USHA-P-MIB Table View

A list of input table entries.  The number of entries
is given by the value of upsInputGroupNumLines.

upsInputGroupEntry row .1.3.6.1.4.1.2468.1.2.1.1.3.3.1

An entry containing information applicable to a
particular input line.

Indexes

upsInputGroupLineIndex

Column	Syntax	OID
upsInputGroupLineIndexmandatory The index of UpsInputGroupEntry.	UPS-MIBPositiveInteger Constraints: range: 0-65535	.1.3.6.1.4.1.2468.1.2.1.1.3.3.1.1
upsInputGroupFrequencymandatory The present input frequency.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.3.3.1.2
upsInputGroupVoltagemandatory The input utility line voltage in 0.1 volts.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.3.3.1.3
upsInputGroupCurrentmandatory The magnitude of the present input current in 0.1 A.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.3.3.1.4
upsInputGroupTruePowermandatory The magnitude of the present input true power.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.3.3.1.5
upsInputGroupVoltageMaxmandatory The maximum utility line voltage in 0.1 VAC for last 1 minute.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.3.3.1.6
upsInputGroupVoltageMinmandatory The minimum utility line voltage in 0.1 VAC for last 1 minute.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.3.3.1.7

A list of output table entries.  The number of
entries is given by the value of upsOutputGroupNumLines.

upsOutputGroupEntry row .1.3.6.1.4.1.2468.1.2.1.1.4.4.1

An entry containing information applicable to a
particular output line.

Indexes

upsOutputGroupLineIndex

Column	Syntax	OID
upsOutputGroupLineIndexmandatory The output line identifier.	UPS-MIBPositiveInteger Constraints: range: 0-65535	.1.3.6.1.4.1.2468.1.2.1.1.4.4.1.1
upsOutputGroupVoltagemandatory The output voltage of the UPS system in 0.1 volts.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.4.4.1.2
upsOutputGroupCurrentmandatory The output current of the UPS system in 0.1 Amps.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.4.4.1.3
upsOutputGroupPowermandatory The present output true power.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.4.4.1.4
upsOutputGroupPercentLoadmandatory The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.4.4.1.5

A list of bypass table entries.  The number of
entries is given by the value of upsBypassGroupNumLines.

upsBypassGroupEntry row .1.3.6.1.4.1.2468.1.2.1.1.5.3.1

An entry containing information applicable to a
particular bypass input.

Indexes

upsBypassGroupLineIndex

Column	Syntax	OID
upsBypassGroupLineIndexmandatory The bypass line identifier.	UPS-MIBPositiveInteger Constraints: range: 0-65535	.1.3.6.1.4.1.2468.1.2.1.1.5.3.1.1
upsBypassGroupVoltagemandatory The present bypass voltage.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.5.3.1.2
upsBypassGroupCurrentmandatory The present bypass current.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.5.3.1.3
upsBypassGroupPowermandatory The present true power conveyed by the bypass.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.5.3.1.4

Table which describes the schedule for automatically battery
test.

upsBatteryTestScheduleEntry row .1.3.6.1.4.1.2468.1.2.1.1.6.6.1

Indexes

upsBatteryTestScheduleIndex

Column	Syntax	OID
upsBatteryTestScheduleIndexmandatory The index of battery test scheduled.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2468.1.2.1.1.6.6.1.1
upsBatteryTestScheduleDaymandatory The weekday on which the UPS should start battery test.	Enumerationr/w Enumerated Values: 1 sunday 2 monday 3 tuesday 4 wednesday 5 thursday 6 friday 7 saturday 8 specialDay 9 none	.1.3.6.1.4.1.2468.1.2.1.1.6.6.1.2
upsBatteryTestScheduleTimemandatory The time that the battery test will be initiated in hh:mm format.	RFC1213-MIBDisplayStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.2468.1.2.1.1.6.6.1.3
upsBatteryTestScheduleTypemandatory The type of battery test.	Enumerationr/w Enumerated Values: 1 none 2 battTest10sec 3 battTestUntilLow 4 battTestWithTime	.1.3.6.1.4.1.2468.1.2.1.1.6.6.1.4
upsBatteryTestScheduleTestWithTimemandatory The battTestWithTime of battery test is supported or not.	Enumeration Enumerated Values: 1 supported 2 notSupported	.1.3.6.1.4.1.2468.1.2.1.1.6.6.1.5
upsBatteryTestScheduleSpecialDaymandatory The special day that the battery test will be initiated in dd/mm/yyyy format.	RFC1213-MIBDisplayStringr/w Constraints: range: 10-10	.1.3.6.1.4.1.2468.1.2.1.1.6.6.1.6

Table which describes the parametes for shutdown process
when shutdown event occurs

upsControlShutdownParametersEntry row .1.3.6.1.4.1.2468.1.2.1.1.7.4.1

Indexes

upsControlEvent

Column	Syntax	OID
upsControlEventmandatory The shutdown event identification	Enumeration Enumerated Values: 1 acFail 2 batteryLow 3 upsOverload 4 upsOverTempeature 5 weeklySchedule 6 specialDaySchedule 7 emdTemperatureOverThreshold 8 emdAlarm1 9 emdAlarm2	.1.3.6.1.4.1.2468.1.2.1.1.7.4.1.1
upsControlEventStatusmandatory Status of the corresponding shutdown Event. When set to disable(), shutdown process will not start when corresponding event occured.	Enumerationr/w Enumerated Values: 1 disable 2 warning 3 clientShutdown 4 upsTurnOff	.1.3.6.1.4.1.2468.1.2.1.1.7.4.1.2
upsControlDelaymandatory The Delay after the occurance of the curresponding shutdown event that USHA should issue shutdown request to connected clients. For WeeklyScheduledShutdown and SpecialScheduledShutdown, this is the time before the confi…	Integer32r/w Constraints: range: 0-10080	.1.3.6.1.4.1.2468.1.2.1.1.7.4.1.3
upsControlFirstWarningmandatory The delay after the occurance of the curresponding shutdown event that the USHA will start sending the warning message to the connected clients. The value is in units of seconds	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.2468.1.2.1.1.7.4.1.4
upsControlWarningIntervalmandatory The frequency of sending warning messages to the connected clients when the curresponding shutdown event occurs. The value is in units of seconds.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.2468.1.2.1.1.7.4.1.5

The table to schedule shutting down the ups by weekly.

upsControlWeeklyScheduleEntry row .1.3.6.1.4.1.2468.1.2.1.1.7.5.1

The entries for each day.

Indexes

upsControlWeeklyIndex

Column	Syntax	OID
upsControlWeeklyIndexmandatory The index of scheduled events.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2468.1.2.1.1.7.5.1.1
upsControlWeeklyShutdownDaymandatory The weekday on which the UPS should shut down.	Enumerationr/w Enumerated Values: 1 sunday 2 monday 3 tuesday 4 wednesday 5 thursday 6 friday 7 saturday 8 none	.1.3.6.1.4.1.2468.1.2.1.1.7.5.1.2
upsControlWeeklyShutdownTimemandatory The time that the process of shutting down the UPS will be initiated in hh:mm format.	RFC1213-MIBDisplayStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.2468.1.2.1.1.7.5.1.3
upsControlWeeklyRestartDaymandatory The weekday on which the UPS should restart	Enumerationr/w Enumerated Values: 1 sunday 2 monday 3 tuesday 4 wednesday 5 thursday 6 friday 7 saturday 8 none	.1.3.6.1.4.1.2468.1.2.1.1.7.5.1.4
upsControlWeeklyRestartTimemandatory The time the UPS will restart in hh:mm format.	RFC1213-MIBDisplayStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.2468.1.2.1.1.7.5.1.5

The table to schedule shutting down the ups.

upsControlSpecialScheduleEntry row .1.3.6.1.4.1.2468.1.2.1.1.7.6.1

The entries for each day.

Indexes

upsControlSpecialIndex

Column	Syntax	OID
upsControlSpecialIndexmandatory The index of scheduled events.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2468.1.2.1.1.7.6.1.1
upsControlSpecialShutdownDaymandatory The date on which the UPS should shut down in dd/mm/yyyy format.	RFC1213-MIBDisplayStringr/w Constraints: range: 10-10	.1.3.6.1.4.1.2468.1.2.1.1.7.6.1.2
upsControlSpecialShutdownTimemandatory The time that the process of shutting down the UPS will be initiated in hh:mm format	RFC1213-MIBDisplayStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.2468.1.2.1.1.7.6.1.3
upsControlSpecialRestartDaymandatory The date on which the UPS should restart in dd/mm/yyyy format	RFC1213-MIBDisplayStringr/w Constraints: range: 10-10	.1.3.6.1.4.1.2468.1.2.1.1.7.6.1.4
upsControlSpecialRestartTimemandatory The time the UPS will restart in hh:mm format.	RFC1213-MIBDisplayStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.2468.1.2.1.1.7.6.1.5

The devices powered by UPS and registered to USHA

upsDevicesEntry row .1.3.6.1.4.1.2468.1.2.1.1.9.2.1

The devices protected by USHA

Indexes

indexOfDevice

Column	Syntax	OID
indexOfDevicemandatory The index of the device that is plugged into the UPS.	UPS-MIBNonNegativeInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.9.2.1.1
addrOfDevicemandatory The ip address of the device.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2468.1.2.1.1.9.2.1.2
nameOfDevicemandatory The name/description of the device plugged into the UPS.	RFC1213-MIBDisplayString Constraints: range: 0-31	.1.3.6.1.4.1.2468.1.2.1.1.9.2.1.3
timeOfConnectionmandatory The device registered to USHA	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2468.1.2.1.1.9.2.1.4
timeOfConnectionTimemandatory The device registered time to USHA.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.2468.1.2.1.1.9.2.1.5
timeOfConnectionTimeoutmandatory The device timeout counter. Unit: 10 seconds	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.9.2.1.6

A list of managers to send traps to.  The number of
entries is given by the value of agentConfigNumTrapReceivers

agentConfigTrapsReceiversEntry row .1.3.6.1.4.1.2468.1.2.1.1.10.25.1

The managers to send traps to.

Indexes

trapsIndex

Column	Syntax	OID
trapsIndexmandatory The index to a trap receiver entry.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2468.1.2.1.1.10.25.1.1
trapsReceiverAddrmandatory The IP address of the manager to send a trap to.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2468.1.2.1.1.10.25.1.2
receiverCommunityStringmandatory The community name to use in the trap when sent to the manager.	RFC1213-MIBDisplayStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.2468.1.2.1.1.10.25.1.3
receiverNmsTypemandatory The trap group that NMS desired.	Enumerationr/w Enumerated Values: 1 none 2 rfc1628-trap 3 usha-trap	.1.3.6.1.4.1.2468.1.2.1.1.10.25.1.4
receiverSeverityLevelmandatory The severity level of traps to be received by this manager.	Enumerationr/w Enumerated Values: 1 informational 2 warning 3 severe	.1.3.6.1.4.1.2468.1.2.1.1.10.25.1.5
receiverDescriptionmandatory Description of trap receivers	RFC1213-MIBDisplayStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2468.1.2.1.1.10.25.1.6

A list of managers which can access USHA with private
community string.

agentConfigAccessControlEntry row .1.3.6.1.4.1.2468.1.2.1.1.10.26.1

The managers.

Indexes

trapsIndex

Column	Syntax	OID
accessIndexmandatory The index to a access control entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2468.1.2.1.1.10.26.1.1
accessControlAddrmandatory The IP address of the manager to access USHA	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2468.1.2.1.1.10.26.1.2
accessCommunityStringmandatory The community name to use in the manager when access USHA	RFC1213-MIBDisplayStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.2468.1.2.1.1.10.26.1.3
accessControlModemandatory Access type, only read/Write access type can change parameter of USHA	Enumerationr/w Enumerated Values: 1 readOnly 2 readWrite 3 notAccess	.1.3.6.1.4.1.2468.1.2.1.1.10.26.1.4