TPLINK-POWER-OVER-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
17
.1.3.6.1.4.1.11863.6.56.1.1.2.1 · 1 row entry · 11 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpPoePortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-POWER-OVER-ETHERNET-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-POWER-OVER-ETHERNET-MIB::tpPoePortConfigTable'
A list of PoE entries.
Here you can configure the PoE feature on each port.
tpPoePortConfigEntry row .1.3.6.1.4.1.11863.6.56.1.1.2.1.1
An entry contains of the configuration and information of poe port.
Indexes
Column Syntax OID
tpPoePortIndexThe port number of the Switch.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.1
tpPoePortStatusSelect to disable/enable the PoE feature
for the corresponding port. If set enable,
the corresponding port can supply power to
the linked PD (Powered Device).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.2
tpPoePriorityCooperates with the Power Disconnected Method
to decide the way to supply power to the new
linked PD (Powered Device) when the surplus
power is inadequate.
Enumerationr/w
Enumerated Values:
0high
1middle
2low
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.3
tpPoePowerLimitDefines the max power the corresponding port can supply.The unit is 0.1WInteger32r/w
Constraints:
range: 1-300
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.4
tpPoePortTimeRangeNameSelect time range by entering its name.OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.5
tpPoePortProfileNameSelect profile by entering its name.OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.6
tpPoePowerDisplays the port's real time power supply in 0.1W.Integer32
Constraints:
range: 1-300
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.7
tpPoeCurrentDisplays the port's real time current in 1mA.Integer32
Constraints:
range: 1-1000
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.8
tpPoeVoltageDisplays the port's real time voltage in 0.1V.Integer32
Constraints:
range: 1-300
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.9
tpPoeClassDisplays the class the linked PD (Powered Device) belongs to.Enumeration
Enumerated Values:
0class0
1class1
2class2
3class3
4class4
7class-not-defined
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.10
tpPoePowerStatusDisplays the port's real time power status.Enumeration
Enumerated Values:
0off
1turning-on
2on
3overload
4short
5nonstandard-pd
6voltage-high
7voltage-low
8hardware-fault
9overtemperature
.1.3.6.1.4.1.11863.6.56.1.1.2.1.1.11
.1.3.6.1.4.1.11863.6.56.1.2.1 · 1 row entry · 6 columns
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpPoeProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-POWER-OVER-ETHERNET-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-POWER-OVER-ETHERNET-MIB::tpPoeProfileTable'
A list of PoE profile entries.
Here you can define the PoE profile.
tpPoeProfileEntry row .1.3.6.1.4.1.11863.6.56.1.2.1.1
An entry contains of the information of PoE profile.
Column Syntax OID
tpPoeProfileIndexThe index number of the Switch.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11863.6.56.1.2.1.1.1
tpPoeProfileNamethe name of PoE profile.OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.11863.6.56.1.2.1.1.2
tpPoeProfilePortStatusSelect to disable/enable the PoE feature
for the corresponding profile. If set enable,
the port selected the profile can supply power to
the linked PD (Powered Device).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11863.6.56.1.2.1.1.3
tpPoeProfilePriorityCooperates with the Power Disconnected Method
to decide the way to supply power to the new
linked PD (Powered Device) when the surplus
power is inadequate.
Enumerationr/w
Enumerated Values:
0high
1middle
2low
.1.3.6.1.4.1.11863.6.56.1.2.1.1.4
tpPoeProfilePowerLimitDefines the max power the corresponding port can supply.The unit is 0.1W.Integer32r/w
Constraints:
range: 1-300
.1.3.6.1.4.1.11863.6.56.1.2.1.1.5
tpPoeProfileStatusTPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
.1.3.6.1.4.1.11863.6.56.1.2.1.1.6