TIMETRA-SATELLITE-MIB Table View

The tmnxSatelliteTable contains configuration information for
satellites.

tmnxSatelliteEntry row .1.3.6.1.4.1.6527.3.1.2.103.2.2.1

The tmnxSatelliteEntry consists of the configurable objects for a
given satellite.

Indexes

tmnxSatClass tmnxSatId

Column	Syntax	OID
tmnxSatClass The value of tmnxSatClass specifies the class of the satellite. Supported values: ethSatChassis (5) - Ethernet Satellite class tdmSatChassis (6) - Time Division Multiplexing Satellite class	TIMETRA-CHASSIS-MIBTmnxPhysChassisClass Type Values: 1 other 2 unknown 3 routerChassis 5 ethSatChassis 6 tdmSatChassis 7 esaChassis	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.1
tmnxSatId The value of tmnxSatId specifies a unique value which identifies the satellite.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.2
tmnxSatRowStatus The value of tmnxSatRowStatus specifies the row status. It allows the creation and deletion of rows in tmnxSatelliteTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.3
tmnxSatLastChanged The value of tmnxSatLastChanged indicates the time, since system startup, that the configuration of the row was created or modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.4
tmnxSatAssignedType The value of tmnxSatAssignedType specifies the administratively assigned type of the satellite.	TmnxSatelliteTyper/w	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.5
tmnxSatEquippedType The value of tmnxSatEquippedType indicates the satellite type that is equipped.	TmnxSatelliteType	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.6
tmnxSatMacAddress The value of tmnxSatMacAddress specifies the MAC address of the satellite. A value of all-zeroes indicates this object has not been configured.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.7
tmnxSatSoftwareRepository The value of tmnxSatSoftwareRepository specifies the software repository to be used by the satellite. An empty string indicates this object has not been configured.	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.8
tmnxSatDescription The value of tmnxSatDescription specifies the description of the satellite. An empty string indicates this object has not been configured.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.9
tmnxSatReboot The value of tmnxSatReboot specifies if the satellite will perform a reboot. Setting the value to 'doAction (1)' causes a soft-reboot of the entire satellite including all of its CPM and IOM cards.	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.10
tmnxSatUpgrade The value of tmnxSatUpgrade specifies if the satellite will perform an upgrade of all firmware, as well as a reboot of the entire satellite including all its CPM and IOM cards. CAUTION: This upgrade and r…	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.11
tmnxSatSyncBootEnv The value of tmnxSatSyncBootEnv specifies if the satellite will synchronize the boot environment with its software repository. Setting the value to 'doAction (1)' will synchronize the satellite with all o…	TIMETRA-TC-MIBTmnxActionTyper/w Type Values: 1 doAction 2 notApplicable	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.12
tmnxSatSyncEEnabled The value of tmnxSatSyncEEnabled specifies whether or not synchronous Ethernet is enabled on the satellite.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.13
tmnxSatPortTemplate The value of tmnxSatPortTemplate specifies the satellite port template which the satellite is using for its physical port scheme. The value must be specified along with tmnxSatAssignedType. If tmnxSatAssi…	TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.14
tmnxSatPtpTc The value of tmnxSatPtpTc specifies whether or not PTP transparent clock functionality is enabled on the satellite.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.15
tmnxSatClientDownDelay The value of tmnxSatClientDownDelay sets the delay between the last available uplink becoming unavailable and the disabling of the associated ethernet satellite client ports.	Integer32r/w Constraints: range: -1-1800	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.16
tmnxSatConsoleAccess The value of tmnxSatConsoleAccess specifies whether or not debug console access functionality is enabled on the satellite.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.17
tmnxSatConsoleAccessStatus The value of tmnxSatConsoleAccessStatus specifies whether or not debug console access is enabled and available on the satellite.	TmnxSatelliteConsoleAccessStatus Type Values: 1 disabled 2 requested 3 enabled 4 not-applicable	.1.3.6.1.4.1.6527.3.1.2.103.2.2.1.18

The satellite type table has an entry for each satellite type
supported by the system. Some example types are: 'es48-1gb-sfp',
'es24-1gb-sfp'.

tmnxSatelliteTypeEntry row .1.3.6.1.4.1.6527.3.1.2.103.3.1.1

Each row entry represents an Nokia SROS series satellite
type. Rows in this table are created by the agent at initialization
and cannot be created or destroyed by SNMP Set requests.

Indexes

tmnxSatTypeIndex

Column	Syntax	OID
tmnxSatTypeIndex The value of tmnxSatTypeIndex specifies the unique index which identifies the type of Nokia SROS series satellite.	TmnxSatelliteType	.1.3.6.1.4.1.6527.3.1.2.103.3.1.1.1
tmnxSatTypeClass The value of tmnxSatTypeClass indicates the class that the type of Nokia SROS series satellite pertains to.	TIMETRA-CHASSIS-MIBTmnxPhysChassisClass Type Values: 1 other 2 unknown 3 routerChassis 5 ethSatChassis 6 tdmSatChassis 7 esaChassis	.1.3.6.1.4.1.6527.3.1.2.103.3.1.1.2
tmnxSatTypeName The value of tmnxSatTypeName indicates the administrative name that identifies the type of Nokia SROS series satellite. This name string is used in CLI commands to specify a particular satellite type.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.103.3.1.1.3
tmnxSatTypeDescription The value of tmnxSatTypeDescription indicates the detailed description of this Nokia SROS series satellite type.	TIMETRA-TC-MIBTItemDescription Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.103.3.1.1.4

The tmnxSatellitePortMapTable consists of port mapping information for
all satellite ports.
          
Rows are created automatically by the system.

tmnxSatellitePortMapEntry row .1.3.6.1.4.1.6527.3.1.2.103.3.2.1

Each tmnxSatellitePortMapEntry represents port mapping information for
a given satellite port.

Indexes

tmnxSatClass tmnxSatId tmnxSatClientPortId tmnxSatUplinkId

Column	Syntax	OID
tmnxSatClientPortId The value of tmnxSatClientPortId specifies the port identifier of the satellite client port.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.103.3.2.1.1
tmnxSatUplinkId The value of tmnxSatUplinkId specifies the satellite uplink identifier.	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.6527.3.1.2.103.3.2.1.2
tmnxSatUplinkPortId The value of tmnxSatUplinkPortId indicates the port identifier of the satellite uplink port associated with the satellite client port.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.103.3.2.1.3
tmnxSatUplinkActive The value of tmnxSatUplinkActive indicates whether or not the satellite uplink port is active for the satellite client port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.103.3.2.1.4
tmnxSatHostPortId The value of tmnxSatHostPortId indicates the port identifier of the host port which is connected to the satellite uplink port. A value of '1e000000'H indicates that the satellite uplink port is not connec…	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.103.3.2.1.5

The tmnxSatelliteSyncIfTimingTable consists of synchronous interface
timing information for every satellite in the system.

tmnxSatelliteSyncIfTimingEntry row .1.3.6.1.4.1.6527.3.1.2.103.3.3.1

Each tmnxSatelliteSyncIfTimingEntry represents the configuration of
Synchronous Equipment Timing Source (SETS) of the satellite.

Entries are created/destroyed automatically by the system.

If th…

Indexes

tmnxSatClass tmnxSatId

Column	Syntax	OID
tmnxSatSyncIfTimingRef1SrcPort The value of tmnxSatSyncIfTimingRef1SrcPort indicates the source port of the first timing reference for the satellite. A value of '1e000000'H indicates that there is no source port for this reference.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.1
tmnxSatSyncIfTimingRef1AdmStatus The value of tmnxSatSyncIfTimingRef1AdmStatus indicates the administrative status of the first timing reference for the satellite.	TIMETRA-CHASSIS-MIBTmnxPortAdminStatus Type Values: 1 noop 2 inService 3 outOfService 4 diagnose	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.2
tmnxSatSyncIfTimingRef1InUse The value of tmnxSatSyncIfTimingRef1InUse indicates whether the first timing reference for the satellite is presently being used by the synchronous timing subsystem. If it is in use, tmnxSatSyncIfTimingFreqOffset indic…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.3
tmnxSatSyncIfTimingRef1Qualified The value of tmnxSatSyncIfTimingRef1Qualified indicates whether the first timing reference for the satellite is qualified for use by the synchronous timing subsystem. If the value of tmnxSatSyncIfTimingRef1Qualified is…	TIMETRA-CHASSIS-MIBTmnxSETSRefQualified Type Values: 1 qualified 2 not-qualified	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.4
tmnxSatSyncIfTimingRef1Alarm The value of tmnxSatSyncIfTimingRef1Alarm indicates the alarms on the first reference for the satellite. If any of the bits are set, then the first reference is disqualified by the timing subsystem and the value of tmnx…	TIMETRA-CHASSIS-MIBTmnxSETSRefAlarm Type Values: 0 los 1 oof 2 oopir	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.5
tmnxSatSyncIfTimingRef1RxQltyLvl The value of tmnxSatSyncIfTimingRef1RxQltyLvl indicates the received SSM Quality Level of the first reference for the satellite.	TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel Type Values: 0 unknown 1 prs 2 stu 3 st2 4 tnc 5 st3e 6 st3 7 smc 8 st4 9 dus 10 prc 11 ssua 12 ssub 13 sec 14 dnu 15 inv 16 pno 17 eec1 18 eec2 19 failed	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.6
tmnxSatSyncIfTimingRef1State The value of tmnxSatSyncIfTimingRef1State indicates the operational state of the timing for the first reference on the satellite.	TIMETRA-CHASSIS-MIBTmnxRefInState Type Values: 0 disabled 1 unqualified 2 standby 3 up 4 previousFailure 5 lowQuality 6 lof 7 ais 8 ghost 9 validating 10 reserved-10 11 reserved-11 12 reserved-12 13 fer 14 reserved-14 15 reserved-15 16 reserved-16 17 ptpAdminDisabled 18 ptpOperDown 19 ptpNoParentClock 20 operSpeedNotSupported 21 cpmUnsupBITS2048khz	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.7
tmnxSatSyncIfTimingRef2SrcPort The value of tmnxSatSyncIfTimingRef2SrcPort indicates the source port of the second timing reference for the satellite. A value of '1e000000'H indicates that there is no source port for this reference.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.8
tmnxSatSyncIfTimingRef2AdmStatus The value of tmnxSatSyncIfTimingRef2AdmStatus indicates the administrative status of the second timing reference for the satellite.	TIMETRA-CHASSIS-MIBTmnxPortAdminStatus Type Values: 1 noop 2 inService 3 outOfService 4 diagnose	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.9
tmnxSatSyncIfTimingRef2InUse The value of tmnxSatSyncIfTimingRef2InUse indicates whether the second timing reference for the satellite is presently being used by the synchronous timing subsystem.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.10
tmnxSatSyncIfTimingRef2Qualified The value of tmnxSatSyncIfTimingRef2Qualified indicates whether the second timing reference for the satellite is qualified for use by the synchronous timing subsystem. If the value of tmnxSatSyncIfTimingRef2Qualified i…	TIMETRA-CHASSIS-MIBTmnxSETSRefQualified Type Values: 1 qualified 2 not-qualified	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.11
tmnxSatSyncIfTimingRef2Alarm The value of tmnxSatSyncIfTimingRef2Alarm indicates the alarms on the second reference for the satellite. If any of the bits are set, then the second reference is disqualified by the timing subsystem and the value of t…	TIMETRA-CHASSIS-MIBTmnxSETSRefAlarm Type Values: 0 los 1 oof 2 oopir	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.12
tmnxSatSyncIfTimingRef2RxQltyLvl The value of tmnxSatSyncIfTimingRef2RxQltyLvl indicates the received SSM Quality Level of the second reference for the satellite.	TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel Type Values: 0 unknown 1 prs 2 stu 3 st2 4 tnc 5 st3e 6 st3 7 smc 8 st4 9 dus 10 prc 11 ssua 12 ssub 13 sec 14 dnu 15 inv 16 pno 17 eec1 18 eec2 19 failed	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.13
tmnxSatSyncIfTimingRef2State The value of tmnxSatSyncIfTimingRef2State indicates the operational state of the timing for the second reference on the satellite.	TIMETRA-CHASSIS-MIBTmnxRefInState Type Values: 0 disabled 1 unqualified 2 standby 3 up 4 previousFailure 5 lowQuality 6 lof 7 ais 8 ghost 9 validating 10 reserved-10 11 reserved-11 12 reserved-12 13 fer 14 reserved-14 15 reserved-15 16 reserved-16 17 ptpAdminDisabled 18 ptpOperDown 19 ptpNoParentClock 20 operSpeedNotSupported 21 cpmUnsupBITS2048khz	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.14
tmnxSatSyncIfTimingFreqOffset The value of tmnxSatSyncIfTimingFreqOffset indicates the frequency offset of the current selected timing reference for the satellite, in parts per million (ppm).	parts-per-millionSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.15
tmnxSatSyncIfTimingStatus The value of tmnxSatSyncIfTimingStatus indicates the present status of the Synchronous Timing Equipment Source (SETS) for the satellite.	TIMETRA-CHASSIS-MIBTmnxSETSStatus Type Values: 1 notPresent 2 masterFreerun 3 masterHoldover 4 masterLocked 5 slave 6 acquiring	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.16
tmnxSatSyncIfTimingSystemQltyLvl The value of tmnxSatSyncIfTimingSystemQltyLvl indicates the quality level of the system timing reference for the satellite. This is normally the quality level of the selected timing reference. If no timing reference h…	TIMETRA-CHASSIS-MIBTmnxSSMQualityLevel Type Values: 0 unknown 1 prs 2 stu 3 st2 4 tnc 5 st3e 6 st3 7 smc 8 st4 9 dus 10 prc 11 ssua 12 ssub 13 sec 14 dnu 15 inv 16 pno 17 eec1 18 eec2 19 failed	.1.3.6.1.4.1.6527.3.1.2.103.3.3.1.17

The tmnxSatellitePortMapConfigTable consists of port mapping
configuration information for all satellite client ports.
          
Rows are created automatically by the system.

tmnxSatellitePortMapConfigEntry row .1.3.6.1.4.1.6527.3.1.2.103.6.1

Each tmnxSatellitePortMapConfigEntry represents port mapping
information for a given satellite client port.

Indexes

tmnxSatClass tmnxSatId tmnxSatClientPortId

Column	Syntax	OID
tmnxSatPortMapConfigEntryLastChg The value of tmnxSatPortMapConfigEntryLastChg indicates the time, since system startup, that the configuration of the row was modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.103.6.1.1
tmnxSatPrimaryUplinkPortId The value of tmnxSatPrimaryUplinkPortId specifies the primary satellite uplink port for the satellite client port.	TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.103.6.1.2
tmnxSatSecondaryUplinkPortId The value of tmnxSatSecondaryUplinkPortId specifies the secondary satellite uplink port for the satellite client port.	TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.103.6.1.3

The tmnxSatellitePortTemplateTable consists of all the satellite port
templates defined in the system.
          
Rows are created and destroyed using tmnxSatPortTemplateRowStatus.

tmnxSatellitePortTemplateEntry row .1.3.6.1.4.1.6527.3.1.2.103.7.1

Each tmnxSatellitePortTemplateEntry represents a satellite port
template defined in the system.

Indexes

tmnxSatellitePortTemplateName

Column	Syntax	OID
tmnxSatellitePortTemplateName The value of tmnxSatellitePortTemplateName specifies the name of the satellite port template.	TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32	.1.3.6.1.4.1.6527.3.1.2.103.7.1.1
tmnxSatPortTemplateRowStatus The value of tmnxSatPortTemplateRowStatus specifies the status of this row. It allows entries to be created and deleted in the tmnxSatellitePortTemplateTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.103.7.1.2
tmnxSatPortTemplateEntryLastChg The value of tmnxSatPortTemplateEntryLastChg indicates the time, since system startup, that the configuration of the row was modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.103.7.1.3
tmnxSatPortTemplateSatType The value of tmnxSatPortTemplateSatType specifies the type of satellite the port template is for. The value must be specified along with tmnxSatPortTemplateRowStatus during a create.	TmnxSatelliteTyper/w	.1.3.6.1.4.1.6527.3.1.2.103.7.1.4
tmnxSatPortTemplateAdminState The value of tmnxSatPortTemplateAdminState specifies the administrative state of this satellite port template.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.103.7.1.5
tmnxSatPortTemplateDescription The value of tmnxSatPortTemplateDescription specifies the description of the satellite port template.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.103.7.1.6

The tmnxSatPortTemplatePortTable consists of all the satellite port
properties associated with satellite port templates defined in the
system.
          
Rows are created and destroyed automatically by the system when an
entry in tmnxSatellitePortTemplateTable is created and destroyed
respectively. The number of rows created depends on the number of
physical ports available on the satellite of type
tmnxSatPortTemplateSatType.

tmnxSatPortTemplatePortEntry row .1.3.6.1.4.1.6527.3.1.2.103.8.1

Each tmnxSatPortTemplatePortEntry contains properties for each
satellite port associated with satellite port templates defined in the
system.

Indexes

tmnxSatellitePortTemplateName tmnxSatPhysPortId

Column	Syntax	OID
tmnxSatPhysPortId The value of tmnxSatPhysPortId specifies the port identifier of the physical satellite port which the configuration is this row pertains to.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.103.8.1.1
tmnxSatPortTmplPortEntryLastChg The value of tmnxSatPortTmplPortEntryLastChg indicates the time, since system startup, that the configuration of the row was modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.103.8.1.2
tmnxSatPortTemplatePortRole The value of tmnxSatPortTemplatePortRole specifies the role assigned in the port template to the physical satellite port. none (0) - Once the port template is assigned to a satellite, the port is not…	Enumerationr/w Enumerated Values: 0 none 1 uplink 2 client	.1.3.6.1.4.1.6527.3.1.2.103.8.1.3
tmnxSatPortTemplatePortUplink The value of tmnxSatPortTemplatePortUplink specifies the port identifier of the physical satellite port, which the physical satellite port specified by tmnxSatPhysPortId, will use as its uplink port.	TIMETRA-TC-MIBTmnxPortIDr/w	.1.3.6.1.4.1.6527.3.1.2.103.8.1.4

The tmnxSatelliteLocalForwardTable consists of all the satellite local
forward instances defined in the system.
          
A local forward is used to redirect certain client traffic away from
the host router.
          
Rows are created and destroyed using tmnxSatLocalForwardRowStatus.

tmnxSatelliteLocalForwardEntry row .1.3.6.1.4.1.6527.3.1.2.103.9.1

Each tmnxSatelliteLocalForwardEntry represents a satellite local
forward defined in the system.

Indexes

tmnxSatLocalForwardId

Column	Syntax	OID
tmnxSatLocalForwardId The value of tmnxSatLocalForwardId specifies the identifier for the local forward.	Unsigned32 Constraints: range: 1-10240	.1.3.6.1.4.1.6527.3.1.2.103.9.1.1
tmnxSatLocalForwardRowStatus The value of tmnxSatLocalForwardRowStatus specifies the status of this row. It allows entries to be created and deleted in the tmnxSatelliteLocalForwardTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.103.9.1.2
tmnxSatLocalForwardEntryLastChg The value of tmnxSatLocalForwardEntryLastChg indicates the time, since system startup, that the configuration of the row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.103.9.1.3
tmnxSatLocalForwardAdminState The value of tmnxSatLocalForwardAdminState specifies the administrative state of the satellite local forward.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.103.9.1.4
tmnxSatLocalForwardDescription The value of tmnxSatLocalForwardDescription specifies the description of the satellite local forward.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.103.9.1.5
tmnxSatLocalForwardOperState The value of tmnxSatLocalForwardOperState indicates the operational state of the satellite local forward.	TIMETRA-TC-MIBServiceOperStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.103.9.1.6

The tmnxSatLocalForwardSapTable consists of all the Service Access
Points (SAPs) used in satellite local forward instances defined in the
system.
          
Rows are created and destroyed using tmnxSatLocalForwardSapRowStatus.

tmnxSatLocalForwardSapEntry row .1.3.6.1.4.1.6527.3.1.2.103.10.1

Each tmnxSatLocalForwardSapEntry represents a SAP used in a satellite
local forward instance defined in the system.

Indexes

tmnxSatLocalForwardId tmnxSatPortId tmnxSatEncapValue

Column	Syntax	OID
tmnxSatPortId The value of tmnxSatPortId specifies the port ID the SAP is running on.	TIMETRA-TC-MIBTmnxPortID	.1.3.6.1.4.1.6527.3.1.2.103.10.1.1
tmnxSatEncapValue The value of tmnxSatEncapValue specifies the label used to identify the SAP running on the port ID specified by tmnxSatPortId.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.6527.3.1.2.103.10.1.2
tmnxSatLocalForwardSapRowStatus The value of tmnxSatLocalForwardSapRowStatus specifies the status of this row. It allows entries to be created and deleted in the tmnxSatLocalForwardSapTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.103.10.1.3
tmnxSatLocalFwdSapEntryLastChg The value of tmnxSatLocalFwdSapEntryLastChg indicates the time, since system startup, that the configuration of the row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.103.10.1.4
tmnxSatLocalForwardSapAdminState The value of tmnxSatLocalForwardSapAdminState specifies the administrative state of the satellite local forward SAP.	TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.103.10.1.5
tmnxSatLocalFwdSapDescription The value of tmnxSatLocalFwdSapDescription specifies the description of the satellite local forward SAP.	TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80	.1.3.6.1.4.1.6527.3.1.2.103.10.1.6
tmnxSatLocalForwardSapOperState The value of tmnxSatLocalForwardSapOperState indicates the operational state of the satellite local forward SAP.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.6527.3.1.2.103.10.1.7

The tmnxSatelliteFeaturesTable consists of the enabled/disabled state,
for all satellites, of all features which require a minimum satellite
software image revision to operate on a satellite. Enabling a feature
on a satellite which is not running the minimum satellite software
image revision needed to support that feature will cause the satellite
to fail.
          
Rows are created and destroyed when a row is created or destroyed in
the tmnxSatelliteTable.

tmnxSatelliteFeaturesEntry row .1.3.6.1.4.1.6527.3.1.2.103.11.1

Each tmnxSatelliteFeaturesEntry contains the enabled/disabled state,
for a particular satellite, of all the features which require a
minimum satellite software image revision to operate on a satellite.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxSatFeaturesEntryLastChange The value of tmnxSatFeaturesEntryLastChange indicates the time, since system startup, that the configuration of the row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.103.11.1.1
tmnxSatFeatureLocalForward The value of tmnxSatFeatureLocalForward specifies whether the local forward feature is enabled or disabled on the satellite. The following are important things to note about enabling/disabling local forward on a satelli…	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.103.11.1.2
tmnxSatFeaturePtpTc The value of tmnxSatFeaturePtpTc specifies whether the host should enforce that the equipped satellite (hardware and software) supports PTP transparent clock functionality before allowing it to become operational. …	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.103.11.1.3