VDSL-LINE-EXT-SCM-MIB
The VDSL-LINE-MIB found in RFC 3728 defines objects for the
management of a pair of VDSL transceivers at each end of the VDSL
line. The VDSL-LINE-MIB configures and monitors the line code
independent parameters (TC layer) of the VDSL line. This MIB
module is an optional extension of the VDSL-LINE-MIB and defines
objects for configuration and monitoring of the line code specific
(LCS) elements (PMD layer) for VDSL lines using SCM coding. The
objects in this extension MIB MUST NOT be used for VDSL lines
using Multiple Carrier Modulation (MCM) line coding. If an object
in this extension MIB is referenced by a line which does not use
SCM, it has no effect on the operation of that line.
Naming Conventions:
Vtuc -- VDSL transceiver at near (Central) end of line
Vtur -- VDSL transceiver at Remote end of line
Vtu -- One of either Vtuc or Vtur
Curr -- Current
Atn -- Attenuation
LCS -- Line Code Specific
Max -- Maximum
Mgn -- Margin
PSD -- Power Spectral Density
Rx -- Receive
Snr -- Signal to Noise Ratio
Tx -- Transmit
Copyright (C) The Internet Society (2005). This version
of this MIB module is part of RFC 4069: see the RFC
itself for full legal notices.
- Source file
VDSL-LINE-EXT-SCM-MIB- Last revised
- Identity
vdslExtSCMMIB- Base OID
1.3.6.1.2.1.10.228
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) transmission Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
| VDSL-LINE-MIB | vdslLineConfProfileName |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'VDSL-LINE-EXT-SCM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'VDSL-LINE-EXT-SCM-MIB::vdslExtSCMMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VDSL-LINE-EXT-SCM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VDSL-LINE-EXT-SCM-MIB::vdslExtSCMMIB'
Objects (25)
Showing 25 of 25 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.228 |
||
.1.3.6.1.2.1.10.228.1 |
||
.1.3.6.1.2.1.10.228.1.1 |
||
.1.3.6.1.2.1.10.228.1.1.1 |
||
.1.3.6.1.2.1.10.228.1.1.1.1 |
||
.1.3.6.1.2.1.10.228.1.1.1.1.1 |
||
.1.3.6.1.2.1.10.228.1.1.1.1.2 |
||
.1.3.6.1.2.1.10.228.1.1.1.1.3 |
||
.1.3.6.1.2.1.10.228.1.1.1.1.4 |
||
|
log2Unsigned32
|
.1.3.6.1.2.1.10.228.1.1.1.1.5 |
|
|
-0.25 dBm/HzSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.10.228.1.1.1.1.6 |
|
.1.3.6.1.2.1.10.228.1.1.1.1.7 |
||
.1.3.6.1.2.1.10.228.1.1.2 |
||
.1.3.6.1.2.1.10.228.1.1.2.1 |
||
.1.3.6.1.2.1.10.228.1.1.2.1.1 |
||
.1.3.6.1.2.1.10.228.1.1.2.1.2 |
||
.1.3.6.1.2.1.10.228.1.1.2.1.3 |
||
.1.3.6.1.2.1.10.228.1.1.2.1.4 |
||
|
log2Unsigned32
|
.1.3.6.1.2.1.10.228.1.1.2.1.5 |
|
|
- 0.25 dBm/HzSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.10.228.1.1.2.1.6 |
|
|
0.25 dBSNMPv2-SMIInteger32
|
.1.3.6.1.2.1.10.228.1.1.2.1.7 |
|
|
0.25 dBUnsigned32
|
.1.3.6.1.2.1.10.228.1.1.2.1.8 |
|
.1.3.6.1.2.1.10.228.1.2 |
||
.1.3.6.1.2.1.10.228.1.2.1 |
||
.1.3.6.1.2.1.10.228.1.2.2 |
Dependencies (10) 5 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- HC-PerfHist-TC-MIBrfc
- HCNUM-TCrfc
- SNMP-FRAMEWORK-MIBrfc
- VDSL-LINE-MIBrfc
- VDSL-LINE-EXT-SCM-MIBrfcselected
Type Definitions (1)
| Enumeration |
optionalBand(1)firstDownstreamBand(2)firstUpstreamBand(3)secondDownstreamBand(4)secondUpstreamBand(5)thirdDownstreamBand(6)thirdUpstreamBand(7) |
Conformance Groups (1)
|
vdslLineSCMConfProfileBandInUse vdslLineSCMConfProfileBandTransmitPSDLevel vdslLineSCMConfProfileBandSymbolRate vdslLineSCMConfProfileBandConstellationSize vdslLineSCMConfProfileBandCenterFrequency vdslLineSCMConfProfileBandRowStatus vdslLineSCMPhysBandInUse vdslLineSCMPhysBandCurrPSDLevel vdslLineSCMPhysBandCurrSymbolRate vdslLineSCMPhysBandCurrConstellationSize vdslLineSCMPhysBandCurrCenterFrequency vdslLineSCMPhysBandCurrSnrMgn vdslLineSCMPhysBandCurrAtn
A collection of objects providing configuration
information for a VDSL line based upon single carrier modulation modem. |
.1.3.6.1.2.1.10.228.1.2.1.1
|
Compliance Statements (1)
OID
.1.3.6.1.2.1.10.228.1.2.2.1The compliance statement for SNMP entities which
manage VDSL interfaces.
manage VDSL interfaces.
Required groups
| mandatory | vdslLineExtSCMGroup |