TN-LAG-MIB Table View

Configuration information about each Link Aggregation Group.

tnLagConfigEntry row .1.3.6.1.4.1.7483.6.1.2.15.2.1

An entry (conceptual row) in the tnLagConfigTable.
Each entry represents a Link Aggregation Group.
Create or destroy rows to add or remove Link Aggregation Groups (LAG).

After tnLagRowStatus is set to activ…

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId tnLagIndex

Column	Syntax	OID
tnLagIndex the number of the Link Aggregation Group.	LAGInterfaceNumber Type Constraints: range: 1..240	.1.3.6.1.4.1.7483.6.1.2.15.2.1.1
tnLagRowStatus RowStatus for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.6.1.2.15.2.1.2
tnLagPortThreshold tnLagPortThreshold is a threshold for tnLagPortThresholdAction. When a physical port link state changes and the number of operational physical ports is less than or equal to tnLagPortThreshold, tnLagPortT…	Integer32r/w Constraints: range: 0-23	.1.3.6.1.4.1.7483.6.1.2.15.2.1.3
tnLagPortThresholdAction Port Threshold Action is action to take when the number of operational (link up) physical ports is less than tnLagPortThreshold. When a physical port ifOperStatus changes and the number of operational phy…	Enumerationr/w Enumerated Values: 1 down 2 dynamicCost	.1.3.6.1.4.1.7483.6.1.2.15.2.1.4
tnLagEnableMarkerGenerator enables (true(1)) or disables (false(2)) the Marker Generator protocol.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.2.1.5
tnLagEnableLACP enables (true(1)) or disables (false(2)) the Link Aggregation Control Protocol (LACP).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.2.1.6
tnLagDescription discription text for the Link Aggregation Group port.	TN-TC-MIBTItemLongDescriptionr/w Type Constraints: range: 0..160	.1.3.6.1.4.1.7483.6.1.2.15.2.1.7
tnLagDynamicCosting When dynamic cost and OSPF autocost are both configured then costing is applied based on the total number of links configured and the cost is advertised inversely proportional to the number of links available at the tim…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.2.1.8
tnLagLACPMode tnLagLACPMode represents the mode in which LACP will operate. If the value is set to 'passive', LACP places all member ports of a lag into a passive negotiating state. When this is the case member ports of the lag respo…	Enumerationr/w Enumerated Values: 1 passive 2 active	.1.3.6.1.4.1.7483.6.1.2.15.2.1.9
tnLagLACPAdminKeyAutogen tnLagLACPAdminKeyAutogen is set to 'true' if the lag administrative key in the dot3adAggActorAdminKey object was auto generated. tnLagLACPAdminKeyAutogen is set to 'false', if the lag administrative key was manually con…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.2.1.10
tnLagLACPTransmitInterval tnLagLACPTransmitInterval configures the timer interval for periodic transmission of LACP packets. If set to 'slow', LACP packets are transmitted every 30 seconds. If set to 'fast', LACP packets are transmitted every se…	Enumerationr/w Enumerated Values: 1 slow 2 fast	.1.3.6.1.4.1.7483.6.1.2.15.2.1.11
tnLagAccessAdaptQos The value of tnLagAccessAdaptQos specifies how the LAG SAP queue and virtual scheduler buffering and rate parameters are adapted over multiple active MDAs. link (1) - The LAG will create the SAP queues and vir…	Enumerationr/w Enumerated Values: 1 link 2 distribute	.1.3.6.1.4.1.7483.6.1.2.15.2.1.12
tnLagLACPXmitStdby The value of tnLagLACPXmitStdby specifies whether or not LACP messages are transmitted on standby-links.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.2.1.13
tnLagLACPSelCrit The value of tnLagLACPSelCrit specifies which selection criteria should be used to select the active sub-group.	Enumerationr/w Enumerated Values: 1 highest-count 2 highest-weight	.1.3.6.1.4.1.7483.6.1.2.15.2.1.14
tnLagLACPSelCritSlaveToPartner The value of tnLagLACPSelCritSlaveToPartner specifies together with tnLagLACPSelCrit selection criteria should be used to select the active sub-group. The term 'eligible member' refers to a lag-member link which can p…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.2.1.15
tnLagLACPNbrOfSubGroups The value of tnLagLACPNbrOfSubGroups indicates the number of subgroups configured in this LAG.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.15.2.1.16
tnLagholdTimeDown The value of tnLagholdTimeDown specifies the timer in 0.1 second units which controls the delay between detecting that a LAG is down (all active ports are down) and reporting it to the higher levels. The default value …	100s of millisecondsUnsigned32r/w Constraints: range: 0-2000	.1.3.6.1.4.1.7483.6.1.2.15.2.1.17
tnLagPortType The value of tnLagPortType specifies the type of ports allowed in this LAG. A value of 'standard (1)' allows all non-HSMDA type ports to be added to this LAG. A value of 'hsmda (2)' limits the LAG member…	Enumerationr/w Enumerated Values: 1 standard 2 hsmda	.1.3.6.1.4.1.7483.6.1.2.15.2.1.18
tnLagPerFpIngQueuing The value of tnLagPerFpIngQueuing specifies whether a more efficient method of queue allocation for LAG SAPs should be utilized. An 'inconsistentValue' error is returned if this object is set to a differe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.2.1.19
tnLagAlmProfName .	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.7483.6.1.2.15.2.1.20

Operational information about each Link Aggregation Group.

tnLagOperationEntry row .1.3.6.1.4.1.7483.6.1.2.15.3.1

An entry (conceptual row) in the tnLagOperationTable.
Each entry represents an active Link Aggregation Group.

Indexes

No indexes recorded

Column	Syntax	OID
tnLagIfIndex ifIndex for the Link Aggregation Group. This value is zero when tnLagRowStatus is not active(1).	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.7483.6.1.2.15.3.1.1
tnLagConfigLastChange last change timestamp records when any object in tnLagConfigTable was set.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.15.3.1.2
tnLagPortThresholdFalling counts the number of linkDown or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being less than or equal to tnLagPortThreshold value.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.15.3.1.3
tnLagPortThresholdRising counts the number of linkUp or dynamicCost events for the Link Aggregation Group caused by the number of physical ports being greater than tnLagPortThreshold value.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.15.3.1.4

The tnLagMemberTable has an entry for each Port that is part
of a LAG.

tnLagMemberEntry row .1.3.6.1.4.1.7483.6.1.2.15.5.1

Each row entry represents a particular port in a LAG. Entries are
automatically created when a Port is provisioned as part of a LAG,
i.e. when tnPortLagId from TIMETRA-PORT-MIB.mib is changed from
its default value of '…

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId tnLagIndex TN-PORT-MIBtnPortPortID

Column	Syntax	OID
tnLagMemberPortName The value of tnLagMemberPortName indicates the name of the port that is a member of the LAG used to index into tnLagMemberTable. This is a read-only object that is the same as tnPortName from TIMETRA-PORT-MIB.mib.	TN-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.7483.6.1.2.15.5.1.1
tnLagMemberPortIsPrimary The value of tnLagMemberPortIsPrimary indicates whether the port used to index into tnLagMemberTable is the primary port of the LAG used to index into tnLagMemberTable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.5.1.2

The tnLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable
with 7x50 specific features.

tnLagPortEntry row .1.3.6.1.4.1.7483.6.1.2.15.6.1

A list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device.
The tnLagPortTable extends the IEEE8023-LAG-MIB::dot3adAggPortTable
with 7x50 specific features.

Indexes

No indexes recorded

Column	Syntax	OID
tnLagPortSubgroup The value of tnLagPortSubgroup specifies the subgroup to which the port in this LAG is assigned.	LAGSubgroupr/w Type Constraints: range: -2..-1 range: 1..8	.1.3.6.1.4.1.7483.6.1.2.15.6.1.1
tnLagPortActiveStdby The value of tnLagPortActiveStdby indicates active standby state of this port in the LAG.	Enumeration Enumerated Values: 1 active 2 stand-by	.1.3.6.1.4.1.7483.6.1.2.15.6.1.2

Extension information about each Link Aggregation Group.

tnLagConfigXEntry row .1.3.6.1.4.1.7483.6.1.2.15.7.1

An entry (conceptual row) in the tnLagConfigXTable.
Each entry represents an active Link Aggregation Group.

Indexes

No indexes recorded

Column	Syntax	OID
tnLagConfigXIngressAvailBandwidth Indicate the remaining Ingress Bandwidth of the LAG.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.15.7.1.1
tnLagConfigXEgressAvailBandwidth Indicate the remaining Egress Bandwidth of the LAG.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.15.7.1.2
tnLagConfigXMaxPortSize Indicate the number of aggregated port.Allow to set the size of the LAG.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.6.1.2.15.7.1.3
tnLagConfigXNumSelectedPorts indicate the number of selected ports for the LAG.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.15.7.1.4
tnLagConfigXNumAttachedPorts indicate the number of attached ports for the LAG.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.15.7.1.5
tnLagConfigXPrimaryPort Specify the primary port for the LAG group.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.7483.6.1.2.15.7.1.6
tnLagAdminState .	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.7483.6.1.2.15.7.1.7
tnLagLPTConsequenceAction Indicates the Lag LPT ConsequenceAction.	Enumerationr/w Enumerated Values: 1 noAction 2 oneShutDown 3 allShutDown	.1.3.6.1.4.1.7483.6.1.2.15.7.1.8
tnLagLosProp The LOS propagation.	Enumerationr/w Enumerated Values: 1 laserOn 2 laserOff	.1.3.6.1.4.1.7483.6.1.2.15.7.1.9
tnLagTPID The TPID for the LagGroup.	Enumerationr/w Enumerated Values: 1 qinqtpid1 2 qinqtpid2 3 qinqtpid3 4 qinqtpid4	.1.3.6.1.4.1.7483.6.1.2.15.7.1.10
tnLagMtu The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that ca…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.6.1.2.15.7.1.11
tnLagSpeed .	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.6.1.2.15.7.1.12

The tnLagCommandTable consists of one-shot action commands that force
or clear active standby state on LAG subgroups.

tnLagCommandEntry row .1.3.6.1.4.1.7483.6.1.2.15.20.1

The tnLagCommandEntry contains the commands available to execute on an
existing LAG.
Rows in this table are created and destroyed by the system

Indexes

TROPIC-SYSTEM-MIBtnSysSwitchId tnLagIndex tnLagSubgroup

Column	Syntax	OID
tnLagSubgroup The value of tnLagSubgroup specifies the subgroup on which the command is executed.	LAGSubgroup Type Constraints: range: -2..-1 range: 1..8	.1.3.6.1.4.1.7483.6.1.2.15.20.1.1
tnLagCommand The value of tnLagCommand specifies the command.	Enumerationr/w Enumerated Values: 0 noCmd 1 clearForce 2 force	.1.3.6.1.4.1.7483.6.1.2.15.20.1.2
tnLagCommandActiveStdby The value of tnLagCommandActiveStdby indicates active standby state the subgroup is forced to be. This parameter is not required for clearForce command.	Enumerationr/w Enumerated Values: 1 active 2 standby	.1.3.6.1.4.1.7483.6.1.2.15.20.1.3
tnLagCommandAllMc If tnLagCommandAllMc is 'true', all MC-LAGs are forced to switch or clear.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.15.20.1.4
tnLagCommandMcPeerIpType The value of tnLagCommandMcPeerIpType specifies the address type of tnLagCommandMcPeerIpAddr.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.7483.6.1.2.15.20.1.5
tnLagCommandMcPeerIpAddr The value of tnLagCommandMcPeerIpAddr specifies the address of the MC-LAG peer that is forced to switch or clear.	OctetStringr/w Constraints: range: 0-0 range: 4-4	.1.3.6.1.4.1.7483.6.1.2.15.20.1.6