UX-OBJECTS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
74

uxAlarmCfgTable

table
.1.3.6.1.4.1.177.15.1.2 · 1 row entry · 12 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxAlarmCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxAlarmCfgTable' 
This table gives the information about the alarms and events that this device is
capable of generating. When a condition satisfying the alarms configured
in this table occurs, an alarm is posted in uxActAlarmTable with associated information.
uxAlarmCfgEntry row .1.3.6.1.4.1.177.15.1.2.1
An entry in the alarm table
Indexes
Column Syntax OID
uxAlarmIndex
Index of this alarm/event in the config table. This will be the combination of uxAlarmID and uxAlarmSubID
uxAlarmIndex =uxAlarmID *65536+ uxAlarmSubID
Integer32
Constraints:
range: 1-2147418112
 .1.3.6.1.4.1.177.15.1.2.1.1
uxAlarmID
Event ID of this alarm/event.
Integer32
Constraints:
range: 1-32767
 .1.3.6.1.4.1.177.15.1.2.1.2
uxAlarmSubID
Event SubID of this alarm/event.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.177.15.1.2.1.3
uxAlarmCondition
Alarm/event name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.2.1.4
uxAlarmSeverity
Alarm severity level.
Eg: none
warning
minor
major
critical
Enumeration
Enumerated Values:
0none
1warning
2minor
3major
4critical
 .1.3.6.1.4.1.177.15.1.2.1.5
uxAlarmCategory
Alarm/event category number. As per Bell Core Standard GR-1248-CORE
Enumeration
Enumerated Values:
1communication
2equipment
3processing
4general
5environmental
6qos
7security
 .1.3.6.1.4.1.177.15.1.2.1.6
uxAlarmCancelType
When an alarm is configured as auto-cancel(1), it clears from
the UX active alarm table, when the condition causing it goes away.
These alarms do not need explicit user intervention to cancel
(clear) them.
Non-auto-canc…
Enumeration
Enumerated Values:
0nonAutoCancel
1autoCancel
 .1.3.6.1.4.1.177.15.1.2.1.7
uxAlarmEvtType
Type of the evnt, whether it is an alarm or a normal event
Enumeration
Enumerated Values:
1alarm
2event
 .1.3.6.1.4.1.177.15.1.2.1.8
uxAlarmDecodeKey
Decode key that is used to interpret alarm/event instances when the
alarms are posted to active alarm Table.

The index attribute uxAlarmInstanceID is decoded based on the
value of this attribute.
Eg: Deco…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.2.1.9
uxAlarmClrID
Clearing event Event ID of this alarm. Applicable to the alarms for which the auto clear is set
Integer32
Constraints:
range: 1-32767
 .1.3.6.1.4.1.177.15.1.2.1.10
uxAlarmClrSubID
Clearing event Event sub ID of this alarm. Applicable to the alarms for which the auto clear is set.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.177.15.1.2.1.11
uxAlarmDescription
Alarm description. Any info user wants to note
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.2.1.12

uxActAlarmTable

table
.1.3.6.1.4.1.177.15.1.3 · 1 row entry · 19 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxActAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxActAlarmTable' 
Active Alarm table in the system
uxActAlarmEntry row .1.3.6.1.4.1.177.15.1.3.1
An entry in the active alarm table
Indexes
Column Syntax OID
uxAlarmActiveIndex
Index of Active alarm table
Integer32
Constraints:
range: 1-2147418112
 .1.3.6.1.4.1.177.15.1.3.1.1
uxAlarmConfigIndex
Index value of Alarm configuration number
Integer32
Constraints:
range: 1-2147418112
 .1.3.6.1.4.1.177.15.1.3.1.2
uxAlarmActiveID
EventID of the active alarm
Integer32
Constraints:
range: 1-32767
 .1.3.6.1.4.1.177.15.1.3.1.3
uxAlarmActiveSubID
EventID of the active alarm
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.177.15.1.3.1.4
uxAlarmActiveCondition
Active alarm/event name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.3.1.5
uxAlarmActiveSeverity
Alarm severity level.
Eg: none
warning
minor
major
critical
Enumeration
Enumerated Values:
0none
1warning
2minor
3major
4critical
 .1.3.6.1.4.1.177.15.1.3.1.6
uxAlarmActiveCategory
Alarm/event category number. As per Bell Core Standard GR-1248-CORE
Enumeration
Enumerated Values:
1communication
2equipment
3processing
4general
5environmental
6qos
7security
 .1.3.6.1.4.1.177.15.1.3.1.7
uxAlarmActiveCancelType
When an alarm is configured as auto-cancel(1), it clears from
the UX active alarm table, when the condition causing it goes away.
These alarms do not need explicit user intervention to cancel
(clear) them.
Non-auto-canc…
Enumeration
Enumerated Values:
0nonAutoCancel
1autoCancel
 .1.3.6.1.4.1.177.15.1.3.1.8
uxAlarmActiveFirstOccur
Alarm first occurrence Time displayed in milli sec.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.177.15.1.3.1.9
uxAlarmActiveLastOccur
Alarm last occurrence Time displayed in milli sec.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.177.15.1.3.1.10
uxAlarmActiveCount
Number of times this alert occurred. This count is relevant only for
non-auto-cancelling alerts.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.177.15.1.3.1.11
uxAlarmActiveDecodeKey
Decode key that is used to interpret alarm/event instances when the
alarms are posted to active alarm Table.

The index attribute uxAlarmInstanceID is decoded based on the
value of this attribute.
Eg: Deco…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.3.1.12
uxAlarmActiveSourceInstance
Instance that has generated this alert. This is encoded as
illustrated in the following example :
decode key = shelf;card;port
Source instance = 1;1;1 indicates that the alert is generated on shelf 1 card 1 and po…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.3.1.13
uxAlarmActiveState
Informs if an active alarm is acknowledged/unacknowledged/cancelled.
Enumeration
Enumerated Values:
1acklnowledged
2unacknowledged
3cancel
 .1.3.6.1.4.1.177.15.1.3.1.14
uxAlarmActiveClrEvtID
Clearing event Event ID of this alarm. Applicable to the alarms for which the auto clear is set
Integer32
Constraints:
range: 1-32767
 .1.3.6.1.4.1.177.15.1.3.1.15
uxAlarmActiveClrEvtSubID
Clearing event Event sub ID of this alarm. Applicable to the alarms for which the auto clear is set.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.177.15.1.3.1.16
uxAlarmActiveDescription
Alarm description. Any info user wants to note
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.3.1.17
uxAlarmActiveHighestSeverityAlarm
Highest Severity Active alarm
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.177.15.1.3.1.18
uxAlarmActiveHardWareID
Hardware ID of the node
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.3.1.19

uxSystemUsageStatsIntervalTable

table
.1.3.6.1.4.1.177.15.1.5.9 · 1 row entry · 3 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxSystemUsageStatsIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxSystemUsageStatsIntervalTable' 
The System Usage Interval table contains various 
system usage statitics collected over the previous
4 hours.The past 4 hours are broken into 240 
completed 1 minute intervals.  Each row in this table 
represents one such interval .
uxSystemUsageIntervalEntry row .1.3.6.1.4.1.177.15.1.5.9.1
An entry in the System Usage Interval table
Indexes
Column Syntax OID
uxSystemUsageIntervalNumber
A number between 1 and 240, where 1 is the most
recently completed 1 minute interval and 240 is
the 1 minute interval completed 239 minutes prior
to interval 1.
Integer32
Constraints:
range: 1-240
 .1.3.6.1.4.1.177.15.1.5.9.1.1
uxSystemUsageIntervalCPUUsage
CPU Usage statistics for 1 minute interval.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.4.1.177.15.1.5.9.1.2
uxSystemUsageIntervalMemoryUsage
Memory Usage statistics for 1 minute interval.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.4.1.177.15.1.5.9.1.3

uxDSPPeakUsageStatsIntervalTable

table
.1.3.6.1.4.1.177.15.1.5.14 · 1 row entry · 2 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxDSPPeakUsageStatsIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxDSPPeakUsageStatsIntervalTable' 
The DSP Usage Stats table contains various statistics
being collected by DSP for the previous 24 hours. 
The past 24 hours are broken into 24 completed 
1 hour intervals.  Each row in this table 
represents one such interval.
uxDSPPeakUsageIntervalEntry row .1.3.6.1.4.1.177.15.1.5.14.1
An entry in the System Usage Current table
Indexes
Column Syntax OID
uxDSPPeakUsageIntervalIndex
The Index value which identifies the interval.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.177.15.1.5.14.1.1
uxDSPPeakIntervalUsage
Peak DSP usage.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.177.15.1.5.14.1.2

uxDSPResourceTable

table
.1.3.6.1.4.1.177.15.1.6 · 1 row entry · 7 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxDSPResourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxDSPResourceTable' 
This table gives the information about the DSP resources in UX.
uxDSPResourceEntry row .1.3.6.1.4.1.177.15.1.6.1
An entry in the DSP resource table
Indexes
Column Syntax OID
uxDSPIndex
DSP Resource table index
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.177.15.1.6.1.1
uxDSPModType
DSP module type
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.6.1.2
uxDSPIsPresent
If the DSP resource is present. This is because we list all the possible DSP resources through this table and this object specifies if the DSP resource is actually installed on UX.
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.177.15.1.6.1.3
uxDSPCPUUsage
DSP Resource usage in % rounded of to the next integer.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.177.15.1.6.1.4
uxDSPChannelsInUse
Number of channels in use by this DSP
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.177.15.1.6.1.5
uxDSPServiceStatus
Service state of the DSP
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.177.15.1.6.1.6
uxCodecsSupported
Codecs supported by this DSP, displayed as a '|' seperated string
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.6.1.7

uxDSX0ConfigTable

table
.1.3.6.1.4.1.177.15.1.7 · 1 row entry · 4 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxDSX0ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxDSX0ConfigTable' 
The DS0 Configuration table.
uxDSX0ConfigEntry row .1.3.6.1.4.1.177.15.1.7.1
An entry in the DS0 Configuration table. There
is an entry in this table for each DS0 interface.
Indexes
No indexes recorded
Column Syntax OID
uxDSX0Type
Type of DS0
Enumeration
Enumerated Values:
0e1
1t1
 .1.3.6.1.4.1.177.15.1.7.1.1
uxDSX0Speed
Speed of DS0
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.177.15.1.7.1.2
uxDSX0Lastchange
Last change of status on this DS0 in EPOCH secs
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.177.15.1.7.1.3
uxDSX0AdminState
Admin state of this DS0
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.177.15.1.7.1.4

uxModuleTable

table
.1.3.6.1.4.1.177.15.1.8 · 1 row entry · 7 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxModuleTable' 
This table gives the information about all the installed
Modules in UX.
uxModuleEntry row .1.3.6.1.4.1.177.15.1.8.1
An entry in the Module table
Indexes
Column Syntax OID
uxModuleIndex
Index of the Module.
It also represents the physical location of the
card/module on the system.
NOTE: For different UX Chassis, the index of modules/cards
may differ.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.177.15.1.8.1.1
uxModuleType
Module type indicating the physical module type.
Integer values 7, 8, 9, 10, 15 - reserved for future modules.
Enumeration
Enumerated Values:
0unknown
1dS1-2Spans
2dS1-4Spans
3dS1-8Spans
4eX
5mSPDC910DSP
6mSPDC300DSP
7reservedModule1
8reservedModule2
9reservedModule3
10reservedModule4
11aSM
12mainBoard
13chassis
14powerSupply
15reservedModule5
16node
17fXS-8PortsLineCard
18fXS-16PortsLineCard
19fXS-24PortsLineCard
20fXS-4PortsLowerBoard
21fXS-4PortsUpperBoard
22fXO-4PortsLowerBoard
23fXO-4PortsUpperBoard
24bRI-4PortsBoard
25dS1-1SpanBoard
26dS1-2SpansBoard
27fXS-4PortsNRLowerBoard
 .1.3.6.1.4.1.177.15.1.8.1.2
uxModulePartNumber
Module part information
Example: 404-40001
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.8.1.3
uxModuleVersionNumber
Module version information
Example: 001
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.8.1.4
uxModuleSerialNumber
Module serial number information
Example: A4000110040059
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.177.15.1.8.1.5
uxModuleMfgWeek
Module manufacturing week number

NOTE: This object is not applicable for uxModuleType of PowerSupply
type. For PowerSupply Modules, 0 will be returned.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.177.15.1.8.1.6
uxModuleMfgYear
Module manufacturing year number

NOTE: This object is not applicable for uxModuleType of PowerSupply
type. For PowerSupply Modules, 0 will be returned.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.177.15.1.8.1.7

uxPSUTable

table
.1.3.6.1.4.1.177.15.1.9 · 1 row entry · 13 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxPSUTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxPSUTable' 
This table provides health and runtime information on all
Power Supplies on UX. This table returns all applicable power
supply slots.
     NOTE: THIS MIB IS NOT SUPPORTED FOR UX1000 MODEL
uxPSUEntry row .1.3.6.1.4.1.177.15.1.9.1
An entry in the PSU table
Indexes
Column Syntax OID
uxPSUIndex
Index of the Power Supply.
NOTE:
UX2000:
Index 1, is the left PSU
Index 2, is the right PSU
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.177.15.1.9.1.1
uxPSUIsPresent
Provides indication if the power supply is present on the device.
Enumeration
Enumerated Values:
1present
2notpresent
 .1.3.6.1.4.1.177.15.1.9.1.2
uxPSUIsInputGood
Provides status of PSU Input health.
This could be used to deduce the health state of the Power Supply
as following:
uxPSUIsPresent(1) and yes(1) - Power Supply is Up
no(2) - Power Supply is Down
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.177.15.1.9.1.3
uxPSUInputType
Provides the type of PSU Input i.e. AC or DC
Enumeration
Enumerated Values:
0notapplicable
1ac
2dc
 .1.3.6.1.4.1.177.15.1.9.1.4
uxPSUPowerIn
Provides Power (W) coming into the supply
Integer32
Constraints:
range: 0-500
 .1.3.6.1.4.1.177.15.1.9.1.5
uxPSUPowerOut
Provides Power (W) going out from the supply
Integer32
Constraints:
range: 0-500
 .1.3.6.1.4.1.177.15.1.9.1.6
uxPSUVoltageIn
Provides Voltage coming into the supply
Integer32
Constraints:
range: 0-300
 .1.3.6.1.4.1.177.15.1.9.1.7
uxPSUVoltageOut
Provides Voltage going out from the supply
This information is returned in 1000s of the unit value
Integer32
Constraints:
range: 0-15000
 .1.3.6.1.4.1.177.15.1.9.1.8
uxPSUCurrentIn
Provides Current (A) coming into the supply
This information is returned in 1000s of the unit value
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.177.15.1.9.1.9
uxPSUCurrentOut
Provides Current (A) going out from the supply
This information is returned in 1000s of the unit value
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.177.15.1.9.1.10
uxPSUTemperature
Provides temperature (C) of the supply
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.177.15.1.9.1.11
uxPSUFanSpeed1
Provides speed (RPM) of the Fan 1 of the supply
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.177.15.1.9.1.12
uxPSUFanSpeed2
Provides speed (RPM) of the Fan 2 of the supply
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.177.15.1.9.1.13

uxFanTable

table
.1.3.6.1.4.1.177.15.1.10 · 1 row entry · 2 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxFanTable' 
This table gives the information about all the installed
Fans on UX.
     NOTE: THIS MIB IS NOT SUPPORTED FOR UX1000 MODEL
uxFanEntry row .1.3.6.1.4.1.177.15.1.10.1
An entry in the Fan table
Indexes
Column Syntax OID
uxFanIndex
Index of the installed Fan.
Integer32
Constraints:
range: 1-9
 .1.3.6.1.4.1.177.15.1.10.1.1
uxFanSpeed
Speed (RPM) of the Fan
Note:
Fan can be considered Down if the speed is 0
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.177.15.1.10.1.2

uxCardTable

table
.1.3.6.1.4.1.177.15.1.11 · 1 row entry · 3 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxCardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxCardTable' 
This table gives information about all the installed
Cards on UX.
     NOTE: THIS MIB IS NOT SUPPORTED FOR UX1000 MODEL
uxCardEntry row .1.3.6.1.4.1.177.15.1.11.1
An entry in the Card table
Indexes
Column Syntax OID
uxCardIndex
Index of the installed Card.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.177.15.1.11.1.1
uxCardType
Card type indicating the physical card type.
Integer values 5 to 16 do not indicate a physical card type.
Enumeration
Enumerated Values:
0unknown
1dS1-2Spans
2dS1-4Spans
3dS1-8Spans
4eX
17fXS-8PortsLineCard
18fXS-16PortsLineCard
19fXS-24PortsLineCard
20fXS-4PortsLowerBoard
21fXS-4PortsUpperBoard
22fXO-4PortsLowerBoard
23fXO-4PortsUpperBoard
24bRI-4PortsBoard
25dS1-1SpanBoard
26dS1-2SpansBoard
27fXS-4PortsNRLowerBoard
 .1.3.6.1.4.1.177.15.1.11.1.2
uxCardServiceStatus
Operational status of the installed card.
Note:
This attribute is not applicable for cards/modules on UX1000 hardware.
Enumeration
Enumerated Values:
0down
1up
2notapplicable
 .1.3.6.1.4.1.177.15.1.11.1.3

uxUserStatsIntervalTable

table
.1.3.6.1.4.1.177.15.1.12.11 · 1 row entry · 2 columns
Open in standard view
Uses the ribbon variant from /opt/observium/mibs/ribbon.
Command help
Walk uxUserStatsIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UX-OBJECTS-MIB' -M '/opt/observium/mibs/ribbon:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UX-OBJECTS-MIB::uxUserStatsIntervalTable' 
Provides peak number of user sessions for the specified interval.
uxUserStatsIntervalEntry row .1.3.6.1.4.1.177.15.1.12.11.1
An entry in the user statistics interval table.
Indexes
Column Syntax OID
uxUserStatsIntervalNumber
A number between 1 and 24, where 1 is the most
recently completed 1 hour interval and 24 is
the 1 hour interval completed 23 hours and 45
minutes prior to interval 1.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.177.15.1.12.11.1.1
uxUserStatsPeakSessions
Peak user sessions during the requested interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.177.15.1.12.11.1.2