TPLINK-DHCPFILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
10

dhcpFilterPortConfigTable

table
.1.3.6.1.4.1.11863.6.48.1.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk dhcpFilterPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-DHCPFILTER-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-DHCPFILTER-MIB::dhcpFilterPortConfigTable' 
A list of DHCP Filter port config entries.
Here you can configure the port parameters for the DHCP Filter.
dhcpFilterPortConfigEntry row .1.3.6.1.4.1.11863.6.48.1.2.1.1
An entry contains of the information of DHCP Filter port config.
Indexes
No indexes recorded
Column Syntax OID
dhcpFilterPort
Display port number
OctetString .1.3.6.1.4.1.11863.6.48.1.2.1.1.1
dhcpFilterPortConfigState
0. disable
1. enable
Select Enable/Disable DHCP Filter function of the specified port.
Enumerationr/w .1.3.6.1.4.1.11863.6.48.1.2.1.1.2
dhcpFilterPortConfigMacVerify
0. disable
1. enable
Select Enable/Disable the MAC Verify feature.
There are two fields of the DHCP packet containing the MAC address of the Host.
The MAC Verify feature is to compare the two fields and discard the pa…
Enumerationr/w .1.3.6.1.4.1.11863.6.48.1.2.1.1.3
dhcpFilterPortConfigRateLimit
0. disable
1. 5pps
2. 10pps
3. 15pps
4. 20pps
5. 25pps
6. 30pps
Select Enable/Disable the Flow Control feature for the DHCP packets.
The excessive DHCP packets will be discarded.
Enumerationr/w .1.3.6.1.4.1.11863.6.48.1.2.1.1.4
dhcpFilterPortConfigDeclineRateLimit
0. disable
1. 5pps
2. 10pps
3. 15pps
4. 20pps
5. 25pps
6. 30pps
Select Enable/Disable the Flow Control feature for the DHCP decline packets.
The excessive DHCP decline packets will be discarded.
Enumerationr/w .1.3.6.1.4.1.11863.6.48.1.2.1.1.5
dhcpFilterPortConfigPortLag
The LAG to which the port belongs to.
OctetString .1.3.6.1.4.1.11863.6.48.1.2.1.1.6

dhcpFilterServerPermitEntryTable

table
.1.3.6.1.4.1.11863.6.48.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk dhcpFilterServerPermitEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-DHCPFILTER-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-DHCPFILTER-MIB::dhcpFilterServerPermitEntryTable' 
A list of DHCP Filter DHCP Server permit entries.
Here you can add or delete entries.
dhcpFilterServerPermitEntry row .1.3.6.1.4.1.11863.6.48.1.3.1.1
An entry contains server ip address, client mac address and interface .
Indexes
No indexes recorded
Column Syntax OID
serverIp
IP address of the permit entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.48.1.3.1.1.1
clientMac
MAC address of the permit entry.
OctetStringr/w .1.3.6.1.4.1.11863.6.48.1.3.1.1.2
interface
Interface of the permit entry.
OctetStringr/w .1.3.6.1.4.1.11863.6.48.1.3.1.1.3
rowStatus
the following value are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the foll…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.48.1.3.1.1.4