WWP-L2-CF-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
17

wwpL2CFTunnelTable

table
.1.3.6.1.4.1.6141.2.53.1.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpL2CFTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-L2-CF-TUNNEL-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-L2-CF-TUNNEL-MIB::wwpL2CFTunnelTable' 
VLAN table
wwpL2CFTunnelEntry row .1.3.6.1.4.1.6141.2.53.1.1.1.1
table of vlans
Indexes
Column Syntax OID
wwpL2CFTunnelVlanId
802.1Q VLAN ID (1-4094)
VlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6141.2.53.1.1.1.1.1
wwpL2CFTunnelOperStatus
The current operational state of tunnel.
Enumeration
Enumerated Values:
0operActive
1operVlanNotExist
2operInvalidVlanPortTag
3operInvalidVlanNumPorts
4operInvalidCfg
5operDisabled
 .1.3.6.1.4.1.6141.2.53.1.1.1.1.2
wwpL2CFTunnelAdminStatus
The administratively desired status of Layer 2 control frame handling.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.6141.2.53.1.1.1.1.3
wwpL2CFTunnelPriority
The 802.1p packet priority to be assigned to packets associated
with this port that do not have an 802.1Q VLAN header.
Enumerationr/w
Enumerated Values:
0p0
1p1
2p2
3p3
4p4
5p5
6p6
7p7
 .1.3.6.1.4.1.6141.2.53.1.1.1.1.4
wwpL2CFTunnelRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.
The default state for wwpL2CFTunnelAdmin…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.53.1.1.1.1.5

wwpL2CFTProtocolTable

table
.1.3.6.1.4.1.6141.2.53.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpL2CFTProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-L2-CF-TUNNEL-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-L2-CF-TUNNEL-MIB::wwpL2CFTProtocolTable' 
The (conceptual) table listing the l2 control frame 
protocol status tunnels.
wwpL2CFTProtocolEntry row .1.3.6.1.4.1.6141.2.53.1.1.2.1
The layer 2 control frame protocol tunnel
entry.
Indexes
Column Syntax OID
wwpL2CFTVlanId
802.1Q VLAN ID (1-4094)
VlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6141.2.53.1.1.2.1.1
wwpL2CFTProtocolNum
This object represent the list of protocols the device
can support.
Enumeration
Enumerated Values:
1l28021x
2bridge-grp-addr
3cdp
4dtp
5gvrp
6lacp
7marker-protocol
8oam
9pagp
10pvst
11stp-uplink-fast
12udld
13vlanbridge
14vtp
15lldp
 .1.3.6.1.4.1.6141.2.53.1.1.2.1.2
wwpL2CFTDispositionType
Setting this object to 'discard' will cause wwpL2CFTProtocolNum
frames arriving at the specified port to be discarded.
NOTE: Setting this to 'peer' will cause the wwpL2CFTProtocolNum frame
to be processed in the same …
Enumerationr/w
Enumerated Values:
0discard
1peer
2tunnel
 .1.3.6.1.4.1.6141.2.53.1.1.2.1.3

wwpL2CFTStatsTable

table
.1.3.6.1.4.1.6141.2.53.1.1.3 · 1 row entry · 9 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpL2CFTStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-L2-CF-TUNNEL-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-L2-CF-TUNNEL-MIB::wwpL2CFTStatsTable' 
A table that contains the frame counters for Layer 2 control frame
handling.
wwpL2CFTStatsEntry row .1.3.6.1.4.1.6141.2.53.1.1.3.1
A list of Link Aggregation Control Protocol statistics
for each port on this device.
Indexes
Column Syntax OID
wwpL2CFTStatsVlanId
802.1Q VLAN ID (1-4094)
VlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.1
wwpL2CFTStatsProtocolNum
This object represent the list of protocols the device
can support.
Enumeration
Enumerated Values:
1l28021x
2bridge-grp-addr
3cdp
4dtp
5gvrp
6lacp
7marker-protocol
8oam
9pagp
10pvst
11stp-uplink-fast
12udld
13vlanbridge
14vtp
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.2
wwpL2CFTStatsPacketsRx
The number of number of pkts ingressed matching protocol.
This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.3
wwpL2CFTStatsTunneledFrames
The number of number of pts that made tunneled.
This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.4
wwpL2CFTStatsDecodedFrames
The number of came in tunneled, then restored.
This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.5
wwpL2CFTStatsDecodedFailed
The number of failed to untunnel.
This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.6
wwpL2CFTStatsPeeredFrames
The number of number of peered packets.
This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.7
wwpL2CFTStatsDiscardFrames
The number of number of discarded packets.
This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.8
wwpL2CFTStatsTunFrameSubPort
The number of number of tunneled frames received on subscriber port.
This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.53.1.1.3.1.9