TPLINK-RIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
17
.1.3.6.1.4.1.11863.6.40.1.2.1 · 1 row entry · 2 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpRipNetworkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-RIP-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-RIP-MIB::tpRipNetworkTable'
The list of rip network.
tpRipNetworkEntry row .1.3.6.1.4.1.11863.6.40.1.2.1.1
RIP network entries.
Column Syntax OID
RIP network IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11863.6.40.1.2.1.1.1
The following values are states:
these values may be used as follow:
active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
createAndWait(5)…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
.1.3.6.1.4.1.11863.6.40.1.2.1.1.2
.1.3.6.1.4.1.11863.6.40.1.3.1 · 1 row entry · 10 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpRipInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-RIP-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-RIP-MIB::tpRipInterfaceTable'
The list of rip interfaces.
tpRipInterfaceEntry row .1.3.6.1.4.1.11863.6.40.1.3.1.1
Config the RIP parameters of the interface.
Column Syntax OID
The interface IP address and subnet mask.
OctetString
Constraints:
range: 0-25
.1.3.6.1.4.1.11863.6.40.1.3.1.1.1
The interface RIP status(up or down).
OctetString
Constraints:
range: 0-10
.1.3.6.1.4.1.11863.6.40.1.3.1.1.2
Select the version of RIP control packets sended from the interface.
Enumerationr/w
Enumerated Values:
1ripv1
2ripv2
3rip-1c
.1.3.6.1.4.1.11863.6.40.1.3.1.1.3
Select the version of RIP control packets received from the interface.
Enumerationr/w
Enumerated Values:
1ripv1
2ripv2
3both
.1.3.6.1.4.1.11863.6.40.1.3.1.1.4
Send RIP version 2 formatted packets via broadcast.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11863.6.40.1.3.1.1.5
Select an authentication type.
Enumerationr/w
Enumerated Values:
1none
2simple
3md5
.1.3.6.1.4.1.11863.6.40.1.3.1.1.6
Enter the RIP Authentication Key ID for the specified interface.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11863.6.40.1.3.1.1.7
Enter the RIP Authentication Key for the specified interface.
OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.11863.6.40.1.3.1.1.8
Enable or disable the split horizon.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11863.6.40.1.3.1.1.9
Enable or disable the poison reverse.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11863.6.40.1.3.1.1.10
.1.3.6.1.4.1.11863.6.40.1.4.1 · 1 row entry · 5 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpRipRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-RIP-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-RIP-MIB::tpRipRouteTable'
Display the route entries generated by RIP protocol.
tpRipRouteEntry row .1.3.6.1.4.1.11863.6.40.1.4.1.1
RIP route entries.
Column Syntax OID
The destination IP address and subnet mask.
OctetString
Constraints:
range: 0-25
.1.3.6.1.4.1.11863.6.40.1.4.1.1.1
The gateway interface to send the data packet.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11863.6.40.1.4.1.1.2
The metric to reach the destination IP address.
Integer32
Constraints:
range: 1-15
.1.3.6.1.4.1.11863.6.40.1.4.1.1.3
The gateway interface name.
OctetString
Constraints:
range: 0-25
.1.3.6.1.4.1.11863.6.40.1.4.1.1.4
The time of the route entry.
Integer32
Constraints:
range: 1-300
.1.3.6.1.4.1.11863.6.40.1.4.1.1.5