TPLINK-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
24

tpQosBasicConfigTable

table
.1.3.6.1.4.1.11863.6.22.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpQosBasicConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-QOS-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-QOS-MIB::tpQosBasicConfigTable' 
A list of qos basic config entries. Here you can configure the port priority.
tpQosBasicConfigEntry row .1.3.6.1.4.1.11863.6.22.1.1.1.1
An entry contains of the information of qos basic config.
Indexes
Column Syntax OID
tpQosBasicConfigPort
The physical port number of the switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.22.1.1.1.1.1
tpQosBasicConfigPri
0. Cos0
1. Cos1
2. Cos2
3. Cos3
4. Cos4
5. Cos5
6. Cos6
7. Cos7
Specify the priority for the port.
Enumerationr/w
Enumerated Values:
0cos0
1cos1
2cos2
3cos3
4cos4
5cos5
6cos6
7cos7
 .1.3.6.1.4.1.11863.6.22.1.1.1.1.2
tpQosBasicConfigTrust
Trust mode for specified port.
Untrust--Port priority activated.
Trust-8021p--802.1p priority activated.
Trust-DSCP--IP DSCP priority activated.
Enumerationr/w
Enumerated Values:
0untrust
1trust-8021p
2trust-DSCP
 .1.3.6.1.4.1.11863.6.22.1.1.1.1.3
tpQosBasicConfigLag
The LAG number which the port belongs to.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.11863.6.22.1.1.1.1.4

tpQosSchedulerTable

table
.1.3.6.1.4.1.11863.6.22.1.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpQosSchedulerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-QOS-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-QOS-MIB::tpQosSchedulerTable' 
A list of qos scheduler config entries. Here you can configure the qos scheduler.
tpQosSchedulerEntry row .1.3.6.1.4.1.11863.6.22.1.2.2.1
An entry contains of the information of qos scheduler.
Indexes
Column Syntax OID
tpQosSchedulerConfigTc
Traffic class queue ID.
Enumeration
Enumerated Values:
0tc0
1tc1
2tc2
3tc3
4tc4
5tc5
6tc6
7tc7
 .1.3.6.1.4.1.11863.6.22.1.2.2.1.1
tpQosSchedulerConfigMode
Queue schedule mode: Strict-Priority or Weighted-Round-Robin.
Enumerationr/w
Enumerated Values:
0strict
1weighted
 .1.3.6.1.4.1.11863.6.22.1.2.2.1.2
tpQosSchedulerConfigWeight
Weight of the queue: 0 stands for Strict schedule mode; 1-127 stands for WRR schedule mode.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.2.2.1.3
tpQosSchedulerConfigMinBandwidth
Min-Bandwidth of the specified queue, value 0%-100%.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.2.2.1.4
tpQosSchedulerConfigManagementType
Queue drop mode: taildrop.
Enumerationr/w
Enumerated Values:
0taildrop
 .1.3.6.1.4.1.11863.6.22.1.2.2.1.5

tpQos8021pTable

table
.1.3.6.1.4.1.11863.6.22.1.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpQos8021pTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-QOS-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-QOS-MIB::tpQos8021pTable' 
A list of qos 8021p entries.
Here you can configure 802.1P Priority.
tpQos8021pEntry row .1.3.6.1.4.1.11863.6.22.1.3.1.1
An entry contains of the information of qos 8021p.
Indexes
Column Syntax OID
tpQos8021pPriTag
Indicates the precedence level defined by IEEE802.1P.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.3.1.1.1
tpQos8021pPriLevel
Indicates the priority level the packets with tag are mapped to.
The priority levels are labeled as TC.
Enumerationr/w
Enumerated Values:
0tc0
1tc1
2tc2
3tc3
4tc4
5tc5
6tc6
7tc7
 .1.3.6.1.4.1.11863.6.22.1.3.1.1.2

tpQos8021pRemapTable

table
.1.3.6.1.4.1.11863.6.22.1.4.1 · 1 row entry · 10 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpQos8021pRemapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-QOS-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-QOS-MIB::tpQos8021pRemapTable' 
A list of qos 8021p remapping entries.
Here you can configure 802.1P Priority Remapping.
tpQos8021pRemapEntry row .1.3.6.1.4.1.11863.6.22.1.4.1.1
An entry contains of the information of qos 8021p remapping.
Indexes
Column Syntax OID
tpQos8021pPort
The physical port number of the switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.1
tpQos8021pPriTag0
Indicates the remapping value of the specified 802.1P priority.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.2
tpQos8021pPriTag1
Indicates the remapping value of the specified 802.1P priority.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.3
tpQos8021pPriTag2
Indicates the remapping value of the specified 802.1P priority.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.4
tpQos8021pPriTag3
Indicates the remapping value of the specified 802.1P priority.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.5
tpQos8021pPriTag4
Indicates the remapping value of the specified 802.1P priority.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.6
tpQos8021pPriTag5
Indicates the remapping value of the specified 802.1P priority.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.7
tpQos8021pPriTag6
Indicates the remapping value of the specified 802.1P priority.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.8
tpQos8021pPriTag7
Indicates the remapping value of the specified 802.1P priority.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.9
tpQos8021pPriLag
The LAG number which the port belongs to.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.11863.6.22.1.4.1.1.10

tpQosDSCPTable

table
.1.3.6.1.4.1.11863.6.22.1.5.2 · 1 row entry · 3 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpQosDSCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-QOS-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-QOS-MIB::tpQosDSCPTable' 
A list of qos DSCP entries.
Here you can configure DSCP Priority.
tpQosDSCPEntry row .1.3.6.1.4.1.11863.6.22.1.5.2.1
An entry contains of the information of qos DSCP.
Indexes
Column Syntax OID
tpQosDSCPPriTag
Indicates the priority determined by the DS region of IP datagram.
It ranges from 0 to 63.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.5.2.1.1
tpQosDSCPPriLevel
Indicates the priority level the packets with tag are mapped to.
The priority levels are labeled as cos0 - cos7.
Enumerationr/w
Enumerated Values:
0cos0
1cos1
2cos2
3cos3
4cos4
5cos5
6cos6
7cos7
 .1.3.6.1.4.1.11863.6.22.1.5.2.1.2
tpQosDSCPPriRemap
Indicates the re-map DSCP value of the specified DSCP, it ranges from 0 to 63.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.22.1.5.2.1.3