Standard view Table view

WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB

        The MIB module describes generic Ipsec Endpoint Pair information
of WatchGuard system.  Mainly, the information 
obtained from this MIB is used to constructed topological
view of IPSec security gateways that are connected by
IPSec tunnels. 
           
An IPSec Endpoint Pair is a pair of security gateways that
are connected with 0 or more IPSec SA's in tunnel mode.  
It contains information of aggregated information 
of tunnel mode SA's between two security gateways.
        
An IPSec Endpoint Pair is identified by a pair of IP addresses.
Therefore, if an IPSec security gateway X has 2 external
IP addresses while IPsec secruity gateway Y has 3 external
IP addresses, there are potentially 6 IPsec Endpoint Pairs
between X and Y.
Source file
WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB
Last revised
Identity
wgIpsecEndpointPairModule
Base OID
1.3.6.1.4.1.3097.5
Imported Objects
SNMPv2-SMI enterprises Gauge32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
WATCHGUARD-SMI watchguard
Net-SNMP examples using the watchguard MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB' -M '/opt/observium/mibs/watchguard:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB::wgIpsecEndpointPairModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB' -M '/opt/observium/mibs/watchguard:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB::wgIpsecEndpointPairModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (42)
wgIpsecEndpointPairModule
.1.3.6.1.4.1.3097.5
wgIpsecEndpointPairMIB
.1.3.6.1.4.1.3097.5.1
wgIpsecEndpointPair
.1.3.6.1.4.1.3097.5.1.1
wgIpsecEndpointPairNum
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3097.5.1.1.1
wgIpsecEndpointPairTable
.1.3.6.1.4.1.3097.5.1.1.2
wgIpsecEndpointPairEntry
wgIpsecEndpointPairIndex
 .1.3.6.1.4.1.3097.5.1.1.2.1
wgIpsecEndpointPairIndex
Integer32
 .1.3.6.1.4.1.3097.5.1.1.2.1.1
wgIpsecEndpointPairDecryptErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.1.2.1.10
wgIpsecEndpointPairAuthErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.1.2.1.11
wgIpsecEndpointPairReplayErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.1.2.1.12
wgIpsecEndpointPairPolicyErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.1.2.1.13
wgIpsecEndpointPairPadErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.1.2.1.14
wgIpsecEndpointPairOtherReceiveErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.1.2.1.15
wgIpsecEndpointPairSendErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.1.2.1.16
wgIpsecEndpointPairLocalAddr
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.3097.5.1.1.2.1.2
wgIpsecEndpointPairPeerAddr
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.3097.5.1.1.2.1.3
wgIpsecEndpointPairInSAs
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3097.5.1.1.2.1.4
wgIpsecEndpointPairOutSAs
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3097.5.1.1.2.1.5
wgIpsecEndpointPairInAccKbytes
KbytesSNMPv2-SMICounter64
 .1.3.6.1.4.1.3097.5.1.1.2.1.6
wgIpsecEndpointPairOutAccKbytes
KbytesSNMPv2-SMICounter64
 .1.3.6.1.4.1.3097.5.1.1.2.1.7
wgIpsecEndpointPairInPackets
SNMPv2-SMICounter64
 .1.3.6.1.4.1.3097.5.1.1.2.1.8
wgIpsecEndpointPairOutPackets
SNMPv2-SMICounter64
 .1.3.6.1.4.1.3097.5.1.1.2.1.9
wgIpsecEndpointPairStatistics
.1.3.6.1.4.1.3097.5.1.2
wgIpsecEndpointPairTotalInSAs
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.3097.5.1.2.1
wgIpsecEndpointPairTotalPolicyErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.2.10
wgIpsecEndpointPairTotalPadErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.2.11
wgIpsecEndpointPairTotalOtherReceiveErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.2.12
wgIpsecEndpointPairTotalSendErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.2.13
wgIpsecEndpointPairTotalOutSAs
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.3097.5.1.2.2
wgIpsecEndpointPairTotalInAccKbytes
KbytesSNMPv2-SMICounter64
 .1.3.6.1.4.1.3097.5.1.2.3
wgIpsecEndpointPairTotalOutAccKbytes
SNMPv2-SMICounter64
 .1.3.6.1.4.1.3097.5.1.2.4
wgIpsecEndpointPairTotalInPackets
KbytesSNMPv2-SMICounter64
 .1.3.6.1.4.1.3097.5.1.2.5
wgIpsecEndpointPairTotalOutPackets
SNMPv2-SMICounter64
 .1.3.6.1.4.1.3097.5.1.2.6
wgIpsecEndpointPairTotalDecryptErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.2.7
wgIpsecEndpointPairTotalAuthErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.2.8
wgIpsecEndpointPairTotalReplayErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.3097.5.1.2.9
wgIpsecEndpointPairPeerIPToTunnel
.1.3.6.1.4.1.3097.5.1.3
wgIpsecEndpointPairPeerIPToTunnelNum
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3097.5.1.3.1
wgIpsecEndpointPairPeerIPToTunnelTable
.1.3.6.1.4.1.3097.5.1.3.2
wgIpsecEndpointPairPeerIPToTunnelEntry
wgIpsecEndpointPairPeerIPToTunnelPeerIPwgIpsecEndpointPairPeerIPToTunnelTunnelID
 .1.3.6.1.4.1.3097.5.1.3.2.1
wgIpsecEndpointPairPeerIPToTunnelPeerIP
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.3097.5.1.3.2.1.1
wgIpsecEndpointPairPeerIPToTunnelTunnelID
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.3097.5.1.3.2.1.2
Dependencies (2) 2 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. WATCHGUARD-SMIwatchguard
  3. WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIBwatchguardselected