TRIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
9
Rows
9
Columns
77

tripCfgTable

table
.1.3.6.1.2.1.116.1.1 · 1 row entry · 14 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripCfgTable'
This table contains the common configuration objects
applicable to all TRIP applications referenced by the
applIndex.  Each row represents those objects for a
particular TRIP LS present in this system. The
instances of TRIP LS's are uniquely identified by the
applIndex. The objects in this table SHOULD be
nonVolatile and survive a reboot.
tripCfgEntry row .1.3.6.1.2.1.116.1.1.1
A row of common configuration.
Column Syntax OID
This object will reflect the version of TRIP
supported by this system. It follows the same
format as TRIP version information contained
in the TRIP messages generated by this TRIP entity.
TRIP-TC-MIBTripProtocolVersion
Type Constraints:
range: 1..255
.1.3.6.1.2.1.116.1.1.1.1
The Internet Telephony Administrative domain (ITAD)
of this LS.
TRIP-TC-MIBTripItadr/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.1.1.2
The object that identifies this TRIP Client.
TRIP-TC-MIBTripId
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.1.1.3
The desired TRIP state.

up(1) : Set the application to normal operation.

down(2): Set the application to a state where it will
not process TRIP messages.

Setting th…
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.2.1.116.1.1.1.4
The current operational state of the TRIP protocol.

unknown(0): The operating status of the application is
unknown.

up(1): The application is operating normally, and
Enumeration
Enumerated Values:
0unknown
1up
2down
3faulty
.1.3.6.1.2.1.116.1.1.1.5
The type of Inet Address of the tripAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.2.1.116.1.1.1.6
The network address of the local LS that the peer
connects to. The type of address depends on the object
tripCfgAddrIAddrType. The type of this address is
determined by the value of the
tripCfgAddrIAddrType object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.2.1.116.1.1.1.7
The local tcp/udp port on the local LS that the peer
connects to.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.2.1.116.1.1.1.8
The minimum amount of time that MUST elapse between
advertisement of the update message that reports changes
within the LS's own ITAD.
SecondsUnsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.1.1.9
Specifies minimal interval between successive
advertisements to a particular destination from an LS.
SecondsUnsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.1.1.10
Indicates the interval that the LS MUST maintain routes
marked as withdrawn in its database.
SecondsUnsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.1.1.11
Indicates the interval that the TRIP module of the
LS MUST be disabled while routes originated by this
LS with high sequence numbers can be removed.
SecondsUnsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.1.1.12
The operational mode of the TRIP entity running on this
system.
TRIP-TC-MIBTripSendReceiveMode
Type Values:
1sendReceive
2sendOnly
3receiveOnly
.1.3.6.1.2.1.116.1.1.1.13
The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access
to any columnar objects in the row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.2.1.116.1.1.1.14
.1.3.6.1.2.1.116.1.2 · 1 row entry · 6 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripRouteTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripRouteTypeTable'
The TRIP peer Route Type table contains one entry per
supported protocol - address family pair.  The objects in
this table are volatile and are refreshed after a reboot.
tripRouteTypeEntry row .1.3.6.1.2.1.116.1.2.1
An entry containing information about the route type
that a particular TRIP entity supports. Each entry
represents information about either the local or a remote
LS peer. The object tripRouteTypePeer is used to
disting…
Column Syntax OID
The type of Inet Address of the tripRouteTypeAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.2.1.116.1.2.1.1
The network address of this entry's TRIP peer LS. The
type of this address is determined by the value of the
tripRouteTypeAddrInetType object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.2.1.116.1.2.1.2
The port for the TCP connection between this and
an associated TRIP peer.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.2.1.116.1.2.1.3
The object identifier of a protocol that the associated
peer is using.
TRIP-TC-MIBTripAppProtocol
Type Values:
1sip
2q931
3ras
4annexG
255other
.1.3.6.1.2.1.116.1.2.1.4
The object identifier of an address family that the
associated peer belongs to.
TRIP-TC-MIBTripAddressFamily
Type Values:
1decimal
2pentadecimal
3e164
255other
.1.3.6.1.2.1.116.1.2.1.5
This object identifies whether this entry is

associated with a 'local' or 'remote' LS peer.
Enumeration
Enumerated Values:
1local
2remote
.1.3.6.1.2.1.116.1.2.1.6
.1.3.6.1.2.1.116.1.3 · 1 row entry · 4 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripSupportedCommunityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripSupportedCommunityTable'
The list of TRIP communities that this LS supports. A
TRIP community is a group of destinations that share
common properties.
          
The TRIP Supported Communities entry is used to group
destinations so that the routing decision can be based
on the identity of the group.
tripSupportedCommunityEntry row .1.3.6.1.2.1.116.1.3.1
Entry containing information about a community. A TRIP
community is a group of destinations that share some
common property. This attribute is used so that routing
decisions can be based on the identity of the group.
Column Syntax OID
The identifier of the supported Community.
TRIP-TC-MIBTripCommunityId
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.3.1.1
The ITAD of the community.
TRIP-TC-MIBTripItadr/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.3.1.2
The storage type for this conceptual row. Conceptual
rows having the value 'permanent' need not allow write-
access to any columnar objects in the row. It is not a
requirement that this storage be non volatile.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.2.1.116.1.3.1.3
The row status of the entry. This object is REQUIRED
to create or delete rows by a manager. A value for
tripSupportedCommunityItad MUST be set for row creation
to be successful. If the instance already exists for a
part…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.2.1.116.1.3.1.4
.1.3.6.1.2.1.116.1.4 · 1 row entry · 20 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripPeerTable'
The TRIP peer table. This table contains one entry per
TRIP peer, and information about the connection with
          
the peer.
tripPeerEntry row .1.3.6.1.2.1.116.1.4.1
Entry containing information about the connection with
a TRIP peer.

Implementation need to be aware that if the size of
tripPeerRemoteAddr exceeds 113 sub-IDs, then OIDs of
column instances in this table wi…
Column Syntax OID
The type of Inet Address of the tripPeerRemoteAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.2.1.116.1.4.1.1
The IP address of this entry's TRIP peer LS. The type of
this address is determined by the value of the
tripPeerRemoteAddrInetType object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.2.1.116.1.4.1.2
The remote port for the TCP connection between the
TRIP peers.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.2.1.116.1.4.1.3
TRIP identifier of the peer.
TRIP-TC-MIBTripId
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.4.1.4
TRIP Peer Finite State Machine state.

idle(1) : The initial state. Local LS refuses all
incoming connections. No application
resources are allocated to processing
Enumeration
Enumerated Values:
1idle
2connect
3active
4openSent
5openConfirm
6established
.1.3.6.1.2.1.116.1.4.1.5
This object is used to affect the TRIP connection
state.

up(1) : Allow a connection with the peer LS.

down(2) : disconnect the connection from the peer LS and
do not allow any f…
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.2.1.116.1.4.1.6
The negotiated version of TRIP running between this
local entity and this peer.
TRIP-TC-MIBTripProtocolVersion
Type Constraints:
range: 1..255
.1.3.6.1.2.1.116.1.4.1.7
The operational mode of this peer.
TRIP-TC-MIBTripSendReceiveMode
Type Values:
1sendReceive
2sendOnly
3receiveOnly
.1.3.6.1.2.1.116.1.4.1.8
The Internet Telephony Administrative domain of
this peer.
TRIP-TC-MIBTripItad
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.4.1.9
Specifies the initial amount of time that will elapse
between connection retry. This value SHOULD double
after each attempt up to the value of
tripPeerMaxRetryInterval. This value MUST always be less
than or equal to th…
SecondsUnsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.2.1.116.1.4.1.10
Specifies the maximum amount of time that will elapse
between connection retries. Once the value of
tripPeerConnectRetryInterval has reached this value, no
more retries will be attempted. Attempts to set this
value lowe…
SecondsUnsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.2.1.116.1.4.1.11
The time interval in seconds for the hold timer that
is established with the peer. The value of this object
is the smaller of the values in
tripPeerHoldTimeConfigured and the hold time received
in the open message.
SecondsUnsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.4.1.12
Specifies the amount of time that MUST elapse between
keep alive messages. This value is negotiated with the
remote when a connection is established.
SecondsUnsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.4.1.13
Specifies the maximum time that MAY elapse between the
receipt of successive keepalive or update message. A value
of 0 means that keepalive or update messages will not be

sent.
SecondsUnsigned32r/w
Constraints:
range: 3-65535
range: 0-0
.1.3.6.1.2.1.116.1.4.1.14
Specifies the amount of time that MUST elapse between
keep alive messages.
SecondsUnsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.4.1.15
Indicates the interval that the LS MUST maintain routes
marked as withdrawn in its database.
SecondsUnsigned32r/w
Constraints:
range: 1-65535
.1.3.6.1.2.1.116.1.4.1.16
Indicate the interval that the TRIP module of the remote
peer LS MUST be disabled while routes originated by the
local LS with high sequence numbers can be removed.
SecondsUnsigned32r/w
Constraints:
range: 1-65535
.1.3.6.1.2.1.116.1.4.1.17
Indicates whether this entry was learned or
configured.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.116.1.4.1.18
The storage type for this conceptual row. Conceptual
rows having the value 'permanent' need not allow write-
access to any columnar objects in the row. It is not a
requirement that this storage be non volatile.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.2.1.116.1.4.1.19
The row status of the entry. This object is REQUIRED to
create or delete rows remotely by a manager. If the
instance already exists for a particular applIndex, the
row create operation will fail.

The valu…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.2.1.116.1.4.1.20
.1.3.6.1.2.1.116.1.5 · 1 row entry · 8 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripPeerStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripPeerStatisticsTable'
The TRIP peer stats table. This table contains one
entry per remote TRIP peer, and statistics related to the
connection with the remote peer. The objects in this
table are volatile.
tripPeerStatisticsEntry row .1.3.6.1.2.1.116.1.5.1
Entry containing information about the connection with
a TRIP peer.
Indexes
No indexes recorded
Column Syntax OID
The number of TRIP update messages received from this
remote peer since the last restart of this location
server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.5.1.1
The number of TRIP update messages sent to this remote
peer since the last restart of this LS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.5.1.2
The total number of TRIP messages received from the
remote peer on this connection since the last restart
of this LS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.5.1.3
The total number of outgoing TRIP messages sent to the
remote peer since the last restart of this LS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.5.1.4
The number of times the remote peer has transitioned
into the established state since the last restart of this
LS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.5.1.5
Indicates the time and date that this remote peer entered
the 'established' state.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.2.1.116.1.5.1.6
Elapsed time in hundredths of seconds since the last
TRIP update message was received from this remote peer.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
.1.3.6.1.2.1.116.1.5.1.7
The value of sysUpTime when the last state change of
tripPeerState took place.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.2.1.116.1.5.1.8
.1.3.6.1.2.1.116.1.6 · 1 row entry · 20 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripRouteTable'
The TRIP route table containing information about
reachable routes that are to be added to service by the
receiving LS. The objects in this table are volatile
and are refreshed when this LS rediscovers its route
table.
tripRouteEntry row .1.3.6.1.2.1.116.1.6.1
Information about a route to a called destination.
Column Syntax OID
The protocol for which this entry of the routing table
is maintained.
TRIP-TC-MIBTripAppProtocol
Type Values:
1sip
2q931
3ras
4annexG
255other
.1.3.6.1.2.1.116.1.6.1.1
Specifies the type of address for the destination
route.
TRIP-TC-MIBTripAddressFamily
Type Values:
1decimal
2pentadecimal
3e164
255other
.1.3.6.1.2.1.116.1.6.1.2
This is the address (prefix) of the family type given
by Address Family of the destination. It is the prefix
of addresses reachable from this gateway via the next
hop server. The SIZE value of 105 has been assigned due
OctetString
Constraints:
range: 1-105
.1.3.6.1.2.1.116.1.6.1.3
The identifier of the peer where the route information
was learned.
TRIP-TC-MIBTripId
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.6.1.4
Indicates which Telephony Routing Information Base (TRIB)
this entry belongs to. This is
a bit-map of possible types. If the bit has a value of
1, then the entry is a member of the corresponding TRIB
type. If the bit ha…
Bits
Enumerated Values:
0adjTribIns
1extTrib
2locTrib
3adjTribOut
.1.3.6.1.2.1.116.1.6.1.5
Indicates the version of the destination route
originated by the LS identified by
tripRouteAddressOriginatorId intra-domain attribute.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.6.1.6
This is an intra-domain attribute indicating the
internal LS that originated the route into the ITAD.
TRIP-TC-MIBTripId
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.6.1.7
The type of Inet Address of the tripRouteNextHopServer.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.2.1.116.1.6.1.8
Indicates the next hop that messages of a given protocol
destined for tripRouteAddress SHOULD be sent to. The type
of this address is determined by the value of the
tripRouteNextHopServerIAddrType object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.2.1.116.1.6.1.9
The port of the next hop server that this route
will use.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.2.1.116.1.6.1.10
Indicates the domain of the next hop.
TRIP-TC-MIBTripItad
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.6.1.11
The Multiple Exit Discriminator allows an LS to
discriminate between, and indicate preference for,
otherwise similar routes to a neighbouring domain.
A higher value represents a more preferred routing
object.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.2.1.116.1.6.1.12
Indicated the local LS's degree of preference for an
advertised route destination.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.2.1.116.1.6.1.13
Identifies the sequence of domains through which this
advertisement has passed.

This object is probably best represented as sequence of
TripItads. For SMI compatibility, though, it is
represented as an OC…
OctetString
Constraints:
range: 4-252
.1.3.6.1.2.1.116.1.6.1.14
Identifies the ITADs through which messages sent using
this route would pass. These are a subset of
tripRouteAdvertisementPath.

This object is probably best represented as sequence of
TripItads. For SMI c…
OctetString
Constraints:
range: 4-252
.1.3.6.1.2.1.116.1.6.1.15
Indicates that a route MAY traverse domains not listed
in tripRouteRoutedPath. If an LS selects the less
specific route from a set of overlapping routes, then
this value returns TRUE.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.116.1.6.1.16
This object contains one or more attributes that were not
understood, and because they were transitive, were dropped
during aggregation. They take the format of a triple
<attribute type, attribute length, attribute valu…
OctetString
Constraints:
range: 0-255
.1.3.6.1.2.1.116.1.6.1.17
Indicates if this route is to be removed from service
by the receiving LS.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.116.1.6.1.18
Indicates if this route has been converted to a
different application protocol than it had originally.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.116.1.6.1.19
The value of sysUpTime when this route was received.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.2.1.116.1.6.1.20
.1.3.6.1.2.1.116.1.7 · 1 row entry · 2 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripRouteCommunityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripRouteCommunityTable'
A table containing a list of TRIP communities associated
with a route. Each instance of tripRouteTypeEntry that has
the tripRouteTypePeer object set to remote(2) has an
instance in the tripRouteTable as a parent. The objects
in this table are volatile and are refreshed after a
reboot.
tripRouteCommunityEntry row .1.3.6.1.2.1.116.1.7.1
Information about communities associated with a route.
An entry with a tripRouteAddress of 00 and a
tripRoutePeer of 0 refers to the local LS.
Column Syntax OID
The community identifier.
TRIP-TC-MIBTripCommunityId
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.7.1.1
The ITAD associated with this community.
TRIP-TC-MIBTripItad
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.7.1.2
.1.3.6.1.2.1.116.1.8 · 1 row entry · 2 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripItadTopologyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripItadTopologyTable'
The sequence of link connections between peers within an
ITAD. The objects in this table are volatile and are
refreshed after a reboot.
tripItadTopologyEntry row .1.3.6.1.2.1.116.1.8.1
Information about a peer of the LS identified by
tripItadTopologyOrigId.
Column Syntax OID
Indicates the internal LS that originated the ITAD
topology information into the ITAD.
TRIP-TC-MIBTripId
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.8.1.1
Indicates the version of the ITAD topology originated
by the LS identified by tripItadTopologyOrigId.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.116.1.8.1.2
.1.3.6.1.2.1.116.1.9 · 1 row entry · 1 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk tripItadTopologyIdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRIP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRIP-MIB::tripItadTopologyIdTable'
The list of other LS's within the ITAD domain that the
LS identified by tripItadTopologyOrigId is currently
peering. Each instance of tripItadTopologyIdEntry has an
instance in the tripItadTopologyTable as a parent. The
objects in this table are volatile and are refreshed
after a reboot.
tripItadTopologyIdEntry row .1.3.6.1.2.1.116.1.9.1
Information about a peer to the LS identified by
tripItadTopologyOrigId.
Column Syntax OID
The index into this entry. Indicates the other location
servers within the ITAD domain that this LS identified
by tripItadTopologyOrigId is currently peering.
TRIP-TC-MIBTripId
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.116.1.9.1.1