TPLINK-DHCP6FILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
8

dhcp6FilterPortConfigTable

table
.1.3.6.1.4.1.11863.6.67.1.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk dhcp6FilterPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-DHCP6FILTER-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-DHCP6FILTER-MIB::dhcp6FilterPortConfigTable' 
A list of DHCPv6 Filter port config entries.
Here you can configure the port parameters for the DHCPv6 Filter.
dhcp6FilterPortConfigEntry row .1.3.6.1.4.1.11863.6.67.1.2.1.1
An entry contains of the information of DHCPv6 Filter port config.
Indexes
Column Syntax OID
dhcp6FilterPort
Display port number
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.67.1.2.1.1.1
dhcp6FilterPortConfigState
0. disable
1. enable
Select Enable/Disable DHCPv6 Filter function of the specified port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.67.1.2.1.1.2
dhcp6FilterPortConfigRateLimit
0. disable
1. 5pps
2. 10pps
3. 15pps
4. 20pps
5. 25pps
6. 30pps
Select Enable/Disable the Flow Control feature for the DHCPv6 packets.
The excessive DHCPv6 packets will be discarded.
Enumerationr/w
Enumerated Values:
0disable
5value5pps
10value10pps
15value15pps
20value20pps
25value25pps
30value30pps
 .1.3.6.1.4.1.11863.6.67.1.2.1.1.3
dhcp6FilterPortConfigDeclineRateLimit
0. disable
1. 5pps
2. 10pps
3. 15pps
4. 20pps
5. 25pps
6. 30pps
Select Enable/Disable the Flow Control feature for the DHCPv6 decline packets.
The excessive DHCPv6 decline packets will be discarded.
Enumerationr/w
Enumerated Values:
0disable
5value5pps
10value10pps
15value15pps
20value20pps
25value25pps
30value30pps
 .1.3.6.1.4.1.11863.6.67.1.2.1.1.4
dhcp6FilterPortConfigPortLag
The LAG to which the port belongs to.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.11863.6.67.1.2.1.1.5

dhcp6FilterServerPermitEntryTable

table
.1.3.6.1.4.1.11863.6.67.1.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk dhcp6FilterServerPermitEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-DHCP6FILTER-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-DHCP6FILTER-MIB::dhcp6FilterServerPermitEntryTable' 
A list of DHCPv6 Filter DHCPv6 Server permit entries.
Here you can add or delete entries.
dhcp6FilterServerPermitEntry row .1.3.6.1.4.1.11863.6.67.1.3.1.1
An entry contains server ip address and interface .
Indexes
Column Syntax OID
dhcp6FilterServerIp
IP address of the permit entry.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11863.6.67.1.3.1.1.1
dhcp6FilterInterface
Interface of the permit entry.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.11863.6.67.1.3.1.1.2
dhcp6FilterRowStatus
the following value are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the foll…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.67.1.3.1.1.3