WWP-ENVIRON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
17

wwpEnvPowerTable

table
.1.3.6.1.4.1.6141.2.13.1.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpEnvPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-ENVIRON-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-ENVIRON-MIB::wwpEnvPowerTable' 
A list of power supply entries.
wwpEnvPowerEntry row .1.3.6.1.4.1.6141.2.13.1.1.2.1.1
An entry in the powerTable providing objects for a
power supply.
Indexes
No indexes recorded
Column Syntax OID
wwpEnvPowerSupplyNum
Denotes the power supply.
Integer32 .1.3.6.1.4.1.6141.2.13.1.1.2.1.1.1
wwpEnvPowerSupplyState
Denotes the power supply's state.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.2.1.1.2
wwpEnvPowerSupplyType
Denotes the power supply type.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.2.1.1.3
wwpEnvPowerSupplyRedundancy
Denotes whether or not the power supply is redundant.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.2.1.1.4

wwpEnvFanModuleTable

table
.1.3.6.1.4.1.6141.2.13.1.1.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpEnvFanModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-ENVIRON-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-ENVIRON-MIB::wwpEnvFanModuleTable' 
A list of fan module entries.
wwpEnvFanModuleEntry row .1.3.6.1.4.1.6141.2.13.1.1.3.1.1
An entry in the fan module Table providing objects for a
fan module.
Indexes
No indexes recorded
Column Syntax OID
wwpEnvFanModuleNum
Denotes the Fan module.
Integer32 .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.1
wwpEnvFanModuleState
Denotes the fan modules state.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.2
wwpEnvFanAvgSpeed
The fans average speed in RPM. The average is calculated
on a continuous basis from system startup.
rpmInteger32 .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.3
wwpEnvFanCurrentSpeed
The current speed of the fan in RPM.
rpmInteger32 .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.4
wwpEnvFanMinSpeed
The minimum speed of the fan in RPM.
rpmInteger32 .1.3.6.1.4.1.6141.2.13.1.1.3.1.1.5

wwpEnvTempSensorTable

table
.1.3.6.1.4.1.6141.2.13.1.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpEnvTempSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-ENVIRON-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-ENVIRON-MIB::wwpEnvTempSensorTable' 
A list of Temp Sensors entries.
wwpEnvTempSensorEntry row .1.3.6.1.4.1.6141.2.13.1.1.4.1.1
An entry in the Temp Sensor Table providing objects for a
Temp Sensor.
Indexes
No indexes recorded
Column Syntax OID
wwpEnvTempSensorNum
Denotes the Temp sensor module.
Integer32 .1.3.6.1.4.1.6141.2.13.1.1.4.1.1.1
wwpEnvTempSensorValue
The value of temperature measured by the sensor
inside the device in degrees C.
degrees CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.13.1.1.4.1.1.2
wwpEnvTempSensorHighThreshold
The highest value that the object wwpEnvTempSensorValue
may obtain at which a wwpEnvMIBTempNotification is sent.
degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.13.1.1.4.1.1.3
wwpEnvTempSensorLowThreshold
The Lowest value that the object wwpEnvTempSensorValue
may obtain at which a wwpEnvMIBTempNotification is sent.
degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6141.2.13.1.1.4.1.1.4
wwpEnvTempSensorState
The state indicates whether the current temp is greater than,
equal to or less than the threshold state.
Enumeration .1.3.6.1.4.1.6141.2.13.1.1.4.1.1.5

wwpPortPowerMgmtTable

table
.1.3.6.1.4.1.6141.2.13.1.1.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpPortPowerMgmtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-ENVIRON-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-ENVIRON-MIB::wwpPortPowerMgmtTable' 
A list of Port Power Management entries. This table affects
the port power only when the input power supply is Battery.
wwpPortPowerMgmtEntry row .1.3.6.1.4.1.6141.2.13.1.1.5.1.1
An entry in the Port Power Mgmt Table providing objects for
Port Power Management.
Indexes
No indexes recorded
Column Syntax OID
wwpEnvPortBankId
Denotes the Port Bank module. A Bank is a set of ports
for the power management when the source of the input
power is switched to battery.
Integer32 .1.3.6.1.4.1.6141.2.13.1.1.5.1.1.1
wwpEnvPortMap
The port map associated with this BankId.
PortList
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6141.2.13.1.1.5.1.1.2
wwpEnvPortBankOn
The object to decide whether the port related to this Bank
should be on or not if the input power supply is switched
to Battery.
Enumerationr/w .1.3.6.1.4.1.6141.2.13.1.1.5.1.1.3