ThreeParMIB
Recognized by Observium This file specifies management information interface for
all HPE 3PAR, Primera, Alletra and GreenLake for Block Storage
products. This information is normally used
by any management software that utilizes SNMP as management
standard. The SNMP agent inside the device provides the
specified information.
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
- Source file
ThreeParMIB- Last revised
- Identity
threepar- Base OID
1.3.6.1.4.1.12925
Imported Objects
| SNMPv2-CONF | AGENT-CAPABILITIES (no object page) MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-MIB | authenticationFailure snmpTraps sysName systemGroup |
| SNMPv2-SMI | Counter64 enterprises Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the hp MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ThreeParMIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ThreeParMIB::threepar'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ThreeParMIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ThreeParMIB::threepar'
Objects (55)
Showing 55 of 55 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.12925 |
||
.1.3.6.1.4.1.12925.1 |
||
.1.3.6.1.4.1.12925.1.1 |
||
.1.3.6.1.4.1.12925.1.1.1 |
||
.1.3.6.1.4.1.12925.1.1.1.1 |
||
.1.3.6.1.4.1.12925.1.1.1.2 |
||
.1.3.6.1.4.1.12925.1.1.1.3 |
||
.1.3.6.1.4.1.12925.1.1.2 |
||
.1.3.6.1.4.1.12925.1.1.2.1 |
||
.1.3.6.1.4.1.12925.1.1.2.2 |
||
.1.3.6.1.4.1.12925.1.1.2.3 |
||
.1.3.6.1.4.1.12925.1.2 |
||
.1.3.6.1.4.1.12925.1.2.0 |
||
.1.3.6.1.4.1.12925.1.3 |
||
.1.3.6.1.4.1.12925.1.3.1 |
||
.1.3.6.1.4.1.12925.1.4 |
||
.1.3.6.1.4.1.12925.1.4.1 |
||
.1.3.6.1.4.1.12925.1.4.2 |
||
.1.3.6.1.4.1.12925.1.7 |
||
.1.3.6.1.4.1.12925.1.7.1 |
||
|
Integer32
|
.1.3.6.1.4.1.12925.1.7.1.1 |
|
.1.3.6.1.4.1.12925.1.7.1.10 |
||
.1.3.6.1.4.1.12925.1.7.1.11 |
||
.1.3.6.1.4.1.12925.1.7.1.12 |
||
.1.3.6.1.4.1.12925.1.7.1.13 |
||
.1.3.6.1.4.1.12925.1.7.1.14 |
||
.1.3.6.1.4.1.12925.1.7.1.15 |
||
|
Enumeration
|
.1.3.6.1.4.1.12925.1.7.1.2 |
|
.1.3.6.1.4.1.12925.1.7.1.3 |
||
|
Unsigned32
|
.1.3.6.1.4.1.12925.1.7.1.4 |
|
.1.3.6.1.4.1.12925.1.7.1.5 |
||
|
OctetString
|
.1.3.6.1.4.1.12925.1.7.1.6 |
|
|
Unsigned32
|
.1.3.6.1.4.1.12925.1.7.1.7 |
|
|
Unsigned32
|
.1.3.6.1.4.1.12925.1.7.1.8 |
|
|
Enumeration
|
.1.3.6.1.4.1.12925.1.7.1.9 |
|
.1.3.6.1.4.1.12925.1.9 |
||
.1.3.6.1.4.1.12925.1.9.1 |
||
.1.3.6.1.4.1.12925.1.9.2 |
||
.1.3.6.1.4.1.12925.1.9.3 |
||
.1.3.6.1.4.1.12925.1.9.3.1 |
||
.1.3.6.1.4.1.12925.1.9.3.1.1 |
||
.1.3.6.1.4.1.12925.1.9.3.1.1.1 |
||
|
nanosecondsSNMPv2-SMICounter64
|
.1.3.6.1.4.1.12925.1.9.3.1.1.2 |
|
.1.3.6.1.4.1.12925.1.9.3.1.1.3 |
||
.1.3.6.1.4.1.12925.1.9.3.1.1.4 |
||
.1.3.6.1.4.1.12925.1.9.3.1.1.5 |
||
|
secondsSNMPv2-SMICounter64
|
.1.3.6.1.4.1.12925.1.9.3.1.1.6 |
|
.1.3.6.1.4.1.12925.1.9.3.1.1.7 |
||
.1.3.6.1.4.1.12925.1.9.3.2 |
||
.1.3.6.1.4.1.12925.1.9.3.2.1 |
||
.1.3.6.1.4.1.12925.1.9.3.2.1.1 |
||
|
ticksSNMPv2-SMICounter64
|
.1.3.6.1.4.1.12925.1.9.3.2.1.2 |
|
|
ticksSNMPv2-SMICounter64
|
.1.3.6.1.4.1.12925.1.9.3.2.1.3 |
|
|
ticksSNMPv2-SMICounter64
|
.1.3.6.1.4.1.12925.1.9.3.2.1.4 |
|
|
nanosecondsSNMPv2-SMICounter64
|
.1.3.6.1.4.1.12925.1.9.3.2.1.5 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SNMPv2-MIBrfc
- ThreeParMIBhpselected
Type Definitions (1)
| OctetString |
Conformance Groups (8)
Compliance Statements (4)
OID
.1.3.6.1.4.1.12925.1.1.2.1.1A collection of objects providing basic notifications for
a HPE 3PAR server.
a HPE 3PAR server.
Required groups
| mandatory | alertNotifyGroup | |
| mandatory | alertNotifyEventsGroup |
OID
.1.3.6.1.4.1.12925.1.1.2.2.1A collection of objects providing basic instrumentation for
a HPE 3PAR server.
a HPE 3PAR server.
Required groups
| mandatory | storeServAlertsGroup | |
| mandatory | storeServAlertsEvents |
OID
.1.3.6.1.4.1.12925.1.1.2.3.1Compliance for SNMPv2 standard
traps that are extended by HPE 3PAR.
traps that are extended by HPE 3PAR.
Required groups
| mandatory | snmpv2TrapExtensionObjectsGroup | |
| mandatory | snmpv2TrapExtensionEventsGroup |
OID
.1.3.6.1.4.1.12925.1.9.2.1A collection of objects providing basic instrumentation for
a HPE 3PAR server.
a HPE 3PAR server.
Required groups
| mandatory | nodeCpuStatsGroup | |
| mandatory | cpuStatsGroup |
Notifications / Traps (227)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.12925.1.2.0.1 |
There are currently <num_luns> active VLUNs, which is above the supported limit of <max_luns> active VLUNs
|
|
.1.3.6.1.4.1.12925.1.2.0.10 |
<cpg_name> <cpg_id> Deduplication Group not started due to metadata inconsistency; manual check required.
|
|
.1.3.6.1.4.1.12925.1.2.0.100 |
Disabled B Port; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.101 |
Missing B Port; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.102 |
Errors on B Port; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.103 |
Prolonged Missing B Port; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.104 |
Over Temperature Warning; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.105 |
Over Temperature Alert; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.106 |
Invalid Media; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.107 |
Failed Hardware; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.108 |
Smart Threshold Exceeded; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.109 |
Multiple Chunklets Media Bad; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.11 |
Data Integrity Field (DIF) detected inconsistency for [[vvol]]
|
|
.1.3.6.1.4.1.12925.1.2.0.110 |
Media Failed; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.111 |
Increased Error Count; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.112 |
DIF Threshold Exceeded; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.113 |
Prolonged Not Ready; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.114 |
No Valid Ports; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.115 |
Inquiry Failed; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.116 |
Unit Ready Failed; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.117 |
Read Capacity Failed; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.118 |
Write Label Failed; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.119 |
Mode Page Update Failed; Magazine <mag_id> Physical Disk <pd_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.12 |
Maintenance Check Required; Virtual Volume <vv_id>(<vv_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.120 |
Read Label Failed; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.121 |
Medium Format Corrupted; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.122 |
Low Wear Level Remaining; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.123 |
Miscompare; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.124 |
Invalid Cage; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.125 |
Slow Drive; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.126 |
Servicing; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.127 |
Drive Error Bit Set; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.128 |
Failed Hardware; Disk <wwn_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.129 |
Media Failed; Disk <wwn_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.13 |
LDs Not Started; Virtual Volume <vv_id>(<vv_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.130 |
Replace Drive; Disk <wwn_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.131 |
Authentication internal error. Client address <IPaddr> port <port>
|
|
.1.3.6.1.4.1.12925.1.2.0.132 |
Node <node_id> PS <power_supply_id> Battery <battery_id>: Battery Failed during battery test.
|
|
.1.3.6.1.4.1.12925.1.2.0.133 |
Expired; Node <node_id> [Power Supply <power_supply_id>] Battery <battery_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.134 |
Charging Failed; Node <node_id> [Power Supply <power_supply_id>] Battery <battery_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.135 |
Internal Error; Node <node_id> [Power Supply <power_supply_id>] Battery <battery_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.136 |
Load Sharing Failed; Node <node_id> [Power Supply <power_supply_id>] Battery <battery_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.137 |
Fan Failed; Node <node_id> [Power Supply <power_supply_id>] Battery <battery_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.138 |
DC Failed; Node <node_id> [Power Supply <power_supply_id>] Battery <battery_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.139 |
Charger Failed; Node <node_id> [Power Supply <power_supply_id>] Battery <battery_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.14 |
Copy Failed; Virtual Volume <vv_id>(<vv_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.140 |
Failed; Node <node_id> [Power Supply <power_supply_id>] Battery <battery_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.141 |
Port <port_id> shut down: <time_shutdown>
|
|
.1.3.6.1.4.1.12925.1.2.0.142 |
Host port (<node>:<slot>:<port>) is down (<reason>)
|
|
.1.3.6.1.4.1.12925.1.2.0.143 |
The Remote Copy link <remote_copy_link_process_name> has changed its status to <status>
|
|
.1.3.6.1.4.1.12925.1.2.0.144 |
Remote copy group <rm_grp_name> with ID <rm_grp_id> has transitioned to logging mode due to resource limitations.
|
|
.1.3.6.1.4.1.12925.1.2.0.145 |
Remote copy group <rm_grp_name> with ID <rm_grp_id> has been stopped due to resource limitations.
|
|
.1.3.6.1.4.1.12925.1.2.0.146 |
Remote copy group <rm_grp_name> with ID <rm_grp_id> could not transition out of logging state when replication
resources became available, retrying. |
|
.1.3.6.1.4.1.12925.1.2.0.147 |
The administrative network interface has failed on node [[hw_node]]. The system cannot be managed from this node.
|
|
.1.3.6.1.4.1.12925.1.2.0.148 |
Thin provisioned VV <name> has reached reserved allocation <limit> of <XX>G (<yy>% of <ZZ>G)
|
|
.1.3.6.1.4.1.12925.1.2.0.149 |
Reserved snapshot space for VV <name> has reached allocation <limit> of <XX>G (<yy>% of <ZZ>G)
|
|
.1.3.6.1.4.1.12925.1.2.0.15 |
Snapdata Invalid; Virtual Volume <vv_id>(<vv_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.150 |
CPG <cpg name> SA space has reached allocation <limit> of <XX>G.
|
|
.1.3.6.1.4.1.12925.1.2.0.151 |
Thin provisioned VV <name> <unable to> allocate <SA or SD or SD_2> space from CPG <cpg name>
|
|
.1.3.6.1.4.1.12925.1.2.0.152 |
Snapshot space for VV <VV name> <unable to> allocate <SA or SD or SD_2> space from CPG <cpg name>
|
|
.1.3.6.1.4.1.12925.1.2.0.153 |
Total <FC> raw space usage at <ZZ> (above <75>% of total <total>)
|
|
.1.3.6.1.4.1.12925.1.2.0.154 |
Total <FC> raw space usage at <ZZ> (above <85>% of total <total>)
|
|
.1.3.6.1.4.1.12925.1.2.0.155 |
Total <FC> raw space usage at <ZZ> (above <95>% of total <total>)
|
|
.1.3.6.1.4.1.12925.1.2.0.156 |
Total <NL> raw space usage at <space used> (above <75>% of total <total space>)
|
|
.1.3.6.1.4.1.12925.1.2.0.157 |
Total <NL> raw space usage at <ZZ> (above <85>% of total <total>)
|
|
.1.3.6.1.4.1.12925.1.2.0.158 |
Total <NL> raw space usage at <ZZ> (above <95>% of total <total>)
|
|
.1.3.6.1.4.1.12925.1.2.0.159 |
Total <SSD> raw space usage at <ZZ> (above <75>% of total <total>)
|
|
.1.3.6.1.4.1.12925.1.2.0.16 |
Internal Consistency Error; Virtual Volume <vv_id>(<vv_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.160 |
Total <SSD> raw space usage at <space used> (above <85>% of total <total space>)
|
|
.1.3.6.1.4.1.12925.1.2.0.161 |
Total <SSD> raw space usage at <ZZ> (above <95>% of total <total>)
|
|
.1.3.6.1.4.1.12925.1.2.0.162 |
Preserved data LDs are full. No more preserved data can be handled.
|
|
.1.3.6.1.4.1.12925.1.2.0.163 |
Power Supply Fan Warning; Cage <cage_id> Power Supply <power_supply_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.164 |
Power Supply Off; Cage <cage_id> Power Supply <power_supply_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.165 |
Power Supply Failed; Cage <cage_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.166 |
Power Supply Failed; Cage <cage_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.167 |
Power Supply Warning; Cage <cage_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.168 |
Power Supply Fan Not Present; Cage <cage_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.169 |
Power Supply Fan Not Available; Cage <cage_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.17 |
Needs To Be Checked; Virtual Volume <vv_id>(<vv_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.170 |
Power Supply Not Available; Cage <cage_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.171 |
Power Supply AC Failed; Cage <cage_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.172 |
Interface Card Failed; Cage <cage_id> Interface Card <interface_card_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.173 |
CPU Firmware Not Current; Cage <cage_id> Interface Card <interface_card_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.174 |
Interface Card Failed; Cage <cage_id> Interface Card <interface_card_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.175 |
Interface Card Warning; Cage <cage_id> Interface Card <interface_card_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.176 |
Missing; Cage <cage_id> Magazine <mag_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.177 |
Offloop, Power Supply Failure; Cage <cage_id> Magazine <mag_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.178 |
System write cache availability is degraded.
|
|
.1.3.6.1.4.1.12925.1.2.0.179 |
Volume Unsynced - requires a full resync since ldck is in progress; Remote Copy Volume <volume_id>(<volume_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.18 |
Preserved; Virtual Volume <vv_id>(<vv_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.180 |
Resync Snapshot Became Stale - full sync required; Remote Copy Volume <volume_id>(<volume_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.181 |
Volume Group Unsynced - did not take snapshots while stopping group; Remote Copy Volume <volume_id>(<volume_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.182 |
Volume Unsynced - secondary volume was not marked as in-sync; Remote Copy Volume <volume_id>(<volume_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.183 |
Volume Unsynced - volume was unavailable when group was stopped; Remote Copy Volume <volume_id>(<volume_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.184 |
Volume Unsynced - node or sysmgr failure; Remote Copy Volume <volume_id>(<volume_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.185 |
Volume Unsynced - promote of snapshot failed; Remote Copy Volume <volume_id>(<volume_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.186 |
Volume Unsynced - could not take snapshot during sysmgr startup; Remote Copy Volume <volume_id>(<volume_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.187 |
Write To Secondary Volume Failed; Remote Copy Volume <volume_id>(<volume_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.188 |
Sync Failed; Remote Copy Volume <volume_id>(<volume_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.189 |
Sync Failed - could not take local snapshots; Remote Copy Volume Group <group_id>(<group_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.19 |
Invalid; Virtual Volume <vv_id>(<vv_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.190 |
Sync Failed - could not take remote snapshots; Remote Copy Volume Group <group_id>(<group_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.191 |
Sync Failed - could not communicate with target; Remote Copy Volume Group <group_id>(<group_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.192 |
Sync Failed - synchronization snapshot has been deleted; Remote Copy Volume Group <group_id>(<group_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.193 |
Resync Failed - resynchronization snapshot has been deleted; Remote Copy Volume Group <group_id>(<group_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.194 |
Not All Volumes In Group Are In Sync; Remote Copy Volume Group <group_id>(<group_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.195 |
Resync Failed - volume is currently syncing; Remote Copy Volume Group <group_id>(<group_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.196 |
All Links To Target Are Down; Remote Copy Target <target_id>(<target_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.197 |
Not All Connections Are Up; Remote Copy Link <link_id>(<link_name>) Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.198 |
Down Due To Send Error Or Missing Heartbeat; Remote Copy Link <link_id>(<link_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.199 |
Multiple Link Down Errors Within 24 Hours; Remote Copy Link <link_id>(<link_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.2 |
Port <portnum> Failed (Shutdown Due To Too Many Firmware Cores).
|
|
.1.3.6.1.4.1.12925.1.2.0.20 |
Stale; Virtual Volume <vv_id>(<vv_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.200 |
Link Has Been Down For More Than 4 Hours; Remote Copy Link <link_id>(<link_name>) Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.201 |
Node <nid> free disk space is below acceptable limits: root <free_space>MB altroot <alt_space>MB common <comm_space>MB.
|
|
.1.3.6.1.4.1.12925.1.2.0.202 |
Node drive for node <hw_node> drive <driveid> with WWN <sw_wwn> has encryption enabled, but encryption is not enabled on the system.
|
|
.1.3.6.1.4.1.12925.1.2.0.203 |
Node drive for node <hw_node> drive <driveid> with WWN <sw_wwn> is not encrypted, but encryption is enabled on the system.
|
|
.1.3.6.1.4.1.12925.1.2.0.204 |
Unable to do I/O to the node drive for node <hw_node> drive <driveid> with WWN <sw_wwn>.
|
|
.1.3.6.1.4.1.12925.1.2.0.205 |
[[hw_node]] syslog received dual boot drive failure message. Problem exists on device: <nodedrivesdxdev_name>, on sata port: <nodedrivesataport_name>
|
|
.1.3.6.1.4.1.12925.1.2.0.206 |
[[hw_node]] /proc/mdstat detected degraded node drive raid. Problem exists on device: <nodedrivesdxdev_name>, on sata port: <nodedrivesataport_name>
|
|
.1.3.6.1.4.1.12925.1.2.0.207 |
<name> appears to be unresponsive.
|
|
.1.3.6.1.4.1.12925.1.2.0.208 |
<name> event handling appears to be unresponsive.
|
|
.1.3.6.1.4.1.12925.1.2.0.209 |
Node <node_id>, Data Cache DIMM <dimm_id> is failing. Uncorrectable Error.
|
|
.1.3.6.1.4.1.12925.1.2.0.21 |
LD <ld_id>(<ld_name>) row <ld_row> set <ld_set> failed. Internal reason <reason>.
|
|
.1.3.6.1.4.1.12925.1.2.0.210 |
Node <node_id> Control Cache DIMM <dimm_id> overheating (<temp> C).
|
|
.1.3.6.1.4.1.12925.1.2.0.211 |
Cage Battery End of Life; Cage <cage_id> Cage Battery <battery_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.212 |
Cage Battery Failed; Cage <cage_id> Cage Battery <battery_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.213 |
Cage Battery Not Present; Cage <cage_id> Cage Battery <battery_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.214 |
Node Control Cache DIMM Failure; Node <node_id>, Contol_Cache_DIMM failed, <DIMM_INFO> (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.215 |
Node Data Cache DIMM Failure; Node <node_id>, Data_Cache_DIMM failed, <DIMM_INFO> (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.216 |
Node IDE Drive Failure; Node <node_id>, IDE_DRIVE failed, Instance: <dev_num> (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.217 |
Node HBA Failure; Node <node_id>, HBA failed, Instance: <dev_num> (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.218 |
A self-encrypting drive with WWN <sw_wwn> belongs to another system: <name>
|
|
.1.3.6.1.4.1.12925.1.2.0.219 |
A self-encrypting drive with WWN <sw_wwn> has an unrecognized encryption key
|
|
.1.3.6.1.4.1.12925.1.2.0.22 |
Some Logical Disks (LDs) in the system are running with reduced availability.
|
|
.1.3.6.1.4.1.12925.1.2.0.220 |
A self-encrypting drive with WWN <sw_wwn> is encrypted, but encryption is not enabled on the system.
|
|
.1.3.6.1.4.1.12925.1.2.0.221 |
The local Key Manager is in an invalid state
|
|
.1.3.6.1.4.1.12925.1.2.0.222 |
The encryption management service is unavailable due to excessive failures getting encryption status from nodesvr during darsvr startup. If encryption is enabled on this system, drive replacement is prevented and the system will not be able to recover from power failure.
|
|
.1.3.6.1.4.1.12925.1.2.0.223 |
The encryption management service is unavailable due to excessive failures getting encryption status from nodesvr during fipsvr startup. If encryption is enabled on this system, drive replacement is prevented and the system will not be able to recover from power failure.
|
|
.1.3.6.1.4.1.12925.1.2.0.224 |
The encryption management service is unavailable because fipsvr failed to start up in FIPS mode. If encryption is enabled on this system, drive replacement is prevented and the system will not be able to recover from power failure.
|
|
.1.3.6.1.4.1.12925.1.2.0.225 |
The encryption management service is unavailable because communication failed to the External Key Manager during startup. If encryption is enabled on this system, drive replacement is prevented and the system will not be able to recover from power failure
|
|
.1.3.6.1.4.1.12925.1.2.0.23 |
Log [[ld]] has a failed raid set: <set_num>. Reason <reason>.
|
|
.1.3.6.1.4.1.12925.1.2.0.24 |
pd wwn <pd_wwn> has failed for too long. Disk monitoring has stopped on this disk.
|
|
.1.3.6.1.4.1.12925.1.2.0.25 |
System Reporter threshold alert <pd_str_data> with condition <pd_valstr1> has been satisfied by pd <pd_valstr0> with value(s) <pd_valstr2>.
|
|
.1.3.6.1.4.1.12925.1.2.0.26 |
System shutdown for over temp PDs, TOC quorum loss - <num> TOC drives are at or above their spin down temperatures.
|
|
.1.3.6.1.4.1.12925.1.2.0.27 |
Physical Disk (PD) <pd_id> with World Wide Name (WWN) <pd_wwn> has exceeded its temperature threshold (<disk_temp> C, limit <thres_temp> C) but it could not be spundown. Location (<cageid>:<magid>:<driveid>).
|
|
.1.3.6.1.4.1.12925.1.2.0.28 |
Physical Disk (PD) <pd_id> with World Wide Name (WWN) <pd_wwn> has exceeded its temperature threshold (<disk_temp> C, limit <thres_temp> C) and it has been spundown. Location (<cageid>:<magid>:<driveid>).
|
|
.1.3.6.1.4.1.12925.1.2.0.29 |
Physical Disk with World Wide Name (WWN) <pd_wwn> has exceeded its temperature threshold (<disk_temp> C, limit <thres_temp> C) but it could not be spundown. Location (<cageid>:<magid>:<driveid>).
|
|
.1.3.6.1.4.1.12925.1.2.0.3 |
[[sw_port]], supported device count exceeded for port.
|
|
.1.3.6.1.4.1.12925.1.2.0.30 |
Physical Disk with World Wide Name (WWN) <pd_wwn> has exceeded its temperature threshold (<disk_temp> C, limit <thres_temp> C) and it has been spundown. Location (<cageid>:<magid>:<driveid>).
|
|
.1.3.6.1.4.1.12925.1.2.0.31 |
Failed Hardware; Magazine <mag_id> Physical Disk <pd_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.32 |
Media Failed; Magazine <mag_id> Physical Disk <pd_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.33 |
Failed Hardware; Magazine <mag_id> Physical Disk <pd_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.34 |
Media Failed; Magazine <mag_id> Physical Disk <pd_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.35 |
Replace Drive; Magazine <mag_id> Physical Disk <pd_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.36 |
System is not able to recover from double node failure.
|
|
.1.3.6.1.4.1.12925.1.2.0.37 |
Node recovery requires a powerfail to continue
|
|
.1.3.6.1.4.1.12925.1.2.0.38 |
License feature <feature_name> has expired. You are in violation of your
3PAR License Agreement. |
|
.1.3.6.1.4.1.12925.1.2.0.39 |
Powerfail recovery could not be performed for volume <prb_vname> with id <prb_vvid>. This may have caused loss of data for that volume. Use checkvv to check and fix the volume metadata consistency.
|
|
.1.3.6.1.4.1.12925.1.2.0.4 |
Disk [[sw_port]] has exceeded a threshold tracking IO errors. <count> errors have been seen in one hour.
|
|
.1.3.6.1.4.1.12925.1.2.0.40 |
Battery states could not be read from the configuration file. System cache is disabled.
|
|
.1.3.6.1.4.1.12925.1.2.0.41 |
System recovery stalled due to unstarted vvs. Num vvs: <pfs_num_vvs>.
|
|
.1.3.6.1.4.1.12925.1.2.0.42 |
System is waiting for the encryption state of nodes <wait_nodes> to become valid. If this state persists, check existing alerts for more information.
|
|
.1.3.6.1.4.1.12925.1.2.0.43 |
Node <nid> is being shutdown by the system because it had internal drive errors.
|
|
.1.3.6.1.4.1.12925.1.2.0.44 |
Node <nid> is not being shutdown by the system even though there are internal drive errors because it is the last node left alive.
|
|
.1.3.6.1.4.1.12925.1.2.0.45 |
Node <nid> is not being shutdown by the system even though there are internal drive errors because some LDs cannot be served by the remaining nodes.
|
|
.1.3.6.1.4.1.12925.1.2.0.46 |
Node <nid> is being rebooted by the system because it had internal drive errors.
|
|
.1.3.6.1.4.1.12925.1.2.0.47 |
<number of fails> authentication failures in <n> secs
|
|
.1.3.6.1.4.1.12925.1.2.0.48 |
Node <node_id> is offline
|
|
.1.3.6.1.4.1.12925.1.2.0.49 |
Memory usage critical: MemTotal: <memtotal>K MemFree: <memfree>K Buffers: <buffers>K Cached: <cached>K SwapCached: <swapcached>K Active: <active>K Inactive: <inactive>K SwapTotal: <swaptotal>K SwapFree: <swapfree>K Dirty: <dirty>K Writeback: <writeback>K AnonPages: <anonpages>K Mapped: <mapped>K Slab: <slab>K PageTables: <pagetables>K VmallocTotal: <vmalloctotal>K VmallocUsed: <vmallocused>K VmallocChunk: <vmallocchunk>K NFS_Unstable: <nfs_unstable>K Bounce: <bounce>K CommitLimit: <commitlimit>K Commited_AS: <commited_as>K.
|
|
.1.3.6.1.4.1.12925.1.2.0.5 |
Target Mode Port Went Offline; Port <node>:<slot>:<port> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.50 |
Node <Node_ID>, due to high temperature conditions, the storage system is being shutdown.
|
|
.1.3.6.1.4.1.12925.1.2.0.51 |
THERMAL SHUTDOWN, node: <node_id>
|
|
.1.3.6.1.4.1.12925.1.2.0.52 |
SlabUsage:: critical status=<report_status> Totals:: memory=<slab_tot_mem_kb>KB count=<slab_tot_ct> activeCount=<slab_tot_active_ct> largestUseSlabs(count=<slab_entry_ct>)::<slab_usage_entries>.
|
|
.1.3.6.1.4.1.12925.1.2.0.53 |
System Reporter threshold alert <cmp_str_data> with condition <cmp_valstr1> has been satisfied by cmp on node <cmp_valstr0> with value(s) <cmp_valstr2>.
|
|
.1.3.6.1.4.1.12925.1.2.0.54 |
System Reporter threshold alert <cpu_str_data> with condition <cpu_valstr1> has been satisfied by cpu on node <cpu_valstr0> with value(s) <cpu_valstr2>.
|
|
.1.3.6.1.4.1.12925.1.2.0.55 |
System Reporter threshold alert <link_str_data> with condition <link_valstr1> has been satisfied by link on node <link_valstr0> with value(s) <link_valstr2>.
|
|
.1.3.6.1.4.1.12925.1.2.0.56 |
CMP usage on node [[hw_node]] has exceeded <threshold>%.
|
|
.1.3.6.1.4.1.12925.1.2.0.57 |
System Reporter threshold alert <cache_str_data> with condition <cache_valstr1> has been satisfied by cache on node <cache_valstr0> with value(s) <cache_valstr2>.
|
|
.1.3.6.1.4.1.12925.1.2.0.58 |
Time-Of-Day Battery Failure; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.59 |
CPU Overheating; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.6 |
Too many initiators; Port <node>:<slot>:<port> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.60 |
Node Offline Due to Failure; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.61 |
CPU Dead; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.62 |
Node Fan Module 0 Failed; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.63 |
Node Fan Module 0 Power Fault; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.64 |
Node Fan Module 0 Under Limit; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.65 |
Node Thermal State; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.66 |
Node Fan Module 1 Failed; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.67 |
Node Fan Module 1 Power Fault; Node <node_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.68 |
Node Offline Due to Failure; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.69 |
CPU Dead; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.7 |
[[vvol]] Volume not started due to metadata inconsistency; manual check required.
|
|
.1.3.6.1.4.1.12925.1.2.0.70 |
Node Fan Module 0 Failed; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.71 |
Node Fan Module 0 Power Fault; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.72 |
Uncorrectable Memory Error; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.73 |
Node Thermal Shutdown; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.74 |
Node Fan Module 1 Failed; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.75 |
Node Fan Module 1 Power Fault; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.76 |
Multiple Uncorrectable Memory Error; Node <node_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.77 |
DC Failed; Node <node_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.78 |
Over Temperature; Node <node_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.79 |
AC Failed; Node <node_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.8 |
VV <vv_name> (<vv_id>) exceeds vlmap count threshold 80% : AR1 <count> AR5 <count> AR5_SEC <count> USR <count>
|
|
.1.3.6.1.4.1.12925.1.2.0.80 |
Fan Failed; Node <node_id> Power Supply <power_supply_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.81 |
Temperature Under Warning Threshold; Cage <cage_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.82 |
Operators Panel Failed; Cage <cage_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.83 |
Operators Panel Warning; Cage <cage_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.84 |
Unsupported Cage; Cage <cage_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.85 |
Temperature Under Warning Threshold; Cage <cage_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.86 |
Temperature Under Failure Threshold; Cage <cage_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.87 |
Temperature Over Warning Threshold; Cage <cage_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.88 |
Inaccessible; Cage <cage_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.89 |
Temperature Over Failure Threshold; Cage <cage_id> Failed (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.9 |
Flash Cache I/O times are slow on node: <node>.
|
|
.1.3.6.1.4.1.12925.1.2.0.90 |
Port Bypassed; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.91 |
Notready; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.92 |
Missing; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.93 |
Invalid connections; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.94 |
Not Available For Allocations; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.95 |
Old Firmware; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.96 |
Disabled A Port; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.97 |
Missing A Port; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.98 |
Errors on A Port; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.99 |
Prolonged Missing A Port; Disk <wwn_id> Degraded (<list of: State String {State Value}>)
|
|
.1.3.6.1.4.1.12925.1.2.0.9999 |
check snmp test alert
|
|
.1.3.6.1.4.1.12925.1.8 |
Alert notification contains details about an event that
may affect system operations and performance. The details include all columns defined in alertTable. |