TPT-TPA-HARDWARE-MIB Table View

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.1.1.1

slotPort

Port number for this hardware element (0 refers to the board).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.1.1.2

slotType

Type of hardware element corresponding to slot/port.

Type Values:

0	unequip
1	chassis
2	backplane
3	controller
4	network-interface
5	network-interface-bcomm
6	network-processor
7	feature-card
8	gige-port
9	ten-base-t-port
10	hundred-base-t-port
11	sonet-atm-port
12	sonet-pos-port
13	sonet-pos-srp-port
14	sdh-atm-port
15	sdh-pos-port
16	sdh-pos-srp-port
17	power-supply
18	power-supply-sub-unit
19	fan-controller
20	fan-sub-unit
21	power-entry-module
22	vnam-port
23	ten-gige-port
24	forty-gige-port

.1.3.6.1.4.1.10734.3.3.2.3.1.1.3

slotCfgType

The configuration/redundancy of a hardware element.

Type Values:

0	unconfigured
1	simplex
2	duplex
3	loadshare
4	autonomous

.1.3.6.1.4.1.10734.3.3.2.3.1.1.4

slotRunState

The high-level hardware state (active, initializing, standby, etc.).

Type Values:

0	oos
1	initialize
2	act
3	stby
4	dgn
5	lpbk
6	act-faf
7	stby-faf
8	act-dgrd
9	stby-dgrd

.1.3.6.1.4.1.10734.3.3.2.3.1.1.5

slotQualifier1

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.1.1.6

slotQualifier2

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.1.1.7

slotQualifier3

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.1.1.8

slotQualifier4

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.1.1.9

slotStartTime

The time (seconds) at which this hardware element was powered up.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.1.1.10

slotVendorID

The identifying number of the vendor of this hardware.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.1.1.11

slotDeviceID

The PCI bus device ID for this slot.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.1.1.12

slotProductID

Versioning and other inventory information for this hardware element.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10734.3.3.2.3.1.1.13

slotFPGAVersion

The version of the TPT FPGA chip on this hardware.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.1.1.14

slotInterface

The entry in the IF-MIB interface table that corresponds to this port.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.10734.3.3.2.3.1.1.15

slotLineType

The line type (e.g., copper or optical) of the port.

LineType

Type Values:

0	undefined
21	copper
22	optical
23	copper-sfp

.1.3.6.1.4.1.10734.3.3.2.3.1.1.16

slotDuplexState

The current duplex state (full or half) of the port.

DuplexState

Type Values:

0	unknown
1	half
2	full

.1.3.6.1.4.1.10734.3.3.2.3.1.1.17

slotPhysical

Physical port number for this hardware element (0 if not a port).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.1.1.18

slotSfpQualifier1

Type of the SFP transceiver

SfpQualifier

Type Values:

0	sfp-not-applicable
1	sfp-10g-base-er
2	sfp-10g-base-lrm
3	sfp-10g-base-lr
4	sfp-10g-base-sr
5	sfp-base-px
6	sfp-base-bx10
7	sfp-100base-fx
8	sfp-100base-lx-lx10
9	sfp-1000base-t
10	sfp-1000base-cx
11	sfp-1000base-lx
12	sfp-1000base-sx
13	sfp-850-nm-vcsel
14	sfp-1310-nm-vcsel
15	sfp-1550-nm-vcsel
16	sfp-1310-nm-fp
17	sfp-1310-nm-dfb
18	sfp-1550-nm-dfb
19	sfp-1310-nm-eml
20	sfp-1550-nm-eml
21	sfp-copper-or-others
22	sfp-1490-nm-dfb
23	sfp-copper-cable-unequalized
24	sfp-absent
25	sfp-plus-absent
26	qsfp-plus-absent
27	sfp-xfp-absent
28	sfp-10g-dac
29	sfp-10g-dao

.1.3.6.1.4.1.10734.3.3.2.3.1.1.19

slotSfpQualifier2

Type of the SFP transceiver. This is applicable to the dual speed
transceivers, and this variable will have value of the second speed
supported by those transceivers. For single-speed transceivers, the
value will be not…

SfpQualifier

Type Values:

0	sfp-not-applicable
1	sfp-10g-base-er
2	sfp-10g-base-lrm
3	sfp-10g-base-lr
4	sfp-10g-base-sr
5	sfp-base-px
6	sfp-base-bx10
7	sfp-100base-fx
8	sfp-100base-lx-lx10
9	sfp-1000base-t
10	sfp-1000base-cx
11	sfp-1000base-lx
12	sfp-1000base-sx
13	sfp-850-nm-vcsel
14	sfp-1310-nm-vcsel
15	sfp-1550-nm-vcsel
16	sfp-1310-nm-fp
17	sfp-1310-nm-dfb
18	sfp-1550-nm-dfb
19	sfp-1310-nm-eml
20	sfp-1550-nm-eml
21	sfp-copper-or-others
22	sfp-1490-nm-dfb
23	sfp-copper-cable-unequalized
24	sfp-absent
25	sfp-plus-absent
26	qsfp-plus-absent
27	sfp-xfp-absent
28	sfp-10g-dac
29	sfp-10g-dao

.1.3.6.1.4.1.10734.3.3.2.3.1.1.20

hw-chasTable

table

.1.3.6.1.4.1.10734.3.3.2.3.2 · 1 row entry · 13 columns

Open in standard view

Uses the trendmicro variant from /opt/observium/mibs/trendmicro.

Command help

Walk hw-chasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPT-TPA-HARDWARE-MIB' -M '/opt/observium/mibs/trendmicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPT-TPA-HARDWARE-MIB::hw-chasTable'

Table of chassis data for the device.  Represented as a table with one 
row, and that row is the same as that for other managed elements.

hw-chasEntry row .1.3.6.1.4.1.10734.3.3.2.3.2.1

An entry in the chassis table.
Rows cannot be created or deleted.

Indexes

chasNumber

Column Syntax OID

chasNumber

Number for this entry in the chassis table. Should always be 0.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.2.1.1

chasType

Type of hardware element -- should always be chassis or unequip.

Type Values:

0	unequip
1	chassis
2	backplane
3	controller
4	network-interface
5	network-interface-bcomm
6	network-processor
7	feature-card
8	gige-port
9	ten-base-t-port
10	hundred-base-t-port
11	sonet-atm-port
12	sonet-pos-port
13	sonet-pos-srp-port
14	sdh-atm-port
15	sdh-pos-port
16	sdh-pos-srp-port
17	power-supply
18	power-supply-sub-unit
19	fan-controller
20	fan-sub-unit
21	power-entry-module
22	vnam-port
23	ten-gige-port
24	forty-gige-port

.1.3.6.1.4.1.10734.3.3.2.3.2.1.3

chasCfgType

The configuration/redundancy of a hardware element.

Type Values:

0	unconfigured
1	simplex
2	duplex
3	loadshare
4	autonomous

.1.3.6.1.4.1.10734.3.3.2.3.2.1.4

chasRunState

The high-level hardware state (active, initializing, standby, etc.).

Type Values:

0	oos
1	initialize
2	act
3	stby
4	dgn
5	lpbk
6	act-faf
7	stby-faf
8	act-dgrd
9	stby-dgrd

.1.3.6.1.4.1.10734.3.3.2.3.2.1.5

chasQualifier1

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.2.1.6

chasQualifier2

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.2.1.7

chasQualifier3

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.2.1.8

chasQualifier4

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.2.1.9

chasStartTime

The time (seconds) at which the hardware element was powered up.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.2.1.10

chasVendorID

The identifying number of the vendor of this hardware.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.2.1.11

chasDeviceID

An identifying number specific to this device.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.2.1.12

chasProductID

Versioning and other inventory information for this hardware element.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10734.3.3.2.3.2.1.13

chasFPGAVersion

The version of the TPT FPGA chip on this hardware.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.2.1.14

hw-fanTable

table

.1.3.6.1.4.1.10734.3.3.2.3.3 · 1 row entry · 13 columns

Open in standard view

Uses the trendmicro variant from /opt/observium/mibs/trendmicro.

Command help

Walk hw-fanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPT-TPA-HARDWARE-MIB' -M '/opt/observium/mibs/trendmicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPT-TPA-HARDWARE-MIB::hw-fanTable'

Table of fans on the device.

hw-fanEntry row .1.3.6.1.4.1.10734.3.3.2.3.3.1

An entry in the fan table.
Rows cannot be created or deleted.

Indexes

fanSubunit

Column Syntax OID

fanSubunit

Number of fan sub-unit (0 for controller).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.3.1.1

fanType

Type of hardware element -- should always be fan or unequip.

Type Values:

0	unequip
1	chassis
2	backplane
3	controller
4	network-interface
5	network-interface-bcomm
6	network-processor
7	feature-card
8	gige-port
9	ten-base-t-port
10	hundred-base-t-port
11	sonet-atm-port
12	sonet-pos-port
13	sonet-pos-srp-port
14	sdh-atm-port
15	sdh-pos-port
16	sdh-pos-srp-port
17	power-supply
18	power-supply-sub-unit
19	fan-controller
20	fan-sub-unit
21	power-entry-module
22	vnam-port
23	ten-gige-port
24	forty-gige-port

.1.3.6.1.4.1.10734.3.3.2.3.3.1.3

fanCfgType

The configuration/redundancy of a hardware element.

Type Values:

0	unconfigured
1	simplex
2	duplex
3	loadshare
4	autonomous

.1.3.6.1.4.1.10734.3.3.2.3.3.1.4

fanRunState

The high-level hardware state (active, initializing, standby, etc.).

Type Values:

0	oos
1	initialize
2	act
3	stby
4	dgn
5	lpbk
6	act-faf
7	stby-faf
8	act-dgrd
9	stby-dgrd

.1.3.6.1.4.1.10734.3.3.2.3.3.1.5

fanQualifier1

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.3.1.6

fanQualifier2

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.3.1.7

fanQualifier3

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.3.1.8

fanQualifier4

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.3.1.9

fanStartTime

The time (seconds) at which the hardware element was powered up.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.3.1.10

fanVendorID

The identifying number of the vendor of this hardware.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.3.1.11

fanDeviceID

An identifying number specific to this device.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.3.1.12

fanProductID

Versioning and other inventory information for this hardware element.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10734.3.3.2.3.3.1.13

fanFPGAVersion

The version of the TPT FPGA chip on this hardware.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.3.1.14

hw-psTable

table

.1.3.6.1.4.1.10734.3.3.2.3.4 · 1 row entry · 13 columns

Open in standard view

Uses the trendmicro variant from /opt/observium/mibs/trendmicro.

Command help

Walk hw-psTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPT-TPA-HARDWARE-MIB' -M '/opt/observium/mibs/trendmicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPT-TPA-HARDWARE-MIB::hw-psTable'

Table of power supplies on the device.

hw-psEntry row .1.3.6.1.4.1.10734.3.3.2.3.4.1

An entry in the power supply table.
Rows cannot be created or deleted.

Indexes

psSubunit

Column Syntax OID

psSubunit

Number of power supply sub-unit (0 for controller).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.4.1.1

psType

Type of hardware element -- should always be power-supply or unequip.

Type Values:

0	unequip
1	chassis
2	backplane
3	controller
4	network-interface
5	network-interface-bcomm
6	network-processor
7	feature-card
8	gige-port
9	ten-base-t-port
10	hundred-base-t-port
11	sonet-atm-port
12	sonet-pos-port
13	sonet-pos-srp-port
14	sdh-atm-port
15	sdh-pos-port
16	sdh-pos-srp-port
17	power-supply
18	power-supply-sub-unit
19	fan-controller
20	fan-sub-unit
21	power-entry-module
22	vnam-port
23	ten-gige-port
24	forty-gige-port

.1.3.6.1.4.1.10734.3.3.2.3.4.1.3

psCfgType

The configuration/redundancy of a hardware element.

Type Values:

0	unconfigured
1	simplex
2	duplex
3	loadshare
4	autonomous

.1.3.6.1.4.1.10734.3.3.2.3.4.1.4

psRunState

The high-level hardware state (active, initializing, standby, etc.).

Type Values:

0	oos
1	initialize
2	act
3	stby
4	dgn
5	lpbk
6	act-faf
7	stby-faf
8	act-dgrd
9	stby-dgrd

.1.3.6.1.4.1.10734.3.3.2.3.4.1.5

psQualifier1

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.4.1.6

psQualifier2

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.4.1.7

psQualifier3

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.4.1.8

psQualifier4

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.4.1.9

psStartTime

The time (seconds) at which the hardware element was powered up.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.4.1.10

psVendorID

The identifying number of the vendor of this hardware.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.4.1.11

psDeviceID

An identifying number specific to this device.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.4.1.12

psProductID

Versioning and other inventory information for this hardware element.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.10734.3.3.2.3.4.1.13

psFPGAVersion

The version of the TPT FPGA chip on this hardware.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.4.1.14

hw-pemTable

table

.1.3.6.1.4.1.10734.3.3.2.3.5 · 1 row entry · 13 columns

Open in standard view

Uses the trendmicro variant from /opt/observium/mibs/trendmicro.

Command help

Walk hw-pemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPT-TPA-HARDWARE-MIB' -M '/opt/observium/mibs/trendmicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPT-TPA-HARDWARE-MIB::hw-pemTable'

Table of power entry modules on the device.

hw-pemEntry row .1.3.6.1.4.1.10734.3.3.2.3.5.1

An entry in the power supply table.
Rows cannot be created or deleted.

Indexes

pemSubunit

Column Syntax OID

pemSubunit

Number of power entry module sub-unit (0 for controller).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.10734.3.3.2.3.5.1.1

pemType

Type of hardware element -- should always be pem or unequip.

Type Values:

0	unequip
1	chassis
2	backplane
3	controller
4	network-interface
5	network-interface-bcomm
6	network-processor
7	feature-card
8	gige-port
9	ten-base-t-port
10	hundred-base-t-port
11	sonet-atm-port
12	sonet-pos-port
13	sonet-pos-srp-port
14	sdh-atm-port
15	sdh-pos-port
16	sdh-pos-srp-port
17	power-supply
18	power-supply-sub-unit
19	fan-controller
20	fan-sub-unit
21	power-entry-module
22	vnam-port
23	ten-gige-port
24	forty-gige-port

.1.3.6.1.4.1.10734.3.3.2.3.5.1.3

pemCfgType

The configuration/redundancy of a hardware element.

Type Values:

0	unconfigured
1	simplex
2	duplex
3	loadshare
4	autonomous

.1.3.6.1.4.1.10734.3.3.2.3.5.1.4

pemRunState

The high-level hardware state (active, initializing, standby, etc.).

Type Values:

0	oos
1	initialize
2	act
3	stby
4	dgn
5	lpbk
6	act-faf
7	stby-faf
8	act-dgrd
9	stby-dgrd

.1.3.6.1.4.1.10734.3.3.2.3.5.1.5

pemQualifier1

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.5.1.6

pemQualifier2

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.5.1.7

pemQualifier3

Further qualification/detail on the high-level hardware state.

Type Values:

0	port-clear
1	degraded
2	port-los
3	port-lof
4	port-oof
5	port-lop
6	port-signal-degrade
7	port-signal-failure
8	port-ais-p
9	port-ais-l
10	port-rdi
11	port-forced
12	port-lockout
13	yellow-alarm
14	red-alarm
15	parity-err
16	crc-err
17	unequipped-slot
18	blade-pull
19	blade-insert
20	blade-slot-mismatch
21	init-failure
22	parent-oos
23	removed
24	no-info
25	over-temp-alarm
26	under-temp-alarm
27	port-ool
28	port-ool-clear
29	inhibit

.1.3.6.1.4.1.10734.3.3.2.3.5.1.8

pemQualifier4

Further qualification/detail on the high-level hardware state.