WWP-LEOS-SYSLOG-COLLECTOR-MIB Table View

A table containing Syslog collector information.
To create entries in this table use SNMP multiple set 
operation.
          
wwpLeosSyslogCollectorAddr, wwpLeosSyslogIndex and 
wwpLeosSyslogCollectorStatus are required fields 
that needs to be set to create entry.
          
To delete entry set wwpLeosSyslogCollectorStatus to destroy.

wwpLeosSyslogCollectorEntry row .1.3.6.1.4.1.6141.2.60.21.1.2.1.1

Defines the information pertaining to a syslog collector
to which a syslog messages will be relayed.

Entries within this table with an access level of read-
create MUST be considered non-volatile and MUST b…

Indexes

wwpLeosSyslogIndex

Column	Syntax	OID
wwpLeosSyslogIndex Specifies the unique index used to represent each row in the table.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.1
wwpLeosSyslogCollectorAddr The address for the Syslog message collector. It can be Host Name or IP Address.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.2
wwpLeosSyslogCollectorResolvedAddr When wwpLeosSyslogCollectorAddr represents: Host name : The resolved address will either be Ipv4 address or Ipv6 address. Ipv4 address : The resolved address will be the same Ipv4 address. Ipv6 address : The resolve…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.3
wwpLeosSyslogCollectorUDPPort The port number on the destination to which the syslog message will be forwarded over the udp transport.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.4
wwpLeosSyslogCollectorFacility The syslog facility code that will be added to the messages forwarded to this collector.	SyslogFacilityr/w Type Values: 0 kernel 1 user 2 mail 3 daemon 4 auth 5 syslog 6 lpr 7 news 8 uucp 9 cron 10 authPriv 11 ftp 12 ntp 13 security 14 console 15 clockd2 16 local0 17 local1 18 local2 19 local3 20 local4 21 local5 22 local6 23 local7 24 noMap	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.5
wwpLeosSyslogCollectorMinSeveritydeprecated Any syslog message with a severity less than the severity specified by this object will be ignored by the collector. note: severity level numeric values increase as their severity decreases, e.g. error(3) is more severe…	SyslogSeverityr/w Type Values: 0 emergency 1 alert 2 critical 3 error 4 warning 5 notice 6 info 7 debug 99 other	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.6
wwpLeosSyslogCollectorMaxSeveritydeprecated Any syslog message with a severity greater than the severity specified by this object will be ignored by the collector. note: severity level numeric values increase as their severity decreases, e.g. error(3) is more se…	SyslogSeverityr/w Type Values: 0 emergency 1 alert 2 critical 3 error 4 warning 5 notice 6 info 7 debug 99 other	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.7
wwpLeosSyslogCollectorUserAdminState Specifies the admin state of the wwpLeosSyslogCollectorAddr configured by user.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.8
wwpLeosSyslogCollectorDhcpAdminState Specifies the admin state of the wwpLeosSyslogCollectorAddr configured by DHCP.	Enumeration Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.9
wwpLeosSyslogCollectorOperState Specifies the operational state of the wwpLeosSyslogCollectorAddr.	Enumeration Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.10
wwpLeosSyslogCollectorStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo' and specify at least wwpLeosSyslogIndex and wwpLeosSyslogColl…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.11
wwpLeosSyslogCollectorCustomPrefix Specifies the syslog custom prefix that will be prepended to all syslog log messages before device sends syslog messages to syslog collectors.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.12
wwpLeosSyslogCollectorResolvedInetAddrType Specifies the resolved IP address type . Used in conjunction with wwpLeosSyslogCollectorResolvedInetAddress. When set to : ipv4 : wwpLeosSyslogCollectorResolvedInetAddress should be compliant with InetAddressIP…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.13
wwpLeosSyslogCollectorResolvedInetAddress Specifies the resolved ip address for given wwpLeosSyslogCollectorAddr. If wwpLeosSyslogCollectorAddr is set to host name then wwpLeosSyslogCollectorResolvedInetAddr will display the resolved IP address. If wwpLeosSy…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6141.2.60.21.1.2.1.1.14

A table containing Syslog collector severity information.
To create entries in this table following objects must be specified.
- Indexes must be specified
- 
To delete entry set wwpLeosSyslogCollectorStatus to destroy.

wwpLeosSyslogCollectorSeverityEntry row .1.3.6.1.4.1.6141.2.60.21.1.2.2.1

Defines the information pertaining to a syslog collector severity
to which a syslog messages will be relayed. Syslog Collector will
only receive messages of severity that exist in this table.

Indexes

wwpLeosSyslogIndex wwpLeosSyslogCollectorSeverity

Column	Syntax	OID
wwpLeosSyslogCollectorSeverity This mib object specifies the severity of the syslog message that this collector should receive.	SyslogSeverity Type Values: 0 emergency 1 alert 2 critical 3 error 4 warning 5 notice 6 info 7 debug 99 other	.1.3.6.1.4.1.6141.2.60.21.1.2.2.1.1
wwpLeosSyslogCollectorSeverityRowStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete the entry set this to 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.60.21.1.2.2.1.2