSystemConfigDefaultGatewayIndex Unique identifier to the table.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1
wwpLeosSystemConfigDefaultGatewayInetAddrType The Inet address type of default gateway. Used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddr…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2
wwpLeosSystemConfigDefaultGatewayInetAddress Default gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, ww…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3
wwpLeosSystemConfigDefaultGatewayInterfaceName Interface Name of the gateway, local or remote.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4
wwpLeosSystemConfigDefaultGatewayMetric Metric of the gateway.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5
wwpLeosSystemConfigDefaultGatewayStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6

The (conceptual) table listing the default gateways

wwpLeosSystemConfigBackupGatewayEntry row .1.3.6.1.4.1.6141.2.60.12.1.1.11.1

An entry (conceptual row) in the wwpLeosSystemConfigBackupGatewayTable.

Indexes

wwpLeosSystemConfigBackupGatewayIndex

Column	Syntax	OID
wwpLeosSystemConfigBackupGatewayIndex Unique identifier to the table.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1
wwpLeosSystemConfigBackupGatewayInetAddrType The Inet address type of backup gateway. Used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddress…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2
wwpLeosSystemConfigBackupGatewayInetAddress Backup gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpL…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3
wwpLeosSystemConfigBackupGatewayInterfaceName Interface Name of the gateway, local or remote.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4
wwpLeosSystemConfigBackupGatewayMetric Metric of the gateway.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5
wwpLeosSystemConfigBackupGatewayStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6

The (conceptual) table listing the configs

wwpLeosSystemConfigFileEntry row .1.3.6.1.4.1.6141.2.60.12.1.2.4.1

An entry (conceptual row) in the wwpLeosSystemConfigFileTable.

Indexes

wwpLeosSystemConfigFileIndex

Column	Syntax	OID
wwpLeosSystemConfigFileIndex Unique identifier to the table.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1
wwpLeosSystemConfigFileName The name of the Config file.	FileName Type Constraints: range: 1..64	.1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2
wwpLeosSystemConfigActivateFile Set this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName' config. If the operation was successful, this object performs the CLI equivalent to these commands and will return the status Settin…	Enumerationr/w Enumerated Values: 1 loadCfg 2 resetToCfg 3 none	.1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3

The (conceptual) table listing the configuration file line numbers.
This table is only used when sending wwpLeosImproperCmdInConfigFile
notification. No Get, GetNext or Set is allowed on this table.

wwpLeosSystemConfigNotifEntry row .1.3.6.1.4.1.6141.2.60.12.1.8.1.1

An entry (conceptual row) in the wwpLeosSystemConfigNotifTable.
No Get, GetNext or Set is allowed on this table.

Indexes

wwpLeosSystemConfigFileIndex

Column	Syntax	OID
wwpLeosSystemConfigErrLineNum The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the line number which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1
wwpLeosSystemConfigErrStr The OID is wwpLeosSystemConfigErrStr trap to identify the line which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2
wwpLeosSystemConfigErrLinesTotal The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the total line numbers which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3

Table of Memory Usage for various Memory Pools.

wwpLeosSystemMemoryUsageEntry row .1.3.6.1.4.1.6141.2.60.12.1.9.1.1

An entry for each Memory Pool.

Indexes

wwpLeosSystemMemoryUsagePoolIndex

Column	Syntax	OID
wwpLeosSystemMemoryUsagePoolIndex The Memory Pool type.	Enumeration Enumerated Values: 1 ose-pool-1 2 global-heap 3 malloc-heap	.1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1
wwpLeosSystemMemoryUsageMemoryTotal Total size of the Memory Pool in bytes.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2
wwpLeosSystemMemoryUsageMemoryLWM Lowest free memory in the Memory Pool in bytes. Not supported in SAOS 6.x	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3
wwpLeosSystemMemoryUsageMemoryFree Amount of free memory in the Memory Pool in bytes. This corresponds to the CLI's memory never used.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4
wwpLeosSystemMemoryUsageStatus Denotes if the free memory amount is normal or below limit.	Enumeration Enumerated Values: 1 normal 2 lowMemory 3 notSupported	.1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5
wwpLeosSystemMemoryUsageMemoryUsed Amount of used memory in the Memory Pool in bytes..	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6
wwpLeosSystemMemoryUsageMemoryAvailable Amount of available memory in the Memory Pool in bytes.	bytesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7

The (conceptual) table listing the default TFTP server

wwpLeosSystemXFtpTFtpServerEntry row .1.3.6.1.4.1.6141.2.60.12.1.10.8.1

An entry (conceptual row) in the wwpLeosSystemXFtpTFtpServerTable.

Indexes

wwpLeosSystemXFtpTFtpServerIndex

Column	Syntax	OID
wwpLeosSystemXFtpTFtpServerIndex Unique identifier to the table.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1
wwpLeosSystemXFtpTFtpServerHostName Host name or IP address of the default TFTP server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2
wwpLeosSystemXFtpTFtpServerRowStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the cur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6

The (conceptual) table listing the default FTP server

wwpLeosSystemXFtpFtpServerEntry row .1.3.6.1.4.1.6141.2.60.12.1.10.9.1

An entry (conceptual row) in the wwpLeosSystemXFtpFtpServerTable.

Indexes

wwpLeosSystemXFtpFtpServerIndex

Column	Syntax	OID
wwpLeosSystemXFtpFtpServerIndex Unique identifier to the table.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1
wwpLeosSystemXFtpFtpServerHostName Host name or IP address of the default FTP server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2
wwpLeosSystemXFtpFtpServerUserName User name / login ID to be used with the default FTP server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3
wwpLeosSystemXFtpFtpServerPassword Password to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4
wwpLeosSystemXFtpFtpServerSecret Password secret to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5
wwpLeosSystemXFtpFtpServerRowStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the cur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6

The (conceptual) table listing the default SFTP server

wwpLeosSystemXFtpSFtpServerEntry row .1.3.6.1.4.1.6141.2.60.12.1.10.10.1

An entry (conceptual row) in the wwpLeosSystemXFtpSFtpServerTable.

Indexes

wwpLeosSystemXFtpSFtpServerIndex

Column	Syntax	OID
wwpLeosSystemXFtpSFtpServerIndex Unique identifier to the table.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1
wwpLeosSystemXFtpSFtpServerHostName Host name or IP address of the default SFTP server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2
wwpLeosSystemXFtpSFtpServerUserName User name / login ID to be used with the default SFTP server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3
wwpLeosSystemXFtpSFtpServerPassword Password to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4
wwpLeosSystemXFtpSFtpServerSecret Password secret to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5
wwpLeosSystemXFtpSFtpServerRowStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the cur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6