TIMETRA-SDP-MIB Table View

svcTlsBgpADPWTempBindTable contains entries for the associations
between SDP Auto-Bind policies and a BGP Auto-Discovery context for a
VPLS service.

svcTlsBgpADPWTempBindEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.33.1

A SDP Auto-Bind Policy entry in the svcTlsBgpADPWTempBindTable.

Indexes

TIMETRA-SERV-MIBsvcId pwTemplateId

Column	Syntax	OID
svcTlsBgpADPWTempBindRowStatus The value of svcTlsBgpADPWTempBindRowStatus is used for the creation and deletion of associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VPLS service.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.1
svcTlsBgpADPWTempBindLastChngd The value of svcTlsBgpADPWTempBindLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local n…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.2
svcTlsBgpADPWTempBindSHG The value of svcTlsBgpADPWTempBindSHG specifies the split-horizon group to associate with the SDP Auto-Bind policy in this BGP Auto-Discovery context in a VPLS service. When this Auto-Bind policy is used …	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.3
svcTlsBgpADPWTempBindOperGrp The value of the svcTlsBgpADPWTempBindOperGrp specifies the Operational-Group identifier associated with this pseudo-wire template binding.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.4
svcTlsBgpADPWTempBindCreatOrigin The value of svcTlsBgpADPWTempBindCreatOrigin indicates the mechanism used to create this entry.	TIMETRA-TC-MIBTmnxCreateOrigin Type Values: 1 manual 2 bgp-l2vpn 3 radius 4 bgpSignalL2vpn 5 multiSegmentPW 6 vplsPmsi 7 dynScript 8 bof 9 bgpSignalVpws 12 vsd 13 evpn 14 vsd-sd 15 satellites 16 fpe 17 evpnIsa 18 greBridged 19 tli 20 pdn 23 ipsec 24 esa 25 pfcpCups 26 manual-mci	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.5
svcTlsBgpADPWTempBindBfdTemplate The value of the svcTlsBgpADPWTempBindBfdTemplate specifies the BFD template name associated with this pseudo-wire template binding.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.6
svcTlsBgpADPWTempBindBfdEnable The value of svcTlsBgpADPWTempBindBfdEnable specifies whether BFD is enabled on this pseudo-wire template binding.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.7
svcTlsBgpADPWTempBindBfdEncap The value of svcTlsBgpADPWTempBindBfdEncap specifies the BFD encapsulation used on this pseudo-wire template binding.	TIMETRA-TC-MIBTmnxBfdEncapr/w Type Values: 1 ipv4	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.8
svcTlsBgpADPWTempBindMonOperGrp The value of the svcTlsBgpADPWTempBindMonOperGrp specifies the monitoring operational-group identifier associated with this pseudo-wire template binding.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.2.33.1.9

svcTlsBgpADPWTempBindTable contains entries for Route Targets
associated with a SDP Auto-Bind policy and a BGP Auto-Discovery
context for a VPLS service.

svcTlsBgpADPWTempBindRTEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.35.1

A SDP Auto-Bind Policy Route Target entry in the
svcTlsBgpADPWTempBindRTTable.

Indexes

TIMETRA-SERV-MIBsvcId pwTemplateId svcTlsBgpADPWTempBindRT

Column	Syntax	OID
svcTlsBgpADPWTempBindRT The value of svcTlsBgpADPWTempBindRT is the Route Target associated with a PW template and a BGP Auto-Discovery context for a VPLS service. When advertisements are received with this Route Target, the PW …	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.2.35.1.1
svcTlsBgpADPWTempBindRTRowStat The value of svcTlsBgpADPWTempBindRTRowStat is used for the association of Route Targets with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VPLS service.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.35.1.2

svcL2RteTable contains entries for L2 routes.

svcL2RteEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.39.1

An L2 route entry in the svcL2RteTable.

Indexes

TIMETRA-SERV-MIBsvcId svcL2RteVsiPrefix svcL2RteRouteDistinguisher svcL2RteNextHopType svcL2RteNextHop

Column	Syntax	OID
svcL2RteVsiPrefix The value of svcL2RteVsiPrefix is the low-order 4 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.1
svcL2RteRouteDistinguisher The value of svcL2RteRouteDistinguisher is the high-order 6 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.	TIMETRA-TC-MIBTmnxVPNRouteDistinguisher Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.2
svcL2RteNextHopType The value of svcL2RteNextHopType indicates the address type of svcL2RteNextHop.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.3
svcL2RteNextHop The value of svcL2RteNextHop indicates the IP next hop for this L2 route. This value is equivalent to the IP address of the Far End of this L2 route.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.4
svcL2RteSdpBindId The value of svcL2RteSdpBindId indicates the SDP bind ID of the SDP bind that binds this VPLS context to the VSI indicated by svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop. The value …	TIMETRA-TC-MIBSdpBindId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.5
svcL2RtePwTemplateId The value of svcL2RtePwTemplateId indicates the PW template associated with the SDP bind that binds this VPLS context to the VSI indicated by svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop.	TIMETRA-SERV-MIBPWTemplateId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.6
svcL2RteError The value of svcL2RteError indicates an error message describing an error encountered when establishing this L2 route entry. The value of svcL2RteError will be a zero-length string when the L2 route is successfully esta…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.7
svcL2RteLastErrorTime The value of svcL2RteLastErrorTime indicates the sysUpTime at the time of the last error for this L2 route entry. If no errors were encountered for this entry since the last re-initialization of the local…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.8
svcL2RteStatus The value of svcL2RteStatus indicates the status of the this L2 Route.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6527.3.1.2.4.2.39.1.9

svcL2BgpVplsRteTable contains entries for L2 routes.

svcL2BgpVplsRteEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.84.1

An L2 route entry in the svcL2BgpVplsRteTable.

Indexes

TIMETRA-SERV-MIBsvcId svcL2BgpVplsRteVeId svcL2BgpVplsRteRD svcL2BgpVplsRteNextHopType svcL2BgpVplsRteNextHop

Column	Syntax	OID
svcL2BgpVplsRteVeId The value of svcL2BgpVplsRteVeId is the low-order 4 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.	TIMETRA-SERV-MIBTmnxSiteId Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.1
svcL2BgpVplsRteRD The value of svcL2BgpVplsRteRD is the high-order 6 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.	TIMETRA-TC-MIBTmnxVPNRouteDistinguisher Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.2
svcL2BgpVplsRteNextHopType The value of svcL2BgpVplsRteNextHopType indicates the address type of svcL2BgpVplsRteNextHop.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.3
svcL2BgpVplsRteNextHop The value of svcL2BgpVplsRteNextHop indicates the IP next hop for this L2 route. This value is equivalent to the IP address of the Far End of this L2 route.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.4
svcL2BgpVplsRteSdpBindId The value of svcL2BgpVplsRteSdpBindId indicates the SDP bind ID of the SDP bind that binds this VPLS context to the VSI indicated by svcL2BgpVplsRteRD, svcL2BgpVplsRteVeId, and svcL2BgpVplsRteNextHop. The…	TIMETRA-TC-MIBSdpBindId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.5
svcL2BgpVplsRtePwTemplateId The value of svcL2BgpVplsRtePwTemplateId indicates the PW template associated with the SDP bind that binds this VPLS context to the VSI indicated by svcL2BgpVplsRteRD, svcL2BgpVplsRteVeId, and svcL2BgpVplsRteNextHop.	TIMETRA-SERV-MIBPWTemplateId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.6
svcL2BgpVplsRteError The value of svcL2BgpVplsRteError indicates an error message describing an error encountered when establishing this L2 route entry. The value of svcL2BgpVplsRteError will be a zero-length string when the L2 route is suc…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.7
svcL2BgpVplsRteLastErrorTime The value of svcL2BgpVplsRteLastErrorTime indicates the sysUpTime at the time of the last error for this L2 route entry. If no errors were encountered for this entry since the last re-initialization of th…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.8
svcL2BgpVplsRteControlWord The value of svcL2BgpVplsRteControlWord indicates the control word advertised for this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.9
svcL2BgpVplsRtePathMtu The value of svcL2BgpVplsRtePathMtu indicates the layer-2 path MTU for the pseudo-wire to the PE for this route.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.10
svcL2BgpVplsRteState The value of svcL2BgpVplsRteState indicates state of the object for this route.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.11
svcL2BgpVplsRteSeqDelivery The value of svcL2BgpVplsRteSeqDelivery indicates the sequenced delivery flag advertised for this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.12
svcL2BgpVplsRteDF The value of svcL2BgpVplsRteDF indicates the value of DF bit associated with this BGP VPLS L2 route entry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.13
svcL2BgpVplsRteStatus The value of svcL2BgpVplsRteStatus indicates the status of the this BGP VPLS L2 Route.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6527.3.1.2.4.2.84.1.14

svcVllBgpADPWTempBindTable contains entries for the associations
between SDP Auto-Bind policies and a BGP Auto-Discovery context for a
VLL service.

svcVllBgpADPWTempBindEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.144.1

A SDP Auto-Bind Policy entry in the svcVllBgpADPWTempBindTable.

Indexes

TIMETRA-SERV-MIBsvcId pwTemplateId

Column	Syntax	OID
svcVllBgpADPWTempBindRowStatus The value of svcVllBgpADPWTempBindRowStatus is used for the creation and deletion of associations between SDP Auto-Bind policies and a BGP Auto-Discovery context for a VLL service.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.144.1.1
svcVllBgpADPWTempBindLastChngd The value of svcVllBgpADPWTempBindLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local n…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.144.1.2
svcVllBgpADPWTempBindEndPt The value of the svcVllBgpADPWTempBindEndPt specifies the endpoint associated with this pseudo-wire template binding.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.2.144.1.3
svcVllBgpADPWTempBindBfdTemplate The value of the svcVllBgpADPWTempBindBfdTemplate specifies the BFD template name associated with this pseudo-wire template binding.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.2.144.1.4
svcVllBgpADPWTempBindBfdEnable The value of svcVllBgpADPWTempBindBfdEnable specifies whether BFD is enabled on this pseudo-wire template binding.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.2.144.1.5
svcVllBgpADPWTempBindBfdEncap The value of svcVllBgpADPWTempBindBfdEncap specifies the BFD encapsulation used on this pseudo-wire template binding.	TIMETRA-TC-MIBTmnxBfdEncapr/w Type Values: 1 ipv4	.1.3.6.1.4.1.6527.3.1.2.4.2.144.1.6

svcVllBgpADPWTempBindTable contains entries for Route Targets
associated with a SDP Auto-Bind policy and a BGP Auto-Discovery
context for a VLL service.

svcVllBgpADPWTempBindRTEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.146.1

A SDP Auto-Bind Policy Route Target entry in the
svcVllBgpADPWTempBindRTTable.

Indexes

TIMETRA-SERV-MIBsvcId pwTemplateId svcVllBgpADPWTempBindRT

Column	Syntax	OID
svcVllBgpADPWTempBindRT The value of svcVllBgpADPWTempBindRT is the Route Target associated with a PW template and a BGP Auto-Discovery context for a VLL service. When advertisements are received with this Route Target, the PW t…	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.4.2.146.1.1
svcVllBgpADPWTempBindRTRowStat The value of svcVllBgpADPWTempBindRTRowStat is used for the association of Route Targets with a SDP Auto-Bind policy and a BGP Auto-Discovery context for a VLL service.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.2.146.1.2

The svcL2BgpVpwsRteTable contains entries for BGP VPWS (Virtual
Private Wire Service) L2 routes.

svcL2BgpVpwsRteEntry row .1.3.6.1.4.1.6527.3.1.2.4.2.147.1

The svcL2BgpVpwsRteEntry is an BGP VPWS L2 route entry in the
svcL2BgpVpwsRteTable.

Indexes

TIMETRA-SERV-MIBsvcId svcL2BgpVpwsRteVeId svcL2BgpVpwsRteRD svcL2BgpVpwsRteNextHopType svcL2BgpVpwsRteNextHop

Column	Syntax	OID
svcL2BgpVpwsRteVeId The value of svcL2BgpVpwsRteVeId is the low-order 4 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.	TIMETRA-SERV-MIBTmnxSiteId Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.1
svcL2BgpVpwsRteRD The value of svcL2BgpVpwsRteRD is the high-order 6 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route.	TIMETRA-TC-MIBTmnxVPNRouteDistinguisher Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.2
svcL2BgpVpwsRteNextHopType The value of svcL2BgpVpwsRteNextHopType indicates the address type of svcL2BgpVpwsRteNextHop.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.3
svcL2BgpVpwsRteNextHop The value of svcL2BgpVpwsRteNextHop indicates the IP next hop for this L2 route. This value is equivalent to the IP address of the Far End of this L2 route.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.4
svcL2BgpVpwsRteSdpBindId The value of svcL2BgpVpwsRteSdpBindId indicates the SDP bind ID of the SDP bind that binds this VPWS context to the VSI indicated by svcL2BgpVpwsRteRD, svcL2BgpVpwsRteVeId, and svcL2BgpVpwsRteNextHop. The…	TIMETRA-TC-MIBSdpBindId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.5
svcL2BgpVpwsRtePwTemplateId The value of svcL2BgpVpwsRtePwTemplateId indicates the PW template associated with the SDP bind that binds this VPWS context to the VSI indicated by svcL2BgpVpwsRteRD, svcL2BgpVpwsRteVeId, and svcL2BgpVpwsRteNextHop.	TIMETRA-SERV-MIBPWTemplateId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.6
svcL2BgpVpwsRteError The value of svcL2BgpVpwsRteError indicates an error message describing an error encountered when establishing this L2 route entry. The value of svcL2BgpVpwsRteError will be a zero-length string when the L2 route is suc…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.7
svcL2BgpVpwsRteLastErrorTime The value of svcL2BgpVpwsRteLastErrorTime indicates the sysUpTime at the time of the last error for this L2 route entry. If no errors were encountered for this entry since the last re-initialization of th…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.8
svcL2BgpVpwsRteControlWord The value of svcL2BgpVpwsRteControlWord indicates the control word advertised for this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.9
svcL2BgpVpwsRtePathMtu The value of svcL2BgpVpwsRtePathMtu indicates the layer-2 path MTU for the pseudo-wire to the PE for this route.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.10
svcL2BgpVpwsRteState The value of svcL2BgpVpwsRteState indicates state of the object for this route.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.11
svcL2BgpVpwsRteSeqDelivery The value of svcL2BgpVpwsRteSeqDelivery indicates the sequenced delivery flag advertised for this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.12
svcL2BgpVpwsRteStatus The value of svcL2BgpVpwsRteStatus indicates the status of the this BGP VPWS L2 Route.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.13
svcL2BgpVpwsRteCsv The value of svcL2BgpVpwsRteCsv indicates the circuit status vector for this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.14
svcL2BgpVpwsRteTxStatus The value of svcL2BgpVpwsRteTxStatus indicates the transmit side status of the this BGP VPWS L2 Route.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.15
svcL2BgpVpwsRtePreference The value of svcL2BgpVpwsRtePreference indicates the preference value for this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.2.147.1.16

A table that contains SDP information.

sdpInfoEntry row .1.3.6.1.4.1.6527.3.1.2.4.4.3.1

Information about a specific SDP.

Indexes

sdpId

Column	Syntax	OID
sdpId SDP identifier.	TIMETRA-SERV-MIBSdpId Type Constraints: range: 0..32767	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.1
sdpRowStatus This object specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, the corresponding SDP must be administratively down, no…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.2
sdpDelivery This object specifies the type of delivery used by this SDP. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.	Enumerationr/w Enumerated Values: 1 gre 2 mpls 4 l2tpv3 5 greethbridged	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.3
sdpFarEndIpAddressobsolete This object specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. If sdpTunnelFarEndIpAddress is not set, then sdpFarEndIpAddress also specifies the remote end of the TLDP session. …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.4
sdpLspListobsolete When the SDP delivery specified by sdpDelivery is 'mpls', this object specifies the list of LSPs used to reach the far-end ESR device. All the LSPs in this list must terminate at the IP address specified …	TIMETRA-SERV-MIBLspIdListr/w Type Constraints: range: 0..68	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.5
sdpDescription Generic information about this SDP.	TIMETRA-SERV-MIBServObjDescr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.6
sdpLabelSignaling This object specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on this SDP. When the value of this object is 'none' then the labels are manually assigne…	Enumerationr/w Enumerated Values: 1 none 2 tldp 3 bgp	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.7
sdpAdminStatus The desired state of this SDP.	TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.8
sdpOperStatus The operating state of this SDP. The value 'notAlive' is valid only when keep-alive is enabled, and it means that the keep-alive operating status is not alive. The value 'notReady' is valid only when this SDP uses a lab…	Enumeration Enumerated Values: 1 up 2 notAlive 3 notReady 4 invalidEgressInterface 5 transportTunnelDown 6 down	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.9
sdpAdminPathMtu This object specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. The default value of zero indicates th…	Integer32r/w Constraints: range: 0-0 range: 576-9782	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.10
sdpOperPathMtu This object indicates the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end ESR, without requiring the packet to be fragmented. In order to be able to bind this SDP to…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.11
sdpKeepAliveAdminStatus This object is used to enable or disable the keep-alive protocol used to determine the operating status of this SDP.	TIMETRA-TC-MIBTmnxEnabledDisabledAdminStater/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.12
sdpKeepAliveOperStatus The current status of the keep-alive protocol. The value 'alive' indicates that the far-end ESR is replying the SDP Echo Requests messages sent by this device indicating no error condition. The value 'noResponse' indica…	Enumeration Enumerated Values: 1 alive 2 noResponse 3 senderIdInvalid 4 responderIdError 5 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.13
sdpKeepAliveHelloTime This object specifies how often the SDP Echo Request messages are transmitted on this SDP.	secondsInteger32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.14
sdpKeepAliveMaxDropCount This object specifies the maximum number of consecutive SDP Echo Request messages that can be unacknowledged before the keep-alive protocol reports a fault.	Integer32r/w Constraints: range: 1-5	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.15
sdpKeepAliveHoldDownTime This object specifies the amount of time to wait before the keep-alive operating status is eligible to enter the 'alive' state.	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.16
sdpLastMgmtChange The value of sysUpTime at the time of the most recent management-initiated change to this SDP.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.17
sdpKeepAliveHelloMessageLength This object specifies the length of the SDP Echo Request messages transmitted on this SDP. The default value of zero indicates that the message length should be equal to the SDP's operating path MTU, as specified by sdp…	Integer32r/w Constraints: range: 0-0 range: 40-9198	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.18
sdpKeepAliveNumHelloRequestMessages The number of SDP Echo Request messages transmitted since the keep-alive was administratively enabled or the counter was cleared.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.19
sdpKeepAliveNumHelloResponseMessages The number of SDP Echo Response messages received since the keep-alive was administratively enabled or the counter was cleared.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.20
sdpKeepAliveNumLateHelloResponseMessages The number of SDP Echo Response messages received after the corresponding Request timeout timer expired.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.21
sdpKeepAliveHelloRequestTimeout The number of seconds to wait for an SDP Echo Response message before declaring a timeout.	secondsInteger32r/w Constraints: range: 1-10	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.22
sdpLdpEnabled When the value of this object is 'true' the transport LSPs are signalled by LDP, as opposed to being provisioned static or RSVP-signalled LSPs. This object applies only to MPLS SDPs.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.23
sdpVlanVcEtype This object specifies the Ethertype used in frames sent out this SDP, when the VC type is vlan.	Unsigned32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.24
sdpAdvertisedVllMtuOverride When the value of this object is 'true' the advertised MTU of a VLL spoke SDP bind includes the 14-byte L2 header, so that it is backward compatible with pre-2.0 software.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.25
sdpOperFlags This object indicates all the conditions that affect the operating status of this SDP.	Bits Enumerated Values: 0 sdpAdminDown 1 signalingSessionDown 2 transportTunnelDown 3 keepaliveFailure 4 invalidEgressInterface 5 noSystemIpAddress 6 transportTunnelUnstable 7 notOnBindingPort	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.26
sdpLastStatusChange The value of sysUpTime at the time of the most recent operating status change to this SDP.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.27
sdpMvplsMgmtService The value of sdpMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this SDP. This object is only valid if sdpMvplsMgmtService is different from 0.	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.28
sdpMvplsMgmtSdpBndId The value of sdpMvplsMgmtSdpBndId indicates which SDP bind in the mVPLS instance specified in sdpMvplsMgmtService is controlling this SDP. This object is only valid if sdpMvplsMgmtService is different from 0.	TIMETRA-TC-MIBSdpBindId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.29
sdpCollectAcctStats The value of the object sdpCollectAcctStats specifies whether the agent collects accounting statistics for this SDP. When the value is 'true' the agent collects accounting statistics on this SDP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.30
sdpAccountingPolicyId The value of sdpAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP. The value zero indicates that the agent should use the default accounting policy, if one exists.	Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.31
sdpClassFwdingEnabled The value of sdpClassFwdingEnabled specifies the admin state of class-based forwarding on this SDP. When the value is 'true', class-based forwarding is enabled.	TIMETRA-TC-MIBTmnxAdminStateTruthValuer/w	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.32
sdpClassFwdingDefaultLsp The value of sdpClassFwdingDefaultLsp specifies the LSP ID that is used as a default when class-based forwarding is enabled on this SDP. This object must be set when enabling class-based forwarding.	TIMETRA-TC-MIBTmnxVRtrMplsLspIDr/w Type Constraints: range: 0..131070	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.33
sdpClassFwdingMcLsp The value of sdpClassFwdingMcLsp specifies the LSP ID that all multicast traffic will be forwarded on when class-based forwarding is enabled on this SDP. When this object has its default value, multicast traffic will be…	TIMETRA-TC-MIBTmnxVRtrMplsLspIDr/w Type Constraints: range: 0..131070	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.34
sdpMetric The value of sdpMetric specifies the metric to be used within the Tunnel Table Manager for decision making purposes. When multiple SDPs going to the same destination exist, this value is used as a tiebreaker by Tunnel T…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.35
sdpAutoSdp The value of sdpAutoSdp indicates whether this is an Auto generated SDP from RADIUS discovery or BGP auto-discovery.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.36
sdpSnmpAllowedobsolete The value of sdpSnmpAllowed indicates if SNMP sets are allowed on this SDP.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.37
sdpPBBEtype This object specifies the Ethertype used in frames sent out on this SDP when sdpBindVcType is 'vlan' for Provider Backbone Bridging frames.	Unsigned32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.38
sdpBandwidthBookingFactor sdpBandwidthBookingFactor is used to calculate the max SDP available bandwidth. The value of sdpBandwidthBookingFactor specifies the percentage of the SDP max available bandwidth for VLL call admission. When the value …	Unsigned32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.39
sdpOperBandwidth The value of sdpOperBandwidth indicates the operational Bandwidth in kilobits per seconds (Kbps) available for this SDP. The value sdpOperBandwidth is determined by the sum of the bandwidth of all the RSVP LSPs used by …	kilobpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.40
sdpAvailableBandwidth The value of sdpAvailableBandwidth indicates the Bandwidth that is still free for booking by the SDP bindings on the SDP.	kilobpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.41
sdpMaxBookableBandwidth The value of sdpMaxBookableBandwidth indicates the max Bandwidth that the SDP has for booking by the SDP bindings. The value of sdpMaxBookableBandwidth is calculated as follow: sdpMaxBookableBandwidth = s…	kilobpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.42
sdpBookedBandwidth The value of sdpBookedBandwidth indicates the SDP Bandwidth that has been booked by the SDP bindings.	kilobpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.43
sdpCreationOrigin The value of sdpCreationOrigin indicates the protocol or mechanism which created this SDP.	TIMETRA-TC-MIBTmnxCreateOrigin Type Values: 1 manual 2 bgp-l2vpn 3 radius 4 bgpSignalL2vpn 5 multiSegmentPW 6 vplsPmsi 7 dynScript 8 bof 9 bgpSignalVpws 12 vsd 13 evpn 14 vsd-sd 15 satellites 16 fpe 17 evpnIsa 18 greBridged 19 tli 20 pdn 23 ipsec 24 esa 25 pfcpCups 26 manual-mci	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.44
sdpEnforceDiffServLspFc The value of sdpEnforceDiffServLspFc specifies whether service manager must validate with RSVP the support of the FC by the LSP. By default, the SDP uses the direct configuration without validation with R…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.45
sdpMixedLspModeEnabled The value of sdpMixedLspModeEnabled specifies whether mixed mode LSPs is enabled on this SDP. Setting the value to 'true' allows LDP to be enabled and LSPs to be configured at the same time on this SDP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.46
sdpLspRevertTime The value of sdpLspRevertTime specifies the time to wait before reverting back from LDP to the configured LSPs, after having failed over to LDP. When the value is -1, the sdp will never revert back.	secondsInteger32r/w Constraints: range: -1-600	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.47
sdpLspRevertTimeCountDown The value of sdpLspRevertTimeCountDown indicated the timer countdown before reverting back from LDP on this SDP. The timer countdown begins after the first configured LSP becomes active. The value of -1 i…	secondsInteger32 Constraints: range: -1-600	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.48
sdpLdpLspId The value of sdpLdpLspId indicates the Id for the LDP LSP if sdpLdpEnabled is set to 'true' and there is a valid LDP route to the sdpFarEndIpAddress or sdpFarEndNodeId.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.49
sdpLdpActiveobsolete The value of sdpLdpActive indicates whether LDP is active for the current SDP.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.50
sdpNetDomainName The value of sdpNetDomainName specifies the network-domain name this SDP is associated with. The network-domain defines the list of network interfaces this SDP can send traffic on. The default value of th…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.51
sdpEgressIfsNetDomainConsistent The value of sdpEgressIfsNetDomainConsistent indicates whether all the egress network interfaces that can carry traffic on this SDP are associated with the network-domain configured on this SDP. A value o…	Enumeration Enumerated Values: 1 notApplicable 2 consistent 3 inconsistent	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.52
sdpBgpTunnelEnabled The value of sdpBgpTunnelEnabled specifies whether the transport tunnel is BGP as opposed to LDP or RSVP signalled LSPs. This value cannot be set to 'true' if sdpLdpEnabled is 'true' or if there is at lea…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.53
sdpBgpTunnelLspId The value of sdpBgpTunnelLspId indicates the Id for the BGP Tunnel LSP if sdpBgpTunnelEnabled is set to 'true' and there is a valid LDP route to the sdpFarEndIpAddress.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.54
sdpTunnelFarEndIpAddressobsolete The value of sdpTunnelFarEndIpAddress specifies the IP address of the remote end of the transport tunnel for this SDP. The value can only be changed while the admin status of the SDP is 'down'. …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.55
sdpActiveLspType The value of sdpActiveLspType indicates the type of LSP that is currently active on this SDP. For sdpDelivery 'gre', the value is always 'not-applicable'. For sdpDelivery 'mpls', the values…	Enumeration Enumerated Values: 0 not-applicable 1 rsvp 2 ldp 3 bgp 4 none 5 mplsTp 6 srIsis 7 srOspf 8 srTeLsp 9 fpe	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.56
sdpBindingPort The value of sdpBindingPort specifies the port id for the binding on this SDP. The value of sdpPwPortOperStatus will be set to 'down' of all the related SDP pseudo-wire ports, if the SDP resolves to anoth…	TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.57
sdpFarEndNodeId The value of sdpFarEndNodeId specifies the node identifier of the far-end for this sdp. The value of this object must be set to a non-default value when the sdpDelivery is set to 'mpls' for the row to bec…	TIMETRA-TC-MIBTmnxMplsTpNodeIDr/w	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.58
sdpFarEndGlobalId The value of sdpFarEndGlobalId specifies the global identifier of the far-end for this sdp.	TIMETRA-TC-MIBTmnxMplsTpGlobalIDr/w	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.59
sdpFarEndInetAddressType The value of the object sdpFarEndInetAddressType specifies the address type of sdpFarEndInetAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.60
sdpFarEndInetAddress The value of sdpFarEndInetAddress object specifies the IP address of the remote end of the tunnel defined by this SDP.	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.61
sdpLocalEndInetAddressType The value of the object sdpLocalEndInetAddressType specifies the address type of sdpLocalEndInetAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.62
sdpLocalEndInetAddress The value of sdpLocalEndInetAddress object specifies the IP address of the local end of the tunnel defined by this SDP. An 'inconsistentValue' error is returned when sdpLocalEndInetAddress is set to non-d…	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.63
sdpSourceBMacLSB The value of sdpSourceBMacLSB specifies the 16 least significant bits (lsb) which when combined with the 32 most significant bits of the PBB source-bmac specified by svcPbbSrcBVplsMacAddr, forms the virtual backbone MAC…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.64
sdpControlPWVCId The value of sdpControlPWVCId specifies the spoke-SDP VC identifier to be used as a control pseudo-wire to determine whether Shortest Path Bridging Module (SPBM) advertises the virtual backbone MAC. An 'i…	TIMETRA-TC-MIBTmnxVcIdOrNoner/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.65
sdpControlPWIsActive The value of sdpControlPWIsActive indicates whether control pseudo-wire is considered active on the Backbone Edge Bridge (BEB).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.66
sdpTunnelFarEndInetAddressType The value of sdpTunnelFarEndInetAddressType specifies the address type of sdpTunnelFarEndInetAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.67
sdpTunnelFarEndInetAddress The value of sdpTunnelFarEndInetAddress specifies the IP address of the remote end of the transport tunnel for this SDP. This address must be different from sdpFarEndInetAddress. The value …	OctetStringr/w Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.68
sdpGreAllowFragmentation The value of sdpGreAllowFragmentation specifies whether to allow GRE encapsulated packets to be sent without setting the DF bit for this SDP. This object is valid only when sdpDelivery is set to 'gre'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.69
sdpFpeLspId The value of sdpFpeLspId indicates the identifier for the forward-path-extension LSP when the SDP is created using 'fpe'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.70
sdpWeightedEcmpEnabled The value of sdpWeightedEcmpEnabled specifies the packets forwarded to a set of ECMP tunnel next-hops which will be sprayed proportionally to the load balancing weights configured for each LSP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.71
sdpOperTunnelFarEndInetAddrType The value of sdpOperTunnelFarEndInetAddrType indicates the address type of sdpOperTunnelFarEndInetAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.72
sdpOperTunnelFarEndInetAddr The value of sdpOperTunnelFarEndInetAddr indicates the operational IP address of the remote end of the transport tunnel for this SDP. If sdpTunnelFarEndInetAddress is not set, it will take the value from …	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.4.4.3.1.73

A table that contains SDP binding information.

sdpBindEntry row .1.3.6.1.4.1.6527.3.1.2.4.4.4.1

Information about a specific SDP binding.

Indexes

TIMETRA-SERV-MIBsvcId sdpBindId

Column	Syntax	OID
sdpBindId SDP Binding identifier.	TIMETRA-TC-MIBSdpBindId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.1
sdpBindRowStatus This object specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.2
sdpBindAdminIngressLabel The static MPLS VC label used by the far-end device to send packets to this device in this service via this SDP. Normal range of (2048..18431) is used unless changed by the user.	Unsigned32r/w Constraints: range: 0-1048575	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.3
sdpBindAdminEgressLabel The static MPLS VC label used by this device to send packets to the far-end device in this service via this SDP.	Unsigned32r/w Constraints: range: 0-0 range: 16-1048575	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.4
sdpBindOperIngressLabel The MPLS label used by the far-end device to send packets to this device in this service via this SDP. This label is either sdpBindAdminIngressLabel, if not null, or the one obtained via the SDP's signaling protocol.	Unsigned32 Constraints: range: 0-1048575	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.5
sdpBindOperEgressLabel The MPLS label used by this device to send packets to the far-end device in this service via this SDP. This label is either sdpBindAdminEgressLabel, if not null, or the one obtained via the SDP's signaling protocol.	Unsigned32 Constraints: range: 0-1048575	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.6
sdpBindAdminStatus The desired state of this Service-SDP binding.	TIMETRA-TC-MIBServiceAdminStatusr/w Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.7
sdpBindOperStatus The value of sdpBindOperStatus indicates the operating status of this Service-SDP binding. 'up' The Service-SDP binding is operational. 'noEgressLabel' The ingress label is availabl…	Enumeration Enumerated Values: 1 up 2 noEgressLabel 3 noIngressLabel 4 noLabels 5 down 6 svcMtuMismatch 7 sdpPathMtuTooSmall 8 sdpNotReady 9 sdpDown 10 sapDown	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.8
sdpBindLastMgmtChange The value of sysUpTime at the time of the most recent management-initiated change to this Service-SDP binding.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.9
sdpBindType This object specifies whether this Service SDP binding is a spoke or a mesh. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'.	Enumerationr/w Enumerated Values: 1 spoke 2 mesh	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.10
sdpBindIngressMacFilterId The row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified.	TIMETRA-FILTER-MIBTConfigOrVsdFilterIDr/w Type Constraints: range: 0..65535 range: 67108865..67174399	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.11
sdpBindIngressIpFilterId The row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified.	TIMETRA-FILTER-MIBTConfigOrVsdFilterIDr/w Type Constraints: range: 0..65535 range: 67108865..67174399	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.12
sdpBindEgressMacFilterId The row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified.	TIMETRA-FILTER-MIBTFilterIDr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.13
sdpBindEgressIpFilterId The row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified.	TIMETRA-FILTER-MIBTFilterIDr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.14
sdpBindVpnId The VPN ID of the associated service.	TIMETRA-SERV-MIBVpnId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.15
sdpBindCustId The Customer ID of the associated service.	TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.16
sdpBindVcType The value of sdpBindVcType is an enumerated integer that specifies the type of virtual circuit (VC) associated with the SDP binding. The value 'vpls' is no longer supported.	TIMETRA-SERV-MIBSdpBindVcTyper/w Type Values: 1 undef 2 ether 4 vlan 5 mirror 6 atmSdu 7 atmCell 8 atmVcc 9 atmVpc 10 frDlci 11 ipipe 12 satopE1 13 satopT1 14 satopE3 15 satopT3 16 cesopsn 17 cesopsnCas	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.17
sdpBindVlanVcTag	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.18
sdpBindSplitHorizonGrp This value of the object sdpBindSplitHorizonGrp specifies the name of the split-horizon group where the spoke SDP Bind belongs to. This object can be set only at the time the row is created and is mutually exclusive wit…	TIMETRA-SERV-MIBServObjNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.19
sdpBindOperFlags This object indicates all the conditions that affect the operating status of this SDP Bind. The bit values are as follows: sdpBindAdminDown (0) - SDP Bind is admin down. svcAdminDow…	Bits Enumerated Values: 0 sdpBindAdminDown 1 svcAdminDown 2 stitchingSvcTxDown 3 sdpOperDown 4 sdpPathMtuTooSmall 5 noIngressVcLabel 6 noEgressVcLabel 7 svcMtuMismatch 8 vcTypeMismatch 9 relearnLimitExceeded 10 iesIfAdminDown 11 releasedIngressVcLabel 12 labelsExhausted 13 svcParamMismatch 14 insufficientBandwidth 15 pwPeerFaultStatusBits 16 meshSdpDown 17 notManagedByMcRing 18 outOfResource 19 mhStandby 20 oamDownMepFault 21 oamUpMepFault 22 standbySigSlaveTxDown 23 operGrpDown 24 withdrawnIngressVcLabel 25 vplsPmsiDown 26 recProtSrcMac 27 peerFaultStatusTxDown 28 evpnRouteConflict 29 adminLocked 30 evpnP2mpConflict 31 labelStackLimitExceeded	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.20
sdpBindLastStatusChange The value of the object sdpBindLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to this SDP Bind.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.21
sdpBindIesIfIndex When this SDP Bind is defined on an IES service and the value of sdpBindType is 'spoke', this object specifies the index of the associated IES interface. The value of this object can be set only when the row is created …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.22
sdpBindMacPinning The value of the object sdpBindMacPinning specifies whether or not MAC address pinning is active on this SDP bind (mesh or spoke). Setting the value to enable disables relearning of MAC addresses on other SAPs or SDPs w…	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.23
sdpBindIngressIpv6FilterId The value of the object sdpBindIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified.	TIMETRA-FILTER-MIBTConfigOrVsdFilterIDr/w Type Constraints: range: 0..65535 range: 67108865..67174399	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.24
sdpBindEgressIpv6FilterId The value of the object sdpBindEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified.	TIMETRA-FILTER-MIBTFilterIDr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.25
sdpBindCollectAcctStats The value of the object sdpBindCollectAcctStats specifies whether the agent collects accounting statistics for this SDP bind. When the value is 'true' the agent collects accounting statistics on this SDP bind.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.26
sdpBindAccountingPolicyId The value of sdpBindAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP bind. The value zero indicates that the agent should use the default accounting policy, if one exists.	Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.27
sdpBindPwPeerStatusBits sdpBindPwPeerStatusBits indicates the bits set by the LDP peer when there is a fault on its side of the pseudowire. LAC failures occur on the SAP that has been configured on the PIPE service, PSN bits are set by SDP-bin…	Bits Enumerated Values: 0 pwNotForwarding 1 lacIngressFault 2 lacEgresssFault 3 psnIngressFault 4 psnEgressFault 5 pwFwdingStandby	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.28
sdpBindPeerVccvCvBits sdpBindPeerVccvCvBits indicates the CV type bits set by the LDP peer if it supports VCCV (Virtual Circuit Connection Verification) on a pseudowire. If the peer does not send VCCV information, or does not support it, th…	Bits Enumerated Values: 0 icmpPing 1 lspPing 2 bfdFaultDetection 3 bfdFaultDetectionAndSignalling	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.29
sdpBindPeerVccvCcBits sdpBindPeerVccvCcBits indicates the CC type bits set by the LDP peer if it supports VCCV (Virtual Circuit Connection Verification) on a pseudowire. If the peer does not send VCCV information, or does not support it, th…	Bits Enumerated Values: 0 pwe3ControlWord 1 mplsRouterAlertLabel 2 mplsPwDemultiplexorLabel	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.30
sdpBindControlWordBit sdpBindControlWordBit specifies whether the use of the 'ControlWord' is preferred or not. The value of sdpBindControlWordBit is exchanged with LDP peer during pseudowire negotiation time. The default value is determined…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.31
sdpBindOperControlWord sdpBindOperControlWord indicates whether the 'ControlWord' is used or not. The value of sdpBindOperControlWord is negotiated with the LDP peer. When both the local and the peer prefer the use of the 'ControlWord', sdpB…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.32
sdpBindEndPoint sdpBindEndPoint specifies the service endpoint to which this SDP bind is attached. The svcId of the SDP bind MUST match the svcId of the service endpoint.	TIMETRA-SERV-MIBServObjNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.33
sdpBindEndPointPrecedence sdpBindEndPointPrecedence specifies the precedence of this SDP bind when there are multiple SDP binds attached to one service endpoint. The value 0 can only be assigned to one SDP bind, making it the primary SDP bind. W…	Unsigned32r/w Constraints: range: 0-4	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.34
sdpBindIsICB sdpBindIsICB specifies whether this sdpBind is an inter-chassis backup SDP bind.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.35
sdpBindPwFaultInetAddressType The value of the object sdpBindPwFaultInetAddressType indicates the address type of sdpBindPwFaultInetAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.36
sdpBindPwFaultInetAddress The value of sdpBindPwFaultInetAddress indicates the IP address that was included in the pseudowire status message sent by the LDP peer. This value is only applicable if the peer is using the pseudowire status signalli…	OctetString Constraints: range: 0-0 range: 4-4 range: 16-16	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.37
sdpBindClassFwdingOperState The value of sdpBindClassFwdingOperState indicates the operational state of forwarding class based forwarding on this sdpBind. When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to 'false…	TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.38
sdpBindForceVlanVcForwarding The value of sdpBindForceVlanVcForwarding specifies whether or not vc-vlan-type forwarding is forced in the datapath for the sdp which have sdpBindVcType set to 'ether'. When set to 'true' vc-vlan-type forwarding is fo…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.39
sdpBindAdminBandwidth The value of the object sdpBindAdminBandwidth specifies the bandwidth that needs to be reserved for this SDP binding in kilobits per second. The SdpBindBandwidth object only applies to the SDP bindings under the epipe(1…	kilobpsTIMETRA-SERV-MIBSdpBindBandwidthr/w Type Constraints: range: 0..100000000	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.40
sdpBindOperBandwidth The value of the object sdpBindOperBandwidth indicates the bandwidth that has been reserved for this SDP binding in kilobits per second. The value 0 indicates that SDP doesn't have bandwidth to satisfy the bandwidth req…	kilobpsTIMETRA-SERV-MIBSdpBindBandwidth Type Constraints: range: 0..100000000	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.41
sdpBindCreationOrigin The value of sdpBindCreationOrigin indicates the protocol or mechanism which created this SDP binding.	TIMETRA-TC-MIBTmnxCreateOrigin Type Values: 1 manual 2 bgp-l2vpn 3 radius 4 bgpSignalL2vpn 5 multiSegmentPW 6 vplsPmsi 7 dynScript 8 bof 9 bgpSignalVpws 12 vsd 13 evpn 14 vsd-sd 15 satellites 16 fpe 17 evpnIsa 18 greBridged 19 tli 20 pdn 23 ipsec 24 esa 25 pfcpCups 26 manual-mci	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.42
sdpBindDescription The value of sdpBindDescription specifies a user-provided description for the SDP Bind.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.43
sdpBindSiteName The value of sdpBindSiteName indicates the site-name associated with this SDP Bind.	TIMETRA-TC-MIBTNamedItemOrEmpty Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.44
sdpBindHashLabel The value of sdpBindHashLabel specifies whether the use of hash label is enabled or not on this SDP Bind.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.45
sdpBindIsaAaApplicationProfile The value of sdpBindIsaAaApplicationProfile specifies the ISA-AA application profile for this sdp. The specified application profile needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.	TIMETRA-SERV-MIBServObjNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.46
sdpBindStandbySigSlave The value of sdpBindStandbySigSlave specifies whether transmission of the spoke will be blocked when the spoke receives standby status notification from its peer.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.47
sdpBindHashLabelSignalCapability The value of sdpBindHashLabelSignalCapability specifies whether to signal the hash label capability to the remote PE. The default value is 'false' and cannot be changed unless sdpBindHashLabel is set to '…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.48
sdpBindIngressFlowspecobsolete The value of sdpBindIngressFlowspec specifies whether ingress IPv4 Flowspec is enabled for this sdp.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.49
sdpBindCpmProtPolicyId The value of sdpBindCpmProtPolicyId specifies the CPM protection policy for this SDP binding. Zero specifies that no CPM protection policy is associated with this SDP binding. A non-zero value must be th…	TIMETRA-TC-MIBTCpmProtPolicyIDr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.50
sdpBindCpmProtMonitorMac The value of sdpBindCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM protection policy (as specified by sdpBindCpmProtPolicyId) must be applied. If the value of sdpBindCpmP…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.51
sdpBindCpmProtEthCfmMonitorFlags The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not to apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration) to Ethernet Connectivity Fault Management (Eth-CFM) packets served by the…	Bitsr/w Enumerated Values: 0 ethCfmMonitor 1 ethCfmMonitorAggregate 2 ethCfmMonitorCommittedAccessRate	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.52
sdpBindTransitIpPolicyId The value of sdpBindTransitIpPolicyId specifies the transit IP policy to be associated with this SDP binding. The value must either be '0' indicating an invalid transit IP policy or the specified transit IP policy needs…	TIMETRA-TC-MIBTmnxBsxTransitIpPolicyIdOrZeror/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.53
sdpBindPwStatusSignaling The value of sdpBindPwStatusSignaling specified whether this SDP binding supports pseudowire status signaling. Default value depends on the type of service: - For VPLS services it is 'true' and configurab…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.54
sdpBindOperGrp The value of the sdpBindOperGrp specifies the Operational-Group identifier associated with this SDP Bind. An 'inconsistentValue' error is returned when both sdpBindOperGrp and sdpBindMonitorOperGrp are se…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.55
sdpBindMonitorOperGrp The value of the sdpBindMonitorOperGrp specifies the Operational-Group identifier which will affect the state of this SDP Bind. An 'inconsistentValue' error is returned when both sdpBindOperGrp and sdpBin…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.56
sdpBindOperHashLabel The value of sdpBindOperHashLabel indicates the negotiated value of hash label that is used on this SDP binding. If the value of sdpBindHashLabel is set to 'true' but the value of sdpBindHashLabelSignalCa…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.57
sdpBindTransitPrefixPolicyId The value of sdpBindTransitPrefixPolicyId specifies the transit prefix policy to be associated with this SDP binding. The value must either be '0' indicating an invalid transit prefix policy or the specified transit pre…	TIMETRA-TC-MIBTmnxBsxTransPrefPolicyIdOrZeror/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.58
sdpBindAarpId The value of sdpBindAarpId specifies the AA Redundancy Protocol (AARP) instance associated with this SDP binding. If set to 0, no AARP instance is associated with this SDP binding.	TIMETRA-TC-MIBTmnxBsxAarpIdOrZeror/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.59
sdpBindIngressQoSNetworkPlcyId The value of the sdpBindIngressQoSNetworkPlcyId specifies the ingress QoS network policy applied to this SDP binding.	TIMETRA-TC-MIBTSdpIngressPolicyIDr/w	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.60
sdpBindEgressQoSNetworkPlcyId The value of the sdpBindEgressQoSNetworkPlcyId specifies the egress QoS network policy applied to this SDP binding.	TIMETRA-TC-MIBTSdpEgressPolicyIDr/w	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.61
sdpBindIngressQoSFpRedirectQGrp The value of sdpBindIngressQoSFpRedirectQGrp specifies the forwarding-plane queue group Policy for this SDP binding. This object must be set along with sdpBindIngressQoSNetworkPlcyId object.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.62
sdpBindEgressQoSPortRedirectQGrp The value of sdpBindEgressQoSPortRedirectQGrp specifies the forwarding-plane queue group Policy for this SDP binding. This object must be set along with sdpBindEgressQoSNetworkPlcyId object.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.63
sdpBindIngressQoSInstanceId The value of sdpBindIngressQoSInstanceId specifies the instance of the forwarding-plane ingress Queue Group for this SDP binding.	TIMETRA-TC-MIBTQosQGrpInstanceIDorZeror/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.64
sdpBindEgressQoSInstanceId The value of sdpBindEgressQoSInstanceId specifies the instance of the forwarding-plane egress Queue Group for this SDP binding.	TIMETRA-TC-MIBTQosQGrpInstanceIDorZeror/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.65
sdpBindAarpServRefType The value of sdpBindAarpServRefType specifies the role of the Spoke SDP referenced by the Redundancy Protocol (AARP) instance identified by sdpBindAarpId. If sdpBindAarpId is the invalid AARP instance '0', then the serv…	TIMETRA-TC-MIBTmnxBsxAarpServiceRefTyper/w Type Values: 0 none 1 dualHomed 2 shuntSubscriberSide 3 shuntNetworkSide 4 dualHomedSecondary	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.66
sdpBindPwLocalStatusBits sdpBindPwLocalStatusBits indicates the bits set locally when there is a fault. LAC failures occur on the SAP that has been configured on the PIPE service, PSN bits are set by SDP-binding failures on the PIPE service. T…	Bits Enumerated Values: 0 pwNotForwarding 1 lacIngressFault 2 lacEgresssFault 3 psnIngressFault 4 psnEgressFault 5 pwFwdingStandby	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.67
sdpBindBlockOnPeerFault The sdpBindBlockOnPeerFault specifies whether to block the user traffic on this SDP bind when peer pw status has fault bits set.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.68
sdpBindIngressIPv6Flowspecobsolete The value of sdpBindIngressIPv6Flowspec specifies whether ingress IPv6 Flowspec is enabled for this sdp.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.69
sdpBindMirrorRemoteSource The value of sdpBindMirrorRemoteSource specifies whether this SDP bind is part of remote source of the mirror service.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.70
sdpBindEtreeRootLeafTag The value of sdpBindEtreeRootLeafTag specifies whether or not this SDP binding is etree tagging in this service. An 'inconsistentValue' error is returned if the value of this object is set to 'true' when …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.72
sdpBindCpmProtMonitorIP The value of sdpBindCpmProtMonitorIP specifies whether or not to apply the tmnxCpmProtPolPerSrcRateLimit of this SDP binding's CPM Protection policy to IPv4 DHCP packets served by the SDP binding, on a per source IP add…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.73
sdpBindUseSdpBMac The value of sdpBindUseSdpBMac specifies whether this spoke-SDP is expected to be part of a redundant pseudo-wire within a PBB epipe service. Setting the value of sdpBindUseSdpBMac to 'true (1)' will caus…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.74
sdpBindEtreeLeafAc The value of sdpBindEtreeLeafAc specifies whether or not this SDP binding is an etree leaf access circuit of the service. An 'inconsistentValue' error is returned if the value of this object is set to 'tr…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.75
sdpBindBfdTemplateName The value of sdpBindBfdTemplateName specifies BFD template associated with this SDP binding.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.76
sdpBindBfdEnable The value of sdpBindBfdEnable specifies whether BFD is enabled on this SDP binding.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.77
sdpBindBfdEncap The value of sdpBindBfdEncap specifies the BFD encapsulation used on this SDP binding.	TIMETRA-TC-MIBTmnxBfdEncapr/w Type Values: 1 ipv4	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.78
sdpBindForceQinqVcForwardingobsolete The value of sdpBindForceQinqVcForwarding specifies whether or not the datapath should forcefully insert two VLAN tags when sdpBindVcType is either set to 'ether' or 'vlan'. An 'inconsistentValue' error i…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.79
sdpBindIngressVlanTranslationobsolete The value of sdpBindIngressVlanTranslation specifies the desired Ingress Vlan Translation. A value of 'vlanId' specifies that the value of sdpBindIngressVlanTranslationId is to be used to overwrite the pr…	Enumerationr/w Enumerated Values: 1 none 2 vlanId 3 copyOuter	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.80
sdpBindIngressVlanTranslationIdobsolete The value of sdpBindIngressVlanTranslationId specifies the VLAN id to be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the …	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.81
sdpBindMinReqdSdpOperMtu The value of sdpBindMinReqdSdpOperMtu indicates the minimum required SDP MTU size used with this SDP binding.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.82
sdpBindForceQinqVcFwding The value of sdpBindForceQinqVcFwding specifies whether or not the datapath should forcefully insert two VLAN tags which are copied from the qinq service-delimiting vlan values. The sdpBindVcType should b…	Enumerationr/w Enumerated Values: 0 none 1 ctagctag 2 stagctag	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.83
sdpBindMulticastSource The value of sdpBindMulticastSource specifies whether or not the multicast source is enabled on the SDP. This object can only be set at the time the row is created and is mutually exclusive with sdpBindSplitHorizonGrp.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.4.1.84

A table that contains basic SDP Binding statistics.

sdpBindBaseStatsEntry row .1.3.6.1.4.1.6527.3.1.2.4.4.5.1

Basic statistics about a specific SDP Binding.

Indexes

TIMETRA-SERV-MIBsvcId sdpBindId

Column	Syntax	OID
sdpBindBaseStatsIngressForwardedPackets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.4.5.1.1
sdpBindBaseStatsIngressDroppedPackets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.4.5.1.2
sdpBindBaseStatsEgressForwardedPackets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.4.5.1.3
sdpBindBaseStatsEgressForwardedOctets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.4.5.1.4
sdpBindBaseStatsCustId The Customer ID of the associated service.	TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.5.1.5
sdpBindBaseStatsIngFwdOctets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.4.5.1.6
sdpBindBaseStatsIngDropOctets	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6527.3.1.2.4.4.5.1.7

A table that contains TLS spoke SDP Bind information.

sdpBindTlsEntry row .1.3.6.1.4.1.6527.3.1.2.4.4.6.1

TLS specific information about an SDP Bind.

Indexes

TIMETRA-SERV-MIBsvcId sdpBindId

Column	Syntax	OID
sdpBindTlsStpAdminStatus The value of the object sdpBindTlsStpAdminStatus specifies whether this SDP Bind participates in the TLS's Spanning Tree Protocol.	TIMETRA-TC-MIBTmnxEnabledDisabledAdminStater/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.1
sdpBindTlsStpPriority The value of the object sdpBindTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SDP Bind. As only the most signif…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.2
sdpBindTlsStpPortNum The value of the object sdpBindTlsStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this SDP Bind. Values in the range 2048…	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.3
sdpBindTlsStpPathCost The value of the object sdpBindTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port.	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.4
sdpBindTlsStpRapidStart The value of the object sdpBindTlsStpRapidStart specifies whether Rapid Start is enabled on this SDP Bind. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SDP Bind are driven by the valu…	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.5
sdpBindTlsStpBpduEncap The value of the object sdpBindTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SDP Bind.	Enumerationr/w Enumerated Values: 1 dynamic 2 dot1d 3 pvst	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.6
sdpBindTlsStpPortState The value of the object sdpBindTlsStpPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bri…	TIMETRA-SERV-MIBTStpPortState Type Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken 7 discarding	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.7
sdpBindTlsStpDesignatedBridge The value of the object sdpBindTlsStpDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	TIMETRA-SERV-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.8
sdpBindTlsStpDesignatedPort The value of the object sdpBindTlsStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.9
sdpBindTlsStpForwardTransitions The value of the object sdpBindTlsStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.10
sdpBindTlsStpInConfigBpdus The value of the object sdpBindTlsStpInConfigBpdus indicates the number of Configuration BPDUs received on this SDP Bind.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.11
sdpBindTlsStpInTcnBpdus The value of the object sdpBindTlsStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this SDP Bind.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.12
sdpBindTlsStpInBadBpdus The value of the object sdpBindTlsStpInBadBpdus indicates the number of bad BPDUs received on this SDP Bind.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.13
sdpBindTlsStpOutConfigBpdus The value of the object sdpBindTlsStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this SDP Bind.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.14
sdpBindTlsStpOutTcnBpdus The value of the object sdpBindTlsStpOutTcnBpdus indicates the number of Topology Change Notification BPDUs sent out this SDP Bind.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.15
sdpBindTlsStpOperBpduEncap The value of the object sdpBindTlsStpOperBpduEncap indicates the operating encapsulation type used on BPDUs sent out and received on this SDP Bind.	Enumeration Enumerated Values: 2 dot1d 3 pvst	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.16
sdpBindTlsStpVpnId The value of the object sdpBindTlsStpVpnId indicates the VPN ID of the associated service.	TIMETRA-SERV-MIBVpnId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.17
sdpBindTlsStpCustId The value of the object sdpBindTlsStpCustId indicates the Customer ID of the associated service.	TIMETRA-TC-MIBTmnxCustId Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.18
sdpBindTlsMacAddressLimit The value of the object sdpBindTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB for this SDP Bind. The value 0 means: no limit for this SDP Bind. The command is valid o…	Integer32r/w Constraints: range: 0-511999	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.19
sdpBindTlsNumMacAddresses The value of the object sdpBindTlsNumMacAddresses indicates the number of MAC addresses currently present in the FDB that belong to this SDP Bind (Both learned and static MAC addresses are counted).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.20
sdpBindTlsNumStaticMacAddresses The value of the object sdpBindTlsNumStaticMacAddresses indicates the number of static MAC addresses currently present in the FDB that belong to this SDP Bind.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.21
sdpBindTlsMacLearning The value of the object sdpBindTlsMacLearning specifies whether the MAC learning process is enabled for this SDP Bind. The value is ignored if MAC learning is disabled on service level.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.22
sdpBindTlsMacAgeing The value of the object sdpBindTlsMacAgeing specifies whether the MAC aging process is enabled for this SDP Bind. the value is ignored if MAC aging is disabled on service level.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.23
sdpBindTlsStpOperEdge The value of the object sdpBindTlsStpOperEdge indicates the operational value of the Edge Port parameter. The object is initialized to the value of sdpBindTlsStpRapidStart and is set FALSE on reception of a BPDU.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.24
sdpBindTlsStpAdminPointToPoint The value of the object sdpBindTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sdp. A value of 'forceTrue' indicates that this port should always be treated…	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.25
sdpBindTlsStpPortRole The value of the object sdpBindTlsStpPortRole indicates the current role of the sdp as defined by the Rapid Spanning Tree Protocol.	TIMETRA-SERV-MIBStpPortRole Type Values: 0 master 1 root 2 designated 3 alternate 4 backup 5 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.26
sdpBindTlsStpAutoEdge The value of the object sdpBindTlsStpAutoEdge specifies whether this SDP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.27
sdpBindTlsStpOperProtocol The value of the object sdpBindTlsStpOperProtocol indicates whether stp, rstp or mstp is running on this spoke sdp. If the protocol is not enabled on this spoke-sdp the value notApplicable is returned.	TIMETRA-SERV-MIBStpProtocol Type Values: 0 notApplicable 1 stp 2 rstp 3 mstp	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.28
sdpBindTlsStpInRstBpdus The value of the object sdpBindTlsStpInRstBpdus indicates the number of Rapid Spanning Tree (Rst) BPDUs received on this SDP.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.29
sdpBindTlsStpOutRstBpdus The value of the object sdpBindTlsStpOutRstBpdus indicates the number of Rapid Spanning Tree (Rstp) BPDUs sent out on this SDP.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.30
sdpBindTlsLimitMacMove When sdpBindTlsLimitMacMove value is set to blockable (1) the agent will monitor the MAC relearn rate on this SDP Bind, and it will block it when the relearn rate specified by svcTlsMacMoveMaxRate is exceeded. When t…	TIMETRA-SERV-MIBTlsLimitMacMover/w Type Values: 1 blockable 2 nonBlockable	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.31
sdpBindTlsDiscardUnknownSource With the object sdpBindTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SDP Bind (only for spoke SDPs). When this limit is reached, packets with…	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.32
sdpBindTlsMvplsPruneState The value of the object sdpBindTlsMvplsPruneState indicates the mVPLS prune state of the spoke SDP. The object will be set to notApplicable if the spoke SDP is not managed by a mVPLS. If the SDP is managed the state ref…	TIMETRA-SERV-MIBMvplsPruneState Type Values: 1 notApplicable 2 notPruned 3 pruned	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.33
sdpBindTlsMvplsMgmtService The value of the object sdpBindTlsMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this spoke SDP. This object is only valid if sdpBindTlsMvplsPruneState is dif…	TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2148278381	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.34
sdpBindTlsMvplsMgmtSdpBndId The value of the object sdpBindTlsMvplsMgmtSdpBndId indicates the SDP bind id in the mVPLS instance specified in sdpBindTlsMvplsMgmtService that is controlling this SDP. This object is only valid if sdpBindTlsMvplsPrune…	TIMETRA-TC-MIBSdpBindId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.35
sdpBindTlsStpException The value of the object sdpBindTlsStpException indicates whether an STP exception condition is present on this Spoke Sdp. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link…	TIMETRA-SERV-MIBStpExceptionCondition Type Values: 1 none 2 oneWayCommuniation 3 downstreamLoopDetected	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.36
sdpBindTlsL2ptTermination The value of the object sdpBindTlsL2ptTermination specifies whether received L2 Protocol Tunnel PDUs are terminated on this port or sdp	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.37
sdpBindTlsBpduTranslation The value of the object sdpBindTlsBpduTranslation specifies whether received L2 Protocol Tunnel PDUs are translated before being sent out on this port or sap	TIMETRA-SERV-MIBTlsBpduTranslationr/w Type Values: 1 auto 2 disabled 3 pvst 4 stp 5 pvst-rw 6 auto-rw	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.38
sdpBindTlsStpRootGuard The value of the object sdpBindTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree conne…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.39
sdpBindTlsStpInMstBpdus The value of the object sdpBindTlsStpInMstBpdus indicates the number of Multiple Spanning Tree (Mst) BPDUs received on this SDP.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.40
sdpBindTlsStpOutMstBpdus The value of the object sdpBindTlsStpOutMstBpdus indicates the number of Multiple Spanning Tree (Mst) BPDUs sent out on this SDP.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.41
sdpBindTlsStpRxdDesigBridge The value of the object sdpBindTlsStpRxdDesigBridge indicates the designated Bridge Identifier in the last BPDU which was received on this SDP.	TIMETRA-SERV-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.42
sdpBindTlsMacMoveNextUpTime The value of the object sdpBindTlsMacMoveNextUpTime counts down the time in seconds until a SDP bind that has been brought down due to exceeding the TLS svcTlsMacMoveMaxRate, sdpBindOperFlags 'relearnLimitExceeded', is …	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.43
sdpBindTlsMacMoveRateExcdLeft The value of the object sdpBindTlsMacMoveRateExcdLeft counts down the number of times this SDP bind can exceed the TLS svcTlsMacMoveMaxRate and still be automatically brought up.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.44
sdpBindTlsLimitMacMoveLevel The value of the object sdpBindTlsLimitMacMoveLevel specifies the hierarchy in which spoke-SDPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spok…	TIMETRA-SERV-MIBTlsLimitMacMoveLevelr/w Type Values: 1 primary 2 secondary 3 tertiary	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.45
sdpBindTlsBpduTransOper The value of the object sdpBindTlsBpduTransOper indicates the operational BPDU encapsulation used for BPDU translated frames.	Enumeration Enumerated Values: 1 undefined 2 disabled 3 pvst 4 stp 5 pvst-rw	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.46
sdpBindTlsL2ptProtocols The value of the object sdpBindTlsL2ptProtocols specifies which L2 Protocol Tunnel PDUs are terminated on this port or sdp	TIMETRA-SERV-MIBL2ptProtocolsr/w Type Values: 0 stp 1 cdp 2 vtp 3 dtp 4 pagp 5 udld	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.47
sdpBindTlsIgnoreStandbySig The value of sdpBindTlsIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer which is normally ignored. Whe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.48
sdpBindTlsBlockOnMeshFail The value of sdpBindTlsBlockOnMeshFail specifies that the operational status of this spoke SDP will consider operational status of associated mesh SDPs in this service. If there are no mesh SDPs in the se…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.49
sdpBindTlsInTcBitBpdus The value of the object sdpBindTlsInTcBitBpdus indicates the number BPDUs received on this SDP Bind with the Topology Change bit set.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.50
sdpBindTlsOutTcBitBpdus The value of the object sdpBindTlsOutTcBitBpdus indicates the number BPDUs sent out this SDP Bind with the Topology Change bit set.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.51
sdpBindTlsRestProtSrcMac The value of the object sdpBindTlsRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.52
sdpBindTlsRestProtSrcMacAction The value of the object sdpBindTlsRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP. When the value of this object is 'disabl…	Enumerationr/w Enumerated Values: 1 disable 2 alarmOnly 3 discardFrame	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.53
sdpBindTlsAutoLearnMacProtect The value of sdpBindTlsAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the associated SDP binding.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.54
sdpBindDisableSendBvplsEvpnFlush The value of sdpBindDisableSendBvplsEvpnFlush specifies whether to send a isid based cmac flush indication when the sdp-bind goes oper-down.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.55
sdpBindTlsRestProtSrcMacOper The value of the object sdpBindTlsRestProtSrcMacOper indicates the operational state of the Restrict Protected Source MAC feature.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.56
sdpBindTlsRestProtSrcMacOperAct The value of the object sdpBindTlsRestProtSrcMacOperAct indicates the operational state of the Restrict Protected Source MAC action.	Enumeration Enumerated Values: 1 disable 2 alarmOnly 3 discardFrame	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.57
sdpBindTlsAutoLrnMacPrtExcList The value of sdpBindTlsAutoLrnMacPrtExcList specifies mac-list name which contains MAC addresses to be excluded from auto learn mac protect	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.4.4.6.1.58