TPLINK-BANDWIDTH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

tpRateLimitTable

table

.1.3.6.1.4.1.11863.6.23.1.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the tplink variant from /opt/observium/mibs/tplink.

Command help

Walk tpRateLimitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-BANDWIDTH-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-BANDWIDTH-MIB::tpRateLimitTable'

A list of rate limit entries.
Here you can configure the traffic rate on each port.

tpRateLimitEntry row .1.3.6.1.4.1.11863.6.23.1.1.1.1

An entry contains of the information of rate limit.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
tpRateLimitPort The port number of the Switch.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.11863.6.23.1.1.1.1.1`
tpRateLimitIngressRate Set the bandwidth for receiving packets on the port.	Integer32r/w Constraints: `range: 0-1000000`	`.1.3.6.1.4.1.11863.6.23.1.1.1.1.2`
tpRateLimitEgressRate Set the bandwidth for sending packets on the port.	Integer32r/w Constraints: `range: 0-1000000`	`.1.3.6.1.4.1.11863.6.23.1.1.1.1.3`
tpRateLimitPortLag The LAG number which the port belongs to.	OctetString Constraints: `range: 1-255`	`.1.3.6.1.4.1.11863.6.23.1.1.1.1.4`

tpStormControlTable

table

.1.3.6.1.4.1.11863.6.23.1.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the tplink variant from /opt/observium/mibs/tplink.

Command help

Walk tpStormControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-BANDWIDTH-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-BANDWIDTH-MIB::tpStormControlTable'

A list of storm control entries.
Here you can configure the storm-control for forwarding packets.

tpStormControlEntry row .1.3.6.1.4.1.11863.6.23.1.2.1.1

An entry contains of the information of storm control.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

tpStormControlPort

The port number of the Switch.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.11863.6.23.1.2.1.1.1

tpStormControlMode

The storm control rate mode: kbps,ratio or pps.

Enumerationr/w

Enumerated Values:

0	kbps
1	ratio
2	pps

.1.3.6.1.4.1.11863.6.23.1.2.1.1.2

tpStormControlBroadCastRate

Set the bandwidth for receiving broadcast packets on the port.
The packet traffic exceeding the bandwidth will be discarded.
kbps(0-1000000) ratio(0-100) pps(0-1488000)
Set it 0 to disable the storm control functi…

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11863.6.23.1.2.1.1.3

tpStormControlMultiCastRate

Set the bandwidth for receiving multicast packets on the port.
The packet traffic exceeding the bandwidth will be discarded.
kbps(0-1000000) ratio(0-100) pps(0-1488000)
Set it 0 to disable the storm control functi…

Integer32r/w

Constraints:
range: 0-1488000

.1.3.6.1.4.1.11863.6.23.1.2.1.1.4

tpStormControlULRate

Set the bandwidth for receiving UL-Frame on the port.
The packet traffic exceeding the bandwidth will be discarded.
kbps(0-1000000) ratio(0-100) pps(0-1488000)
Set it 0 to disable the storm control function for th…

Integer32r/w

Constraints:
range: 0-1488000

.1.3.6.1.4.1.11863.6.23.1.2.1.1.5

tpStormControlAction

Set the exceed operation of the specified port: drop packets or shutdown.

Enumerationr/w

Enumerated Values: