WWP-LEOS-CFM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
38
Rows
38
Columns
625

wwpLeosCfmGlobalFrameBudgetTable

table
.1.3.6.1.4.1.6141.2.60.35.1.1.24.2 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmGlobalFrameBudgetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmGlobalFrameBudgetTable' 
Global Frame Budget Table
wwpLeosCfmGlobalFrameBudgetEntry row .1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1
An entry (conceptual row) in the wwpLeosCfmServiceTable.
Not applicable to 6.x
Indexes
Column Syntax OID
wwpLeosCfmGlobalFrameBudgetSlotIndex
Slot Index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.1
wwpLeosCfmGlobalFrameBudgetValue
Frame budget value
frames/secSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.2

wwpLeosCfmServiceTable

table
.1.3.6.1.4.1.6141.2.60.35.1.2.1 · 1 row entry · 48 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmServiceTable' 
The (conceptual) table listing the configuration 
parameters for the CFM Service Table.          
To create an entry in this table the following criteria 
must be followed:                                  
wwpLeosCfmServiceType must be specified.
wwpLeosCfmServiceValue must be specified.
wwpLeosCfmServiceName must be specified.
wwpLeosCfmServiceStatus must be set to createAndGo.
wwpLeosCfmServiceEntry row .1.3.6.1.4.1.6141.2.60.35.1.2.1.1
An entry (conceptual row) in the wwpLeosCfmServiceTable.
Indexes
Column Syntax OID
wwpLeosCfmServiceIndex
A unique identifier for CFM service entry.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.1
wwpLeosCfmServiceType
This object is used to specify the service type.
Interpretation of wwpLeosCfmServiceValue depends on the value of this MIB object.
This MIB object along with wwpLeosCfmServiceValue must be unique for each entry in this …
Enumerationr/w
Enumerated Values:
1mplsVs
2ethVs
3vlan
4pbtTunnel
5vs
9other
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.2
wwpLeosCfmServiceValue
This object is used to specify the service value.
Interpretation of this object depends on the value of wwpLeosCfmServiceType.
This MIB object along with wwpLeosCfmServiceType must be unique for each entry in this table
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.3
wwpLeosCfmServiceAdminState
This object specifies the admin state of CFM for this service type.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.4
wwpLeosCfmServiceOperState
The operational state of CFM for this service type.
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.5
wwpLeosCfmServiceAlarmTime
This MIB object allows to set the time interval that a service fault detected
by wwpLeosCfmServiceType must be present prior to triggering a fault alarm.
Integer32r/w
Constraints:
range: 1-60000
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.6
wwpLeosCfmServiceCCMInterval
This MIB object allows to set the CCM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which CCMs are transmitted. The length of the interval increases …
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.7
wwpLeosCfmServiceName
This MIB object allows to set the CFM service name.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.9
wwpLeosCfmServiceMdLevel
This MIB object sets the CFM service level which associates it with a Maintenance Domain.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.10
wwpLeosCfmServiceResetTime
This MIB object set the time interval during which no service faults can be detected
before the service will reset a fault alarm.
Integer32r/w
Constraints:
range: 10-36000
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.11
wwpLeosCfmServiceLastFaultCCM
This MIB object shows last received CCM fault.
CfmDisplayString
Type Constraints:
range: 1..2
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.12
wwpLeosCfmServiceRMEPFailureFlag
This MIB object shows the RMEP failure flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.13
wwpLeosCfmServiceCCMErrorFlag
This MIB object shows the CCM Error flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.14
wwpLeosCfmServiceCrossConnectErrorFlag
This MIB object shows the cross-connect Error flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.15
wwpLeosCfmServiceNumMEP
This MIB object shows Number of MEPs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.16
wwpLeosCfmServiceNumRemoteMEP
This MIB object shows the Number of Remote MEPs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.17
wwpLeosCfmServiceNumActiveMEP
This MIB object shows the Number of active MEPs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.18
wwpLeosCfmServiceStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this obje…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.19
wwpLeosCfmServiceNextMepId
This mib object specifies the next MEP Id for given service.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.20
wwpLeosCfmServiceAlarmPriority
This mib object specifies the alarm priority for given service.
Unsigned32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.21
wwpLeosCfmServiceNumCCMForFault
The number of CCM frames that must go undelivered
for the service to be declared as operationally down.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.22
wwpLeosCfmServiceDMMInterval
This MIB object allows to set the DMM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which DMMs are transmitted. The length of the interval increases …
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.23
wwpLeosCfmServiceLMMInterval
This MIB object allows to set the LMM transmission interval index for the service specified by wwpLeosCfmServiceType.
This determines the frequency at which LMMs are transmitted. The length of the interval increases …
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.24
wwpLeosCfmServiceCCMLossStatsState
This object specifies the operational state of CCM loss accounting
for RMEPs learned by this service type.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.25
wwpLeosCfmServiceCCMLossBucketInterval
This object specifies the interval in minutes that each of the 96
CCM loss history buckets spans. The default is 15 minutes, which
means the default history covers 24 hours.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.26
wwpLeosCfmServiceRemoteMepDiscovery
This object specifies whether remote meps should be discovered automatically.
if this object is set to enable it will cause remote meps to be discovered
automatically and if set to disable will not discover rempote mep…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.27
wwpLeosCfmServiceY1731
Specifies if y1731 is enabled for the service.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.28
wwpLeosCfmServiceAccelerated
Specifies if the service is supported in hardware .
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.49
wwpLeosCfmServiceTlvSenderIdType
This mib object specifies the Sender Id Tlv Type.
Enumerationr/w
Enumerated Values:
1none
2chassis
3manage
4chassisManage
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.50
wwpLeosCfmServiceRMEPHoldTime
This mib object specifies the Remote MEP hold time in milliseconds.
Unsigned32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.51
wwpLeosCfmServiceCCMTxState
This mib object specifies the admin state of the CCM Tx.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.52
wwpLeosCfmServicePortStatusFlag
This mib object shows the Port Status defect flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.53
wwpLeosCfmServiceRDIFlag
This mib object shows the RDI defect flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.54
wwpLeosCfmServiceInstabilityFlag
This mib object shows the Instability defect flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.55
wwpLeosCfmServiceRMEPAging
Controls automatic Remote MEP aging for the service.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.56
wwpLeosCfmServiceDefaultMEPTypedeprecated
This object is used to specify the type of all MEP's created for
the service. Services of type PBT must specify a MEP type of 'down'.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.57
wwpLeosCfmServiceMAIDdeprecated
The MAID send by CCM's associated with the service.
CfmMAID
Type Constraints:
range: 1..48
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.58
wwpLeosCfmServiceMdIndexdeprecated
The unique index in the Maint Domain table.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.59
wwpLeosCfmServiceMaintAssocNameTypedeprecated
The type (and thereby format) of the Maintenance Association Name.
Dot1agCfmMaintAssocNameTyper/w
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
32iccBased
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.60
wwpLeosCfmServiceMaintAssocNamedeprecated
The Short Maintenance Association name. The type/format of
this object is determined by the value of the
dot1agCfmMaNetNameType object.
Dot1agCfmMaintAssocNamer/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.61
wwpLeosCfmServiceMulticastDa
Specifies if multicast DA mode is enabled for the service.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.65
wwpLeosCfmServiceChargedAgainstGlobalFrameBudget
This MIB object reflects if this service is charged against
the global frame budget.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.71
wwpLeosCfmServiceCfmDefaultMEPType
This object is used to specify the type of all MEP's created for
the service. Services of type PBT must specify a MEP type of 'down'.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.72
wwpLeosCfmServiceCfmMAID
The MAID send by CCM's associated with the service.
CfmMAID
Type Constraints:
range: 1..48
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.73
wwpLeosCfmServiceCfmMdIndex
The unique index in the Maint Domain table.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.74
wwpLeosCfmServiceCfmMaintAssocNameType
The type (and thereby format) of the Maintenance Association Name.
Dot1agCfmMaintAssocNameTyper/w
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
32iccBased
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.75
wwpLeosCfmServiceCfmMaintAssocName
The Short Maintenance Association name. The type/format of
this object is determined by the value of the
dot1agCfmMaNetNameType object.
Dot1agCfmMaintAssocNamer/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.76
wwpLeosCfmServiceCfmControlModuleFrameBudget
Cfm Frame budget for control module for the given service.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.2.1.1.77

wwpLeosCfmServiceFaultTable

table
.1.3.6.1.4.1.6141.2.60.35.1.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmServiceFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmServiceFaultTable' 
The (conceptual) table used for Fault Traps.
The last CFM error that occurred is reported.
wwpLeosCfmServiceFaultEntry row .1.3.6.1.4.1.6141.2.60.35.1.2.2.1
An entry (conceptual row) in the wwpLeosCfmServiceFaultTable.
Indexes
Column Syntax OID
wwpLeosCfmServiceFaultTime
This object is used to specify the Time at which the fault occurred.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.1
wwpLeosCfmServiceFaultType
This object is used to specify the type of fault.
Enumeration
Enumerated Values:
1none
2someRDIDefect
3someMACStatusDefect
4someRMEPCCMDefect
5errorCCMDefect
6xconCCMDefect
7instability
 .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.2
wwpLeosCfmServiceFaultDesc
This object is used to specify the description of the fault.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.3
wwpLeosCfmServiceFaultMep
This object is used to specify the Mepid of MEP reporting the fault.
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.4
wwpLeosCfmServiceVlan
This object is used to specify the service VLAN.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.5
wwpLeosCfmServiceVsPbtName
This object represents the virtual switch or Pbt tunnel assigned to the given service.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.2.2.1.50

wwpLeosCfmServiceStatisticsTable

table
.1.3.6.1.4.1.6141.2.60.35.1.2.3 · 1 row entry · 41 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmServiceStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmServiceStatisticsTable' 
The (conceptual) table listing the configuration 
parameters for the CFM Service Table.
          
To create an entry in this table, the following criteria must be met: 
                                 
wwpLeosCfmServiceType must be specified.
wwpLeosCfmServiceValue must be specified.
wwpLeosCfmServiceName must be specified.
wwpLeosCfmServiceStatus must be set to createAndGo.
wwpLeosCfmServiceStatisticsEntry row .1.3.6.1.4.1.6141.2.60.35.1.2.3.1
An entry (conceptual row) in the wwpLeosCfmServiceTable.
Indexes
Column Syntax OID
wwpLeosCfmServiceRxTotalValidFrames
The total valid Frames received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.1
wwpLeosCfmServiceRxTotalInvalidFrames
The total invalid Frames received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.2
wwpLeosCfmServiceInvalidMessageOverflow
The total invalid message overflow Frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.3
wwpLeosCfmServiceInvalidPortStatusTLV
The total invalid Port Status TLVs Frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.4
wwpLeosCfmServiceInvalidInterfaceStatusTLV
The invalid interface Status TLVs Frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.5
wwpLeosCfmServiceInvalidSenderIDTLV
The invalid SenderId TLV.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.6
wwpLeosCfmServiceTxTotalCCM
The total CCM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.7
wwpLeosCfmServiceTotalRxValidCCM
The total valid CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.8
wwpLeosCfmServiceTotalRxInSequenceCCM
The total CCM in sequence received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.9
wwpLeosCfmServiceTotalRxNotInSequenceCCM
The total CCM not in sequence received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.10
wwpLeosCfmServiceTotalRxMDLevelXconCCM
The total MD Level Xcon CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.11
wwpLeosCfmServiceTotalRxMAIDXconCCM
The total MAID Xcon CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.12
wwpLeosCfmServiceTotalRxMEPIDErrorCCM
The total MEPID Error CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.13
wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM
The total Interval Error CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.14
wwpLeosCfmServiceTotalRxInvalidCCM
The total Internal Error CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.15
wwpLeosCfmServiceTotalTxLTM
The total Internal Error CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.16
wwpLeosCfmServiceTotalTxLTR
The total Internal Error CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.17
wwpLeosCfmServiceTotalRxValidLTR
The valid LTR Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.18
wwpLeosCfmServiceTotalRxUnexpectedLTR
The unexpected LTR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.19
wwpLeosCfmServiceTotalRxInvalidLTR
This object specifies invalid LTR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.20
wwpLeosCfmServiceTotalRxInvalidRelayActionLTR
The total invalid relay action LTR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.21
wwpLeosCfmServiceTotalRxValidLTM
The valid LTM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.22
wwpLeosCfmServiceTotalTxInvalidLTM
The total invalid LTM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.23
wwpLeosCfmServiceTotalTxLBM
The total LBM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.24
wwpLeosCfmServiceTotalTxLBR
The total LBR sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.25
wwpLeosCfmServiceTotalRxInorderLBR
The total in order LBR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.26
wwpLeosCfmServiceTotalRxOutOfOrderLBR
The toal out of order LBR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.27
wwpLeosCfmServiceTotalRxContentMismatchLBR
The total content mismatch LBR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.28
wwpLeosCfmServiceTotalRxUnexpectedLBR
The total unexpected LBR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.29
wwpLeosCfmServiceTotalRxInvalidLBR
The invalid LBR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.30
wwpLeosCfmServiceTotalRxValidLBM
The valid LBM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.31
wwpLeosCfmServiceTotalRxInvalidLBM
The total invalid LBM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.32
wwpLeosCfmServiceTotalTxDMM
The total DMM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.33
wwpLeosCfmServiceTotalTxDMR
The total DMR sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.34
wwpLeosCfmServiceTotalRxDMM
The total DMM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.35
wwpLeosCfmServiceTotalRxDMR
The total DMR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.36
wwpLeosCfmServiceTotalTxLMM
The total LMM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.37
wwpLeosCfmServiceTotalTxLMR
The total LMR sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.38
wwpLeosCfmServiceTotalRxLMM
The total LMM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.39
wwpLeosCfmServiceTotalRxLMR
The total LMR received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.40
wwpLeosCfmServiceStatsClear
Setting this object to clear will clear statististics for the given service index.
This object can't be set to none
Enumerationr/w
Enumerated Values:
1clear
2none
 .1.3.6.1.4.1.6141.2.60.35.1.2.3.1.41

wwpLeosCfmMipTable

table
.1.3.6.1.4.1.6141.2.60.35.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmMipTable' 
The (conceptual) table listing the configuration 
parameters for the CFM MIP Table. 
This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel. 
Any Get/Set/Walk will return error.
wwpLeosCfmMipEntry row .1.3.6.1.4.1.6141.2.60.35.1.3.1.1
An entry (conceptual row) in the wwpLeosCfmMipTable.
Indexes
Column Syntax OID
wwpLeosCfmMipVid
This object is used as index in the table and is used to specify the
VLAN service type for which intermediate maintenance points can be created.
Integer32
Constraints:
range: 0-24576
 .1.3.6.1.4.1.6141.2.60.35.1.3.1.1.1
wwpLeosCfmMipPort
This object is used as index in the table and is used to specify the
port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.3.1.1.2
wwpLeosCfmMipLevel
This object is used to specify the level attribute.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.3.1.1.3
wwpLeosCfmMipStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'de…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.3.1.1.4

wwpLeosCfmLinkTraceMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.4.1 · 1 row entry · 12 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmLinkTraceMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmLinkTraceMsgTable' 
The (conceptual) table listing the configuration 
parameters for the LinkTraceMsg.
Not applicable to 6.x
wwpLeosCfmLinkTraceMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.4.1.1
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable.
Indexes
Column Syntax OID
wwpLeosCfmLinkTraceMsgPortId
This object is used to specify the port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.1
wwpLeosCfmLinkTraceMsgTargetMEPID
This object is used to specify the target MEPID.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else
error will be returned.
Integer32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.2
wwpLeosCfmLinkTraceMsgTargetMacAddr
This object is used to specify the target MacAddress to be used when sending link LinkMsg.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.3
wwpLeosCfmLinkTraceMsgTTL
This object is used to specify the TTL to be used when sending link LinkTraceMsg.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.4
wwpLeosCfmLinkTraceMsgSequenceNumber
This object is used to specify the sequence number in the linkTraceMsg.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.5
wwpLeosCfmLinkTraceMsgRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.6
wwpLeosCfmLinkTraceMsgPriority
This object is used to specify the priority to be used
when sending LinkTraceMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.7
wwpLeosCfmLinkTraceMsgServiceName
This object is used to specify the service to be used when
sending LinkTraceMsg.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.50
wwpLeosCfmLinkTraceMsgSubPortName
This object represents the sub-port name where the LinkTraceMsg
was sent.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.52
wwpLeosCfmLinkTraceMsgVsIndex
This object represents the virtual switch where the LinkTraceMsg was sent.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.53
wwpLeosCfmLinkTraceMsgTotalTxLtm
This object represents the total LinkTraceMsg were sent.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.54
wwpLeosCfmLinkTraceMsgTotalRxLtr
This object represents the total LinkTraceMsg were received
from the LinkTraceResponse.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.4.1.1.55

wwpLeosCfmLinkTraceMsgReplyTable

table
.1.3.6.1.4.1.6141.2.60.35.1.4.2 · 1 row entry · 15 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmLinkTraceMsgReplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmLinkTraceMsgReplyTable' 
The (conceptual) table listing the display 
parameters for the LinkTrace Msg Reply.
wwpLeosCfmLinkTraceMsgReplyEntry row .1.3.6.1.4.1.6141.2.60.35.1.4.2.1
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgReplyTable.
Indexes
Column Syntax OID
wwpLeosCfmLinkTraceMsgReplyTTL
This object is used to specify the ttl of the received LinkTrace msg reply.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.1
wwpLeosCfmLinkTraceMsgReplyTTLIndex
This object provides an additional index when multiple LinkTrace messages are received with the same TTL.
Unsigned32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.2
wwpLeosCfmLinkTraceMsgReplySequenceNumber
This object is used to specify the sequence number of the received LinkTrace msg reply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.3
wwpLeosCfmLinkTraceMsgReplyMPMacAddr
This object is used to specify the mac address of the MP of received LinkTrace msg reply.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.4
wwpLeosCfmLinkTraceMsgReplyMEPID
This object is used to specify the MEP ID of the received LinkTrace msg reply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.5
wwpLeosCfmLinkTraceMsgReplyTargetMacAddr
This object is used to specify the Target Mac address of the received LinkTrace msg reply.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.6
wwpLeosCfmLinkTraceMsgReplyRelayAction
This object is used to specify the message reply relay action.
Enumeration
Enumerated Values:
1invalid
2unknown
3fdb
4mpdb
5noLearn
6hit
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.7
wwpLeosCfmLinkTraceMsgReplyIngressPortobsolete
This object is used to specify the message reply ingress port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.8
wwpLeosCfmLinkTraceMsgReplyIngressAction
This object is used to specify the message reply ingress action.
Enumeration
Enumerated Values:
1ok
2blocked
3vid
4down
5none
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.9
wwpLeosCfmLinkTraceMsgReplyEgressPortobsolete
This object is used to specify the message reply egress port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.10
wwpLeosCfmLinkTraceMsgReplyEgressAction
This object is used to specify the message reply egress action.
Enumeration
Enumerated Values:
1none
2ttl
3down
4blocked
5vid
6ok
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.11
wwpLeosCfmLinkTraceMsgReplyIngressPortStr
This mib object is used to specify the message reply ingress port.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.12
wwpLeosCfmLinkTraceMsgReplyEgressPortStr
This mib object is used to specify the message reply egress port.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.13
wwpLeosCfmLinkTraceMsgReplyIngressMacAddr
This object is used to specify the message reply ingress mac address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.50
wwpLeosCfmLinkTraceMsgReplyEgressMacAddr
This object is used to specify the message reply egress mac address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.4.2.1.51

wwpLeosCfmLoopbackMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.5.1 · 1 row entry · 9 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmLoopbackMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmLoopbackMsgTable' 
The (conceptual) table listing the configuration 
parameters for the LoopbackMsg.
wwpLeosCfmLoopbackMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.5.1.1
An entry (conceptual row) in the wwpLeosCfmLoopbackMsgTable.
Indexes
Column Syntax OID
wwpLeosCfmLoopbackMsgPortId
This object is used to specify the port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.1
wwpLeosCfmLoopbackMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmLoopbackMsgTargetMacAddr is not specified else
error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.2
wwpLeosCfmLoopbackMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmLoopbackMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.3
wwpLeosCfmLoopbackMsgCount
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.4
wwpLeosCfmLoopbackMsgData
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
OctetStringr/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.5
wwpLeosCfmLoopbackMsgPriority
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.6
wwpLeosCfmLoopbackMsgRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.7
wwpLeosCfmLoopbackMsgDefaultInterval
The global default LoopbackMsg interval to be used when sending link LoopbackMsg
Integer32r/w
Constraints:
range: 10-60000
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.8
wwpLeosCfmLoopbackMsgDefaultTimeout
The global default LoopbackMsg timeout to be used when sending link LoopbackMsg
Integer32r/w
Constraints:
range: 2000-10000
 .1.3.6.1.4.1.6141.2.60.35.1.5.1.1.9

wwpLeosCfmMaintenanceDomainTable

table
.1.3.6.1.4.1.6141.2.60.35.1.6.1 · 1 row entry · 7 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmMaintenanceDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmMaintenanceDomainTable' 
The (conceptual) table listing the configuration 
parameters for the CFM Maintenance Domain Table.
wwpLeosCfmMaintenanceDomainEntry row .1.3.6.1.4.1.6141.2.60.35.1.6.1.1
An entry (conceptual row) in the wwpLeosCfmMaintenanceDomainTable.
Indexes
Column Syntax OID
wwpLeosCfmMaintenanceDomainIndex
This object specfies the unique index in the table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.1
wwpLeosCfmMaintenanceDomainLevel
This object specfies the domain level.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.2
wwpLeosCfmMaintenanceDomainName
The domain name which can be modified.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.3
wwpLeosCfmMaintenanceDomainServiceCount
This object specfies number of cfm services mapped to this domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.4
wwpLeosCfmMaintenanceDomainMdFormat
The type (and thereby format) of the Maintenance Domain Name.
Dot1agCfmMaintDomainNameTyper/w
Type Values:
1none
2dnsLikeName
3macAddressAndUint
4charString
 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.5
wwpLeosCfmMaintenanceDomainMdName
The Maintenance Domain name. The type/format of this object
is determined by the value of the wwpLeosCfmMaintenanceDomainMdFormat object.
Dot1agCfmMaintDomainNamer/w
Type Constraints:
range: 1..43
 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.6
wwpLeosCfmMaintenanceDomainStatus
Used to manage the creation and deletion of the conceptual rows in this table.

To create a row in this table, a manager must set this object to 'createAndGo'
and specify, at a minimum, the wwpLeosCfmMaint…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.6.1.1.7

wwpLeosCfmMEPTable

table
.1.3.6.1.4.1.6141.2.60.35.1.7.1 · 1 row entry · 48 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmMEPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmMEPTable' 
The (conceptual) table listing the configuration 
parameters for the CFM MEP table.
wwpLeosCfmMEPEntry row .1.3.6.1.4.1.6141.2.60.35.1.7.1.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Indexes
Column Syntax OID
wwpLeosCfmMEPPort
This object is used as index in the table and is used to specify the port id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.1
wwpLeosCfmMEPAdminState
This object is used to specify the admin state of CFM MEP.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.2
wwpLeosCfmMEPOperStateobsolete
This object is obsolete and should not be used.
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.3
wwpLeosCfmMEPDirection
This object is used to specify the MEP direction of the service.
This object can only be set if wwpLeosCfmServiceIndex is of type vlan.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.4
wwpLeosCfmMEPCCMState
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.5
wwpLeosCfmMEPCCMPriority
This object specified the priority of CCM messages transmitted.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.6
wwpLeosCfmMEPLTMPriorityobsolete
This object specifies the priority received on the given service and port.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.7
wwpLeosCfmMEPId
This object specifies the mep id for the given service and port.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.8
wwpLeosCfmMEPMacAddr
This object specifies the mac address received on the given service and port..
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.9
wwpLeosCfmMEPNextLbmSeqNumber
This object specifies the next lbm sequence number received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10
wwpLeosCfmMEPRxValidInOrderLoopbackReply
The total valid in order loopback replies received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11
wwpLeosCfmMEPRxValidOutOrderLoopbackReply
This object specifies the total valid out of order loopback replies received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12
wwpLeosCfmMEPNextLTMSeqNumber
This object specifies the next LTM serquence number received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13
wwpLeosCfmMEPNumLoopbackRepliesTxmt
This object specifies the flags total loopback replies transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14
wwpLeosCfmMEPNumLTMReceived
This object specifies the total LTM messages received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15
wwpLeosCfmMEPNumLTMTxmt
The total LTM transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16
wwpLeosCfmMEPNumCCMTxmt
This object specifies the total CCM messages transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17
wwpLeosCfmMEPRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.18
wwpLeosCfmMEPNumDMMSent
This object specifies the total delay measurement messages
transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19
wwpLeosCfmMEPDMMDelay
This object specifies the average delay in microseconds
measured during the last DMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20
wwpLeosCfmMEPDMMJitter
This object specifies the average jitter in microseconds
measured during the last DMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21
wwpLeosCfmMEPNumLMMSent
The total frame loss measurement messages transmitted
during the last test performed on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22
wwpLeosCfmMEPLMMFrameLossNear
This object specifies the number of lost frames on the near side
measured during the last LMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23
wwpLeosCfmMEPLMMFrameLossFar
This object specifies the number of lost frames on the far side
measured during the last LMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24
wwpLeosCfmMEPNumLMRReceived
This object specifies the total number of frame loss measurement
replies received during the last test performed on the given service
and port. If this count is zero, the near and far frame loss counts
are probably inv…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25
wwpLeosCfmMEPNumDMRReceived
This object specifies the total number of delay measurement
replies received during the last test performed on the given service
and port. If this count is not equal to the number of delay
measurement frames sent, the …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26
wwpLeosCfmMEPDMMMinDelay
The minimum delay in microseconds measured during
the last DMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27
wwpLeosCfmMEPDMMMaxDelay
The maximum delay in microseconds measured during
the last DMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28
wwpLeosCfmMEPDMMMinJitter
The minimum jitter in microseconds measured during
the last DMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29
wwpLeosCfmMEPDMMMaxJitter
The maximum jitter in microseconds measured during
the last DMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30
wwpLeosCfmMEPServiceName
This object is used to specify the service name assigned to this port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.50
wwpLeosCfmMEPSubPortName
This object represents the sub-port name assigned to the given service and port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51
wwpLeosCfmMEPVsPbtName
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.52
wwpLeosCfmMEPLogicalPortName
This object represents the logical port name assigned to the given service and port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.53
wwpLeosCfmMEPSubPortIndex
This object is used to specify the CFM sub-port index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.54
wwpLeosCfmMEPEncapsulation
This object is used to specify the encapsulation applied to the service and port.
Enumeration
Enumerated Values:
1ieee802dot1d
2pbtCfmEncap
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.55
wwpLeosCfmMEPLeadPortBayIndex
This object is used as to specify the agent bay that MEP is in.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.56
wwpLeosCfmMEPLeadPortShelfIndex
This object is used as to specify the agent shelf that MEP is in.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.57
wwpLeosCfmMEPLeadPortModuleIndex
This object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table.
Unsigned32
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.58
wwpLeosCfmMEPPBTBvid
This object specifies the BVID assigned to the given service and port.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.59
wwpLeosCfmMEPPBTEtype
This object specifies the E-type assigned to the given service and port.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.60
wwpLeosCfmMEPNumLbmTxmt
This object specifies the total loopback messages transmitted on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61
wwpLeosCfmMEPNumLbmReceived
This object specifies the total loopback messages received on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62
wwpLeosCfmMEPNumLoopbackRepliesReceived
This object specifies the total loopback replies received on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63
wwpLeosCfmMEPNumLTRepliesTxmt
This object specifies the total link trace replies transmitted on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64
wwpLeosCfmMEPNumLTRepliesReceived
This object specifies the total link trace replies received on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65
wwpLeosCfmMEPNumUnexpectedLTRepliesReceived
This object specifies the total unexpected link trace replies received on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66
wwpLeosCfmMEPNumCCMReceived
This object specifies the total CCM messages received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67

wwpLeosCfmRemoteMEPTable

table
.1.3.6.1.4.1.6141.2.60.35.1.8.1 · 1 row entry · 44 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmRemoteMEPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmRemoteMEPTable' 
The (conceptual) table listing the display 
parameters for the Remote MEP table.
wwpLeosCfmRemoteMEPEntry row .1.3.6.1.4.1.6141.2.60.35.1.8.1.1
An entry (conceptual row) in the wwpLeosCfmRemoteMEPTable.
Indexes
Column Syntax OID
wwpLeosCfmRemoteMEPID
This object is used as index in the table and is used to specify the MEPID.
Unsigned32
Constraints:
range: 1-100
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1
wwpLeosCfmRemoteMEPAdminState
The administrative state of the Remote MEP State Machine.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2
wwpLeosCfmRemoteMEPOperState
The operational state of the Remote MEP State Machine.
disabled represents that remote mep is admin disabled.
enabled represents that remote mep is operationally enabled
hold represents that remote mep is admin enabled …
Enumeration
Enumerated Values:
1disabled
2enabled
3hold
4holdLocked
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3
wwpLeosCfmRemoteMEPTime
This object is used to specify the time at which the Remote MEP State Machine last
entered RMEP_FAILED or RMEP_OK states.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4
wwpLeosCfmRemoteMEPMacAddr
This object is used to specify the MAC address of the remote MEP.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5
wwpLeosCfmRemoteMEPKLastMacStatus
This object is used to specify the last MAC status received.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6
wwpLeosCfmRemoteMEPFailureFlag
This object is used to specify the Remote MEP failure flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7
wwpLeosCfmRemoteMEPCCMErrorFlag
This object is used to specify the MEP CCM error flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8
wwpLeosCfmRemoteMEPRDIErrorFlag
This object is used to specify the MEP RDI error flag.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9
wwpLeosCfmRemoteMEPNumCCMRx
This object is used to show the number of MEP CCM frames received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10
wwpLeosCfmRemoteMEPNumDMMSent
The number of DMM frames sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11
wwpLeosCfmRemoteMEPDelay
This object is used to show the average Delay in microseconds
during the last Delay Measurement test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12
wwpLeosCfmRemoteMEPJitter
This object is used to show the average Jitter in microseconds
during the last Delay Measurement test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13
wwpLeosCfmRemoteMEPNumLMMSent
This object is used to show the number of LMM frames sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14
wwpLeosCfmRemoteMEPFrameLossNear
This object is used to show the near side Frame Loss
during the last Frame Loss Measurement test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15
wwpLeosCfmRemoteMEPFrameLossFar
This object is used to show the far side Frame Loss
during the last Frame Loss Measurement test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16
wwpLeosCfmRemoteMEPNumLMRReceived
This object is used to show the number of LMR frames received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17
wwpLeosCfmRemoteMEPNumCCMLost
This object is used to show the number of MEP CCM frames lost,
as calculated by watching for CCM sequence errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18
wwpLeosCfmRemoteMEPNumDMRReceived
This object is used to show the number of DMR frames received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19
wwpLeosCfmRemoteMEPHoldStatedeprecated
This object is used to set the remote MEP Hold State
Enumerationr/w
Enumerated Values:
1disabled
2enabled
3locked
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20
wwpLeosCfmRemoteMEPRowStatus
This object is used to create entries in remote mep table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21
wwpLeosCfmRemoteMEPCCMComment
This mib object contains the CCM Comment, if available,
that was sent by the remote Ciena device.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22
wwpLeosCfmRemoteMEPBadSequence
This mib object contains the number of LMR frames received
with bad sequence number, for a given service and remote mep.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23
wwpLeosCfmRemoteMEPMinDelay
The minimum Delay in microseconds
during the last Delay Measurement test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24
wwpLeosCfmRemoteMEPMaxDelay
The maximum Delay in microseconds
during the last Delay Measurement test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25
wwpLeosCfmRemoteMEPMinJitter
The minimum jitter in microseconds
during the last Delay Measurement test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26
wwpLeosCfmRemoteMEPMaxJitter
The maximum jitter in microseconds
during the last Delay Measurement test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27
wwpLeosCfmRemoteCfmMEPHoldState
Hold-state for the remote-mep entry.
Enumerationr/w
Enumerated Values:
1disable
2enable
3lock
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28
wwpLeosCfmRemoteMEPServiceClear
Setting this object to true causes the remote MEP for this service
to be re-initialized .
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29
wwpLeosCfmRemoteMEPServiceStatisticsClear
Setting this object to true resets the statistics for the remote MEP
for this service.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30
wwpLeosCfmRemoteMEPAccelerated
Specifies if the remote-mep is monitored in the hardware.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49
wwpLeosCfmRemoteMEPSubPortName
The object indicates the unique index for the module.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50
wwpLeosCfmRemoteMEPServiceName
This object is used to specify the Service name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51
wwpLeosCfmRemoteMEPBayIndex
This object is used as to specify the agent bay that MEP is in.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52
wwpLeosCfmRemoteMEPShelfIndex
This object is used as to specify the agent shelf that MEP is in.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53
wwpLeosCfmRemoteMEPModuleIndex
This object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table.
Unsigned32
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54
wwpLeosCfmRemoteMEPPreviousBayIndex
This object is used as to specify the agent bay that MEP was previously in.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55
wwpLeosCfmRemoteMEPPreviousShelfIndex
This object is used as to specify the agent shelf that MEP was previously in.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56
wwpLeosCfmRemoteMEPPreviousModuleIndex
This object is used as to specify the agent module that MEP was previously in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table.
Unsigned32
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57
wwpLeosCfmRemoteMEPLastPortStatus
This object is used as to specify the remote MEP last port status.
Enumeration
Enumerated Values:
1unknown
2none
3blocked
4up
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58
wwpLeosCfmRemoteMEPLastInterfaceStatus
This object is used as to specify the remote MEP interface status.
Enumeration
Enumerated Values:
1none
2up
3down
4testing
5dormant
6lowerLayerDown
7notPresent
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59
wwpLeosCfmRemoteMEPLastSeqNum
This object is used to show the tbd.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60
wwpLeosCfmRemoteMEPCCMSeqErrors
This object is used to show the number of MEP CCM frames sequence errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61
wwpLeosCfmRemoteMEPCCMLevel
This object is used as to specify the CCM level.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62

wwpLeosCfmPortStackTable

table deprecated
.1.3.6.1.4.1.6141.2.60.35.1.9.1 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmPortStackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmPortStackTable' 
The (conceptual) table listing the display 
parameters for the CFM port stack table.
wwpLeosCfmPortStackEntry row .1.3.6.1.4.1.6141.2.60.35.1.9.1.1
An entry (conceptual row) in the wwpLeosCfmPortStackTable.
Indexes
Column Syntax OID
wwpLeosCfmPortStackPortdeprecated
This object is used as index in the table and is used to specify the port id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.1
wwpLeosCfmPortStackViddeprecated
This object is used as index in the table and is used to show the VLAN.
Integer32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.2
wwpLeosCfmPortStackTypedeprecated
This object is used as index in the table and is used to show the type of Maintenance Point.
Enumeration
Enumerated Values:
1mepUp
2mepDown
3mip
 .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.3
wwpLeosCfmPortStackLeveldeprecated
This object is used as index in the table and is used to show the level of stack.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.4
wwpLeosCfmPortStackMEPIddeprecated
The MEP ID.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.6141.2.60.35.1.9.1.1.5

wwpLeosCfmMipCCMDbTable

table
.1.3.6.1.4.1.6141.2.60.35.1.10.1 · 1 row entry · 9 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmMipCCMDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmMipCCMDbTable' 
The (conceptual) table listing the display 
parameters for the MIP CCM Db table.
wwpLeosCfmMipCCMDbEntry row .1.3.6.1.4.1.6141.2.60.35.1.10.1.1
An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable.
Indexes
Column Syntax OID
wwpLeosCfmMipCCMDbIndex
This object shows the CCM DB vlan.
Unsigned32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.1
wwpLeosCfmMipCCMDbVid
This object shows the CCM DB vlan.
Unsigned32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.2
wwpLeosCfmMipCCMDbMacAddr
This object shows the mac address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.3
wwpLeosCfmMipCCMDbPort
This object shows the CCM DB port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.4
wwpLeosCfmMipCCMDbMEPID
This object shows the CCM DB MEP ID.
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.5
wwpLeosCfmMipCCMdbNumCCMRx
This object shows the number of CCM DB packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.6
wwpLeosCfmMipCCMDbTime
This object shows the CCM DB time.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.7
wwpLeosCfmMipCCMDbLastMacStatus
This object shows the CCM DB last mac status.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.8
wwpLeosCfmMipCCMDbRDIErrorFlag
This object shows the CCM DB RDI error flag status.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.10.1.1.9

wwpLeosCfmDelayMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.12.1 · 1 row entry · 12 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmDelayMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmDelayMsgTable' 
The (conceptual) table listing the configuration 
parameters for the DelayMeasurementMsg.
wwpLeosCfmDelayMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.12.1.1
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable.
Indexes
Column Syntax OID
wwpLeosCfmDelayMsgPortId
This object is used to specify the port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.1
wwpLeosCfmDelayMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmDelayMsgTargetMacAddr is not specified else
error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.2
wwpLeosCfmDelayMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmDelayMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.3
wwpLeosCfmDelayMsgCount
This object is used to specify the DelayMeasurementMsg count to be used
when sending link DelayMeasurementMsg.
Integer32r/w
Constraints:
range: 2-600
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.4
wwpLeosCfmDelayMsgPriority
This object is used to specify the DelayMeasurementMsg priority to be
used when sending link DelayMeasurementMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.5
wwpLeosCfmDelayMsgRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must set this object to
'createAndGo'. To delete a row in this table, set this to '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.6
wwpLeosCfmDelayMsgRepeat
Used to make the Delay Measurement test a repeating test.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.7
wwpLeosCfmDelayMsgRepeatCount
The repeat time in minutes for the Delay Measurement test.
If zero is specified, the test runs continuously.
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.8
wwpLeosCfmDelayMsgDelayThreshold
The fault threshold for the Delay Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the average delay result of the
test and a fault will be ge…
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.9
wwpLeosCfmDelayMsgJitterThreshold
The fault threshold for the Jitter Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the average jitter result of the
test and a fault will be …
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.10
wwpLeosCfmDelayMsgMaxDelayThreshold
The fault threshold for the Delay Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the maximum delay result of the
test and a fault will be ge…
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.11
wwpLeosCfmDelayMsgMaxJitterThreshold
The fault threshold for the Jitter Measurement test, specified
in microseconds. A value of -1 disables the generate of faults,
0 or greater will be compared to the maximum jitter result of the
test and a fault will be …
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.12.1.1.12

wwpLeosCfmFrameLossMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.13.1 · 1 row entry · 10 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmFrameLossMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmFrameLossMsgTable' 
The (conceptual) table listing the configuration 
parameters for the FrameLossMeasurementMsg.
wwpLeosCfmFrameLossMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.13.1.1
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable.
Indexes
Column Syntax OID
wwpLeosCfmFrameLossMsgPortId
This object is used to specify the port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.1
wwpLeosCfmFrameLossMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmFrameLossMsgTargetMacAddr is not specified else
error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.2
wwpLeosCfmFrameLossMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmFrameLossMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.3
wwpLeosCfmFrameLossMsgCount
This object is used to specify the FrameLossMeasurementMsg count to be used
when sending link FrameLossMeasurementMsg.
Integer32r/w
Constraints:
range: 2-600
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.4
wwpLeosCfmFrameLossMsgPriority
This object is used to specify the FrameLossMeasurementMsg priority to be
used when sending link FrameLossMeasurementMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.5
wwpLeosCfmFrameLossMsgRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must set this object to
'createAndGo'. To delete a row in this table, set this to '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.6
wwpLeosCfmFrameLossMsgRepeat
Used to make the Frame Loss Measurement test a repeating test.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.7
wwpLeosCfmFrameLossMsgRepeatCount
The repeat time in minutes for the Frame Loss Measurement test.
If zero is specified, the test runs continuously.
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.8
wwpLeosCfmFrameLossMsgFlnThreshold
The fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss near result of the
test and a fault will be generated if the thresh…
Integer32r/w
Constraints:
range: -1-600
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.9
wwpLeosCfmFrameLossMsgFlfThreshold
The fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss far result of the
test and a fault will be generated if the thresho…
Integer32r/w
Constraints:
range: -1-600
 .1.3.6.1.4.1.6141.2.60.35.1.13.1.1.10

wwpLeosCfmRemoteMEPCCMLossTable

table
.1.3.6.1.4.1.6141.2.60.35.1.14.1 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmRemoteMEPCCMLossTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmRemoteMEPCCMLossTable' 
The (conceptual) table listing the display 
parameters for the Remote MEP CCM Loss table.
wwpLeosCfmRemoteMEPCCMLossEntry row .1.3.6.1.4.1.6141.2.60.35.1.14.1.1
An entry (conceptual row) in the wwpLeosCfmRemoteMEPCCMLossTable.
Indexes
Column Syntax OID
wwpLeosCfmRemoteMEPCCMLossNum
This object is used as an index into the table and is used to specify
the CCM Loss bucket to be returned.
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.4.1.6141.2.60.35.1.14.1.1.1
wwpLeosCfmRemoteMEPCCMLossCount
Count of the number of CCM's lost during the
wwpLeosCfmServiceCCMLossBucketInterval sample period.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.14.1.1.2

wwpLeosCfmExtPortStackTable

table
.1.3.6.1.4.1.6141.2.60.35.1.15.1 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtPortStackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtPortStackTable' 
The (conceptual) table listing the display 
parameters for the CFM port stack table.
wwpLeosCfmExtPortStackEntry row .1.3.6.1.4.1.6141.2.60.35.1.15.1.1
An entry (conceptual row) in the wwpLeosCfmPortStackTable.
Indexes
Column Syntax OID
wwpLeosCfmExtPortStackVid
This object is used as index in the table and is used to show the VLAN.
Integer32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.1
wwpLeosCfmExtPortStackPort
This object is used as index in the table and is used to specify the port id.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.2
wwpLeosCfmExtPortStackType
This object is used as index in the table and is used to show the type of Maintenance Point.
Enumeration
Enumerated Values:
1mepUp
2mepDown
3mip
 .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.3
wwpLeosCfmExtPortStackLevel
This object is used as index in the table and is used to show the level of stack.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.4
wwpLeosCfmExtPortStackMEPId
The MEP ID.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.6141.2.60.35.1.15.1.1.5

wwpLeosCfmServiceFrameBudgetTable

table
.1.3.6.1.4.1.6141.2.60.35.1.16.1 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmServiceFrameBudgetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmServiceFrameBudgetTable' 
The (conceptual) table listing the config 
parameters for the CFM service frame budget table.
wwpLeosCfmServiceFrameBudgetEntry row .1.3.6.1.4.1.6141.2.60.35.1.16.1.1
An entry (conceptual row) in the wwpLeosCfmServiceFrameBudgetTable.
Indexes
Column Syntax OID
wwpLeosCfmSlotIndex
This object identifies the slot number.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.6141.2.60.35.1.16.1.1.1
wwpLeosCfmServiceFrameBudgetSlot
This object specifies the CFM frame budget for the slot for the given service.
frames/secSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.16.1.1.2

wwpLeosTceCfmMipTable

table
.1.3.6.1.4.1.6141.2.60.35.1.20.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTceCfmMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosTceCfmMipTable' 
The (conceptual) table listing the config 
parameters for the CFM MIP Table. This table is not applicable 
if wwpLeosTceCfmServiceType is set to pbtTunnel. 
Any Get/Set/Walk will return error.
Not applicable to 6.x
wwpLeosTceCfmMipEntry row .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1
An entry (conceptual row) in the wwpLeosTceCfmMipTable.
Indexes
Column Syntax OID
wwpLeosTceCfmMipLiType
This object specifies an unique index into the table.
Enumeration
Enumerated Values:
1subPort
2pbtService
3mplsStaticPeMeshVC
4mplsDynamicPeMeshVC
5mplsStaticPeSpokeVC
6mplsDynamicPeSpokeVC
7mplsStaticMtuSpokeVC
8mplsDynamicMtuSpokeVC
99none
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.1
wwpLeosTceCfmMipLiIndex
This object specifies an unique index into the table.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.2
wwpLeosTceCfmMipPgid
This object is used to specify the port group id.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.3
wwpLeosTceCfmMipBayIndex
This object is used to specify the chassis bay.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.4
wwpLeosTceCfmMipShelfIndex
This object is used to specify the chassis shelf.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.5
wwpLeosTceCfmMipModuleIndex
This object is used to specify the chassis module.
Unsigned32
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.6
wwpLeosTceCfmMipMacAddr
This object is used to specify the Mac Address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.7
wwpLeosTceCfmMipLevel
This object is used to specify the level attribute.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.8
wwpLeosTceCfmMipStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'de…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.9
wwpLeosTceCfmMipLiName
Logical interface name associated with the Mip.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.10

wwpLeosTceCfmLoopbackMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.20.3.1 · 1 row entry · 15 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTceCfmLoopbackMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosTceCfmLoopbackMsgTable' 
The (conceptual) table listing the config parameters for the LoopbackMsg.
The following attributes are required to create a LoopbackMsg:
-- wwpLeosCfmServiceIndex
-- wwpLeosTceCfmLoopbackMsgSubPortIndex
-- wwpLeosTceCfmLoopbackMsgTargetMEPID or
-- wwpLeosTceCfmLoopbackMsgTargetMacAddr
-- wwpLeosTceCfmLoopbackMsgCount
-- wwpLeosTceCfmLoopbackMsgData
-- wwpLeosTceCfmLoopbackMsgPriority
-- wwpLeosTceCfmLoopbackMsgRowStatus
Not applicable to 6.x
wwpLeosTceCfmLoopbackMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1
An entry (conceptual row) in the wwpLeosTceCfmLoopbackMsgTable.
Indexes
Column Syntax OID
wwpLeosTceCfmLoopbackMsgLocalMEPID
This object is used to specify the port.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.1
wwpLeosTceCfmLoopbackMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosTceCfmLoopbackMsgTargetMacAddr
is not specified else error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.2
wwpLeosTceCfmLoopbackMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending
link LoopbackMsg. This object should only be set if
wwpLeosTceCfmLoopbackMsgTargetMEPID is not specified else error will
be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.3
wwpLeosTceCfmLoopbackMsgCount
This object is used to specify the LoopbackMsg count to be used when
sending link LoopbackMsg.
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.4
wwpLeosTceCfmLoopbackMsgData
This object is used to specify the LoopbackMsg data to be used when
sending link LoopbackMsg.
OctetStringr/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.5
wwpLeosTceCfmLoopbackMsgPriority
This object is used to specify the LoopbackMsg priority to be used when
sending link LoopbackMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.6
wwpLeosTceCfmLoopbackMsgServiceName
This object is used to specify the Service used when
sending link LoopbackMsg.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.7
wwpLeosTceCfmLoopbackMsgSubPortName
This object is used to specify the sub-port used when
sending link LoopbackMsg.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.8
wwpLeosTceCfmLoopbackMsgNextLbmTransId
This object is used to specify next LoopbackMsg transaction id.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.9
wwpLeosTceCfmLoopbackMsgTotalTxLbm
This object is used to specify total LoopbackMsg sent.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.10
wwpLeosTceCfmLoopbackMsgTotalRxLbrIo
This object is used to specify total in-order LoopbackMsg received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.11
wwpLeosTceCfmLoopbackMsgTotalRxLbrOoo
This object is used to specify total out of order LoopbackMsg received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.12
wwpLeosTceCfmLoopbackMsgRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To send a LoopbackMsg, a manager must
set this object to 'createAndGo'. There is no concept of
delete a LoopbackMsg in this…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.13
wwpLeosTceCfmLoopbackMsgTotalRxLbrContentMismatch
This object is used to specify total content mismatch LoopbackMsg received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.14
wwpLeosTceCfmLoopbackMsgTotalRxLbrUnexpected
This object is used to specify total unexpected LoopbackMsg received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.15

wwpLeosTceCfmPortStackTable

table
.1.3.6.1.4.1.6141.2.60.35.1.20.5.1 · 1 row entry · 19 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTceCfmPortStackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosTceCfmPortStackTable' 
The (conceptual) table listing the display 
parameters for the CFM port stack table.
Not applicable to 6.x
wwpLeosTceCfmPortStackEntry row .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1
An entry (conceptual row) in the wwpLeosTceCfmPortStackTable.
Indexes
Column Syntax OID
wwpLeosTceCfmPortStackServiceType
This object is used to specify the CFM sub-port service type.
Enumeration
Enumerated Values:
1vs
2pbt
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.1
wwpLeosTceCfmPortStackServiceIndex
A unique identifier for CFM domain entry.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.2
wwpLeosTceCfmPortStackSubPortType
This object is used to specify the CFM sub-port type.
Enumeration
Enumerated Values:
1vs
2encapPbt
3decapPbt
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.3
wwpLeosTceCfmPortStackSubPortIndex
This object is used to specify the CFM sub-port index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.4
wwpLeosTceCfmPortStackSubPortName
This object is used to specify the CFM sub-port name.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.5
wwpLeosTceCfmPortStackOperState
This object is used to specify the CFM sub-port operational state.
Enumeration
Enumerated Values:
1unknown
2invalid
3enabled
4disabled
5notAuthenticated
6loopbackTx
7loopbackRx
8unequipped
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.6
wwpLeosTceCfmPortStackPgid
This object is used to specify the CFM sub-port group id.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.7
wwpLeosTceCfmPortStackBayIndex
This object is used to specify the CFM sub-port agent bay.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.8
wwpLeosTceCfmPortStackShelfIndex
This object is used to specify the CFM sub-port agent shelf.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.9
wwpLeosTceCfmPortStackModuleIndex
This object is used to specify the CFM sub-port agent slot.
Index value of 255 is reserved for Lag ports.
Unsigned32
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.10
wwpLeosTceCfmPortStackVsPbtName
This object is used to specify the CFM PBT name.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.11
wwpLeosTceCfmPortStackEgressXformTagValue1
This object is used to specify the egress tag value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.13
wwpLeosTceCfmPortStackEgressXformTagPriority1
This object is used to specify the egress tag priority.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.14
wwpLeosTceCfmPortStackEgressXformTagEtype1
This object is used to specify the egress tag etype.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.15
wwpLeosTceCfmPortStackEgressXformTagValue2
This object is used to specify the egress tag value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.16
wwpLeosTceCfmPortStackEgressXformTagPriority2
This object is used to specify the egress tag priority.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.17
wwpLeosTceCfmPortStackEgressXformTagEtype2
This object is used to specify the egress tag etype.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.18
wwpLeosTceCfmPortStackMepCount
This object is used to specify the MEP counts in both directions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.19
wwpLeosTceCfmPortStackMipLevel
This object is used to specify the port stack MIP level.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.20

wwpLeosTceCfmMEPTable

table
.1.3.6.1.4.1.6141.2.60.35.1.20.7.1 · 1 row entry · 45 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTceCfmMEPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosTceCfmMEPTable' 
The (conceptual) table listing the config 
parameters for the CFM MEP table.
Not applicable to 6.x
wwpLeosTceCfmMEPEntry row .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Indexes
Column Syntax OID
wwpLeosTceCfmMEPId
This is used as the index in the table.This object specifies the mep id for the given service.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.1
wwpLeosTceCfmMEPAdminState
This object is used to specify the admin state of CFM MEP.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.2
wwpLeosTceCfmMEPOperState
This object is used to specify the oper state of CFM MEP.
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.3
wwpLeosTceCfmMEPDirection
This object is used to specify the MEP direction of the service.
This object can only be set if wwpLeosCfmServiceIndex is of type vlan.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.4
wwpLeosTceCfmMEPCCMState
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.5
wwpLeosTceCfmMEPCCMPriority
This object specified the priority of CCM messages transmitted.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.6
wwpLeosTceCfmMEPLTMPriority
This object specifies the priority received on the given service and port.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.7
wwpLeosTceCfmMEPMacAddr
This object specifies the mac address received on the given service and port..
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.8
wwpLeosTceCfmMEPNextLbmSeqNumber
This object specifies the next lbm sequence number received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.9
wwpLeosTceCfmMEPRxValidInOrderLoopbackReply
This object specifies the total valid in order loopback replies received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.10
wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply
This object specifies the total valid out of order loopback replies received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.11
wwpLeosTceCfmMEPNextLTMSeqNumber
This object specifies the next LTM sequence number received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.12
wwpLeosTceCfmMEPNumLoopbackRepliesTxmt
This object specifies the flags total loopback replies transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.13
wwpLeosTceCfmMEPNumLTMRecevied
This object specifies the total LTM messages received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.14
wwpLeosTceCfmMEPNumLTMTxmt
This object specifies the total ltm transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.15
wwpLeosTceCfmMEPNumCCMTxmt
This object specifies the total CCM messages transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.16
wwpLeosTceCfmMEPRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.17
wwpLeosTceCfmMEPNumDMMSent
This object specifies the total delay measurement messages
transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.18
wwpLeosTceCfmMEPDMMDelay
This object specifies the average delay in microseconds
measured during the last DMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.19
wwpLeosTceCfmMEPDMMJitter
This object specifies the average jitter in microseconds
measured during the last DMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.20
wwpLeosTceCfmMEPNumLMMSent
This object specifies the total frame loss measurement messages
transmitted on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.21
wwpLeosTceCfmMEPLMMFrameLossNear
This object specifies the number of lost frames on the near side
measured during the last LMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.22
wwpLeosTceCfmMEPLMMFrameLossFar
This object specifies the number of lost frames on the far side
measured during the last LMM performance test on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.23
wwpLeosTceCfmMEPLiType
This object specifies Li Type on which the Mep is created.
Enumerationr/w
Enumerated Values:
1vs
2pbtService
3mplsStaticPeMeshVC
4mplsDynamicPeMeshVC
5mplsStaticPeSpokeVC
6mplsDynamicPeSpokeVC
7mplsStaticMtuSpokeVC
8mplsDynamicMtuSpokeVC
99none
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.24
wwpLeosTceCfmMEPLiIndex
This object specifies LiIndex for creating MEP
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.25
wwpLeosTceCfmMEPServiceName
This object is used to specify the service name assigned to this port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.50
wwpLeosTceCfmMEPSubPortName
This object represents the sub-port, PbtService or Mpls Vc name assigned to the given service and port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.51
wwpLeosTceCfmMEPVsPbtName
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.52
wwpLeosTceCfmMEPLogicalPortName
This object represents the logical port name assigned to the given service and port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.53
wwpLeosTceCfmMEPSubPortIndex
This object is used to specify the CFM sub-port index.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.54
wwpLeosTceCfmMEPEncapsulation
This object is used to specify the encapsulation applied to the service and port.
Enumeration
Enumerated Values:
1ieee802dot1d
2pbtCfmEncap
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.55
wwpLeosTceCfmMEPLeadPortBayIndex
This object is used as to specify the agent bay that MEP is in.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.56
wwpLeosTceCfmMEPLeadPortShelfIndex
This object is used as to specify the agent shelf that MEP is in.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.57
wwpLeosTceCfmMEPLeadPortModuleIndex
This object is used as to specify the agent module that MEP is in.
Index = 255 is reserved for Lag ports and this this object cannot be set to 255
in this table.
Unsigned32
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.58
wwpLeosTceCfmMEPPBTBvid
This object specifies the BVID assigned to the given service and port.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.59
wwpLeosTceCfmMEPPBTEtype
This object specifies the E-type assigned to the given service and port.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.60
wwpLeosTceCfmMEPNumLbmTxmt
This object specifies the total loopback messages transmitted on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.61
wwpLeosTceCfmMEPNumLbmReceived
This object specifies the total loopback messages received on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.62
wwpLeosTceCfmMEPNumLoopbackRepliesReceived
This object specifies the total loopback replies received on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.63
wwpLeosTceCfmMEPNumLTRepliesTxmt
This object specifies the total link trace replies transmitted on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.64
wwpLeosTceCfmMEPNumLTRepliesReceived
This object specifies the total link trace replies received on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.65
wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived
This object specifies the total unexpected link trace replies received on the
given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.66
wwpLeosTceCfmMEPNumCCMReceived
This object specifies the total CCM messages received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.67
wwpLeosTceCfmMEPRxContentMismatchLoopbackReply
This object specifies the total content mismatch loopback replies received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.68
wwpLeosTceCfmMEPRxUnexpectedLoopbackReply
This object specifies the total unexpected loopback replies received on the given service and port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.69

wwpLeosTceCfmDelayMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.20.12.1 · 1 row entry · 24 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTceCfmDelayMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosTceCfmDelayMsgTable' 
The (conceptual) table listing the config 
parameters for the DelayMeasurementMsg.
Not applicable to 6.x
wwpLeosTceCfmDelayMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable.
To send, clear or cancel the message, the corresponding MsgAction
needs to be specified. Individual objects in this table
cannot be set. …
Indexes
Column Syntax OID
wwpLeosTceCfmDelayMsgLocalMEPId
This object is used to specify the local MEPId.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.1
wwpLeosTceCfmDelayMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosTceCfmDelayMsgTargetMacAddr is not specified else
error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.2
wwpLeosTceCfmDelayMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosTceCfmDelayMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.3
wwpLeosTceCfmDelayMsgCount
This object is used to specify the DelayMeasurementMsg count to be used
when sending link DelayMeasurementMsg.
Integer32r/w
Constraints:
range: 2-9000
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.4
wwpLeosTceCfmDelayMsgPriority
This object is used to specify the DelayMeasurementMsg priority to be
used when sending link DelayMeasurementMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.5
wwpLeosTceCfmDelayMsgRowStatus
Is a display read-only field only. A row in this table
is created by the system when a service and mep is created
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.6
wwpLeosTceCfmDelayMsgRepeatInterval
Represents the Transmission Period for the Cfm Delay.
minutesUnsigned32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.40
wwpLeosTceCfmDelayMsgDelayThreshold
Represents the Threshold for the average delay
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.41
wwpLeosTceCfmDelayMsgJitterThreshold
Represents the threshold value for the Jitter
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.42
wwpLeosTceCfmDelayMsgServiceName
This object is used to specify the service to be used when
sending DelayMsg.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.43
wwpLeosTceCfmDelayMsgSubPortName
This object represents the sub-port name where the DelayMsg
was sent.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.44
wwpLeosTceCfmDelayMsgDelay
This object represents the Average Delay
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.50
wwpLeosTceCfmDelayMsgJitter
This object represents the average jitter
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.51
wwpLeosTceCfmDelayMsgTotalTxDmm
This object represents the total Delaymessages transmitted
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.52
wwpLeosTceCfmDelayMsgTotalRxDmm
This object represents the total Delaymessages received
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.53
wwpLeosTceCfmDelayMsgTotalTxDmr
This object represents the total DMRs transmitted
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.54
wwpLeosTceCfmDelayMsgTotalRxDmr
This object represents the total DMRs received
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.55
wwpLeosTceCfmDelayMsgAction
This object represents the action for the message (send, clear or cancel)
SendStater/w
Type Values:
1send
2clear
3cancel
99none
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.56
wwpLeosTceCfmDelayMsgMaxDelay
This object represents the Maximum Delay
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.57
wwpLeosTceCfmDelayMsgMaxJitter
This object represents the Maximum jitter
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.58
wwpLeosTceCfmDelayMsgMaxDelayThreshold
Represents the threshold for maximum delay
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.59
wwpLeosTceCfmDelayMsgMaxJitterThreshold
Represents the threshold value for maximum Jitter
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.60
wwpLeosTceCfmDelayMsgMinDelay
This object represents the Maximum Delay
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.61
wwpLeosTceCfmDelayMsgMinJitter
This object represents the Maximum jitter
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.62

wwpLeosTceCfmFrameLossMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.20.13.1 · 1 row entry · 18 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTceCfmFrameLossMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosTceCfmFrameLossMsgTable' 
The (conceptual) table listing the config 
parameters for the FrameLossMeasurementMsg.
Not applicable to 6.x
wwpLeosTceCfmFrameLossMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable.
To send, clear or cancel the message, the corresponding MsgAction
needs to be specified. Individual objects in this table
cannot be set. …
Indexes
Column Syntax OID
wwpLeosTceCfmFrameLossMsgLocalMEPId
This object is used to specify the Local MEPID at the source.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.1
wwpLeosTceCfmFrameLossMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMacAddr is not specified else
error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.2
wwpLeosTceCfmFrameLossMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.3
wwpLeosTceCfmFrameLossMsgCount
This object is used to specify the FrameLossMeasurementMsg count to be used
when sending link FrameLossMeasurementMsg.
Integer32r/w
Constraints:
range: 2-600
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.4
wwpLeosTceCfmFrameLossMsgPriority
This object is used to specify the FrameLossMeasurementMsg priority to be
used when sending link FrameLossMeasurementMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.5
wwpLeosTceCfmFrameLossMsgRowStatus
Is a read-only field. A row in this table is system-generated
on creation of cfm service and cfm mep objects
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.6
wwpLeosTceCfmFrameLossMsgRepeatInterval
Represents the Transmission Interval for the Frame loss messages
minutesUnsigned32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.50
wwpLeosTceCfmFrameLossMsgNearLossThreshold
Represents the threshold value for the near-end frame loss
Integer32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.51
wwpLeosTceCfmFrameLossMsgFarLossThreshold
Represents the threshold value for the far-end frame loss
Integer32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.52
wwpLeosTceCfmFrameLossMsgServiceName
This object is used to specify the service to be used when
sending FrameLossMsg (LMM).
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.53
wwpLeosTceCfmFrameLossMsgSubPortName
This object is used to specify the sub-port name to be used when
sending FrameLossMsg (LMM).
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.54
wwpLeosTceCfmFrameLossMsgFrameLossNear
This object represents the near-end Frame Loss. For a MEP,
near-end Frame loss refers to frame loss associated with the
ingress data frames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.55
wwpLeosTceCfmFrameLossMsgFrameLossFar
This object represents the far-end Frame Loss. For a MEP,
far-end Frame loss refers to frame loss associated with the
egress data frames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.56
wwpLeosTceCfmFrameLossMsgTotalTxLmm
This object represents the total LMMs transmitted
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.57
wwpLeosTceCfmFrameLossMsgTotalRxLmm
This object represents the total LMMs received
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.58
wwpLeosTceCfmFrameLossMsgTotalTxLmr
This object represents the total LMRs transmitted
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.59
wwpLeosTceCfmFrameLossMsgTotalRxLmr
This object represents the total LMRs received
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.60
wwpLeosTceCfmFrameLossMsgAction
This object represents the action for the message (send, clear or cancel).
SendStater/w
Type Values:
1send
2clear
3cancel
99none
 .1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.61

wwpLeosTceCfmMipCCMDbTable

table
.1.3.6.1.4.1.6141.2.60.35.1.20.14.1 · 1 row entry · 10 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosTceCfmMipCCMDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosTceCfmMipCCMDbTable' 
The (conceptual) table listing the display 
parameters for the MIP CCM Db table.
Not applicable to 6.x
wwpLeosTceCfmMipCCMDbEntry row .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1
An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable.
Indexes
Column Syntax OID
wwpLeosTceCfmMipCCMDbIndex
Mip CCM database index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.1
wwpLeosTceCfmMipCCMDbMacAddr
MAC Address
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.2
wwpLeosTceCfmMipCCMDbServiceName
Service Name
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.3
wwpLeosTceCfmMipCCMDbSubPortName
SubPort Name
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.4
wwpLeosTceCfmMipCCMdbNumCCMRx
Total Received CCMs
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.5
wwpLeosTceCfmMipCCMDbCCMRxTime
CCM Rx Time in ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.6
wwpLeosTceCfmMipCCMDbLevel
Level
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.7
wwpLeosTceCfmMipCCMDbMEPID
Mep Id
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.8
wwpLeosTceCfmMipRDI
RDI
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.9
wwpLeosTceCfmMipLastPortStatus
Last Port Status
Enumeration
Enumerated Values:
1blocked
2up
99none
 .1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.10

wwpLeosCfmExtLoopbackMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.3.1 · 1 row entry · 10 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtLoopbackMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtLoopbackMsgTable' 
The (conceptual) table listing the configuration parameters for the LoopbackMsg.
The following attributes are required to create a LoopbackMsg:
-- wwpLeosCfmServiceIndex
-- wwpLeosCfmExtLoopbackMsgTargetMEPID or
-- wwpLeosCfmExtLoopbackMsgTargetMacAddr
-- wwpLeosCfmExtLoopbackMsgCount
-- wwpLeosCfmExtLoopbackMsgData
-- wwpLeosCfmExtLoopbackMsgPriority
-- wwpLeosCfmExtLoopbackMsgAction
-- wwpLeosCfmExtLoopbackMsgInterval
-- wwpLeosCfmExtLoopbackMsgTimeout
-- wwpLeosCfmExtLoopbackMsgLoss
wwpLeosCfmExtLoopbackMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1
An entry (conceptual row) in the wwpLeosCfmExtLoopbackMsgTable.
Indexes
Column Syntax OID
wwpLeosCfmExtLoopbackMsgLocalMEPID
This object is used to specify the port.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.1
wwpLeosCfmExtLoopbackMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmExtLoopbackMsgTargetMacAddr
is not specified else error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.2
wwpLeosCfmExtLoopbackMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending
link LoopbackMsg. This object should only be set if
wwpLeosCfmExtLoopbackMsgTargetMEPID is not specified else error will
be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.3
wwpLeosCfmExtLoopbackMsgCount
This object is used to specify the LoopbackMsg count to be used when
sending link LoopbackMsg.
Integer32r/w
Constraints:
range: 1-3000
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.4
wwpLeosCfmExtLoopbackMsgData
This object is used to specify the LoopbackMsg data to be used when
sending link LoopbackMsg.
OctetStringr/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.5
wwpLeosCfmExtLoopbackMsgPriority
This object is used to specify the LoopbackMsg priority to be used when
sending link LoopbackMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.6
wwpLeosCfmExtLoopbackMsgAction
This object represents the action for the message (send, clear or cancel).
If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMacAddr is specified
then loopbackMsg is sent to remote Mac.
If set to send(1) and if ww…
SendStater/w
Type Values:
1send
2clear
3cancel
99none
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.7
wwpLeosCfmExtLoopbackMsgInterval
This object is used to specify the LoopbackMsg interval to be used when
sending link LoopbackMsg.
Integer32r/w
Constraints:
range: 10-60000
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.8
wwpLeosCfmExtLoopbackMsgTimeout
This object is used to specify the LoopbackMsg timeout to be used when
sending link LoopbackMsg.
Integer32r/w
Constraints:
range: 2000-10000
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.9
wwpLeosCfmExtLoopbackMsgLoss
This object is used to display the LoopbackMsg loss count.
Integer32
Constraints:
range: 1-3000
 .1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.10

wwpLeosCfmExtMEPTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.7.1 · 1 row entry · 35 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtMEPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtMEPTable' 
The (conceptual) table listing the configuration 
parameters for the CFM MEP table.
To create entry in this table use SNMP multiple set operation.
 - wwpLeosCfmExtPortId must be specified.
 - wwpLeosCfmExtVlanId must be specified.
 - wwpLeosCfmExtMEPRowStatus must be set to 'CreateAndGo'
wwpLeosCfmExtMEPEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Indexes
Column Syntax OID
wwpLeosCfmExtMEPId
This is used as the index in the table. This object specifies the MEP id for the given service.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.1
wwpLeosCfmExtPortId
 Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.2
wwpLeosCfmExtVlanId
 Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.3
wwpLeosCfmExtMEPAdminState
This object is used to specify the admin state of CFM MEP.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.4
wwpLeosCfmExtMEPOperState
This object is used to specify the oper state of CFM MEP.
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.5
wwpLeosCfmExtMEPDirection
This object is used to specify the MEP direction of the service.
This object can only be set if wwpLeosCfmServiceIndex is of type VLAN.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.6
wwpLeosCfmExtMEPCCMState
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.7
wwpLeosCfmExtMEPCCMPriority
This object specified the priority of CCM messages transmitted.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.8
wwpLeosCfmExtMEPLTMPriority
The priority received on the given service and MEP.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.9
wwpLeosCfmExtMEPMacAddr
The mac address received on the given service and MEP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.10
wwpLeosCfmExtMEPNextLbmSeqNumber
The next lbm sequence number received on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.11
wwpLeosCfmExtMEPNextLTMSeqNumber
The next LTM sequence number received on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.12
wwpLeosCfmExtMEPRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set this to '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.13
wwpLeosCfmExtMEPDMMDelay
The average delay in microseconds measured during
the last DMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.14
wwpLeosCfmExtMEPDMMJitter
The average jitter in microseconds measured during
the last DMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.15
wwpLeosCfmExtMEPLMMFrameLossNear
The number of lost frames on the near side measured during
the last LMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.16
wwpLeosCfmExtMEPLMMFrameLossFar
The number of lost frames on the far side measured during
the last LMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.17
wwpLeosCfmExtMEPServiceName
The service name assigned to this MEP.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.50
wwpLeosCfmExtMEPInterfaceName
The interface name associated with this MEP.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.51
wwpLeosCfmExtMEPServiceInstanceName
The service instance name associated
with this MEP.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.52
wwpLeosCfmExtMEPLogicalPortName
Logical port name associated with this MEP.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.53
wwpLeosCfmExtMEPTagMode
Tag-mode for the given mep and service. When on(1) the MEP originates all frames
with an additional inner-most tag. On a down MEP this is the CVLAN tag.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.54
wwpLeosCfmExtMEPTagVID
VLAN ID for the additional tag given mep and service.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.55
wwpLeosCfmExtMEPTagPriority
The priority encoded in the additional tag.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.56
wwpLeosCfmExtMEPLMMBadSequence
This object specifes the number of frames with bad sequence numbers
measured during the last LMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.57
wwpLeosCfmExtMEPCCMComment
This mib object allows to set the MEP CCM Comment.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.58
wwpLeosCfmExtMEPLMMMissingSequence
This object specifes the number of frames with missing sequence numbers
measured during the last LMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.59
wwpLeosCfmExtMEPBlockOppositeFaultCurrent
The number of frames seen in the current sample window.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.60
wwpLeosCfmExtMEPBlockOppositeFaultThreshold
The number of frames to block before generating a fault.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.61
wwpLeosCfmExtMEPBlockOppositeFaultTime
The frame sample window size in minutes.
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.62
wwpLeosCfmExtMEPDMMMinDelay
The minimum delay in microseconds measured during
the last DMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.63
wwpLeosCfmExtMEPDMMMaxDelay
The maximum delay in microseconds measured during
the last DMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.64
wwpLeosCfmExtMEPDMMMinJitter
The minimum jitter in microseconds measured during
the last DMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.65
wwpLeosCfmExtMEPDMMMaxJitter
The maximum jitter in microseconds measured during
the last DMM performance test on the given service and MEP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.66
wwpLeosCfmExtMEPAccelerated
Specifies if the mep is monitored in hardware.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.67

wwpLeosCfmExtMEPStatsTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.7.2 · 1 row entry · 48 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtMEPStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtMEPStatsTable' 
The (conceptual) table listing the configuration 
parameters for the CFM MEP table.
wwpLeosCfmExtMEPStatsEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Indexes
Column Syntax OID
wwpLeosCfmExtMEPStatsTotalValidFramesReceived
This object specifies total valid frames received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.1
wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived
This object specifies total invalid frames received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.2
wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived
This object specifies total invalid message overflow frames received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.3
wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived
This object specifies total invalid port status TLVs received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.4
wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived
This object specifies total invalid interface status TLVs received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.5
wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived
This object specifies total invalid senderID frames received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.6
wwpLeosCfmExtMEPStatsCCMTxmt
This object specifies total CCM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.7
wwpLeosCfmExtMEPStatsValidCCMReceived
This object specifies total valid CCMs received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.8
wwpLeosCfmExtMEPStatsCCMInSequenceReceived
This object specifies total CCM received in sequence.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.9
wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived
This object specifies total not in sequence received CCMs.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.10
wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived
This object specifies Xcon CCMs received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.11
wwpLeosCfmExtMEPStatsMAIDXconCCMReceived
This object specifies MAID Xcon CCMs.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.12
wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived
This object specifies Interval Error CCM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.13
wwpLeosCfmExtMEPStatsRxInvalidCCM
This object specified invalid CCMs received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.14
wwpLeosCfmExtMEPStatsLBMTxmt
This object specifies number of LBM sent
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.15
wwpLeosCfmExtMEPStatsLBRTxmt
This object specifies number of LBR sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.16
wwpLeosCfmExtMEPStatsInOrderLBRReceived
This object specifies number of in order LBR received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.17
wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived
This object specifies Out of order LBR received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.18
wwpLeosCfmExtMEPStatsContentMismatchLBRReceived
This object specifies number of content mismatch LBR received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.19
wwpLeosCfmExtMEPStatsUnexpectedLBRReceived
This object specifies unexpected LBR received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.20
wwpLeosCfmExtMEPStatsInvalidLBRReceived
This object specifies invalid LBR Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.21
wwpLeosCfmExtMEPStatsLTMTxmt
This object specifies number of LTM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.22
wwpLeosCfmExtMEPStatsValidLTMReceived
This object specifies total valid LTM received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.23
wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived
This object specifies total invalid LTM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.24
wwpLeosCfmExtMEPStatsInvalidLTRAction
This object specifies total invalid LTR action.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.25
wwpLeosCfmExtMEPStatsLTRTxmt
This object specifies total LTR sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.26
wwpLeosCfmExtMEPStatsLTRReceived
This object specifies unexpected LTR sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.27
wwpLeosCfmExtMEPStatsDMMTxmt
This object specifies total DMM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.28
wwpLeosCfmExtMEPStatsDMMReceived
This object specifies total DMM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.29
wwpLeosCfmExtMEPStatsDMRTxmt
This object specifies total DMR sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.30
wwpLeosCfmExtMEPStatsDMRReceived
This object specifies total DMR received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.31
wwpLeosCfmExtMEPStatsDMReplyTimeout
This object specifies DMR Timeout.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.32
wwpLeosCfmExtMEPStatsLMMTxmt
This object specifies total LMM Sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.33
wwpLeosCfmExtMEPStatsLMMReceived
This object specifies total LMM received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.34
wwpLeosCfmExtMEPStatsLMRTxmt
This object specifies total LMR sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.35
wwpLeosCfmExtMEPStatsLMRReceived
This object specifies total LMR Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.36
wwpLeosCfmExtMEPStatsLMRTimeout
This object specifies total LMR Timeout.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.37
wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived
This object specifies total MEPID Error CCM Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.38
wwpLeosCfmExtMEPStatsClear
Setting this object to clear will clear MEP stats for the given service and MepId.
This object can't be set to none
Enumerationr/w
Enumerated Values:
1clear
2none
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.40
wwpLeosCfmExtMEPStatsValidLBMReceived
This object specifies Valid LBM Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.41
wwpLeosCfmExtMEPStatsInvalidLBMReceived
This object specifies total invalid LBM Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.42
wwpLeosCfmExtMEPStatsUnexpectedLTRReceived
This object specifies total unexpected LTR Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.43
wwpLeosCfmExtMEPStatsInvalidDMMReceived
This object specifies total invalid DMM Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.44
wwpLeosCfmExtMEPStatsInvalidDMRReceived
This object specifies total invalid DMR Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.45
wwpLeosCfmExtMEPStatsUnexpectedDMRReceived
This object specifies total unexpected DMR Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.46
wwpLeosCfmExtMEPStatsInvalidLMMReceived
This object specifies total invalid LMM Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.47
wwpLeosCfmExtMEPStatsInvalidLMRReceived
This object specifies total invalid LMR Received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.48
wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep
This object specifies total invalid frames blocked by opposite MEP.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.49

wwpLeosCfmExtMEPLastStatsTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.7.3 · 1 row entry · 24 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtMEPLastStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtMEPLastStatsTable' 
The (conceptual) table listing the configuration 
parameters for the CFM MEP table.
wwpLeosCfmExtMEPLastStatsEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1
An entry (conceptual row) in the wwpLeosCfmMEPTable.
Indexes
Column Syntax OID
wwpLeosCfmExtMEPLastStatsPriority
This object specifies last LBM Priority
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.1
wwpLeosCfmExtMEPLastStatsLBMCount
This object specifies last LBM Count
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.2
wwpLeosCfmExtMEPLastStatsLBMSent
This object specifies last number LBM sent
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.3
wwpLeosCfmExtMEPLastStatsLBMToSend
This object specifies last LBM to send.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.4
wwpLeosCfmExtMEPLastStatsInOrderLBRReceived
This object specifies last In oder LBR received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.5
wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived
This object specifies last out of order LBR received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.6
wwpLeosCfmExtMEPLastStatsDMMPriority
This object specifies Last DMM Priority
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.7
wwpLeosCfmExtMEPLastStatsDMMTxmt
This object specifies number of last DMM sent
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.8
wwpLeosCfmExtMEPLastStatsDMMReceived
This object specifies last DMM Received
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.9
wwpLeosCfmExtMEPLastStatsDMMDelay
This object specifies Last DMM Delay.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.10
wwpLeosCfmExtMEPLastStatsDMMJitter
This object specifies last DMM Jitter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.11
wwpLeosCfmExtMEPLastStatsLMMPriority
This object specifies last LMM priority
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.12
wwpLeosCfmExtMEPLastStatsLMMTxtm
This object specifies last LMM sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.13
wwpLeosCfmExtMEPLastStatsLMMReceived
This object specifies number of last LMM received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.14
wwpLeosCfmExtMEPLastStatsFrameLossNear
This object specifies last near Frame Losses
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.15
wwpLeosCfmExtMEPLastStatsFrameLossFar
This object specifies last far Frames Loss
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.16
wwpLeosCfmExtMEPLastStatsLTMPriority
This object specifies last LTM Priority
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.17
wwpLeosCfmExtMEPLastStatsLTMSequenceNo
This object specifies last LTM Sequence number.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.18
wwpLeosCfmExtMEPLastStatsLTMInitialTTL
This object specifies last initial TTL LTM.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.19
wwpLeosCfmExtMEPLastStatsFrameLossBadSequence
This object specifes the number of frames with bad sequence numbers measured
during the last LMM performance test on the given service and Mep.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.20
wwpLeosCfmExtMEPLastStatsDMMMinDelay
This object specifies Last DMM Minimum Delay.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.21
wwpLeosCfmExtMEPLastStatsDMMMaxDelay
This object specifies Last DMM Maximum Delay.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.22
wwpLeosCfmExtMEPLastStatsDMMMinJitter
This object specifies last DMM Minimum Jitter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.23
wwpLeosCfmExtMEPLastStatsDMMMaxJitter
This object specifies last DMM Maximum Jitter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.24

wwpLeosCfmExtMEPDelayHistoryTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.7.5 · 1 row entry · 16 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtMEPDelayHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtMEPDelayHistoryTable' 
The (conceptual) table listing the Y.1731 Delay
History table for the CFM MEP.
wwpLeosCfmExtMEPDelayHistoryEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1
An entry (conceptual row) in the wwpLeosCfmMEPDelayHistoryTable.
Indexes
Column Syntax OID
wwpLeosCfmExtMEPDelayHistoryIndex
This is the history entry index into the table.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.1
wwpLeosCfmExtMEPDelayHistoryStatus
The status of the test sent on the given service and MEP.
Enumeration
Enumerated Values:
1running
2done
3canceled
4timeout
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.2
wwpLeosCfmExtMEPDelayHistoryInterval
The transmit rate of the Y.1731 DMM Frames sent on the given service and MEP.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.3
wwpLeosCfmExtMEPDelayHistoryPriority
The priority of the Y.1731 DMM Frames sent on the given service and MEP.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.4
wwpLeosCfmExtMEPDelayHistoryMEPId
The remote MEP id the test was ran against.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.5
wwpLeosCfmExtMEPDelayHistoryNumDMMSent
The number of DMM frames sent on the given service and MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.6
wwpLeosCfmExtMEPDelayHistoryNumDMRReceived
The number of DMR frames received on the given service and MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.7
wwpLeosCfmExtMEPDelayHistoryMinDelay
The minimum delay(us) seen on DMR frames received on the given service and MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.8
wwpLeosCfmExtMEPDelayHistoryAveDelay
The average delay(us) seen on DMR frames received on the given service and MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.9
wwpLeosCfmExtMEPDelayHistoryMaxDelay
The maximum delay(us) seen on DMR frames received on the given service and MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.10
wwpLeosCfmExtMEPDelayHistoryMinJitter
The minimum jitter(us) seen on DMR frames received on the given service and MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.11
wwpLeosCfmExtMEPDelayHistoryAveJitter
The average jitter(us) seen on DMR frames received on the given service and MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.12
wwpLeosCfmExtMEPDelayHistoryMaxJitter
The maximum jitter(us) seen on DMR frames received on the given service and MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.13
wwpLeosCfmExtMEPDelayHistoryStartTime
The time the test began on the given service and MEP.
The timestamp is the number of seconds since 12AM Jan 1st, 1970
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.14
wwpLeosCfmExtMEPDelayHistoryStopTime
The time the test terminated on the given service and MEP.
The timestamp is the number of seconds since 12AM Jan 1st, 1970
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.15
wwpLeosCfmExtMEPDelayHistoryClear
Setting this object to clear will clear MEP delay history for the
given service and MepId. This object can't be set to none
Enumerationr/w
Enumerated Values:
1clear
2none
 .1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.16

wwpLeosCfmExtLinkTraceMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.8.1 · 1 row entry · 7 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtLinkTraceMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtLinkTraceMsgTable' 
The (conceptual) table listing the configuration 
parameters for the LinkTraceMsg.
wwpLeosCfmExtLinkTraceMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable.
Indexes
Column Syntax OID
wwpLeosCfmExtLinkTraceMsgLocalMepID
This represent local mepid
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.1
wwpLeosCfmExtLinkTraceMsgTargetMEPID
This object is used to specify the target MEPID.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else
error will be returned.
Integer32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.2
wwpLeosCfmExtLinkTraceMsgTargetMacAddr
This object is used to specify the target MacAddress to be used when sending link LinkMsg.
This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.3
wwpLeosCfmExtLinkTraceMsgTTL
This object is used to specify the TTL to be used when sending link LinkTraceMsg.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.4
wwpLeosCfmExtLinkTraceMsgSequenceNumber
This object is used to specify the sequence number in the linkTraceMsg.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.5
wwpLeosCfmExtLinkTraceMsgPriority
This object is used to specify the priority to be used when sending LinkTraceMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.6
wwpLeosCfmExtLinkTraceMsgAction
This object represents the action for the message (send, clear or cancel)
If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMacAddr is specified
then LinkTraceMsg is sent to remote Mac.
If set to send(1) and if w…
SendStater/w
Type Values:
1send
2clear
3cancel
99none
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.7

wwpLeosCfmExtLinkTraceMsgReplyTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.8.2 · 1 row entry · 13 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtLinkTraceMsgReplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtLinkTraceMsgReplyTable' 
The (conceptual) table listing the display 
parameters for the LinkTrace Msg Reply.
wwpLeosCfmExtLinkTraceMsgReplyEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1
An entry (conceptual row) in the wwpLeosCfmExtLinkTraceMsgReplyTable.
Indexes
Column Syntax OID
wwpLeosCfmExtLinkTraceMsgReplyTTL
This object is used to specify the TTL of the received LinkTrace msg reply.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.1
wwpLeosCfmExtLinkTraceMsgReplyTTLIndex
This object provides an additional index when multiple LinkTrace messages are received with the same TTL.
Unsigned32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.2
wwpLeosCfmExtLinkTraceMsgReplySequenceNumber
This object is used to specify the sequence number of the received LinkTrace msg reply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.3
wwpLeosCfmExtLinkTraceMsgReplyMPMacAddr
This object is used to specify the mac address of the MP of received LinkTrace msg reply.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.4
wwpLeosCfmExtLinkTraceMsgReplyMEPID
This object is used to specify the MEP ID of the received LinkTrace msg reply.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.5
wwpLeosCfmExtLinkTraceMsgReplyTargetMacAddr
This object is used to specify the Target Mac address of the received LinkTrace msg reply.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.6
wwpLeosCfmExtLinkTraceMsgReplyRelayAction
This object is used to specify the message reply relay action.
Enumeration
Enumerated Values:
1invalid
2unknown
3fdb
4mpdb
5noLearn
6hit
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.7
wwpLeosCfmExtLinkTraceMsgReplyIngressPortobsolete
This object is used to specify the message reply ingress port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.8
wwpLeosCfmExtLinkTraceMsgReplyIngressAction
This object is used to specify the message reply ingress action.
Enumeration
Enumerated Values:
1ok
2blocked
3vid
4down
5none
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.9
wwpLeosCfmExtLinkTraceMsgReplyEgressPortobsolete
This object is used to specify the message reply egress port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.10
wwpLeosCfmExtLinkTraceMsgReplyEgressAction
This object is used to specify the message reply egress action.
Enumeration
Enumerated Values:
1none
2ttl
3down
4blocked
5vid
6ok
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.11
wwpLeosCfmExtLinkTraceMsgReplyIngressPortStr
This MIB object is used to specify the message reply ingress port.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.12
wwpLeosCfmExtLinkTraceMsgReplyEgressPortStr
This MIB object is used to specify the message reply egress port.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.13

wwpLeosCfmExtDelayMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.12.1 · 1 row entry · 12 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtDelayMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtDelayMsgTable' 
The (conceptual) table listing the configuration 
parameters for the DelayMeasurementMsg.
wwpLeosCfmExtDelayMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable.
To send, clear or cancel the message, the corresponding MsgAction
needs to be specified. Individual objects in this table
cannot be set. …
Indexes
Column Syntax OID
wwpLeosCfmExtDelayMsgLocalMEPId
This object is used to specify the local MEPId.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.1
wwpLeosCfmExtDelayMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmExtDelayMsgTargetMacAddr is not specified else
error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.2
wwpLeosCfmExtDelayMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmExtDelayMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.3
wwpLeosCfmExtDelayMsgCount
This object is used to specify the DelayMeasurementMsg count to be used
when sending link DelayMeasurementMsg. Counts between 2 and 600 are valid. The system
default count will be used if a value of 0 is entered.
Integer32r/w
Constraints:
range: 0-0
range: 2-600
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.4
wwpLeosCfmExtDelayMsgPriority
This object is used to specify the DelayMeasurementMsg priority to be
used when sending link DelayMeasurementMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.5
wwpLeosCfmExtDelayMsgRepeat
Used to make the Delay Measurement test a repeating test.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.8
wwpLeosCfmExtDelayMsgRepeatCount
The repeat time in minutes for the Delay Measurement test.
If zero is specified, the test runs continuously.
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.9
wwpLeosCfmExtDelayMsgDelayThreshold
Represents the fault Threshold for the average delay, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the average delay result of the
test and a fault will…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.41
wwpLeosCfmExtDelayMsgJitterThreshold
Represents the fault threshold value for the average Jitter, specified
in microseconds. A value of -1 disables the generation of faults,
0 or greater will be compared to the average jitter result of the
test and a faul…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.42
wwpLeosCfmExtDelayMsgAction
This object represents the action for the message (send, clear or cancel)
If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified
then loopbackMsg is sent to remote Mac.
If set to send(1) and if wwpLeo…
SendStater/w
Type Values:
1send
2clear
3cancel
99none
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.43
wwpLeosCfmExtDelayMsgMaxDelayThreshold
Represents the Threshold for the maximum Delay, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the maximum delay result of the
test and a fault will be ge…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.44
wwpLeosCfmExtDelayMsgMaxJitterThreshold
Represents the threshold value for the maximum Jitter, specified
in microseconds. A value of -1 disables the generatation of faults,
0 or greater will be compared to the maximum jitter result of the
test and a fault wi…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.45

wwpLeosCfmExtFrameLossMsgTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.13.1 · 1 row entry · 11 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtFrameLossMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtFrameLossMsgTable' 
The (conceptual) table listing the configuration 
parameters for the FrameLossMeasurementMsg.
wwpLeosCfmExtFrameLossMsgEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable.
To send, clear or cancel the message, the corresponding MsgAction
needs to be specified. Individual objects in this table
cannot be set. …
Indexes
Column Syntax OID
wwpLeosCfmExtFrameLossMsgLocalMEPId
This object is used to specify the Local MEPID at teh source.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.1
wwpLeosCfmExtFrameLossMsgTargetMEPID
This object is used to specify the MEPID.
This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMacAddr is not specified else
error will be returned.
Unsigned32r/w
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.2
wwpLeosCfmExtFrameLossMsgTargetMacAddr
This object is used to specify the MacAddress to be used when sending link LoopbackMsg.
This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMEPID is not specified else
error will be returned.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.3
wwpLeosCfmExtFrameLossMsgCount
This object is used to specify the FrameLossMeasurementMsg count to be used
when sending link FrameLossMeasurementMsg.
Integer32r/w
Constraints:
range: 2-600
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.4
wwpLeosCfmExtFrameLossMsgPriority
This object is used to specify the FrameLossMeasurementMsg priority to be
used when sending link FrameLossMeasurementMsg.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.5
wwpLeosCfmExtFrameLossMsgRepeat
Used to make the Frame Loss Measurement test a repeating test.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.8
wwpLeosCfmExtFrameLossMsgRepeatCount
The repeat time in minutes for the Frame Loss Measurement test.
If zero is specified, the test runs continuously.
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.9
wwpLeosCfmExtFrameLossMsgFlnThreshold
The fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss near result of the
test and a fault will be generated if the thresh…
Integer32r/w
Constraints:
range: -1-600
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.10
wwpLeosCfmExtFrameLossMsgFlfThreshold
The fault threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss far result of the
test and a fault will be generated if the thresho…
Integer32r/w
Constraints:
range: -1-600
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.11
wwpLeosCfmExtFrameLossMsgAction
This object represents the action for the message (send, clear or cancel)
This object represents the action for the message (send, clear or cancel)
If set to send(1) and if wwpLeosCfmExtFrameLossMacAddr is specified
th…
SendStater/w
Type Values:
1send
2clear
3cancel
99none
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.12
wwpLeosCfmExtFrameLossMsgSeqThreshold
The sequence threshold for the Frame Loss Measurement test.
A value of -1 disables the generate of faults, 0 or greater
will be compared to the frame loss far result of the
test and a fault will be generated if the thre…
Integer32r/w
Constraints:
range: -1-600
 .1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.13

wwpLeosCfmExtInterfaceStackTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.14.1 · 1 row entry · 14 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtInterfaceStackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtInterfaceStackTable' 
The (conceptual) table listing the display 
parameters for the CFM port stack table.
wwpLeosCfmExtInterfaceStackEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1
An entry (conceptual row) in the wwpLeosTceCfmPortStackTable.
Indexes
Column Syntax OID
wwpLeosCfmExtInterfaceStackServiceInstanceType
This object is used to specify the CFM port service type.
Enumeration
Enumerated Values:
1ethVs
2vlan
3pbtTunnel
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.1
wwpLeosCfmExtInterfaceStackServiceInstanceIndex
A unique identifier for CFM domain entry.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.2
wwpLeosCfmExtInterfaceStackInterfaceType
This object is used to specify the CFM interface type.
Enumeration
Enumerated Values:
1logicalPort
2pbtEncap
3pbtDecap
99none
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.3
wwpLeosCfmExtInterfaceStackInterfaceIndex
This object is used to specify the CFM sub port index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.4
wwpLeosCfmExtInterfaceStackLevel
This object is used to specify the CFM interface level.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.5
wwpLeosCfmExtInterfaceStackStackType
This object is used to specify the CFM interface type.
Enumeration
Enumerated Values:
1mepUp
2mepDown
3mipUp
4mipDown
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.6
wwpLeosCfmExtInterfaceStackInterfaceName
This object is used to specify the CFM interface name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.7
wwpLeosCfmExtInterfaceStackServiceInstanceName
This object is used to specify the CFM interface name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.8
wwpLeosCfmExtInterfaceStackPortName
This object is used to specify the CFM interface port name.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.9
wwpLeosCfmExtInterfaceStackOperState
This object is used to specify the CFM interface oper state.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.10
wwpLeosCfmExtInterfaceStackVid
This object is used to specify the CFM interface vid.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.11
wwpLeosCfmExtInterfaceStackPgid
This object is used to specify the CFM interface pgid.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.12
wwpLeosCfmExtInterfaceStackMEPId
This object is used to specify the CFM interface mepid.
Integer32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.13
wwpLeosCfmExtInterfaceStackMacAddress
This object is used to specify the CFM interface macaddress.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.14

wwpLeosCfmExtMipTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.15.1 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtMipTable' 
The (conceptual) table listing the configuration 
parameters for the CFM Ext MIP Table. 
This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel. 
Any Get/Set/Walk will return error.
wwpLeosCfmExtMipEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1
An entry (conceptual row) in the wwpLeosCfmExtMipTable.
Indexes
Column Syntax OID
wwpLeosCfmExtMipVid
This object is used as index in the table and is used to specify the
VLAN service type for which intermediate maintenance points can be created.
Integer32
Constraints:
range: 0-24576
 .1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.1
wwpLeosCfmExtMipPort
This object is used as index in the table and is used to specify the
port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.2
wwpLeosCfmExtMipLevel
The level attribute.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.3
wwpLeosCfmExtMipStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'de…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.4

wwpLeosCfmExtInterfaceMipTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.16.1 · 1 row entry · 7 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtInterfaceMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtInterfaceMipTable' 
The (conceptual) table listing the configuration 
parameters for the CFM Ext MIP SI Table.
wwpLeosCfmExtInterfaceMipEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1
An entry (conceptual row) in the wwpLeosCfmExtInterfaceMipTable.
Indexes
Column Syntax OID
wwpLeosCfmExtInterfaceMipServiceInstanceType
This object is used to specify the service instance type.
Interpretation of wwpLeosCfmExtInterfaceMipServiceInstanceIndex depends on the value of this MIB object.
Enumeration
Enumerated Values:
1ethVs
2vlan
3pbtTunnel
 .1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.1
wwpLeosCfmExtInterfaceMipServiceInstanceIndex
This object is used to specify the service instance index.
Interpretation of this object depends on the value of wwpLeosCfmExtInterfaceMipServiceInstanceType.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.2
wwpLeosCfmExtInterfaceMipInterfaceType
This object is used to specify the CFM interface type.
Enumeration
Enumerated Values:
0none
1portVlan
2pbtEncap
3pbtDecap
 .1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.3
wwpLeosCfmExtInterfaceMipInterfaceIndex
This object is used to specify an interface index.
When the value of object wwpLeosCfmExtInterfaceMipInterfaceType
is portVlan this obect refers to a port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.4
wwpLeosCfmExtInterfaceMipInterfaceSubIndex
This object is used to specify a sub interface index.
When the value of object wwpLeosCfmExtInterfaceMipInterfaceType
is portVlan this obect refers to a vlan.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.5
wwpLeosCfmExtInterfaceMipLevel
The level attribute.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.6
wwpLeosCfmExtInterfaceMipStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, set it to 'de…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.7

wwpLeosCfmExtOamPortTable

table
.1.3.6.1.4.1.6141.2.60.35.1.21.17.1 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosCfmExtOamPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-CFM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-CFM-MIB::wwpLeosCfmExtOamPortTable' 
The (conceptual) table listing  if a port is OAM capable.
wwpLeosCfmExtOamPortEntry row .1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1
An entry (conceptual row) in the wwpLeosCfmExtOamPortTable.
Indexes
Column Syntax OID
wwpLeosCfmExtOamPortIndex
Specifies the port index.
Integer32
Constraints:
range: 1-3072
 .1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.1
wwpLeosCfmExtOamPortSupported
Specifies if the port is OAM capable.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.2