WWP-LEOS-PORT-XCVR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
86

wwpLeosPortXcvrTable

table
.1.3.6.1.4.1.6141.2.60.4.1.1.1 · 1 row entry · 86 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosPortXcvrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-PORT-XCVR-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-PORT-XCVR-MIB::wwpLeosPortXcvrTable' 
This table contains descriptions and settings for each of the 
physical transceiver devices.
wwpLeosPortXcvrEntry row .1.3.6.1.4.1.6141.2.60.4.1.1.1.1
The Transciever Device Entry.
Indexes
Column Syntax OID
wwpLeosPortXcvrId
The ID for the transceiver.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1
wwpLeosPortXcvrOperState
The operational state of the transceiver.
Enumeration
Enumerated Values:
1disabled
2enabled
3loopback
4notPresent
5faulted
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2
wwpLeosPortXcvrIdentiferType
Type for the transceiver.
Enumeration
Enumerated Values:
1unknown
2gbic
3solderedType
4sfp
5reserved
6vendorSpecific
7xbi
8xenpak
9xfp
10xff
11xfpe
12xpak
13x2
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3
wwpLeosPortXcvrExtIdentiferType
Extended identifier type for this transceiver.
Enumeration
Enumerated Values:
1unknown
2sfp-gbic
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4
wwpLeosPortXcvrConnectorType
Type of connector.
unknown(1),
sc(2),
fiberChannelStyle1(3),
fiberChannelStyle2(4),
bnc/tnc(5),
coaxialHeader(6),
fiberJack(7),
lc(8),
mt-rj(9),
mu(10),
sg(11),
opticalPitTail…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5
wwpLeosPortXcvrType
Type of Transceiver.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6
wwpLeosPortXcvrVendorName
String containing this transceiver's vendor name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7
wwpLeosPortXcvrVendorOUI
String containing this transceiver's vendor OUI.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8
wwpLeosPortXcvrVendorPN
String containing this transceiver's vendor OUI.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9
wwpLeosPortXcvrRevNum
String containing this transceiver's part revision number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10
wwpLeosPortXcvrSerialNum
String containing this transceiver's part serial number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11
wwpLeosPortXcvrEncodingType
If wwpLeosPortXcvrIdentiferType is SFP, then the following values is defined for the encoding type:
unspecified(1),
8B10B(2),
4b5b(3),
NRZ(4),
Manchester(5),
SONET(6),
reserved(7-256)
If wwpLeosPortXcvrIdentiferType is …
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12
wwpLeosPortXcvrMfgDate
The transceiver's manufacture date in string.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13
wwpLeosPortXcvrComplianceVer
This represents the compliance version.
Value 1 means digital diagnostic functionality
not included or undefined
Value 2 means includes functionality defined in
Rev 9.0 SFF-8472
Value 3 means TBD
Value 4 means TBD.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14
wwpLeosPortXcvrWaveLength
This represents the wavelength of the transceiver. Units are nano meter.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15
wwpLeosPortXcvrTemperature
This represents the temperature of the transceiver. Units are in degrees C
centigradeInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16
wwpLeosPortXcvrVcc
This represents the voltage of the transceiver.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17
wwpLeosPortXcvrBias
This represents the bias of the transceiver.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18
wwpLeosPortXcvrRxPower
This represents the measured receive power of the transceiver.
Units are micro Watts.
uWInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19
wwpLeosPortXcvrTxState
Indicates whether this transceiver is currently set to transmit.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20
wwpLeosPortXcvrTxFaultStatus
Indicates the fault status of this transceiver.
Enumeration
Enumerated Values:
1fault
2noFault
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21
wwpLeosPortXcvrRxRateStatus
Indicates the Rx rate status of this transceiver.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22
wwpLeosPortXcvr9by125um
Indicates the link length for 9/125um fiber.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23
wwpLeosPortXcvr50by125um
Indicates the link length for 50/125um fiber.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24
wwpLeosPortXcvr62dot5by125um
Indicates the link length for 62.5/125um fiber.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25
wwpLeosPortXcvrCu
Indicates the link length for copper.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26
wwpLeosPortXcvrTxOutputPw
Indicates the Tx Output power for the transceiver.
Units are micro Watts.
uWInteger32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27
wwpLeosPortXcvrLosState
Indicates the Loss Of Signal State for the optical transceiver.
Ports without optical transceiver will always report 'false'.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28
wwpLeosPortXcvrDiagSupported
Indicates if diagnostics are supported on this transceiver.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29
wwpLeosPortXcvrEnhDiagAlarmSupported
Indicates if enhanced diagnostics alarms / warnings implemented.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30
wwpLeosPortXcvrEnhDiagSoftTxDisableSupported
Indicates if enhanced diagnostics soft Tx disable control is implemented.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31
wwpLeosPortXcvrEnhDiagSoftTxFaultSupported
Indicates if enhanced diagnostics soft Tx fault monitoring is implemented.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32
wwpLeosPortXcvrEnhDiagRxLosSupported
Indicates if enhanced diagnostics Rx LOS monitoring is implemented.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33
wwpLeosPortXcvrHighTempAlarmThreshold
Indicates the higher threshold for temperature alarm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34
wwpLeosPortXcvrLowTempAlarmThreshold
Indicates the lower threshold for temperature alarm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35
wwpLeosPortXcvrHighVccAlarmThreshold
Indicates the higher threshold for voltage alarm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36
wwpLeosPortXcvrLowVccAlarmThreshold
Indicates the lower threshold for voltage alarm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37
wwpLeosPortXcvrHighBiasAlarmThreshold
Indicates the higher threshold for bias alarm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38
wwpLeosPortXcvrLowBiasAlarmThreshold
Indicates the lower threshold for bias alarm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39
wwpLeosPortXcvrHighTxPwAlarmThreshold
Indicates the higher threshold for Tx power alarm.
Units are micro watts
uWSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40
wwpLeosPortXcvrLowTxPwAlarmThreshold
Indicates the lower threshold for Tx power alarm.
Units are micro watts.
uWSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41
wwpLeosPortXcvrHighRxPwAlarmThreshold
Indicates the higher threshold for Rx power alarm.
Units are micro watts.
uWSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42
wwpLeosPortXcvrLowRxPwAlarmThreshold
Indicates the lower threshold for Rx power alarm.
Units are micro watts.
uWSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43
wwpLeosPortXcvrEnhDiagRateSelectSupported
Indicates if enhanced diagnostics soft rate select control is implemented.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44
wwpLeosPortXcvrAdminState
The admin state of the transceiver.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
3loopback
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.45
wwpLeosPortXcvrXfpMinBitRate
This represents the minimum bit rate.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.70
wwpLeosPortXcvrXfpMaxBitRate
This represents the maximum bit rate.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.71
wwpLeosPortXcvrXfpLinkLenSmf1km
This represents the length (SMF fiber) 1km.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.72
wwpLeosPortXcvrXfpLinkLenE50u2m
This represents the length (ext. BW MMF) 2m.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.73
wwpLeosPortXcvrXfpLinkLen50u1m
This represents the length (50um) 1m.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.74
wwpLeosPortXcvrXfpLinkLen62dot5u1m
This represents the length (62.5um) 1m.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.75
wwpLeosPortXcvrXfpLinkLenCopper1m
This represents the length (copper) 1m.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.76
wwpLeosPortXcvrXfpDevTech
This represents the device technology.
Enumeration
Enumerated Values:
1vcsel850nm
2vcsel1310nm
3vcsel1550nm
4fp1310nm
5dfb1310nm
6dfb1550nm
7eml1310nm
8eml1550nm
9copperOrOther
10tunable1550nm
11reserved
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.77
wwpLeosPortXcvrXfpTransmitterTech
This represents the device transmitter technology:
Bit 3: Wavelength Control (active/none)
Bit 2: Transmitter Cooling (cooled/uncooled)
Bit 1: Detector Type (apd/pin)
Bit 0: Transmitter Tuning (Tunable/non-Tunable)
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.78
wwpLeosPortXcvrXfpCdrSupport
This represents the CDR support:
Bit 7: 9.95 Gb/s (yes/no)
Bit 6: 10.3 Gb/s (yes/no)
Bit 5: 10.5 Gb/s (yes/no)
Bit 4: 10.7 Gb/s (yes/no)
Bit 3: 11.1 Gb/s (yes/no)
Bit 2: N/A
Bit 1: Lineside Loopback (yes/no)
…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.79
wwpLeosPortXcvrXfpWaveLengthTol
This represents the wavelength tolerance.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.80
wwpLeosPortXcvrXfpMaxCaseTemp
This represents the maximum case temperature.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.81
wwpLeosPortXcvrXfpMaxPower
This represents the maximum power dissipation.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.82
wwpLeosPortXcvrXfpMax5vCurrent
This represents the 5.0 Volt Max Current.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.83
wwpLeosPortXcvrXfpMax3p3vCurrent
This represents the 3.3 Volt Max Current.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.84
wwpLeosPortXcvrXfpMax1p8vCurrent
This represents the 1.8 Volt Max Current.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.85
wwpLeosPortXcvrXfpMaxNeg5p2vCurrent
This represents the -5.2 Volt Max Current.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.86
wwpLeosPortXcvrXfpDiagMonitorType
This represents the diag monitor type:
Bit 4 indicates BER support.
Bit 3 indidates the Rx Power Meas. type of Avg or OMA.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.87
wwpLeosPortXcvrXfpEnhancedOptions
This represents the enhanced options:
Bit 7: VPS Support (yes/no)
Bit 6: Soft TX_DISABLE (yes/no)
Bit 5: Soft P_down (yes/no)
Bit 4: VPS LV Regulator Mode (yes/no)
Bit 3: VPS bypassed Reg. Mode (yes/no)
Bit 2: Active FE…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.88
wwpLeosPortXcvrXfpAuxMonitoringInput1
This represents the Aux monitoring of A/D input 1.
Enumeration
Enumerated Values:
1none
2aPDBiasVoltage
3reserved
4tECCurrentMa
5laserTemp
6laserWavelength
7voltage5V
8voltage3p3V
9voltage1p8V
10voltageNeg5p2V
11voltage5VCurrent
12voltage3p3VCurrent
13voltage1p8VCurrent
14voltageNeg5p2VCurrent
15unknown
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.89
wwpLeosPortXcvrXfpAuxMonitoringInput2
This represents the Aux monitoring of A/D input 2.
Enumeration
Enumerated Values:
1none
2aPDBiasVoltage
3reserved
4tECCurrentMa
5laserTemp
6laserWavelength
7voltage5V
8voltage3p3V
9voltage1p8V
10voltageNeg5p2V
11voltage5VCurrent
12voltage3p3VCurrent
13voltage1p8VCurrent
14voltageNeg5p2VCurrent
15unknown
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.90
wwpLeosPortXcvrAdminFrequency
The admin frequency of the transceiver in GHz
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.91
wwpLeosPortXcvrXfpLaserFirstFrequency
This represents the first frequency in GHz
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.92
wwpLeosPortXcvrXfpLaserLastFrquency
This represents the last frequency in GHz
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.93
wwpLeosPortXcvrXfpMaxGridScacing
This represents the maximun support grid spacing in GHz
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.94
wwpLeosPortXcvrXfpChannelNum
This represents the channel number
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.95
wwpLeosPortXcvrXfpFrequencyError
This represents the frequency error
Integer32
Constraints:
range: -32768-32767
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.96
wwpLeosPortXcvrAdminWavelength
The admin wavelength of the transceiver in pico-meter
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.97
wwpLeosPortXcvrAdminChannel
The admin channel number of the transceiver
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.98
wwpLeosPortXcvrXfpLaserFirstWavelenth
This represents the first wavelength in pico meter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.99
wwpLeosPortXcvrXfpLaserLastWavelength
This represents the last wavelength in pico meter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.100
wwpLeosPortXcvrXfpLaserFirstChannel
This represents the first channel number
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.101
wwpLeosPortXcvrXfpLaserLastChannel
This represents the last channel number
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.102
wwpLeosPortXcvrOperFrequency
The operational frequency of the transceiver in GHz
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.103
wwpLeosPortXcvrOperWavelength
The operational wavelength of the transceiver in pico-meter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.104
wwpLeosPortXcvrRxDbmPower
Indicates the Rx power level in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,000.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105
wwpLeosPortXcvrTxDbmPower
Indicates the Tx power level in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,000.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106
wwpLeosPortXcvrHighTxDbmPwAlarmThreshold
Indicates the higher threshold for Tx power alarm in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,000.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.107
wwpLeosPortXcvrLowTxDbmPwAlarmThreshold
Indicates the lower threshold for Tx power alarm in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,000.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.108
wwpLeosPortXcvrHighRxDbmPwAlarmThreshold
Indicates the higher threshold for Rx power alarm in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,000.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.109
wwpLeosPortXcvrLowRxDbmPwAlarmThreshold
Indicates the lower threshold for Rx power alarm in dBm after scaling and conversion to an integer.
To convert back to dBm, convert this value to floating point and divide by 10,000.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.4.1.1.1.1.110