UPSMAN-MCU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
57

dcRectifierTable

table
.1.3.6.1.4.1.1356.1.4.2 · 1 row entry · 7 columns
Open in standard view
Uses the benning variant from /opt/observium/mibs/benning.
Command help
Walk dcRectifierTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UPSMAN-MCU-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UPSMAN-MCU-MIB::dcRectifierTable' 
A list of rectifier table entries.
The number of entries is given by the value of dcRectifierNumRectifiers.
dcRectifierEntry row .1.3.6.1.4.1.1356.1.4.2.1
An entry containing information applicable to a particular rectifier.
Indexes
Column Syntax OID
dcRectifierIndex
The rectifier identifier.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.4.2.1.1
dcRectifierFirmwareVersion
The rectifier's firmware version.
SNMPv2-TCDisplayString
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1356.1.4.2.1.2
dcRectifierStatus
The current state of the rectifier. Rectifiers can be on or off.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.1356.1.4.2.1.3
dcRectifierFault
This integer holds a bitmask for the retifier faults:
Bit 0: Low Input
Bit 2: Communication
Bit 3: Temperature Fan
Bit 7: Rectifier Failure
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.4.2.1.4
dcRectifierVoltage
The magnitude of the rectifier voltage.
0.01 Volt DCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.4.2.1.5
dcRectifierCurrent
The magnitude of the present rectifier current.
0.1 Amp DCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.4.2.1.6
dcRectifierAddress
The address of the rectifier in the system.
NonNegativeInteger
Type Constraints:
range: 0..2147483647
Description:
This data type is a non-negative value.
 .1.3.6.1.4.1.1356.1.4.2.1.7

dcBatteryTable

table
.1.3.6.1.4.1.1356.1.5.3 · 1 row entry · 7 columns
Open in standard view
Uses the benning variant from /opt/observium/mibs/benning.
Command help
Walk dcBatteryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UPSMAN-MCU-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UPSMAN-MCU-MIB::dcBatteryTable' 
A list of battery table entries.
The number of entries is given by the value of dcBatteryNumBatteries.
dcBatteryEntry row .1.3.6.1.4.1.1356.1.5.3.1
An entry containing information applicable to a particular string of batteries.
Indexes
Column Syntax OID
dcBatteryIndex
The battery identifier.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.5.3.1.1
dcBatteryFault
The fault of the battery string.
Bit 1: Temperature Fault
Bit 3: Test Fault
Bit 4: Fuse Fault
Bit 5: Contactor Fault
Bit 7: Other Fault
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.5.3.1.2
dcBatteryVoltage
The magnitude of the battery voltage.
0.01 Volt DCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.5.3.1.3
dcBatteryCurrent
The magnitude of the present battery current.
0.1 Amp DCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.5.3.1.4
dcBatteryTemperature
The battery temperature.
0.1 degrees Centigrade/FahrenheitInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.5.3.1.5
dcBatteryModel
A string identifying the battery string, e.g. VHB/4/300Ah.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1356.1.5.3.1.6
dcBatteryAddress
The address of the battery in the system.
NonNegativeInteger
Type Constraints:
range: 0..2147483647
Description:
This data type is a non-negative value.
 .1.3.6.1.4.1.1356.1.5.3.1.7

dcLoadDistributionTable

table
.1.3.6.1.4.1.1356.1.6.2 · 1 row entry · 7 columns
Open in standard view
Uses the benning variant from /opt/observium/mibs/benning.
Command help
Walk dcLoadDistributionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UPSMAN-MCU-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UPSMAN-MCU-MIB::dcLoadDistributionTable' 
A list of load distribution table entries.
dcLoadDistributionEntry row .1.3.6.1.4.1.1356.1.6.2.1
An entry containing information applicable to a particular load string.
Indexes
Column Syntax OID
dcLoadDistributionIndex
The load distribution identifier.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.6.2.1.1
dcLoadDistributionVoltage
The magnitude of the particular load voltage.
0.01 Volt DCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.6.2.1.2
dcLoadDistributionCurrent
The magnitude of the particular load current.
0.1 Amp DCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.6.2.1.3
dcLoadDistributionPower
The particular load power.
WattsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.6.2.1.4
dcLoadDistributionDescription
The description of the particular load string.
SNMPv2-TCDisplayString
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1356.1.6.2.1.5
dcLoadDistributionStatus
The status of the particular load fuse.
Bit 1: OK
Bit 2: Fuse Blown
Bit 4: Contactor Open
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.6.2.1.6
dcLoadDistributionAddress
The address of the load distribution in the system.
NonNegativeInteger
Type Constraints:
range: 0..2147483647
Description:
This data type is a non-negative value.
 .1.3.6.1.4.1.1356.1.6.2.1.7

dcBypassTable

table
.1.3.6.1.4.1.1356.1.7.1.2 · 1 row entry · 13 columns
Open in standard view
Uses the benning variant from /opt/observium/mibs/benning.
Command help
Walk dcBypassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UPSMAN-MCU-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UPSMAN-MCU-MIB::dcBypassTable' 
A list of bypass table entries.
dcBypassEntry row .1.3.6.1.4.1.1356.1.7.1.2.1
An entry containing information applicable to a particular bypass.
Indexes
Column Syntax OID
dcBypassIndex
The bypass identifier.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.7.1.2.1.1
dcBypassHardwareVersion
The bypass hardware version.
SNMPv2-TCDisplayString
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1356.1.7.1.2.1.2
dcBypassStatus
The current operation mode of the bypass.
Bit 1: Mains Operation
Bit 2: Inverter Operation
Bit 3: Service Bypass Operation
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.3
dcBypassFault
This object indicates a fault of the bypass.
Bit 1: Majoor Fault
Bit 2: Minor Fault
Bit 3: Switchover Blocked
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.4
dcBypassInputVoltageSource1
The magnitude of the bypass input voltage of the primary source.
RMS VoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.5
dcBypassInputVoltageSource2
The magnitude of the bypass input voltage of the secondary source.
RMS VoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.6
dcBypassOutputVoltage
The magnitude of the bypass output voltage.
RMS VoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.7
dcBypassOutputCurrent
The magnitude of the present bypass output current.
RMS AmpsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.8
dcBypassFrequency
The present bypass frequency.
0.1 HertzInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.9
dcBypassActivePower
The magnitude of the present active bypass power.
WattsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.10
dcBypassReactivePower
The magnitude of the present reactive bypass power.
VARInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.11
dcBypassComplexPower
The magnitude of the present complex bypass power.
VAInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.1.2.1.12
dcBypassAddress
The address of the bypass in the system.
NonNegativeInteger
Type Constraints:
range: 0..2147483647
Description:
This data type is a non-negative value.
 .1.3.6.1.4.1.1356.1.7.1.2.1.13

dcInverterTable

table
.1.3.6.1.4.1.1356.1.7.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the benning variant from /opt/observium/mibs/benning.
Command help
Walk dcInverterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UPSMAN-MCU-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UPSMAN-MCU-MIB::dcInverterTable' 
A list of inverter table entries.  The number of entries is given by the value of dcInverterNumInverter.
dcInverterEntry row .1.3.6.1.4.1.1356.1.7.2.2.1
An entry containing information applicable to a particular inverter.
Indexes
Column Syntax OID
dcInverterIndex
The inverter identifier.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.7.2.2.1.1
dcInverterFirmwareVersion
The inverter's firmware version.
SNMPv2-TCDisplayString
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1356.1.7.2.2.1.2
dcInverterStatus
The current state of the inverter. ...
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.1356.1.7.2.2.1.3
dcInverterFault
This object indicates the fault of the inverter.
Bit 1: Inverter Failure
Bit 6: Overtemperature Fan
Bit 8: Output out of Telerance
Bit 11: Output Fuse Fault
Bit 12: Overload
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.2.2.1.4
dcInverterOutputVoltage
The magnitude of the inverter output voltage.
RMS VoltsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.2.2.1.5
dcInverterOutputCurrent
The magnitude of the present inverter output current.
RMS AmpsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.7.2.2.1.6
dcInverterAddress
The address of the inverter in the system.
NonNegativeInteger
Type Constraints:
range: 0..2147483647
Description:
This data type is a non-negative value.
 .1.3.6.1.4.1.1356.1.7.2.2.1.7

dcBatteryTestTable

table
.1.3.6.1.4.1.1356.1.8.2 · 1 row entry · 9 columns
Open in standard view
Uses the benning variant from /opt/observium/mibs/benning.
Command help
Walk dcBatteryTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UPSMAN-MCU-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UPSMAN-MCU-MIB::dcBatteryTestTable' 
A list of battery table entries.
dcBatteryTestEntry row .1.3.6.1.4.1.1356.1.8.2.1
An entry containing information applicable to a particular battery-string test.
Indexes
Column Syntax OID
dcBatteryTestIndex
The battery test identifier.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.8.2.1.1
dcBatteryTestEndVoltage
The battery string voltage at the end of the battery test.
0.01 Volt DCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.8.2.1.2
dcBatteryTestDuration
The duration of the last battery test in minutes.
minutesInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.8.2.1.3
dcBatteryTestDischargedEnergy
This discharged energy during the last battery test.
AhInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1356.1.8.2.1.4
dcBatteryTestType
The type of the last battery test.
Enumeration
Enumerated Values:
1timeBased
 .1.3.6.1.4.1.1356.1.8.2.1.5
dcBatteryTestResult
The result of the last battery test.
Enumeration
Enumerated Values:
1ok
2failed
 .1.3.6.1.4.1.1356.1.8.2.1.6
dcBatteryTestDate
A string containing the date of battery test start
(YYYY-MM-DD).
SNMPv2-TCDisplayString
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1356.1.8.2.1.7
dcBatteryTestTime
A string containing the time of battery test start (HH:MM).
SNMPv2-TCDisplayString
Constraints:
range: 0-7
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1356.1.8.2.1.8
dcBatteryTestAddress
The address of the battery in the system.
NonNegativeInteger
Type Constraints:
range: 0..2147483647
Description:
This data type is a non-negative value.
 .1.3.6.1.4.1.1356.1.8.2.1.9

dcAlarmTable

table
.1.3.6.1.4.1.1356.1.11.2 · 1 row entry · 4 columns
Open in standard view
Uses the benning variant from /opt/observium/mibs/benning.
Command help
Walk dcAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UPSMAN-MCU-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UPSMAN-MCU-MIB::dcAlarmTable' 
A list of alarm entries.
dcAlarmEntry row .1.3.6.1.4.1.1356.1.11.2.1
An entry containing information applicable to a particular alarm.
Indexes
Column Syntax OID
dcAlarmId
A unique identifier for an alarm condition. This value must remain constant.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.11.2.1.1
dcAlarmDescr
A reference to an alarm description object. The object referenced should not be
accessible, but rather be used to provide a unique description of the alarm condition.
SNMPv2-TCAutonomousType
Description:
Represents an independently extensible type identification
value. It may, for example, indicate a particular sub-tree
with further MIB definitions, or define a particular type of
protocol or hardware.
 .1.3.6.1.4.1.1356.1.11.2.1.2
dcAlarmTime
The value of sysUpTime when the alarm condition was detected. If the alarm
condition was detected at the time of agent startup and presumably existed before
agent startup, the value of dcAlarmTime shall equal 0.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1356.1.11.2.1.3
dcAlarmDevice
This value shows the device that causes the alarm.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.11.2.1.4

dcAuxiliaryTable

table
.1.3.6.1.4.1.1356.1.12.2 · 1 row entry · 3 columns
Open in standard view
Uses the benning variant from /opt/observium/mibs/benning.
Command help
Walk dcAuxiliaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UPSMAN-MCU-MIB' -M '/opt/observium/mibs/benning:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UPSMAN-MCU-MIB::dcAuxiliaryTable' 
A list of auxiliary table entries.
The number of entries is given by the value of dcAuxiliaryNumAux.
dcAuxiliaryEntry row .1.3.6.1.4.1.1356.1.12.2.1
An entry containing information applicable to a particular auxiliary component.
Indexes
Column Syntax OID
dcAuxiliaryIndex
The auxiliary identifier.
PositiveInteger
Type Constraints:
range: 1..2147483647
Description:
This data type is a non-zero and non-negative value.
 .1.3.6.1.4.1.1356.1.12.2.1.1
dcAuxiliaryDescription
A string describing the auxiliary component, e.g. fuel level, configured in the agent.
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1356.1.12.2.1.2
dcAuxiliaryStatus
The current state of the component.
Enumeration
Enumerated Values:
1ok
2fault
 .1.3.6.1.4.1.1356.1.12.2.1.3