VES1724-58V-MIB Table View

RFC1213-MIBifIndex aclPortProfileName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.890.1.5.12.49.1.2.1.2

aclPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.1.4 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aclPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::aclPortTable'

Configures references to specified ACL rule for the specified port.

aclPortEntry row .1.3.6.1.4.1.890.1.5.12.49.1.4.1

Indexes

Column Syntax OID

aclPortProfileName

Configures references to specified ACL rule.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.1.4.1.1

aclPortRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.1.4.1.2

aclProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.1.6 · 1 row entry · 39 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aclProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::aclProfileTable'

Configures ACL profile.

aclProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.1.6.1

Indexes

aclProfileName

Column Syntax OID

aclProfileName

'multicast' reserved.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.1

aclProfileActionMask

Defines action(s) for the ACL profile. Every acktion mask bit
has its own referenced action parameter(s).
drop(0) - no action paramter
rateLimit(1) - aclProfileActionRate
changeInnerPbit(2) - aclProfileActionInnerPbit
c…

Bitsr/w

Enumerated Values:

0	drop
1	rateLimit
2	changeInnerPbit
3	changeOuterPbit
4	changeDscp
5	changeTrafficClass
6	changeQos

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.2

aclProfileFieldMask

Defines the compared fields mask for the ACL profile.
Every field mask bit has its own referenced field parameter(s).
etherType(0) - aclProfileRuleEtype
sourceMac(1) - aclProfileRuleSrcMac
destMac(2) - aclProfileRuleDes…

Bitsr/w

Enumerated Values:

0	etherType
1	sourceMac
2	destMac
3	sourceOui
4	destOui
5	innerVlan
6	outerVlan
7	innerPbit
8	outerPbit
9	sourceIpRange
10	destIpRange
11	sourceIp
12	destIp
13	protocol
14	ipPrecedence
15	dscp
16	sourceIpv6
17	destIpv6
18	nextHeader
19	trafficClass
20	sourceL4PortRange
21	destL4PortRange
22	sourceL4Port
23	destL4Port

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.3

aclProfileRuleEtype

Matches specified Ether Type.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.4

aclProfileRuleSrcMac

Matches specified source MAC.

RFC1213-MIBPhysAddressr/w

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.5

aclProfileRuleDestMac

Matches specified destination MAC.

RFC1213-MIBPhysAddressr/w

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.6

aclProfileRuleSrcOui

Matches specified source MAC OUI.

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.7

aclProfileRuleDestOui

Matches specified destination MAC OUI.

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.8

aclProfileRuleInnerVlan

Matches specified inner VLAN ID.

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.9

aclProfileRuleOuterVlan

Matches specified outer VLAN ID.

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.10

aclProfileRuleInnerPbit

Matches specified inner VLAN PBIT.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.11

aclProfileRuleOuterPbit

Matches specified outer VLAN PBIT.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.12

aclProfileRuleSrcIpRange

Matches specified source IP range.

aclProfileRuleDestIpRange

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.13

aclProfileRuleSrcIpMask

The subnet mask of source IP range.

Integer32r/w

Constraints:
range: 16-31

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.14

Matches specified destination IP range.

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.15

aclProfileRuleDestIpMask

The subnet mask of destination IP range.

Integer32r/w

Constraints:
range: 16-31

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.16

aclProfileRuleSrcIp

Matches specified source IP address.

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.17

aclProfileRuleDestIp

Matches specified destination IP address.

aclProfileRuleIpPrecedence

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.18

aclProfileRuleProtocol

Matches specified IP protocol.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.19

Matches specified IP precedence.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.20

aclProfileRuleDscp

Matches specified IP DSCP.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.21

aclProfileRuleSrcIpv6

Matches specified source IPv6 address.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.22

aclProfileRuleDestIpv6

Matches specified destination IPv6 address.

aclProfileRuleTrafficClass

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.23

aclProfileRuleNextHeader

Matches specified IPv6 next header.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.24

Matches specified IPv6 traffic class.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.25

aclProfileRuleSrcL4StartPort

Matches specified layer 4 source port range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.26

aclProfileRuleSrcL4EndPort

Matches specified layer 4 source port range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.27

aclProfileRuleDestL4StartPort

Matches specified layer 4 dest port range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.28

aclProfileRuleDestL4EndPort

Matches specified layer 4 dest port range.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.29

aclProfileRuleSrcL4Port

Matches specified layer 4 source port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.30

aclProfileRuleDestL4Port

Matches specified layer 4 dest port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.31

aclProfileActionRate

Limits receiving rate of matched packets.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.32

aclProfileActionInnerPbit

Change inner VLAN pbit of matched packets.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.33

aclProfileActionOuterPbit

Change outer VLAN pbit of matched packets.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.34

aclProfileActionDscp

Change IP DSCP of matched packets.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.35

aclProfileActionTrafficClass

Change IPv6 traffic class of matched packets.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.36

aclProfileActionQos

Change Qos of matched packets.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.37

aclProfileRowStatus

Row status of the table entry. 'multicast' reserved.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.38

aclProfilePriority

Priority of the ACL profile in hexadecimal.

OctetString

.1.3.6.1.4.1.890.1.5.12.49.1.6.1.39

dot1xRadiusServerTable

table

.1.3.6.1.4.1.890.1.5.12.49.1.20.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dot1xRadiusServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dot1xRadiusServerTable'

A table that contains Radius Server information for 802.1x.

dot1xRadiusServerEntry row .1.3.6.1.4.1.890.1.5.12.49.1.20.3.1

The entry of Radius Server table.

Indexes

dot1xRadiusServerIndex

Column	Syntax	OID
dot1xRadiusServerIndex The identity of the RADIUS server.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.1.20.3.1.1`
dot1xRadiusServerIp The IP address of the Radius Server.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.1.20.3.1.2`
dot1xRadiusServerPort The UDP port of the Radius Server.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.890.1.5.12.49.1.20.3.1.3`
dot1xRadiusServerSecret The shared secret of the Radius Server.	OctetStringr/w Constraints: `range: 1-31`	`.1.3.6.1.4.1.890.1.5.12.49.1.20.3.1.4`

dot1xPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.1.20.4 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dot1xPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dot1xPortTable'

This table includes 802.1x port configuration.

dot1xPortEntry row .1.3.6.1.4.1.890.1.5.12.49.1.20.4.1

An entry in dot1xPortTable.

Indexes

dot1xPortRadiusServerIndex

Column Syntax OID

The index of the RADIUS server in dot1xRadiusServerTable

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.890.1.5.12.49.1.20.4.1.1

dot1xPortEnable

Enable/disable 802.1x for the port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.1.20.4.1.2

dot1xPortCircuitIDEnable

Enable/disable insert the circuit ID information.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.1.20.4.1.3

dot1xPortCircuitIDInfo

Configures Dot1X circuit ID format
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>?,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port n…

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.890.1.5.12.49.1.20.4.1.4

dot1xUserProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.1.20.5 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dot1xUserProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dot1xUserProfileTable'

This table includes user profile setting for 802.1x configuration.

dot1xUserProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.1.20.5.1

An entry in dot1xUserProfileTable.

Indexes

dot1xUserProfileName

Column Syntax OID

dot1xUserProfileName

Name of Dot1X user profile

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.1.20.5.1.1

dot1xUserProfilePassword

Configure the password.
Can input with plain text or ciphertext.
plain text: Up to 31 printable characters.
ciphertext: 95 characters with special format and generated by device from plain text.

OctetStringr/w

Constraints:
range: 1-95

.1.3.6.1.4.1.890.1.5.12.49.1.20.5.1.2

dot1xUserProfileRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.1.20.5.1.3

dot1xStatsPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.1.20.6 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dot1xStatsPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dot1xStatsPortTable'

This table includes port statistics of 802.1x .

dot1xStatsPortEntry row .1.3.6.1.4.1.890.1.5.12.49.1.20.6.1

An entry in dot1xStatsPortTable.

Indexes

RFC1213-MIBifIndex aclPacketTypeFilterVlanId

Column	Syntax	OID
dot1xStatsPortReAuthCount Display how many times each port re-authroize	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.1.20.6.1.1`

aclFieldPriorityTable

table

.1.3.6.1.4.1.890.1.5.12.49.1.21 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aclFieldPriorityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::aclFieldPriorityTable'

Configures ACL field priority table.

aclFieldPriorityEntry row .1.3.6.1.4.1.890.1.5.12.49.1.21.1

Indexes

aclFieldPriorityIndex

Column Syntax OID

aclFieldPriorityIndex

The field index of field priority table.

Enumeration

Enumerated Values:

1	sourceMac
2	destMac
3	sourceOui
4	destOui
5	sourceIpAddress
6	sourceIpRange
7	destIpAddress
8	destIpRange
9	sourceIpv6
10	destIpv6
11	sourceL4Port
12	sourceL4PortRange
13	destL4Port
14	destL4PortRange
15	outerVlan
16	innerVlan
17	outerPbit
18	innerPbit
19	etherType
20	nextHeader
21	trafficClass
22	ipPrecedence
23	dscp
24	protocol

.1.3.6.1.4.1.890.1.5.12.49.1.21.1.1

aclFieldPriorityValue

The field priority of field priority table.
Accept range:01 to ff in hex.

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.49.1.21.1.2

aclPacketTypeFilterTable

table

.1.3.6.1.4.1.890.1.5.12.49.1.22 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aclPacketTypeFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::aclPacketTypeFilterTable'

Configures ACL packet type filter table.

aclPacketTypeFilterEntry row .1.3.6.1.4.1.890.1.5.12.49.1.22.1

Indexes

Column Syntax OID

aclPacketTypeFilterVlanId

Packet type filter VLAN ID.

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.1.22.1.1

aclPacketTypeFilterActionMask

Defines action(s) for the packet filter.
At least one bit must be set.

Bitsr/w

Enumerated Values:

0	dropIgmp
1	dropEapol
2	dropDhcp
3	dropNetBios
4	dropArp
5	dropIp
6	dropPppoe
7	pppoeOnly

.1.3.6.1.4.1.890.1.5.12.49.1.22.1.2

aclPacketTypeFilterRowStatus

Row status of the table entry.
Remove the entry to accept all packet type for the vlan.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.1.22.1.3

currAlarmTable

table

.1.3.6.1.4.1.890.1.5.12.49.2.2 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk currAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::currAlarmTable'

Displays current alarm.

currAlarmEntry row .1.3.6.1.4.1.890.1.5.12.49.2.2.1

Indexes

currAlarmIndex

Column Syntax OID

currAlarmIndex

Index of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.1

currAlarmCondId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.2

currAlarmOccurTime

Alarm occurence time (in hundredths of a second) since the system was last re-initialized.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.3

currAlarmTrapOid

Trap OID of the alarm.

ObjectIdentifier

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.4

currAlarmParam1

The 1st parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.5

currAlarmParam2

The 2nd parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.6

currAlarmParam3

The 3rd parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.7

currAlarmParam4

The 4th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.8

currAlarmParam5

The 5th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.9

currAlarmParam6

The 6th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.10

currAlarmParam7

The 7th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.11

currAlarmParam8

The 8th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.12

currAlarmParam9

The 9th parameter of the alarm.

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.13

currAlarmTimeDescr

The string representation of occurence time (YYYY/MM/DD HH:MM:SS).

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.14

currAlarmSeverity

The severity of the alarm.

Enumeration

Enumerated Values:

1	critical
2	major
3	minor
4	warning

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.15

currAlarmDescr

The description of the alarm.

.1.3.6.1.4.1.890.1.5.12.49.2.2.1.16

histAlarmTable

table

.1.3.6.1.4.1.890.1.5.12.49.2.3 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk histAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::histAlarmTable'

Displays alarm history.

histAlarmEntry row .1.3.6.1.4.1.890.1.5.12.49.2.3.1

Indexes

histAlarmIndex

Column Syntax OID

histAlarmIndex

Index of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.1

histAlarmCondId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.2

histAlarmOccurTime

Alarm occurence time (in hundredths of a second) since the system was last re-initialized.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.3

histAlarmTrapOid

Trap OID of the alarm.

ObjectIdentifier

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.4

histAlarmParam1

The 1st parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.5

histAlarmParam2

The 2nd parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.6

histAlarmParam3

The 3rd parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.7

histAlarmParam4

The 4th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.8

histAlarmParam5

The 5th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.9

histAlarmParam6

The 6th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.10

histAlarmParam7

The 7th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.11

histAlarmParam8

The 8th parameter of the alarm.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.12

histAlarmParam9

The 9th parameter of the alarm.

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.13

histAlarmTimeDescr

The string representation of occurence time (YYYY/MM/DD HH:MM:SS).

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.14

histAlarmSeverity

The severity of the alarm.

Enumeration

Enumerated Values:

1	critical
2	major
3	minor
4	warning
5	event

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.15

histAlarmDescr

The description of the alarm.

.1.3.6.1.4.1.890.1.5.12.49.2.3.1.16

alarmConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.2.4 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk alarmConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::alarmConfTable'

Configures specified alarm definition.
No show event alarm.

alarmConfEntry row .1.3.6.1.4.1.890.1.5.12.49.2.4.1

Indexes

alarmConfTrapOid

Column Syntax OID

alarmConfTrapOid

alarm condition code

ObjectIdentifier

.1.3.6.1.4.1.890.1.5.12.49.2.4.1.1

alarmConfSeverity

alarm severity.
event(5): No permit editing the severity of alarm with event severity.
Read-only. No permit editing the alarm severity to be event.

Enumerationr/w

Enumerated Values:

1	critical
2	major
3	minor
4	warning
5	event

.1.3.6.1.4.1.890.1.5.12.49.2.4.1.2

alarmConfLogFacility

alarm syslog-facility

Enumerationr/w

Enumerated Values:

1	local1
2	local2
3	local3
4	local4
5	local5
6	local6
7	local7

.1.3.6.1.4.1.890.1.5.12.49.2.4.1.3

alarmConfTarget

alarm issue target

Enumerationr/w

Enumerated Values:

1	snmp
2	syslog
3	all
4	none

.1.3.6.1.4.1.890.1.5.12.49.2.4.1.4

alarmSeverityPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.2.6 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk alarmSeverityPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::alarmSeverityPortTable'

Configures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for each port.

alarmSeverityPortEntry row .1.3.6.1.4.1.890.1.5.12.49.2.6.1

Indexes

dhcpL2agOpt18CircuitIDEnable

Column Syntax OID

alarmSeverityPortThresh

Enumerationr/w

Enumerated Values:

1	critical
2	major
3	minor
4	warning

.1.3.6.1.4.1.890.1.5.12.49.2.6.1.1

externalAlarmTable

table

.1.3.6.1.4.1.890.1.5.12.49.2.8 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk externalAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::externalAlarmTable'

Configures alarm input description.

externalAlarmEntry row .1.3.6.1.4.1.890.1.5.12.49.2.8.1

Indexes

externalAlarmIndex

Column	Syntax	OID
externalAlarmIndex External alarm index	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.890.1.5.12.49.2.8.1.1`
externalAlarmName External alarm name	OctetStringr/w Constraints: `range: 0-31`	`.1.3.6.1.4.1.890.1.5.12.49.2.8.1.2`

dhcpL2agTable

table

.1.3.6.1.4.1.890.1.5.12.49.3.1 · 1 row entry · 12 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpL2agTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dhcpL2agTable'

A table that contains DHCP L2 agent configuration.

dhcpL2agEntry row .1.3.6.1.4.1.890.1.5.12.49.3.1.1

An entry of dhcpL2agTable.

Indexes

dhcpL2agVlanId

Column Syntax OID

dhcpL2agVlanId

Specify the VLAN with DHCP transparent or DHCP L2 Agent function

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.1

dhcpL2agMode

Specify the DHCP mode
dhcpTransparent(1) - DHCP packets are transparent
dhcpL2Agent(2) - DHCP L2 Agent function is enabled

Enumerationr/w

Enumerated Values:

1	dhcpTransparent
2	dhcpL2Agent

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.2

dhcpL2agLdraEnable

Enable/disable LightWeight DHCPv6 Relay agent in l2agent mode

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.3

Enable/disable insert the option18 circuit ID to DHCP packet in l2agent mode.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.4

dhcpL2agOpt18CircuitIDInfo

User specific DHCP option18 circuit ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>?,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configu…

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.5

dhcpL2agOpt37RemoteIDEnable

Enable/disable insert the option37 remote ID to DHCP packet in l2agent mode.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.6

dhcpL2agOpt37RemoteIDInfo

User specific DHCP option37 remote ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>?,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configur…

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.7

dhcpL2agOpt82CircuitIDEnable

Enable/disable insert the option82 circuit ID to DHCP packet in l2agent mode.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.8

dhcpL2agOpt82CircuitIDInfo

User specific DHCP option82 circuit ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>?,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configu…

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.9

dhcpL2agOpt82RemoteIDEnable

Enable/disable insert the option82 remote ID to DHCP packet in l2agent mode.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.10

dhcpL2agOpt82RemoteIDInfo

User specific DHCP option82 remote ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>?,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configur…

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.11

dhcpL2agRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.3.1.1.12

dhcpSnoopPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.3.2.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnoopPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dhcpSnoopPortTable'

A table that contains DHCP Snoop configuration for specified UNI ports.

dhcpSnoopPortEntry row .1.3.6.1.4.1.890.1.5.12.49.3.2.1.1

Configures DHCP snooping for specified ports.

Indexes

dhcpSnoopPortIpMacBindingEnable

Column Syntax OID

Enables IP-MAC binding on specified UNI ports.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.3.2.1.1.1

dhcpSnoopPortMaxLeaseCount

Configures DHCP Snooping database max lease count for specified UNI ports.

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.49.3.2.1.1.2

dhcpSnoopPortDbFlush

Set 1 to flush DHCP database for specified UNI ports.

RFC1213-MIBifIndex dhcpSnoopDbIpType dhcpSnoopDbIp

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.3.2.1.1.3

dhcpSnoopDbTable

table

.1.3.6.1.4.1.890.1.5.12.49.3.2.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnoopDbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dhcpSnoopDbTable'

A table that contains DHCP Snoop database on specified UNI ports.

dhcpSnoopDbEntry row .1.3.6.1.4.1.890.1.5.12.49.3.2.3.1

Show DHCP database on specified ports.

Indexes

Column Syntax OID

dhcpSnoopDbIpType

IP address type, IPv6 or IPv4.

Enumeration

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.49.3.2.3.1.1

dhcpSnoopDbIp

Show the IP address in the DHCP database on specified UNI ports.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.3.2.3.1.2

dhcpSnoopDbVid

Show the vid in the DHCP database on specified UNI ports.

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.3.2.3.1.3

dhcpSnoopDbMac

Show the MAC address in the DHCP database on specified UNI ports.

RFC1213-MIBPhysAddress

.1.3.6.1.4.1.890.1.5.12.49.3.2.3.1.4

dhcpSnoopStatsTable

table

.1.3.6.1.4.1.890.1.5.12.49.3.2.4 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnoopStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dhcpSnoopStatsTable'

A table that contains DHCP stats on specified UNI ports.

dhcpSnoopStatsEntry row .1.3.6.1.4.1.890.1.5.12.49.3.2.4.1

show DHCP stats on specified ports.

Indexes

Column	Syntax	OID
dhcpSnoopStatsOverFlow Show the counter when occurs overflow in DHCPv4 and DHCPv6.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.1`
dhcpSnoopStatsV4Discover Show the number of DHCPv4 Discover packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.2`
dhcpSnoopStatsV4Offer Show the number of DHCPv4 Offer packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.3`
dhcpSnoopStatsV4Request Show the number of DHCPv4 Request packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.4`
dhcpSnoopStatsV4Ack Show the number of DHCPv4 Ack packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.5`
dhcpSnoopStatsV4Release Show the number of DHCPv4 Release packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.6`
dhcpSnoopStatsV6Solicit Show the number of DHCPv6 Solicit packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.7`
dhcpSnoopStatsV6Advertise Show the number of DHCPv6 Advertise packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.8`
dhcpSnoopStatsV6Request Show the number of DHCPv6 Request packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.9`
dhcpSnoopStatsV6Reply Show the number of DHCPv6 Reply packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.10`
dhcpSnoopStatsV6Renew Show the number of DHCPv6 Renew packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.11`
dhcpSnoopStatsV6Rebind Show the number of DHCPv6 Rebind packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.12`
dhcpSnoopStatsV6Release Show the number of DHCPv6 Release packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.13`
dhcpSnoopStatsV6RelayForward Show the number of DHCPv6 Relay Forward packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.14`
dhcpSnoopStatsV6RelayReply Show the number of DHCPv6 Relay Reply packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.15`
dhcpSnoopStatsClear Set 1 to clear all the counter in dhcpSnoopStatsTable.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.3.2.4.1.16`

geConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.4.1 · 1 row entry · 13 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk geConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::geConfTable'

Configures for the specified GE-NNI ports.

geConfEntry row .1.3.6.1.4.1.890.1.5.12.49.4.1.1

Indexes

Column Syntax OID

geConfName

Sets a name for the port(s).

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.1

geConfSpeedDuplex

Configures GE speed and duplex mode
auto(1) - auto negotiation (both Copper and SFP PHY)
halfx10(2) - 10Base-T half duplex mode (Copper)
fullx10(3) - 10Base-T full duplex mode (Copper)
halfx100(4) - 100Base-TX half dupl…

Enumerationr/w

Enumerated Values:

1	auto
2	halfx10
3	fullx10
4	halfx100
5	fullx100
6	fullx1000
7	fiberx1000

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.2

geConfAlarmProf

Sets ENET alarm profile for the port(s).

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.3

geLinkStatus

displays GE speed and duplex mode
inactive(0) - inactive
linkdown(1) - link down
halfx10(2) - 10Base-T half duplex mode (Copper)
fullx10(3) - 10Base-T full duplex mode (Copper)
halfx100(4) - 100Base-TX half duplex mode …

Enumeration

Enumerated Values:

0	inactive
1	linkdown
2	halfx10
3	fullx10
4	halfx100
5	fullx100
6	fullx1000
7	fiberx1000

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.4

geUtilTxCurrentPercent

GE current utilization in 0.01 percentage(100 = 1.00%).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.5

geUtilTxCurrentSpeed

GE current utilization in kbps.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.6

geUtilRxCurrentPercent

GE current utilization in 0.01 percentage(100 = 1.00%).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.7

geUtilRxCurrentSpeed

GE current utilization in kbps.

geUtilTxIssueLvl1Threshold

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.8

GE utilization alarm issue level one threshold for tx direction, the threshold value of level two should be
higher than level one.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.9

geUtilTxIssueLvl2Threshold

GE utilization alarm issue level two threshold for tx direction, the threshold value of level two should be
higher than level one.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.10

geUtilRxIssueLvl1Threshold

GE utilization alarm level one threshold for rx direction, the threshold value of level two should be
higher than level one.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.11

geUtilRxIssueLvl2Threshold

GE utilization alarm level two threshold for rx direction, the threshold value of level two should be
higher than level one.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.12

geUtilSampleSeconds

Sample seconds of GE utilization alarm

Unsigned32r/w

Constraints:
range: 1-300

.1.3.6.1.4.1.890.1.5.12.49.4.1.1.13

geDdmiTable

table

.1.3.6.1.4.1.890.1.5.12.49.4.3 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk geDdmiTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::geDdmiTable'

Displays current DDMI status on GE-NNI port.

geDdmiEntry row .1.3.6.1.4.1.890.1.5.12.49.4.3.1

Indexes

Column	Syntax	OID
geDdmiTemp Internally measured transceiver temperature in 10^(-4) Celsius.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.4.3.1.1`
geDdmiVolt Internally measured transceiver supply voltage in 10^(-4) Volts.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.4.3.1.2`
geDdmiTxCurr Measured TX bias current in 10^(-4) mA.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.4.3.1.3`
geDdmiTxPower Measured TX output power in 10^(-4) mW.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.4.3.1.4`
geDdmiRxPower Measured RX received optical power in 10^(-4) mW.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.4.3.1.5`

geSfpInfoTable

table

.1.3.6.1.4.1.890.1.5.12.49.4.4 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk geSfpInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::geSfpInfoTable'

Displays current SFP information status on GE-NNI port.

geSfpInfoEntry row .1.3.6.1.4.1.890.1.5.12.49.4.4.1

Indexes

slotModuleIdVes1724-58v temperatureConfIndex

Column	Syntax	OID
geSfpInfoVendor SFP vendor name.	OctetString Constraints: `range: 0-31`	`.1.3.6.1.4.1.890.1.5.12.49.4.4.1.1`
geSfpInfoVendorPn SFP vendor PN(Part number).	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.4.4.1.2`
geSfpInfoVendorRev SFP vendor Rev(Revision level for part number).	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.4.4.1.3`
geSfpInfoVendorSn SFP vendor SN(Serial number).	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.4.4.1.4`
geSfpInfoDateCode SFP vendor's manufacturing date code.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.4.4.1.5`

fanConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.5.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fanConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fanConfTable'

Configure the limit value of fan module, currently only control card has fan,
an alarm will be raised if the sensing value higher or lower than these value.

fanConfEntry row .1.3.6.1.4.1.890.1.5.12.49.5.1.1

Indexes

fanConfIndex

Column	Syntax	OID
fanConfIndex FAN module index	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.890.1.5.12.49.5.1.1.1`
fanConfHighThreshold FAN speed high threshold	RPMInteger32r/w Constraints: `range: 0-15000`	`.1.3.6.1.4.1.890.1.5.12.49.5.1.1.2`
fanConfLowThreshold FAN speed low threshold	RPMInteger32r/w Constraints: `range: 0-15000`	`.1.3.6.1.4.1.890.1.5.12.49.5.1.1.3`

temperatureConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.5.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk temperatureConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::temperatureConfTable'

Configure the limit value of temperature module, an alarm will be raised
if the sensing value higher or lower than these value.

temperatureConfEntry row .1.3.6.1.4.1.890.1.5.12.49.5.2.1

Indexes

Column	Syntax	OID
temperatureConfIndex Temperature sensor index	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.890.1.5.12.49.5.2.1.1`
temperatureConfHighThreshold Temperature high threshold	degree CelsiusInteger32r/w Constraints: `range: -50-120`	`.1.3.6.1.4.1.890.1.5.12.49.5.2.1.2`
temperatureConfLowThreshold Temperature low threshold	degree CelsiusInteger32r/w Constraints: `range: -50-120`	`.1.3.6.1.4.1.890.1.5.12.49.5.2.1.3`

voltageConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.5.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voltageConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::voltageConfTable'

Configure the limit value of voltage module, an alarm will be raised
if the sensing value higher or lower than these value.

voltageConfEntry row .1.3.6.1.4.1.890.1.5.12.49.5.3.1

Indexes

slotModuleIdVes1724-58v voltageConfIndex

Column	Syntax	OID
voltageConfIndex Voltage sendor index	Integer32 Constraints: `range: 1-10`	`.1.3.6.1.4.1.890.1.5.12.49.5.3.1.1`
voltageConfHighThreshold Voltage high threshold	mVInteger32r/w Constraints: `range: 0-25000`	`.1.3.6.1.4.1.890.1.5.12.49.5.3.1.2`
voltageConfLowThreshold Voltage low threshold	mVInteger32r/w Constraints: `range: 0-25000`	`.1.3.6.1.4.1.890.1.5.12.49.5.3.1.3`

fanStatsTable

table

.1.3.6.1.4.1.890.1.5.12.49.5.4 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fanStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fanStatsTable'

A table that contains rpm information about the fans.

fanStatsEntry row .1.3.6.1.4.1.890.1.5.12.49.5.4.1

Indexes

fanConfIndex

Column	Syntax	OID
fanRpmCurValue The current rpm of the fan.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.4.1.1`
fanRpmMaxValue The maximum rpm ever performed by the fan.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.4.1.2`
fanRpmMinValue The minimum rpm ever performed by the fan.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.4.1.3`
fanRpmAvgValue The average rpm performed by the fan.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.4.1.4`
fanRpmDescr The description of the fan (e.g. location, function, etc.).	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.5.4.1.5`

temperatureStatsTable

table

.1.3.6.1.4.1.890.1.5.12.49.5.5 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk temperatureStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::temperatureStatsTable'

A table that contains temperature information.

temperatureStatsEntry row .1.3.6.1.4.1.890.1.5.12.49.5.5.1

Indexes

slotModuleIdVes1724-58v temperatureConfIndex

Column	Syntax	OID
temperatureCurValue The current temperature detected by the sensor.	CelsiusSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.5.1.1`
temperatureMaxValue The maximum temperature ever detected by the sensor.	CelsiusSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.5.1.2`
temperatureMinValue The minimum temperature ever detected by the sensor.	CelsiusSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.5.1.3`
temperatureAvgValue The average temperature detected by the sensor.	CelsiusSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.5.1.4`
temperatureDescr The description of the temperature sensor (e.g. location, function, etc.).	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.5.5.1.5`

voltageStatsTable

table

.1.3.6.1.4.1.890.1.5.12.49.5.6 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voltageStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::voltageStatsTable'

A table that contains voltage information about the system.

voltageStatsEntry row .1.3.6.1.4.1.890.1.5.12.49.5.6.1

Indexes

slotModuleIdVes1724-58v voltageConfIndex

Column	Syntax	OID
voltageCurValue The current voltage detected by the sensor.	milli-voltageSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.6.1.1`
voltageMaxValue The maximum voltage ever detected by the sensor.	milli-voltageSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.6.1.2`
voltageMinValue The minimum voltage ever detected by the sensor.	milli-voltageSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.6.1.3`
voltageAvgValue The average voltage detected by the sensor.	milli-voltageSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.6.1.4`
voltageNominalValue The nominal voltage which the power should supply.	milli-voltageSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.5.6.1.5`
voltageDescr The description of the voltage (e.g. location, nominal value, etc.).	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.5.6.1.6`

igmpmldConfPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.9 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldConfPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldConfPortTable'

igmp/mld Conf Port Table.

igmpmldConfPortEntry row .1.3.6.1.4.1.890.1.5.12.49.6.9.1

Indexes

igmpmldConfPortMaxGroupCount

Column Syntax OID

Configures maximum group counts on the specified UNI ports.

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.49.6.9.1.1

igmpmldConfPortPrivilegeEnable

Enables group privilege checking on specified UNI ports.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.6.9.1.2

igmpmldConfPortCacEnable

Enable/Disable CAC bandwidth control.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.6.9.1.3

igmpmldConfPortCacMaxBandwidth

Configures maximum CAC bandwidth on the specified UNI ports.

MbpsInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.890.1.5.12.49.6.9.1.4

igmpmldGroupPrivilegeProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.10.2 · 1 row entry · 12 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldGroupPrivilegeProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldGroupPrivilegeProfileTable'

Multicast group privilege profile table

igmpmldGroupPrivilegeProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.6.10.2.1

Indexes

igmpmldGroupPrivilegeProfileName igmpmldGroupPrivilegeProfileIndex

Column Syntax OID

igmpmldGroupPrivilegeProfileName

Profile name

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.1

igmpmldGroupPrivilegeProfileIndex

Configures a privilege entry of specified group privilege profile.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.2

igmpmldGroupPrivilegeProfileAddressType

The type of address format used for the
igmpmldGroupPrivilegeProfileStartIp object and
igmpmldGroupPrivilegeProfileEndIp object.

Enumerationr/w

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.3

igmpmldGroupPrivilegeProfileStartIp

ipv4: 224.0.0.0 ~ 239.255.255.255,
ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff

igmpmldGroupPrivilegeProfileEndIp

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.4

ipv4: 224.0.0.0 ~ 239.255.255.255,
ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff

igmpmldGroupPrivilegeProfilePrivilege

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.5

forbid: deny groups delivery
permit: allows groups delivery.
preview: allows groups preview.

Enumerationr/w

Enumerated Values:

0	forbid
1	permit
2	preview

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.6

igmpmldGroupPrivilegeProfilePrivilegePreviewLength

length timer of preview privilege

secondsInteger32r/w

Constraints:
range: 10-300

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.7

igmpmldGroupPrivilegeProfilePrivilegePreviewInterval

interval timer of preview privilege

secondsInteger32r/w

Constraints:
range: 10-300

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.8

igmpmldGroupPrivilegeProfilePrivilegePreviewCount

preview count

Integer32r/w

Constraints:
range: 1-10

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.9

igmpmldGroupPrivilegeProfilePrivilegePreviewReset

reset timer of preview privilege

secondsInteger32r/w

Constraints:
range: 30-86400

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.10

igmpmldGroupPrivilegeProfileCacBandwidth

Multicast channel bandwidth for channel specified

MbpsInteger32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.11

igmpmldGroupPrivilegeProfileRowStatus

Row status of the table entry.
To destroy the whole profile directly, use igmpmldGroupPrivilegeProfileIndex 0 to indicate this case.

RFC1213-MIBifIndex igmpmldGroupPrivilegeProfileName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.6.10.2.1.12

igmpmldGroupPrivilegePortTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.10.3 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldGroupPrivilegePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldGroupPrivilegePortTable'

Configures group privilege profile to UNI ports

igmpmldGroupPrivilegePortEntry row .1.3.6.1.4.1.890.1.5.12.49.6.10.3.1

Indexes

Column Syntax OID

igmpmldGroupPrivilegePortEntryRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.6.10.3.1.1

igmpmldMvlanTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.11.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldMvlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldMvlanTable'

igmpmldMvlanEntry row .1.3.6.1.4.1.890.1.5.12.49.6.11.2.1

Indexes

igmpmldMvlanId

Column Syntax OID

igmpmldMvlanId

Specified MVLAN ID.

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.6.11.2.1.1

igmpmldMvlanRowStatus

Row status of the table entry.

RFC1213-MIBifIndex igmpmldMvlanId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.6.11.2.1.2

igmpmldMvlanTr101fw

Configures if enables this mvlan to transparent forward in TR-101 mode.
Ignores this configuration in CTC mode.
disable: MVLAN vid of IGMP/MLD report will be changed to this vid if group
address hit one of entr…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.890.1.5.12.49.6.11.2.1.3

igmpmldMvlanPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.11.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldMvlanPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldMvlanPortTable'

Joins specified UNI ports to MVLAN.

igmpmldMvlanPortEntry row .1.3.6.1.4.1.890.1.5.12.49.6.11.3.1

Indexes

Column Syntax OID

igmpmldMvlanPortEgressType

Specifies the egress tagging type for the specified MVLAN packets.
untag(1): egress untagged
tag(2): egress tagged with the same VLAN as MVLAN ID
replaceByUniVlan(3): egress tagged with VLAN ID specified in igmpmldMvlan…

Enumerationr/w

Enumerated Values:

1	untag
2	tag
3	replaceByUniVlan
4	transparent

.1.3.6.1.4.1.890.1.5.12.49.6.11.3.1.1

igmpmldMvlanPortUniVlan

Specifies the egress VLAN ID if igmpmldMvlanPortEgressType
is configured as replaceByUniVlan(3), but the value is not
concerned in other cases

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.6.11.3.1.2

igmpmldMvlanPortRowStatus

Row status of the table entry.

igmpmldMvlanId igmpmldMvlanMapIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.6.11.3.1.3

igmpmldMvlanMapTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.11.4 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldMvlanMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldMvlanMapTable'

Configures N:1 VLAN mapping by group address for TR-101 mode only.
The MVLAN table is not editable when tr101-fw is specified for the MVLAN.

igmpmldMvlanMapEntry row .1.3.6.1.4.1.890.1.5.12.49.6.11.4.1

Indexes

Column Syntax OID

igmpmldMvlanMapIndex

Configures a mapping entry of mvlan map table.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.890.1.5.12.49.6.11.4.1.1

igmpmldMvlanMapStartIp

ipv4: 224.0.0.0 ~ 239.255.255.255,
ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.6.11.4.1.2

igmpmldMvlanMapEndIp

ipv4: 224.0.0.0 ~ 239.255.255.255,
ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.6.11.4.1.3

igmpmldMvlanMapRowStatus

Row status of the table entry.

igmpmldMvlanGroupId igmpmldMvlanGroupAddressType igmpmldMvlanGroupAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.6.11.4.1.4

igmpmldMvlanGroupTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.12.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldMvlanGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldMvlanGroupTable'

This table includes igmpmld group by mvlan information, for TR-101 mode only.

igmpmldMvlanGroupEntry row .1.3.6.1.4.1.890.1.5.12.49.6.12.3.1

An entry in igmpmldMvlanGroupTable.

Indexes

Column Syntax OID

igmpmldMvlanGroupId

Specified MVLAN ID.

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.1

igmpmldMvlanGroupAddressType

The type of address format used for the
igmpmldGroupAddress object.

Enumeration

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.2

igmpmldMvlanGroupAddress

igmpmld group address

igmpmldMvlanGroupNumberOfMembers

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.3

number Of group members

igmpmldMvlanGroupNumberOfNewJoinedMembers

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.4

number Of new joined members

igmpmldMvlanGroupNumberOfLeftMembers

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.5

number Of left members

RFC1213-MIBifIndex igmpmldMvlanGroupId igmpmldMvlanGroupAddressType igmpmldMvlanGroupAddress

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.12.3.1.6

igmpmldMvlanGroupPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.12.4 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldMvlanGroupPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldMvlanGroupPortTable'

This table includes igmpmld Group port by mvlan information, for TR-101 mode only.

igmpmldMvlanGroupPortEntry row .1.3.6.1.4.1.890.1.5.12.49.6.12.4.1

An entry in igmpmldGroupPortTable.

Indexes

Column Syntax OID

igmpmldMvlanGroupCreateTime

createTime of igmpmld group

igmpmldMvlanGroupPortBandwidth

.1.3.6.1.4.1.890.1.5.12.49.6.12.4.1.1

bandwidth of igmpmld group

MbpsInteger32

Constraints:
range: 0-100

.1.3.6.1.4.1.890.1.5.12.49.6.12.4.1.2

igmpmldMvlanGroupPortPrivilege

privilege of igmpmld group

Enumeration

Enumerated Values:

0	forbid
1	preview
2	permit

.1.3.6.1.4.1.890.1.5.12.49.6.12.4.1.3

igmpmldMvlanGroupPortState

state of igmpmld group

Enumeration

Enumerated Values:

0	null
1	active
2	lastMemberQuery
3	preview
4	previewLastMemberQuery
5	previewForbid

.1.3.6.1.4.1.890.1.5.12.49.6.12.4.1.4

igmpmldStatisticsPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.13.5 · 1 row entry · 41 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldStatisticsPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldStatisticsPortTable'

This table includes IGMP/MLD port statistics information

igmpmldStatisticsPortEntry row .1.3.6.1.4.1.890.1.5.12.49.6.13.5.1

An entry in igmpmldStatisticsPortTable

Indexes

igmpmldStatisticsPortChannelCreateSuccess

Column Syntax OID

The total number of channel group created successfully

igmpmldStatisticsPortChannelCreateFail

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.1

The total number of channel group created fail

igmpmldStatisticsPortChannelRemoveLeave

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.2

The total number of channel group removed due to user leave

igmpmldStatisticsPortChannelRemoveTimeout

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.3

The total number of channel group removed due to time out

igmpmldStatisticsPortQueryRx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.4

The total number of IGMP query messages received.

igmpmldStatisticsPortQueryTx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.5

The total number of IGMP query messages transmitted.

igmpmldStatisticsPortGeneralQueryIgmpv2Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.6

The total number of IGMPv2 general query messages transmitted.

igmpmldStatisticsPortGeneralQueryIgmpv3Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.7

The total number of IGMPv3 general query messages transmitted.

igmpmldStatisticsPortGeneralQueryMldv1Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.8

The total number of MLDv1 general query messages transmitted.

igmpmldStatisticsPortGeneralQueryMldv2Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.9

The total number of MLDv2 general query messages transmitted.

igmpmldStatisticsPortSpecificQueryIgmpv2Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.10

The total number of IGMPv2 specific query messages transmitted.

igmpmldStatisticsPortSpecificQueryIgmpv3Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.11

The total number of IGMPv3 specific query messages transmitted.

igmpmldStatisticsPortSpecificQueryMldv1Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.12

The total number of MLDv1 specific query messages transmitted.

igmpmldStatisticsPortSpecificQueryMldv2Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.14

The total number of MLDv2 specific query messages transmitted.

igmpmldStatisticsPortReportRx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.15

The total number of IGMP/MLD report messages received

igmpmldStatisticsPortReportTx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.16

The total number of IGMP/MLD report messages transmitted

igmpmldStatisticsPortReportJoinIgmpv2Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.17

The total number of IGMPv2 join type report messages received.

igmpmldStatisticsPortReportLeaveIgmpv2Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.18

The total number of IGMPv2 leave type report messages received.

igmpmldStatisticsPortReportDropIgmp

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.19

The total number of IGMP dropped report messages

igmpmldStatisticsPortCompatibleMode

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.20

The old version compatible mode of specific port.
The uplink ports (enet1 & enet2) share the same mode.

Enumeration

Enumerated Values:

0	none
1	igmpOnly
2	mldOnly
3	igmpAndMld

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.21

igmpmldStatisticsPortReportJoinMldv1Rx

The total number of MLDv1 join type report messages received.

igmpmldStatisticsPortReportLeaveMldv1Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.22

The total number of MLDv1 leave type report messages received.

igmpmldStatisticsPortReportDropMld

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.23

The total number of MLD dropped report messages

igmpmldStatisticsPortReportIgmpv3Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.24

The total number of IGMPv3 report messages received.

igmpmldStatisticsPortReportMldv2Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.25

The total number of MLDv2 report messages received.

igmpmldStatisticsPortQueryDropIgmp

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.26

The total number of IGMP dropped query messages

igmpmldStatisticsPortQueryDropMld

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.27

The total number of MLD dropped query messages

igmpmldStatisticsPortGeneralQueryIgmpv2Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.28

The total number of IGMPv2 general query messages received.

igmpmldStatisticsPortGeneralQueryIgmpv3Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.29

The total number of IGMPv3 general query messages received.

igmpmldStatisticsPortGeneralQueryMldv1Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.30

The total number of MLDv1 general query messages received.

igmpmldStatisticsPortGeneralQueryMldv2Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.31

The total number of MLDv2 general query messages received.

igmpmldStatisticsPortSpecificQueryIgmpv2Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.32

The total number of IGMPv2 specific query messages received.

igmpmldStatisticsPortSpecificQueryIgmpv3Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.33

The total number of IGMPv3 specific query messages received.

igmpmldStatisticsPortSpecificQueryMldv1Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.34

The total number of MLDv1 specific query messages received.

igmpmldStatisticsPortSpecificQueryMldv2Rx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.35

The total number of MLDv2 specific query messages received.

igmpmldStatisticsPortReportJoinIgmpv2Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.36

The total number of IGMPv2 join type report messages transmitted.

igmpmldStatisticsPortReportLeaveIgmpv2Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.37

The total number of IGMPv2 leave type report messages transmitted.

igmpmldStatisticsPortReportJoinMldv1Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.38

The total number of MLDv1 join type report messages transmitted.

igmpmldStatisticsPortReportLeaveMldv1Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.39

The total number of MLDv1 leave type report messages transmitted.

igmpmldStatisticsPortReportIgmpv3Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.40

The total number of IGMPv3 report messages transmitted.

igmpmldStatisticsPortReportMldv2Tx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.41

The total number of MLDv2 report messages transmitted.

RFC1213-MIBifIndex igmpmldLogsPortTime igmpmldLogsPortSerialNo

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.13.5.1.42

igmpmldLogsPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.6.14.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpmldLogsPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::igmpmldLogsPortTable'

This table includes IGMP/MLD port statistics information

igmpmldLogsPortEntry row .1.3.6.1.4.1.890.1.5.12.49.6.14.1.1

An entry in igmpmldStatisticsPortTable

Indexes

Column Syntax OID

igmpmldLogsPortTime

The time of a log entry

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.1

igmpmldLogsPortSerialNo

The serial number is used to identify the order of logs in the same seconds

igmpmldLogsPortGroupAddressType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.2

igmpmldLogsPortEvent

The event type of a log entry:
join(0) - event of user join a multicast group
leave(1) - event of user leave a multicast group
drop(2) - event of system drop a multicast goup

Enumeration

Enumerated Values:

0	join
1	leave
2	drop

.1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.3

The type of address format used for the igmpmldLogsPortGroupAddress

Enumeration

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.4

igmpmldLogsPortGroupAddress

The group address of a log entry

ipStaticRouteDest ipStaticRouteMask

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.6.14.1.1.5

ipArpTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.1.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipArpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipArpTable'

Display the arp table.

ipArpEntry row .1.3.6.1.4.1.890.1.5.12.49.7.1.2.1

Indexes

ipAddress

Column	Syntax	OID
ipAddress The IP that is learned in ARP table.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.7.1.2.1.1`
macAddress The correspond mac address of the ipAddress.	RFC1213-MIBPhysAddress	`.1.3.6.1.4.1.890.1.5.12.49.7.1.2.1.2`
ipInterface The interface that the ipAddress is learned.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.1.2.1.3`

ipStaticRouteTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.5.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipStaticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipStaticRouteTable'

Configures a static route.

ipStaticRouteEntry row .1.3.6.1.4.1.890.1.5.12.49.7.5.2.1

Indexes

Column Syntax OID

ipStaticRouteDest

Destination subnet address 0.0.0.0 ~ 223.255.255.255

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.1

ipStaticRouteMask

Destination subnet mask

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.2

ipStaticRouteNextHop

Next hop address 0.0.0.0 ~ 223.255.255.255

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.3

ipStaticRouteRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.4

ipStaticRouteIfName

Destination interface name

ipv6DefaultRouterInbandAddress

.1.3.6.1.4.1.890.1.5.12.49.7.5.2.1.5

ipRouteTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.5.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipRouteTable'

Display routing table.

ipRouteEntry row .1.3.6.1.4.1.890.1.5.12.49.7.5.3.1

Indexes

ipRouteDest ipRouteMask

Column	Syntax	OID
ipRouteDest Destination subnet address 0.0.0.0 ~ 223.255.255.255	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.3.1.1`
ipRouteMask Destination subnet mask	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.3.1.2`
ipRouteNextHop Next hop address 0.0.0.0 ~ 223.255.255.255	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.3.1.3`
ipRouteIfName Destination interface name	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.3.1.4`

ipv6DefaultRouterInbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.5.4 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6DefaultRouterInbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6DefaultRouterInbandTable'

Show IPv6 inband default-router.

ipv6DefaultRouterInbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.5.4.1

Indexes

Column	Syntax	OID
ipv6DefaultRouterInbandAddress Show IPv6 default-router inband Address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.1`
ipv6DefaultRouterInbandPreference Show IPv6 default-router inband Preference	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.2`
ipv6DefaultRouterInbandLifetime Show IPv6 default-router inband lifetime (Unit: sec)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.3`
ipv6DefaultRouterInbandExpire Show IPv6 default-router inband expire	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.4`
ipv6DefaultRouterInbandFlag Show IPv6 default-router inband flag	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.4.1.5`

ipv6DefaultRouterOutbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.5.5 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6DefaultRouterOutbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6DefaultRouterOutbandTable'

Show IPv6 outband default-router.

ipv6DefaultRouterOutbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.5.5.1

Indexes

ipv6DefaultRouterOutbandAddress

Column	Syntax	OID
ipv6DefaultRouterOutbandAddress Show IPv6 default-router outband Address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.1`
ipv6DefaultRouterOutbandPreference Show IPv6 default-router outband Preference	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.2`
ipv6DefaultRouterOutbandLifetime Show IPv6 default-router outband lifetime. (Unit: sec)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.3`
ipv6DefaultRouterOutbandExpire Show IPv6 default-router outband expire	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.4`
ipv6DefaultRouterOutbandFlag Show IPv6 default-router outband flag	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.5.1.5`

ipv6RouteInbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.5.6 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6RouteInbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6RouteInbandTable'

Show IPv6 inband route

ipv6RouteInbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.5.6.1

Indexes

ipv6RouteInbandAddress ipv6RouteInbandMask

Column	Syntax	OID
ipv6RouteInbandAddress Show IPv6 inband route Address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.6.1.1`
ipv6RouteInbandMask Show IPv6 inband route address mask.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.6.1.2`
ipv6RouteInbandName Show IPv6 inband route Gateway/Interface Name	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.6.1.3`

ipv6RouteOutbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.5.7 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6RouteOutbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6RouteOutbandTable'

Show IPv6 outband route

ipv6RouteOutbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.5.7.1

Indexes

ipv6RouteOutbandAddress

Column	Syntax	OID
ipv6RouteOutbandAddress Show IPv6 outband route Address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.7.1.1`
ipv6RouteOutbandMask Show IPv6 inband route address mask.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.7.5.7.1.2`
ipv6RouteOutbandName Show IPv6 Outband route Gateway/Interface Name	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.5.7.1.3`

ipv6DestInbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.7.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6DestInbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6DestInbandTable'

Show IPv6 inband destination

ipv6DestInbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.7.1.1

Indexes

ipv6DestInbandDestAddress

Column	Syntax	OID
ipv6DestInbandDestAddress Show IPv6 inband destination Address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.7.1.1.1`
ipv6DestInbandNextHopAddress Show IPv6 inband destination next hop address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.7.1.1.2`

ipv6DestOutbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.7.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6DestOutbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6DestOutbandTable'

Show IPv6 outband destination

ipv6DestOutbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.7.2.1

Indexes

ipv6DestOutbandDestAddress

Column	Syntax	OID
ipv6DestOutbandDestAddress Show IPv6 outband destination Address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.7.2.1.1`
ipv6DestOutbandNextHopAddress Show IPv6 outband destination next hop address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.7.2.1.2`

ipv6NeighborInbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.8.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6NeighborInbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6NeighborInbandTable'

Show IPv6 inband neighbor

ipv6NeighborInbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.8.1.1

Indexes

ipv6NeighborInbandNeighbor

Column	Syntax	OID
ipv6NeighborInbandNeighbor Show IPv6 inband neighbor address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.8.1.1.1`
ipv6NeighborInbandLinklayerAddress Show IPv6 inband neighbor linklayer address. 00:00:00:00:00:00 means incomplete	OctetString Constraints: `range: 6-6`	`.1.3.6.1.4.1.890.1.5.12.49.7.8.1.1.2`
ipv6NeighborInbandExpire Show IPv6 inband neighbor expire.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.8.1.1.3`
ipv6NeighborInbandFlags Show IPv6 inband neighbor flag.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.8.1.1.4`

ipv6NeighborOutbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.8.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6NeighborOutbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6NeighborOutbandTable'

Show IPv6 outband neighbor

ipv6NeighborOutbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.8.2.1

Indexes

ipv6NeighborOutbandNeighbor

Column	Syntax	OID
ipv6NeighborOutbandNeighbor Show IPv6 outband neighbor address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.890.1.5.12.49.7.8.2.1.1`
ipv6NeighborOutbandLinklayerAddress Show IPv6 outband neighbor linklayer address. 00:00:00:00:00:00 means incomplete	OctetString Constraints: `range: 6-6`	`.1.3.6.1.4.1.890.1.5.12.49.7.8.2.1.2`
ipv6NeighborOutbandExpire Show IPv6 outband neighbor expire.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.8.2.1.3`
ipv6NeighborOutbandFlags Show IPv6 outband neighbor flag.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.7.8.2.1.4`

ipv6PrefixInbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.9.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6PrefixInbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6PrefixInbandTable'

Show IPv6 inband prefix

ipv6PrefixInbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.9.1.1

Indexes

ipv6PrefixInbandPrefix ipv6PrefixInbandPrefixLength

Column Syntax OID

ipv6PrefixInbandPrefix

Show IPv6 inband prefix address.

ipv6PrefixInbandPrefixLength

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.1

Show IPv6 inband prefix length.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.2

ipv6PrefixInbandVLtime

Show IPv6 inband prefix vltime.

.1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.3

ipv6PrefixInbandPLtime

Show IPv6 inband prefix pltime.

.1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.4

ipv6PrefixInbandExpire

Show IPv6 inband prefix expire.

ipv6PrefixInbandAutonomous

.1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.5

ipv6PrefixInbandOnlink

Show IPv6 inband prefix onlink.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.6

Show IPv6 inband prefix autonomous.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.890.1.5.12.49.7.9.1.1.7

ipv6PrefixOutbandTable

table

.1.3.6.1.4.1.890.1.5.12.49.7.9.2 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipv6PrefixOutbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::ipv6PrefixOutbandTable'

Show IPv6 outband prefix

ipv6PrefixOutbandEntry row .1.3.6.1.4.1.890.1.5.12.49.7.9.2.1

Indexes

ipv6PrefixOutbandPrefix ipv6PrefixOutbandPrefixLength

Column Syntax OID

ipv6PrefixOutbandPrefix

Show IPv6 outband prefix address.

ipv6PrefixOutbandPrefixLength

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.1

Show IPv6 outband prefix length.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.2

ipv6PrefixOutbandVLtime

Show IPv6 outband prefix vltime.

.1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.3

ipv6PrefixOutbandPLtime

Show IPv6 outband prefix pltime.

.1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.4

ipv6PrefixOutbandExpire

Show IPv6 outband prefix expire.

ipv6PrefixOutbandAutonomous

.1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.5

ipv6PrefixOutbandOnlink

Show IPv6 outband prefix expire.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.6

Show IPv6 outband prefix autonomous.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.890.1.5.12.49.7.9.2.1.7

slotModuleTable

table

.1.3.6.1.4.1.890.1.5.12.49.8.1 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk slotModuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::slotModuleTable'

The table which contains the slot information in a chassis.

slotModuleEntry row .1.3.6.1.4.1.890.1.5.12.49.8.1.1

Indexes

slotModuleIdVes1724-58v

Column Syntax OID

slotModuleIdVes1724-58v

Identity of the slot.
2 ~ 5: slot 2 ~ slot 5
1: control card

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.1

slotModuleRealType

Card type of the plug-in card.

Enumeration

Enumerated Values:

0	empty
1	msc
2	alc
3	vlc
4	vop
8	unknown

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.2

slotModuleDescr

The descriptions of the plug-in card.

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.4

slotModuleStatus

The module state of the plug-in card.

Enumeration

Enumerated Values:

0	empty
1	init
2	provisioning
3	active
4	failure
5	disabled
6	unknown

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.5

slotModuleAlarmStatus

This variable indicates the alarm status of the module and would be aligned with MSC/line-card alarm LED.
hasAlarm(1) there is at least one critical current alarm realted to the module
noAlarm(2) there are no critical c…

Enumeration

Enumerated Values:

1	hasAlarm
2	noAlarm

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.6

slotModuleHWVersion

The hardware version of the plug-in card

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.7

slotModuleSerialNumber

The serial number of the plug-in card

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.8

slotModuleCleiCode

The CLEI code of the plug-in card

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.9

slotModuleUpTime

The time (in seconds) since the plug-in card was last re-initialized.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.8.1.1.10

loginUserTable

table

.1.3.6.1.4.1.890.1.5.12.49.9.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loginUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::loginUserTable'

Login account configuration table.

loginUserEntry row .1.3.6.1.4.1.890.1.5.12.49.9.2.1

Indexes

loginUserName

Column Syntax OID

loginUserName

Name of user account.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.9.2.1.1

loginUserPassword

Password of user account.
Can input with plain text or ciphertext.
plain text: Up to 31 printable characters.
ciphertext: 95 characters with special format and generated by device from plain text.

OctetStringr/w

Constraints:
range: 1-95

.1.3.6.1.4.1.890.1.5.12.49.9.2.1.2

loginUserPrivilege

Assigns a privilege level to the specified account. The privilege level is applied the next time the user logs in.

Integer32r/w

Constraints:
range: 0-14

.1.3.6.1.4.1.890.1.5.12.49.9.2.1.3

loginUserRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.9.2.1.4

loopguardConfPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.10.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopguardConfPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::loopguardConfPortTable'

Loop guard configuration table

loopguardConfPortEntry row .1.3.6.1.4.1.890.1.5.12.49.10.1.1

Indexes

loopguardConfPortRecoverTime

Column Syntax OID

loopguardConfPortEnable

Enable/Disable loop guard function for specific port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.10.1.1.1

loopguardConfPortPolicy

Configures the policy when loop condition is detected.

fix : shutdown the port, user needs to enable the port manually
dynamic : shutdown the port, and recovered after recover time

Enumerationr/w

Enumerated Values:

1	fix
2	dynamic

.1.3.6.1.4.1.890.1.5.12.49.10.1.1.2

Configures the recover time for dynamic policy.

secondsInteger32r/w

Constraints:
range: 60-600

.1.3.6.1.4.1.890.1.5.12.49.10.1.1.3

loopguardConfPortUniVlan

1~4093 : Configures the UNI VLAN that the loopguard detection packets carried.
0 : Sets loopguard detection packets carry no VLAN tag.
If set loopguardConfPortUniVlan with 0 only, the loopguardConfPortPbit will be a…

Unsigned32r/w

Constraints:
range: 0-4093

.1.3.6.1.4.1.890.1.5.12.49.10.1.1.4

loopguardConfPortPbit

Configures pbit that the loopguard detection packets carried.
If set loopguardConfPortUniVlan with 0 only, the loopguardConfPortPbit will be automatically set to default value 6.
If set (loopguardConfPortUniVlan, loopgu…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.10.1.1.5

loopguardStatsPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.10.3 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopguardStatsPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::loopguardStatsPortTable'

Loop guard UNI port statistics table

loopguardStatsPortEntry row .1.3.6.1.4.1.890.1.5.12.49.10.3.1

Indexes

loopguardStatsPortLinkedState

Column Syntax OID

Displays linked state on specific UNI port.

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.890.1.5.12.49.10.3.1.1

loopguardStatsPortTxPkts

Displays counter of transmited loopguard probe packet on specific UNI port.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.10.3.1.2

loopguardStatsPortRxPkts

Displays counter of received loopguard probe packet on specific UNI port.

loopguardStatsPortBadPkts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.10.3.1.3

Displays counter of received bad loopguard probe packet on specific UNI port.
The bad loopguard probe packet will not trigger loopguard block port mechanism.
loopguardStatsPortRxPkts minus loopguardStatsPortBadPkts repr…

loopguardStatsPortShutdownTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.10.3.1.4

Displays port shutdown time for loopguard detection on specific UNI port.

loopguardStatsPortOperation

.1.3.6.1.4.1.890.1.5.12.49.10.3.1.5

1 : Clears loopguard statistics (packet counter) on specific UNI port.

Enumerationr/w

Enumerated Values:

1	clearLoopguardStatistics

.1.3.6.1.4.1.890.1.5.12.49.10.3.1.6

atmvcTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.1.2 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk atmvcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::atmvcTable'

ATM VC configuration table

atmvcEntry row .1.3.6.1.4.1.890.1.5.12.49.11.1.2.1

Indexes

Column Syntax OID

atmvcVpi

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.1

atmvcVci

Integer32

Constraints:
range: 32-65535

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.2

atmvcPriority

The QoS priority of the ATM VC. The QoS priority must be unique
in the VCs in the same UNI port.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.3

atmvcEncap

llc: LLC encapsulation
vc: VC-MUX encapsulation

Enumerationr/w

Enumerated Values:

1	llc
2	vc

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.4

atmvcRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.7

atmvcMvlan

this pvc join mvlan or not.

Enumerationr/w

Enumerated Values:

1	join
2	nojoin

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.8

atmvcPvid

Join the VC into VLAN TRUNK untagged mode or not.
NNI S-tag VLAN ID.
If atmvcVlanTrunk is nojoin(2), return 1.

Integer32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.9

atmvcPbit

Join the VC into VLAN TRUNK untagged mode or not.
NNI S-tag pbit.
If atmvcVlanTrunk is nojoin(2), return 0.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.10

atmvcVlanTrunk

Join the VC into VLAN TRUNK untagged mode or not.

Enumerationr/w

Enumerated Values:

1	join
2	nojoin

.1.3.6.1.4.1.890.1.5.12.49.11.1.2.1.11

atmOamF5Table

table

.1.3.6.1.4.1.890.1.5.12.49.11.1.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk atmOamF5Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::atmOamF5Table'

ATM Oam F5 test configuration table

atmOamF5Entry row .1.3.6.1.4.1.890.1.5.12.49.11.1.3.1

Indexes

portIsolationVlanRowStatus

Column Syntax OID

atmOamF5Test

Write test(2) to start OAM F5 test.
the value will be test(2) is the test is still on going.
the value will be done(1) after test is done.

Enumerationr/w

Enumerated Values:

1	done
2	test

.1.3.6.1.4.1.890.1.5.12.49.11.1.3.1.1

atmOamF5TestResult

OAM F5 test result

Enumeration

Enumerated Values:

1	none
2	ongoing
3	successful
4	failed

.1.3.6.1.4.1.890.1.5.12.49.11.1.3.1.2

portIsolationVlanTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.2.2 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portIsolationVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::portIsolationVlanTable'

Configures port isolation vlan.

portIsolationVlanEntry row .1.3.6.1.4.1.890.1.5.12.49.11.2.2.1

Indexes

portIsolationVlanVid

Column Syntax OID

portIsolationVlanVid

Isolated VLAN ID.

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.2.2.1.1

Row status of the table entry.

RFC1213-MIBifIndex vlanUplinkVlanId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.2.2.1.2

vlanUplinkTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.4.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanUplinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanUplinkTable'

Joins/leaves specified NNI ports to a VLAN.
If an GE uplink port joined all VLAN via vlanUplinkJoinAllTable,
join to individual VLAN is not allowed

vlanUplinkEntry row .1.3.6.1.4.1.890.1.5.12.49.11.4.1.1

Indexes

Column Syntax OID

vlanUplinkVlanId

VLAN ID

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.4.1.1.1

vlanUplinkRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.4.1.1.2

vlanUplinkJoinAllTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.4.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanUplinkJoinAllTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanUplinkJoinAllTable'

Joins/leaves specified NNI ports to all VLAN.
If an GE uplink port joined any VLAN via vlanUplinkTable,
enable Join All VLAN is not allowed

vlanUplinkJoinAllEntry row .1.3.6.1.4.1.890.1.5.12.49.11.4.2.1

Indexes

RFC1213-MIBifIndex vlanUplinkUntagVlanId

Column Syntax OID

vlanUplinkJoinAllEnable

Join all VLAN.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.11.4.2.1.2

vlanUplinkUntagTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.4.4 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanUplinkUntagTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanUplinkUntagTable'

Configures untag VLAN on specified NNI ports.

vlanUplinkUntagEntry row .1.3.6.1.4.1.890.1.5.12.49.11.4.4.1

Indexes

Column Syntax OID

vlanUplinkUntagVlanId

Configures the joined vlan that is untag in egress direction and port pvid in ingress for certain enet port.
If a NNI port had joined all VLAN, vlan uplink untag takes higher priority.

Integer32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.4.4.1.1

vlanUplinkUntagVlanPbit

Pbit for untag VLAN.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.4.4.1.2

vlanUplinkUntagRowStatus

Row status of the table entry. When dot3ad is enabled, vlan-untag setting will be synchronized between GE 1 and GE 2.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.4.4.1.3

vlanTransparentPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.5.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTransparentPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTransparentPortTable'

Enable/disable VLAN transparent on the specified UNI PTM ports.

vlanTransparentPortEntry row .1.3.6.1.4.1.890.1.5.12.49.11.5.1.1

Indexes

vlanTransparentPortRowStatus

Column Syntax OID

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.5.1.1.1

vlanTransparentVcTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.5.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTransparentVcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTransparentVcTable'

Enable/disable VLAN transparent on the specified UNI ATM virtual circuit.

vlanTransparentVcEntry row .1.3.6.1.4.1.890.1.5.12.49.11.5.2.1

Indexes

vlanTransparentVcRowStatus

Column Syntax OID

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.5.2.1.1

vlanTrunkUntagPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.6.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkUntagPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTrunkUntagPortTable'

Cross-connects untagged packet in the specified UNI PTM ports
to the specified S VLAN or S + C VLAN on NNI ports.

vlanTrunkUntagPortEntry row .1.3.6.1.4.1.890.1.5.12.49.11.6.1.1

Indexes

vlanTrunkUntagPortNniSvlan

Column Syntax OID

vlanTrunkUntagPortMode

Configures NNI VLAN tagging mode.
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag

Enumerationr/w

Enumerated Values:

1	sVlan
2	sPlusCxVlan

.1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.1

NNI S-tag VLAN ID

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.2

vlanTrunkUntagPortNniSpbit

NNI S-tag pbit

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.3

vlanTrunkUntagPortNniCvlan

NNI C-tag VLAN ID.
if vlanTrunkUntagPortMode is sVlan(1),
the value will be ignored and always return 0.

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.4

vlanTrunkUntagPortNniCpbit

NNI C-tag pbit.
if vlanTrunkUntagPortMode is sVlan(1),
the value will be ignored and always return 0.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.5

vlanTrunkUntagPortRowStatus

Row status of the table entry.

RFC1213-MIBifIndex vlanTrunkUntagEtypePortEtype

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.6.1.1.6

vlanTrunkUntagEtypePortTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.6.2 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkUntagEtypePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTrunkUntagEtypePortTable'

Cross-connects untagged packet from the specified UNI PTM ports
to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type
field in the packet.

vlanTrunkUntagEtypePortEntry row .1.3.6.1.4.1.890.1.5.12.49.11.6.2.1

Indexes

Column Syntax OID

vlanTrunkUntagEtypePortEtype

Ether type

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.1

vlanTrunkUntagEtypePortMode

Configures NNI VLAN tagging mode.
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag

Enumerationr/w

Enumerated Values:

1	sVlan
2	sPlusCxVlan

.1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.2

vlanTrunkUntagEtypePortNniSvlan

NNI S-tag VLAN ID

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.3

vlanTrunkUntagEtypePortNniSpbit

NNI S-tag pbit

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.4

vlanTrunkUntagEtypePortNniCvlan

NNI C-tag VLAN ID.
if vlanTrunkUntagEtypePortMode is sVlan(1),
the value will be ignored and always return 0.

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.5

vlanTrunkUntagEtypePortNniCpbit

NNI C-tag pbit.
if vlanTrunkUntagEtypePortMode is sVlan(1),
the value will be ignored and always return 0.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.6

vlanTrunkUntagEtypePortRowStatus

Row status of the table entry.

RFC1213-MIBifIndex vlanTrunkTagPortUniNniVlan

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.6.2.1.7

vlanTrunkTagPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.6.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkTagPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTrunkTagPortTable'

Cross-connects uni-vid tagged packet in the specified UNI PTM ports to the
S(uni-vid) VLAN if S VLAN is not specified or S(svid) + C(uni-vid) on NNI
ports if S VLAN is specified.

vlanTrunkTagPortEntry row .1.3.6.1.4.1.890.1.5.12.49.11.6.3.1

Indexes

Column Syntax OID

vlanTrunkTagPortUniNniVlan

UNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID
depends on which NNI VLAN tagging mode is configured.

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.3.1.1

vlanTrunkTagPortMode

Configures NNI VLAN tagging mode.
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag

Enumerationr/w

Enumerated Values:

1	sVlan
2	sPlusCxVlan

.1.3.6.1.4.1.890.1.5.12.49.11.6.3.1.2

vlanTrunkTagPortNniSvlan

NNI S VLAN ID. This field is used when vlanTrunkTagPortMode
is configured as sPlusCxVlan(2).

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.3.1.3

vlanTrunkTagPortRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.6.3.1.4

vlanTrunkUntagVcTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.6.4 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkUntagVcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTrunkUntagVcTable'

Cross-connects untagged packet in the specified UNI ATM virtual circuits to
the specified S VLAN or S + C VLAN on NNI ports.

vlanTrunkUntagVcEntry row .1.3.6.1.4.1.890.1.5.12.49.11.6.4.1

Indexes

vlanTrunkUntagVcRowStatus

Column Syntax OID

vlanTrunkUntagVcMode

Configures NNI VLAN tagging mode.
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag

Enumerationr/w

Enumerated Values:

1	sVlan
2	sPlusCxVlan

.1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.1

vlanTrunkUntagVcNniSvlan

NNI S-tag VLAN ID

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.2

vlanTrunkUntagVcNniSpbit

NNI S-tag pbit

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.3

vlanTrunkUntagVcNniCvlan

NNI C-tag VLAN ID.
if vlanTrunkUntagVcMode is sVlan(1),
the value will be ignored and always return 0.

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.4

vlanTrunkUntagVcNniCpbit

NNI C-tag pbit.
if vlanTrunkUntagVcMode is sVlan(1),
the value will be ignored and always return 0.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.5

Row status of the table entry.

RFC1213-MIBifIndex atmvcVpi atmvcVci vlanTrunkUntagEtypeVcEtype

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.6.4.1.6

vlanTrunkUntagEtypeVcTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.6.5 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkUntagEtypeVcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTrunkUntagEtypeVcTable'

Cross-connects untagged packet from the specified UNI ATM virtual circuits
to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in
the packet.

vlanTrunkUntagEtypeVcEntry row .1.3.6.1.4.1.890.1.5.12.49.11.6.5.1

Indexes

Column Syntax OID

vlanTrunkUntagEtypeVcEtype

Ether type

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.1

vlanTrunkUntagEtypeVcMode

Configures NNI VLAN tagging mode.
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag

Enumerationr/w

Enumerated Values:

1	sVlan
2	sPlusCxVlan

.1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.2

vlanTrunkUntagEtypeVcNniSvlan

NNI S-tag VLAN ID

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.3

vlanTrunkUntagEtypeVcNniSpbit

NNI S-tag pbit

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.4

vlanTrunkUntagEtypeVcNniCvlan

NNI C-tag VLAN ID.
if vlanTrunkUntagEtypeVcMode is sVlan(1),
the value will be ignored and always return 0.

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.5

vlanTrunkUntagEtypeVcNniCpbit

NNI C-tag pbit.
if vlanTrunkUntagEtypeVcMode is sVlan(1),
the value will be ignored and always return 0.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.6

vlanTrunkUntagEtypeVcRowStatus

Row status of the table entry.

RFC1213-MIBifIndex atmvcVpi atmvcVci vlanTrunkTagVcUniNniVlan

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.6.5.1.7

vlanTrunkTagVcTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.6.6 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkTagVcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTrunkTagVcTable'

Cross-connects uni-vid tagged packet in the specified UNI ATM virtual
circuits to the S(uni-vid) VLAN if svlan is not specified or S(svid) +
C(uni-vid) on NNI ports if svlan is specified.

vlanTrunkTagVcEntry row .1.3.6.1.4.1.890.1.5.12.49.11.6.6.1

Indexes

Column Syntax OID

vlanTrunkTagVcUniNniVlan

UNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID
depends on which NNI VLAN tagging mode is configured.

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.6.1.1

vlanTrunkTagVcMode

Configures NNI VLAN tagging mode.
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag

Enumerationr/w

Enumerated Values:

1	sVlan
2	sPlusCxVlan

.1.3.6.1.4.1.890.1.5.12.49.11.6.6.1.2

vlanTrunkTagVcNniSvlan

NNI S VLAN ID. This field is used when vlanTrunkTagPortMode
is configured as sPlusCxVlan(2).

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.6.6.1.3

vlanTrunkTagVcRowStatus

Row status of the table entry.

RFC1213-MIBifIndex vlanTranslationPortUniVlan

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.6.6.1.4

vlanTranslationPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.7.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTranslationPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTranslationPortTable'

Cross-connects uni-vid tagged packet in the specified UNI PTM ports to the
S(svid) VLAN or S(svid) + C(cvid) on NNI ports.

vlanTranslationPortEntry row .1.3.6.1.4.1.890.1.5.12.49.11.7.1.1

Indexes

Column Syntax OID

vlanTranslationPortUniVlan

UNI VLAN ID

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.1

vlanTranslationPortMode

Configures NNI VLAN tagging mode.
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag

Enumerationr/w

Enumerated Values:

1	sVlan
2	sPlusCxVlan

.1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.2

vlanTranslationPortNniSvlan

NNI S VLAN ID

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.3

vlanTranslationPortNniCvlan

NNI C VLAN ID.
if vlanTranslationPortMode is sVlan(1),
the value will be ignored and always return 0.

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.4

vlanTranslationPortRowStatus

Row status of the table entry.

RFC1213-MIBifIndex atmvcVpi atmvcVci vlanTranslationVcUniVlan

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.7.1.1.5

vlanTranslationVcTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.7.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTranslationVcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTranslationVcTable'

Cross-connects uni-vid tagged packet in the specified UNI ATM virtual
circuits to the  S(svid) VLAN or S(svid) + C(cvid) on NNI ports.

vlanTranslationVcEntry row .1.3.6.1.4.1.890.1.5.12.49.11.7.2.1

Indexes

Column Syntax OID

vlanTranslationVcUniVlan

UNI VLAN ID

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.1

vlanTranslationVcMode

Configures NNI VLAN tagging mode.
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag

Enumerationr/w

Enumerated Values:

1	sVlan
2	sPlusCxVlan

.1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.2

vlanTranslationVcNniSvlan

NNI S VLAN ID

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.3

vlanTranslationVcNniCvlan

NNI S VLAN ID.
if vlanTranslationVcMode is sVlan(1),
the value will be ignored and always return 0.

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.4

vlanTranslationVcRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.7.2.1.5

vlanTlsPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.8.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTlsPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTlsPortTable'

Enables Transparent LAN service on the specified UNI PTM ports. The
packets are tagged with S tag on NNI ports.

vlanTlsPortEntry row .1.3.6.1.4.1.890.1.5.12.49.11.8.1.1

Indexes

Column Syntax OID

vlanTlsPortNniSvlan

NNI S VLAN ID

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.8.1.1.1

vlanTlsPortNniSpbit

NNI S PBIT. Used when vlanTlsPortNniForceSpbit is set to enable(1)

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.8.1.1.2

vlanTlsPortNniForceSpbit

Force SPBIT per vlanTlsPortNniSpbit

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.11.8.1.1.3

vlanTlsPortRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.8.1.1.4

vlanTlsVcTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.8.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTlsVcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vlanTlsVcTable'

Enables Transparent LAN service on the specified UNI ATM virtual circuits.
The packets is tagged with S tag on NNI ports.

vlanTlsVcEntry row .1.3.6.1.4.1.890.1.5.12.49.11.8.2.1

Indexes

Column Syntax OID

vlanTlsVcNniSvlan

NNI S VLAN ID

Unsigned32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.8.2.1.1

vlanTlsVcNniSpbit

NNI S PBIT. Used when vlanTlsVcNniForceSpbit is set to enable(1)

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.11.8.2.1.2

vlanTlsVcNniForceSpbit

Force SPBIT per vlanTlsVcNniSpbit

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.11.8.2.1.3

vlanTlsVcRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.8.2.1.4

fdbPortConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.9.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fdbPortConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fdbPortConfTable'

fdbPortConfEntry row .1.3.6.1.4.1.890.1.5.12.49.11.9.3.1

Indexes

fdbPortConfMaxNumOfMacEntries

Column Syntax OID

Configures FDB maximum MAC entry counts for speicifed UNI ports

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.49.11.9.3.1.1

fdbPortConfMacMode

Configures FDB MAC learning mode

dynamicAndStaticMac(1) - allow both static and dynamic MAC
staticMacOnly(2) - allow static MAC only

Enumerationr/w

Enumerated Values:

1	dynamicAndStaticMac
2	staticMacOnly

.1.3.6.1.4.1.890.1.5.12.49.11.9.3.1.2

fdbPortUniVlanConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.9.5 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fdbPortUniVlanConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fdbPortUniVlanConfTable'

fdbPortUniVlanConfEntry row .1.3.6.1.4.1.890.1.5.12.49.11.9.5.1

Indexes

RFC1213-MIBifIndex fdbPortVlanConfUniVlan

Column Syntax OID

fdbPortVlanConfUniVlan

speicifed UNI VLAN

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.11.9.5.1.1

fdbPortVlanConfMaxNumOfMacEntries

Configures FDB maximum MAC entry counts for speicifed UNI ports and UNI VLAN

Integer32r/w

Constraints:
range: 1-32

.1.3.6.1.4.1.890.1.5.12.49.11.9.5.1.2

fdbPortVlanConfRowStatus

Row status of the table entry.

RFC1213-MIBifIndex fdbStaticMacMode fdbStaticMacPhysAddress fdbStaticMacVlanId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.9.5.1.3

fdbStaticMacTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.9.6 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fdbStaticMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fdbStaticMacTable'

Configures static MAC entry on specified UNI ports.

fdbStaticMacEntry row .1.3.6.1.4.1.890.1.5.12.49.11.9.6.1

Indexes

Column Syntax OID

fdbStaticMacMode

svl(1) - shared VLAN mode. fdbStaticMacVlanId should be 0.
ivl(2) - individual VLAN mode. fdbStaticMacVlanId specifies the
VLAN ID 1 ~ 4093.

Enumeration

Enumerated Values:

1	svl
2	ivl

.1.3.6.1.4.1.890.1.5.12.49.11.9.6.1.1

fdbStaticMacVlanId

if fdbStaticMacMode is svl(1), the value shall be 0
if fdbStaticMacMode is ivl(2),
1 ~ 4093, determined by VLAN model
VLAN model | <vlan>
----------------------------------
Trunk uni-vlan | uni-vid
Trunk…

Unsigned32

Constraints:
range: 0-4093

.1.3.6.1.4.1.890.1.5.12.49.11.9.6.1.2

fdbStaticMacPhysAddress

MAC address

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.890.1.5.12.49.11.9.6.1.3

fdbStaticMacRowStatus

Row status of the table entry.

fdbMacLearningVlanMode fdbMacLearningVlanNniSVlan fdbMacLearningVlanNniCVlan fdbMacLearningVlanPhysAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.9.6.1.4

fdbMacLearningVlanTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.9.7 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fdbMacLearningVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fdbMacLearningVlanTable'

MAC learning entry sorted by VLAN ID.

fdbMacLearningVlanEntry row .1.3.6.1.4.1.890.1.5.12.49.11.9.7.1

Indexes

Column Syntax OID

fdbMacLearningVlanMode

VLAN Mode
sVlan(1) - S tag only
sPlusCxVlan(2) - S plus C tag
untag(3) - untag

Enumeration

Enumerated Values:

1	sVlan
2	sPlusCxVlan
3	untag

.1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.1

fdbMacLearningVlanNniSVlan

NNI S VLAN ID 0 ~ 4093.

Unsigned32

Constraints:
range: 0-4093

.1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.2

fdbMacLearningVlanNniCVlan

NNI C VLAN ID 1 ~ 4093.
if fdbMacLearningVlanMode is sVlan(1), this OID is don't care,
and the returned value is always 0

Unsigned32

Constraints:
range: 0-4093

.1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.3

fdbMacLearningVlanPhysAddress

MAC address

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.4

fdbMacLearningVlanUniVlan

UNI VLAN ID 0 ~ 4093, 0 stands for no VLAN tag.
This field for the MAC learned by Uplink port (whose ifIndex belongs to Uplink port) is meaningless and please ignore it.

Unsigned32

Constraints:
range: 0-4093

.1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.5

fdbMacLearningVlanPort

ifIndex the MAC is learnt on

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.6

fdbMacLearningVlanType

MAC learning type

Enumeration

Enumerated Values:

1	dynamic
2	staic

.1.3.6.1.4.1.890.1.5.12.49.11.9.7.1.7

mirrorPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.11.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mirrorPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::mirrorPortTable'

mirrorPortEntry row .1.3.6.1.4.1.890.1.5.12.49.11.11.1.1

An entry in mirrorPortTable.

Indexes

Column Syntax OID

mirrorPortDestPort

Setting destination port of the mirroring.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.1

mirrorPortDestPortVpi

Setting destination vpi if the destination channel is an ATM-VC, leave this field as zero if
the destination channel is other type.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.2

mirrorPortDestPortVci

Setting destination vci if the destination channel is an ATM-VC, leave this field as zero if
the destination channel is other type.

Integer32r/w

Constraints:
range: 32-65535

.1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.3

mirrorPortDirection

Set to 'ingress' to mirror ingress traffic,
'egress' to mirror egress traffic,
'both' to mirror bi-directional traffic

Enumerationr/w

Enumerated Values:

0	ingress
1	egress
2	both

.1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.4

mirrorPortRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.11.1.1.5

mirrorVcTable

table

.1.3.6.1.4.1.890.1.5.12.49.11.11.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mirrorVcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::mirrorVcTable'

mirrorVcEntry row .1.3.6.1.4.1.890.1.5.12.49.11.11.2.1

An entry in mirrorVcTable.

Indexes

Column Syntax OID

mirrorVcDestPort

Setting destination port of the mirroring.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.1

mirrorVcDestPortVpi

Setting destination vpi if the destination channel is an ATM-VC, leave this field as zero if
the destination channel is other type.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.2

mirrorVcDestPortVci

Setting destination vci if the destination channel is an ATM-VC, leave this field as zero if
the destination channel is other type.

Integer32r/w

Constraints:
range: 32-65535

.1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.3

mirrorVcDirection

Set to 'none' to disable mirroring in this port
'ingress' to mirror ingress traffic,
'egress' to mirror egress traffic,
'both' to mirror bi-directional traffic

Enumerationr/w

Enumerated Values:

0	ingress
1	egress
2	both

.1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.4

mirrorVcRowStatus

Row status of the table entry.

pppoeAgentCircuitIDEnable

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.11.11.2.1.5

pppoeAgentTable

table

.1.3.6.1.4.1.890.1.5.12.49.12.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pppoeAgentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::pppoeAgentTable'

A table that contains PPPoE intermediate agent configuration.

pppoeAgentEntry row .1.3.6.1.4.1.890.1.5.12.49.12.1.1

An entry of pppoeAgentTable.

Indexes

pppoeAgentVlanId

Column Syntax OID

pppoeAgentVlanId

Specify the VLAN ID for the pppoeAgent configuration

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.12.1.1.1

pppoeAgentMode

pppoeTransparent(1) - PPPoE frames are transparent
pppoeIA(2) - PPPoE intermediate agent function is enabled

Enumerationr/w

Enumerated Values:

1	pppoeTransparent
2	pppoeIA

.1.3.6.1.4.1.890.1.5.12.49.12.1.1.2

Enable/disable insert the circuit ID to PPPoE packet in intermediate agent mode.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.12.1.1.3

pppoeAgentCircuitIDInfo

User specific PPPoE circuit ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>?,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port…

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.890.1.5.12.49.12.1.1.4

pppoeAgentRemoteIDEnable

Enable/disable insert the remote ID to PPPoE packet in intermediate agent mode.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.12.1.1.5

pppoeAgentRemoteIDInfo

User specific PPPoE remote ID info.
Info is composed by the following components
special characters except % => ~`!@#$^&*()-=_+{}<>?,./
%%: equals character %
%0x00~%0xFF: represents byte value
%pname: configured port …

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.890.1.5.12.49.12.1.1.6

pppoeAgentRowStatus

Row status of the table entry.

qosShapingProfileQueue7MaxRate

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.12.1.1.7

qosShapingProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.13.3 · 1 row entry · 18 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk qosShapingProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::qosShapingProfileTable'

Configures shaping profiles.

qosShapingProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.13.3.1

Indexes

qosShapingProfileName

Column Syntax OID

qosShapingProfileName

Profile name

kbpsOctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.1

The maximum rate of queue 7.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.2

qosShapingProfileQueue6MaxRate

The maximum rate of queue 6.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.3

qosShapingProfileQueue5MaxRate

The maximum rate of queue 5.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.4

qosShapingProfileQueue4MaxRate

The maximum rate of queue 4.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.5

qosShapingProfileQueue3MaxRate

The maximum rate of queue 3.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.6

qosShapingProfileQueue2MaxRate

The maximum rate of queue 2.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.7

qosShapingProfileQueue1MaxRate

The maximum rate of queue 1.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.8

qosShapingProfileQueue0MaxRate

The maximum rate of queue 0.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.9

qosShapingProfileQueue7Depth

The queue depth of queue 7.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.10

qosShapingProfileQueue6Depth

The queue depth of queue 6.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.11

qosShapingProfileQueue5Depth

The queue depth of queue 5.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.12

qosShapingProfileQueue4Depth

The queue depth of queue 4.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.13

qosShapingProfileQueue3Depth

The queue depth of queue 3.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.14

qosShapingProfileQueue2Depth

The queue depth of queue 2.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.15

qosShapingProfileQueue1Depth

The queue depth of queue 1.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.16

qosShapingProfileQueue0Depth

The queue depth of queue 0.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.17

qosShapingProfileRowStatus

Row status of the table entry.

qosVcShapingProfileMaxRate

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.13.3.1.18

qosVcShapingProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.13.7 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk qosVcShapingProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::qosVcShapingProfileTable'

Configures ATM shaping profiles.

qosVcShapingProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.13.7.1

Indexes

qosVcShapingProfileName

Column Syntax OID

qosVcShapingProfileName

Profile name

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.13.7.1.1

The max rate of VC shaping profile.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.7.1.2

qosVcShapingProfileQueueDepth

The queue depth of VC shaping profile.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.7.1.3

qosVcShapingProfileRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.13.7.1.4

qosPortConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.13.8 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk qosPortConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::qosPortConfTable'

Configures referenced QoS algorithm and QoS profile to UNI ports

qosPortConfEntry row .1.3.6.1.4.1.890.1.5.12.49.13.8.1

Indexes

qosPortConfShapingProfile

Column Syntax OID

Configures shaping profile on specified UNI port.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.13.8.1.1

qosPortConfAlgorithm

Configures QoS algorighm on specified UNI port.

Enumerationr/w

Enumerated Values:

1	sp
2	wfq
3	spWfq
4	shaping

.1.3.6.1.4.1.890.1.5.12.49.13.8.1.3

qosPortConfMaxRate

Configures maximum rate on specified UNI port.

kbpsInteger32r/w

Constraints:
range: 32-100000

.1.3.6.1.4.1.890.1.5.12.49.13.8.1.4

qosPortConfWeightProfile

Configures weight profile on specified UNI port.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.13.8.1.5

qosVcConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.13.9 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk qosVcConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::qosVcConfTable'

qosVcConfEntry row .1.3.6.1.4.1.890.1.5.12.49.13.9.1

Indexes

Column	Syntax	OID
qosVcConfShapingProfile Configures ATM shaping profile on specified ATM VC.	OctetStringr/w Constraints: `range: 1-31`	`.1.3.6.1.4.1.890.1.5.12.49.13.9.1.1`

dscpMappingTable

table

.1.3.6.1.4.1.890.1.5.12.49.13.11.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dscpMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dscpMappingTable'

The table contains DSCP mapping configuration.

dscpMappingEntry row .1.3.6.1.4.1.890.1.5.12.49.13.11.1.1

An entry of dscpMappingTable.

Indexes

dscpSrcCodePoint

Column	Syntax	OID
dscpSrcCodePoint The DSCP source code point used for mapping.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.13.11.1.1.1`
dscpMapPriority The mapping p bits that will replace the source p bits in the incoming packet.	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.890.1.5.12.49.13.11.1.1.2`

dscpPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.13.11.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dscpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dscpPortTable'

The table contains DSCP mapping configuration for the xDSL and ethernet ports.

dscpPortEntry row .1.3.6.1.4.1.890.1.5.12.49.13.11.2.1

An entry of dscpPortTable.

Indexes

qosWeightProfileQueue7Weight

Column Syntax OID

dscpStatusEnable

The DSCP port status.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.13.11.2.1.1

qosWeightProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.13.13 · 1 row entry · 18 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk qosWeightProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::qosWeightProfileTable'

Configures weight profiles.

qosWeightProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.13.13.1

Indexes

qosWeightProfileName

Column Syntax OID

qosWeightProfileName

Name of Weight profile. This is a table index.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.1

The weight setting of queue 7.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.2

qosWeightProfileQueue6Weight

The weight setting of queue 6.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.3

qosWeightProfileQueue5Weight

The weight setting of queue 5.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.4

qosWeightProfileQueue4Weight

The weight setting of queue 4.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.5

qosWeightProfileQueue3Weight

The weight setting of queue 3.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.6

qosWeightProfileQueue2Weight

The weight setting of queue 2.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.7

qosWeightProfileQueue1Weight

The weight setting of queue 1.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.8

qosWeightProfileQueue0Weight

The weight setting of queue 0.

Integer32r/w

Constraints:
range: 1-50

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.9

qosWeightProfileQueue7Depth

The queue depth of queue 7.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.10

qosWeightProfileQueue6Depth

The queue depth of queue 6.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.11

qosWeightProfileQueue5Depth

The queue depth of queue 5.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.12

qosWeightProfileQueue4Depth

The queue depth of queue 4.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.13

qosWeightProfileQueue3Depth

The queue depth of queue 3.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.14

qosWeightProfileQueue2Depth

The queue depth of queue 2.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.15

qosWeightProfileQueue1Depth

The queue depth of queue 1.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.16

qosWeightProfileQueue0Depth

The queue depth of queue 0.

Integer32r/w

Constraints:
range: 16-255

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.17

qosWeightProfileRowStatus

Row status of the table entry.

securedClientIpStartIpAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.13.13.1.18

securedClientIpTable

table

.1.3.6.1.4.1.890.1.5.12.49.14.2 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk securedClientIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::securedClientIpTable'

A table that contains information about IPv4 secured clients.

securedClientIpEntry row .1.3.6.1.4.1.890.1.5.12.49.14.2.1

A list of secured client entry.

Indexes

securedClientIpIndex

Column Syntax OID

securedClientIpIndex

The index of the entry.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.890.1.5.12.49.14.2.1.1

The start IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings.

securedClientIpEndIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.14.2.1.2

The end IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings.

securedClientIpv6IpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.14.2.1.3

securedClientIpService

Each bit corresponds to a service. The bit is settings to 1 if the
service is enabled, and settings to 0 if the service is disabled.
The various bit positions are:
BIT 0: icmp
BIT 1: telnet
BIT 2: ftp
BIT 3: snmp
BIT 4:…

Bitsr/w

Enumerated Values:

0	icmp
1	telnet
2	ftp
3	snmp
4	http
5	ssh
6	https
7	voip

.1.3.6.1.4.1.890.1.5.12.49.14.2.1.4

securedClientIpEnable

Enable/disable the entry.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.14.2.1.5

securedClientIpv6Table

table

.1.3.6.1.4.1.890.1.5.12.49.14.3 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk securedClientIpv6Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::securedClientIpv6Table'

A table that contains information about IPv6 secured clients.

securedClientIpv6Entry row .1.3.6.1.4.1.890.1.5.12.49.14.3.1

A list of IPv6 secured client entry.

Indexes

securedClientIpv6Index

Column Syntax OID

securedClientIpv6Index

The index of the entry.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.890.1.5.12.49.14.3.1.1

The IP address (:: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) of the IPv6 secured client settings.

INET-ADDRESS-MIBInetAddressIPv6r/w

Type Constraints:
range: 16

.1.3.6.1.4.1.890.1.5.12.49.14.3.1.2

securedClientIpv6IpMask

The Mask of the IPv6 secured client settings.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.890.1.5.12.49.14.3.1.3

securedClientIpv6Service

Bitsr/w

Enumerated Values:

0	icmp
1	telnet
2	ftp
3	snmp
4	http
6	https

.1.3.6.1.4.1.890.1.5.12.49.14.3.1.4

securedClientIpv6Enable

Enable/disable the entry.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.14.3.1.5

snmpTrapDestTable

table

.1.3.6.1.4.1.890.1.5.12.49.15.1 · 1 row entry · 6 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::snmpTrapDestTable'

Sets the IP addresses of up to four SNMP managers (stations to send your SNMP traps to).
You can configure up to four managers.

snmpTrapDestEntry row .1.3.6.1.4.1.890.1.5.12.49.15.1.1

Indexes

snmpTrapDestIndex

Column Syntax OID

snmpTrapDestIndex

index of the table

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.890.1.5.12.49.15.1.1.1

snmpTrapDestIpAddressType

SNMP trap destination IP address type

Enumerationr/w

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.49.15.1.1.2

snmpTrapDestIpAddress

SNMP trap destination IP address
<ipv4-address> 0.0.0.0 ~ 223.255.255.255
<ipv6-address> :: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Limit: snmpTrapDestIpAddressType must be set before snmpTrapDestIpAddress.

tacscsplusAuthenServerIndex

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.15.1.1.3

snmpTrapDestUdpPort

SNMP manager UDP port.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.890.1.5.12.49.15.1.1.4

snmpTrapDestVersion

SNMP version.

Enumerationr/w

Enumerated Values:

1	v1
2	v2c
3	v3

.1.3.6.1.4.1.890.1.5.12.49.15.1.1.5

snmpTrapDestUserName

Must match an existing account on the Switch.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.12.49.15.1.1.6

snmpUserTable

table

.1.3.6.1.4.1.890.1.5.12.49.15.5 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::snmpUserTable'

Sets the authentication level for SNMP v3 user authentication.
Optionally, specifies the authentication and encryption methods for communication with the SNMP manager.

snmpUserEntry row .1.3.6.1.4.1.890.1.5.12.49.15.5.1

Indexes

snmpUserName

Column Syntax OID

snmpUserName

User name

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.15.5.1.1

snmpUserSecurityLevel

noauth: Use the username as the password string sent to the SNMP manager.
This is equivalent to the Get, Set and Trap Community in SNMP v2c. This is the lowest security level.
auth: Implement an authentication algorithm…

Enumerationr/w

Enumerated Values:

1	noauth
2	auth
3	priv

.1.3.6.1.4.1.890.1.5.12.49.15.5.1.2

snmpUserAuthProtocol

Specify MD5 or SHA authentication algorithm.

Enumerationr/w

Enumerated Values:

1	md5
2	sha

.1.3.6.1.4.1.890.1.5.12.49.15.5.1.3

snmpUserPrivProtocol

Specify DES or AES encryption algorithm.

Enumerationr/w

Enumerated Values:

1	des
2	aes

.1.3.6.1.4.1.890.1.5.12.49.15.5.1.4

authorPrivModeTable

table

.1.3.6.1.4.1.890.1.5.12.49.16.14.3.1 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk authorPrivModeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::authorPrivModeTable'

This table is to configure the mode of authorization for each privilege

authorPrivModeEntry row .1.3.6.1.4.1.890.1.5.12.49.16.14.3.1.1

An entry of authorPrivModeEntry.

Indexes

authorPrivilege

Column Syntax OID

authorPrivilege

Set the privilege level for authorization, every command will have its assigned privilege,
authorization happens when user executes a command which privilege is specified here.
Accepted value is 1~14

Integer32

Constraints:
range: 1-14

.1.3.6.1.4.1.890.1.5.12.49.16.14.3.1.1.1

authorMode

Set the authorization mode when authorization occurred.
none: no authorization
local: commands will be authorized with default privilege
tacacs+: authorization will be sent to remote tacacs+ server.
tacacs+ then none: a…

Enumerationr/w

Enumerated Values:

0	local
1	tacacsplus
2	tacacsplus_then_local

.1.3.6.1.4.1.890.1.5.12.49.16.14.3.1.1.2

radiusAuthenServerTable

table

.1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAuthenServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::radiusAuthenServerTable'

radiusAuthenServerEntry row .1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1

An entry of radiusAuthenServerTable.

Indexes

radiusAuthenServerIndex

Column	Syntax	OID
radiusAuthenServerIndex The index of the server.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1.1`
radiusAuthenServerIP The IP address of specified radius server.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1.2`
radiusAuthenServerPort The UDP port of specified radius server	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1.3`
radiusAuthenServerSecret A string key shared with the radius server	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.49.16.14.4.1.3.1.4`

radiusAcctServerTable

table

.1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::radiusAcctServerTable'

radiusAcctServerEntry row .1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1

An entry of radiusAcctServerTable.

Indexes

radiusAcctServerIndex

Column	Syntax	OID
radiusAcctServerIndex The index of the server.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1.1`
radiusAcctServerIP The IP address of specified radius server.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1.2`
radiusAcctServerPort The UDP port of specified radius server	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1.3`
radiusAcctServerSecret A string key shared with the radius server	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.49.16.14.4.2.3.1.4`

tacacsplusAuthenServerTable

table

.1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsplusAuthenServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::tacacsplusAuthenServerTable'

tacacsplusAuthenServerEntry row .1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1

An entry of tacacsplusAuthServerTable.

Indexes

Column	Syntax	OID
tacscsplusAuthenServerIndex The index of the server.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1.1`
tacscsplusAuthenServerIP The IP address of specified tacacs+ server.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1.2`
tacscsplusAuthenServerPort The TCP port of specified tacacs+ server	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1.3`
tacscsplusAuthenServerSecret A string key shared with the tacacs+ server	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.1.3.1.4`

tacacsplusAcctServerTable

table

.1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsplusAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::tacacsplusAcctServerTable'

tacacsplusAcctServerEntry row .1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1

An entry of tacacsplusAcctServerTable.

Indexes

tacacsplusAcctServerIndex

Column	Syntax	OID
tacacsplusAcctServerIndex The index of the server.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1.1`
tacacsplusAcctServerIP The IP address of specified tacacs+ server.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1.2`
tacacsplusAcctServerPort The TCP port of specified tacacs+ server	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1.3`
tacacsplusAcctServerSecret A string key shared with the tacacs+ server	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.2.3.1.4`

tacacsplusAuthorServerTable

table

.1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsplusAuthorServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::tacacsplusAuthorServerTable'

This table is supported by R5.06 and later versions.

tacacsplusAuthorServerEntry row .1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1

An entry of tacacsplusAuthorServerEntry.
This table is supported by R5.06 and later versions.

Indexes

tacacsplusAuthorServerIndex

Column	Syntax	OID
tacacsplusAuthorServerIndex The index of the server.	Integer32 Constraints: `range: 1-2`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1.1`
tacacsplusAuthorServerIP TACACS+ server IP for command authorization.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1.2`
tacacsplusAuthorServerPort TACACS+ server port for command authorization.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1.3`
tacacsplusAuthorServerSecret TACACS+ server secret key for command authorization.	RFC1213-MIBDisplayStringr/w	`.1.3.6.1.4.1.890.1.5.12.49.16.14.5.3.3.1.4`

subrPortTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::subrPortTable'

This table includes subscriber attributes for the port.

subrPortEntry row .1.3.6.1.4.1.890.1.5.12.49.17.3.1

An entry in subrPortTable.

Indexes

VDSL2-LINE-MIBxdsl2LConfProfProfileName

Column	Syntax	OID
subrPortName Name of the subscriber.	OctetStringr/w Constraints: `range: 0-31`	`.1.3.6.1.4.1.890.1.5.12.49.17.3.1.1`
subrPortAlarmProf Alarm profile for the subscriber port(s).	OctetStringr/w Constraints: `range: 0-31`	`.1.3.6.1.4.1.890.1.5.12.49.17.3.1.2`

vdsl2LineConfProfileExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.4.1 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vdsl2LineConfProfileExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vdsl2LineConfProfileExtendedTable'

This table contains information on the VDSL2 line profile extension configuration.

vdsl2LineConfProfileExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.4.1.1

An entry in vdsl2LineProfileExtendedEntry.

Indexes

Column Syntax OID

vdsl2LineConfProfileDpboEPsdID

standard psd shape id for psd toolbox

Enumerationr/w

Enumerated Values:

1	psd_co
2	psd_flat
3	psd_cab_ansi
4	psd_cab_etsi
5	psd_exch_etsi
6	psd_exch_ansi

.1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.1

vdsl2LineConfProfileBitSwapDs

Enable or disable downstream bit swap.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.2

vdsl2LineConfProfileBitSwapUs

Enable or disable upstream bit swap.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.3

vdsl2LineConfProfileTransmissionType

The transmission mode when link up.

Bitsr/w

Enumerated Values:

0	vdsl2
1	adsl2plus
2	adsl2
3	gdmt
4	t1413
5	glite
6	annexM
7	annexL
8	annexJ
9	annexI

.1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.4

vdsl2LineConfProfileProfileName

The line profile name.

VDSL2-LINE-MIBxdsl2LineAlarmConfProfileName

.1.3.6.1.4.1.890.1.5.12.49.17.4.1.1.5

vdsl2LineAlarmConfProfileExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.4.2 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vdsl2LineAlarmConfProfileExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vdsl2LineAlarmConfProfileExtendedTable'

This table contains information on the VDSL2 line alarm profile extension configuration.

vdsl2LineAlarmConfProfileExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.4.2.1

An entry in vdsl2LineAlarmConfProfileExtendedEntry.

Indexes

Column	Syntax	OID
vdsl2LineAlarmConfProfileXtucThresh15MinLofs A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc 1. The value 0 means that no threshold is specified for the associated counter. Units:seconds	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.4.2.1.1`
vdsl2LineAlarmConfProfileXturThresh15MinLofs A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur 2. The value 0 means that no threshold is specified for the associated counter. Units:seconds	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.4.2.1.2`
vdsl2LineAlarmConfProfileXturThresh15MinLprs A threshold for the xdsl2PMLCurr15MLprs counter. The value 0 means that no threshold is specified for the associated counter. Units:seconds	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.4.2.1.3`
vdsl2LineAlarmConfProfileProfileName The alarm line profile name.	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.17.4.2.1.4`

vdsl2ChanConfProfileExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.4.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vdsl2ChanConfProfileExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::vdsl2ChanConfProfileExtendedTable'

This table contains information on the VDSL2 channel profile extension configuration.

vdsl2ChanConfProfileExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.4.3.1

An entry in vdsl2ChanConfProfileExtendedEntry.

Indexes

vdsl2ChanConfProfileProfileName

Column Syntax OID

vdsl2ChanConfProfilePhyRDs

Configure downstream PhyR mode.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
3	auto

.1.3.6.1.4.1.890.1.5.12.49.17.4.3.1.1

vdsl2ChanConfProfilePhyRUs

Configure upstream PhyR mode.

Enumerationr/w

Enumerated Values:

1	enable
2	disable
3	auto

.1.3.6.1.4.1.890.1.5.12.49.17.4.3.1.2

vdsl2ChanConfProfileProfileName

The channel profile name.

RFC1213-MIBifIndex VDSL2-LINE-MIBxdsl2LineBand

.1.3.6.1.4.1.890.1.5.12.49.17.4.3.1.3

xdsl2LineBandExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2LineBandExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2LineBandExtendedTable'

This table show tx power of band.

xdsl2LineBandExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.1.1

An entry of xdsl2LineBandExtendedTable.

Indexes

Column	Syntax	OID
xdsl2LineBandTxPower Xdsl line band Tx power (in unit of 0.1 Dbm, -1280 indicates that power is empty)	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.1.1.1`

xdsl2PMLineCurrExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMLineCurrExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMLineCurrExtendedTable'

The table xdsl2PMLineCurrExtendedTable contains current Performance
Monitoring results for DSL lines.

xdsl2PMLineCurrExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1.1

One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of this
table is the termination unit.

Indexes

RFC1213-MIBifIndex xdsl2PMLCurrUnit

Column Syntax OID

xdsl2PMLCurrUnit

The termination unit.

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1.1.1

xdsl2PMLCurr15MLofs

Count of seconds during this interval that there was Loss of Frame.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1.1.2

xdsl2PMLCurr1DayLofs

Count of seconds during this interval that there was Loss of Frame.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.1.1.3

xdsl2PMLineInitCurrExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMLineInitCurrExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMLineInitCurrExtendedTable'

The table xdsl2PMLineInitCurrExtendedTable contains current Performance
Monitoring results for DSL lines.

xdsl2PMLineInitCurrExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1

One index of this table is an interface index where the
interface has an ifType of vdsl2(251).

Indexes

RFC1213-MIBifIndex xdsl2PMLHist15MUnit xdsl2PMLHist15MInterval

Column	Syntax	OID
xdsl2PMLInitCurr15MLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.1`
xdsl2PMLInitCurr15MLol Count of times for Loss of Link during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.2`
xdsl2PMLInitCurr15MLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.3`
xdsl2PMLInitCurr15MLpr Count of times for Loss of Power during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.4`
xdsl2PMLInitCurr1DayLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.5`
xdsl2PMLInitCurr1DayLol Count of times for Loss of Link during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.6`
xdsl2PMLInitCurr1DayLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.7`
xdsl2PMLInitCurr1DayLpr Count of times for Loss of Power during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.2.1.8`

xdsl2PMLineHist15MinExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMLineHist15MinExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMLineHist15MinExtendedTable'

The table xdsl2PMLineHist15MinExtendedTable contains PM line history
for 15-minute intervals of DSL line.

xdsl2PMLineHist15MinExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3.1

One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of this
table is the transmission unit. The third index is the interval
number.

Indexes

Column Syntax OID

xdsl2PMLHist15MUnit

The termination unit.

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3.1.1

xdsl2PMLHist15MInterval

The interval number.

Unsigned32

Constraints:
range: 1-96

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3.1.2

xdsl2PMLHist15MLofs

Count of seconds during this interval that there was Loss of Frame.

RFC1213-MIBifIndex xdsl2PMLHist1DUnit xdsl2PMLHist1DInterval

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.3.1.3

xdsl2PMLineHist1DayExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMLineHist1DayExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMLineHist1DayExtendedTable'

The table xdsl2PMLineHist1DayExtendedTable contains PM line history
for 1 day intervals of DSL line.

xdsl2PMLineHist1DayExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4.1

One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index of this
table is the transmission unit. The third index is the interval
number.

Indexes

Column Syntax OID

xdsl2PMLHist1DUnit

The termination unit.

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4.1.1

xdsl2PMLHist1DInterval

The interval number.

Unsigned32

Constraints:
range: 1-30

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4.1.2

xdsl2PMLHist1DLofs

Count of seconds during this interval that there was Loss of Frame.

RFC1213-MIBifIndex xdsl2PMLHist15MInterval

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.4.1.3

xdsl2PMLineInitHist15MinExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMLineInitHist15MinExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMLineInitHist15MinExtendedTable'

The table xdsl2PMLineInitHist15MinExtendedTable contains PM line history
for 15-minute intervals of DSL line.

xdsl2PMLineInitHist15MinExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1

One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index is the interval
number.

Indexes

Column	Syntax	OID
xdsl2PMLInitHist15MInterval The interval number.	Unsigned32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.1`
xdsl2PMLInitHist15MLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.2`
xdsl2PMLInitHist15MLol Count of times for Loss of Link during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.3`
xdsl2PMLInitHist15MLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.4`
xdsl2PMLInitHist15MLpr Count of times for Loss of Power during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.5.1.5`

xdsl2PMLineInitHist1DayExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMLineInitHist1DayExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMLineInitHist1DayExtendedTable'

The table xdsl2PMLineInitHist1DayExtendedTable contains PM line history
for 1 day intervals of DSL line.

xdsl2PMLineInitHist1DayExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1

One index of this table is an interface index where the
interface has an ifType of vdsl2(251). A second index is the
interval number.

Indexes

RFC1213-MIBifIndex xdsl2PMLHist1DInterval

Column	Syntax	OID
xdsl2PMLInitHist1DInterval The interval number.	Unsigned32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.1`
xdsl2PMLInitHist1DLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.2`
xdsl2PMLInitHist1DLol Count of times for Loss of Link during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.3`
xdsl2PMLInitHist1DLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.4`
xdsl2PMLInitHist1DLpr Count of times for Loss of Power during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.17.5.2.1.6.1.5`

xdsl2PMChCurrExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMChCurrExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMChCurrExtendedTable'

The table xdsl2PMChCurrExtendedTable contains current Performance
Monitoring results for DSL channels.

xdsl2PMChCurrExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1.1

One index of this table is an interface index where the
interface has an ifType of a DSL channel. A second index of
this table is the termination unit.

Indexes

RFC1213-MIBifIndex xdsl2PMChCurrUnit

Column Syntax OID

xdsl2PMChCurrUnit

The termination unit.

xdsl2PMChCurr15MUncorrectBlocks

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1.1.1

Count of all blocks received with uncorrectable errors in the channel within the current 15 minute interval.

xdsl2PMChCurr1DayUncorrectBlocks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1.1.2

Count of all blocks received with uncorrectable errors in the channel during the interval.

RFC1213-MIBifIndex xdsl2PMChHist15MUnit xdsl2PMChHist15MInterval

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.1.1.3

xdsl2PMChHist15MinExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMChHist15MinExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMChHist15MinExtendedTable'

The extended table xdsl2PMChHist15MinTable contains Performance
Monitoring (PM) history for 15-minute intervals for DSL channels
PM.

xdsl2PMChHist15MinExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2.1

One index of this table is an interface index where the
interface has an ifType of a DSL channel. A second index of
this table is the transmission unit. The third index is the
interval number.

Indexes

Column Syntax OID

xdsl2PMChHist15MUnit

The termination unit.

xdsl2PMChHist15MUncorrectBlocks

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2.1.1

xdsl2PMChHist15MInterval

The interval number.

Unsigned32

Constraints:
range: 1-96

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2.1.2

Count of all blocks received with uncorrectable errors on this channel within the history 15 minute interval.

RFC1213-MIBifIndex xdsl2PMChHist1DUnit xdsl2PMChHist1DInterval

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.2.1.3

xdsl2PMChHist1DExtendedTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2PMChHist1DExtendedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2PMChHist1DExtendedTable'

The extended table xdsl2PMChHist1DTable contains Performance
Monitoring (PM) history for 1 day intervals for DSL channels
PM.

xdsl2PMChHist1DExtendedEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3.1

One index of this table is an interface index where the
interface has an ifType of a DSL channel. A second index of
this table is the transmission unit. The third index is the
interval number.

Indexes

Column Syntax OID

xdsl2PMChHist1DUnit

The termination unit.

xdsl2PMChHist1DUncorrectBlocks

Type Values:

1	xtuc
2	xtur

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3.1.1

xdsl2PMChHist1DInterval

The interval number.

Unsigned32

Constraints:
range: 1-30

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3.1.2

Count of all blocks received with uncorrectable errors on this channel within the history 1 day interval.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.890.1.5.12.49.17.5.2.2.3.1.3

xdsl2LineStatusTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.5.3 · 1 row entry · 5 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2LineStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2LineStatusTable'

This table shows line status.

xdsl2LineStatusEntry row .1.3.6.1.4.1.890.1.5.12.49.17.5.3.1

An entry of xdsl2LineStatusTable.

Indexes

Column Syntax OID

xdsl2LineStatus

Xdsl line status.

Enumeration

Enumerated Values:

1	inactive
2	training
3	linkUp
4	linkDown

.1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.1

xdsl2LineProtocol

Xdsl line protocol.

Enumeration

Enumerated Values:

1	none
2	vdsl8a
3	vdsl8b
4	vdsl8c
5	vdsl8d
6	vdsl12a
7	vdsl12b
8	vdsl17a
9	gdmt
10	glite
11	adsl2
12	adsl2plus
13	t1413

.1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.2

xdsl2LineUptime

Xdsl line uptime. The unit is second.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.3

xdsl2LineTxRate

Xdsl line tx rate.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.4

xdsl2LineRxRate

Xdsl line rx rate.

RFC1213-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusDirection

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.17.5.3.1.5

xdsl2ExtendedSCStatusTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.8.1.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtendedSCStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2ExtendedSCStatusTable'

The table xdsl2ExtendedSCStatusTable extends xdsl2SCStatusTable for
Zyxel product.

xdsl2ExtendedSCStatusEntry row .1.3.6.1.4.1.890.1.5.12.49.17.8.1.1.1

The table xdsl2ExtendedSCStatusTable contains extra subcarrier
status parameters besides those in xdsl2LineSegmentTable.

Indexes

Column	Syntax	OID
xdsl2SCStatusActAtp Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dBm (Physical val…	0.1 dBmInteger32 Constraints: `range: -310-310` `range: 2147483647-2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.17.8.1.1.1.1`

xdsl2ExtendedSCStatusBandTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.8.1.2 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtendedSCStatusBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdsl2ExtendedSCStatusBandTable'

The table xdsl2ExtendedSCStatusBandTable extends xdsl2SCStatusBandTable for
Zyxel product.

xdsl2ExtendedSCStatusBandEntry row .1.3.6.1.4.1.890.1.5.12.49.17.8.1.2.1

The table xdsl2ExtendedSCStatusBandTable contains extra subcarrier
status parameters that are grouped per-band besides those in
xdsl2SCStatusBandTable.

Indexes

RFC1213-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusBand

Column	Syntax	OID
xdsl2SCStatusBandSnrMargin SNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for a…	0.1 dBInteger32 Constraints: `range: -640-630` `range: 2147483646-2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.17.8.1.2.1.1`

forcePortSettingTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.9 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk forcePortSettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::forcePortSettingTable'

This table includes force port settings for the port.

forcePortSettingEntry row .1.3.6.1.4.1.890.1.5.12.49.17.9.1

An entry in forcePortSettingTable.

Indexes

xdslBondingConfigMemberPort

Column Syntax OID

forcePortTransType

Configures allowed transmission type.
The setting is undefined and system takes settings for transmission type, Annex M, L, I, J, power management, and TX power mode from profile.
If it is set, the settings will be fr…

Enumerationr/w

Enumerated Values:

0	profile
1	auto
2	vdsl2
3	adsl2plus
4	adsl2
5	gdmt
6	glite
7	t1413

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.1

forcePortAnnexM

Enable/Disable Annex M. This is ADSL specific setting.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.2

forcePortAnnexL

Enable/Disable Annex L. This is ADSL specific setting.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.3

forcePortAnnexI

Enable/Disable Annex I. This is ADSL specific setting.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.4

forcePortAnnexJ

Enable/Disable Annex J. This is ADSL specific setting.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.5

forcePortPmMode

Configures Power Management operating mode.
(used for ADSL2 and ADSL2+ protocol)

disable: disable power management.
allowL3: dsl could autonomously transmit to idle (L3) state
allowL2: dsl could autonomou…

Enumerationr/w

Enumerated Values:

0	disable
1	allowL3
2	allowL2
3	allowBoth

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.6

forcePortL0Time

Configures Power Management parameters
(used for ADSL2 and ADSL2+ protocol).

The unit is seconds.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.7

forcePortL2Time

Configures Power Management parameters
(used for ADSL2 and ADSL2+ protocol).

The unit is seconds.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.8

forcePortL2PwrDnStep

Configures Power Management parameters
(used for ADSL2 and ADSL2+ protocol).

The unit is dB.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.9

forcePortL2PwrDnMax

Configures Power Management parameters
(used for ADSL2 and ADSL2+ protocol).

The unit is dB.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.10

forcePortTxPwrMode

Configures TX Power Mode.

fix: Fix to maximum of rate.
power: priority to power.
rate: priority to rate.

Enumerationr/w

Enumerated Values:

0	fix
1	power
2	rate

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.11

forcePortMinInpDs

Configure downstream minimum INP for 4.3125KHz carrier space DSL link.
The unit is 0.5 symbol.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.12

forcePortMinInpUs

Configure upstream minimum INP for 4.3125KHz carrier space DSL link.
The unit is 0.5 symbol.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.13

forcePortMaxUsTxPwr

Configure maximum upstream allowed transmit power.
The unit is 0.1 dBm.

Integer32r/w

Constraints:
range: -130-200

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.14

forcePortMaxDsTxPwr

Configure maximum downstream allowed transmit power.
The unit is 0.1 dBm.

Integer32r/w

Constraints:
range: -50-200

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.15

forcePortMaxUsRxPwr

Configure maximum aggregate receive power at the ATU-C.
The unit is 0.1 dBm.

Integer32r/w

Constraints:
range: -255-255

.1.3.6.1.4.1.890.1.5.12.49.17.9.1.16

xdslBondingConfigTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.10.1 · 1 row entry · 7 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdslBondingConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdslBondingConfigTable'

This table contains information on the xdsl bonding configuration.

xdslBondingConfigEntry row .1.3.6.1.4.1.890.1.5.12.49.17.10.1.1

An entry in xdslBondingConfigEntry.

Indexes

xdslBondingConfigName

Column Syntax OID

xdslBondingConfigName

Bonding group name.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.1

xdslBondingConfigActive

Active bonding.

Enumerationr/w

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.2

Set bonding port-list.

Q-BRIDGE-MIBPortListr/w

.1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.3

xdslBondingConfigMode

Set adsl/vdsl protocol.

Enumerationr/w

Enumerated Values:

0	atm
1	ptm
2	auto

.1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.4

xdslBongingConfigLineTemp

Configures the referenced DSL line template.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.5

xdslBondingConfigFallbackTemp

Configures the referenced DSL fallback template.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.6

xdslBondingConfigRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.17.10.1.1.7

xdslBondingStatusTable

table

.1.3.6.1.4.1.890.1.5.12.49.17.10.2 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdslBondingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::xdslBondingStatusTable'

This table contains information on the xdsl bonding status.

xdslBondingStatusEntry row .1.3.6.1.4.1.890.1.5.12.49.17.10.2.1

An entry in xdslBondingStatusEntry.

Indexes

xdslBondingStatusName

Column Syntax OID

xdslBondingStatusName

The name of the bonding group.

xdslBondingStatusMemberPort

.1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.1

xdslBondingStatusActive

The status of the bonding group.

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.2

The member port of the bonding group.

xdslBondingStatusActivePort

.1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.3

The active port of the bonding group.

xdslBondingStatusMainPort

.1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.4

The main port of the bonding group.

xdslBondingStatusTransferMode

.1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.5

The transfer mode of the bonding group.

Enumeration

Enumerated Values:

0	atm
1	ptm
2	none

.1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.6

xdslBondingStatusRateUs

The Us group rate of the bonding group.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.7

xdslBondingStatusRateDs

The Ds group rate of the bonding group.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.17.10.2.1.8

mltResultTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.1.5 · 1 row entry · 27 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mltResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::mltResultTable'

mlt result

mltResultEntry row .1.3.6.1.4.1.890.1.5.12.49.18.1.5.1

Indexes

Column Syntax OID

mltVacTip

AC voltage between TIP and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Me…

0.1 rmsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.1

mltVacRing

AC voltage between RING and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not M…

0.1 rmsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.2

mltVacDiff

AC voltage between TIP and RING.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Meas…

0.1 rmsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.3

mltVdcTip

DC voltage between TIP and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Me…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.4

mltVdcRing

DC voltage between RING and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not M…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.5

mltVdcDiff

DC voltage between TIP and RING.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Meas…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.6

mltRLoop

Loop Resistance.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured' reason # 2…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.7

mltRtg

Resistance between TIP and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'No…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.8

mltRrg

Resistance between RING and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.9

mltRtr

Resistance between TIP and RING.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not …

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.10

mltCtg

Capacitance between TIP and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not M…

10^-10 FSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.11

mltCrg

Capacitance between RING and GROUND.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not …

10^-10 FSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.12

mltCtr

Capacitance between TIP and RING.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Mea…

10^-10 FSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.13

mltRen

REN(ring equivalent number).
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Meas…

0.1 renSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.14

mltVRing

Ring voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured' reason # 2: C…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.15

mltVMetering

Metering pulse voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured' rea…

0.1 vpeakSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.16

mltDialToneDetected

Whether dial tone is detected.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.17

mltDetectedDtmfCount

Number of DTMF tone detected.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measure…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.18

mltDialToneDelay

Dail tone delay between played out and detected.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
25000…

0.001 secSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.19

mltReceiverOffHook

Receiver off-hook test.
[Normal Value]:
1 : On hook.
2 : Off hook.
3 : circuit short or fault.
4 : circuit open.

[Special value]:
250000016 : No result.
250000032 : Test fa…

Enumeration

Enumerated Values:

1	onhook
2	offhook
3	short
4	open

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.20

mltLoopRload

Loop resistance.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured' reason # 2…

1 ohmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.21

mltLoopIMetallic

Metallic current.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured' reason # …

10^-6 ampSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.22

mltLoopVAB

Sensed AB voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured' reason #…

0.001 voltSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.23

mltLoopVBL

Low battery voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured' reason…

0.001 voltSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.24

mltLoopVBH

High battery voltage.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured' reaso…

0.001 voltSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.25

mltRrev

Reverse polarity Resistance.
[Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'Not Measured…

1 ohmSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.26

mltDetectedDtmfDigit

digit of DTMF tone detected.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.890.1.5.12.49.18.1.5.1.27

voipPotsRingTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.4.6 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voipPotsRingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::voipPotsRingTable'

voipPotsRingEntry row .1.3.6.1.4.1.890.1.5.12.49.18.4.6.1

An entry in voipPotsRingEntry.

Indexes

voipPotsRingIndex

Column Syntax OID

voipPotsRingIndex

index

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.1

voipPotsRingName

name

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.2

voipPotsRingOn1

first on time

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.3

voipPotsRingOff1

first off time

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.4

voipPotsRingOn2

second on time

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.5

voipPotsRingOff2

second off time

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.6

voipPotsRingOn3

third on time

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.7

voipPotsRingOff3

third off time

voipDspProfileEchoCancelEnable

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.8

voipPotsRingSetDefault

Set default value.

Enumerationr/w

Enumerated Values:

0	none
1	name
2	pattern

.1.3.6.1.4.1.890.1.5.12.49.18.4.6.1.9

voipDspProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.7 · 1 row entry · 14 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voipDspProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::voipDspProfileTable'

Configures specified VoIP DSP profile.

voipDspProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.18.7.1

Indexes

voipDspProfileName

Column Syntax OID

voipDspProfileName

Profile name

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.1

voipDspProfileCodec

0x01: g711a
0x02: g711mu
0x03: g723
0x04: g726x16
0x05: g726x24
0x06: g726x32
0x07: g726x40
0x08: g729ab
the value of dspProfileCodec is OCTET STRING, there are 8 Octets, each octect is
specified as 0x01, 0x03, 0x02, 0x…

OctetStringr/w

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.2

voipDspProfileDscp

Configures DSCP value carried on the RTP packets for normal voice service.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.3

voipDspProfileEchoTail

Configures echo cancellation echo tail length for normal voice service.

Enumerationr/w

Enumerated Values:

1	echotailx8ms
2	echotailx16ms
3	echotailx32ms
4	echotailx128ms

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.4

Enable/disable echo cancellation for normal voice service.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.5

voipDspProfileG711Vpi

Configures voice packet interval for G.711 codec for normal voice service.

Enumerationr/w

Enumerated Values:

1	intervalx10ms
2	intervalx20ms
3	intervalx30ms
4	intervalx40ms

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.6

voipDspProfileG723Vpi

Configures voice packet interval for G.723 codec for normal voice service.

Enumerationr/w

Enumerated Values:

1	intervalx30ms
2	intervalx60ms

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.7

voipDspProfileG726Vpi

Configures voice packet interval for G.726 codec for normal voice service.

Enumerationr/w

Enumerated Values:

1	intervalx10ms
2	intervalx20ms
3	intervalx30ms
4	intervalx40ms

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.8

voipDspProfileG729Vpi

Configures voice packet interval for G.729 codec for normal voice service.

Enumerationr/w

Enumerated Values:

1	intervalx10ms
2	intervalx20ms
3	intervalx30ms
4	intervalx40ms
5	intervalx50ms
6	intervalx60ms

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.9

voipDspProfilePbit

Configures PBIT value carried on the RTP packets for normal voice service.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.10

voipDspProfilePlayBufferMinDelay

Configures voice play out buffer depth for normal voice service.

millisecondInteger32r/w

Constraints:
range: 10-500

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.11

voipDspProfilePlayBufferMaxDelay

Configures voice play out buffer depth for normal voice service.

millisecondInteger32r/w

Constraints:
range: 10-500

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.12

voipDspProfileVadEnable

Enable/disable Voice Activity Detection for normal voice service.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.13

voipDspProfileRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.18.7.1.14

voipPortConfTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.8 · 1 row entry · 29 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voipPortConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::voipPortConfTable'

Configures VoIP port settings.

voipPortConfEntry row .1.3.6.1.4.1.890.1.5.12.49.18.8.1

Indexes

voipPortConfVbdDspProfile

Column Syntax OID

voipPortConfPortEnable

Enable/disable VoIP port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.1

voipPortConfDspProfile

Configures VoIP DSP profile.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.2

Configures VoIP DSP profile for voice band data service.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.3

voipPortConfVbdDspProfileEnable

Enable/disable VoIP DSP profile for voice band data service.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.4

voipPortConfPotsBattery

controls the battery supply of a port, low battery is for short loop, high and boost battery for long loop.

Enumerationr/w

Enumerated Values:

1	low
2	high
3	boost

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.5

voipPortConfPotsTxGain

Configures TX gain for voice band data service.

1dBInteger32r/w

Constraints:
range: -20-20

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.6

voipPortConfPotsRxGain

Configures RX gain for voice band data service.

1dBInteger32r/w

Constraints:
range: -20-20

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.7

voipPortConfVoiceTxGain

Configures TX gain for normal voice service.

1dBInteger32r/w

Constraints:
range: -20-20

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.8

voipPortConfVoiceRxGain

Configures RX gain for normal voice service.

1dBInteger32r/w

Constraints:
range: -20-20

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.9

voipPortConfPotsImpedance

Configures POTS impadence.

Enumerationr/w

Enumerated Values:

0	impedancex600ohm
1	impedancex600ohmx1000nf
2	impedancex220ohmx820ohmx120nf
3	impedancex270ohmx750ohmx150nf
4	impedancex300ohmx1000ohmx220nf
5	impedancex370ohmx620ohmx310nf
6	impedancex220ohmx680ohmx100nf
7	impedancex220ohmx820ohmx115nf
8	impedancex900ohm
9	impedancex200ohmx680ohmx100nf
10	impedancex900ohmx2160nf

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.10

voipPortConfPotsImpedanceEnable

enable(1) : use the impedance value configured in voipPortConfPotsImpedance.
disable(2): use the impedance value defined in the current selected country code.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.11

voipPortConfH248TerminateId

Configures H.248 physical termination ID.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.12

voipPortConfPmThreshProfile

Configures alarm threshold profile for PM.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.13

voipPortConfPotsTax

Configures POTS taxing mechanism.
disable: disable the tax function.

Enumerationr/w

Enumerated Values:

0	tax_disable
1	tax_12kHz
2	tax_16kHz
3	tax_reversal_12kHz
4	tax_reversal_16kHz
5	tax_reversal_steady
6	tax_reversal_pulse

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.14

voipPortConfPotsLoopCurrent

Configures the loopcurrent of a port.
Default is 18 mA.

mAInteger32r/w

Constraints:
range: 10-30

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.16

voipPortConfTel

VoIP's telephone number of the specified port.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.17

voipPortConfName

VoIP's name of the specified port.

OctetStringr/w

Constraints:
range: 0-47

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.18

voipPortConfSipCallSvcProfile

SIP call service profile name.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.20

voipPortConfHotline

Enable/disable hotline.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.22

voipPortConfHotlineTel

The telephone number of hotline for the specified port.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.23

voipPortConfHotlineTimeout

The interval before dialing the hotline number.

secondsInteger32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.24

voipPortConfAccount

The account for SIP registration of the specified port.

OctetStringr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.25

voipPortConfSipProfile

SIP profile name.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.26

voipPortConfPassword

The password for SIP registration of the specified port.
Can input with plain text or ciphertext.
plain text: Up to 31 printable characters.
ciphertext: 95 characters with special format and generated by device from pla…

OctetStringr/w

Constraints:
range: 0-95

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.27

voipPortConfPotsLoopResistance

Configures the loop resistance (2600 ohm/3200 ohm)of a port.
Default is 2600 ohm.

ohmSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.28

voipPortConfPotsCidAsType

Configures the CID AS type of a port.
Default value is DEFVAL(0).

Enumerationr/w

Enumerated Values:

0	defval
1	cid-during-ring
2	dtas-cid-before-ring
3	rpas-cid-before-ring
4	lr-dtas-cid-before-ring
5	lr-cid-before-ring
6	cid-before-ring

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.29

voipPortConfPotsCidPayloadType

Configures the CID payload type of a port.
Default value is DEFVAL(0).

Enumerationr/w

Enumerated Values:

0	defval
1	mdmf
2	sdmf
3	etsi-mdmf
4	etsi-sdmf
5	dtmf
6	uk-mdmf
7	uk-sdmf
8	japanese-mdmf

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.30

voipPortConfPotsHookFlashMaxTime

Configures hook flash detection max time threshold. This value should be larger than voipPortConfPotsHookFlashMinTime

millisecondInteger32r/w

Constraints:
range: 20-1500

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.42

voipPortConfPotsHookFlashMinTime

Configures hook flash detection min time threshold. This value should be smaller than voipPortConfPotsHookFlashMaxTime

millisecondInteger32r/w

Constraints:
range: 20-1500

.1.3.6.1.4.1.890.1.5.12.49.18.8.1.43

voipPortStatisticTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.9 · 1 row entry · 13 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voipPortStatisticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::voipPortStatisticTable'

Show the statistics for the VoIP port.

voipPortStatisticEntry row .1.3.6.1.4.1.890.1.5.12.49.18.9.1

Indexes

Column	Syntax	OID
voipPortStatisticCurrCallTime Show the statistic of current call time for the VoIP port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.1`
voipPortStatisticTotalCallTime Show the statistic of total call time for the VoIP port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.2`
voipPortStatisticCallTimes Show the statistic of call times for the VoIP port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.3`
voipPortStatisticTxRate Show the statistic of Transmission rate(bps) for the VoIP port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.4`
voipPortStatisticRxRate Show the statistic of Reception rate(bps) for the VoIP port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.5`
voipPortStatisticTxPktCnt Show the statistic of Transmission packet count for the VoIP port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.6`
voipPortStatisticRxPktCnt Show the statistic of Reception packet count for the VoIP port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.7`
voipPortStatisticTxFracLost Show the statistic of Transmission fraction lost packet percentage(10^(-6) %) for the VoIP port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.8`
voipPortStatisticRxFracLost Show the statistic of Reception fraction lost packet percentage(10^(-6) %) for the VoIP port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.9`
voipPortStatisticTxJitter Show the statistic of Transmission Jitter in 0.001 ms for the VoIP port. For example, 1 means 0.001 ms and 1000 means 1 ms.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.10`
voipPortStatisticRxJitter Show the statistic of Reception Jitter in 0.001 ms for the VoIP port. For example, 1 means 0.001 ms and 1000 means 1 ms.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.11`
voipPortStatisticTxAvgDelay Show the statistic of Transmission average delay(ms) for the VoIP port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.12`
voipPortStatisticRxAvgDelay Show the statistic of Reception average delay(ms) for the VoIP port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.18.9.1.13`

voipPortLineStatusTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.10 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voipPortLineStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::voipPortLineStatusTable'

Show line status(phone/service status) of VoIP port.

voipPortLineStatusEntry row .1.3.6.1.4.1.890.1.5.12.49.18.10.1

Indexes

voipPortLineStatusPhoneStatus

Column Syntax OID

Show the the phone status for the VoIP port.

Enumeration

Enumerated Values:

1	disabled
2	onHook
3	offHook
4	ringing
5	testing
6	powerCutDown
7	fault
8	bad
9	uninitialized
10	unknown

.1.3.6.1.4.1.890.1.5.12.49.18.10.1.1

voipPortLineStatusServiceStatus

Show the the service status for the VoIP port.

Enumeration

Enumerated Values:

1	disabled
2	outOfService
3	idle
4	waitingForDialing
5	dialingOut
6	ringing
7	conversationCaller
8	conversationCallee
9	faxOrModemCaller
10	faxOrModemCallee
11	waitingForOnHook
12	dialingTimeout
13	alertingOffHook
14	powerCutDown

.1.3.6.1.4.1.890.1.5.12.49.18.10.1.2

voipPortLineInfoTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.11 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voipPortLineInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::voipPortLineInfoTable'

Show line infomation which is used currently by the VoIP port.

voipPortLineInfoEntry row .1.3.6.1.4.1.890.1.5.12.49.18.11.1

Indexes

voipPortLineInfoRtpTxCodecType

Column Syntax OID

Show line information of transmission codec which is used currently by the VoIP port.

Enumeration

Enumerated Values:

1	g711a
2	g711mu
3	g723
4	g726x16
5	g726x24
6	g726x32
7	g726x40
8	g729ab
9	t38
10	g711aVbd
11	g711muVbd

.1.3.6.1.4.1.890.1.5.12.49.18.11.1.1

voipPortLineInfoRtpRxCodecType

Show line information of reception codec which is used currently by the VoIP port.

Enumeration

Enumerated Values:

1	g711a
2	g711mu
3	g723
4	g726x16
5	g726x24
6	g726x32
7	g726x40
8	g729ab
9	t38
10	g711aVbd
11	g711muVbd

.1.3.6.1.4.1.890.1.5.12.49.18.11.1.2

voipPortLineInfoRtpTxPt

Show line information of transmission RTP payload type which is used currently by the VoIP port.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.11.1.3

voipPortLineInfoRtpRxPt

Show line information of reception RTP payload type which is used currently by the VoIP port.

voipPortLineInfoRtpLocalIp

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.11.1.4

Show line information of RTP local ip address which is used currently by the VoIP port.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.18.11.1.5

voipPortLineInfoRtpRemoteIp

Show line information of RTP remote ip address which is used currently by the VoIP port.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.890.1.5.12.49.18.11.1.6

voipPortLineInfoRtpLocalPort

Show line information of RTP local port which is used currently by the VoIP port.

voipPortLineInfoRtpRemotePort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.11.1.7

Show line information of RTP remote port which is used currently by the VoIP port.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.11.1.8

sipProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.20.2 · 1 row entry · 27 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sipProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::sipProfileTable'

This table includes SIP protocol related configuration.

sipProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.18.20.2.1

An entry in sipProfileTable.

Indexes

sipProfileName

Column Syntax OID

sipProfileName

This object is used by the SIP profile table in order to identify a row of this table.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.1

sipProfileSipSvr

IP used for SIP registration or SIP domain name.

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.2

sipProfileRegSvr

Registration server IP or registration server domain name.

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.3

sipProfileProxySvr

Proxy server IP or proxy server doamin name.

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.4

sipProfileSipPort

SIP UA port number.

Integer32r/w

Constraints:
range: 1025-65535

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.5

sipProfileRegSvrPort

Registration server port number.

Integer32r/w

Constraints:
range: 1025-65535

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.6

sipProfileProxySvrPort

Proxy server port number.

Integer32r/w

Constraints:
range: 1025-65535

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.7

sipProfileUriType

Configures the type of uri.
sip(1),
tel(2)

Enumerationr/w

Enumerated Values:

1	use_sip_uri
2	use_tel_uri

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.8

sipProfileDscp

DSCP for SIP and RTP packet.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.10

sipProfileKeepAlive

Enable or Disable keep alive feature of SIP

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.11

sipProfilePrack

Enable or Disable the Provisional ACK feature of SIP

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.13

sipProfileRowStatus

This object is used to create a new row or delete an existing row in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.14

sipProfileRtpStartPort

Start of RTP port number. This MIB object is supported by R5.05 and later versions.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.20

sipProfileRtpEndPort

End of RTP port number. This MIB object is supported by R5.05 and later versions.

sipProfileKeepAliveTimeOut

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.21

sipProfileSwitchType

Configures the type of switch.

Enumerationr/w

Enumerated Values:

1	nsn
2	alu
3	hua
4	isk
5	zte

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.27

Keep alive timeout of SIP,
<timeout>: session expiration time in seconds, 90~65535

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.28

sipProfileFailRetry

<FailRetry>: Register fail retry interval time in seconds, 120~900.

Integer32r/w

Constraints:
range: 120-900

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.29

sipProfileRegTime

Registration expiration time in seconds, 120~65535.

secondsInteger32r/w

Constraints:
range: 120-65535

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.30

sipProfileRegistration

Enable or Disable registration feature of SIP

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.31

sipProfileDnsSvr

Enable or Disable the server locating feature.
on(1),
off(2)

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.32

sipProfileDualSvr

Enable or Disable the dual server feature.
on(1),
off(2)

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.33

sipProfileSipSvr2

IP used for secondary SIP registration or secondary SIP domain name.

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.34

sipProfileRegSvr2

Secondary registration server IP or secondary registration server domain name.

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.35

sipProfileProxySvr2

Secondary proxy server IP or secondary proxy server doamin name.

sipCallSvcProfileDialPlanOn

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.36

sipProfileSipPort2

Secondary SIP UA port number.

Integer32r/w

Constraints:
range: 1025-65535

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.37

sipProfileRegSvrPort2

Secondary registration server port number.

Integer32r/w

Constraints:
range: 1025-65535

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.38

sipProfileProxySvrPort2

Secondary proxy server port number.

Integer32r/w

Constraints:
range: 1025-65535

.1.3.6.1.4.1.890.1.5.12.49.18.20.2.1.39

sipCallSvcProfileTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.20.4 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sipCallSvcProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::sipCallSvcProfileTable'

This table includes SIP call service related configuration.

sipCallSvcProfileEntry row .1.3.6.1.4.1.890.1.5.12.49.18.20.4.1

An entry in sipCallSvcProfileTable.

Indexes

sipCallSvcProfileName

Column Syntax OID

sipCallSvcProfileName

This object is used by the SIP call service profile table in order to identify a row of this table.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.1

Enable or Disable the dialplan feature.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.4

sipCallSvcProfileDialPlanCc

Country code, only digit 0..9 are allowed.

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.5

sipCallSvcProfileDialPlanNdc

National destination code, only digit 0..9 are allowed.

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.6

sipCallSvcProfileDialPlanTable

Dial plan table name.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.7

sipCallSvcProfileStateMask

Bit 3 callwait : call waiting
Bit 5 calltransfer : call transfer
Bit 6 clip : caller line identification presentation (Caller ID)
Bit 7 clir : caller line identification restriction
Bit 8 dnd : do not disturb

sipCallSvcProfileDtmfRfc2833PayloadType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.8

sipCallSvcProfileDtmf

dtmf bypass : bypass DTMF tone
dtmf rfc2833 : DTMF tone relay according to RFC2833
dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload
dtmf sipinfo : DTMF tone relay by SIP INFO signal message
dt…

Enumerationr/w

Enumerated Values:

1	bypass
2	rfc2833
3	sipinfo
4	rfc2833like
5	plaintext

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.9

Rfc2833 payload type, if only set Dtmf as rfc2833, the default value is 101.

Integer32r/w

Constraints:
range: 96-127

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.10

sipCallSvcProfileFax

fax g711 : FAX service pass through by ITU-T G.711
fax t38 : FAX service by ITU-T T.38

Enumerationr/w

Enumerated Values:

1	g711a
2	t38
3	g711mu

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.11

sipCallSvcProfileRowStatus

This object is used to create a new row or delete an existing row in the table.

sipCallSvcProfileKeypattern

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.12

Key pattern table name.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.13

sipCallSvcProfileFlash

flash invite : send SIP INVITE message
flash rfc2833 : flash relay according to RFC2833
flash rfc2833like : flash relay by SIP INFO message, but RFC2833 payload
flash sipinfo1 : flash relay by SIP INFO signal=16 message…

Enumerationr/w

Enumerated Values:

1	invite
2	rfc2833
3	rfc2833like
4	sipinfo1
5	sipinfo2
6	sipinfo3
7	sipinfo4
8	sipinfo5
9	sipinfo6

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.15

sipCallSvcProfileFlashPattern

Flash pattern name.

sipCallSvcProfileFirstDigit

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.16

first digit timeout. This MIB object is supported by R5.05 and later versions.

sipCallSvcProfileInterDigit

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.18

inter digit timeout. This MIB object is supported by R5.05 and later versions.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.19

sipCallSvcProfileCentrex

Enable or Disable Centrex

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.890.1.5.12.49.18.20.4.1.20

sipDialPlanTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.20.18 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sipDialPlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::sipDialPlanTable'

Configure specified dial plan table.

sipDialPlanEntry row .1.3.6.1.4.1.890.1.5.12.49.18.20.18.1

An entry of sipDialPlanTable.

Indexes

sipDialPlanName

Column Syntax OID

sipDialPlanName

Dial plan table name.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.20.18.1.1

sipDialPlanRowStatus

This object is used to create a new entry or delete an existing entry in this table.

sipDialPlanName sipDialPlanIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.18.20.18.1.2

sipDialPlanContentTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.20.19 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sipDialPlanContentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::sipDialPlanContentTable'

Configure dial plan entry of specified index in specified payphone charging table.

sipDialPlanContentEntry row .1.3.6.1.4.1.890.1.5.12.49.18.20.19.1

An entry of sipDialPlanContentTable.

Indexes

Column	Syntax	OID
sipDialPlanIndex Index of dial plan.	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.890.1.5.12.49.18.20.19.1.1`
sipDialPlanPattern Allow digit, '*', and '#' characters and meaning characters that include 'x', '.', '\|' and range format characters that include '~', ',' and parenthesis '(', ')' and brackets '[', ']' and at most one parenthesis pair an…	OctetStringr/w Constraints: `range: 1-47`	`.1.3.6.1.4.1.890.1.5.12.49.18.20.19.1.2`
sipDialPlanRule Allowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesis pair, and 'deny' stand for the pattern specified is not al…	OctetStringr/w Constraints: `range: 1-47`	`.1.3.6.1.4.1.890.1.5.12.49.18.20.19.1.3`

sipKeyPatternTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.20.20 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sipKeyPatternTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::sipKeyPatternTable'

Configure specified key pattern table.

sipKeyPatternEntry row .1.3.6.1.4.1.890.1.5.12.49.18.20.20.1

An entry of sipKeyPatternTable.

Indexes

sipKeyPatternName

Column Syntax OID

sipKeyPatternName

Key pattern table name.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.890.1.5.12.49.18.20.20.1.1

sipKeyPatternRowStatus

This object is used to create a new entry or delete an existing entry in this table.

sipKeyPatternName sipKeyPatternServiceType

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.18.20.20.1.2

sipKeyPatternContentTable

table

.1.3.6.1.4.1.890.1.5.12.49.18.20.21 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sipKeyPatternContentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::sipKeyPatternContentTable'

Configure key pattern related configuration.

sipKeyPatternContentEntry row .1.3.6.1.4.1.890.1.5.12.49.18.20.21.1

An entry of sipKeyPatternContentTable.

Indexes

Column Syntax OID

sipKeyPatternServiceType

Key pattern service type.

Enumeration

Enumerated Values:

8	clir
9	dndoff
10	dndon

.1.3.6.1.4.1.890.1.5.12.49.18.20.21.1.1

sipKeyPatternPattern

Allowed characters are 0~9, *, and #.
Note: Pattern of callwaitdisconn, callwaitonhold and callwaitreject
service types only allow 1 character

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.890.1.5.12.49.18.20.21.1.2

cpuUtilizationTable

table

.1.3.6.1.4.1.890.1.5.12.49.20.5 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cpuUtilizationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::cpuUtilizationTable'

A table that contains CPU utilization information.

cpuUtilizationEntry row .1.3.6.1.4.1.890.1.5.12.49.20.5.1

An entry of cpuUtilizationTable.

Indexes

cpuSecondIndex

Column	Syntax	OID
cpuSecondIndex The past second index of the CPU.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.20.5.1.1`
cpuValue The CPU utilization. The cpuValue with cpuSecondIndex = 0 is current cpu utilization. Walk for all cpuValue, their value will be updated immediately. Get for cpuValue with cpuSecondIndex = 0, its value will be updated i…	0.01 PercentSNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.20.5.1.2`

gePmCurr15minTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.1 · 1 row entry · 21 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk gePmCurr15minTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::gePmCurr15minTable'

A list of Ethernet statistics PM entries.

gePmCurr15minEntry row .1.3.6.1.4.1.890.1.5.12.49.22.1.1

A collection of statistics PM kept for a particular
Ethernet interface.

Indexes

RFC1213-MIBifIndex gePmHist15minIndex

Column	Syntax	OID
gePmCurr15minElapsed The seconds elapsed in the current 15 minutes interval	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.1`
gePmCurr15minTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.2`
gePmCurr15minTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.3`
gePmCurr15minTxBroadcastPkts The total number of broadcast packets transmitted. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.4`
gePmCurr15minTxMulticastPkts The total number of multicast packets transmitted. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.5`
gePmCurr15minRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.6`
gePmCurr15minRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.7`
gePmCurr15minRxBroadcastPkts The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.8`
gePmCurr15minRxMulticastPkts The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.9`
gePmCurr15minRxCRCAlignErrors The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral nu…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.10`
gePmCurr15minRxUndersizePkts The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.11`
gePmCurr15minRxOversizePkts The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.12`
gePmCurr15minRxFragments The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.13`
gePmCurr15minCollisions The best estimate of the total number of collisions on this Ethernet segment.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.14`
gePmCurr15minPkts64Octets The total number of packets (including bad packets) transmitted and received that were 64 octets in length (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.15`
gePmCurr15minPkts65to127Octets The total number of packets (including bad packets) transmitted and received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.16`
gePmCurr15minPkts128to255Octets The total number of packets (including bad packets) transmitted and received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.17`
gePmCurr15minPkts256to511Octets The total number of packets (including bad packets) transmitted and received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.18`
gePmCurr15minPkts512to1023Octets The total number of packets (including bad packets) transmitted and received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.19`
gePmCurr15minPkts1024to1518Octets The total number of packets (including bad packets) transmitted and received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.20`
gePmCurr15minPkts1519to1522Octets The total number of packets (including bad packets) transmitted and received that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.1.1.21`

gePmHist15minTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.2 · 1 row entry · 24 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk gePmHist15minTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::gePmHist15minTable'

A list of Ethernet statistics historical 15-min PM entries.

gePmHist15minEntry row .1.3.6.1.4.1.890.1.5.12.49.22.2.1

A collection of statistics historical 15-min PM kept for a particular
Ethernet interface.

Indexes

Column	Syntax	OID
gePmHist15minIndex The index of 15-min historical record	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.1`
gePmHist15minElapsed The seconds elapsed in the historical 15-min interval	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.2`
gePmHist15minTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) in historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.3`
gePmHist15minTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted in historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.4`
gePmHist15minTxBroadcastPkts The total number of broadcast packets transmitted. Note that this does not include multicast packets in historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.5`
gePmHist15minTxMulticastPkts The total number of multicast packets transmitted in historical 15-min interval. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.6`
gePmHist15minRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.7`
gePmHist15minRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received in historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.8`
gePmHist15minRxBroadcastPkts The total number of good packets received that were directed to the broadcast address in historical 15-min interval. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.9`
gePmHist15minRxMulticastPkts The total number of good packets received in historical 15-min interval that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.10`
gePmHist15minRxCRCAlignErrors The total number of packets received in historical 15-min interval that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequ…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.11`
gePmHist15minRxUndersizePkts The total number of packets received in historical 15-min interval that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.12`
gePmHist15minRxOversizePkts The total number of packets received in historical 15-min interval that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.13`
gePmHist15minRxFragments The total number of packets received in historical 15-min interval that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integr…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.14`
gePmHist15minCollisions The best estimate of the total number of collisions on this Ethernet segment in historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.15`
gePmHist15minPkts64Octets The total number of packets (including bad packets) received in historical 15-min interval that were 64 octets in length (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.16`
gePmHist15minPkts65to127Octets The total number of packets (including bad packets) received in historical 15-min interval that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.17`
gePmHist15minPkts128to255Octets The total number of packets (including bad packets) received in historical 15-min interval that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.18`
gePmHist15minPkts256to511Octets The total number of packets (including bad packets) received in historical 15-min interval that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.19`
gePmHist15minPkts512to1023Octets The total number of packets (including bad packets) received in historical 15-min interval that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.20`
gePmHist15minPkts1024to1518Octets The total number of packets (including bad packets) received in historical 15-min interval that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.21`
gePmHist15minPkts1519to1522Octets The total number of packets (including bad packets) received in historical 15-min interval that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.22`
gePmHist15minStartTime The start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.23`
gePmHist15minEndTime The end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.2.1.24`

gePmCurr1dayTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.3 · 1 row entry · 21 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk gePmCurr1dayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::gePmCurr1dayTable'

A list of Ethernet statistics PM entries.

gePmCurr1dayEntry row .1.3.6.1.4.1.890.1.5.12.49.22.3.1

A collection of statistics PM kept for a particular
Ethernet interface.

Indexes

RFC1213-MIBifIndex gePmHist1dayIndex

Column	Syntax	OID
gePmCurr1dayElapsed The seconds elapsed in the current 1 day interval	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.1`
gePmCurr1dayTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.2`
gePmCurr1dayTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.3`
gePmCurr1dayTxBroadcastPkts The total number of broadcast packets transmitted. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.4`
gePmCurr1dayTxMulticastPkts The total number of multicast packets transmitted. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.5`
gePmCurr1dayRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.6`
gePmCurr1dayRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.7`
gePmCurr1dayRxBroadcastPkts The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.8`
gePmCurr1dayRxMulticastPkts The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.9`
gePmCurr1dayRxCRCAlignErrors The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral nu…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.10`
gePmCurr1dayRxUndersizePkts The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.11`
gePmCurr1dayRxOversizePkts The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.12`
gePmCurr1dayRxFragments The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.13`
gePmCurr1dayCollisions The best estimate of the total number of collisions on this Ethernet segment.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.14`
gePmCurr1dayPkts64Octets The total number of packets (including bad packets) transmitted and received that were 64 octets in length (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.15`
gePmCurr1dayPkts65to127Octets The total number of packets (including bad packets) transmitted and received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.16`
gePmCurr1dayPkts128to255Octets The total number of packets (including bad packets) transmitted and received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.17`
gePmCurr1dayPkts256to511Octets The total number of packets (including bad packets) transmitted and received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.18`
gePmCurr1dayPkts512to1023Octets The total number of packets (including bad packets) transmitted and received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.19`
gePmCurr1dayPkts1024to1518Octets The total number of packets (including bad packets) transmitted and received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.20`
gePmCurr1dayPkts1519to1522Octets The total number of packets (including bad packets) transmitted and received that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.3.1.21`

gePmHist1dayTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.4 · 1 row entry · 23 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk gePmHist1dayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::gePmHist1dayTable'

A list of Ethernet statistics historical 1 day PM entries.

gePmHist1dayEntry row .1.3.6.1.4.1.890.1.5.12.49.22.4.1

A collection of statistics historical 1 day PM kept for a particular
Ethernet interface.

Indexes

Column	Syntax	OID
gePmHist1dayIndex The index of 1 day historical record	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.1`
gePmHist1dayStartTime The start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.2`
gePmHist1dayEndTime The end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.3`
gePmHist1dayTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) in historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.4`
gePmHist1dayTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted in historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.5`
gePmHist1dayTxBroadcastPkts The total number of broadcast packets transmitted. Note that this does not include multicast packets in historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.6`
gePmHist1dayTxMulticastPkts The total number of multicast packets transmitted in historical 1 day interval. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.7`
gePmHist1dayRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in historical 1day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.8`
gePmHist1dayRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received in historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.9`
gePmHist1dayRxBroadcastPkts The total number of good packets received that were directed to the broadcast address in historical 1 day interval. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.10`
gePmHist1dayRxMulticastPkts The total number of good packets received in historical 1 day interval that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.11`
gePmHist1dayRxCRCAlignErrors The total number of packets received in historical 1 day interval that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Seque…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.12`
gePmHist1dayRxUndersizePkts The total number of packets received in historical 1 day interval that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.13`
gePmHist1dayRxOversizePkts The total number of packets received in historical 1 day interval that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.14`
gePmHist1dayRxFragments The total number of packets received in historical 1 day interval that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integra…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.15`
gePmHist1dayCollisions The best estimate of the total number of collisions on this Ethernet segment in historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.16`
gePmHist1dayPkts64Octets The total number of packets (including bad packets) received in historical 1day interval that were 64 octets in length (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.17`
gePmHist1dayPkts65to127Octets The total number of packets (including bad packets) received in historical 1 day interval that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.18`
gePmHist1dayPkts128to255Octets The total number of packets (including bad packets) received in historical 1 day interval that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.19`
gePmHist1dayPkts256to511Octets The total number of packets (including bad packets) received in historical 1 day interval that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.20`
gePmHist1dayPkts512to1023Octets The total number of packets (including bad packets) received in historical 1 day interval that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.21`
gePmHist1dayPkts1024to1518Octets The total number of packets (including bad packets) received in historical 1 day interval that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.22`
gePmHist1dayPkts1519to1522Octets The total number of packets (including bad packets) received in historical 1 day interval that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.4.1.23`

gePmThreshProfTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.5 · 1 row entry · 22 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk gePmThreshProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::gePmThreshProfTable'

A list of Ethernet statistics PM threshold profile.

gePmThreshProfEntry row .1.3.6.1.4.1.890.1.5.12.49.22.5.1

Statistics PM threshold kept for a particular
Ethernet interface.

Indexes

gePmThreshProfName

Column Syntax OID

gePmThreshProfName

Threshold of the total number of octets of data (including
those in bad packets) transmitted on the
network (excluding framing bits but including
FCS octets).

gePmThreshProfTxBroadcastPkts

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.1

gePmThreshProfTxOctets

Threshold of the total number of octets of data (including
those in bad packets) transmitted on the
network (excluding framing bits but including
FCS octets).
Threshold should be a value in the range of 64 bit unsigned …

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.2

gePmThreshProfTxPkts

Threshold of the total number of packets (including bad packets,
broadcast packets, and multicast packets) transmitted.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Ple…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.3

Threshold of the total number of broadcast packets transmitted. Note that
this does not include multicast packets.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please s…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.4

gePmThreshProfTxMulticastPkts

Threshold of the total number of multicast packets transmitted. Note that this
number does not include packets directed to the
broadcast address.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ …

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.5

gePmThreshProfRxOctets

Threshold of the total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets).
Threshold should be a value in the range of 64 bit unsigned int…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.6

gePmThreshProfRxPkts

Threshold of the total number of packets (including bad packets,
broadcast packets, and multicast packets) received.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.7

gePmThreshProfRxBroadcastPkts

Threshold of the total number of good packets received that were
directed to the broadcast address. Note that this
does not include multicast packets.
Threshold should be a value in the range of 64 bit unsigned integer…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.8

gePmThreshProfRxMulticastPkts

Threshold of the total number of good packets received that were
directed to a multicast address. Note that this
number does not include packets directed to the
broadcast address.
Threshold should be a value in the ran…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.9

gePmThreshProfRxCRCAlignErrors

Threshold of the total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but but had either a bad
Frame Check Sequence (FCS) with a…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.10

gePmThreshProfRxUndersizePkts

Threshold of the total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
Threshold should be a value in the range of 64 bit …

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.11

gePmThreshProfRxOversizePkts

Threshold of the total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.
Threshold should be a value in the range of 64 bit u…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.12

gePmThreshProfRxFragments

Threshold of the total number of packets received that were less
than 64 octets in length (excluding framing bits but
including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of
octe…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.13

gePmThreshProfCollisions

Threshold of the best estimate of the total number of collisions
on this Ethernet segment.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.14

gePmThreshProfPkts64Octets

Threshold of the total number of packets (including bad
packets) transmitted and received that were 64 octets in length
(excluding framing bits but including FCS octets).
Threshold should be a value in the range of 64 b…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.15

gePmThreshProfPkts65to127Octets

Threshold of the total number of packets (including bad
packets) transmitted and received that were between
65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).
Threshold should be a …

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.16

gePmThreshProfPkts128to255Octets

Threshold of the total number of packets (including bad
packets) transmitted and received that were between
128 and 255 octets in length inclusive
(excluding framing bits but including FCS octets).
Threshold should be a…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.17

gePmThreshProfPkts256to511Octets

Threshold of the total number of packets (including bad
packets) transmitted and received that were between
256 and 511 octets in length inclusive
(excluding framing bits but including FCS octets).
Threshold should be a…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.18

gePmThreshProfPkts512to1023Octets

Threshold of the total number of packets (including bad
packets) transmitted and received that were between
512 and 1023 octets in length inclusive
(excluding framing bits but including FCS octets).
Threshold should be …

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.19

gePmThreshProfPkts1024to1518Octets

Threshold of the total number of packets (including bad
packets) transmitted and received that were between
1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).
Threshold should be…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.20

gePmThreshProfPkts1519to1522Octets

Threshold of the total number of packets (including bad
packets) transmitted and received that were between
1519 and 1522 octets in length inclusive
(excluding framing bits but including FCS octets).
Threshold should be…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.21

gePmThreshProfRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.22.5.1.22

fxsPmCurr15minTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.11 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fxsPmCurr15minTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fxsPmCurr15minTable'

A list of voip FXS statistics PM entries.

fxsPmCurr15minEntry row .1.3.6.1.4.1.890.1.5.12.49.22.11.1

A collection of statistics PM kept for a particular
voip FXS interface.

Indexes

RFC1213-MIBifIndex fxsPmHist15minIndex

Column	Syntax	OID
fxsPmCurr15minElapsed The seconds elapsed in the current 15 minutes interval	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.11.1.1`
fxsPmCurr15minRtpElapsedTime The seconds when RTP session is created for a FXS port.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.11.1.2`
fxsPmCurr15minRtpTxBytes How many bytes of RTP packets are transmitted for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.11.1.3`
fxsPmCurr15minRtpRxBytes How many bytes of RTP packets are received for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.11.1.4`
fxsPmCurr15minRtpTxPackets How many RTP packets are transmitted for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.11.1.5`
fxsPmCurr15minRtpRxPackets How many RTP packets are received for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.11.1.6`
fxsPmCurr15minRtpTxLostPackets How many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.11.1.7`
fxsPmCurr15minRtpRxLostPackets How many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.11.1.8`

fxsPmHist15minTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.12 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fxsPmHist15minTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fxsPmHist15minTable'

A list of voip FXS statistics historical 15-min PM entries.

fxsPmHist15minEntry row .1.3.6.1.4.1.890.1.5.12.49.22.12.1

A collection of statistics historical 15-min PM kept for a particular
voip FXS interface.

Indexes

Column	Syntax	OID
fxsPmHist15minIndex The index of 15-min historical record	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.1`
fxsPmHist15minStartTime The start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.2`
fxsPmHist15minEndTime The end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.3`
fxsPmHist15minRtpElapsedTime The seconds when RTP session is created for a FXS port in the historical 15-min interval.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.4`
fxsPmHist15minRtpTxBytes How many bytes of RTP packets are transmitted for a FXS port in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.5`
fxsPmHist15minRtpRxBytes How many bytes of RTP packets are received for a FXS port in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.6`
fxsPmHist15minRtpTxPackets How many RTP packets are transmitted for a FXS port in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.7`
fxsPmHist15minRtpRxPackets How many RTP packets are received for a FXS port in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.8`
fxsPmHist15minRtpTxLostPackets How many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.9`
fxsPmHist15minRtpRxLostPackets How many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.12.1.10`

fxsPmCurr1dayTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.13 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fxsPmCurr1dayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fxsPmCurr1dayTable'

A list of voip FXS statistics PM entries.

fxsPmCurr1dayEntry row .1.3.6.1.4.1.890.1.5.12.49.22.13.1

A collection of statistics PM kept for a particular
voip FXS interface.

Indexes

RFC1213-MIBifIndex fxsPmHist1dayIndex

Column	Syntax	OID
fxsPmCurr1dayElapsed The seconds elapsed in the current 1 day interval	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.13.1.1`
fxsPmCurr1dayRtpElapsedTime The seconds when RTP session is created for a FXS port.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.13.1.2`
fxsPmCurr1dayRtpTxBytes How many bytes of RTP packets are transmitted for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.13.1.3`
fxsPmCurr1dayRtpRxBytes How many bytes of RTP packets are received for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.13.1.4`
fxsPmCurr1dayRtpTxPackets How many RTP packets are transmitted for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.13.1.5`
fxsPmCurr1dayRtpRxPackets How many RTP packets are received for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.13.1.6`
fxsPmCurr1dayRtpTxLostPackets How many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.13.1.7`
fxsPmCurr1dayRtpRxLostPackets How many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.13.1.8`

fxsPmHist1dayTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.14 · 1 row entry · 10 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fxsPmHist1dayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fxsPmHist1dayTable'

A list of voip FXS statistics historical 1 day PM entries.

fxsPmHist1dayEntry row .1.3.6.1.4.1.890.1.5.12.49.22.14.1

A collection of statistics historical 1 day PM kept for a particular
voip FXS interface.

Indexes

Column	Syntax	OID
fxsPmHist1dayIndex The index of 15-min historical record	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.1`
fxsPmHist1dayStartTime The start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.2`
fxsPmHist1dayEndTime The end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.3`
fxsPmHist1dayRtpElapsedTime The seconds when RTP session is created for a FXS port in the historical 1 day interval.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.4`
fxsPmHist1dayRtpTxBytes How many bytes of RTP packets are transmitted for a FXS port in the historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.5`
fxsPmHist1dayRtpRxBytes How many bytes of RTP packets are received for a FXS port in the historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.6`
fxsPmHist1dayRtpTxPackets How many RTP packets are transmitted for a FXS port in the historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.7`
fxsPmHist1dayRtpRxPackets How many RTP packets are received for a FXS port in the historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.8`
fxsPmHist1dayRtpTxLostPackets How many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port in the historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.9`
fxsPmHist1dayRtpRxLostPackets How many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port in the historical 1 day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.14.1.10`

fxsPmThreshProfTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.15 · 1 row entry · 9 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fxsPmThreshProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fxsPmThreshProfTable'

A list of voip FXS statistics PM threshold profile.

fxsPmThreshProfEntry row .1.3.6.1.4.1.890.1.5.12.49.22.15.1

Statistics PM threshold kept for a particular
voip FXS interface.

Indexes

fxsPmThreshProfName

Column Syntax OID

fxsPmThreshProfName

Profile name of the entry.

fxsPmThreshProfRtpElapsedTime

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.1

Threshold of the total seconds when RTP session is created for a FXS port.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.2

fxsPmThreshProfRtpTxBytes

Threshold of the total number bytes of RTP transmitted for a FXS port.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.3

fxsPmThreshProfRtpRxBytes

Threshold of the total number bytes of RTP received for a FXS port.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.4

fxsPmThreshProfRtpTxPackets

Threshold of the total number of RTP packets transmitted for a FXS port.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.5

fxsPmThreshProfRtpRxPackets

Threshold of the total number of RTP packets received for a FXS port.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.6

fxsPmThreshProfRtpTxLostPackets

Threshold of the total number of RTP packets that are transmitted by
local peer but not received by remote peer for a FXS port.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 184467440737095516…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.7

fxsPmThreshProfRtpRxLostPackets

Threshold of the total number of RTP packets that are transmitted by
remote peer but not received by local peer for a FXS port.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 184467440737095516…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.8

fxsPmThreshProfRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.22.15.1.9

gePmCurrStatisticTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.16 · 1 row entry · 21 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk gePmCurrStatisticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::gePmCurrStatisticTable'

A list of Ethernet current statistics PM entries.

gePmCurrStatisticEntry row .1.3.6.1.4.1.890.1.5.12.49.22.16.1

A collection of current statistics PM kept for a particular
Ethernet interface.

Indexes

Column	Syntax	OID
gePmCurrStatisticTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.1`
gePmCurrStatisticTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.2`
gePmCurrStatisticTxBroadcastPkts The total number of broadcast packets transmitted. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.3`
gePmCurrStatisticTxMulticastPkts The total number of multicast packets transmitted. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.4`
gePmCurrStatisticRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.5`
gePmCurrStatisticRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.6`
gePmCurrStatisticRxBroadcastPkts The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.7`
gePmCurrStatisticRxMulticastPkts The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.8`
gePmCurrStatisticRxCRCAlignErrors The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral nu…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.9`
gePmCurrStatisticRxUndersizePkts The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.10`
gePmCurrStatisticRxOversizePkts The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.11`
gePmCurrStatisticRxFragments The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.12`
gePmCurrStatisticCollisions The best estimate of the total number of collisions on this Ethernet segment.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.13`
gePmCurrStatisticPkts64Octets The total number of packets (including bad packets) transmitted and received that were 64 octets in length (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.14`
gePmCurrStatisticPkts65to127Octets The total number of packets (including bad packets) transmitted and received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.15`
gePmCurrStatisticPkts128to255Octets The total number of packets (including bad packets) transmitted and received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.16`
gePmCurrStatisticPkts256to511Octets The total number of packets (including bad packets) transmitted and received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.17`
gePmCurrStatisticPkts512to1023Octets The total number of packets (including bad packets) transmitted and received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.18`
gePmCurrStatisticPkts1024to1518Octets The total number of packets (including bad packets) transmitted and received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.19`
gePmCurrStatisticPkts1519to1522Octets The total number of packets (including bad packets) transmitted and received that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.20`
gePmCurrStatisticTimestamp The time when the counters of port updated.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.22.16.1.21`

fxsPmCurrStatisticTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.18 · 1 row entry · 8 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fxsPmCurrStatisticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::fxsPmCurrStatisticTable'

A list of voip FXS statistics PM entries.

fxsPmCurrStatisticEntry row .1.3.6.1.4.1.890.1.5.12.49.22.18.1

A collection of statistics PM kept for a particular
voip FXS interface.

Indexes

Column	Syntax	OID
fxsPmCurrStatisticRtpElapsedTime The seconds when RTP session is created for a FXS port.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.18.1.1`
fxsPmCurrStatisticRtpTxBytes How many bytes of RTP packets are transmitted for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.18.1.2`
fxsPmCurrStatisticRtpRxBytes How many bytes of RTP packets are received for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.18.1.3`
fxsPmCurrStatisticRtpTxPackets How many RTP packets are transmitted for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.18.1.4`
fxsPmCurrStatisticRtpRxPackets How many RTP packets are received for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.18.1.5`
fxsPmCurrStatisticRtpTxLostPackets How many RTP packets that are transmitted by local peer but not received by remote peer for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.18.1.6`
fxsPmCurrStatisticRtpRxLostPackets How many RTP packets that are transmitted by remote peer but not received by local peer for a FXS port.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.18.1.7`
fxsPmCurrStatisticTimestamp The time when the counters of port updated.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.22.18.1.8`

dslPmCurr15minTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.19 · 1 row entry · 13 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslPmCurr15minTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslPmCurr15minTable'

A list of dsl statistics PM entries.

dslPmCurr15minEntry row .1.3.6.1.4.1.890.1.5.12.49.22.19.1

A collection of statistics PM kept for a particular
Ethernet interface.

Indexes

RFC1213-MIBifIndex dslPmHist15minIndex

Column	Syntax	OID
dslPmCurr15minElapsed The seconds elapsed in the current 15 minutes interval	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.1`
dslPmCurr15minTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.2`
dslPmCurr15minTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.3`
dslPmCurr15minTxUnicastPkts The total number of unicast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.4`
dslPmCurr15minTxBroadcastPkts The total number of broadcast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.5`
dslPmCurr15minTxMulticastPkts The total number of multicast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.6`
dslPmCurr15minTxDiscardPkts The total number of discard packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.7`
dslPmCurr15minRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.8`
dslPmCurr15minRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.9`
dslPmCurr15minRxUnicastPkts The total number of unicast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.10`
dslPmCurr15minRxBroadcastPkts The total number of broadcast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.11`
dslPmCurr15minRxMulticastPkts The total number of multicast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.12`
dslPmCurr15minRxDiscardPkts The total number of discard packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.19.1.13`

dslPmHist15minTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.20 · 1 row entry · 16 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslPmHist15minTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslPmHist15minTable'

A list of DSL statistics historical 15-min PM entries.

dslPmHist15minEntry row .1.3.6.1.4.1.890.1.5.12.49.22.20.1

A collection of statistics historical 15-min PM kept for a particular
DSL interface.

Indexes

Column	Syntax	OID
dslPmHist15minIndex The index of 15-min historical record	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.1`
dslPmHist15minElapsed The seconds elapsed in the historical 15-min interval	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.2`
dslPmHist15minStartTime The start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.3`
dslPmHist15minEndTime The end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.4`
dslPmHist15minTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.5`
dslPmHist15minTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.6`
dslPmHist15minTxUnicastPkts The total number of unicast packets transmitted in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.7`
dslPmHist15minTxBroadcastPkts The total number of broadcast packets transmitted in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.8`
dslPmHist15minTxMulticastPkts The total number of multicast packets transmitted in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.9`
dslPmHist15minTxDiscardPkts The total number of discard packets transmitted in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.10`
dslPmHist15minRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.11`
dslPmHist15minRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.12`
dslPmHist15minRxUnicastPkts The total number of unicast packets received in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.13`
dslPmHist15minRxBroadcastPkts The total number of broadcast packets received in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.14`
dslPmHist15minRxMulticastPkts The total number of multicast packets received in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.15`
dslPmHist15minRxDiscardPkts The total number of discard packets received in the historical 15-min interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.20.1.16`

dslPmCurr1dayTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.21 · 1 row entry · 13 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslPmCurr1dayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslPmCurr1dayTable'

A list of dsl statistics PM entries.

dslPmCurr1dayEntry row .1.3.6.1.4.1.890.1.5.12.49.22.21.1

A collection of statistics PM kept for a particular
Ethernet interface.

Indexes

RFC1213-MIBifIndex dslPmHist1dayIndex

Column	Syntax	OID
dslPmCurr1dayElapsed The seconds elapsed in the current 15 minutes interval	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.1`
dslPmCurr1dayTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.2`
dslPmCurr1dayTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.3`
dslPmCurr1dayTxUnicastPkts The total number of unicast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.4`
dslPmCurr1dayTxBroadcastPkts The total number of broadcast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.5`
dslPmCurr1dayTxMulticastPkts The total number of multicast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.6`
dslPmCurr1dayTxDiscardPkts The total number of discard packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.7`
dslPmCurr1dayRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.8`
dslPmCurr1dayRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.9`
dslPmCurr1dayRxUnicastPkts The total number of unicast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.10`
dslPmCurr1dayRxBroadcastPkts The total number of broadcast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.11`
dslPmCurr1dayRxMulticastPkts The total number of multicast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.12`
dslPmCurr1dayRxDiscardPkts The total number of discard packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.21.1.13`

dslPmHist1dayTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.22 · 1 row entry · 15 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslPmHist1dayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslPmHist1dayTable'

A list of DSL statistics historical 1-day PM entries.

dslPmHist1dayEntry row .1.3.6.1.4.1.890.1.5.12.49.22.22.1

A collection of statistics historical 1-day PM kept for a particular
DSL interface.

Indexes

Column	Syntax	OID
dslPmHist1dayIndex The index of 1-day historical record	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.1`
dslPmHist1dayStartTime The start time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.2`
dslPmHist1dayEndTime The end time of recording of this entry in mm/dd/yyyy hh/mm/ss format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.3`
dslPmHist1dayTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets) in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.4`
dslPmHist1dayTxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) transmitted in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.5`
dslPmHist1dayTxUnicastPkts The total number of unicast packets transmitted in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.6`
dslPmHist1dayTxBroadcastPkts The total number of broadcast packets transmitted in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.7`
dslPmHist1dayTxMulticastPkts The total number of multicast packets transmitted in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.8`
dslPmHist1dayTxDiscardPkts The total number of discard packets transmitted in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.9`
dslPmHist1dayRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets) in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.10`
dslPmHist1dayRxPkts The total number of packets (including bad packets, broadcast packets, and multicast packets) received in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.11`
dslPmHist1dayRxUnicastPkts The total number of unicast packets received in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.12`
dslPmHist1dayRxBroadcastPkts The total number of broadcast packets received in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.13`
dslPmHist1dayRxMulticastPkts The total number of multicast packets received in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.14`
dslPmHist1dayRxDiscardPkts The total number of discard packets received in the historical 1-day interval.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.22.1.15`

dslPmThreshProfTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.23 · 1 row entry · 14 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslPmThreshProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslPmThreshProfTable'

A list of dsl statistics PM threshold profile.

dslPmThreshProfEntry row .1.3.6.1.4.1.890.1.5.12.49.22.23.1

Statistics PM threshold kept for a particular
dsl interface.

Indexes

dslPmThreshProfName

Column Syntax OID

dslPmThreshProfName

Profile name of the entry.

dslPmThreshProfTxUnicastPkts

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.1

dslPmThreshProfTxOctets

Threshold of the total number of octets of data (including
those in bad packets) transmitted on the
network.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.2

dslPmThreshProfTxPkts

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.3

Threshold of the total number of unicast packets transmitted.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.4

dslPmThreshProfTxBroadcastPkts

Threshold of the total number of broadcast packets transmitted.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.5

dslPmThreshProfTxMulticastPkts

Threshold of the total number of multicast packets transmitted.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.6

dslPmThreshProfTxDiscardPkts

Threshold of the total number of discard packets transmitted.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.7

dslPmThreshProfRxOctets

Threshold of the total number of octets of data (including
those in bad packets) received on the network.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the va…

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.8

dslPmThreshProfRxPkts

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.9

dslPmThreshProfRxUnicastPkts

Threshold of the total number of unicast packets received.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.10

dslPmThreshProfRxBroadcastPkts

Threshold of the total number of broadcast packets received.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.11

dslPmThreshProfRxMulticastPkts

Threshold of the total number of multicast packets received.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.12

dslPmThreshProfRxDiscardPkts

Threshold of the total number of discard packets received.
Threshold should be a value in the range of 64 bit unsigned integer (0 ~ 18446744073709551615).
Please set the value you want in string format.

OctetStringr/w

Constraints:
range: 1-20

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.13

dslPmThreshProfRowStatus

Row status of the table entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.22.23.1.14

dslPmCurrStatisticTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.24 · 1 row entry · 13 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslPmCurrStatisticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslPmCurrStatisticTable'

A list of DSL current statistics PM entries.

dslPmCurrStatisticEntry row .1.3.6.1.4.1.890.1.5.12.49.22.24.1

A collection of current statistics PM kept for a particular DSL interface.

Indexes

dslBondingCurrCountersGroupName

Column	Syntax	OID
dslPmCurrStatisticTxOctets The total number of octets of data (including those in bad packets) transmitted on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.1`
dslPmCurrStatisticTxPkts The total number of packets (including bad packets, unicast packets, broadcast packets, and multicast packets) transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.2`
dslPmCurrStatisticTxUnicastPkts The total number of unicast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.3`
dslPmCurrStatisticTxBroadcastPkts The total number of broadcast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.4`
dslPmCurrStatisticTxMulticastPkts The total number of multicast packets transmitted.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.5`
dslPmCurrStatisticTxDiscard The total number of packets which were chosen to be discarded while transmitting.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.6`
dslPmCurrStatisticRxOctets The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.7`
dslPmCurrStatisticRxPkts The total number of packets (including bad packets, unicast packets, broadcast packets, and multicast packets) received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.8`
dslPmCurrStatisticRxUnicastPkts The total number of unicast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.9`
dslPmCurrStatisticRxBroadcastPkts The total number of broadcast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.10`
dslPmCurrStatisticRxMulticastPkts The total number of multicast packets received.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.11`
dslPmCurrStatisticRxDiscard The total number of packets which were chosen to be discarded while receiving.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.12`
dslPmCurrStatisticTimestamp The time when the counters of port updated.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.890.1.5.12.49.22.24.1.13`

dslBondingCurrCountersTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.25 · 1 row entry · 18 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslBondingCurrCountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslBondingCurrCountersTable'

A list of DSL current counters status.

dslBondingCurrCountersEntry row .1.3.6.1.4.1.890.1.5.12.49.22.25.1

A collection of current counters status for a particular DSL bonding group.

Indexes

Column	Syntax	OID
dslBondingCurrCountersGroupName	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.1`
dslBondingCurrCountersPtmRxPackets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.2`
dslBondingCurrCountersPtmNumFlushRequests	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.3`
dslBondingCurrCountersPtmNumTimeouts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.4`
dslBondingCurrCountersPtmNumDirectSidResets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.5`
dslBondingCurrCountersPtmRxSmallFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.6`
dslBondingCurrCountersPtmRxLargeFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.7`
dslBondingCurrCountersPtmRxBadFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.8`
dslBondingCurrCountersPtmRxLostFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.9`
dslBondingCurrCountersPtmRxLostStarts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.10`
dslBondingCurrCountersPtmRxLostEnds	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.11`
dslBondingCurrCountersPtmTxPackets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.12`
dslBondingCurrCountersAtmTxCells	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.13`
dslBondingCurrCountersAtmRxCells	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.14`
dslBondingCurrCountersAtmNumFlushRequests	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.15`
dslBondingCurrCountersAtmNumTimeouts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.16`
dslBondingCurrCountersAtmNumDirectSidResets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.17`
dslBondingCurrCountersAtmNumDiscards	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.25.1.18`

dslBonding15minCountersTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.26 · 1 row entry · 19 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslBonding15minCountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslBonding15minCountersTable'

A list of DSL current counters status.

dslBonding15minCountersEntry row .1.3.6.1.4.1.890.1.5.12.49.22.26.1

A collection of 15 minutes counters status for a particular DSL bonding group.

Indexes

dslBonding15minCountersGroupName

Column	Syntax	OID
dslBonding15minCountersGroupName	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.1`
dslBonding15minCountersElapsed	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.2`
dslBonding15minCountersPtmRxPackets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.3`
dslBonding15minCountersPtmNumFlushRequests	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.4`
dslBonding15minCountersPtmNumTimeouts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.5`
dslBonding15minCountersPtmNumDirectSidResets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.6`
dslBonding15minCountersPtmRxSmallFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.7`
dslBonding15minCountersPtmRxLargeFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.8`
dslBonding15minCountersPtmRxBadFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.9`
dslBonding15minCountersPtmRxLostFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.10`
dslBonding15minCountersPtmRxLostStarts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.11`
dslBonding15minCountersPtmRxLostEnds	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.12`
dslBonding15minCountersPtmTxPackets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.13`
dslBonding15minCountersAtmTxCells	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.14`
dslBonding15minCountersAtmRxCells	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.15`
dslBonding15minCountersAtmNumFlushRequests	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.16`
dslBonding15minCountersAtmNumTimeouts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.17`
dslBonding15minCountersAtmNumDirectSidResets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.18`
dslBonding15minCountersAtmNumDiscards	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.26.1.19`

dslBonding1dayCountersTable

table

.1.3.6.1.4.1.890.1.5.12.49.22.27 · 1 row entry · 19 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dslBonding1dayCountersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dslBonding1dayCountersTable'

A list of DSL current counters status.

dslBonding1dayCountersEntry row .1.3.6.1.4.1.890.1.5.12.49.22.27.1

A collection of 1 day counters status for a particular DSL bonding group.

Indexes

dslBonding1dayCountersGroupName

Column	Syntax	OID
dslBonding1dayCountersGroupName	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.1`
dslBonding1dayCountersElapsed	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.2`
dslBonding1dayCountersPtmRxPackets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.3`
dslBonding1dayCountersPtmNumFlushRequests	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.4`
dslBonding1dayCountersPtmNumTimeouts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.5`
dslBonding1dayCountersPtmNumDirectSidResets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.6`
dslBonding1dayCountersPtmRxSmallFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.7`
dslBonding1dayCountersPtmRxLargeFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.8`
dslBonding1dayCountersPtmRxBadFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.9`
dslBonding1dayCountersPtmRxLostFragments	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.10`
dslBonding1dayCountersPtmRxLostStarts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.11`
dslBonding1dayCountersPtmRxLostEnds	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.12`
dslBonding1dayCountersPtmTxPackets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.13`
dslBonding1dayCountersAtmTxCells	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.14`
dslBonding1dayCountersAtmRxCells	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.15`
dslBonding1dayCountersAtmNumFlushRequests	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.16`
dslBonding1dayCountersAtmNumTimeouts	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.17`
dslBonding1dayCountersAtmNumDirectSidResets	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.18`
dslBonding1dayCountersAtmNumDiscards	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.890.1.5.12.49.22.27.1.19`

syslogServerIpTable

table

.1.3.6.1.4.1.890.1.5.12.49.26.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk syslogServerIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::syslogServerIpTable'

Sets the IP addresses of Syslog managers (stations to send your Syslog message to).
You can configure up to four managers.

syslogServerIpEntry row .1.3.6.1.4.1.890.1.5.12.49.26.2.1

Indexes

syslogServerIpIndex

Column Syntax OID

syslogServerIpIndex

Index of Syslog servers

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.890.1.5.12.49.26.2.1.1

syslogServerIpAddressType

Syslog server IP address type

Enumerationr/w

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.890.1.5.12.49.26.2.1.2

syslogServerIpAddress

Syslog server IP address
<ipv4-address> 0.0.0.0 ~ 223.255.255.255
<ipv6-address> :: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Limit: syslogServerIpAddressType must be set before syslogServerIpAddress.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.890.1.5.12.49.26.2.1.3

dot3adTable

table

.1.3.6.1.4.1.890.1.5.12.49.27.1 · 1 row entry · 4 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dot3adTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::dot3adTable'

The table contains 802.3ad configuration.

dot3adEntry row .1.3.6.1.4.1.890.1.5.12.49.27.1.1

Indexes

dot3adGroupId

Column Syntax OID

dot3adGroupId

Group ID=1 for uplink group in ves1724-58v.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.890.1.5.12.49.27.1.1.1

dot3adEnable

Enable/disable 802.3ad function. When dot3ad is enabled, vlan-untag setting will be synchronized between GE 1 and GE 2 (GE 2 will Follow GE 1).
enable(1) - GE ports are aggregated statically.
enableWithLacp(2) - GE port…

Enumerationr/w

Enumerated Values:

1	enable
2	enableWithLacp
3	disable

.1.3.6.1.4.1.890.1.5.12.49.27.1.1.2

dot3adGroupName

The trunking group name.

.1.3.6.1.4.1.890.1.5.12.49.27.1.1.3

dot3adGroupPortList

The port list which joins the trunking group.

Q-BRIDGE-MIBPortList

.1.3.6.1.4.1.890.1.5.12.49.27.1.1.4

daisychainTable

table

.1.3.6.1.4.1.890.1.5.12.49.29.1 · 1 row entry · 1 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk daisychainTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::daisychainTable'

The table contains if uplink port is in daisychain mode.

daisychainEntry row .1.3.6.1.4.1.890.1.5.12.49.29.1.1

Indexes

RFC1213-MIBifIndex smcastPortTagGroupVid smcastPortTagGroupMac

Column Syntax OID

daisychainMode

The mode of uplink port.

Enumerationr/w

Enumerated Values:

1	standalone
2	daisychain

.1.3.6.1.4.1.890.1.5.12.49.29.1.1.1

smcastPortTagGroupTable

table

.1.3.6.1.4.1.890.1.5.12.49.31.2 · 1 row entry · 3 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk smcastPortTagGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::smcastPortTagGroupTable'

This table specify the static multicast group with MAC address.

smcastPortTagGroupEntry row .1.3.6.1.4.1.890.1.5.12.49.31.2.1

An entry of smcastTagGroupTable.

Indexes

Column Syntax OID

smcastPortTagGroupVid

The VLAN ID for multicast MAC address group.

Unsigned32

Constraints:
range: 1-4093

.1.3.6.1.4.1.890.1.5.12.49.31.2.1.1

smcastPortTagGroupMac

The multicast MAC address of the group.

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.890.1.5.12.49.31.2.1.2

smcastPortTagGroupRowStatus

The row status of the MAC multicast group entry.

RFC1213-MIBifIndex smcastPortUntagGroupMac

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.890.1.5.12.49.31.2.1.3

smcastPortUntagGroupTable

table

.1.3.6.1.4.1.890.1.5.12.49.31.3 · 1 row entry · 2 columns

Open in standard view

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk smcastPortUntagGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VES1724-58V-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VES1724-58V-MIB::smcastPortUntagGroupTable'

This table specify the static multicast group with MAC address.

smcastPortUntagGroupEntry row .1.3.6.1.4.1.890.1.5.12.49.31.3.1

An entry of smcastUntagGroupTable.

Indexes

Column Syntax OID

smcastPortUntagGroupMac

The multicast MAC address of the group.

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.890.1.5.12.49.31.3.1.1

smcastPortUntagGroupRowStatus

The row status of the MAC multicast group entry.