WWP-LEOS-RADIUS-CLIENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
21

wwpLeosRadiusClientServerTable

table
.1.3.6.1.4.1.6141.2.60.20.1.1.6 · 1 row entry · 21 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosRadiusClientServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-RADIUS-CLIENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-RADIUS-CLIENT-MIB::wwpLeosRadiusClientServerTable' 
Lists the possible RADIUS servers. 
While creating entry following mib objects must be specified
wwpLeosRadiusClientServerStatus, wwpLeosRadiusClientServerAddr.
SNMP multiple set operation must be used to create entry.
wwpLeosRadiusClientServerEntry row .1.3.6.1.4.1.6141.2.60.20.1.1.6.1
Radius server entry.
Indexes
Column Syntax OID
wwpLeosRadiusClientServerIndex
Specifies the index of this table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.1
wwpLeosRadiusClientServerAddr
Host name or ip address of the RADIUS server.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.2
wwpLeosRadiusClientServerResolvedAddr
When wwpLeosRadiusClientServerAddr represents:
Host name : The resolved address will either be Ipv4 address or Ipv6 address.
Ipv4 address : The resolved address will be the same Ipv4 address.
Ipv6 address : The reso…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.3
wwpLeosRadiusClientServerPriority
Specifies the priority of radius servers configured on the device.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.4
wwpLeosRadiusClientServerAuthPort
The destination UDP port number to which RADIUS
messages should be sent. The RADIUS server will not be
used for authentication if this port number is 0.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.5
wwpLeosRadiusClientServerRoundTripTime
The time interval (in hundredths of a second) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that matched it from this RADIUS
authentication server.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.6
wwpLeosRadiusClientServerAccessRequests
The number of RADIUS Access-Request packets sent
to this server. This does not include retransmissions.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.7
wwpLeosRadiusClientServerAccessRetransmissions
The number of RADIUS Access-Request packets
retransmitted to this RADIUS authentication server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.8
wwpLeosRadiusClientServerAccessAccepts
The number of RADIUS Access-Accept packets
(valid or invalid) received from this server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.9
wwpLeosRadiusClientServerAccessRejects
The number of RADIUS Access-Reject packets
(valid or invalid) received from this server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.10
wwpLeosRadiusClientServerAccessChallenges
The number of RADIUS Access-Challenge packets
(valid or invalid) received from this server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.11
wwpLeosRadiusClientServerMalformedAccessResponses
The number of malformed RADIUS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
Signature attributes or unknown types are not
included as…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.12
wwpLeosRadiusClientServerBadAuthenticators
The number of RADIUS Access-Response packets
containing invalid authenticators or Signature
attributes received from this server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.13
wwpLeosRadiusClientServerPendingRequests
The number of RADIUS Access-Request packets
destined for this server that have not yet timed out
or received a response. This variable is incremented
when an Access-Request is sent and decremented due to
receipt of an A…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.14
wwpLeosRadiusClientServerTimeouts
The number of authentication timeouts to this server.
After a timeout the client may retry to the same
server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a t…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.15
wwpLeosRadiusClientServerUnknownTypes
The number of RADIUS packets of unknown type which
were received from this server on the authentication port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.16
wwpLeosRadiusClientServerPacketsDropped
The number of RADIUS packets of which were
received from this server on the authentication port
and dropped for some other reason.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.17
wwpLeosRadiusClientServerStatus
To create a row in this table, a manager must
set this object to createAndGo(4).

While creating entry the following mib objects must be specified
wwpLeosRadiusClientServerStatus, wwpLeosRadiusClientServe…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.18
wwpLeosRadiusClientServerApplication
This object specifies how the radius server should be used for authentication.
Whether this radius server should be used for userLogin authentication or dot1x authentication
or both is decided by the value of this mib …
Enumerationr/w
Enumerated Values:
1userLogin
2dot1x
3all
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.19
wwpLeosRadiusClientServerResolvedInetAddrType
Specifies the resolved IP address type. This OID is used in conjunction
with wwpLeosRadiusClientServerInetAddrress.
When set to :
ipv4 : wwpLeosRadiusClientServerInetAddress should be compliant with InetAddressIPv4
i…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.20
wwpLeosRadiusClientServerResolvedInetAddress
Specifies the resolved IP address if wwpLeosRadiusClientServerAddr is set to host name.
If wwpLeosRadiusClientServerAddr is set to ip address then
wwpLeosRadiusClientServerResolvedInetAddress will contain same informat…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6141.2.60.20.1.1.6.1.21