TN-DOT3-OAM-MIB Table View

The tnDot3OamTable is used to store proprietary configuration
information on a particular Ethernet like interface (OAM entity)
in the system that supports the OAM functions defined in [802.3ah].

tnDot3OamEntry row .1.3.6.1.4.1.7483.6.1.2.42.1.1.1

An entry in the tnDot3OamTable containing configuration
information applicable to an OAM entity.

Indexes

No indexes recorded

Column	Syntax	OID
tnDot3OamLastChanged The value of tnDot3OamLastChanged indicates the sysUpTime value when this row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.42.1.1.1.1
tnDot3OamInterval The value of tnDot3OamInterval specifies the number of 100ms time intervals between each periodic OAMPDU transmit and receive. A lower value implies that OAMPDUs will be transmitted more frequently to the peer, and OAMP…	100s of millisecondsUnsigned32r/w Constraints: range: 1-600	.1.3.6.1.4.1.7483.6.1.2.42.1.1.1.2
tnDot3OamMultiplier The value of tnDot3OamMultiplier specifies how many receive intervals may expire with no OAMPDU receive. After the configured number of intervals with OAMPDU receive have passed, the OAM negotiation process will restar…	Unsigned32r/w Constraints: range: 2-5	.1.3.6.1.4.1.7483.6.1.2.42.1.1.1.3
tnDot3OamTunneling The value of tnDot3OamTunneling specifies if OAMPDUs should be passed transparently through the OAM entity for processing by another OAM entity across the network, or if OAMPDUs should be terminated and processed at the…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.42.1.1.1.4
tnDot3OamLooped The value of tnDot3OamLooped indicates if the OAM entity is receiving OAMPDUs that it transmitted. A value of 'true' indicates that the OAM entity is receiving it's own OAMPDUs while a value of 'false' indicates it is …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.6.1.2.42.1.1.1.5
tnDot3OamHoldTime The value of tnDot3OamHoldTime specifies the number of seconds the efm-oam protocol should wait after dot3OamOperStatus transitions from 'operational (9)' to a non-operational state before going back to the 'operational…	secondsUnsigned32r/w Constraints: range: 0-50	.1.3.6.1.4.1.7483.6.1.2.42.1.1.1.6

The tnDot3OamLoopbackTable is used to store proprietary
loopback configuration information on a particular
Ethernet like interface (OAM entity) in the system that supports
the OAM functions defined in [802.3ah].

tnDot3OamLoopbackEntry row .1.3.6.1.4.1.7483.6.1.2.42.2.1.1

An entry in the tnDot3OamLoopbackTable containing
configuration information applicable to an OAM entity.

Indexes

No indexes recorded

Column	Syntax	OID
tnDot3OamLoopbackLastChanged The value of tnDot3OamLoopbackLastChanged indicates the sysUpTime value when this row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.7483.6.1.2.42.2.1.1.1
tnDot3OamLoopbackLocalStatus The value of tnDot3OamLoopbackLocalStatus indicates the local loopback status of the OAM entity. This attribute allows the user to manually set the local OAM entity loopback mode overriding the 802.3ah protocol for loo…	Enumerationr/w Enumerated Values: 1 noLoopback 2 localLoopback	.1.3.6.1.4.1.7483.6.1.2.42.2.1.1.2