TPLINK-8021X-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
17

tp8021xPortConfigTable

table
.1.3.6.1.4.1.11863.6.31.1.2.1 · 1 row entry · 11 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tp8021xPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-8021X-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-8021X-MIB::tp8021xPortConfigTable' 
A list of 8021x port config entries.
tp8021xPortConfigEntry row .1.3.6.1.4.1.11863.6.31.1.2.1.1
An entry contains of the information of 8021x port config.
Here you can configure the ports for the 802.1X authentication.
Indexes
Column Syntax OID
tp8021xPortConfigPortIndex
This object indicates the port number.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.1
tp8021xPortConfigEnable
0. disable
1. enable
Select Enable/Disable the 802.1X authentication feature for the port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.2
tp8021xPortConfigMABEnable
0. disable
1. enable
Select Enable/Disable the MAB feature for the port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.3
tp8021xPortConfigControlMode
Specify the Control Mode for the port.
0. force auth: In this mode, the port can work normally without passing the 802.1X Authentication.
1. force unauth: In this mode, the port is forbidden working for its fixed unaut…
Enumerationr/w
Enumerated Values:
0forceAuth
1forceUnAuth
2autoAuth
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.6
tp8021xPortConfigControlType
Specify the Control Type for the port.
0. base of mac: Any client connected to the port should pass the 802.1X Authentication for access.
1. base of port: All the clients connected to the port can access the network o…
Enumerationr/w
Enumerated Values:
0macBased
1portBased
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.7
tp8021xPortConfigGuestVlanID
Enter your desired VLAN ID to enable the Guest VLAN feature.
The supplicants in the Guest VLAN can access the specified network source.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.8
tp8021xPortConfigMaxRequest
Specify the maximum transfer times of the repeated authentication request.(1-9)
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.9
tp8021xPortConfigQuietPeriod
Specify a value for Quiet Period. Once the supplicant failed to the 802.1X Authentication,
then the switch will not respond to the authentication request from the same supplicant
during the Quiet Period. (0-999 second)
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.10
tp8021xPortConfigSuppTimeout
Specify the maximum time for the switch to wait for the response from supplicant
before resending a request to the supplicant. (1-9 second)
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.11
tp8021xPortConfigAuthState
The authentication status of the port.
0. unAuthorized
1. Authorized
Enumeration
Enumerated Values:
0unAuthorized
1authorized
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.12
tp8021xPortConfigPortLag
the lag the port belong to
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.31.1.2.1.1.13

tp8021xAuthenticatorStateTable

table
.1.3.6.1.4.1.11863.6.31.1.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tp8021xAuthenticatorStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-8021X-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-8021X-MIB::tp8021xAuthenticatorStateTable' 
Display authenticator state of dot1x.
tp8021xAuthenticatorStateEntry row .1.3.6.1.4.1.11863.6.31.1.3.1.1
An entry contains of the authenticator state for a single port.
Indexes
Column Syntax OID
tp8021xAuthenticatorStatePort
This object indicates the port number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.31.1.3.1.1.1
tp8021xAuthenticatorStateMac
This object indicates the MAC address of authenticated client.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.31.1.3.1.1.2
tp8021xAuthenticatorStatePAEState
The PAE state of client.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.31.1.3.1.1.3
tp8021xAuthenticatorStateBEState
The backend state of client.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.31.1.3.1.1.4
tp8021xAuthenticatorStateStatus
The authenticate status of client.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.31.1.3.1.1.5
tp8021xAuthenticatorStateVid
The VLAN id of authenticated client.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.31.1.3.1.1.6