TROPIC-ROE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
111

tnRoeSeqProfTable

table
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1 · 1 row entry · 12 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnRoeSeqProfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-ROE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-ROE-MIB::tnRoeSeqProfTable' 
Roe sequence number table.
tnRoeSeqProfEntry row .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1
Entry in tnRoeSeqTable table. The seq-num-profile is
used to specifie the composition of the sequence number
field in RoE header for the RoE packets. By default,
the seq-num-profile with seq-num-prof-id = 1 exist,
whi…
Indexes
Column Syntax OID
tnRoeSeqProfCardType
The card type for TPS.
TropicRoeCardType
Type Values:
1t24PS1
2t24PS2
3t12PS
4s24PS1
5s24PS2
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.1
tnRoeSeqProfPortID
tnRoeSeqProfPortID is an index into this table. It maps
this port to its entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.2
tnRoeSeqProfID
The sequency number profile id, unique within a roe
entity.
Integer32
Constraints:
range: 1-80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.3
tnRoeSeqProfDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters
(#, $, spaces, and so on), the entire string must be
e…
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.4
tnRoeSeqProfType
The type of the composition of sequence number file in
RoE header.
frmrNum - Use 28-bit (BFN,HFN,bFN) in the Sequence
number field.
Bit 0-4 are zeroes.
Bit 5-16 represents BFN.
…
Enumerationr/w
Enumerated Values:
0frmrnum
1seqnum
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.5
tnRoeSeqProfPMax
Applicable only when seq-num-type = frmrnum. It configures
the maximum numerical value of the p-counter field.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.6
tnRoeSeqProfPIncProp
Applicable only when seq-num-type = frmrnum. It configures
the method to increment the p-counter.
Enumerationr/w
Enumerated Values:
0fixed
1payloadsize
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.7
tnRoeSeqProfPInc
Applicable only when seq-num-type = frmrnum. It configures
the increment value of p-counter on every sent packet.
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.8
tnRoeSeqProfQMax
Applicable only when seq-num-type = frmrnum. It configures
the maximum numerical value of the q-counter field.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.9
tnRoeSeqProfQIncProp
Applicable only when seq-num-type = frmrnum. This command
enables to increment the q-counter.
Enumerationr/w
Enumerated Values:
0fixed
1payloadsize
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.10
tnRoeSeqProfQInc
Applicable only when seq-num-type = frmrnum. This command
enables to increment the q-counter.
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.11
tnRoeSeqProfRowStatus
The value of tnRoeEthlinkRowStatus defines the status
of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.12

tnRoeTable

table
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2 · 1 row entry · 25 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnRoeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-ROE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-ROE-MIB::tnRoeTable' 
Roe table.
tnRoeEntry row .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1
Entry in Roe table. The roe entity is automatically
created when the client interface of CPRI/OBSAI type
with the mapping type = tunneling / structure-agnostic
/ structure-aware is created. And it has one-to-one
mappi…
Indexes
Column Syntax OID
tnRoeCardType
The card type for TPS.
TropicRoeCardType
Type Values:
1t24PS1
2t24PS2
3t12PS
4s24PS1
5s24PS2
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.1
tnRoePortID
tnRoePortID is an index into this table. It maps this
port to its entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.2
tnRoeDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters
(#, $, spaces, and so on), the entire string must be
e…
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.3
tnRoeOrderInfoType
The orderInfo field in RoE header. This parameter can
be modified only when roe is shutdown.
prestime - Presentation Time filled in OrderInfo field
of RoE header.
seqnum - Sequence Number filled in O…
Enumerationr/w
Enumerated Values:
0prestime
1seqnum
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.4
tnRoePresTimeOffset
The time in the unit of 1/100 of nanosecond. 0 is a
specical value, which means the offset is automatically
adjusted by the RoE mapper based on the latency
measurement.
Integer32r/w
Constraints:
range: 0-1677721600
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.5
tnRoeCpriTxGenOffset
The time in the unit of 1/100 of nanosecond.
Applicable only when order-info-type is set to seq-num.
Specifies the offset time to start the transmission of
CPRI frames at CPRI egress. CPRI egress starts to send
CPRI fr…
OctetStringr/w
Constraints:
range: 7-7
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.6
tnRoeAutoUponChange
Enable the automatic adjustment of ts-gen-offset when the
network delay changes due to the topology change, e.g.,
protection switch. Applicable only when order-info-type
is set to seq-num. This parameter can be modifi…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.7
tnRoeSeqNumProfID
Applicable only when order-info-type is set to seq-num.
Associate a sequence number profile with the RoE entity.
This paramete can be modified only when roe is shutdown.
Integer32r/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.8
tnRoeInitialTxBFN
The BFN in the initial Hyperframe control word at CPRI
egress. Applicable only when order-info-type is set to
seq-num. It configures the bfn (BFN field in CPRI control
word) in the initial hyperframe. It can be modif…
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.9
tnRoeInitialTxHFN
HFN in the next hyperframe control word. Aplicable only
when order-info-type is set to seq-num. It specifies the
HFN in initial CPRI hyperframe control word at CPRI egress.
It can be modified only when roe is shutdown.
Integer32r/w
Constraints:
range: 0-149
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.10
tnRoeEncapMode
tunneling - 10B or 66B line codes are encapsulted
into RoE packets.
linecodeAware - CPRI basic frames in 8B or 64B
symbols removing the line coding and
(if any) scrambling and FEC, are
encapsulated into …
Enumeration
Enumerated Values:
6tunneling
7linecodeAware
8structureAware
9structureAwareControl
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.11
tnRoeAdminState
up - The administrative state is up.
down - The administrative state is down.
Enumerationr/w
Enumerated Values:
2down
3up
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.12
tnRoePmonPolicy
PMON policy id assoicated to the RoE.
Integer32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.13
tnRoeRowStatus
The value of tnRoeRowStatus defines the status of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.14
tnRoeAlmProfName
.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.15
tnRoePresTimeOffsetSubNano
The time in the unit of 1/32 of nanosecond.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.16
tnRoePresTimeOffsetNano
The time in the unit of nanosecond.
Integer32r/w
Constraints:
range: 5000-16777216
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.17
tnRoeTargetOffsetSubNano
The time in the unit of 1/32 of nanosecond for provisioned
target delay.The parameter is available only when CPRI port
is set to structure-aware mode.
Represent the provisioned target delay
- In DL path : BBU CPRI egre…
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.18
tnRoeTargetOffsetNano
The time is in the unit of nanosecond for provisioned
target delay. The parameter is available only when CPRI
port is set to structure-aware mode.
Represent the provisioned target delay
- In DL path : BBU CPRI egress …
Integer32r/w
Constraints:
range: 5000-16777216
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.19
tnRoeMapperSampleWidth
The parameter is available only when CPRI port is set to
structure-aware mode. This command configures the IQ
sample width in the CPRI link as a parameter for all data
mappers (sa-type = 0). This parameter is needed …
Integer32r/w
Constraints:
range: 4-20
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.20
tnRoeDeMapperSampleWidth
The parameter is available only when CPRI port is set to
structure-aware mode. This command configures the IQ
sample width in the CPRI link as a global parameter for
all data demappers (sa-type = 1). This parameter i…
Integer32r/w
Constraints:
range: 4-20
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.21
tnRoePPointer
The parameter is available only when CPRI port is set to
structure-aware mode. Specifies p-pointer value for
the fast C&M channel in CPRI link associated with the RoE
entity. p-pointer defines the fast C&M channel reg…
Integer32r/w
Constraints:
range: 20-63
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.24
tnRoeCpriProtocolVer
CPRI protocol version
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.25
tnRoeMapperStatusEnable
The parameter is available only when CPRI port is set
to structure-aware mode and applies to RoE entity for
a CPRI port.
When enabled:
(1) RoE entity disregards slowcm-rate, p-pointer,
protocol-version parameter…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.26
tnRoeSlowcmRate
The parameter is available only when CPRI port is set to
structure-aware mode. This command indicates rate of slow
C&M channel in CPRI link. When slow C&M is not supported
by setting <rate-id> = 0, no slow C&M RoE flo…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.27

tnRoeMapperTable

table
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3 · 1 row entry · 29 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnRoeMapperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-ROE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-ROE-MIB::tnRoeMapperTable' 
Roe Mapper table.
tnRoeMapperEntry row .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1
Entry in Roe Mapper table. It creates or edits a
mapper of structure-agnostic type when the encap-mode
of the corresponding roe is structure-agnostic. In
structure-agnostic mode, at most 1 mapper can be created
in a r…
Indexes
Column Syntax OID
tnRoeMapperCardType
The card type for TPS.
TropicRoeCardType
Type Values:
1t24PS1
2t24PS2
3t12PS
4s24PS1
5s24PS2
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.1
tnRoeMapperPortID
tnRoePortID is an index into this table. It maps this
port to its entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.2
tnRoeMapperID
Specifies the mapper id, unique within a roe entity.
1 - when structure-agnostic mode (tunneling or line-coding aware) is selected.
1..80 - when structure-aware mode is selected.

The following default map…
Integer32
Constraints:
range: 1-80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.3
tnRoeMapperDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters
(#, $, spaces, and so on), the entire string must be
e…
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.4
tnRoeMapperFlowID
This command configures the flowid used in 'flowID'
field in RoE header. flowid has no default value, and
must be specified by the user. This parameter can be
modified only when roe is shutdown.
Integer32r/w
Constraints:
range: 0-254
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.5
tnRoeMappeEtherlinkID
Specifies the ethlink id, used to configure the ethernet
frame header. This parameter has no default value. It
must be explicitly configured. This parameter can be
modified only when roe is shutdown.
Integer32r/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.6
tnRoeMapperPayloadLen
Specifies the length of the payload in RoE packets in
bytes after the RoE common header and beforeFCS.
For tunneling mode,the payload length can be 1,1.5,2,4,8
times of CPRI basic frames with line coding. For line codin…
Integer32r/w
Constraints:
range: 256-1500
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.7
tnRoeMapperSyncMode
The sync mode to control when to generate the presentation
time. Only when the basic frame number and/or bfn/hfn in
received CPRI frame matches the basic frame number and/or
bfn/hfn specified by the user based on the s…
Enumerationr/w
Enumerated Values:
0hyper
1radio
2basic
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.8
tnRoeMapperBfn
Specifies the bfn used for sync.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.9
tnRoeMapperHfn
Specifies the bfn used for sync.
Integer32r/w
Constraints:
range: 0-149
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.10
tnRoeMapperBfrm
Specifies the basic frame number used for sync.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.11
tnRoeMapperShutdown
Shutdown an RoE mapper entity. When disabled, an
entity does not change, reset, or remove any
configuration settings or statistics. RoE Mappers
must be shut down before they may be deleted. RoE
mappers are created in…
Enumerationr/w
Enumerated Values:
2shutdown
3no-shutdwn
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.12
tnRoeMapperType
The Type of the mapper: Tunneling, linecodeAware,
structureAware, structureAwareControl.
Enumeration
Enumerated Values:
6tunneling
7linecodeAware
8structureAware
9structureAwareControl
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.13
tnRoeMapperOrderInfoType
SeqNum or Presentation Time.
Enumeration
Enumerated Values:
0prestime
1seqnum
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.14
tnRoeMapperPmonPolicy
PMON policy id assoicated to the RoE Mapper.
Integer32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.15
tnRoeMapperRowStatus
The value of tnRoeMapperRowStatus defines the status
of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.16
tnRoeMapperAlmProfName
.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.17
tnRoeMapperSaType
The structure-aware mode mapper or demapper type.
<type-id> valid values:
1 = AxC data
2 = fast C&M
3 = slow C&M
4 = VSD raw (covering Ctrl_AxC and VSD)
Default values:
1 for mapper-id/demapper-id = 1 - 64
2 for map…
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.18
tnRoeMapperBwID
Specifies bw (currently covering all LTE BW). Valid
values:
1 = 1.4MHz
2 = 3MHz
3 = 5MHz
4 = 10MHz
5 = 15MHz
6 = 20MHz
This parameter can be modified only when roe is shutdown.
And the modification of this p…
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.19
tnRoeMapperPosition
Valid range based on CPRI rate parameter setting:
384..6143 for CPRI-10
160.. 2559 for CPRI-8
128..2047 for CPRI-7
64.. 1023 for CPRI-5
32.. 511 for CPRI-3
Integer32r/w
Constraints:
range: 32-6143
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.20
tnRoeMapperFrameStartOffset
The parameter is available only when
- CPRI port is set to structure-aware mode
- sa-type = 1 (for AxC data)

Specifies each AxC frame start offset relative to CPRI
10ms frame boundary.
- For hub TPS prov…
Integer32r/w
Constraints:
range: 32-6143
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.21
tnRoeMapperSchanStart
The parameter is available only when
- CPRI port is set to structure-aware mode and
- sa-type = 4 (for VSD raw)

This parameter identifies the subchannel number (Ns) in
the CPRI control word as the start o…
Integer32r/w
Constraints:
range: 4-19
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.22
tnRoeMapperSchanSize
The parameter is available only when
- CPRI port is set to structure-aware mode and
- sa-type = 4 (for VSD raw)

This parameter identifies the size of VSD raw group
in number of consecutive subchannels wit…
Integer32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.23
tnRoeMapperPincrement
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.24
tnRoeMapperNa
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.25
tnRoeMapperS
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.26
tnRoeMapperK
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.27
tnRoeMapperNc
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.28
tnRoeMapperNv
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.29

tnRoeDeMapperTable

table
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4 · 1 row entry · 30 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnRoeDeMapperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-ROE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-ROE-MIB::tnRoeDeMapperTable' 
Roe DeMapper table.
tnRoeDeMapperEntry row .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1
Entry in Roe DeMapper table. It creates or edits a
demapper of structure-agnostic type when the encap-mode
of the corresponding roe is structure-agnostic. In
structure-agnostic mode, at most 1 demapper can be
created …
Indexes
Column Syntax OID
tnRoeDeMapperCardType
The card type for TPS.
TropicRoeCardType
Type Values:
1t24PS1
2t24PS2
3t12PS
4s24PS1
5s24PS2
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.1
tnRoeDeMapperPortID
tnRoeDeMapperPortID is an index into this table. It maps
this port to its entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.2
tnRoeDeMapperID
Specifies the de-mapper id, unique within a roe entity.
1 when structure-agnostic mode (tunneling or line-coding aware) is selected
1..80 when structure-aware mode is selected

The following default dema…
Integer32
Constraints:
range: 1-80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.3
tnRoeDeMapperDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters
(#, $, spaces, and so on), the entire string must be
e…
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.4
tnRoeDeMappeEtherlinkID
Specifies the ethlink id, used to configure the ethernet
frame header. This parameter has no default value. It
must be explicitly configured. This parameter can be
modified only when roe is shutdown.
Integer32r/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.5
tnRoeDeMapperPayloadLen
Specifies the length of the payload in RoE packets in bytes
after the RoE common header and before FCS. For tunneling mode,
the payload length can be 1,1.5,2,4,8 times of CPRI basic frames
with line coding. For line cod…
Integer32r/w
Constraints:
range: 256-1500
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.6
tnRoeDeMapperSyncMode
This command configures the sync mode to control when to
generate the presentation time. Only when the basic frame
number and/or bfn/hfn in received CPRI frame matches the
basic frame number and/or bfn/hfn specified by…
Enumerationr/w
Enumerated Values:
0hyper
1radio
2basic
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.7
tnRoeDeMapperBfn
Specifies the bfn used for sync.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.8
tnRoeDeMapperHfn
Specifies the bfn used for sync.
Integer32r/w
Constraints:
range: 0-149
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.9
tnRoeDeMapperBfrm
Specifies the basic frame number used for sync.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.10
tnRoeDeMapperJitterBufferDepth
Specifies the basic frame number used for sync.
Integer32r/w
Constraints:
range: 8-128
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.11
tnRoeDeMapperShutdown
This command administratively disables an RoE mapper
entity. When disabled, an entity does not change, reset,
or remove any configuration settings or statistics. RoE
mappers must be shut down before they may be delete…
Enumerationr/w
Enumerated Values:
2shutdown
3no-shutdwn
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.12
tnRoeDeMapperType
The Type of the mapper: Tunneling, linecodeAware,
structureAwareControl.
Enumeration
Enumerated Values:
6tunneling
7linecodeAware
8structureAware
9structureAwareControl
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.13
tnRoeDeMapperFlowID
The flowid used in 'flowID' field in RoE header.
Integer32
Constraints:
range: 0-254
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.14
tnRoeDeMapperOrderInfoType
The flowid used in 'flowID' field in RoE header.
Enumeration
Enumerated Values:
0prestime
1seqnum
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.15
tnRoeDeMapperPmonPolicy
PMON policy id assoicated to the RoE DeMapper.
Integer32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.16
tnRoeDeMapperRowStatus
The value of tnRoeMapperRowStatus defines the status
of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.17
tnRoeDeMapperAlmProfName
.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.18
tnRoeDeMapperSaType
The structure-aware mode mapper or demapper type.
<type-id> valid values:
1 = AxC data
2 = fast C&M
3 = slow C&M
4 = VSD raw (covering Ctrl_AxC and VSD)

Default value:
1 for mapper-id/demapper-i…
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.19
tnRoeDeMapperBwID
Specifies bw (currently covering all LTE BW). Valid
values:
1 = 1.4MHz
2 = 3MHz
3 = 5MHz
4 = 10MHz
5 = 15MHz
6 = 20MHz
This parameter can be modified only when roe is shutdown.
And the modification of this p…
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.20
tnRoeDeMapperPosition
Valid range based on CPRI rate parameter setting:
384..6143 for CPRI-10
160.. 2559 for CPRI-8
128..2047 for CPRI-7
64.. 1023 for CPRI-5
32.. 511 for CPRI-3
Integer32r/w
Constraints:
range: 32-6143
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.21
tnRoeDeMapperFrameStartOffset
The parameter is available only when
- CPRI port is set to structure-aware mode
- sa-type = 1 (for AxC data)

Specifies each AxC frame start offset relative to CPRI
10ms frame boundary.
- For hub TPS prov…
Integer32r/w
Constraints:
range: 32-6143
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.22
tnRoeDeMapperSchanStart
The parameter is available only when
- CPRI port is set to structure-aware mode and
- sa-type = 4 (for VSD raw)

This parameter identifies the subchannel number (Ns) in
the CPRI control word as the start o…
Integer32r/w
Constraints:
range: 4-19
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.23
tnRoeDeMapperSchanSize
The parameter is available only when
- CPRI port is set to structure-aware mode and
- sa-type = 4 (for VSD raw)

This parameter identifies the size of VSD raw group in
number of consecutive subchannels wit…
Integer32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.24
tnRoeDeMapperPincrement
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.25
tnRoeDeMapperNa
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.26
tnRoeDeMapperS
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.27
tnRoeDeMapperK
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.28
tnRoeDeMapperNc
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.29
tnRoeDeMapperNv
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.30

tnRoeEthlinkTable

table
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5 · 1 row entry · 15 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnRoeEthlinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-ROE-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-ROE-MIB::tnRoeEthlinkTable' 
Roe Eth Link table.
tnRoeEthlinkEntry row .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1
Entry in Roe DeMapper table. It creates or edits an
ethlink entity, which specifies the Ethernet frame header
for the RoE packets. The ethlink ID is unique within the
RoE entity. When a ethlink is created, the create…
Indexes
Column Syntax OID
tnRoeEthlinkCardType
tnRoeEthlinkCardType is an index into this table. It
specify the card type for TPS.
TropicRoeCardType
Type Values:
1t24PS1
2t24PS2
3t12PS
4s24PS1
5s24PS2
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.1
tnRoeEthlinkPortID
tnRoeEthlinkPortID is an index into this table. It maps
this port to its entry in the mib-2 interfaces table.
TN-TC-MIBTmnxPortID .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.2
tnRoeEthlinkID
Specifies the ethlink id, unique within a roe entity.
1..2 when non-structure-aware mode is selected
1..16 when structure-aware mode is selected.
Integer32
Constraints:
range: 1-80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.3
tnRoeEthlinkDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters
(#, $, spaces, and so on), the entire string must be
e…
TN-TC-MIBTItemDescriptionr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.4
tnRoeEthlinkDestMac
Specifies the 48-bit MAC address. Allowed values are any
non-broadcast, non-multicast MAC and non-IEEE reserved MAC
addresses.
{xx:xx:xx:xx:xx:xx | xx-xx-xx-xx-xx-xx} - MAC address,
where xx is hexadecimal numbers.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.5
tnRoeEthlinkSourceMac
Specifies the 48-bit MAC address of the port. Allowed
values are any non-broadcast, non-multicast MAC and
non-IEEE reserved MAC addresses.
{xx:xx:xx:xx:xx:xx | xx-xx-xx-xx-xx-xx} - MAC address,
where xx is hexadeci…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.6
tnRoeEthlinkTagDepth
The number of VLAN tags used in the Ethernet frame header.
Enumerationr/w
Enumerated Values:
0untagged
1single
2double
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.7
tnRoeEthlinkOuterEthertype
The ethertype for the outer tag when double tags are used
in Ethernet Frame header, i.e., tag-depth is double.
Integer32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.8
tnRoeEthlinkOuterVid
The VLAN ID of the outer VLAN tag in Ethernet Frame Header
if double tag is used, i.e., tag-depth is double.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.9
tnRoeEthlinkOuterPri
Specifies the priority of the outer VLAN tag in Ethernet
Frame Header if double tag is used, i.e., tag-depth is
double.

Default: 7.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.10
tnRoeEthlinkInnerEthertype
The ethertype for the inner tag when single or double
tags are used in Ethernet Frame header, i.e., tag-depth
is single or double.
Integer32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.11
tnRoeEthlinkInnerVid
The VLAN ID of the inner VLAN tag in Ethernet Frame Header
if either single or double tag is used, i.e., tag-depth is
single or double.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.12
tnRoeEthlinkInnerPri
The priority of the inner VLAN tag in Ethernet Frame Header
if single or double tag is used, i.e., tag-depth is single
or double.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.13
tnRoeEthlinkEthertype
The ethertype for RoE PDU.
Integer32r/w
Constraints:
range: 1536-65535
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.14
tnRoeEthlinkRowStatus
The value of tnRoeEthlinkRowStatus defines the status of
the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.15