TPLINK-SNMPRMON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
6
Rows
6
Columns
47
.1.3.6.1.4.1.11863.6.32.1.2.1.1 · 1 row entry · 4 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpSnmpRmonStatsCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-SNMPRMON-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-SNMPRMON-MIB::tpSnmpRmonStatsCtrlTable'
A list of SNMP RMON STATISTICS control entries.
tpSnmpRmonStatsCtrlEntry row .1.3.6.1.4.1.11863.6.32.1.2.1.1.1
RMON (Remote Monitoring), basing on SNMP (Simple Network Management Protocol) architecture, functions to monitor the network. Statistics Group, as one of the commonly used RMON Groups, is used to collect the statistics …
Column Syntax OID
The index of this entry.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11863.6.32.1.2.1.1.1.1
This object identifies the source of the data that
this statistics entry is configured to analyze. This
source can be any ethernet interface on this device.
The source should be given as 1/0/1.
OctetStringr/w .1.3.6.1.4.1.11863.6.32.1.2.1.1.1.2
The owner of this entry.
OctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.11863.6.32.1.2.1.1.1.3
The status column has four defined values:
- 'valid(1)', which indicates that the conceptual row is
available for using by the managed device;

- 'createRequest(2)', which is supplied by a management
s…
EntryStatusr/w
Type Values:
1valid
2createRequest
3underCreation
4invalid
.1.3.6.1.4.1.11863.6.32.1.2.1.1.1.4
.1.3.6.1.4.1.11863.6.32.1.2.2.1 · 1 row entry · 6 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpSnmpRmonHistoryCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-SNMPRMON-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryCtrlTable'
A list of SNMP RMON hisotry control entries.
tpSnmpRmonHistoryCtrlEntry row .1.3.6.1.4.1.11863.6.32.1.2.2.1.1
History Group is one of the commonly used RMON (Remote Monitoring) Groups. After a
history group is configured, the switch collects network statistics information
periodically, based on which the management station ca…
Column Syntax OID
The index of this entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.1
The port from which the history samples were taken. Specify the port in form of 1/0/1.
OctetStringr/w .1.3.6.1.4.1.11863.6.32.1.2.2.1.1.2
The interval to take samplings from the port.
10sec-3600sec.
Integer32r/w
Constraints:
range: 10-3600
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.3
The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.4
The name of the device or user that defined the entry.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.5
Enable/Disable the corresponding sampling entry.
disable(0), disable the history entry.
enable(1), enable the history entry.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11863.6.32.1.2.2.1.1.6
.1.3.6.1.4.1.11863.6.32.1.2.2.2 · 1 row entry · 15 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpSnmpRmonHistoryDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-SNMPRMON-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-SNMPRMON-MIB::tpSnmpRmonHistoryDataTable'
A list of SNMP RMON hisotry data entries.
tpSnmpRmonHistoryDataEntry row .1.3.6.1.4.1.11863.6.32.1.2.2.2.1
Contains of the history data for a control entry
Column Syntax OID
index
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.1
An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same historyControlEntry.
This index starts at 1 and increases by one
as each new sample is taken.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.2
The value of sysUpTime at the start of the interval
over which this sample was measured. If the probe
keeps track of the time of day, it should start
the first sample of the history at a time such that
when the next ho…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.3
The total number of events in which packets
were dropped by the probe due to lack of resources
during this sampling interval. Note that this number
is not necessarily the number of packets dropped, it
is just the numbe…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.4
The total number of octets of data (including
those in bad packets) received on the
network (excluding framing bits but including
FCS octets)
OctetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.5
The number of packets (including bad packets)
received during this sampling interval.
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.6
The number of good packets received during this
sampling interval that were directed to the
broadcast address.
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.7
The number of good packets received during this
sampling interval that were directed to the
broadcast address.
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.8
The number of packets received during this sampling
interval that had a length (excluding framing bits
but including FCS octets) between 64 and 1518
octets, inclusive, but had either a bad Frame Check
Sequence (FCS) wit…
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.9
The number of packets received during this
sampling interval that were less than 64 octets
long (excluding framing bits but including FCS
octets) and were otherwise well formed.
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.10
The number of packets received during this
sampling interval that were longer than 1518
octets (excluding framing bits but including
FCS octets) but were otherwise well formed.
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.11
The total number of packets received during this
sampling interval that were less than 64 octets in
length (excluding framing bits but including FCS
octets) had either a bad Frame Check Sequence (FCS)
with an integral n…
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.12
The number of packets received during this
sampling interval that were longer than 1518 octets
(excluding framing bits but including FCS octets),
and had either a bad Frame Check Sequence (FCS)
with an integral number …
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.13
The number of collion received during this
sampling interval that
CollisionsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.14
The best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent.
Integer32
Constraints:
range: 0-10000
.1.3.6.1.4.1.11863.6.32.1.2.2.2.1.15
.1.3.6.1.4.1.11863.6.32.1.2.3.1 · 1 row entry · 6 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpSnmpRmonEventCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-SNMPRMON-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-SNMPRMON-MIB::tpSnmpRmonEventCtrlTable'
A list of SNMP RMON EVENT control entries.
tpSnmpRmonEventCtrlEntry row .1.3.6.1.4.1.11863.6.32.1.2.3.1.1
RMON (Remote Monitoring), basing on SNMP (Simple Network Management Protocol) architecture,
functions to monitor the network. Event Group, as one of the commonly used RMON Groups, is used
to define RMON events. Alarms…
Column Syntax OID
The index of this entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.1
The name of the User or the community to which the event belongs.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.2
Description which is given to the event for identification.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.3
The event type, which determines the act way of the network device in response to an event.
none(1),no processing.
log(2),logging the event.
snmptrap(3),sending trap messages to the management station.
logandtrap(4),log…
Enumerationr/w
Enumerated Values:
1none
2log
3snmptrap
4logandtrap
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.4
The name of the device or user that defined the entry.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.5
Enable/Disable the corresponding event entry.
disable(0),disable the event entry.
enable(1),enable the event entry.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11863.6.32.1.2.3.1.1.6
.1.3.6.1.4.1.11863.6.32.1.2.3.2 · 1 row entry · 4 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpSnmpRmonEventLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-SNMPRMON-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-SNMPRMON-MIB::tpSnmpRmonEventLogTable'
A list of log that have been logged.
tpSnmpRmonEventLogEntry row .1.3.6.1.4.1.11863.6.32.1.2.3.2.1
A set of data describing an event that has been
logged. For example, an instance of the logDescription
object might be named logDescription.6.47
Column Syntax OID
The event entry that generated this log
entry. The log identified by a particular
value of this index is associated with the same
eventEntry as identified by the same value
of eventIndex.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1.1
An index that uniquely identifies an entry
in the log table amongst those generated by the
same eventEntries. These indexes are
assigned beginning with 1 and increase by one
with each new log entry. The association
be…
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1.2
The value of sysUpTime when this log entry was created.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1.3
An implementation dependent description of the
event that activated this log entry.
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.11863.6.32.1.2.3.2.1.4
.1.3.6.1.4.1.11863.6.32.1.2.4.1 · 1 row entry · 12 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpSnmpRmonAlarmCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-SNMPRMON-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-SNMPRMON-MIB::tpSnmpRmonAlarmCtrlTable'
A list of SNMP RMON EVENT control entries.
tpSnmpRmonAlarmCtrlEntry row .1.3.6.1.4.1.11863.6.32.1.2.4.1.1
Alarm Group is one of the commonly used RMON Groups. RMON alarm
management allows monitoring the specific alarm variables. When
the value of a monitored variable exceeds the threshold, an alarm
event is generated, wh…
Column Syntax OID
The index of this entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.1
The packet type that to be count.
Enumerationr/w
Enumerated Values:
4recBytes
5recPackets
6bPackets
7mPackets
8crcAlignErr
9undersize
10oversize
12jabbers
13collisions
14packet64Bytes
15packetFrom65to127
16packetFrom128to255
17packetFrom256to511
18packetFrom512to1023
19packetFrom1024to1518
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.2
The index of the statistics entry relative with this alarm entry.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.3
The method of sampling the selected variable and calculating the value to be
compared against the thresholds.
absoluteValue(1),compares the values directly with the thresholds at the end of
the sampling interval.
delt…
Enumerationr/w
Enumerated Values:
1absoluteValue
2deltaValue
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.4
The rising counter value that triggers the rise hold alarm.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.5
The index of the corresponding event which will be triggered if the sampled
value is larger than the Rise Hold.
Integer32r/w
Constraints:
range: 1-12
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.6
The falling counter value that triggers the fall hold alarm.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.7
The index of the corresponding event which will be triggered if the sampled
value is lower than the Fall Hold.
Integer32r/w
Constraints:
range: 1-12
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.8
Specify the type of the alarm.
risingAlarm(1),When the sampled value exceeds the Rise Hold, an alarm event is triggered.
fallingAlarm(2),When the sampled value is under the Fall Hold, an alarm event is triggered.
risin…
Enumerationr/w
Enumerated Values:
1risingAlarm
2fallingAlarm
3risingOrFallingAlarm
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.9
The alarm interval time in seconds.
10sec-3600sec.
Integer32r/w
Constraints:
range: 10-3600
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.10
The name of the device or user that defined the entry.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.11
Enable/Disable the corresponding alarm entry.
disable(0),disable the alarm entry.
enable(1),enable the alarm entry
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11863.6.32.1.2.4.1.1.12