WWP-LEOS-BROADCAST-CONTAINMENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
10
.1.3.6.1.4.1.6141.2.60.8.1.4 · 1 row entry · 7 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosBroadcastContainmentFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-BROADCAST-CONTAINMENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-BROADCAST-CONTAINMENT-MIB::wwpLeosBroadcastContainmentFilterTable'
Table of broadcast containment configuration.
wwpLeosBroadcastContainmentFilterEntry row .1.3.6.1.4.1.6141.2.60.8.1.4.1
Broadcast containment entry in the Broadcast Containment Table.
Column Syntax OID
Unique index into the table.
Integer32
Constraints:
range: 1-4095
.1.3.6.1.4.1.6141.2.60.8.1.4.1.1
Specifies the name of the filter. If wwpLeosBroadcastContainmentFilterName is not set during
filter creation then filter will be created with no name.
Filter name can be set later by setting this object.
OctetStringr/w
Constraints:
range: 1-15
.1.3.6.1.4.1.6141.2.60.8.1.4.1.2
The maximum number of broadcast packets which can be
received by this device. Setting this object to 0 will make the
broadcast pkt limit as unlimited.
Integer32r/w
Constraints:
range: 0-104856000
.1.3.6.1.4.1.6141.2.60.8.1.4.1.3
This object if True, specifies that packets were dropped for the
given filter since it was last read. If this object reads false
then no packet was dropped since it was last read.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6141.2.60.8.1.4.1.4
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete the
entry set this to destroy. To update this entry
this object may not be set.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.8.1.4.1.5
The maximum number of broadcast packets which can be
received by this device.
Integer32r/w
Constraints:
range: 0-10000000
.1.3.6.1.4.1.6141.2.60.8.1.4.1.6
The classifier type for the filter. The value of this object could be
any of the below or addition of any of the below:

ClassifierType_Unknown(0)
ClassifierType_Broadcast(1)
ClassifierType_Unknow…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.8.1.4.1.7
.1.3.6.1.4.1.6141.2.60.8.1.5 · 1 row entry · 3 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosBroadcastContainmentFilterMemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-BROADCAST-CONTAINMENT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-BROADCAST-CONTAINMENT-MIB::wwpLeosBroadcastContainmentFilterMemTable'
Table of broadcast containment membership.
wwpLeosBroadcastContainmentFilterMemEntry row .1.3.6.1.4.1.6141.2.60.8.1.5.1
Broadcast containment entry in the Broadcast Containment Table.
Column Syntax OID
Unique index into the table. Depending on the capability of device
set this index to valid VLAN id or 0 for all vlans.
Integer32
Constraints:
range: 0-4095
.1.3.6.1.4.1.6141.2.60.8.1.5.1.1
Unique index into the table. Depending on the capability of device
set this index to valid port id or 0 for all ports.
Integer32
Constraints:
range: 0-4095
.1.3.6.1.4.1.6141.2.60.8.1.5.1.2
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete the
entry set this to destroy. To update this entry
this object may not be set.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.8.1.5.1.3