WHISP-APS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
8
Rows
8
Columns
160
whispLinkTable
table.1.3.6.1.4.1.161.19.3.1.4
·
1 row entry
·
95 columns
Uses the cambium variant from
Command help
/opt/observium/mibs/cambium.
Walk whispLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WHISP-APS-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WHISP-APS-MIB::whispLinkTable'
Link Status Table
Link Status
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| linkLUIDLUID number. | Integer32 Constraints: range: 2-239 | .1.3.6.1.4.1.161.19.3.1.4.1.1 | ||||||||||||||||||
| linkDescrA textual string containing information about the unit. This string should include the name of the manufacturer, the product name and the version of the hardware interface. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.2 | ||||||||||||||||||
| linkPhysAddressPhysical Address of the unit. | SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses. | .1.3.6.1.4.1.161.19.3.1.4.1.3 | ||||||||||||||||||
| linkMtuThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that … | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.4 | ||||||||||||||||||
| linkSpeedAn estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.5 | ||||||||||||||||||
linkOperStatusobsolete This variable is not used. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.4.1.6 | ||||||||||||||||||
| linkInOctetsThe total number of octets received on the interface, including framing characters. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.7 | ||||||||||||||||||
| linkInUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer protocol. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.8 | ||||||||||||||||||
| linkInNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.9 | ||||||||||||||||||
| linkInDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.10 | ||||||||||||||||||
| linkInErrorThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.11 | ||||||||||||||||||
| linkInUnknownProtosThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.12 | ||||||||||||||||||
| linkOutOctetsThe total number of octets transmitted out of the interface, including framing characters. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.13 | ||||||||||||||||||
| linkOutUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.14 | ||||||||||||||||||
| linkOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.15 | ||||||||||||||||||
| linkOutDiscardsThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.16 | ||||||||||||||||||
| linkOutErrorThe number of outbound packets that could not be transmitted because of errors. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.17 | ||||||||||||||||||
| linkOutQLenNumber of packets in output packet queue. | SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.18 | ||||||||||||||||||
| linkSessStateCurrent operational state of an interface. 0 = Idle 1 = In Session 2 = Clearing 3 = Re-registration downlink reset 4 = Authentication Challenge 5 = Registering 6 = Not in use | Enumeration Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.4.1.19 | ||||||||||||||||||
| linkESNLink Electronic serial number. It is MAC address. | SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses. | .1.3.6.1.4.1.161.19.3.1.4.1.20 | ||||||||||||||||||
| linkRSSIThe average RSSI reading of all packets received from an SM. Applicable to FSK radios only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.21 | ||||||||||||||||||
| linkAveJitterThe average Jitter reading of all packets received from an SM. Applicable to FSK radios only. | Unsigned32 Constraints: range: 0-15 | .1.3.6.1.4.1.161.19.3.1.4.1.22 | ||||||||||||||||||
| linkLastJitterLast jitter value. Applicable to FSK radios only. | Unsigned32 Constraints: range: 0-15 | .1.3.6.1.4.1.161.19.3.1.4.1.23 | ||||||||||||||||||
| linkAirDelayThe current round trip air delay in bits measured between the AP and SM. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.24 | ||||||||||||||||||
| linkRegCountThe number of times an SM has registered to an AP. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.25 | ||||||||||||||||||
| linkReRegCountThe number of times an SM has tried to register with the AP while it still has an active session with the AP. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.26 | ||||||||||||||||||
| linkTimeOutLink time out. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.27 | ||||||||||||||||||
| linkLastRSSIThe last RSSI reading of all packets received from an SM. Applicable to FSK radios only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.28 | ||||||||||||||||||
| sessionCountHow many times has this mac been in/out of session. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.29 | ||||||||||||||||||
| softwareVersionThe software version of registered SM. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.30 | ||||||||||||||||||
| softwareBootVersionThe software boot version of registered SM. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.31 | ||||||||||||||||||
| fpgaVersionThe FPGA version of registered SM. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.32 | ||||||||||||||||||
| linkSiteNameThe site name of the registered SM. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.33 | ||||||||||||||||||
| avgPowerLevelThe average power level of registered SM. For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM until new packets are received from the SM with it transmitting a… | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.34 | ||||||||||||||||||
| lastPowerLevelThe last power level of registered SM. For MIMO radios this is the combined receive power. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.35 | ||||||||||||||||||
| sesDownLinkRateDown link rate. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.36 | ||||||||||||||||||
| sesDownLinkLimitDown link limit. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.37 | ||||||||||||||||||
| sesUpLinkRateUplink rate. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.38 | ||||||||||||||||||
| sesUpLinkLimitUplink limit. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.39 | ||||||||||||||||||
| adaptRateAdapt rate of registered SM. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.40 | ||||||||||||||||||
| sesLoUpCIRLow priority up link CIR. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.41 | ||||||||||||||||||
| sesLoDownCIRLow priority down link CIR. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.42 | ||||||||||||||||||
| sesHiUpCIRHigh priority up link CIR. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.43 | ||||||||||||||||||
| sesHiDownCIRHigh priority down link CIR. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.44 | ||||||||||||||||||
| platformVerPlatform Version. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.45 | ||||||||||||||||||
| smSessionTmrSM session uptime | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.46 | ||||||||||||||||||
| smSessionSeqNumMismatchThe count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication challenge and authentication response messages. This status is only valid in a system where encryption is enabl… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.47 | ||||||||||||||||||
| dataVCNumThe normal priority Data VC number in use for this link. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.48 | ||||||||||||||||||
| hiPriQEnReturns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.4.1.49 | ||||||||||||||||||
| dataVCNumHiQThe high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.50 | ||||||||||||||||||
| linkInOctetsHiQThe total number of octets received on High Priority Queue, including framing characters. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.51 | ||||||||||||||||||
| linkInUcastPktsHiQThe number of subnetwork-unicast packets on High Priority Queue delivered to a higher-layer protocol. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.52 | ||||||||||||||||||
| linkInNUcastPktsHiQThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets on High Priority Queue delivered to a higher-layer protocol. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.53 | ||||||||||||||||||
| linkInDiscardsHiQThe number of inbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for disc… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.54 | ||||||||||||||||||
| linkInErrorHiQThe number of inbound packets on High Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.55 | ||||||||||||||||||
| linkInUnknownProtosHiQThe number of packets received on High Priority Queue via the interface which were discarded because of an unknown or unsupported protocol. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.56 | ||||||||||||||||||
| linkOutOctetsHiQThe total number of octets on High Priority Queue transmitted out of the interface, including framing characters. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.57 | ||||||||||||||||||
| linkOutUcastPktsHiQThe total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.58 | ||||||||||||||||||
| linkOutNUcastPktsHiQThe total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discard… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.59 | ||||||||||||||||||
| linkOutDiscardsHiQThe number of outbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could… | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.60 | ||||||||||||||||||
| linkOutErrorHiQThe number of outbound packets on High Priority Queue that could not be transmitted because of errors. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.61 | ||||||||||||||||||
| vcQOverflowThe number of packets dropped due to Queue overflow on VC. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.62 | ||||||||||||||||||
| vcQOverflowHiQThe number of packets dropped due to Queue overflow on High Priority VC, if enabled. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.63 | ||||||||||||||||||
| p7p8HiPriQEnReturns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.4.1.64 | ||||||||||||||||||
| p7p8HiPriQHi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.65 | ||||||||||||||||||
| linkAirDelaynsThe current round trip air delay in nanoseconds measured between the AP and SM. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.66 | ||||||||||||||||||
| linkQualityAPDataEngineering use only. The current link quality of the SM's data from the AP. This is relative to the current modulation rate (1X, 2X, 3X, etc). | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.67 | ||||||||||||||||||
| linkManagementIPManagement IP Address of the unit. 0 indicates SM is not publically addressable. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.161.19.3.1.4.1.69 | ||||||||||||||||||
| linkFragmentsReceived1XVerticalEngineering use only. Number of fragments received in 1x (QPSK) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.70 | ||||||||||||||||||
| linkFragmentsReceived2XVerticalEngineering use only. Number of fragments received in 2x (16-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.71 | ||||||||||||||||||
| linkFragmentsReceived3XVerticalEngineering use only. Number of fragments received in 3x (64-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.72 | ||||||||||||||||||
| linkFragmentsReceived4XVerticalEngineering use only. Number of fragments received in 4x (256-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.73 | ||||||||||||||||||
| signalToNoiseRatioVerticalEstimate of the receive signal to noise ratio in dB. For GenII OFDM and forward. For MIMO this is the vertical path. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.74 | ||||||||||||||||||
| radiusReplyMsgThe RADIUS Reply-Msg populated for the SM. This is only valid when using a backen AAA server. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.75 | ||||||||||||||||||
| autoUpdateStatusstatus of the auto update process | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.76 | ||||||||||||||||||
| radiusFramedIPAddressThis Attribute indicates the IP address to be configured for the SM management interface. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.161.19.3.1.4.1.77 | ||||||||||||||||||
| radiusFramedIPNetmaskThis Attribute indicates the netmask to be configured for the SM management interface. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.161.19.3.1.4.1.78 | ||||||||||||||||||
| radiusDefaultGatewayThis Attribute indicates the default gateway to be configured for the SM management interface. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.161.19.3.1.4.1.79 | ||||||||||||||||||
| linkFragmentsReceived1XHorizontalEngineering use only. Number of fragments received in 1x (QPSK) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.80 | ||||||||||||||||||
| linkFragmentsReceived2XHorizontalEngineering use only. Number of fragments received in 2x (16-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.81 | ||||||||||||||||||
| linkFragmentsReceived3XHorizontalEngineering use only. Number of fragments received in 3x (64-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.82 | ||||||||||||||||||
| linkFragmentsReceived4XHorizontalEngineering use only. Number of fragments received in 4x (256-QAM) modulation. For MIMO only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.4.1.83 | ||||||||||||||||||
| signalToNoiseRatioHorizontalEstimate of the receive signal to noise ratio in dB. MIMO radios only. For MIMO this is the horizontal path. If operating in MIMO-A this will return 0. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.84 | ||||||||||||||||||
| linkSignalStrengthRatioSignal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.86 | ||||||||||||||||||
| linkRadioDbmHorizontalReceive power level of the horizontal antenna in dBm. MIMO radios only. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.87 | ||||||||||||||||||
| linkRadioDbmVerticalReceive power level of the vertical antenna in dBm. MIMO radios only. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.88 | ||||||||||||||||||
| maxSMTxPwrReturns whether SM is transmitting at its configured max power level. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.89 | ||||||||||||||||||
| productTypeReturns which type of product the SM/BHS is. 450 platform only. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.4.1.90 | ||||||||||||||||||
| linkAdaptRateLowPriThe current transmitting rate of the low priority VC. 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO | Enumeration Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.4.1.91 | ||||||||||||||||||
| linkAdaptRateHighPriThe current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.4.1.92 | ||||||||||||||||||
| avgPowerLevelIntThe average power level of registered SM as Integer. For systems that support power control, this value can read '0' when the AP adjusts the transmit power of a SM until new packets are received from the SM with it tran… | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.93 | ||||||||||||||||||
| mimoPowerLevelVerticalFor MIMO radios, the Vertical power level of registered SM as Integer. The Vertical Power (+45) level in case of 2.4GHz Dual slant MIMO | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.94 | ||||||||||||||||||
| mimoPowerLevelHorizontalFor MIMO radios, the Horizontal power level of registered SM as Integer. The Horizontal Power(-45) level in case of 2.4GHz Dual slant MIMO | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.95 | ||||||||||||||||||
| linkSwVersionThe swversion of registered SM, to be used internally. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.4.1.96 | ||||||||||||||||||
| spatialFrequencyThe spatial frequency of registered SM. Spatial Frequency is the phase advance of the wavefront from one antenna column to the next caused by the angle at which the wavefront impinges on the array. It is represented i… | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.4.1.97 |
whispFailedRegTable
table.1.3.6.1.4.1.161.19.3.1.8
·
1 row entry
·
5 columns
Uses the cambium variant from
Command help
/opt/observium/mibs/cambium.
Walk whispFailedRegTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WHISP-APS-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WHISP-APS-MIB::whispFailedRegTable'
List of link test results
List of Failed ESNs
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| regGrantReasonThe registration failure reason | Enumeration Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.8.1.1 | ||||||||||||||||||||||||||
| regFailESNThe ESN that failed to register | SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses. | .1.3.6.1.4.1.161.19.3.1.8.1.2 | ||||||||||||||||||||||||||
| regFailTimeThe number of ticks that occurred when the ESN failed to register | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.8.1.3 | ||||||||||||||||||||||||||
| regFailSeqNumThe sequence when the register failure was given. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.161.19.3.1.8.1.4 | ||||||||||||||||||||||||||
| regFailReasonTextThe text description of the failure. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.8.1.5 |
whispApsRFConfigRadios
table.1.3.6.1.4.1.161.19.3.1.10.1
·
1 row entry
·
6 columns
Uses the cambium variant from
Command help
/opt/observium/mibs/cambium.
Walk whispApsRFConfigRadios
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WHISP-APS-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WHISP-APS-MIB::whispApsRFConfigRadios'
Radio configuration table.
Radio configuration entry.
Indexes
No indexes recorded
| Column | Syntax | OID | ||
|---|---|---|---|---|
| radioFreqCarrierRF Frequency. Please see the whispBoxRFPhysicalRadioFrequencies SNMP table for a list of available frequencies. 0: wired. | kHzEnumerationr/w Enumerated Values:
| .1.3.6.1.4.1.161.19.3.1.10.1.1.1 | ||
| radioDownlinkPercentThis is the percentage of frame data space allocated for downlink. Various radio platforms and regions will have different allowable downlink percentages. | %Integer32r/w Constraints: range: 1-99 | .1.3.6.1.4.1.161.19.3.1.10.1.1.2 | ||
| radioMaxRangeAccess point max range. | milesInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.10.1.1.3 | ||
| radioControlSlotsTotal number of contention slots for HW Scheduling Point-to-Mulitpoint mode (Not applicable for PtoP radios). For PMP 450 the minimum is 1 control slot, others minimum is zero. Maximum contention slots is 15. | Integer32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.10.1.1.4 | ||
| radioTransmitOutputPowerTransmitter output power. | dBmInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.10.1.1.5 | ||
| radioColorCodeColor code. | Integer32r/w Constraints: range: 0-254 | .1.3.6.1.4.1.161.19.3.1.10.1.1.6 |
.1.3.6.1.4.1.161.19.3.1.12.4
·
1 row entry
·
14 columns
Uses the cambium variant from
Command help
/opt/observium/mibs/cambium.
Walk whispApsFrUtlStatsMumimoSpatialTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WHISP-APS-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WHISP-APS-MIB::whispApsFrUtlStatsMumimoSpatialTable'
MU-MIMO Spatial Utilization Metrics.
MU-MIMO Spatial Utilization Metrics.
| Column | Syntax | OID |
|---|---|---|
| frUtlMumimoDownlinkUtilizationSfBinSpatial Frequency Bin. MU-MIMO only. | Integer32 Constraints: range: 0-32 | .1.3.6.1.4.1.161.19.3.1.12.4.1.1 |
| frUtlMumimoDownlinkUtilizationSfRangeSpatial Frequency Range. MU-MIMO only. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.12.4.1.2 |
| frUtlMumimoDownlinkUtilizationAzimuthAzimuth Ranges per Spatial Frequency bin. MU-MIMO only. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.12.4.1.3 |
| frUtlMumimoDownlinkUtilizationVcRangeVCs in Spatial Frequency Range. MU-MIMO only. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.12.4.1.4 |
| frUtlMumimoDownlinkInstantaneousUtilizationInstantanous MU-MIMO downlink utilization. This updates every 500ms. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.5 |
| frUtlLowTotalMumimoDownlinkUtilizationPercentage of total MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.6 |
| frUtlMedTotalMumimoDownlinkUtilizationPercentage of total MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.7 |
| frUtlHighTotalMumimoDownlinkUtilizationPercentage of total MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.8 |
| frUtlLowMaxMumimoDownlinkUtilizationMaximum MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.9 |
| frUtlMedMaxMumimoDownlinkUtilizationMaximum MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.10 |
| frUtlHighMaxMumimoDownlinkUtilizationMaximum MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.11 |
| frUtlLowMinMumimoDownlinkUtilizationMinimum MU-MIMO downlink utilization in the last 1 minute. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.12 |
| frUtlMedMinMumimoDownlinkUtilizationMinimum MU-MIMO downlink utilization in the last 5 minutes. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.13 |
| frUtlHighMinMumimoDownlinkUtilizationMinimum MU-MIMO downlink utilization in the last 15 minutes. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.4.1.14 |
.1.3.6.1.4.1.161.19.3.1.12.5
·
1 row entry
·
4 columns
Uses the cambium variant from
Command help
/opt/observium/mibs/cambium.
Walk whispApsFrUtlStatsMumimoDistributionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WHISP-APS-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WHISP-APS-MIB::whispApsFrUtlStatsMumimoDistributionTable'
MU-MIMO Distribution Metrics.
MU-MIMO Distribution Metrics.
| Column | Syntax | OID |
|---|---|---|
| frUtlMumimoDownlinkDistributionIndexMU-MIMO downlink Distribution Table Index. MU-MIMO only. | Integer32 Constraints: range: 0-9 | .1.3.6.1.4.1.161.19.3.1.12.5.1.1 |
| frUtlMumimoDownlinkDistributionGroupMU-MIMO downlink Distribution Group. MU-MIMO only. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.12.5.1.2 |
| frUtlMumimoDownlinkDistributionVcMU-MIMO downlink VC Distribution. MU-MIMO only. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.161.19.3.1.12.5.1.3 |
| frUtlMumimoDownlinkDistributionMedianSlotCountMU-MIMO downlink Median Slot Count Distribution. MU-MIMO only. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.161.19.3.1.12.5.1.4 |
whispApsLQILowInterval
table.1.3.6.1.4.1.161.19.3.1.13.1
·
1 row entry
·
12 columns
Uses the cambium variant from
Command help
/opt/observium/mibs/cambium.
Walk whispApsLQILowInterval
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WHISP-APS-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WHISP-APS-MIB::whispApsLQILowInterval'
Link Quality Indicator one minute interval table.
Link Quality Indicator for one minute Interval entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
| lqiLowLinkLUIDLogical User Identfication (LUID) number | Integer32 Constraints: range: 2-239 | .1.3.6.1.4.1.161.19.3.1.13.1.1.1 |
| lqiLowLQILink Quality Indicator for one minute interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-registrations and beacon percentage. | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.1.1.2 |
| lqiLowDownlinkQualityIndexDownlink Quality Index for one minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.1.1.3 |
| lqiLowDownlinkAverageActualRateDownlink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.1.1.4 |
| lqiLowDownlinkExpectedRateDownlink Expected Rate in tenths for one minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.1.1.5 |
| lqiLowUplinkQualityIndexUplink Quality Index for one minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.1.1.6 |
| lqiLowUplinkAverageActualRateUplink Actual average transmit modulation rate in tenths for one minute interval. eg: 73 is 7.3X | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.1.1.7 |
| lqiLowUplinkExpectedRateUplink Expected Rate in tenths for one minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.1.1.8 |
| lqiLowBeaconQualityIndexBeacon Quality Index for one minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.1.1.9 |
| lqiLowBeaconPercentReceived beacon percentage for one minute interval | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.1.1.10 |
| lqiLowReRegQualityIndexBeacon Quality Index for one minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.1.1.11 |
| lqiLowReRegCountRe Registration count for one minute interval | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.1.1.12 |
whispApsLQIMidInterval
table.1.3.6.1.4.1.161.19.3.1.13.2
·
1 row entry
·
12 columns
Uses the cambium variant from
Command help
/opt/observium/mibs/cambium.
Walk whispApsLQIMidInterval
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WHISP-APS-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WHISP-APS-MIB::whispApsLQIMidInterval'
Link Quality Indicator five minutes interval table.
Link Quality Indicator for five minutes interval entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
| lqiMidLinkLUIDLogical User Identfication (LUID) number | Integer32 Constraints: range: 2-239 | .1.3.6.1.4.1.161.19.3.1.13.2.1.1 |
| lqiMidLQILink Quality Indicator for five minutes interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-registrations and beacon percentage. | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.2.1.2 |
| lqiMidDownlinkQualityIndexDownlink Quality Index for five minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.2.1.3 |
| lqiMidDownlinkAverageActualRateDownlink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.2.1.4 |
| lqiMidDownlinkExpectedRateDownlink Expected Rate in tenths for five minute interval. eg: 80 is 8X | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.2.1.5 |
| lqiMidUplinkQualityIndexUplink Quality Index for five minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.2.1.6 |
| lqiMidUplinkAverageActualRateUplink Actual average transmit modulation rate in tenths for five minute interval. eg: 73 is 7.3X | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.2.1.7 |
| lqiMidUplinkExpectedRateUplink Expected Rate in tenths for five minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.2.1.8 |
| lqiMidBeaconPercentReceived beacon percent for five minute interval | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.2.1.9 |
| lqiMidBeaconQualityIndexBeacon Quality Index for five minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.2.1.10 |
| lqiMidReRegCountRe Registration count for five minute interval | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.2.1.11 |
| lqiMidReRegQualityIndexBeacon Quality Index for five minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.2.1.12 |
whispApsLQIHighInterval
table.1.3.6.1.4.1.161.19.3.1.13.3
·
1 row entry
·
12 columns
Uses the cambium variant from
Command help
/opt/observium/mibs/cambium.
Walk whispApsLQIHighInterval
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WHISP-APS-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WHISP-APS-MIB::whispApsLQIHighInterval'
Link Quality Indicator fifteen minutes interval table.
Link Quality Indicator for fifteen minutes interval entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
| lqiHighLinkLUIDLogical User Identfication (LUID) number | Integer32 Constraints: range: 2-239 | .1.3.6.1.4.1.161.19.3.1.13.3.1.1 |
| lqiHighLQILink Quality Indicator for fifteen minutes interval. Ranges from 0 to 100 where 100 is the best. It's calculated based on receive power, modulation rate, re-registrations and beacon percentage. | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.3.1.2 |
| lqiHighDownlinkQualityIndexDownlink Quality Index for fifteen minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.3.1.3 |
| lqiHighDownlinkAverageActualRateDownlink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.3.1.4 |
| lqiHighDownlinkExpectedRateDownlink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.3.1.5 |
| lqiHighUplinkQualityIndexUplink Quality Index for fifteen minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.3.1.6 |
| lqiHighUplinkAverageActualRateUplink Actual average transmit modulation rate in tenths for fifteen minute interval. eg: 73 is 7.3X | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.3.1.7 |
| lqiHighUplinkExpectedRateUplink Expected Rate in tenths for fifteen minute interval. eg: 80 is 8X This is based upon the uplink receive power and does not take into account interference. | Integer32 Constraints: range: 0-80 | .1.3.6.1.4.1.161.19.3.1.13.3.1.8 |
| lqiHighBeaconQualityIndexBeacon Quality Index for fifteen minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.3.1.9 |
| lqiHighBeaconPercentReceived beacon percent for fifteen minute interval | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.3.1.10 |
| lqiHighReRegQualityIndexBeacon Quality Index for fifteen minute interval in percentage. 100% is best quality | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.3.1.11 |
| lqiHighReRegCountRe Registration count for fifteen minute interval | Integer32 Constraints: range: 0-100 | .1.3.6.1.4.1.161.19.3.1.13.3.1.12 |