TIMETRA-MPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
62
Rows
62
Columns
900
.1.3.6.1.4.1.6527.3.1.2.6.1 · 1 row entry · 78 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspTable'
The vRtrMplsLspTable has an entry for each Labeled Switch Path (LSP)
configured for a virtual router in the system.
vRtrMplsLspEntry row .1.3.6.1.4.1.6527.3.1.2.6.1.1
Each row entry represents a Labeled Switch Path (LSP) configured
for a virtual router in the system. Entries can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsLspName t…
Column Syntax OID
The value of vRtrMplsLspIndex specifies the Labeled Switch
Path (LSP) index for this virtual router in the Nokia
SROS system. It is a unique value among entries with the
same value of vRtrID.
TIMETRA-TC-MIBTmnxVRtrMplsLspID
Type Constraints:
range: 0..131070
.1.3.6.1.4.1.6527.3.1.2.6.1.1.1
The row status used for creation, deletion, or control
of vRtrMplsLspTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspName must
have been assigned a valid value.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.1.1.2
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.1.1.3
Administrative name for this Labeled Switch Path. The vRtrMplsLspName
must be unique within a virtual router instance.

When the value of the object vRtrMplsLspType is 'p2mpAuto', LSPs
are auto-created dyn…
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w
Type Constraints:
range: 0..64
.1.3.6.1.4.1.6527.3.1.2.6.1.1.4
The desired administrative state for this LSP.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.1.1.5
The current operational state of this LSP.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.1.1.6
The vRtrMplsLspFromAddr specifies the source address of this LSP.

When vRtrMplsLspFromAddrType is 'ipv4', vRtrMplsLspFromAddr should
also be specified.

If vRtrMplsLspFromAddr has not been e…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.1.2.6.1.1.7
The vRtrMplsLspToAddr specifies the destination address of this LSP.

When vRtrMplsLspToAddrType is 'ipv4', vRtrMplsLspToAddr should also be
specified.

When vRtrMplsLspToAddrType is 'ipv6', …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.1.2.6.1.1.8
The value of object vRtrMplsLspType specifies whether the label value
is statically or dynamically assigned or whether the LSP will be used
exclusively for bypass protection. The value 'p2mpLsp' will be used to
indicate…
Enumerationr/w
Enumerated Values:
1unknown
2dynamic
3static
4bypassOnly
5p2mpLsp
6p2mpAuto
7mplsTp
8meshP2p
9oneHopP2p
10srTe
11meshP2pSrTe
12oneHopP2pSrTe
13pceInitP2pSrTe
15reserved15
.1.3.6.1.4.1.6527.3.1.2.6.1.1.9
The vRtrMplsLspOutSegIndx is the index value of the entry in
the mplsOutSegmentTable associated with this vRtrMplsLspEntry
when vRtrMplsLspType is 'static'. If vRtrMplsLspType is
'dynamic', the value of this object wil…
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.1.1.10
The value of vRtrMplsLspRetryTimer specifies the time in seconds the
software will wait before attempting the establish the failed LSP.
secondsUnsigned32r/w
Constraints:
range: 1-600
.1.3.6.1.4.1.6527.3.1.2.6.1.1.11
The value of vRtrMplsLspRetryLimit specifies the number of
attempts the software should make to reestablish a failed LSP
before the LSP is disabled. A value of 0 indicates that an
infinite number of retry attempts shou…
Unsigned32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.6527.3.1.2.6.1.1.12
The value of vRtrMplsLspMetric specifies the metric for this
LSP which is used to select an LSP among a set of LSPs which are
destined to the same egress 7x50 router. The LSP with the lowest
metric will be selected.
Unsigned32r/w
Constraints:
range: 0-16777215
.1.3.6.1.4.1.6527.3.1.2.6.1.1.13
When the value of vRtrMplsLspDecrementTtl is 'true', the ingress
ESR writes the TTL of the IP packet into the label and each
transit ESR decrements the TTL in the label. At the egress ESR
the TTL value from the label i…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.14
When the value of vRtrMplsLspCspf is 'true', CSPF computation
for constrained-path LSP is enabled. When the value of
vRtrMplsLspCspf is 'false' CSPF computation is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.15
When the value of vRtrMplsLspFastReroute is 'true', fast reroute
is enabled. A pre-computed detour LSP is created from each node
in the primary path of this LSP. In case of a failure of a link
or LSP between two nodes…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.16
The value of vRtrMplsLspFRHopLimit specifies the total number of hops
a detour LSP can take before merging back onto the main LSP path.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.3.1.2.6.1.1.17
The value of vRtrMplsLspFRBandwidth specified the amount of bandwidth
in megabits per second (Mbps) to be reserved for the detour LSP. A
value of zero (0) indicates that no bandwidth is reserved.
megabpsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.1.1.18
The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspClassOfService.
The EXP bits in the MPLS header are set based on the global
mapping table that specified the m…
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.1.1.19
The value of vRtrMplsLspSetupPriority specifies the setup priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup…
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.1.1.20
The value of vRtrMplsLspHoldPriority specifies the hold priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup p…
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.1.1.21
When the value of vRtrMplsLspRecord is 'true', recording of all the
hops that a LSP traverses is enabled.

When the value of vRtrMplsLspRecord is 'false, recording of all the
hops that a LSP traverses is d…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.22
The value of vRtrMplsLspPreference specifies the preference for
the LSP. This value is used for load balancing between multiple
LSPs that exist between the same ingress and egress routers.
By default, traffic is load b…
Unsigned32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.6527.3.1.2.6.1.1.23
The value of vRtrMplsLspBandwidth specifies the amount of bandwidth in
megabits per second (Mbps) to be reserved for the LSP. A value of zero
(0) indicates that no bandwidth is reserved.

When vRtrMplsLspP…
megabpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.1.1.24
When vRtrMplsLspBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guaranteed
bandwidth. It is expected that multip…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.25
The value of vRtrMplsLspHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
exceeded.

When the value …
Unsigned32r/w
Constraints:
range: 2-255
.1.3.6.1.4.1.6527.3.1.2.6.1.1.26
The value of vRtrMplsLspNegotiatedMTU specifies the size for the
Maximum transmission unit (MTU) that is negotiated during LSP
establishment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.1.1.27
The value of vRtrMplsLspRsvpResvStyle specifies the reservation style
for RSVP. The reservation style can be set to 'Shared- Explicit' (se)
or 'Fixed-Filter' (ff).
Enumerationr/w
Enumerated Values:
1se
2ff
.1.3.6.1.4.1.6527.3.1.2.6.1.1.28
When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC object
will be included in RSVP messages. When the value of
vRtrMplsLspRsvpAdspec is 'false', the ADSPEC object will not be
included in RSVP messages.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.29
The value of vRtrMplsLspFRMethod specifies the fast reroute method
used.

In the 'One-to-one Backup' method, a backup LSP is established which
will intersect the original LSP somewhere downstream of the po…
Enumerationr/w
Enumerated Values:
1oneToOneBackup
2facilityBackup
.1.3.6.1.4.1.6527.3.1.2.6.1.1.30
Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables node
protection i.e. protection against the failure of a node on the LSP.

Setting the value to 'false' disables node protection.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.31
The value of vRtrMplsLspAdminGroupInclude is a bit-map that specifies
a list of admin groups that should be included when this LSP is setup.
If bit 'n' is set, then the admin group with value 'n' is included for
this LS…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.1.1.32
The value of vRtrMplsLspAdminGroupExclude is a bit-map that specifies
a list of admin groups that should be excluded when this LSP is setup.
If bit 'n' is set, then the admin group with value 'n' is excluded for
this LS…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.1.1.33
Setting the value of vRtrMplsLspAdaptive to 'true' enables
make-before-break functionality for the LSP. When the attributes of an
already established LSP are changed, either through manual
configuration or due to a chan…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.34
For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspInheritance that controls whether to
inherit the…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.1.1.35
The value of vRtrMplsLspOptimizeTimer specifies the time, in seconds,
the software will wait before attempting to re-optimize the LSP.

When CSPF is enabled, changes in the network topology may cause the
e…
secondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6527.3.1.2.6.1.1.36
The value of vRtrMplsLspOperFastReroute indicates whether the
operational LSP has fast reroute enabled or disabled.

When make-before-break functionality for the LSP is enabled and if the
fast reroute sett…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.37
The value of vRtrMplsLspFRObject specifies whether fast reroute, for
LSPs using 'Facility Backup', is signalled with or without the fast
reroute object. The value of vRtrMplsLspFRObject is ignored if fast
reroute is dis…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.38
The value of vRtrMplsLspHoldTimer specifies the time, in seconds, for
which the ingress node holds a bit before programming its data plane
and declaring the lsp up to the service module.

The value of vRtr…
secondsUnsigned32
Constraints:
range: 0-1000
.1.3.6.1.4.1.6527.3.1.2.6.1.1.39
The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE
metric would be used for the purpose of the LSP path computation by
CSPF. When the value of this object is 'false', the IGP metric is used
to compute …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.40
The value of vRtrMplsLspP2mpId specifies a unique identifier known as
point to multipoint (P2MP) identifier (ID).
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6527.3.1.2.6.1.1.41
The value of vRtrMplsLspClassType specifies the class type (CT)
associated with this LSP.
TIMETRA-TC-MIBTmnxRsvpDSTEClassTyper/w
Type Constraints:
range: 0..7
.1.3.6.1.4.1.6527.3.1.2.6.1.1.42
The value of vRtrMplsLspOperMetric indicates the operational metric
for the LSP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.1.1.43
The value of vRtrMplsLspLdpOverRsvpInclude specifies that this LSP can
be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS)
will subsequently provide LDP with all ECMP IGP next-hops and tunnel
endpoints…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.44
The value of vRtrMplsLspLeastFill specifies whether the use of the
least-fill path selection method for the computation of the path of
this LSP is enabled.

By default, the path of an LSP is randomly chose…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.45
The value of vRtrMplsLspVprnAutoBindInclude specifies whether the LSP
can be used as part of the auto-bind feature for VPRN services. By
default a LSP is available for inclusion to be used for the auto-bind
feature.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.46
The value of vRtrMplsLspMainCTRetryLimit specifies the number of
attempts the software should make before it can start using the backup
class type.
Unsigned32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.6527.3.1.2.6.1.1.47
The value of vRtrMplsLspIgpShortcut specifies whether to exclude or
include a RSVP LSP from being used as a shortcut while resolving IGP
routes.

When the value of vRtrMplsLspIgpShortcut is set to 'true' t…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.48
When the value of the vRtrMplsLspType is 'p2mpAuto', the value of
vRtrMplsLspOriginTemplate indicates the LSP Template which was used to
create this LSP.

For all other types of LSPs, the value of vRtrMpls…
TIMETRA-TC-MIBTNamedItemOrEmpty
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.1.1.49
The value of the vRtrMplsLspAutoBandwidth specifies whether automatic
bandwidth adjustment has been enabled or disabled for this LSP.

A value of 'true' specifies that automatic bandwidth adjustment has
be…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.50
The value of the vRtrMplsLspCspfToFirstLoose specifies whether the
CSPF calculation till the first loose hop on ingress Label Edge Router
(LER) is enabled or disabled for this Labeled Switched Path(LSP).

SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.51
The value of the vRtrMplsLspPropAdminGroup specifies whether the
propagation of session attribute object with resource affinity (C-type
1) in PATH message is enabled.

By default, the value of vRtrMplsLspP…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.52
The value of vRtrMplsLspBgpShortcut specifies whether to exclude or
include a RSVP LSP from being used as a shortcut while resolving BGP
routes.

When the value of vRtrMplsLspBgpShortcut is set to 'true' t…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.53
The value of vRtrMplsLspBgpTransportTunnel specifies whether an RSVP
LSP is allowed or blocked in its usage as a transport LSP for BGP
tunnel routes.

When the value of vRtrMplsLspBgpTransportTunnel is set…
TmnxMplsLspBgpRSVPLSPTunStater/w
Type Values:
1include
2exclude
.1.3.6.1.4.1.6527.3.1.2.6.1.1.54
The value of vRtrMplsLspSwitchStbyPath specifies whether to trigger
the switch from the current active standby LSP path to a new LSP path
as specified by vRtrMplsLspSwitchStbyPathIndex.

When SET to the va…
TIMETRA-TC-MIBTmnxActionTyper/w
Type Values:
1doAction
2notApplicable
.1.3.6.1.4.1.6527.3.1.2.6.1.1.55
The value of vRtrMplsLspSwitchStbyPathIndex specifies the index for
the new standby LSP path in mplsTunnelTable.

vRtrMplsLspSwitchStbyPath must also be set to 'doAction' for the new
standby LSP path to be…
MPLS-TE-MIBMplsTunnelIndexr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.6527.3.1.2.6.1.1.56
The value of vRtrMplsLspSwitchStbyPathForce specifies whether to force
a switch from an active LSP path to a new standby path as specified by
the values of vRtrMplsLspSwitchStbyPathIndex and
vRtrMplsLspSwitchStbyPath.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.57
The value of vRtrMplsLspExcludeNodeAddrType specifies the type of
vRtrMplsLspExcludeNodeAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.1.1.58
When vRtrMplsLspExcludeNodeAddr is set to non-zero value, XRO (Exclude
Routers) object will be included in bypass path message with supplied
IP address.

SET the value to 0.0.0.0 to disable.
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.1.1.59
The value of vRtrMplsLspIgpShortcutLfaType specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving IGP routes in LFA SPF or whether to exclude or include a
RSVP LSP from being us…
Enumerationr/w
Enumerated Values:
0none
1lfaProtect
2lfaOnly
.1.3.6.1.4.1.6527.3.1.2.6.1.1.60
The vRtrMplsLspToAddrType object is an enumerated value that specifies
the destination address type of the LSP.

The value of 'ipv4' specifies an IPv4 address and vRtrMplsLspToAddr
should be configured.
TmnxMplsLspAddrTyper/w
Type Values:
0unknown
1ipv4
2nodeId
3ipv6
.1.3.6.1.4.1.6527.3.1.2.6.1.1.61
The vRtrMplsLspFromAddrType object is an enumerated value that
specifies the source address type of the LSP.

When the value of vRtrMplsLspFromAddrType is 'ipv4', it specifies an
IPv4 address type and vRtr…
TmnxMplsLspAddrTyper/w
Type Values:
0unknown
1ipv4
2nodeId
3ipv6
.1.3.6.1.4.1.6527.3.1.2.6.1.1.62
The value of vRtrMplsLspToNodeId specifies the destination node id of
an MPLS-TP Static LSP.

vRtrMplsLspToNodeId is configured when vRtrMplsLspToAddrType is set to
'nodeId'.
TIMETRA-TC-MIBTmnxMplsTpNodeIDr/w .1.3.6.1.4.1.6527.3.1.2.6.1.1.63
The value of vRtrMplsLspFromNodeId indicates the source node id of an
MPLS-TP Static LSP.
TIMETRA-TC-MIBTmnxMplsTpNodeID .1.3.6.1.4.1.6527.3.1.2.6.1.1.64
The value of vRtrMplsLspDestGlobalId specifies the destination global
identifier for an MPLS-TP Static LSP.

When the vRtrMplsLspDestGlobalId bit in vRtrMplsLspInheritance is
cleared (0), the administrativ…
TIMETRA-TC-MIBTmnxMplsTpGlobalIDr/w .1.3.6.1.4.1.6527.3.1.2.6.1.1.65
The value of vRtrMplsLspDestTunnelNum specifies the destination tunnel
number of an MPLS-TP Static LSP.

A value of 0 indicates that vRtrMplsLspIndex is to be used as the
destination tunnel number.
Unsigned32r/w
Constraints:
range: 0-61440
.1.3.6.1.4.1.6527.3.1.2.6.1.1.66
The value of vRtrMplsLspFRPropAdminGroup specifies whether or not the
use of administrative group constraints on a FRR backup LSP is
enabled.

If vRtrMplsLspFastReroute is set to 'true', the value of
vRtrM…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.67
The value of vRtrMplsLspIgpShortcutRelOffset specifies the the
relative offset to the IGP metric on the SPF tree.

The SPF tree is updated with the current IGP metric of the path
between the endpoints of t…
Integer32r/w
Constraints:
range: -10-10
range: 2147483647-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.1.1.68
The value of vRtrMplsLspRevertTimer specifies a revert timer for a
Labeled Switch Path (LSP).

When the value of vRtrMplsLspRevertTimer is set to '0', it cancels any
revert timer that is currently running …
minutesUnsigned32r/w
Constraints:
range: 0-4320
.1.3.6.1.4.1.6527.3.1.2.6.1.1.69
The value of vRtrMplsLspRevertTimeRemain indicates the time remaining
in minutes before the revert timer would expire causing an lsp revert
to primary path.
minutesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.1.1.70
The value of vRtrMplsLspLoadBalancingWeight specifies the load
balancing weight applied to this Labeled Switch Path(LSP). When a
system level load-balancing command is enabled, packets forwarded to a
set of ECMP tunnel …
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6527.3.1.2.6.1.1.71
The value of vRtrMplsLspClassFwdingEnabled specifies whether class
based forwarding over this MPLS LSP is enabled or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.72
The value of vRtrMplsLspFC specifies a set of forwarding classes
configured for this LSP expressed as a bit map. If a bit from 0
through 7 is set, then the corresponding forwarding class has been
configured for this LSP…
TIMETRA-TC-MIBTmnxCBFClassesr/w
Type Values:
0be
1l2
2af
3l1
4h2
5ef
6h1
7nc
8defaultLsp
.1.3.6.1.4.1.6527.3.1.2.6.1.1.73
The value of vRtrMplsLspBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP.
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.1.1.74
The value of vRtrMplsLspBfdEnable specifies whether BFD is enabled or
not for this LSP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.1.1.75
The value of vRtrMplsLspBfdPingIntvl specifies the time interval for
periodic LSP ping for BFD bootstrapping.

The object vRtrMplsLspBfdPingIntvl is applicable to LSPs with
vRtrMplsLspType set to 'dynamic'…
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 60-300
.1.3.6.1.4.1.6527.3.1.2.6.1.1.76
The value of vRtrMplsLspNgFromAddr specifices the source address of
this LSP.
OctetStringr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.1.1.77
The value of vRtrMplsLspNgToAddr specifices the destination address of
this LSP.
OctetStringr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.1.1.78
.1.3.6.1.4.1.6527.3.1.2.6.2 · 1 row entry · 17 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspStatTable'
The vRtrMplsLspStatTable has an entry for each Labeled Switch Path
(LSP) configured for a virtual router in the system.
vRtrMplsLspStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.2.1
Each row entry represents a collection of statistics for a Labeled
Switch Path (LSP) configured for a virtual router in the system.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
The number of octets that have been forwarded over current
LSP active path. The number reported is not realtime, may
be subject to several minutes delay. The delay is controllable
by MPLS statistics gathering interval,…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.2.1.1
The number of packets that have been forwarded over current
LSP active path. The number reported is not realtime, may
be subject to several minutes delay. The delay is controllable
by MPLS statistics gathering interval…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.2.1.2
The age (i.e., time from creation till now) of this LSP in
10-millisecond periods.
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.2.1.3
The total time in 10-millisecond units that this LSP has been
been operational. For example, the percentage up time can be
determined by computing (vRtrMplsLspTimeUp/vRtrMplsLspAge * 100 %).
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.2.1.4
The total time in 10-millisecond units that this LSP has not been
operational.
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.2.1.5
The total time in 10-millisecond units that this LSP's primary
path has been operational. For example, the percentage
contribution of the primary path to the operational time is
given by (vRtrMplsLspPrimaryTimeUp/vRtrM…
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.2.1.6
The number of state transitions (up -> down and down -> up) this LSP
has undergone.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.2.1.7
The time in 10-millisecond units since the last transition occurred on
this LSP.
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.2.1.8
The number of path changes this LSP has had. For every path change
(path down, path up, path change), a corresponding syslog/trap (if
enabled) is generated for it.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.2.1.9
The time in 10-millisecond units since the last change occurred on
this LSP.
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.2.1.10
The number of paths configured for this LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.2.1.11
The number of standby paths configured for this LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.2.1.12
The number of operational paths for this LSP. This includes the path
currently active, as well as operational standby paths.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.2.1.13
The value of vRtrMplsLspConfP2mpInstances indicates the number of p2mp
instances configured for this LSP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.2.1.14
The value of vRtrMplsLspStatsEgrIndexUnAvail indicates whether an MPLS
LSP egress statistics index is available or not for the egress
statistics.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.2.1.15
The value of vRtrMplsLspSelfPingTimeouts indicate the number of times
self-ping has timed out for paths in this LSP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.2.1.16
The value of vRtrMplsLspSelfPingOamNoRsc indicates the number of times
self-ping failed due to oam resource limitations for this LSP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.2.1.17
.1.3.6.1.4.1.6527.3.1.2.6.4 · 1 row entry · 79 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspPathTable'
The vRtrMplsLspPathTable provides an association between an
LSP and a path.  An LSP can have more than one path association,
but only one of those paths can be specified as the primary
path type.  Paths are defined in as Tunnel entries in the
mplsTunnelTable in the MPLS-TE-MIB.
vRtrMplsLspPathEntry row .1.3.6.1.4.1.6527.3.1.2.6.4.1
Each row entry represents an association between a Labeled Switch
Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in
the mplsTunnelTable. Entries in this table can be created and
deleted via SNMP SET op…
Column Syntax OID
The row status used for creation, deletion, or control
of vRtrMplsLspPathTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspPathType must
have been assigned a valid value.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.4.1.1
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.4.1.2
This variable is an enum that represents the role this path is taking
within this LSP.
Enumerationr/w
Enumerated Values:
1other
2primary
3standby
4secondary
.1.3.6.1.4.1.6527.3.1.2.6.4.1.3
The configured Class Of Service (COS) for this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the label.
If the value is 255, the value in the COS field of
the la…
Integer32r/w
Constraints:
range: 0-7
range: 255-255
.1.3.6.1.4.1.6527.3.1.2.6.4.1.4
The set of configured properties for this path expressed
as a bit map. For example, if the path is an adaptive
path, the bit corresponding to bit value 1 is set.
Bits
Enumerated Values:
0record-route
1adaptive
2cspf
3mergeable
4fast-reroute
5pce-reported
6pce-controlled
7pce-computed
.1.3.6.1.4.1.6527.3.1.2.6.4.1.5
The value of vRtrMplsLspPathBandwidth specifies the amount
of bandwidth in megabits per seconds (Mbps) to be reserved
for this LSP path. A value of zero (0) indicates that no
bandwidth is reserved.
megabpsInteger32r/w
Constraints:
range: 0-6400000
.1.3.6.1.4.1.6527.3.1.2.6.4.1.6
When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guaranteed
bandwidth. It is expected that mu…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.7
The current working state of this path within this LSP.
Enumeration
Enumerated Values:
1unknown
2active
3inactive
.1.3.6.1.4.1.6527.3.1.2.6.4.1.8
When there is no path in the LSP with vRtrMplsLspPathType
value of 'primary', 'secondary' type paths of this LSP
with the same value of vRtrMplsLspPathPreference are used
for load sharing. When a 'primary' type path ex…
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.3.1.2.6.4.1.9
When vRtrMplsLspPathCosSource is set to 'true', the value of
vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService.
When 'false', the value of vRtrMplsLspClassOfService is used.

This object wa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.10
The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspPathClassOfService.
The EXP bits in the MPLS header are set based on the global
mapping table that specified t…
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.4.1.11
The value of vRtrMplsLspPathSetupPriority specifies the setup
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the hold priority of
existing LSPs. If the …
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.4.1.12
The value of vRtrMplsLspPathHoldPriority specifies the hold
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the hold priority of
existing LSPs. If the se…
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.4.1.13
When the value of vRtrMplsLspPathRecord is 'record', recording of all
the hops that a LSP traverses is enabled.

When the value of vRtrMplsLspPathRecord is 'noRecord', recording of
all the hops that a LSP …
Enumerationr/w
Enumerated Values:
1record
2noRecord
.1.3.6.1.4.1.6527.3.1.2.6.4.1.14
The value of vRtrMplsLspPathHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
exceeded.

When the vR…
Unsigned32r/w
Constraints:
range: 2-255
.1.3.6.1.4.1.6527.3.1.2.6.4.1.15
When vRtrMplsLspPathSharing has a value of 'true', path-sharing
is enabled for the secondary path. Path-sharing is used to
control the hops of the secondary path.

When vRtrMplsLspPathSharing have a value…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.16
The desired administrative state for this LSP path.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.4.1.17
The current operational state of this LSP path.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.4.1.18
For each writable object in this row that can be configured to inherit
its value from its corresponding object in the vRtrMplsLspTable,
controls whether to inherit the operational value of that object, or
use the admini…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.19
This value identifies the label switched path that is signaled for
this entry.
MPLS-LSR-MIBMplsLSPID
Type Constraints:
range: 0..31
.1.3.6.1.4.1.6527.3.1.2.6.4.1.20
The time in 10-millisecond units to signal this path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.21
Primary index into the mplsTunnelARHopTable identifying a particular
recorded hop list. A value of 0 implies that there is no recorded hop
list associated with this LSP path.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.4.1.22
The value of vRtrMplsLspPathNegotiatedMTU specifies the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this LSP Path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.23
The value of vRtrMplsLspPathFailCode indicates the reason code for LSP
Path failure. A value of 0 indicates that no failure has occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.4.1.24
The value of vRtrMplsLspPathFailNodeAddr indicates the IP address of
the node in the LSP path at which the LSP path failed. When no failure
has occurred, this value is 0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.1.2.6.4.1.25
The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when this LSP
path is setup. If bit 'n' is set, then the admin group with value 'n'
is included fo…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.26
The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when this LSP
path is setup. If bit 'n' is set, then the admin group with value 'n'
is excluded fo…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.27
Setting the value of vRtrMplsLspPathAdaptive to 'true', enables
make-before-break functionality for the LSP path.

Setting the value to 'false', disables make-before-break functionality
for the path.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.28
The value of vRtrMplsLspPathOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize the
LSP path.

When CSPF is enabled, changes in the network topology may ca…
secondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6527.3.1.2.6.4.1.29
The value of vRtrMplsLspPathNextOptimize indicates the current value
of the optimize timer. This is the time, in seconds, remaining till
the optimize timer will expire and optimization will be started for
the LSP path.
secondsUnsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6527.3.1.2.6.4.1.30
The value of vRtrMplsLspPathOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational LSP path.

When make-before-break functionality for the…
megabpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.4.1.31
The value of vRtrMplsLspPathMBBState indicates the state of the most
recent invocation of the make-before-break functionality.

Possible states are:

none (1) - no make-before-break in…
Enumeration
Enumerated Values:
1none
2success
3inProgress
4fail
.1.3.6.1.4.1.6527.3.1.2.6.4.1.32
Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers
the resignaling of the LSP path.

If the LSP path is operationally down either due to network failure or
due to the retry attempts count …
TIMETRA-TC-MIBTmnxActionTyper/w
Type Values:
1doAction
2notApplicable
.1.3.6.1.4.1.6527.3.1.2.6.4.1.33
Primary index into the vRtrMplsTunnelCHopTable identifying a
particular computed hop list. A value of 0 implies that there is no
computed hop list associated with this LSP path.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.4.1.34
The value of vRtrMplsLspPathOperMTU indicates the size for the Maximum
transmission unit (MTU) that is currently operation for this LSP Path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.35
When the value of vRtrMplsLspPathRecordLabel is 'record', recording of
labels at each node that a LSP traverses is enabled.

When the value of vRtrMplsLspPathRecordLabel is 'noRecord', recording
of labels …
Enumerationr/w
Enumerated Values:
1record
2noRecord
.1.3.6.1.4.1.6527.3.1.2.6.4.1.36
The value of vRtrMplsLspPathSrlg specifies whether the use of SRLG
constraint in the computation of a secondary path for an LSP at the
head-end Label Edge Router (LER) is enabled.

The value vRtrMplsLspPat…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.37
The value of vRtrMplsLspPathSrlgDisjoint indicates whether the
relevant standby lsp path is SRLG disjoint from the associated primary
lsp path for an LSP at the head-end Label Edge Router (LER).

The value…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.38
The value of vRtrMplsLspPathLastResigAttempt indicates the sysUpTime
when the last attempt to resignal this LSP was made.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.4.1.39
The value of vRtrMplsLspPathMetric indicates the cost of the traffic
engineered path returned by the IGP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.40
The value of vRtrMplsLspPathLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted.
TmnxMplsMBBType
Type Values:
0none
1configChange
2timerBasedResignal
3manualResignal
4globalRevert
5delayedRetry
6gracefulShutdown
7softPreemption
8pathChange
9autoBandwidth
10pceLspUpdate
.1.3.6.1.4.1.6527.3.1.2.6.4.1.41
The value of vRtrMplsLspPathLastMBBEnd indicates the sysUpTime when
the last MBB ended.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.4.1.42
The value of vRtrMplsLspPathLastMBBMetric indicates the
cost of the traffic engineered path for the LSP path prior to MBB.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.43
The value of vRtrMplsLspPathLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break suc…
Enumeration
Enumerated Values:
1none
2success
3fail
.1.3.6.1.4.1.6527.3.1.2.6.4.1.44
The value of vRtrMplsLspPathMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress.
TmnxMplsMBBType
Type Values:
0none
1configChange
2timerBasedResignal
3manualResignal
4globalRevert
5delayedRetry
6gracefulShutdown
7softPreemption
8pathChange
9autoBandwidth
10pceLspUpdate
.1.3.6.1.4.1.6527.3.1.2.6.4.1.45
The value of vRtrMplsLspPathMBBStarted indicates the sysUpTime when
the in-progress MBB started.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.4.1.46
The value of vRtrMplsLspPathMBBNextRetry indicates the amount of time
remaining in seconds before the next attempt is made to retry the
in-progress MBB.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.47
The value of vRtrMplsLspPathMBBRetryAttempts indicates 'n' where nth
attempt for the MBB is in progress.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.48
The value of vRtrMplsLspPathMBBFailCode indicates the reason code for
in-progress MBB failure. A value of 'none' indicates that no failure
has occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.4.1.49
The value of vRtrMplsLspPathMBBFailNodeArType indicates the type of
vRtrMplsLspPathMBBFailNodeAddr. A value of 'unknown' indicates that no
failure has occurred.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.4.1.50
The value of vRtrMplsLspPathMBBFailNodeAddr indicates the IP address
of the node in the LSP path at which the in-progress MBB failed. A
value of 'unknown' for vRtrMplsLspPathMBBFailNodeArType and empty
string for vRtrMp…
OctetString
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.4.1.51
The value of vRtrMplsLspPathClassType specifies the class type (CT)
associated with this LSP path. When the vRtrMplsLspPathClassType
bit in vRtrMplsLspPathInheritance is cleared (0), the value returned to
a GET reques…
TIMETRA-TC-MIBTmnxRsvpDSTEClassTyper/w
Type Constraints:
range: 0..7
.1.3.6.1.4.1.6527.3.1.2.6.4.1.52
The value of vRtrMplsLspPathOperMetric indicates the operational
metric for the LSP path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.53
The value of vRtrMplsLspPathResignalEligible indicates that the LSP
path is eligible for resignaling on the basis of available bandwidth.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.54
The value of vRtrMplsLspPathIsFastRetry indicates which retry timer is
being referred to by vRtrMplsLspPathRetryTimeRemaining.

When the value of vRtrMplsLspPathIsFastRetry is set to 'true',
vRtrMplsLspPat…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.55
The value of vRtrMplsLspPathBackupCT specifies the backup class type
(CT) associated with the LSP. A value of -1 indicates that no backup
class type has been configured for the LSP.
Integer32r/w
Constraints:
range: -1-7
.1.3.6.1.4.1.6527.3.1.2.6.4.1.56
The value of vRtrMplsLspPathMainCTRetryRem indicates the number of
remaining attempts the software should make before it can start using
the backup class type for the LSP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.57
The value of vRtrMplsLspPathOperCT indicates operational class type
(CT) associated with the LSP. A value of -1 indicates that no
operational class type has been configured for the LSP
Integer32
Constraints:
range: -1-7
.1.3.6.1.4.1.6527.3.1.2.6.4.1.58
The value of vRtrMplsLspPathNewPathIndex specifies the index for the
new path in mplsTunnelTable.
MPLS-TE-MIBMplsTunnelIndexr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.6527.3.1.2.6.4.1.59
The value of vRtrMplsLspPathMBBMainCTRetryRem indicates the number of
remaining attempts the software should make before it can start using
the backup class type for the LSP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.60
The value of vRtrMplsLspPathSigBWMBBInProg indicates the bandwidth
used to signal the MBB currently in progress.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.61
The value of vRtrMplsLspPathSigBWLastMBB indicates the bandwidth used
to signal the last MBB that occurred.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.62
The value of vRtrMplsLspPathActiveByManual indicates whether
a secondary standby path has become the active LSP path
due to manual intervention. When vRtrMplsLspSwitchStbyPath is set
to 'doAction' a manual switch is at…
Enumeration
Enumerated Values:
0notApplicable
1noForce
2force
.1.3.6.1.4.1.6527.3.1.2.6.4.1.63
The value of vRtrMplsLspPathTimeoutIn indicates the amount of time
remaining, in seconds, for the LSP path state to time out after the
initial PATH message has been sent. If the timer expires and the LSP
path has not be…
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.64
The value of vRtrMplsLspPathMBBTimeoutIn indicates the amount of time
remaining, in seconds, for the in-progress MBB path state to time out
after the initial PATH message has been sent. If the timer expires and
the in-p…
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.65
The value of vRtrMplsLspPathBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP path.
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.4.1.66
The value of vRtrMplsLspPathBfdEnable specifies whether BFD is enabled
or not for this LSP path.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.4.1.67
The value of vRtrMplsLspPathBfdPingIntvl specifies the time interval
for periodic LSP ping for BFD bootstrapping.

The object vRtrMplsLspPathBfdPingIntvl is applicable to LSPs with
vRtrMplsLspType set to '…
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 60-300
.1.3.6.1.4.1.6527.3.1.2.6.4.1.68
The value of vRtrMplsLspPathLastUpdateTime indicates the sysUpTime
when the last update occurred
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.4.1.69
The value of vRtrMplsLspPathLastUpdateId indicates the last update ID
which was processed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.4.1.70
The value of vRtrMplsLspPathLastUpdateState indicates whether the last
update was successful or failed.

Possible states are
none (1) - no update invoked
success (2) - update successful
fail (3) - upda…
Enumeration
Enumerated Values:
1none
2success
3fail
.1.3.6.1.4.1.6527.3.1.2.6.4.1.71
The value of vRtrMplsLspPathLastUpdFailCode indicates the reason code
for in-progress update failure.

A value of 'none' indicates that no failure has occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.4.1.72
The value of vRtrMplsLspPathBfdUpWaitTimer specifies the time in
seconds the software will wait for the BFD session to come up.

The timer object is applicable for LSPs with vRtrMplsLspType set to
'srTe' o…
secondsUnsigned32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.6527.3.1.2.6.4.1.73
The value of vRtrMplsLspPathBfdUpWaitTmLeft indicates the time in
seconds remaining in the vRtrMplsLspPathBfdUpWaitTimer.
secondsUnsigned32
Constraints:
range: 1-60
.1.3.6.1.4.1.6527.3.1.2.6.4.1.74
The value of vRtrMplsLspPathBfdState indicates state of the BFD
session on the LSP path.
Enumeration
Enumerated Values:
0notApplicable
1down
2up
3awaitToUp
4failToStart
.1.3.6.1.4.1.6527.3.1.2.6.4.1.75
The value of vRtrMplsLspPathBfdStartFailRsn indicates the failure
reason when vRtrMplsLspPathBfdState is value 'failToStart'.
OctetString
Constraints:
range: 0-80
.1.3.6.1.4.1.6527.3.1.2.6.4.1.76
The value of vRtrMplsLspPathBfdOperUpWaitTmr indicates operational
value of the time in seconds the software will wait for the BFD
session to come up.

When value of vRtrMplsLspPathBfdEnable to 'true',
vRt…
secondsUnsigned32
Constraints:
range: 1-60
.1.3.6.1.4.1.6527.3.1.2.6.4.1.77
The current operational state for self-ping for this LSP path.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.4.1.78
The value of vRtrMplsLspPathLastMBBFailCode indicates the reason code
for last MBB failure before retry limit exceeded. A value of 0
indicates that no failure has occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.4.1.79
.1.3.6.1.4.1.6527.3.1.2.6.5 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspPathStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspPathStatTable'
The vRtrMplsLspPathStatTable has an entry for an association between a
Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or
tunnel) entry in the mplsTunnelTable.
vRtrMplsLspPathStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.5.1
Each row entry represents a collection of statistics for an
association between a Labeled Switch Path (LSP) in the
vRtrMplsLspTable and a path (or tunnel) entry in the mplsTunnelTable.

Entries cannot be cre…
Indexes
No indexes recorded
Column Syntax OID
The total time in 10-millisecond units that this LSP path has
been operational. For example, the percentage up time can be
determined by computing (vRtrMplsLspPathTimeUp/vRtrMplsLspAge * 100 %).
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.5.1.1
The total time in 10-millisecond units that this LSP Path has not been
operational.
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.5.1.2
The number of unsuccessful attempts which have been made to signal
this path. As soon as the path gets signalled, this is set to 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.5.1.3
The object vRtrMplsLspPathTransitionCount maintains the number of
transitions that have occurred for this LSP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.5.1.4
The value of vRtrMplsLspPathCspfQueries indicates the number of CSPF
queries that have been made for this LSP path.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.5.1.5
.1.3.6.1.4.1.6527.3.1.2.6.6 · 1 row entry · 9 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsXCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsXCTable'
This table has an entry for each mplsXCEntry
in the mplsXCTable.  It serves as an another
indirect index to the mplsXCTable.
vRtrMplsXCEntry row .1.3.6.1.4.1.6527.3.1.2.6.6.1
An entry in this table represents the indices to be used to search the
mplsXCTable.
Column Syntax OID
An index of the mplsXCTable. It represents mplsXCIndex, a field of the
mplsXCTable.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.6.1.1
An index of the mplsXCTable. It represents
mplsInSegmentIfIndex of the mplsInSegmentTable.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6527.3.1.2.6.6.1.2
An index of the mplsXCTable. It represents mplsInSegmentLabel of the
mplsInSegmentTable.
MPLS-LSR-MIBMplsLabel
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.6.1.3
An index of the mplsXCTable. It represents mplsOutSegmentIndex of the
mplsOutSegmentTable.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.6.1.4
Primary index into the mplsTunnelHopTable identifying a particular
recorded hop list (stores ERO in LSR).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.6.1.5
Primary index into the mplsTunnelARHopTable identifying a particular
recorded hop list (stores RRO in LSR).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.6.1.6
An index into the TIMETRA-RSVP-MIB::vRtrRsvpSessionTable identifying a
particular RSVP session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.6.1.7
The value of vRtrMplsXCFailCode indicates the reason code for
cross-connect failure. A value of 0 indicates that no failure
occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.6.1.8
Index to the vRtrMplsTunnelCHopTable entries that specify the hops for
the CSPF path for a detour LSP for this tunnel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.6.1.9
.1.3.6.1.4.1.6527.3.1.2.6.7 · 1 row entry · 56 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsGeneralTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsGeneralTable'
The vRtrMplsGeneralTable contains objects for general control and
management of an MPLS protocol instance within a virtual router.
vRtrMplsGeneralEntry row .1.3.6.1.4.1.6527.3.1.2.6.7.1
Each row entry represents an instance of the MPLS protocol running
within a virtual router. Entries in this table cannot be
created and deleted via SNMP SET operations. An entry in this table
is created by the agent w…
Column Syntax OID
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.7.1.1
When vRtrMplsGeneralAdminState is set to 'inService', the agent
attempts to enable the MPLS protocol instance on this router.

When vRtrMplsGeneralAdminState is set to 'outOfService', the agent
attempts to…
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.7.1.2
vRtrMplsGeneralOperState indicates the current operating state of this
MPLS protocol instance on this router.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.7.1.3
When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs,
the ingress ESR writes the TTL of the IP packet in the label and
each transit ESR decrements the TTL in the label. At the egress
ESR the TTL value from t…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.4
The value of vRtrMplsGeneralTE specifies the type of traffic
engineering used with this MPLS instance.

This object was made obsolete in release 11.0.
Enumerationr/w
Enumerated Values:
1none
2bgp
3bgpigp
.1.3.6.1.4.1.6527.3.1.2.6.7.1.5
This object is used to assign values to vRtrMplsLspIndex as
described in 'Textual Conventions for SNMPv2'. The network
manager reads the object, and then writes the value back
in the SET request that creates a new inst…
SNMPv2-TCTestAndIncr
Type Constraints:
range: 0..2147483647
Description:
Represents integer-valued information used for atomic
operations. When the management protocol is used to specify
that an object instance having this syntax is to be
modified, the new value supplied via the management …
.1.3.6.1.4.1.6527.3.1.2.6.7.1.6
The value of vRtrMplsGeneralOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize the
LSPs.

When CSPF is enabled, changes in the network topology may cause …
secondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6527.3.1.2.6.7.1.7
The value of vRtrMplsGeneralFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without the
fast reroute object. The value of vRtrMplsGeneralFRObject is ignored
if fast rerout…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.8
The value of vRtrMplsGeneralResignalTimer specifies the value for the
P2P (point-to-point) LSP resignal timer, that is the time, in minutes,
the software will wait before attempting to resignal the P2P LSPs.
minutesUnsigned32r/w
Constraints:
range: 0-0
range: 30-10080
.1.3.6.1.4.1.6527.3.1.2.6.7.1.9
The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds,
for which the ingress node holds a bit before programming its data
plane and declaring the lsp up to the service module.

A value of 0 …
secondsUnsigned32r/w
Constraints:
range: 0-1000
.1.3.6.1.4.1.6527.3.1.2.6.7.1.10
The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic
bypass tunnels are enabled.

By default, dynamic bypass tunnels are enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.11
The value of vRtrMplsGeneralNextResignal indicates the time remaining,
in minutes, for the vRtrMplsGeneralResignalTimer to expire.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.7.1.12
The value of vRtrMplsGeneralOperDownReason indicates the reason due to
which the MPLS instance is operationally down.
TmnxMplsOperDownReasonCode
Type Values:
0operUp
1adminDown
2noResources
3systemIpDown
4iomFailure
5clearDown
6ipv6TeRtrDown
7ipv6TeRtrAddrChanged
8ipv6TeRtrIdIntfDown
.1.3.6.1.4.1.6527.3.1.2.6.7.1.13
The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk
Link Group (SRLG) constraint will be used in the computation of
FRR bypass or detour to be associated with any primary LSP path
on the system. When the …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.14
The value of vRtrMplsGeneralSrlgFrrStrict specifies whether
to associate the LSP with a bypass or signal a detour if a
bypass or detour satisfies all other constraints except the SRLG
constraints. When the value of vRt…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.15
The value of vRtrMplsGeneralNewP2mpInstIndex specifies the object that is used to assign
values to vRtrMplsP2mpInstIndex as described in 'Textual Conventions for SNMPv2'. The
network manager reads the object, and then …
SNMPv2-TCTestAndIncr
Type Constraints:
range: 0..2147483647
Description:
Represents integer-valued information used for atomic
operations. When the management protocol is used to specify
that an object instance having this syntax is to be
modified, the new value supplied via the management …
.1.3.6.1.4.1.6527.3.1.2.6.7.1.16
The value of vRtrMplsGeneralLeastFillMinThd specifies in percentage
the least minimum threshold parameter used in the least-fill path
selection process. When comparing the percentage of least available
link bandwidth ac…
Unsigned32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.6527.3.1.2.6.7.1.17
The value of vRtrMplsGenLeastFillReoptiThd specifies in percentage the
least reoptimization threshold parameter used in the least-fill path
selection process.

During a timer-based resignaling of an LSP pa…
Unsigned32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.6527.3.1.2.6.7.1.18
The value of vRtrMplsGeneralUseSrlgDB specifies whether the use of the
user SRLG database by CSPF is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.19
The value of vRtrMplsGeneralP2mpResigTimer specifies the value for the
P2MP (point to multi point) LSP resignal timer, that is the time, in
minutes, the software will wait before attempting to resignal the P2MP
LSPs.
minutesUnsigned32r/w
Constraints:
range: 0-0
range: 60-10080
.1.3.6.1.4.1.6527.3.1.2.6.7.1.20
The value of vRtrMplsGeneralP2mpNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralP2mpResigTimer to
expire.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.7.1.21
The value of vRtrMplsGeneralSecFastRetryTimer specifies the value, in
seconds, used as fast retry timer for a secondary path. If the first
attempt to setup a secondary path fails due to a path error, the fast
retry time…
secondsUnsigned32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.6527.3.1.2.6.7.1.22
The value of vRtrMplsGeneralShortTTLPropLocal specifies whether or not
to enable the propagation of time to live (TTL) from the IP packet
header into the header of the resulting MPLS packet for all local
packets forward…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.23
The value of vRtrMplsGeneralShortTTLPropTrans specifies whether or not
to enable the propagation of time to live (TTL) from the IP packet
header into the header of the resulting MPLS packet for all transit
packets forwa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.24
The value of vRtrMplsGeneralStaticLspFRTimer specifies the audit time
for static LSPs which are not currently up.
secondsUnsigned32r/w
Constraints:
range: 1-30
.1.3.6.1.4.1.6527.3.1.2.6.7.1.25
The value of vRtrMplsGeneralAutoBWDefSampMul specifies the global
default for collection intervals in a sample interval.
Unsigned32r/w
Constraints:
range: 1-511
.1.3.6.1.4.1.6527.3.1.2.6.7.1.26
The value of vRtrMplsGeneralAutoBWDefAdjMul specifies the global
default for collection intervals in an adjust interval.
Unsigned32r/w
Constraints:
range: 1-16383
.1.3.6.1.4.1.6527.3.1.2.6.7.1.27
The value of vRtrMplsGeneralExpBackoffRetry specifies the state of
Exponential Backoff Retry mechanism.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.28
The value of vRtrMplsGeneralCspfOnLooseHop specifies whether the
Constrained Shortest Path First (CSPF) calculation till the next loose
hop is enabled or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.29
The value of vRtrMplsGeneralP2PMaxByPassAssoc specifies the maximum
number of LSP primary paths that can associate with each manual or
dynamic bypass point-to-point (P2P) LSP.
Unsigned32r/w
Constraints:
range: 100-131072
.1.3.6.1.4.1.6527.3.1.2.6.7.1.30
The value of vRtrMplsGenP2pActPathFastRetry specifies the time, in
seconds, active path point-to-point (P2P) LSP waits before it attempts
to re-establish itself. This timer is started after first attempt to
setup active…
secondsUnsigned32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.6527.3.1.2.6.7.1.31
The value of vRtrMplsGenP2mpS2lFastRetry specifies the time, in
seconds, active path point to multipoint (P2MP) source to leaf (S2L)
LSP waits before it attempts to re-establish itself. This timer is
started after first…
secondsUnsigned32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.6527.3.1.2.6.7.1.32
The value of vRtrMplsGenLspInitRetryTimeout specifies the amount of
time in seconds the software waits for an LSP path to come up after
sending out the initial Path message. If the initial retry timeout
period expires a…
secondsUnsigned32r/w
Constraints:
range: 10-600
.1.3.6.1.4.1.6527.3.1.2.6.7.1.33
The value of vRtrMplsLoggerEventBundling specifies whether or not the
notification bundling mechanism is enabled.

When the value of vRtrMplsLoggerEventBundling is set to 'true', all
TIMETRA-SYSTEM-MIB::tm…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.34
The value of vRtrMplsGenIssuMplsLockdown indicates if MPLS has entered
the state of not accepting new requests for creation of LSPs
(local/transit) during the minor ISSU(In Service Software Update)
operation.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.39
The value of vRtrMplsGenFRAdminGroup specifies whether or not the use
of administrative group constraints on a FRR backup LSP at a
Point-of-Local Repair(PLR) node is enabled.

When the value of vRtrMplsGen…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.40
The value of vRtrMplsGenRetryOnIgpOverload specifies whether or not to
teardown LSPs transiting through nodes that are in IGP overload state.

When the value of vRtrMplsGenRetryOnIgpOverload is set to 'tru…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.41
The value of vRtrMplsGenMbbPrefCurrentHops specifies whether or not
Constrained Shortest Path First (CSPF) for a Make-before-break (MBB)
path should give preference to hops/links used by the current Labeled
Switch Path …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.42
The value of vRtrMplsGeneralBypassResigTimer specifies the value for
the Bypass LSP resignal timer, that is the time, in minutes, the
software will wait before attempting to resignal Bypass LSPs.

When the…
minutesUnsigned32r/w
Constraints:
range: 0-10080
.1.3.6.1.4.1.6527.3.1.2.6.7.1.43
The value of vRtrMplsGenBypassNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralBypassResigTimer to
expire.
minutesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.7.1.44
The value of vRtrMplsGeneralNewLspSRIndex is used to specify values
assigned to vRtrMplsLspIndex for Segment Routing LSPs.

The network manager reads the object, and then writes the value back
in the SET r…
SNMPv2-TCTestAndIncr
Type Constraints:
range: 0..2147483647
Description:
Represents integer-valued information used for atomic
operations. When the management protocol is used to specify
that an object instance having this syntax is to be
modified, the new value supplied via the management …
.1.3.6.1.4.1.6527.3.1.2.6.7.1.45
The set of configured TE properties for this LSP expressed as a bit
map.
Bitsr/w
Enumerated Values:
0srTe
1rsvpTe
.1.3.6.1.4.1.6527.3.1.2.6.7.1.46
The value of vRtrMplsGeneralEntropyLblRsvpTe specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for RSVP-TE LSPs.

When the valu…
Enumerationr/w
Enumerated Values:
1forceDisable
2enable
.1.3.6.1.4.1.6527.3.1.2.6.7.1.47
The value of vRtrMplsGeneralEntropyLblSrTe specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for SR-TE LSPs.

When the value of…
Enumerationr/w
Enumerated Values:
1forceDisable
2enable
.1.3.6.1.4.1.6527.3.1.2.6.7.1.48
The value of vRtrMplsGeneralAuxStats specifies which types of labeled
traffic are counted in the MPLS auxiliary statistics table.

By default, all labeled traffic is counted in the default MPLS
statistics…
Bitsr/w
Enumerated Values:
0sr
.1.3.6.1.4.1.6527.3.1.2.6.7.1.49
The value of vRtrMplsGenSrTeResignalTimer specifies the value for the
SR-TE LSPs resignal timer, that is the time, in minutes, the software
will wait before attempting to resignal the SR-TE LSPs.

When the…
minutesUnsigned32r/w
Constraints:
range: 0-0
range: 30-10080
.1.3.6.1.4.1.6527.3.1.2.6.7.1.50
The value of vRtrMplsGenMaxBypassPlrAssoc specifies the maxiumum
bypass PLR assocations.
Unsigned32r/w
Constraints:
range: 1-16
.1.3.6.1.4.1.6527.3.1.2.6.7.1.51
The value of vRtrMplsGenLspSelfPingInterval specifies the interval
duration at which LSP self ping packets are sent until a reply is
received from the far end of the session ID.
secondsInteger32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.6527.3.1.2.6.7.1.52
The value of vRtrMplsGenLspSelfPingTimeout specifies the value of
timeout expiry duration up to which the lsp-self-ping packets will be
sent. If the timeout expires before an LSP self ping has been
received, then the sy…
secondsInteger32r/w
Constraints:
range: 3-3600
.1.3.6.1.4.1.6527.3.1.2.6.7.1.53
The value of vRtrMplsGenLspSelfPingRsvpTe specifies whether the
application takes into account the value of Self Ping in the label
stack of RSVP-TE LSPs.

When the value of vRtrMplsGenLspSelfPingRsvpTe is …
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6527.3.1.2.6.7.1.54
The value of vRtrMplsGenSrTeResigOnIgpEvent specifies re-optimization
of SR-TE LSPs triggered by IGP events is enabled or disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.55
vRtrMplsGeneralV6OperState indicates the current operating state of
MPLS protocol instance on this router for srte ipv6.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.7.1.56
The value of vRtrMplsGeneralV6OperDownReason indicates the reason due
to which the MPLS instance is operationally down for srte ipv6.
TmnxMplsOperDownReasonCode
Type Values:
0operUp
1adminDown
2noResources
3systemIpDown
4iomFailure
5clearDown
6ipv6TeRtrDown
7ipv6TeRtrAddrChanged
8ipv6TeRtrIdIntfDown
.1.3.6.1.4.1.6527.3.1.2.6.7.1.57
The value of vRtrMplsGenSrteNextResignal indicates the time remaining,
in minutes, for the vRtrMplsGenSrTeResignalTimer to expire.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.7.1.58
The value of vRtrMplsLspSelfPingTimeoutAction specifies the timeout
action of Self Ping for RSVP-TE LSPs.

When the value of vRtrMplsLspSelfPingTimeoutAction is set to retry,
the application tears down th…
Enumerationr/w
Enumerated Values:
1retry
2switch
.1.3.6.1.4.1.6527.3.1.2.6.7.1.59
The value of vRtrMplsGenResignalOnIgpOverload specifies whether or not
RSVP-TE LSPs will be resignaled when IGP overload bit is received.

When the value of vRtrMplsGenResignalOnIgpOverload is set to 'true…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.7.1.60
.1.3.6.1.4.1.6527.3.1.2.6.8 · 1 row entry · 28 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsGeneralStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsGeneralStatTable'
The vRtrMplsGeneralStatTable contains statistics for an MPLS protocol
instance within a virtual router.
vRtrMplsGeneralStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.8.1
Each row entry represents a collection of statistics for an instance
of the MPLS protocol running within a virtual router.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsGeneralStaticLspOriginate indicates the number of
static LSPs that originate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.1
The value of vRtrMplsGeneralStaticLspTransit indicates the number of
static LSPs that transit through this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.2
The value of vRtrMplsGeneralStaticLspTerminate indicates the number of
static LSPs that terminate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.3
The value of vRtrMplsGeneralDynamicLspOriginate indicates the number
of dynamic LSPs that originate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.4
The value of vRtrMplsGeneralDynamicLspTransit indicates the number of dynamic LSPs
that transit through this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.5
The value of vRtrMplsGeneralDynamicLspTerminate indicates the number
of dynamic LSPs that terminate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.6
The value of vRtrMplsGeneralDetourLspOriginate indicates the number of
detour LSPs that originate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.7
The value of vRtrMplsGeneralDetourLspTransit indicates the number of
detour LSPs that transit through this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.8
The value of vRtrMplsGeneralDetourLspTerminate indicates the number of
detour LSPs that terminate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.9
The value of vRtrMplsGeneralS2lOriginate indicates the number of
source to leaf (S2L) sub LSP path called as S2L here that originate at
this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.10
The value of vRtrMplsGeneralS2lTransit indicates the number of S2Ls
that transit through this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.11
The value of vRtrMplsGeneralS2lTerminate indicates the number of S2Ls
that terminate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.12
The value of vRtrMplsGeneralLspEgrStatCount indicates the number of
LSP egress statistics configured on this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.13
The value of vRtrMplsGeneralLspIgrStatCount indicates the number of
LSP ingress statistics configured on this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.14
The value of vRtrMplsGenMplsTpLspOriginate indicates the number of
MPLS TP LSPs that originate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.15
The value of vRtrMplsGenMplsTpLspTransit indicates the number of MPLS
TP LSPs that transit through this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.16
The value of vRtrMplsGenMplsTpLspTerminate indicates the number of
MPLS TP LSPs that terminate at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.17
The value of vRtrMplsGenMplsTpOrigPathInst indicates the number of
MPLS TP LSPs originate path instances.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.18
The value of vRtrMplsGenMplsTpTranPathInst indicates the number of
MPLS TP LSPs transit path instances.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.19
The value of vRtrMplsGenMplsTpTermPathInst indicates the number of
MPLS TP LSPs terminated path instances.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.20
The value of vRtrMplsGeneralMeshP2pOriginate indicates the number of
Mesh P2P LSPs originating at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.21
The value of vRtrMplsGeneralOneHopP2pOrigin indicates the number of
One Hop P2P LSPs originating at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.22
The value of vRtrMplsGeneralSrTeLspOriginate indicates the number of
Segment Routing TE LSPs that are originating at this virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.23
The value of vRtrMplsGenMeshP2PSrTeLspOrig indicates the number of
Mesh P2P Segment Routing TE LSPs that are originating at this virtual
router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.24
The value of vRtrMplsGenOneHopP2PSrTeLspOrig indicates the number of
One-Hop P2P Segment Routing TE LSPs that are originating at this
virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.25
The value of vRtrMplsGenPceInitP2PSrTeLspOrig indicates the number of
PCE Init P2P Segment Routing TE LSPs that are originating at this
virtual router.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.26
The value of vRtrMplsGenLspSelfPingTimeouts indicate the number of LSP
self-ping timeouts for LSPs originating at this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.27
The value of vRtrMplsGenLspSelfPingOamNoRsc indicates the number of
failed LSP self-ping due to oam resource limitations.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.8.1.28
.1.3.6.1.4.1.6527.3.1.2.6.9 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsIfTable'
The vRtrMplsIfTable has an entry for each router interface configured
for MPLS in the system.
vRtrMplsIfEntry row .1.3.6.1.4.1.6527.3.1.2.6.9.1
Each row entry represents an interface on this virtual router
that participates in the MPLS protocol. A row cannot be created
or deleted via SNMP SET requests. A row with default attribute
values is created by setting…
Column Syntax OID
The desired administrative state for the MPLS protocol running on this
MPLS interface.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.9.1.1
This variable indicates the current status of the MPLS protocol
running on this MPLS interface. When the
TIMETRA-VRTR-MIB::vRtrIfPortID object of this interface is set to a
loopback port identifier, the operational stat…
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.9.1.2
The value of vRtrMplsIfAdminGroup is a bit-map that identifies the
admin groups to which the interface belongs. If bit 'n' is set, then
the interface belongs to the admin group with value 'n'.

By default,…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.9.1.3
The value of vRtrMplsIfTeMetric specifies the traffic engineering
metric for this interface. The TE metric is exchanged in addition to
the IGP metric by the IGPs. Depending on the value configured for
vRtrMplsLspCspfTeM…
Unsigned32r/w
Constraints:
range: 0-16777215
.1.3.6.1.4.1.6527.3.1.2.6.9.1.4
This variable indicates the current status of the MPLS protocol
running on this MPLS interface for srte ipv6. When the
TIMETRA-VRTR-MIB::vRtrIfPortID object of this interface is set to a
loopback port identifier, the op…
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.9.1.5
.1.3.6.1.4.1.6527.3.1.2.6.10 · 1 row entry · 8 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsIfStatTable'
The vRtrMplsIfStatTable has an entry for each router interface
configured for MPLS in the system.
vRtrMplsIfStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.10.1
Each row entry represents a collection of statistics for an interface
on this virtual router that participates in the MPLS protocol.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
The total number of MPLS labeled packets transmitted from this
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.10.1.1
The total number of MPLS labeled packets received on this interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.10.1.2
The total number of bytes in MPLS labeled packets transmitted on this
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.10.1.3
The total number of bytes in MPLS labeled packets received on this
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.10.1.4
The total number of SR-MPLS labeled packets transmitted from this
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.10.1.5
The total number of SR-MPLS labeled packets received on this
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.10.1.6
The total number of bytes in SR-MPLS labeled packets transmitted on
this interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.10.1.7
The total number of bytes in SR-MPLS labeled packets received on this
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.10.1.8
.1.3.6.1.4.1.6527.3.1.2.6.11 · 1 row entry · 7 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsTunnelARHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsTunnelARHopTable'
The vRtrMplsTunnelARHopTable augments the mplsTunnelARHopEntry in the
MPLS-TE-MIB.
vRtrMplsTunnelARHopEntry row .1.3.6.1.4.1.6527.3.1.2.6.11.1
A row entry in this table corresponds to a row entry in the
mplsTunnelARHopTable and adds to the information contained in that
table
Indexes
No indexes recorded
Column Syntax OID
If the 'localAvailable' bit is set, it indicates that the link
downstream of this node has been protected by means of a local repair
mechanism. This mechanism can be either the one-to-one backup method
or the facility b…
Bits
Enumerated Values:
0localAvailable
1localInUse
2bandwidthProtected
3nodeProtected
4preemptionPending
5nodeId
.1.3.6.1.4.1.6527.3.1.2.6.11.1.1
If label recording is enabled, vRtrMplsTunnelARHopRecordLabel
specifies the label that is advertised to the previous hop in the hop
list. If label recording is disabled, vRtrMplsTunnelARHopRecordLabel
will have a value …
MPLS-LSR-MIBMplsLabel
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.11.1.2
vRtrMplsTunnelARHopRouterId indicates the router ID of the node
corresponding to this hop.

vRtrMplsTunnelARHopRouterId is obsoleted in 20.0, replaced by
vRtrMplsTunnelARHopNgRouterId
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.1.2.6.11.1.3
The value of vRtrMplsTunnelARHopUnnumIfID indicates the unnumbered
interface identifier of this hop.

This object should be used in conjunction with
vRtrMplsTunnelARHopNgRouterId which would contain the LS…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.11.1.4
The value of vRtrMplsTunnelARHopSIDType indicates the type of SID for
this hop.

When the value of vRtrMplsTunnelARHopSIDType is 'notApplicable', it
indicates that this hop is not associated with an SR-TE …
Enumeration
Enumerated Values:
1notApplicable
2nodeSid
3adjacencySid
.1.3.6.1.4.1.6527.3.1.2.6.11.1.5
The value of vRtrMplsTunnelARHopNgRouterId indicates the Router ID of
the node corresponding to this hop. Currently IPV6 Router ID is
supported by this object.

The IP address type of vRtrMplsTunnelARHopNg…
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.11.1.6
The value of vRtrMplsTunnelARHopNgRtrIdType indicates the type of
address for this router-id.

When the value of vRtrMplsTunnelARHopNgRtrIdType is 'ipv4', it
indicates that vRtrMplsTunnelARHopNgRouterId of…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.11.1.7
.1.3.6.1.4.1.6527.3.1.2.6.12 · 1 row entry · 14 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsTunnelCHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsTunnelCHopTable'
The vRtrMplsTunnelCHopTable is used to hold the CSPF path for a detour
LSP. Each entry indicates a single hop.
          
Primary index is the vRtrMplsTunnelCHopListIndex which associates
multiple entries (hops) in the vRtrMplsTunnelCHopTable to a single
mplsTunnelEntry specified in the mplsTunnelTable.
          
The first row in the table is the first hop after the origination
point of the tunnel.
vRtrMplsTunnelCHopEntry row .1.3.6.1.4.1.6527.3.1.2.6.12.1
An entry in this table represents a CSPF tunnel hop. Entries are
created and deleted by the system.
Column Syntax OID
Primary index into this table identifying a particular explicit route
object.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.12.1.1
Secondary index into this table identifying a particular hop.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.12.1.2
The value of vRtrMplsTunnelCHopAddrType specifies the address type of
this tunnel hop.

When the value of vRtrMplsTunnelCHopAddrType is 'ipv4', it specifies
an IPv4 address type and vRtrMplsTunnelCHopIpv4A…
Enumeration
Enumerated Values:
0unknown
1ipV4
2ipV6
3asNumber
4lspid
5unnum
.1.3.6.1.4.1.6527.3.1.2.6.12.1.3
If vRtrMplsTunnelCHopAddrType is set to ipV4(1), then this value will
contain the IPv4 address of this hop. This object is otherwise
insignificant and should contain a value of 0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.1.2.6.12.1.4
If vRtrMplsTunnelCHopAddrType is ipV4(1), then the prefix length for
this hop's IPv4 address is contained herein. This object is otherwise
insignificant and should contain a value of 0.
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.6527.3.1.2.6.12.1.5
If the vRtrMplsTunnelCHopAddrType is set to ipV6(2), then this
variable contains the IPv6 address of this hop. This object is
otherwise insignificant and should contain a value of 0.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
.1.3.6.1.4.1.6527.3.1.2.6.12.1.6
If vRtrMplsTunnelCHopAddrType is set to ipV6(2), this value will
contain the prefix length for this hop's IPv6 address. This object is
otherwise insignificant and should contain a value of 0.
Integer32
Constraints:
range: 1-128
.1.3.6.1.4.1.6527.3.1.2.6.12.1.7
If vRtrMplsTunnelCHopAddrType is set to asNumber(3), then this value
will contain the AS number of this hop. This object is otherwise
insignificant and should contain a value of 0 to indicate this fact.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6527.3.1.2.6.12.1.8
If vRtrMplsTunnelCHopAddrType is set to lspid(4), then this value will
contain the LSPID of a tunnel of this hop. The present tunnel being
configured is tunneled through this hop (using label stacking). This
object is o…
MPLS-LSR-MIBMplsLSPID
Type Constraints:
range: 0..31
.1.3.6.1.4.1.6527.3.1.2.6.12.1.9
Denotes whether this tunnel hop is routed in a strict or loose
fashion.
Enumeration
Enumerated Values:
1strict
2loose
.1.3.6.1.4.1.6527.3.1.2.6.12.1.10
The value of vRtrMplsTunnelCHopEgressAdmGrp indicates administrative
groups on the egressing interface at the current hop.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.12.1.11
The value of vRtrMplsTunnelCHopUnnumIfID indicates the unnumbered
interface identifier of this hop.

This object should be used in conjunction with vRtrMplsTunnelCHopRtrID
which would contain the LSR Route…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.12.1.12
The value of vRtrMplsTunnelCHopRtrID indicates value of the Router ID
for the node when vRtrMplsTunnelCHopAddrType is set to ipV4(1) or
unnum(5).
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.1.2.6.12.1.13
The value of vRtrMplsTunnelCHopIsABR indicates whether the current hop
is an Area Border Router (ABR) or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.12.1.14

vRtrMplsAdminGroupTable

table obsolete
.1.3.6.1.4.1.6527.3.1.2.6.13 · 1 row entry · 3 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsAdminGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsAdminGroupTable'
The vRtrMplsAdminGroupTable has an entry for each administrative group
configured for the virtual router in the system.
          
Administrative groups are resource constructs that define a link color
or resource class. They provide the ability to classify network
resources (links) into groups or colors based on zones, geographic
location, link location, etc. By doing so, network administrators are
able to do more granular traffic engineering of LSPs.
vRtrMplsAdminGroupEntry row .1.3.6.1.4.1.6527.3.1.2.6.13.1
Each row entry in the vRtrMplsAdminGroupTable represents an
administrative group which is simply a mapping between a group name
(an ASCII string) and a group value (a number in the range 0 to 31).

Entries i…
Column Syntax OID
The value of vRtrMplsAdminGroupName uniquely identifies the name of
the administrative group within a virtual router instance.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.13.1.1
vRtrMplsAdminGroupRowStatus is used to create, delete or control
entries in the vRtrMplsAdminGroupTable. To create a row entry, the row
status should be set to 'createAndWait'. Before the row can be placed
into the 'act…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.13.1.2
The value of vRtrMplsAdminGroupValue specifies the group value
associated with this administrative group. This value is unique within
a virtual router instance.

A value of -1 indicates that the group valu…
Integer32r/w
Constraints:
range: -1-31
.1.3.6.1.4.1.6527.3.1.2.6.13.1.3

vRtrMplsFSGroupTable

table obsolete
.1.3.6.1.4.1.6527.3.1.2.6.14 · 1 row entry · 3 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsFSGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsFSGroupTable'
The vRtrMplsFSGroupTable has an entry for each group that is a part of
the fate sharing database configured for the virtual router in the
system.
          
A fate sharing group is used to define a group of links and nodes in
the network that share common risk attributes. To minimize a single
point of failure, backup paths can be created that not only avoid the
nodes and links of the primary path but also any other nodes and links
that share risk with the nodes and links of the primary path.
vRtrMplsFSGroupEntry row .1.3.6.1.4.1.6527.3.1.2.6.14.1
Each row entry in the vRtrMplsFSGroupTable represents a fate sharing
group which is a database of nodes and links that share common risk
attributes.

Entries in this table are created and deleted via SNMP SE…
Column Syntax OID
The value of vRtrMplsFSGroupName uniquely identifies the name of the
fate sharing group within a virtual router instance.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.14.1.1
vRtrMplsFSGroupRowStatus is used to create, delete or control entries
in the vRtrMplsFSGroupTable. To create a row entry, the row status
should be set to 'createAndGo'. To delete a row entry, the row status
should be se…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.14.1.2
The value of vRtrMplsFSGroupCost specifies the cost assigned to the
fate sharing group. This cost is applied to all nodes and links that
are part of this group and used for CSPF calculations. The higher the
cost of the …
Unsigned32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.6527.3.1.2.6.14.1.3
.1.3.6.1.4.1.6527.3.1.2.6.15 · 1 row entry · 3 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsFSGroupParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsFSGroupParamsTable'
The vRtrMplsFSGroupParamsTable has an entry for each node or link that
is part of a fate sharing group on this virtual router.
vRtrMplsFSGroupParamsEntry row .1.3.6.1.4.1.6527.3.1.2.6.15.1
Each row entry in the vRtrMplsFSGroupParamsTable represents either a
node or a link that is a part of a fate sharing group defined in the
vRtrMplsFSGroupTable.

Entries in this table are created and deleted …
Column Syntax OID
The value of vRtrMplsFSGroupParamsFromAddr along with the value of
vRtrMplsFSGroupParamsToAddr uniquely identifies a link or node within
a fate sharing group.

This value must be non-zero for all row entri…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.1.2.6.15.1.1
The value of vRtrMplsFSGroupParamsToAddr along with the value of
vRtrMplsFSGroupParamsFromAddr uniquely identifies a link or node
within a fate sharing group.

This value must be 0 for row entries that rep…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6527.3.1.2.6.15.1.2
vRtrMplsFSGroupParamsRowStatus is used to create, delete or control
entries in the vRtrMplsFSGroupParamsTable. To create a row entry, the
row status should be set to 'createAndGo'. To delete a row entry, the
row status …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.15.1.3
.1.3.6.1.4.1.6527.3.1.2.6.17 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLabelRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLabelRangeTable'
The vRtrMplsLabelRangeTable has an entry for each type of label, the
minimum and maximum value in the label range and information on total
available and aging labels in each range.
          
This is a read-only table.
vRtrMplsLabelRangeEntry row .1.3.6.1.4.1.6527.3.1.2.6.17.1
Each row entry in the vRtrMplsLabelRangeTable represents a type of
label. Each entry contains the label range used by that label type and
the number of aging and allocated labels in the range.
Column Syntax OID
The value of vRtrMplsLabelType specifies the type of label and is the
index for this table.
Enumeration
Enumerated Values:
1staticLsp
2staticSvc
3dynamic
4segmentRoute
5static
.1.3.6.1.4.1.6527.3.1.2.6.17.1.1
The value of vRtrMplsLabelRangeMin indicates the minimum label value
in the range for a particular label type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.17.1.2
The value of vRtrMplsLabelRangeMax indicates the maximum label value
in the range for a particular label type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.17.1.3
The value of vRtrMplsLabelRangeAging represents the number of labels
that are currently allocated and aging.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.17.1.4
The value of vRtrMplsLabelRangeAvailable represents the number of
labels that are currently available for each label type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.17.1.5
.1.3.6.1.4.1.6527.3.1.2.6.18 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsStaticLSPLabelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsStaticLSPLabelTable'
The vRtrMplsStaticLSPLabelTable has an entry for each allocated label
that is part of the static LSP label range. This is a read-only table.
vRtrMplsStaticLSPLabelEntry row .1.3.6.1.4.1.6527.3.1.2.6.18.1
Each row entry in the vRtrMplsStaticLSPLabelTable represents a label
of type static LSP that is currently allocated. The entry includes
information about the current owner for that label.
Column Syntax OID
The value of vRtrMplsStaticLSPLabel specifies the label value for a
static LSP.

The range of vRtrMplsStaticLSPLabel is dynamic and depends on the
value of vRtrMplsLabelStaticLabelRange.

The…
Unsigned32
Constraints:
range: 32-262112
.1.3.6.1.4.1.6527.3.1.2.6.18.1.1
The value of vRtrMplsStaticLSPLabelOwner indicates the owner for the
label value vRtrMplsStaticLSPLabel.
TmnxMplsLabelOwner
Type Values:
0none
1rsvp
2tldp
3ildp
4svcmgr
5bgp
6mirror
7static
8vprn
9sr
.1.3.6.1.4.1.6527.3.1.2.6.18.1.2
.1.3.6.1.4.1.6527.3.1.2.6.19 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsStaticSvcLabelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsStaticSvcLabelTable'
The vRtrMplsStaticSvcLabelTable has an entry for each allocated label
that is part of the static service label range. This is a read-only
table.
vRtrMplsStaticSvcLabelEntry row .1.3.6.1.4.1.6527.3.1.2.6.19.1
Each row entry in the vRtrMplsStaticSvcLabelTable represents a label
of type static-svc that is currently allocated. The entry includes
information about the current owner for that label.
Column Syntax OID
The value of vRtrMplsStaticSvcLabel specifies the label value for a
static SVC.

The range of vRtrMplsStaticSvcLabel is dynamic and depends on the
value of vRtrMplsLabelStaticLabelRange.

The…
Unsigned32
Constraints:
range: 32-262112
.1.3.6.1.4.1.6527.3.1.2.6.19.1.1
The value of vRtrMplsStaticSvcLabelOwner specifies the owner for the
label value vRtrMplsStaticSvcLabel.
TmnxMplsLabelOwner
Type Values:
0none
1rsvp
2tldp
3ildp
4svcmgr
5bgp
6mirror
7static
8vprn
9sr
.1.3.6.1.4.1.6527.3.1.2.6.19.1.2

vRtrMplsSrlgGrpTable

table obsolete
.1.3.6.1.4.1.6527.3.1.2.6.21 · 1 row entry · 4 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsSrlgGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsSrlgGrpTable'
The vRtrMplsSrlgGrpTable has an entry for each Shared Risk Link Groups
(SRLG) group configured for MPLS in the system.
vRtrMplsSrlgGrpEntry row .1.3.6.1.4.1.6527.3.1.2.6.21.1
Each row entry represents a SRLG group on this virtual router
that participates in the MPLS protocol. A row can be created
or deleted via SNMP SET requests.
Column Syntax OID
The value of vRtrMplsSrlgGrpName indicates the SRLG group name.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.21.1.1
vRtrMplsSrlgGrpRowStatus is used to create, delete or
control entries in the vRtrMplsSrlgGrpTable. A value must
also be set for vRtrMplsSrlgGrpValue before the row entry can
transition to the 'active' state.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.21.1.2
The value of vRtrMplsSrlgGrpLastChanged indicates the timestamp of
last change to this row in vRtrMplsSrlgGrpTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.21.1.3
The value of vRtrMplsSrlgGrpValue specifies the group value
associated with vRtrMplsSrlgGrpName. This value is unique
within a virtual router instance.

At the time of row creation, a value for vRtrMplsSr…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.21.1.4
.1.3.6.1.4.1.6527.3.1.2.6.23 · 1 row entry · 3 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsIfSrlgGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsIfSrlgGrpTable'
The vRtrMplsIfSrlgGrpTable has an entry for each Shared Risk Link
Group (SRLG) groups associated with a router interface configured for
MPLS in the system.
vRtrMplsIfSrlgGrpEntry row .1.3.6.1.4.1.6527.3.1.2.6.23.1
Each row entry represents an SRLG group associated with a interface on
this virtual router that participates in the MPLS protocol.

A row can be created or deleted via SNMP SET requests.
Column Syntax OID
The value of vRtrMplsIfSrlgGrpName indicates the SRLG group name.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.23.1.1
vRtrMplsIfSrlgGrpRowStatus is used to create, delete or control
entries in the vRtrMplsIfSrlgGrpTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.23.1.2
The value of vRtrMplsIfSrlgGrpLastChanged indicates the timestamp of
last change to this row in vRtrMplsIfSrlgGrpTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.23.1.3
.1.3.6.1.4.1.6527.3.1.2.6.25 · 1 row entry · 40 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsP2mpInstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsP2mpInstTable'
vRtrMplsP2mpInstTable contains configuration information for the Mpls
Point to Multipoint (P2MP) Instance on a virtual router.
vRtrMplsP2mpInstEntry row .1.3.6.1.4.1.6527.3.1.2.6.25.1
vRtrMplsP2mpInstEntry is an entry (conceptual row) in the
vRtrMplsP2mpInstTable. Each entry represents the configuration for a
Mpls Point to Multipoint (P2MP) Instance.

Entries in this table can be created …
Column Syntax OID
The unique value which identifies this Point to Multipoint Labeled
Switch Path (P2MP LSP) for this virtual router in the Nokia
SROS system. It is a unique value among entries with the
same value of vRtrID.
TIMETRA-TC-MIBTmnxVRtrMplsLspID
Type Constraints:
range: 0..131070
.1.3.6.1.4.1.6527.3.1.2.6.25.1.1
vRtrMplsP2mpInstRowStatus is used to create, delete or control entries
in the vRtrMplsP2mpInstTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.25.1.2
The value of vRtrMplsP2mpInstLastChange indicates the timestamp of
last change to this row in vRtrMplsP2mpInstTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.25.1.3
The value of vRtrMplsP2mpInstName specifies the administrative name
for the P2MP instance which must be unique within a virtual router
instance.
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.25.1.4
The value of vRtrMplsP2mpInstType specifies the type of P2MP LSP
instance.
Enumerationr/w
Enumerated Values:
1other
2primary
.1.3.6.1.4.1.6527.3.1.2.6.25.1.5
The value of vRtrMplsP2mpInstProperties indicates the set of configured
properties for this path expressed as a bit map. For example, if the
path is an adaptive path, the bit corresponding to bit value 1 is set.
Bits
Enumerated Values:
0recordRoute
1adaptive
2cspf
3mergeable
4fastReroute
.1.3.6.1.4.1.6527.3.1.2.6.25.1.6
The value of vRtrMplsP2mpInstBandwidth specifies the amount of
bandwidth in megabits per second (Mbps) to be reserved for the P2MP
LSP.
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.25.1.7
The value of vRtrMplsP2mpInstState indicates the current working state
of this path within this P2MP LSP.
Enumeration
Enumerated Values:
1unknown
2active
3inactive
.1.3.6.1.4.1.6527.3.1.2.6.25.1.8
The value of vRtrMplsP2mpInstSetupPriority indicates the setup
priority to use when insufficient bandwidth is available to setup
a P2MP LSP. The setup priority is compared against the hold priority
of existing LSPs. I…
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.25.1.9
The value of vRtrMplsP2mpInstHoldPriority indicates the hold
priority to use when insufficient bandwidth is available to setup
a P2MP LSP. The setup priority is compared against the hold priority
of existing LSPs. If …
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.25.1.10
The value of vRtrMplsP2mpInstRecord specifies whether recording of all
hops that a P2MP LSP traverses is enabled. When the value of
vRtrMplsP2mpInstRecord is 'true', recording of all the hops that a
P2MP LSP traverses i…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.25.1.11
The value of vRtrMplsP2mpInstHopLimit specifies the maximum number
of hops that a P2MP LSP will traverse including the ingress and
egress ESRs. A P2MP LSP will not be setup if the hop limit is
exceeded.

Unsigned32r/w
Constraints:
range: 2-255
.1.3.6.1.4.1.6527.3.1.2.6.25.1.12
The value of vRtrMplsP2mpInstAdminState specifies desired
administrative state for this P2MP LSP.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.25.1.13
The value of vRtrMplsP2mpInstOperState indicates the current
operational state of this P2MP LSP.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.25.1.14
The value of vRtrMplsP2mpInstInheritance specifies whether or not
each writable object in this row inherits its value from its
corresponding object in the vRtrMplsLspTable. This object controls
whether to inherit the o…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.15
The value of vRtrMplsP2mpInstLspId indicates the value which
identifies the label switched path that is signaled for this entry.
MPLS-LSR-MIBMplsLSPID
Type Constraints:
range: 0..31
.1.3.6.1.4.1.6527.3.1.2.6.25.1.16
The value of vRtrMplsP2mpInstNegotiatedMTU indicates the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this P2MP LSP path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.17
The value of vRtrMplsP2mpInstFailCode indicates the reason code for
P2MP LSP Path failure. A value of 0 indicates that no failure has
occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.25.1.18
The value of vRtrMplsP2mpInstFailNodeArType indicates the type of
vRtrMplsP2mpInstFailNodeAddr. When no failure has occurred,
vRtrMplsP2mpInstFailNodeArType is 0.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.25.1.19
The value of vRtrMplsP2mpInstFailNodeAddr indicates the IP address of
the node in the P2MP LSP path at which the P2MP LSP path failed.
OctetString
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.25.1.20
The value of vRtrMplsP2mpInstAdminGrpInclude is a bit-map that
specifies a list of admin groups that should be included when this
P2MP LSP is setup. If bit 'n' is set, then the admin group with value
'n' is included for…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.21
The value of vRtrMplsP2mpInstAdminGrpExclude is a bit-map that
specifies a list of admin groups that should be excluded when this
P2MP LSP is setup. If bit 'n' is set, then the admin group with value
'n' is excluded for…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.22
The value of vRtrMplsP2mpInstAdaptive specifies whether
make-before-break functionality is enabled. If the value of
vRtrMplsP2mpInstAdaptive is set to 'true', it enables
make-before-break functionality for the P2MP LSP.…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.25.1.23
The value of vRtrMplsP2mpInstOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational P2MP LSP path.

When make-before-break functionality f…
megabpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.25.1.24
Setting the value of vRtrMplsP2mpInstResignal to 'doAction' triggers
the resignaling of the P2MP LSP path.

If the P2MP LSP path is operationally down either due to network
failure or due to the retry atte…
TIMETRA-TC-MIBTmnxActionTyper/w
Type Values:
1doAction
2notApplicable
.1.3.6.1.4.1.6527.3.1.2.6.25.1.25
The value of vRtrMplsP2mpInstOperMTU indicates the size for the
Maximum transmission unit (MTU) that is currently in operation for
this P2MP LSP Path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.26
The value of vRtrMplsP2mpInstRecordLabel specifies when the value of
vRtrMplsP2mpInstRecordLabel is 'record', recording of labels at each
node that a P2MP LSP traverses is enabled.

When the value of vRtrM…
Enumerationr/w
Enumerated Values:
1record
2noRecord
.1.3.6.1.4.1.6527.3.1.2.6.25.1.27
The value of vRtrMplsP2mpInstLastResigAttpt indicates the sysUpTime
when the last attempt to resignal this P2MP LSP was made.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.25.1.28
The value of vRtrMplsP2mpInstMetric indicates the cost of the traffic
engineered path returned by the IGP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.29
The value of vRtrMplsP2mpInstLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted.
TmnxMplsMBBType
Type Values:
0none
1configChange
2timerBasedResignal
3manualResignal
4globalRevert
5delayedRetry
6gracefulShutdown
7softPreemption
8pathChange
9autoBandwidth
10pceLspUpdate
.1.3.6.1.4.1.6527.3.1.2.6.25.1.30
The value of vRtrMplsP2mpInstLastMBBEnd indicates the sysUpTime when
the last MBB ended.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.25.1.31
The value of vRtrMplsP2mpInstLastMBBMetric indicates the
cost of the traffic engineered path for the P2MP LSP path prior to
MBB.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.32
The value of vRtrMplsP2mpInstLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break su…
Enumeration
Enumerated Values:
1none
2success
3fail
.1.3.6.1.4.1.6527.3.1.2.6.25.1.33
The value of vRtrMplsP2mpInstMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress.
TmnxMplsMBBType
Type Values:
0none
1configChange
2timerBasedResignal
3manualResignal
4globalRevert
5delayedRetry
6gracefulShutdown
7softPreemption
8pathChange
9autoBandwidth
10pceLspUpdate
.1.3.6.1.4.1.6527.3.1.2.6.25.1.34
The value of vRtrMplsP2mpInstMBBStarted indicates the sysUpTime when
the in-progress MBB started.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.25.1.35
The value of vRtrMplsP2mpInstMBBNextRetry indicates the amount of time
remaining in seconds before the next attempt is made to retry the
in-progress MBB.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.36
The value of vRtrMplsP2mpInstMBBRetryAttpts indicates 'n' where nth
attempt for the MBB is in progress.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.25.1.37
The value of vRtrMplsP2mpInstMBBFailCode indicates the reason code for
in-progress MBB failure. A value of 'none' indicates that no failure
has occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.25.1.38
The value of vRtrMplsP2mpInstMBBFailNodeType indicates the type of
vRtrMplsP2mpInstMBBFailNodeAddr. A value of 'unknown' indicates that
no failure has occurred.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.25.1.39
The value of vRtrMplsP2mpInstMBBFailNodeAddr indicates the IP address
of the node in the P2MP LSP path at which the in-progress MBB failed.
A value of 'unknown' for vRtrMplsP2mpInstMBBFailNodeType and empty
string for v…
OctetString
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.25.1.40
.1.3.6.1.4.1.6527.3.1.2.6.26 · 1 row entry · 10 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsP2mpInstStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsP2mpInstStatTable'
The vRtrMplsP2mpInstStatTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system.
vRtrMplsP2mpInstStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.26.1
Each row entry represents a collection of statistics for a P2MP
Labeled Switch Path (LSP) configured for a virtual router in the
system.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsP2mpInstStatS2lChanges indicates the number of
S2l changes this P2MP LSP has had. For every S2l change (S2l down, S2l
up, S2l change), a corresponding syslog/trap (if enabled) is generated
for it.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.26.1.1
The value of vRtrMplsP2mpInstStatLastS2lChange indicates the time
since the last change occurred on this P2MP LSP.
centisecondsTIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.26.1.2
The value of vRtrMplsP2mpInstStatConfiguredS2ls indicates the number
of S2ls configured for this P2MP LSP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.26.1.3
The value of vRtrMplsP2mpInstStatOperationalS2ls indicates the number
of operational S2ls for this P2MP LSP. This includes the S2ls
currently active.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.26.1.4
The value of vRtrMplsP2mpInstStatLastS2lTimeUp indicates the total
time that this S2l has been operational.
centisecondsTIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.26.1.5
The value of vRtrMplsP2mpInstStatLastS2lTimeDown indicates the total
time that this S2l has not been operational.
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.26.1.6
The value of vRtrMplsP2mpInstStatTimeUp indicates the total time that
this P2MP instance has been operational.
centisecondsTIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.26.1.7
The value of vRtrMplsP2mpInstStatTimeDown indicates the total time
that this P2MP instance has not been operational.
TIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.26.1.8
The The value of vRtrMplsP2mpInstStatTransitions indicates the number
of state transitions (up -> down and down -> up) this P2mp instance
has undergone.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.26.1.9
The value of vRtrMplsP2mpInstStatLastTrans indicates the time since
the last transition occurred on this P2mp instance.
ten-millisecondsTIMETRA-TC-MIBTmnxTimeInterval .1.3.6.1.4.1.6527.3.1.2.6.26.1.10
.1.3.6.1.4.1.6527.3.1.2.6.28 · 1 row entry · 38 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsS2lSubLspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsS2lSubLspTable'
The vRtrMplsS2lSubLspTable provides an association between an P2MP LSP
and a source to leaf (S2L) sub LSP path called as S2L here. A P2MP LSP
can have more than one S2L sub LSP association.
vRtrMplsS2lSubLspEntry row .1.3.6.1.4.1.6527.3.1.2.6.28.1
Each row entry represents an association between a Labeled Switch
Path (P2MP LSP) in the vRtrMplsP2mpInstTable and a S2L sub LSP entry in
the vRtrMplsS2lSubLspTable. Entries in this table can be created and
deleted via…
Column Syntax OID
The value of vRtrMplsS2lSubLspDstAddrType indicates the type of
vRtrMplsS2lSubLspDstAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.28.1.1
The value of vRtrMplsS2lSubLspDstAddr indicates the IP address of the
destination address of the S2L sub LSP.
OctetString
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.28.1.2
The value of vRtrMplsS2lSubLspRowStatus specifies row status used for
creation, deletion, or control of vRtrMplsLspPathTable entries. Before
the row can be placed into the 'active' state vRtrMplsS2lSubLspType must
have…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.28.1.3
The value of vRtrMplsS2lSubLspLastChange indicates the sysUpTime when
this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.28.1.4
The value of vRtrMplsS2lSubLspType indicates the value that represents
the role this S2L sub LSP is taking within this P2MP LSP.
Enumeration
Enumerated Values:
1s2lPath
.1.3.6.1.4.1.6527.3.1.2.6.28.1.5
The value of vRtrMplsS2lSubLspProperties indicates the set of
configured properties. For example, if the S2L sub LSP is an adaptive
S2L sub LSP, the bit corresponding to bit value 1 is set.
Bits
Enumerated Values:
0recordRoute
1adaptive
2cspf
3mergeable
4fastReroute
.1.3.6.1.4.1.6527.3.1.2.6.28.1.6
The value of vRtrMplsS2lSubLspState indicates the current working
state of this S2L sub LSP within this LSP.
Enumeration
Enumerated Values:
1unknown
2active
3inactive
.1.3.6.1.4.1.6527.3.1.2.6.28.1.7
The value of vRtrMplsS2lSubLspAdminState specifies the desired
administrative state for this P2MP S2L sub LSP.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.28.1.8
The value of vRtrMplsS2lSubLspOperState indicates the current
operational state of this P2MP S2L sub LSP.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.28.1.9
The value of vRtrMplsS2lSubGroupId indicates the value which
identifies the group for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.10
The value of vRtrMplsS2lSubLspId indicates the value which identifies
the label switched path that is signaled for this entry.
MPLS-LSR-MIBMplsLSPID
Type Constraints:
range: 0..31
.1.3.6.1.4.1.6527.3.1.2.6.28.1.11
The value of vRtrMplsS2lSubLspRetryTimeRemain indicates the time to
signal this S2L sub LSP.
centisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.12
The value of vRtrMplsS2lSubLspTunARHopLtIndex indicates Primary index
into the mplsTunnelARHopTable identifying a particular recorded hop
list. A value of 0 implies that there is no recorded hop list
associated with thi…
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.28.1.13
The value of vRtrMplsS2lSubLspNegotiatedMTU indicates the size for the
Maximum transmission unit (MTU) that is negotiated during
establishment of this P2MP LSP Path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.14
The value of vRtrMplsS2lSubLspFailCode indicates the reason code for
P2MP LSP Path failure. A value of 0 indicates that no failure has
occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.28.1.15
The value of vRtrMplsS2lSubLspFailNodeArType indicates type of
vRtrMplsS2lSubLspFailNodeAddr. When no failure has occurred, this
value is 0.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.28.1.16
The value of vRtrMplsS2lSubLspFailNodeAddr indicates the IP address of
the node in the P2MP S2L sub LSP at which the P2MP S2L sub LSP failed.
OctetString
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.28.1.17
The value of vRtrMplsS2lSubLspOperBandwidth indicates the amount of
bandwidth in megabits per seconds (Mbps) that has been reserved for
the operational P2MP S2L sub LSP.

When make-before-break functionali…
megabpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.28.1.18
The value of vRtrMplsS2lSubLspTunCRHopLtIndex indicates primary index
into the vRtrMplsTunnelCHopTable identifying a particular computed hop
list. A value of 0 implies that there is no computed hop list
associated with …
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.28.1.19
The value of vRtrMplsS2lSubLspOperMTU indicates the size for the
Maximum transmission unit (MTU) that is currently operation for this
P2MP LSP Path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.20
The value of vRtrMplsS2lSubLspLastResigAttpt indicates the sysUpTime
when the last attempt to resignal this LSP was made.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.28.1.21
The value of vRtrMplsS2lSubLspLastMBBType indicates the type of
last Make-before-break (MBB). If 'none', then no MBB has been
attempted.
TmnxMplsMBBType
Type Values:
0none
1configChange
2timerBasedResignal
3manualResignal
4globalRevert
5delayedRetry
6gracefulShutdown
7softPreemption
8pathChange
9autoBandwidth
10pceLspUpdate
.1.3.6.1.4.1.6527.3.1.2.6.28.1.22
The value of vRtrMplsS2lSubLspLastMBBEnd indicates the sysUpTime when
the last MBB ended.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.28.1.23
The value of vRtrMplsS2lSubLspLastMBBMetric indicates the
cost of the traffic engineered S2L sub LSP for the S2L sub LSP
prior to MBB.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.24
The value of vRtrMplsS2lSubLspLastMBBState indicates whether the last
Make-before-break was successful or failed.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break s…
Enumeration
Enumerated Values:
1none
2success
3fail
.1.3.6.1.4.1.6527.3.1.2.6.28.1.25
The value of vRtrMplsS2lSubLspMBBTypeInProg indicates the type of the
Make-before-break (MBB) that is in progress. If 'none', then no MBB is
in progress.
TmnxMplsMBBType
Type Values:
0none
1configChange
2timerBasedResignal
3manualResignal
4globalRevert
5delayedRetry
6gracefulShutdown
7softPreemption
8pathChange
9autoBandwidth
10pceLspUpdate
.1.3.6.1.4.1.6527.3.1.2.6.28.1.26
The value of vRtrMplsS2lSubLspMBBStarted indicates the sysUpTime when
the in-progress MBB started.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.28.1.27
The value of vRtrMplsS2lSubLspMBBNextRetry indicates the amount of
time remaining in seconds before the next attempt is made to retry the
in-progress MBB.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.28
The value of vRtrMplsS2lSubLspMBBRetryAttpts indicates 'n' where nth
attempt for the MBB is in progress.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.29
The value of vRtrMplsS2lSubLspMBBFailCode indicates the reason code
for in-progress MBB failure. A value of 'none' indicates that no
failure has occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
27localLinkMaintenance
28unexpectedCtObject
29unsupportedCt
30invalidCt
31invCtAndSetupPri
32invCtAndHoldPri
33invCtAndSetupAndHoldPri
34localNodeMaintenance
35softPreemption
36p2mpNotSupported
37badXro
38localNodeInXro
39routeBlockedByXro
40xroTooComplex
41rsvpNotSupported
42conflictingAdminGroups
43nodeInIgpOverload
44srTunnelDown
45fibAddFailed
46labelStackExceeded
47pccDown
48pccError
49pceDown
50pceError
51pceUpdateWithEmptyEro
52pceInitLspDisabled
53adminDown
54sidHopsInRsvpLsp
55ipv6HopsInRsvpLsp
56ipv4HopsInIpv6Lsp
57ipv6HopsInIpv4Lsp
58sidHopsInIpv6Lsp
59srlgPathWithSidHops
60mplsV4Down
61mplsV6Down
62lspAdminDown
63pathAdminDown
64templateAdminDown
.1.3.6.1.4.1.6527.3.1.2.6.28.1.30
The value of vRtrMplsS2lSubLspMBBFailNodeType indicates the type of
vRtrMplsS2lSubLspMBBFailNodeAddr. A value of 'unknown' indicates that
no failure has occurred.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.28.1.31
The value of vRtrMplsS2lSubLspMBBFailNodeAddr indicates the IP address
of the node in the S2L sub LSP at which the in-progress MBB failed. A
value of 'unknown' for vRtrMplsS2lSubLspMBBFailNodeType and empty
string for v…
OctetString
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.28.1.32
The value of vRtrMplsS2lSubLspUpTime indicates the timestamp when the
S2l came up.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.28.1.33
The value of vRtrMplsS2lSubLspDownTime indicates the timestamp when
the S2l went down.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.28.1.34
The value of vRtrMplsS2lSubLspIsFastRetry indicates which retry timer
is being referred to by vRtrMplsS2lSubLspRetryTimeRemain.

When the value of vRtrMplsLspPathIsFastRetry is set to 'true',
vRtrMplsLspPa…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.28.1.35
The value of vRtrMplsS2lSubLspTimeoutIn indicates the amount of time
remaining, in seconds, for the S2L path state to time out after the
initial PATH message has been sent. If the timer expires and the S2L
path has not …
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.36
The value of vRtrMplsS2lSubLspMBBTimeoutIn indicates the amount of
time remaining, in seconds, for the in-progress S2L MBB path state to
time out after the initial PATH message has been sent. If the timer
expires and th…
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.28.1.37
The value of vRtrMplsS2lSubLspInterArea indicates whether the LSP path
is either inter-area or intra-area.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.28.1.38
.1.3.6.1.4.1.6527.3.1.2.6.29 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsS2lSubLspStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsS2lSubLspStatTable'
The vRtrMplsS2lSubLspStatTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system.
vRtrMplsS2lSubLspStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.29.1
Each row entry represents a collection of statistics for a P2MP Source
to Leaf (S2L) Sub Labeled Switch Path (LSP) configured for a i virtual
router in the system.

Entries cannot be created and deleted via …
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsS2lSubLspTimeUp indicates the total time that
this LSP S2l has been operational. For example, the percentage up
time can be determined by computing
(vRtrMplsS2lSubLspTimeUp/vRtrMplsLspAge * 100 %).
centisecondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
.1.3.6.1.4.1.6527.3.1.2.6.29.1.1
The value of vRtrMplsS2lSubLspTimeDown indicates the total time that
this LSP S2l has not been operational.
centisecondsSNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
.1.3.6.1.4.1.6527.3.1.2.6.29.1.2
The value of vRtrMplsS2lSubLspRetryAttempts indicates the number of
unsuccessful attempts which have been made to signal this S2l. As soon
as the S2l gets signalled, this is set to 0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.29.1.3
The value of vRtrMplsS2lSubLspTransitionCount indicates the number of
transitions that have occurred for this LSP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.29.1.4
The value of vRtrMplsS2lSubLspCspfQueries indicates the number of CSPF
queries that have been made for this LSP S2l.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.29.1.5
.1.3.6.1.4.1.6527.3.1.2.6.31 · 1 row entry · 4 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsSrlgDBRtrIdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsSrlgDBRtrIdTable'
The vRtrMplsSrlgDBRtrIdTable has an entry for each router-id
configured under user Shared Risk Link Group (SRLG) database. The user
 manually enters the SRLG membership information for any link
 in the network, into the user SRLG database.
vRtrMplsSrlgDBRtrIdEntry row .1.3.6.1.4.1.6527.3.1.2.6.31.1
Each row entry represents a router ID under which interface entries
would be configured for the SRLG database table.

A row can be created or deleted via SNMP SET requests.
Column Syntax OID
The value of vRtrMplsSrlgDBRtrIdRouterID specifies a 32-bit integer uniquely
identifying the router in the Autonomous System. By convention
to ensure uniqueness, this may default to the value of one of the
router's IPv…
TmnxMplsRouterId
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.31.1.1
vRtrMplsSrlgDBRtrIdRowStatus is used to create, delete or control
entries in the vRtrMplsSrlgDBRtrIdTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.31.1.2
The value of vRtrMplsSrlgDBRtrIdAdminState specifies the desired
administrative state for the router-id entry in the
vRtrMplsSrlgDBRtrIdTable.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.31.1.3
The value of vRtrMplsSrlgDBRtrIdLastChanged indicates the timestamp of
last change to this row in vRtrMplsSrlgDBRtrIdTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.31.1.4
.1.3.6.1.4.1.6527.3.1.2.6.33 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsSrlgDBIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsSrlgDBIfTable'
The vRtrMplsSrlgDBIfTable has an entry for each Shared Risk Link Group
(SRLG) groups associated with a interface which is validated as part
of a router ID in the routing table. The user manually enters the SRLG
membership information for any link in the network, into the user SRLG
database.
vRtrMplsSrlgDBIfEntry row .1.3.6.1.4.1.6527.3.1.2.6.33.1
Each row entry represents an SRLG group associated with a interface
which is validated as part of a router ID in the routing table.

A row can be created or deleted via SNMP SET requests.
Column Syntax OID
The value of vRtrMplsSrlgDBIfIntIpAddrType indicates the type of
vRtrMplsSrlgDBIfIntIpAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.33.1.1
The value of vRtrMplsSrlgDBIfIntIpAddr indicates the IP address of the
interface.
OctetString
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.33.1.2
The value of vRtrMplsSrlgDBIfSrlgGroupName indicates the SRLG group
name.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.33.1.3
vRtrMplsSrlgDBIfRowStatus is used to create, delete or control entries
in the vRtrMplsSrlgDBIfTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.33.1.4
The value of vRtrMplsSrlgDBIfLastChanged indicates the timestamp of
last change to this row in vRtrMplsSrlgDBIfTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.33.1.5
.1.3.6.1.4.1.6527.3.1.2.6.34 · 1 row entry · 1 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsInSegmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsInSegmentTable'
The vRtrMplsInSegmentTable augments the mplsInSegmentTable in the
MPLS-LSR-MIB.
vRtrMplsInSegmentEntry row .1.3.6.1.4.1.6527.3.1.2.6.34.1
A row entry in this table corresponds to a row entry in the
mplsInSegmentTable and adds to the information contained in that
table.
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsInSegmentNumS2ls indicates number of S2Ls on the
insegment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.34.1.1
.1.3.6.1.4.1.6527.3.1.2.6.35 · 1 row entry · 1 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsOutSegmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsOutSegmentTable'
The vRtrMplsOutSegmentTable augments the mplsOutSegmentTable in the
MPLS-LSR-MIB.
vRtrMplsOutSegmentEntry row .1.3.6.1.4.1.6527.3.1.2.6.35.1
A row entry in this table corresponds to a row entry in the
mplsOutSegmentTable and adds to the information contained in that
table.
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsOutSegmentNumS2ls indicates number of S2Ls on the
outsegment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.35.1.1
.1.3.6.1.4.1.6527.3.1.2.6.38 · 1 row entry · 9 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspStatsTable'
vRtrMplsLspStatsTable controls Statistics in the ess data path at the
ingress Label Switched Path (LSP) for an Mpls-Lsp FEC.
vRtrMplsLspStatsEntry row .1.3.6.1.4.1.6527.3.1.2.6.38.1
A row in this table represents information about the Statistics
collection per MPLS LSP.
Column Syntax OID
The value of vRtrMplsLspStatsType indicates the type of statistics.
Enumeration
Enumerated Values:
0egress
1ingress
2srTeEgress
.1.3.6.1.4.1.6527.3.1.2.6.38.1.1
The value of vRtrMplsLspStatsSenderAddrType indicates address type of
vRtrMplsLspStatsSenderAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.38.1.2
The value of vRtrMplsLspStatsSenderAddr indicates the sender address.
OctetString
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6527.3.1.2.6.38.1.3
The value of vRtrMplsLspStatsLspName indicates the lsp name.

If vRtrMplsLspType is not 'meshP2p' or 'oneHopP2p',
vRtrMplsLspStatsLspName can have a maximum of 32 characters.
TIMETRA-TC-MIBTLNamedItem
Type Constraints:
range: 1..64
.1.3.6.1.4.1.6527.3.1.2.6.38.1.4
vRtrMplsLspStatsRowStatus is used for the creation or deletion of
entries in the vRtrMplsLspStatsTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.38.1.5
The value of vRtrMplsLspStatsLastChanged indicates the time stamp of
the last change to this row of this table.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.38.1.6
The value of vRtrMplsLspStatsCollectStats specifies whether to collect
statistics for this prefix.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.38.1.7
The value of vRtrMplsLspStatsAccntingPolicy specifies the accounting
policy to be used for this entry.

A value of zero indicates that the default accounting policy should be
used.
Unsigned32r/w
Constraints:
range: 0-99
.1.3.6.1.4.1.6527.3.1.2.6.38.1.8
The value of vRtrMplsLspStatsAdminState specifies whether egress
statistics are enabled for this lsp.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.38.1.9
.1.3.6.1.4.1.6527.3.1.2.6.39 · 1 row entry · 101 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspStatisticsTable'
The vRtrMplsLspStatisticsTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system.
vRtrMplsLspStatisticsEntry row .1.3.6.1.4.1.6527.3.1.2.6.39.1
Each row entry represents a collection of statistics for a Labeled
Switch Path (LSP) configured for a virtual router in the system.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsInProfilePktsFc0 indicates the number of in
profile packets received for Forwarding Class 0.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.1
The value of vRtrMplsInProfilePktsFc0Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.2
The value of vRtrMplsInProfilePktsFc0High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.3
The value of vRtrMplsInProfilePktsFc1 indicates the number of in
profile packets received for Forwarding Class 1.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.4
The value of vRtrMplsInProfilePktsFc1Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.5
The value of vRtrMplsInProfilePktsFc1High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.6
The value of vRtrMplsInProfilePktsFc2 indicates the number of in
profile packets received for Forwarding Class 2.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.7
The value of vRtrMplsInProfilePktsFc2Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.8
The value of vRtrMplsInProfilePktsFc2High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.9
The value of vRtrMplsInProfilePktsFc3 indicates the number of in
profile packets received for Forwarding Class 3.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.10
The value of vRtrMplsInProfilePktsFc3Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.11
The value of vRtrMplsInProfilePktsFc3High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.12
The value of vRtrMplsInProfilePktsFc4 indicates the number of in
profile packets received for Forwarding Class 4.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.13
The value of vRtrMplsInProfilePktsFc4Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.14
The value of vRtrMplsInProfilePktsFc4High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.15
The value of vRtrMplsInProfilePktsFc5 indicates the number of in
profile packets received for Forwarding Class 5.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.16
The value of vRtrMplsInProfilePktsFc5Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.17
The value of vRtrMplsInProfilePktsFc5High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.18
The value of vRtrMplsInProfilePktsFc6 indicates the number of in
profile packets received for Forwarding Class 6.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.19
The value of vRtrMplsInProfilePktsFc6Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.20
The value of vRtrMplsInProfilePktsFc6High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.21
The value of vRtrMplsInProfilePktsFc7 indicates the number of in
profile packets received for Forwarding Class 7.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.22
The value of vRtrMplsInProfilePktsFc7Low32 indicates the lower 32 bits
of the value of vRtrMplsInProfilePktsFc7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.23
The value of vRtrMplsInProfilePktsFc7High32 indicates the higher 32
bits of the value of vRtrMplsInProfilePktsFc7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.24
The value of vRtrMplsInProfileOctetsFc0 indicates the number of in
profile octets received for Forwarding Class 0.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.25
The value of vRtrMplsInProfileOctetsFc0Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.26
The value of vRtrMplsInProfileOctetsFc0High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.27
The value of vRtrMplsInProfileOctetsFc1 indicates the number of in
profile octets received for Forwarding Class 1.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.28
The value of vRtrMplsInProfileOctetsFc1Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.29
The value of vRtrMplsInProfileOctetsFc1High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.30
The value of vRtrMplsInProfileOctetsFc2 indicates the number of in
profile octets received for Forwarding Class 2.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.31
The value of vRtrMplsInProfileOctetsFc2Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.32
The value of vRtrMplsInProfileOctetsFc2High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.33
The value of vRtrMplsInProfileOctetsFc3 indicates the number of in
profile octets received for Forwarding Class 3.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.34
The value of vRtrMplsInProfileOctetsFc3Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.35
The value of vRtrMplsInProfileOctetsFc3High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.36
The value of vRtrMplsInProfileOctetsFc4 indicates the number of in
profile octets received for Forwarding Class 4.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.37
The value of vRtrMplsInProfileOctetsFc4Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.38
The value of vRtrMplsInProfileOctetsFc4High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.39
The value of vRtrMplsInProfileOctetsFc5 indicates the number of in
profile octets received for Forwarding Class 5.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.40
The value of vRtrMplsInProfileOctetsFc5Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.41
The value of vRtrMplsInProfileOctetsFc5High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.42
The value of vRtrMplsInProfileOctetsFc6 indicates the number of in
profile octets received for Forwarding Class 6.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.43
The value of vRtrMplsInProfileOctetsFc6Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.44
The value of vRtrMplsInProfileOctetsFc6High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.45
The value of vRtrMplsInProfileOctetsFc7 indicates the number of in
profile octets received for Forwarding Class 7.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.46
The value of vRtrMplsInProfileOctetsFc7Low32 indicates the lower 32
bits of the value of vRtrMplsInProfileOctetsFc7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.47
The value of vRtrMplsInProfileOctetsFc7High32 indicates the higher 32
bits of the value of vRtrMplsInProfileOctetsFc7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.48
The value of vRtrMplsOutOfProfPktsFc0 indicates the number of out of
profile packets received for Forwarding Class 0.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.49
The value of vRtrMplsOutOfProfPktsFc0Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.50
The value of vRtrMplsOutOfProfPktsFc0High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.51
The value of vRtrMplsOutOfProfPktsFc1 indicates the number of out of
profile packets received for Forwarding Class 1.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.52
The value of vRtrMplsOutOfProfPktsFc1Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.53
The value of vRtrMplsOutOfProfPktsFc1High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.54
The value of vRtrMplsOutOfProfPktsFc2 indicates the number of out of
profile packets received for Forwarding Class 2.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.55
The value of vRtrMplsOutOfProfPktsFc2Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.56
The value of vRtrMplsOutOfProfPktsFc2High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.57
The value of vRtrMplsOutOfProfPktsFc3 indicates the number of out of
profile packets received for Forwarding Class 3.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.58
The value of vRtrMplsOutOfProfPktsFc3Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.59
The value of vRtrMplsOutOfProfPktsFc3High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.60
The value of vRtrMplsOutOfProfPktsFc4 indicates the number of out of
profile packets received for Forwarding Class 4.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.61
The value of vRtrMplsOutOfProfPktsFc4Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.62
The value of vRtrMplsOutOfProfPktsFc4High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.63
The value of vRtrMplsOutOfProfPktsFc5 indicates the number of out of
profile packets received for Forwarding Class 5.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.64
The value of vRtrMplsOutOfProfPktsFc5Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.65
The value of vRtrMplsOutOfProfPktsFc5High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.66
The value of vRtrMplsOutOfProfPktsFc6 indicates the number of out of
profile packets received for Forwarding Class 6.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.67
The value of vRtrMplsOutOfProfPktsFc6Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.68
The value of vRtrMplsOutOfProfPktsFc6High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.69
The value of vRtrMplsOutOfProfPktsFc7 indicates the number of out of
profile packets received for Forwarding Class 7.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.70
The value of vRtrMplsOutOfProfPktsFc7Low32 indicates the lower 32 bits
of the value of vRtrMplsOutOfProfPktsFc7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.71
The value of vRtrMplsOutOfProfPktsFc7High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfPktsFc7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.72
The value of vRtrMplsOutOfProfOctetsFc0 indicates the number of out of
profile octets received for Forwarding Class 0.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.73
The value of vRtrMplsOutOfProfOctetsFc0Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.74
The value of vRtrMplsOutOfProfOctetsFc0High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.75
The value of vRtrMplsOutOfProfOctetsFc1 indicates the number of out of
profile octets received for Forwarding Class 1.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.76
The value of vRtrMplsOutOfProfOctetsFc1Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.77
The value of vRtrMplsOutOfProfOctetsFc1High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.78
The value of vRtrMplsOutOfProfOctetsFc2 indicates the number of out of
profile octets received for Forwarding Class 2.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.79
The value of vRtrMplsOutOfProfOctetsFc2Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.80
The value of vRtrMplsOutOfProfOctetsFc2High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.81
The value of vRtrMplsOutOfProfOctetsFc3 indicates the number of out of
profile octets received for Forwarding Class 3.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.82
The value of vRtrMplsOutOfProfOctetsFc3Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.83
The value of vRtrMplsOutOfProfOctetsFc3High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.84
The value of vRtrMplsOutOfProfOctetsFc4 indicates the number of out of
profile octets received for Forwarding Class 4.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.85
The value of vRtrMplsOutOfProfOctetsFc4Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.86
The value of vRtrMplsOutOfProfOctetsFc4High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.87
The value of vRtrMplsOutOfProfOctetsFc5 indicates the number of out of
profile octets received for Forwarding Class 5.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.88
The value of vRtrMplsOutOfProfOctetsFc5Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.89
The value of vRtrMplsOutOfProfOctetsFc5High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.90
The value of vRtrMplsOutOfProfOctetsFc6 indicates the number of out of
profile octets received for Forwarding Class 6.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.91
The value of vRtrMplsOutOfProfOctetsFc6Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.92
The value of vRtrMplsOutOfProfOctetsFc6High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.93
The value of vRtrMplsOutOfProfOctetsFc7 indicates the number of out of
profile octets received for Forwarding Class 7.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.94
The value of vRtrMplsOutOfProfOctetsFc7Low32 indicates the lower 32
bits of the value of vRtrMplsOutOfProfOctetsFc7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.95
The value of vRtrMplsOutOfProfOctetsFc7High32 indicates the higher 32
bits of the value of vRtrMplsOutOfProfOctetsFc7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.39.1.96
The value of vRtrMplsLspStatsPSBMatch indicates if a path state block
(PSB) match was made against this LSP name.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.39.1.97
The value of vRtrMplsLspStatsTpOnly indicates whether the statistics
apply to mpls-tp lsp or for regular rsvp-te signalled terminating LSP.

The value of 'true' indicates the statistics apply to mpls-tp LS…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.39.1.98
The value of vRtrMplsLspStatsLspType indicates whether the statistics
apply to MPLS-TP, P2P, P2MP, SR-TE, PCE-INIT SR-TE, Auto P2P, Auto
SR-TE or Auto P2MP LSP.

When the value of vRtrMplsLspStatsTpOnly i…
Enumeration
Enumerated Values:
0unknown
1p2p
2p2mp
3autoP2p
4autoP2mp
5tpLsp
6srTe
7autoSrTe
8pceInitSrTe
.1.3.6.1.4.1.6527.3.1.2.6.39.1.99
The value of vRtrMplsLspAggregatePkts indicates the sum total of all
in profile and out profile packets received for all Forwarding
Classes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.100
The value of vRtrMplsLspAggregateOctets indicates the sum total of all
in profile and out profile octets received for all Forwarding
Classes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.39.1.101
.1.3.6.1.4.1.6527.3.1.2.6.41 · 1 row entry · 67 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable'
The vRtrMplsLspTemplateTable has an entry for each Labeled Switch Path
Template(LSP Template) configured for a virtual router in the system.
          
The table contains a list of LSP Templates that are referenced when
dynamic LSP creation is required.
vRtrMplsLspTemplateEntry row .1.3.6.1.4.1.6527.3.1.2.6.41.1
Each row entry represents a Labeled Switch Path Template (LSP
Template) configured for a virtual router in the system.

Entries in this table can be created and deleted via SNMP SET
operations.
Column Syntax OID
The value of the object vRtrMplsLspTemplateName specifies the name of
the LSP Template which is used as a guideline to create and signal
multiple LSP instances when dynamic LSP creation is required.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.41.1.1
The value of vRtrMplsLspTemplateRowStatus specifies the Row Status for
this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.41.1.2
The value of vRtrMplsLspTemplateLastChanged indicates the timestamp of
last change to this row in vRtrMplsLspTemplateTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.41.1.3
The value of vRtrMplsLspTemplateAdminState specifies the current
administrative state of the LSP Template.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.41.1.4
The value of vRtrMplsLspTemplateType specifies the type of the LSP
template.

The value of vRtrMplsLspTemplateType means:
'p2mp (1)' - auto creation of P2MP LSPs.
'onehopP2P (2)' - auto creation…
Enumerationr/w
Enumerated Values:
0unknown
1p2mp
2onehopP2P
3meshP2P
4onehopP2PSrTe
5meshP2PSrTe
6pceInitP2PSrTe
8reserved8
.1.3.6.1.4.1.6527.3.1.2.6.41.1.5
The value of vRtrMplsLspTemplateAdaptive specifies whether the
make-before-break functionality is enabled for the LSPs that are
dynamically created using this LSP template.

When the value of vRtrMplsLspTe…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.6
The value of vRtrMplsLspTemplateBandwidth specifies the amount of
bandwidth in megabits per seconds (Mbps) to be reserved for the LSPs
that are dynamically created using this LSP template. A value of zero
(0) indicates …
megabpsInteger32r/w
Constraints:
range: 0-6400000
.1.3.6.1.4.1.6527.3.1.2.6.41.1.7
The value of vRtrMplsLspTemplateCspf specifies whether the CSPF
computation for constrained-path LSP is enabled for the LSPs that are
dynamically created using this LSP template.

When the value of vRtrMpl…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.8
The value of vRtrMplsLspTemplateDefaultPath specifies the default path
used to signal LSPs that are dynamically created using this LSP
template.

If a corresponding index does not exist in
MPLS-TE-MIB::mpl…
MPLS-TE-MIBMplsTunnelIndexr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.6527.3.1.2.6.41.1.9
The value of vRtrMplsLspTemplateAdmGrpIncl specifies a bit-map of
admin groups that are included when the dynamically created LSPs using
this template are setup .

If bit 'n' is set, then the admin group w…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.41.1.10
The value of vRtrMplsLspTemplateAdmGrpExcl specifies a bit-map of
admin groups that are excluded when the dynamically created LSPs using
this template are setup.

If bit 'n' is set, then the admin group wi…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.41.1.11
The value of vRtrMplsLspTemplateFastReroute specifies whether fast
reroute is enabled for the LSPs that are dynamically created using
this LSP template.

When the value of vRtrMplsLspTemplateFastReroute is…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.12
The value of vRtrMplsLspTemplateFRMethod specifies the fast reroute
method used for the LSPs that are dynamically created using this LSP
template.

When the value of vRtrMplsLspTemplateFRMethod is set to
'…
Enumerationr/w
Enumerated Values:
1oneToOneBackup
2facilityBackup
.1.3.6.1.4.1.6527.3.1.2.6.41.1.13
The value of vRtrMplsLspTemplateFRHopLimit specifies the total number
of hops a detour or backup LSP can take before merging back onto the
main LSP path.
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.3.1.2.6.41.1.14
The value of vRtrMplsLspTemplateHopLimit specifies the maximum number
of hops that a dynamically created LSP will traverse including the
ingress and egress ESRs. A LSP will not be set up if the hop limit is
exceeded.
Unsigned32r/w
Constraints:
range: 2-255
.1.3.6.1.4.1.6527.3.1.2.6.41.1.15
The value of vRtrMplsLspTemplateRecord specifies whether the
recording of all the hops is enabled for LSPs that are dynamically
created using this template.

When the value of vRtrMplsLspTemplateRecord is…
Enumerationr/w
Enumerated Values:
1record
2noRecord
.1.3.6.1.4.1.6527.3.1.2.6.41.1.16
The value of vRtrMplsLspTemplateRecordLabel specifies whether the
recording of labels is enabled for LSPs that are dynamically created
using this LSP template .

When the value of vRtrMplsLspTemplateRecord…
Enumerationr/w
Enumerated Values:
1record
2noRecord
.1.3.6.1.4.1.6527.3.1.2.6.41.1.17
The value of vRtrMplsLspTemplateRetryLimit specifies the maximum
number of attempts made to establish an LSP that is dynamically
created using this template. A value of zero(0) specifies that an
infinite number of retry…
Unsigned32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.6527.3.1.2.6.41.1.18
The value of vRtrMplsLspTemplateRetryTimer specifies the time in
seconds a dynamically created Lsp waits before it attempts to
re-establish itself.
secondsUnsigned32r/w
Constraints:
range: 1-600
.1.3.6.1.4.1.6527.3.1.2.6.41.1.19
The value of vRtrMplsLspTemplateCspfTeMetric specifies whether the TE
metric is used for the purpose of the LSP path computation by CSPF
(Constrained Shortest Path First).

When the value of vRtrMplsLspTem…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.20
The value of vRtrMplsLspTemplateLspCount indicates the number of LSPs
of type 'p2mpAuto' that are created using this template.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.41.1.21
The value of vRtrMplsLspTemplateMvpnRefCount indicates the number of
MVPNs as well as number of P2MP LSP users associated to this template.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.41.1.22
The value of vRtrMplsLspTemplateFRPropAdmGrp specifies whether or not
the use of administrative group constraints on a FRR backup LSP is
enabled.

If vRtrMplsLspTemplateFastReroute is set to 'true', the va…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.23
The value of vRtrMplsLspTemplatePropAdmGrp specifies whether the
propagation of session attribute object with resource affinity
(C-type 1) in PATH message is enabled for the LSPs that
are dynamically created using this…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.24
The value of vRtrMplsLspTemplateBgpShortcut specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving BGP routes.

When the value of vRtrMplsLspTemplateBgpShortcut is…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.25
The value of vRtrMplsLspTemplateIgpShortcut specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving IGP routes.

When the value of vRtrMplsLspTemplateIgpShortcut is…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.26
The value of vRtrMplsLspTemplateLdpOverRsvp specifies that this LSP can
be included by IGP to calculate its SPF tree. The IGP (OSPF or ISIS)
will subsequently provide LDP with all ECMP IGP next-hops and tunnel
endpoint…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.27
The value of vRtrMplsLspTemplateLeastFill specifies whether the use of
the least-fill path selection method for the computation of the path
of this LSP template is enabled.

By default, the path of an LSP …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.28
The value of vRtrMplsLspTemplateMetric specifies the metric for this
LSP which is used to select an LSP among a set of LSPs which are
destined to the same egress 7x50 router. The LSP with the lowest
metric will be sele…
Unsigned32r/w
Constraints:
range: 0-16777215
.1.3.6.1.4.1.6527.3.1.2.6.41.1.29
The value of vRtrMplsLspTemplateSetupPriority specifies the setup
priority to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If t…
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.41.1.30
The value of vRtrMplsLspTemplateHoldPriority specifies the hold
priority to use when insufficient bandwidth is available to setup a
LSP. The setup priority is compared against the hold priority of
existing LSPs. If the…
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.41.1.31
The value of vRtrMplsLspTemplateVprnAutoBind specifies whether the LSP
can be used as part of the auto-bind feature for VPRN services. By
default a LSP is available for inclusion to be used for the auto-bind
feature.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.32
The value of vRtrMplsLspTempIgpSCutLfaType specifies whether to
exclude or include a RSVP LSP from being used as a shortcut while
resolving IGP routes in LFA SPF or whether to exclude or include a
RSVP LSP from being us…
Enumerationr/w
Enumerated Values:
0none
1lfaProtect
2lfaOnly
.1.3.6.1.4.1.6527.3.1.2.6.41.1.33
The value of vRtrMplsLspTempIgpSCutRelOffset specifies the the
relative offset to the IGP metric on the SPF tree.

The SPF tree is updated with the current IGP metric of the path
between the endpoints of t…
Integer32r/w
Constraints:
range: -10-10
range: 2147483647-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.41.1.34
The value of the vRtrMplsLspTempAutoBandwidth specifies whether
automatic bandwidth adjustment has been enabled or disabled for this
LSP template.

A value of 'true' specifies that automatic bandwidth adju…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.35
The value of vRtrMplsLspTempFRNodeProtect specifies whether node
protect has been enabled or disabled for this LSP template.

A value of 'true' specifies that node protection i.e. protection
against the fa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.36
The value of vRtrMplsLspTemplateEgrStats specifies whether egress
statistics has been enabled or disabled for this LSP template.

A value of 'true' specifies egress statistics is enabled on this LSP
templa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.37
The value of vRtrMplsLspTempCollectStats specifies whether to collect
statistics for this prefix.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.38
The value of vRtrMplsLspTempAccntingPolicy specifies the accounting
policy to be used for this entry.

A value of zero indicates that the default accounting policy should be
used.
Unsigned32r/w
Constraints:
range: 0-99
.1.3.6.1.4.1.6527.3.1.2.6.41.1.39
The value of vRtrMplsLspTemplateFromAddrType specifies the IP address
type of vRtrMplsLspTemplateFromAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.41.1.40
The vRtrMplsLspTemplateFromAddr specifies the source address of this
LSP template.

The address type of vRtrMplsLspTemplateFromAddr is specified by
vRtrMplsLspTemplateFromAddrType.

When vR…
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.41.1.41
The value of vRtrMplsLspTemplateClassType specifies the class type
(CT) associated with this LSP template.
TIMETRA-TC-MIBTmnxRsvpDSTEClassTyper/w
Type Constraints:
range: 0..7
.1.3.6.1.4.1.6527.3.1.2.6.41.1.42
The value of vRtrMplsLspTempBkupClassType specifies the backup class
type (CT) associated with this LSP template.
TIMETRA-TC-MIBTmnxRsvpDSTEClassTyper/w
Type Constraints:
range: 0..7
.1.3.6.1.4.1.6527.3.1.2.6.41.1.43
The value of vRtrMplsLspTempBgpTransportTunn specifies whether an RSVP
LSP is allowed or blocked in its usage as a transport LSP for BGP
tunnel routes.

When the value of vRtrMplsLspTempBgpTransportTunn is…
TmnxMplsLspBgpRSVPLSPTunStater/w
Type Values:
1include
2exclude
.1.3.6.1.4.1.6527.3.1.2.6.41.1.44
The value of vRtrMplsLspTempMainCTRetryLimit specifies the number of
attempts the software should make before it can start using the backup
class type.
Unsigned32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.6527.3.1.2.6.41.1.45
The value of vRtrMplsLspTemplateRsvpAdspec specifies whether or not
the ADSPEC object will be included in RSVP messages.

When the value of vRtrMplsLspTemplateRsvpAdspec is 'true', the ADSPEC
object will b…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.46
The value of vRtrMplsLspTempLoadBalancingWt specifies the load
balancing weight applied to this Labeled Switch Path(LSP) template.
When a system level load-balancing command is enabled, packets
forwarded to a set of ECM…
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6527.3.1.2.6.41.1.47
The value of vRtrMplsLspTempClassFwdEnabled specifies whether class
based forwarding over this MPLS LSP template is enabled or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.48
The value of vRtrMplsLspTempFC specifies a set of forwarding classes
configured for this LSP template expressed as a bit map. If a bit from
0 through 7 is set, then the corresponding forwarding class has been
configured…
TIMETRA-TC-MIBTmnxCBFClassesr/w
Type Values:
0be
1l2
2af
3l1
4h2
5ef
6h1
7nc
8defaultLsp
.1.3.6.1.4.1.6527.3.1.2.6.41.1.49
The value of vRtrMplsLspTempBfdTemplateName specifies the
TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by this LSP template.
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.41.1.50
The value of vRtrMplsLspTempBfdEnable specifies whether BFD is enabled
or not for this LSP template.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.51
The value of vRtrMplsLspTempBfdPingIntvl specifies the time interval
for periodic LSP ping for BFD bootstrapping.

The object vRtrMplsLspTempBfdPingIntvl is applicable to LSP templates
with vRtrMplsLspTem…
secondsUnsigned32r/w
Constraints:
range: 0-0
range: 60-300
.1.3.6.1.4.1.6527.3.1.2.6.41.1.52
The value of vRtrMplsLspTempEntropyLabel specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for this LSP template.

When the val…
Enumerationr/w
Enumerated Values:
1forceDisable
2enable
3inherit
.1.3.6.1.4.1.6527.3.1.2.6.41.1.53
The value of vRtrMplsLspTemplatePceReport specifies whether to
override the global configuration of reporting of LSP Template to PCE.

If the value of vRtrMplsLspTemplatePceReport is 'disabled' for an LSP
Enumerationr/w
Enumerated Values:
1enable
2disable
3inherit
.1.3.6.1.4.1.6527.3.1.2.6.41.1.54
The value of vRtrMplsLspTempMaxSrLabels specifies maximum segment
routing label stack size for this LSP template.

The default IXR platform is 3 and maximum value supported is 5.
Unsigned32r/w
Constraints:
range: 1-11
.1.3.6.1.4.1.6527.3.1.2.6.41.1.55
The value of vRtrMplsLspTempFrrOverheadLabel specifies maximum
additional overhead labels for this LSP template.
Unsigned32r/w
Constraints:
range: 0-4
.1.3.6.1.4.1.6527.3.1.2.6.41.1.56
The value of vRtrMplsLspTempBfdFailureAction specifies the actions to
be taken when this LSP template session fails.

When vRtrMplsLspTempBfdFailureAction is set to down, it prevents the
LSP template from …
Enumerationr/w
Enumerated Values:
0none
1down
2failoverOrDown
.1.3.6.1.4.1.6527.3.1.2.6.41.1.57
The value of vRtrMplsLspTempCbfFwdingPlcy specifies the name of the
Class Forwarding Policy for this LSP Template instance.
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.41.1.58
The value of vRtrMplsLspTempCbfFwdingSet specifies the Class
Forwarding Set ID for this LSP Template instance. If system profile is
profile-b then valid range is 0..6 else 0..4
Unsigned32r/w
Constraints:
range: 0-6
.1.3.6.1.4.1.6527.3.1.2.6.41.1.59
The value of vRtrMplsLspTemplateId specifies the identifier
for pce-init LSPs using this template are setup.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6527.3.1.2.6.41.1.60
The value of vRtrMplsLspTempPathCompMeth specifies LSP path
computation method.

If the value of vRtrMplsLspTempPathCompMeth is 'localCspf' for an LSP
the path uses local CSPF.

Enumerationr/w
Enumerated Values:
1none
2localCspf
.1.3.6.1.4.1.6527.3.1.2.6.41.1.61
The value of vRtrMplsLspTempMetricType specifies metric type.

If the value of vRtrMplsLspTempMetricType is 'igp', the metric used is
IGP.

If the value of vRtrMplsLspTempMetricType is 'te', …
Enumerationr/w
Enumerated Values:
1igp
2te
.1.3.6.1.4.1.6527.3.1.2.6.41.1.62
The value of vRtrMplsLspTempLocalSrProt specifies the local SR
protection.

If the value of vRtrMplsLspTempLocalSrProt is 'none', there is no
protection.

If the value of vRtrMplsLspTempLocal…
Enumerationr/w
Enumerated Values:
1none
2preferred
3mandatory
.1.3.6.1.4.1.6527.3.1.2.6.41.1.63
The value of vRtrMplsLspTempLabelStackRed specifies whether label
stack reduction is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.41.1.64
The value of vRtrMplsLspTempBfdUpWaitTimer specifies the time in
seconds the software will wait for BFD to come up.

The timer object is applicable only when
vRtrMplsLspTempBfdFailureAction is set to 'fai…
secondsUnsigned32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.6527.3.1.2.6.41.1.65
The value of vRtrMplsLspTempSelfPing specifies whether to override the
global configuration of Self Ping.

If the value of vRtrMplsLspTempSelfPing is 'disabled' for an LSP
template entry either due to inhe…
Enumerationr/w
Enumerated Values:
1enable
2disable
3inherit
.1.3.6.1.4.1.6527.3.1.2.6.41.1.66
The value of vRtrMplsLspTempAddrFamily specifies the address family
type used for SR-TE LSP templates.

If the value of vRtrMplsLspTempAddrFamily is 'ipv4' for an LSP
template entry is using an ipv4 addres…
Enumerationr/w
Enumerated Values:
0notApplicable
1ipv4
2ipv6
.1.3.6.1.4.1.6527.3.1.2.6.41.1.67
.1.3.6.1.4.1.6527.3.1.2.6.43 · 1 row entry · 44 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspAutoBandwidthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspAutoBandwidthTable'
The vRtrMplsLspAutoBandwidthTable has an entry for auto bandwidth
configuration for each Labeled Switch Path (LSP) configured for a
virtual router in the system.
vRtrMplsLspAutoBandwidthEntry row .1.3.6.1.4.1.6527.3.1.2.6.43.1
Each row entry represents auto bandwidth configuration for a Labeled
Switch Path (LSP) configured for a virtual router in the system.
Column Syntax OID
The value of vRtrMplsLspAutoBWLspName uniquely identifies a row in the
vRtrMplsLspAutoBandwidthTable.

If vRtrMplsLspType is not 'meshP2p' or 'oneHopP2p',
vRtrMplsLspAutoBWLspName can have a maximum of 32 …
TIMETRA-TC-MIBTLNamedItem
Type Constraints:
range: 1..64
.1.3.6.1.4.1.6527.3.1.2.6.43.1.1
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.43.1.2
The value of vRtrMplsLspAutoBWAdjDNPercent specifies minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expressed as a percentage of
the current bandwid…
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.3
The value of vRtrMplsLspAutoBWAdjDNMbps specifies the minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expressed as an absolute
bandwidth (Mbps), for …
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.43.1.4
The value of vRtrMplsLspAutoBWAdjMultiplier specifies the number of
collection intervals in the adjust interval.

The default value is derived from vRtrMplsGeneralAutoBWDefAdjMul and
vRtrMplsLspAutoBWAdjCo…
Unsigned32r/w
Constraints:
range: 1-16383
.1.3.6.1.4.1.6527.3.1.2.6.43.1.5
The value of vRtrMplsLspAutoBWAdjUPPercent specifies minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expressed as a percentage of
the current bandwid…
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.6
The value of vRtrMplsLspAutoBWAdjUPMbps specifies the minimum
difference between the current bandwidth reservation of the LSP and
the (measured) maximum average data rate, expressed as an absolute
bandwidth (Mbps), for …
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.43.1.7
The value of vRtrMplsLspAutoBWMaxBW specifies the maximum that
auto-bandwidth allocation is allowed to request for a LSP.
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.43.1.8
The value of vRtrMplsLspAutoBWMinBW specifies the minimum that
auto-bandwidth allocation is allowed to request for a LSP.
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.43.1.9
The value of vRtrMplsLspAutoBWMonitorBW specifies whether the
collection and display of auto-bandwidth measurements is enabled or
disabled for the LSP.

When the value of vRtrMplsLspAutoBWMonitorBW is 'tru…
megabpsSNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.43.1.10
The value of vRtrMplsLspAutoBWOverFlow specifies number of overflow
samples that triggers an overflow auto-bandwidth adjustment attempt.
Unsigned32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.6527.3.1.2.6.43.1.11
The value of vRtrMplsLspAutoBWOvrFlwThreshold specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the current bandwidth, for
counting an over…
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.12
The value of vRtrMplsLspAutoBWOvrFlwBW specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as an absolute bandwidth (Mbps), for counting an
overflow sample.
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.43.1.13
The value of vRtrMplsLspAutoBWSampMultiplier specifies the multiplier
for collection intervals in a sample interval.
Unsigned32r/w
Constraints:
range: 1-511
.1.3.6.1.4.1.6527.3.1.2.6.43.1.14
The value of vRtrMplsLspAutoBWSampTime indicates the sample multiplier
times the collection interval.
minutesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.15
The value of vRtrMplsLspAutoBWLastAdj indicates the system time for
the last auto-bandwidth adjustment.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.43.1.16
The value of vRtrMplsLspAutoBWLastAdjCause indicates the cause for the
last auto-bandwidth adjustment.
TmnxMplsLspAutoBWLastAdjCause
Type Values:
0none
1manual
2normal
3overflow
4vllCAC
5underflow
6activePathChange
.1.3.6.1.4.1.6527.3.1.2.6.43.1.17
The value of vRtrMplsLspAutoBWNextAdj indicates the system time when
then adjust-timer will expire.
minutesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.18
The value of vRtrMplsLspAutoBWMaxAvgRate indicates the maximum average
data rate in any sample interval of the current adjust interval.
megabpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.19
The value of vRtrMplsLspAutoBWLastAvgRate indicates the average data
rate in the sample interval that ended most recently.
megabpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.20
For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspAutoBWInheritance that controls whether
to inher…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.21
The value of vRtrMplsLspAutoBWCurrentBW indicates the current
bandwidth reserved along the primary path.
megabpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.22
The value of vRtrMplsLspAutoBWAdjTime indicates the adjust multiplier
times the collection interval.
minutesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.23
The value of vRtrMplsLspAutoBWOvrFlwCount indicates the number of
overflow samples since the last reset.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.24
The value of vRtrMplsLspAutoBWSampCount indicates the count in the
sample interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.25
The value of vRtrMplsLspAutoBWAdjCount indicates the count in the
adjust interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.26
The value of vRtrMplsLspAutoBWOperState indicates the operational
status for the LSP.
TIMETRA-TC-MIBTmnxEnabledDisabled
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.6527.3.1.2.6.43.1.27
The value of vRtrMplsLspAutoBWSampInterval indicates the number of
sample intervals.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.28
The value of vRtrMplsLspAutoBWBeWeight specifies the weight in percent
for forwarding class 'BE' for the LSP.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.29
The value of vRtrMplsLspAutoBWL2Weight specifies the weight in percent
for forwarding class 'L2' for the LSP.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.30
The value of vRtrMplsLspAutoBWAfWeight specifies the weight in percent
for forwarding class 'AF' for the LSP.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.31
The value of vRtrMplsLspAutoBWL1Weight specifies the weight in percent
for forwarding class 'L1' for the LSP.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.32
The value of vRtrMplsLspAutoBWH2Weight specifies the weight in percent
for forwarding class 'H2' for the LSP.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.33
The value of vRtrMplsLspAutoBWEfWeight specifies the weight in percent
for forwarding class 'EF' for the LSP.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.34
The value of vRtrMplsLspAutoBWH1Weight specifies the weight in percent
for forwarding class 'H1' for the LSP.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.35
The value of vRtrMplsLspAutoBWNcWeight specifies the weight in percent
for forwarding class 'NC' for the LSP.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.36
The value of vRtrMplsLspAutoBWUnderFlow specifies the number of
underflow samples that triggers an underflow auto-bandwidth adjustment
attempt.
Unsigned32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.6527.3.1.2.6.43.1.37
The value of vRtrMplsLspAutoBWUndFlwThreshold specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the current bandwidth, for
counting an unde…
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.43.1.38
The value of vRtrMplsLspAutoBWUndFlwBW specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as an absolute bandwidth (Mbps), for counting an
underflow sample.
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.43.1.39
The value of vRtrMplsLspAutoBWUndFlwCount indicates the number of
underflow samples since the last reset.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.40
The value of vRtrMplsLspAutoBWMaxUndFlwBw indicates the maximum
sampled bandwidth in the most recent consecutive underflow samples.
megabpsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.43.1.41
The value of vRtrMplsLspAutoBWUseLastAdjBW specifies whether use of
last adjusted bandwidth is enabled or diabled.

When the value is 'true' the use of last adjusted bandwidth is
enabled, and LSP paths wil…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.43.1.42
The value of vRtrMplsLspAutoBWSecRetryLimit specifies the max number
of retry attempts that will be made to signal the secondary path with
the last adjusted bandwidth. After the number of retry attempts is
exceeded, no …
Unsigned32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.6527.3.1.2.6.43.1.43
The value of vRtrMplsLspAutoBWLastAdjBW indicates the last adjusted
bandwidth for the LSP. A value of -1 indicates that this value is
invalid
megabpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6527.3.1.2.6.43.1.44
.1.3.6.1.4.1.6527.3.1.2.6.44 · 1 row entry · 22 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspPathOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspPathOperTable'
The vRtrMplsLspPathOperTable has an entry for an association between a
Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path (or
tunnel) entry in the mplsTunnelTable.
vRtrMplsLspPathOperEntry row .1.3.6.1.4.1.6527.3.1.2.6.44.1
Each row entry represents an operational status for an association
between a Labeled Switch Path (LSP) in the vRtrMplsLspTable and a path
(or tunnel) entry in the mplsTunnelTable.

Entries cannot be created …
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsLspPathOperSetupPriority indicates the setup
priority used by the operational LSP path.

When make-before-break functionality for the LSP is enabled and if the
path setup priority is c…
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.44.1.1
The value of vRtrMplsLspPathOperHoldPriority indicates the hold
priority used by the operational LSP path.

When make-before-break functionality for the LSP is enabled and if the
path hold priority is chan…
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.6527.3.1.2.6.44.1.2
The value of vRtrMplsLspPathOperRecord indicates whether the
operational LSP path is recording or not recording all the traversed
hops.

When make-before-break functionality for the LSP is enabled and if t…
Enumeration
Enumerated Values:
1record
2noRecord
.1.3.6.1.4.1.6527.3.1.2.6.44.1.3
The value of vRtrMplsLspPathOperRecordLabel indicates whether the
currently operational LSP path is recording or not recording the label
allocated at each traversed node.

When make-before-break functional…
Enumeration
Enumerated Values:
1record
2noRecord
.1.3.6.1.4.1.6527.3.1.2.6.44.1.4
The value of vRtrMplsLspPathOperHopLimit indicates the maximum hops
limit used by the currently operational LSP path.

When make-before-break functionality for the LSP is enabled and if the
hop limit is ch…
Unsigned32
Constraints:
range: 2-255
.1.3.6.1.4.1.6527.3.1.2.6.44.1.5
The value of vRtrMplsLspPathOperAdminGrpIncl is a bit-map which
indicates a list of admin groups included by the currently operational
LSP path.

When make-before-break functionality for the LSP is enabled…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.44.1.6
The value of vRtrMplsLspPathOperAdminGrExcld is a bit-map which
indicates a list of admin groups excluded by the currently operational
LSP path.

When make-before-break functionality for the LSP is enabled…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.44.1.7
The value of vRtrMplsLspPathOperCspf indicates whether the currently
operational LSP path has used CSPF computation for constrained-path
enabled or disabled.

When make-before-break functionality for the L…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.44.1.8
The value of vRtrMplsLspPathOperCspfToFrstLs indicates whether the
currently operational LSP path had CSPF to first loose hop enabled or
disabled.

When make-before-break functionality for the LSP is enabl…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.44.1.9
The value of vRtrMplsLspPathOperLeastFill indicates whether the
currently operational LSP path was computed with the least-fill path
selection method.

When make-before-break functionality for the LSP is e…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.44.1.10
The value of vRtrMplsLspPathOperRsvpAdspec indicates whether the
currently operational LSP path has ADSPEC object included in RSVP
messages or not.

When make-before-break functionality for the LSP is enab…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.44.1.11
The value of vRtrMplsLspPathOperFRNodeProtect indicates whether the
currently operational LSP path has node protection enabled or
disabled.

When make-before-break functionality for the LSP is enabled and …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.44.1.12
The value of vRtrMplsLspPathOperPropAdminGrp indicates whether the
currently operational LSP path has propagation admin groups enabled or
disabled.

When make-before-break functionality for the LSP is enab…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.44.1.13
The value of vRtrMplsLspPathOperFRHopLimit indicates the total number
of hops to be used by detour LSP before merging to currently
operational LSP path.

When make-before-break functionality for the LSP is…
Unsigned32
Constraints:
range: 0-255
.1.3.6.1.4.1.6527.3.1.2.6.44.1.14
The value of vRtrMplsLspPathOperFRPropAdmGrp indicates whether the
currently operational LSP path has propagation of admin groups in the
FAST_REROUTE object enabled or disabled.

When make-before-break fun…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.44.1.15
The value of vRtrMplsLspPathOperInterArea indicates whether the
operational LSP path is either inter-area or intra-area.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.44.1.16
The value of vRtrMplsLspPathOperCompMeth indicates the path
computation method that was used for the currently operational LSP
path.

A value of 'notApplicable' indicates that the LSP path is
operationall…
Enumeration
Enumerated Values:
0notApplicable
1none
2localCspf
3pce
.1.3.6.1.4.1.6527.3.1.2.6.44.1.17
The value of vRtrMplsLspPathOperMetricType indicates the metric type
used for the currently operational LSP path.

A value of 'notApplicable' indicates that the LSP path is
operationally down.
Enumeration
Enumerated Values:
0notApplicable
1igp
2te
.1.3.6.1.4.1.6527.3.1.2.6.44.1.18
The value of vRtrMplsLspPathOperLocalSrProt indicates the local SR
protection used for the currently operational LSP path.

A value of 'notApplicable' indicates that the LSP path is
operationally down.
Enumeration
Enumerated Values:
0notApplicable
1none
2preferred
3mandatory
.1.3.6.1.4.1.6527.3.1.2.6.44.1.19
The value of vRtrMplsLspPathOperLabelStackRed indicates whether label
stack reduction is used for the currently operational LSP path.

A value of 'notApplicable' indicates that the LSP path is
operational…
Enumeration
Enumerated Values:
0notApplicable
1true
2false
.1.3.6.1.4.1.6527.3.1.2.6.44.1.20
The vRtrMplsLspPathNgFNAddrType object is an enumerated value that
specifies the destination address type of the node in the LSP path at
which the LSP path failed.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.44.1.21
The value of vRtrMplsLspPathNgFNAddr indicates the IP address of the
node in the LSP path at which the LSP path failed.
OctetString
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.44.1.22
.1.3.6.1.4.1.6527.3.1.2.6.47 · 1 row entry · 26 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspTempAutoBWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspTempAutoBWTable'
The vRtrMplsLspTempAutoBWTable has an entry for auto bandwidth
configuration for each Labeled Switch Path (LSP) template configured
for a virtual router in the system.
vRtrMplsLspTempAutoBWEntry row .1.3.6.1.4.1.6527.3.1.2.6.47.1
Each row entry represents auto bandwidth configuration for a Labeled
Switch Path (LSP) Template configured for a virtual router in the
system.
Column Syntax OID
The value of vRtrMplsLspTempAutoBWLastChg indicates the sysUpTime when
this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.47.1.1
The value of vRtrMplsLspTempAutoBWAdjDNPer specifies minimum
difference between the current bandwidth reservation of the LSP
template and the (measured) maximum average data rate, expressed as a
percentage of the curren…
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.2
The value of vRtrMplsLspTempAutoBWAdjDNMbps specifies the minimum
difference between the current bandwidth reservation of the LSP
template and the (measured) maximum average data rate, expressed as an
absolute bandwidth…
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.47.1.3
The value of vRtrMplsLspTempAutoBWAdjUPPer specifies minimum
difference between the current bandwidth reservation of the LSP
template and the (measured) maximum average data rate, expressed as a
percentage of the curren…
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.4
The value of vRtrMplsLspTempAutoBWAdjUPMbps specifies the minimum
difference between the current bandwidth reservation of the LSP
template and the (measured) maximum average data rate, expressed as an
absolute bandwidth…
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.47.1.5
The value of vRtrMplsLspTempAutoBWMaxBW specifies the maximum that
auto-bandwidth allocation is allowed to request for a LSP template.
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.47.1.6
The value of vRtrMplsLspTempAutoBWMinBW specifies the minimum that
auto-bandwidth allocation is allowed to request for a LSP template.
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.47.1.7
The value of vRtrMplsLspTempAutoBWMntrBW specifies whether the
collection and display of auto-bandwidth measurements is enabled or
disabled for the LSP template.

When the value of vRtrMplsLspTempAutoBWMnt…
megabpsSNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.47.1.8
The value of vRtrMplsLspTempAutoBWAdjMult specifies the number of
collection intervals in the adjust interval.

The default value is derived from vRtrMplsGeneralAutoBWDefAdjMul and
vRtrMplsLspAutoBWAdjCoun…
Unsigned32r/w
Constraints:
range: 1-16383
.1.3.6.1.4.1.6527.3.1.2.6.47.1.9
The value of vRtrMplsLspTempAutoBWOverFlow specifies number of
overflow samples that triggers an overflow auto-bandwidth adjustment
attempt.
Unsigned32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.6527.3.1.2.6.47.1.10
The value of vRtrMplsLspTempAutoBWOvrFlwThr specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the current bandwidth, for
counting an overfl…
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.11
The value of vRtrMplsLspTempAutoBWOvrFlwBW specifies the minimum
difference between the current bandwidth of the LSP template and the
sampled data rate, expressed as an absolute bandwidth (Mbps), for
counting an overflo…
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.47.1.12
The value of vRtrMplsLspTempAutoBWSampMult specifies the multiplier
for collection intervals in a sample interval.
Unsigned32r/w
Constraints:
range: 1-511
.1.3.6.1.4.1.6527.3.1.2.6.47.1.13
The value of vRtrMplsLspTempAutoBWSampTime indicates the sample
multiplier times the collection interval.
minutesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.47.1.14
For each writable object in this row that can be configured to inherit
its value from the corresponding object in the vRtrMplsGeneralTable,
there is bit within vRtrMplsLspTempAutoBWInherit that controls whether
to inher…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.47.1.15
The value of vRtrMplsLspTempAutoBWBeWeight specifies the weight in
percent for forwarding class 'BE' for the LSP template.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.16
The value of vRtrMplsLspTempAutoBWL2Weight specifies the weight in
percent for forwarding class 'L2' for the LSP template.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.17
The value of vRtrMplsLspTempAutoBWAfWeight specifies the weight in
percent for forwarding class 'AF' for the LSP template.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.18
The value of vRtrMplsLspTempAutoBWL1Weight specifies the weight in
percent for forwarding class 'L1' for the LSP template.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.19
The value of vRtrMplsLspTempAutoBWH2Weight specifies the weight in
percent for forwarding class 'H2' for the LSP template.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.20
The value of vRtrMplsLspTempAutoBWEfWeight specifies the weight in
percent for forwarding class 'EF' for the LSP template.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.21
The value of vRtrMplsLspTempAutoBWH1Weight specifies the weight in
percent for forwarding class 'H1' for the LSP template.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.22
The value of vRtrMplsLspTempAutoBWNcWeight specifies the weight in
percent for forwarding class 'NC' for the LSP template.
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.23
The value of vRtrMplsLspTempAutoBWUnderFlow specifies the number of
underflow samples that trigger an underflow auto-bandwidth adjustment
attempt.
Unsigned32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.6527.3.1.2.6.47.1.24
The value of vRtrMplsLspTempAutoBWUndFlwThr specifies the minimum
difference between the current bandwidth of the LSP and the sampled
data rate, expressed as a percentage of the current bandwidth, for
counting an underf…
percentUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.6527.3.1.2.6.47.1.25
The value of vRtrMplsLspTempAutoBWUndFlwBW specifies the minimum
difference between the current bandwidth of the LSP template and the
sampled data rate, expressed as an absolute bandwidth (Mbps), for
counting an underfl…
megabpsTIMETRA-TC-MIBTmnxMplsLspBandwidthr/w
Type Constraints:
range: 0..6400000
.1.3.6.1.4.1.6527.3.1.2.6.47.1.26
.1.3.6.1.4.1.6527.3.1.2.6.49 · 1 row entry · 8 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspTemplPlcyBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspTemplPlcyBindTable'
The vRtrMplsLspTemplPlcyBindTable has an entry for each policy bound
to each Labeled Switch Path (LSP) template configured for a virtual
router in the system.
vRtrMplsLspTemplPlcyBindEntry row .1.3.6.1.4.1.6527.3.1.2.6.49.1
Each row entry represents a policy bound to a Labeled Switch Path
(LSP) Template configured for a virtual router in the system.
Column Syntax OID
The value of the object vRtrMplsLspTemplPlcyBindLastChg indicates the
value of the sysUpTime when this entry was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.49.1.1
The value of the object vRtrMplsLspTemplPlcyBindRowStat specifies the
RowStatus for Policy bound entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.49.1.2
The value of vRtrMplsLspTemplPlcyBind1 specifies the name of the first
mpls lsp template policy.

This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true.
TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w .1.3.6.1.4.1.6527.3.1.2.6.49.1.3
The value of vRtrMplsLspTemplPlcyBind2 specifies the name of the
second mpls lsp template policy.

This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true.
TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w .1.3.6.1.4.1.6527.3.1.2.6.49.1.4
The value of vRtrMplsLspTemplPlcyBind3 specifies the name of the third
mpls lsp template policy.

This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true.
TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w .1.3.6.1.4.1.6527.3.1.2.6.49.1.5
The value of vRtrMplsLspTemplPlcyBind4 specifies the name of the
fourth mpls lsp template policy.

This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true.
TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w .1.3.6.1.4.1.6527.3.1.2.6.49.1.6
The value of vRtrMplsLspTemplPlcyBind5 specifies the name of the fifth
mpls lsp template policy.

This object will be set to its default value when
vRtrMplsLspTemplPlcyBindOneHop is set to true.
TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w .1.3.6.1.4.1.6527.3.1.2.6.49.1.7
The value of vRtrMplsLspTemplPlcyBindOneHop specifies whether the
one-hop-p2p has been enabled for auto-lsp or not.

This object will be set to false when any one of the policy for mpls
lsp template is set…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.49.1.8
.1.3.6.1.4.1.6527.3.1.2.6.51 · 1 row entry · 11 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspTempInStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspTempInStatTable'
vRtrMplsLspTempInStatTable controls Ingress Statistics for Template
based Label Switched Path (LSP).
vRtrMplsLspTempInStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.51.1
A row in this table represents information about the ingress
statistics collection for Template based LSP.
Column Syntax OID
The value of vRtrMplsLspTempInStatType indicates the type of template
based Label Switched Path (LSP).
Enumeration
Enumerated Values:
0unknown
1p2p
2p2mp
.1.3.6.1.4.1.6527.3.1.2.6.51.1.1
The value of vRtrMplsLspTempInStatSndrAddrTyp indicates address type
of vRtrMplsLspTempInStatSndrAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.51.1.2
The value of vRtrMplsLspTempInStatSndrAddr indicates the sender
address.
OctetString
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.51.1.3
The value of vRtrMplsLspTempInStatLspNamePref indicates the prefix
against which to match the LSP name.
TIMETRA-TC-MIBTLNamedItem
Type Constraints:
range: 1..64
.1.3.6.1.4.1.6527.3.1.2.6.51.1.4
vRtrMplsLspTempInStatRowStatus is used for the creation or deletion of
entries in the vRtrMplsLspTempInStatTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.51.1.5
The value of vRtrMplsLspTempInStatLastChanged indicates the time stamp
of the last change to this row of this table.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.51.1.6
The value of vRtrMplsLspTempInStatCollectStat specifies whether to
collect statistics for this prefix.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.51.1.7
The value of vRtrMplsLspTempInStatAccntPolicy specifies the accounting
policy to be used for this entry.

A value of zero indicates that the default accounting policy should be
used.
Unsigned32r/w
Constraints:
range: 0-99
.1.3.6.1.4.1.6527.3.1.2.6.51.1.8
The value of vRtrMplsLspTempInStatAdminState specifies whether ingress
statistics is enabled for this Label Switched Path (LSP) template.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.51.1.9
The value of vRtrMplsLspTempInStatMaxStats specifies the maximum
number of stat indices assigned to this Label Switched Path (LSP)
template session.
Unsigned32r/w
Constraints:
range: 1-8191
.1.3.6.1.4.1.6527.3.1.2.6.51.1.10
The value of vRtrMplsLspTempInStatTotlSession indicates the total
number of sessions associated with this Label Switched Path (LSP)
template statistics.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.51.1.11
.1.3.6.1.4.1.6527.3.1.2.6.52 · 1 row entry · 19 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspExtTable'
The vRtrMplsLspTable has an entry for each Labeled Switch Path (LSP)
configured for a virtual router in the system. This table augments the
vRtrMplsLspTable.
vRtrMplsLspExtEntry row .1.3.6.1.4.1.6527.3.1.2.6.52.1
Each row entry represents a Labeled Switch Path (LSP) configured
for a virtual router in the system. Entries can be created and
deleted via SNMP SET operations. Each row entry represents a Labeled
Switch Path (LSP) co…
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsLspExtPceCompute specifies whether the LSP path
computation request is sent to local CSPF or to PCE. When the value of
this object is 'true', the LSP makes a request to PCE to compute the
path. When…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.52.1.1
The value of vRtrMplsLspExtPceControl specifies whether the control of
path (delegation) to Path Computation Engine (PCE). Path delegation
can be done on locally computed paths and paths computed using PCE.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.52.1.2
The value of vRtrMplsLspExtPceReport specifies whether to override the
global configuration of reporting of LSP to PCE.

If the value of vRtrMplsLspExtPceReport is 'disabled' for an LSP
either due to inher…
Enumerationr/w
Enumerated Values:
1enable
2disable
3inherit
.1.3.6.1.4.1.6527.3.1.2.6.52.1.3
The value of vRtrMplsLspExtTtmTunnelId indicates the tunnel id sent to
TTM for Segment Routing Tunnels on this SROS system.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.52.1.4
The value of vRtrMplsLspExtMaxSrLabels specifies maximum segment
routing label stack size for this LSP.

The default IXR platform is 3 and maximum value supported is 5.
Unsigned32r/w
Constraints:
range: 1-11
.1.3.6.1.4.1.6527.3.1.2.6.52.1.5
The value of vRtrMplsLspExtTunnelId indicates the tunnel id used to
uniquely identify tunnels on this SROS system.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.52.1.6
The value of vRtrMplsLspExtEntropyLabel specifies whether the
application takes into account the value of Entropy Label and Entropy
Label Capability in the label stack for this LSP.

When the value of vRtr…
Enumerationr/w
Enumerated Values:
1forceDisable
2enable
3inherit
.1.3.6.1.4.1.6527.3.1.2.6.52.1.7
The value of vRtrMplsLspExtOperEntropyLabel indicates the operational
value of Entropy Label for this LSP.

When the value of vRtrMplsLspExtOperEntropyLabel is modified, Entropy
Label will become operation…
Enumeration
Enumerated Values:
1forceDisable
2enable
.1.3.6.1.4.1.6527.3.1.2.6.52.1.8
The value of vRtrMplsLspExtFrrOverheadLabel specifies maximum
additional overhead labels for this LSP.
Unsigned32r/w
Constraints:
range: 0-4
.1.3.6.1.4.1.6527.3.1.2.6.52.1.9
The value of vRtrMplsLspExtNegEntropyLbl indicates the combination of
Entropy Label configured at head end for this LSP and the Entropy
Label Capability signalled from the far end.
Enumeration
Enumerated Values:
1forceDisable
2enable
.1.3.6.1.4.1.6527.3.1.2.6.52.1.10
The value of vRtrMplsLspExtBfdFailureAction specifies the actions to
be taken when this LSP BFD session fails.

When vRtrMplsLspExtBfdFailureAction is set to down, it prevents the
LSP from being made avail…
Enumerationr/w
Enumerated Values:
0none
1down
2failover
3failoverOrDown
.1.3.6.1.4.1.6527.3.1.2.6.52.1.11
The value of vRtrMplsLspExtCbfFwdingPlcy specifies the name of the
Class Forwarding Policy for this LSP instance.
TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
.1.3.6.1.4.1.6527.3.1.2.6.52.1.12
The value of vRtrMplsLspExtCbfFwdingSet specifies the Class Forwarding
Set ID for this LSP instance. If system profile is profile-b then
valid range is 0..6 else 0..4
Unsigned32r/w
Constraints:
range: 0-6
.1.3.6.1.4.1.6527.3.1.2.6.52.1.13
The value of vRtrMplsLspExtPathCompMeth specifies LSP path
computation method.

If the value of vRtrMplsLspExtPathCompMeth is 'localCspf' for an LSP
the path uses local CSPF.

If the value of…
Enumerationr/w
Enumerated Values:
1none
2localCspf
3pce
.1.3.6.1.4.1.6527.3.1.2.6.52.1.14
The value of vRtrMplsLspExtMetricType specifies metric type.

If the value of vRtrMplsLspExtMetricType is 'igp', the metric used is
IGP.

If the value of vRtrMplsLspExtMetricType is 'te', the…
Enumerationr/w
Enumerated Values:
1igp
2te
.1.3.6.1.4.1.6527.3.1.2.6.52.1.15
The value of vRtrMplsLspExtLocalSrProt specifies the local SR
protection.

If the value of vRtrMplsLspExtLocalSrProt is 'none', there is no
protection.

If the value of vRtrMplsLspExtLocalSrP…
Enumerationr/w
Enumerated Values:
1none
2preferred
3mandatory
.1.3.6.1.4.1.6527.3.1.2.6.52.1.16
The value of vRtrMplsLspExtLabelStackRed specifies whether label stack
reduction is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.52.1.17
The value of vRtrMplsLspExtBfdUpWaitTimer specifies the time in
seconds the software will wait for BFD to come up.

The timer object is applicable only when
vRtrMplsLspExtBfdFailureAction is set to 'failo…
secondsUnsigned32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.6527.3.1.2.6.52.1.18
The value of vRtrMplsLspExtSelfPing specifies whether to override the
global configuration of Self Ping.

If the value of vRtrMplsLspExtSelfPing is 'disabled' for an LSP either
due to inheritance or due to…
Enumerationr/w
Enumerated Values:
1enable
2disable
3inherit
.1.3.6.1.4.1.6527.3.1.2.6.52.1.19
.1.3.6.1.4.1.6527.3.1.2.6.54 · 1 row entry · 4 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspPathProfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspPathProfTable'
The vRtrMplsLspPathProfTable has an entry for each Labeled Switch Path
(LSP) configured for a virtual router in the system.
vRtrMplsLspPathProfEntry row .1.3.6.1.4.1.6527.3.1.2.6.54.1
Each row entry represents a Labeled Switch Path (LSP) configured
for a virtual router in the system. Entries can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsLspPathPr…
Column Syntax OID
The value of vRtrMplsLspPathProfId specifies the profile id of for the
specified LSP.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6527.3.1.2.6.54.1.1
The row status used for creation, deletion, or control
of vRtrMplsLspPathProfTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspName must
have been assigned a valid value.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.54.1.2
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.54.1.3
The value of vRtrMplsLspPathProfGroupId specifies the group id used by
the path profile for the specified LSP.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6527.3.1.2.6.54.1.4
.1.3.6.1.4.1.6527.3.1.2.6.56 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsClassFwdPlcyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsClassFwdPlcyTable'
The vRtrMplsClassFwdPlcyTable has an entry for each Forwarding Class
Policy configured for a virtual router in the system.
vRtrMplsClassFwdPlcyEntry row .1.3.6.1.4.1.6527.3.1.2.6.56.1
Each row entry represents a configuration of a Forwarding Class Policy
in the MPLS protocol for a virtual router in the system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsClassFwdPlcyName specifies the name for the class
forwarding policy.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.56.1.1
The value of vRtrMplsClassFwdPlcyRowStatus controls the creation and
deletion of rows in the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.56.1.2
The value of vRtrMplsClassFwdPlcyLastChanged indicates the sysUpTime
when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.56.1.3
The value of vRtrMplsClassFwdPlcyDefSetId specifies default forwarding
set ID when no forwarding class is specified for Lsp or Lsp Template
instance. If system profile is profile-b then valid range is 1..6 else
1..4
Unsigned32r/w
Constraints:
range: 1-6
.1.3.6.1.4.1.6527.3.1.2.6.56.1.4
The value of vRtrMplsClassFwdPlcyRefCount indicates the number of LSPs
or LSP templates that are referencing this class forwarding policy.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.56.1.5
.1.3.6.1.4.1.6527.3.1.2.6.58 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsClassFwdPlcyFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsClassFwdPlcyFCTable'
The vRtrMplsClassFwdPlcyFCTable has an entry for each type of
Forwarding Class and its corresponding forwarding set id.
vRtrMplsClassFwdPlcyFCEntry row .1.3.6.1.4.1.6527.3.1.2.6.58.1
Each row entry represents a configuration of a Forwarding Class and
forwarding set id in the MPLS protocol for a virtual router in the
system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsClassFwdPlcyFC specifies the name of the
forwarding class assigned to the policy name specified by
vRtrMplsClassFwdPlcyName.
TIMETRA-TC-MIBTFCType
Type Values:
0be
1l2
2af
3l1
4h2
5ef
6h1
7nc
.1.3.6.1.4.1.6527.3.1.2.6.58.1.1
The value of vRtrMplsClassFwdPlcyFCSetId specifies the forwarding set
ID to which forwarding class specified by vRtrMplsClassFwdPlcyFC is
mapped to. If system profile is profile-b then valid range is 1..6
else 1..4
Unsigned32r/w
Constraints:
range: 1-6
.1.3.6.1.4.1.6527.3.1.2.6.58.1.2
.1.3.6.1.4.1.6527.3.1.2.6.60 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsReservedLblBlkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsReservedLblBlkTable'
The vRtrMplsReservedLblBlkTable has an entry for each reserved label
block.
vRtrMplsReservedLblBlkEntry row .1.3.6.1.4.1.6527.3.1.2.6.60.1
Each row entry represents a configuration of a reserved label block in
the MPLS protocol for a virtual router in the system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsReservedLblBlkName specifies the name identifying
the reserved label block.
TIMETRA-TC-MIBTLNamedItem
Type Constraints:
range: 1..64
.1.3.6.1.4.1.6527.3.1.2.6.60.1.1
The row status used for creation, deletion, or control of
vRtrMplsReservedLblBlkTable entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.60.1.2
The value of vRtrMplsReservedLblBlkLastChg indicates the sysUpTime
when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.60.1.3
The value of vRtrMplsReservedLblBlkStartLbl specifies the start value
of the reserved label available on the system.

vRtrMplsReservedLblBlkStartLbl must be set along with
vRtrMplsReservedLblBlkEndLbl.
TIMETRA-TC-MIBTmnxMplsLabelOrZeror/w
Type Constraints:
range: 0
range: 32..1048575
.1.3.6.1.4.1.6527.3.1.2.6.60.1.4
The value of vRtrMplsReservedLblBlkEndLbl specifies the end value of
the reserved label available on the system.

vRtrMplsReservedLblBlkEndLbl must be set along with
vRtrMplsReservedLblBlkStartLbl.
TIMETRA-TC-MIBTmnxMplsLabelOrZeror/w
Type Constraints:
range: 0
range: 32..1048575
.1.3.6.1.4.1.6527.3.1.2.6.60.1.5
.1.3.6.1.4.1.6527.3.1.2.6.62 · 1 row entry · 3 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspAdminTagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspAdminTagTable'
The vRtrMplsLspAdminTagTable has an entry for each admin-tag
configured in the system.
vRtrMplsLspAdminTagEntry row .1.3.6.1.4.1.6527.3.1.2.6.62.1
Each row entry represents a configuration of an admin-tag name in LSP
for a virtual router in the system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsLspAdminTagName specifies the name of the admin
tag.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.62.1.1
The row status used for creation, deletion, or control of
vRtrMplsLspAdminTagTable entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.62.1.2
The value of vRtrMplsLspAdminTagLastChanged indicates the sysUpTime
when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.62.1.3
.1.3.6.1.4.1.6527.3.1.2.6.64 · 1 row entry · 3 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspTempAdminTagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspTempAdminTagTable'
The vRtrMplsLspTempAdminTagTable has an entry for each admin-tag
configured in the system.
vRtrMplsLspTempAdminTagEntry row .1.3.6.1.4.1.6527.3.1.2.6.64.1
Each row entry represents a configuration of an admin-tag name in LSP
for a virtual router in the system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsLspTempAdminTagName specifies the name of the
admin tag.
TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
.1.3.6.1.4.1.6527.3.1.2.6.64.1.1
The row status used for creation, deletion, or control of
vRtrMplsLspTempAdminTagTable entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.64.1.2
The value of vRtrMplsLspTempAdminTagLastChg indicates the sysUpTime
when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.64.1.3
.1.3.6.1.4.1.6527.3.1.2.6.66 · 1 row entry · 12 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsFwdPlcyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsFwdPlcyTable'
The vRtrMplsFwdPlcyTable has an entry for each Forwarding Policy
configured for a virtual router in the system.
vRtrMplsFwdPlcyEntry row .1.3.6.1.4.1.6527.3.1.2.6.66.1
Each row entry represents a configuration of a Forwarding Policy in
the MPLS protocol for a virtual router in the system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of the vRtrMplsFwdPlcyName specifies the name for the
forwarding policy.
TIMETRA-TC-MIBTLNamedItem
Type Constraints:
range: 1..64
.1.3.6.1.4.1.6527.3.1.2.6.66.1.1
The value of vRtrMplsFwdPlcyRowStatus controls the creation and
deletion of rows in the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.66.1.2
The value of vRtrMplsFwdPlcyLastChanged indicates the sysUpTime when
this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.66.1.3
The value of vRtrMplsFwdPlcyAdminState specifies the current
administrative state of the forwarding policy.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.66.1.4
The value of vRtrMplsFwdPlcyOperState indicates the current
operational state of the forwarding policy.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.66.1.5
The value of vRtrMplsFwdPlcyBindingLabel specifies the binding label
for the forwarding policy.
TIMETRA-TC-MIBTmnxMplsLabelOrZeror/w
Type Constraints:
range: 0
range: 32..1048575
.1.3.6.1.4.1.6527.3.1.2.6.66.1.6
The value of vRtrMplsFwdPlcyEndpointAddrType specifies the type of
vRtrMplsFwdPlcyEndpointAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.66.1.7
The value of vRtrMplsFwdPlcyEndpointAddr specifies the endpoint
address for the forwarding policy.
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.66.1.8
The value of vRtrMplsFwdPlcyRevertTimer specifies the revert timer for
the forwarding policy.
secondsUnsigned32r/w
Constraints:
range: 0-600
.1.3.6.1.4.1.6527.3.1.2.6.66.1.9
The value of vRtrMplsFwdPlcyPreference specifies the forwarding policy
preference number.
Unsigned32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.6527.3.1.2.6.66.1.10
This value of vRtrMplsFwdPlcyMetric specifies the metric of this
tunnel in the tunnel table.
Unsigned32r/w
Constraints:
range: 0-16777215
.1.3.6.1.4.1.6527.3.1.2.6.66.1.11
This value of vRtrMplsFwdPlcyTtmPreference specifies the preference of
this tunnel in the tunnel table.
Unsigned32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.6527.3.1.2.6.66.1.12
.1.3.6.1.4.1.6527.3.1.2.6.68 · 1 row entry · 7 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsFwdPlcyNHGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsFwdPlcyNHGrpTable'
The vRtrMplsFwdPlcyNHGrpTable has an entry for each Forwarding Policy
next-hop group configured for a virtual router in the system.
vRtrMplsFwdPlcyNHGrpEntry row .1.3.6.1.4.1.6527.3.1.2.6.68.1
Each row entry represents a configuration of a Forwarding Policy
next-hop group in the MPLS protocol for a virtual router in the
system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of the vRtrMplsFwdPlcyNHGrpIdx specifies the index for the
next-hop group.
Unsigned32
Constraints:
range: 1-32
.1.3.6.1.4.1.6527.3.1.2.6.68.1.1
The value of vRtrMplsFwdPlcyNHGrpRowStatus controls the creation and
deletion of rows in the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.68.1.2
The value of vRtrMplsFwdPlcyNHGrpLastChanged indicates the sysUpTime
when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.68.1.3
The value of vRtrMplsFwdPlcyNHGrpAdminState specifies the current
administrative state of the next-hop group.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.68.1.4
The value of vRtrMplsFwdPlcyNHGrpOperState indicates the current
operational state of the next-hop group.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.68.1.5
The value of vRtrMplsFwdPlcyNHGrpResType specifies the resolution
type of the next-hop group.

When the value of vRtrMplsFwdPlcyNHGrpResType is set to 'direct', the
next-hops in this group must resolve to …
Enumerationr/w
Enumerated Values:
1direct
2indirect
.1.3.6.1.4.1.6527.3.1.2.6.68.1.6
The value of vRtrMplsFwdPlcyNHGrpLoadBalWt specifies the load
balancing weight for this next-hop group.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6527.3.1.2.6.68.1.7
.1.3.6.1.4.1.6527.3.1.2.6.70 · 1 row entry · 6 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsFwdPlcyNhgNHTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsFwdPlcyNhgNHTable'
The vRtrMplsFwdPlcyNhgNHTable has an entry for each next-hop
configured in a Forwarding Policy next-hop group.
vRtrMplsFwdPlcyNhgNHEntry row .1.3.6.1.4.1.6527.3.1.2.6.70.1
Each row entry represents a configuration of a next-hop in a
Forwarding Policy next-hop group.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsFwdPlcyNhgNHType specifies the type of next-hop.

When the value of vRtrMplsFwdPlcyNhgNHType is set to 'primary', this
next-hop will be the primary next-hop in the next-hop group.
Enumeration
Enumerated Values:
1primary
2backup
.1.3.6.1.4.1.6527.3.1.2.6.70.1.1
The value of vRtrMplsFwdPlcyNhgNHRowStatus controls the creation and
deletion of rows in the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.70.1.2
The value of vRtrMplsFwdPlcyNhgNHLastChanged indicates the sysUpTime
when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.70.1.3
The value of vRtrMplsFwdPlcyNhgNHOperState indicates the current
operational state of the next-hop.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.70.1.4
The value of vRtrMplsFwdPlcyNhgNHAddrType specifies the type of
vRtrMplsFwdPlcyNhgNHAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.70.1.5
The value of vRtrMplsFwdPlcyNhgNHAddr specifies the next-hop address.
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.70.1.6
.1.3.6.1.4.1.6527.3.1.2.6.72 · 1 row entry · 6 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsFwdPlcyGenTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsFwdPlcyGenTable'
The vRtrMplsFwdPlcyGenTable contains objects for general control and
management of MPLS Forwarding Policies within a virtual router.
vRtrMplsFwdPlcyGenEntry row .1.3.6.1.4.1.6527.3.1.2.6.72.1
Each row entry contains objects for general control and management of
MPLS Forwarding Policies within a virtual router.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsFwdPlcyGenRowStatus controls the creation and
deletion of rows in the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.72.1.1
The value of vRtrMplsFwdPlcyGenLastChanged indicates the sysUpTime
when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.72.1.2
The value of vRtrMplsFwdPlcyGenAdminState specifies the current
administrative state for Forwarding Policies configuration.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.72.1.3
The value of vRtrMplsFwdPlcyGenOperState indicates the current
operational state of Forwarding Policies.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.72.1.4
The value of vRtrMplsFwdPlcyGenOperDownReason indicates the reason due
to which Forwarding Policies is operationally down.
Enumeration
Enumerated Values:
0notApplicable
1adminDown
2mplsOperDown
.1.3.6.1.4.1.6527.3.1.2.6.72.1.5
The value of vRtrMplsFwdPlcyGenReservedLblBlk identifies the reserved
label block used by Forwarding Policies.
TIMETRA-TC-MIBTLNamedItemOrEmptyr/w
Type Constraints:
range: 0..64
.1.3.6.1.4.1.6527.3.1.2.6.72.1.6
.1.3.6.1.4.1.6527.3.1.2.6.74 · 1 row entry · 4 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsFwdPlcyStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsFwdPlcyStatsTable'
The vRtrMplsFwdPlcyStatsTable contains objects for general control and
management of Statistics for MPLS Forwarding Policies within a
virtual router.
vRtrMplsFwdPlcyStatsEntry row .1.3.6.1.4.1.6527.3.1.2.6.74.1
Each row entry contains objects for general control and management of
Statistics for MPLS Forwarding Policies within a virtual router.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsFwdPlcyStatsType specifies whether the type of
statistics is ingress or egress.
Enumeration
Enumerated Values:
1ingress
2egress
.1.3.6.1.4.1.6527.3.1.2.6.74.1.1
The value of vRtrMplsFwdPlcyStatsRowStatus controls the creation and
deletion of rows in the table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.74.1.2
The value of vRtrMplsFwdPlcyStatsLastChanged indicates the sysUpTime
when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.74.1.3
The value of vRtrMplsFwdPlcyStatsAdminState specifies the current
administrative state for Forwarding Policy statistics configuration.
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.74.1.4
.1.3.6.1.4.1.6527.3.1.2.6.75 · 1 row entry · 16 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsBindLblPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsBindLblPathTable'
The vRtrMplsBindLblPathTable has an entry for each forwarding path
associated with a binding label for a virtual router in the system.
vRtrMplsBindLblPathEntry row .1.3.6.1.4.1.6527.3.1.2.6.75.1
Each row entry represents a forwarding path associated with a binding
label.

Entries cannot be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsBindLbl specifies the binding label for the
forwarding path.
TIMETRA-TC-MIBTmnxMplsLabel
Type Constraints:
range: 32..1048575
.1.3.6.1.4.1.6527.3.1.2.6.75.1.1
The value of vRtrMplsBindLblPathId specifies the path ID for the
forwarding path. Path ID will be unique amongst path associated with
the same binding label.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.75.1.2
The value of vRtrMplsBindLblPathOwner indicates the owner for this
path.
Enumeration
Enumerated Values:
1mplsFwdPlcy
.1.3.6.1.4.1.6527.3.1.2.6.75.1.3
The value of vRtrMplsBindLblPathName indicates the name for this path.
TIMETRA-TC-MIBTLNamedItem
Type Constraints:
range: 1..64
.1.3.6.1.4.1.6527.3.1.2.6.75.1.4
The value of vRtrMplsBindLblPathOperState indicates the operational
state for this path.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.75.1.5
The value of vRtrMplsBindLblPathLastOperChg indicates the timestamp
when the operational state last changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.75.1.6
The value of vRtrMplsBindLblOperDownReason indicates the reason for
the path being operationally down.
Enumeration
Enumerated Values:
0notApplicable
1memAllocFailed
2invEndPointAddr
3invBindingLbl
4duplicatePlcy
5invalidNextHop
6iomPgmFailed
7backpressured
8higherPrefPlcyPgmed
9lblNotAvailable
10statsAllocFailed
11maxPlcyExceeded
.1.3.6.1.4.1.6527.3.1.2.6.75.1.7
The value of vRtrMplsBindLblPathNumNHGrpCnt indicates the number of
next-hop groups for this path.
Unsigned32
Constraints:
range: 0-32
.1.3.6.1.4.1.6527.3.1.2.6.75.1.8
The value of vRtrMplsBindLblPathRetryCount indicates the number of
retry attempts to bring up this path.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.75.1.9
The value of vRtrMplsBindLblPathRetryTimeRem indicates the time
remaining till the next retry to bring up this path.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.75.1.10
The value of vRtrMplsBindLblPathRevertTimer indicates the revert timer
for the path.
minutesUnsigned32
Constraints:
range: 0-600
.1.3.6.1.4.1.6527.3.1.2.6.75.1.11
The value of vRtrMplsBindLblPathIngStatsEnabl indicates whether
ingress statistics are enabled for this path.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.75.1.12
The value of vRtrMplsBindLblPathPref indicates the preference for this
path.
Unsigned32
Constraints:
range: 1-255
.1.3.6.1.4.1.6527.3.1.2.6.75.1.13
The value of vRtrMplsBLPathIngStatOperState indicates the operational
state of ingress statistics for this path.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.75.1.14
The value of vRtrMplsBindLblPathEgrStatsEnabl indicates whether egress
statistics are enabled for this path.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.75.1.15
The value of vRtrMplsBLPathEgrStatOperState indicates the operational
state of egress statistics for this path.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.75.1.16
.1.3.6.1.4.1.6527.3.1.2.6.76 · 1 row entry · 9 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsBindLblPathNhgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsBindLblPathNhgTable'
The vRtrMplsBindLblPathNhgTable has an entry for each  next-hop group
associated with a binding label path.
vRtrMplsBindLblPathNhgEntry row .1.3.6.1.4.1.6527.3.1.2.6.76.1
Each row entry represents a next-hop group associated with a binding
label path.

Entries cannot be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsBindLblPathNhgIndex indicates the next-hop group
index.
Unsigned32
Constraints:
range: 1-32
.1.3.6.1.4.1.6527.3.1.2.6.76.1.1
The value of vRtrMplsBindLblPathNhgOperState indicates the operational
state of this next-hop group.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.76.1.2
The value of vRtrMplsBindLblPathNHgResType indicates the resolution
type of next-hop group.

When the value of vRtrMplsBindLblPathNHgResType is 'direct', the
next-hops in this group must resolve to direct …
Enumeration
Enumerated Values:
1direct
2indirect
.1.3.6.1.4.1.6527.3.1.2.6.76.1.3
The value of vRtrMplsBindLblPathNhgLoadBalWt indicates the
load-balancing weight for this next-hop group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.76.1.4
The value of vRtrMplsBindLblPathNhgFailovrCnt indicates the number of
failovers from primary to backup next-hop for this next-hop group
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.76.1.5
The value of vRtrMplsBindLblPathNhgRevertCnt indicates the number of
reverts from backup to primary next-hop for this next-hop group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.76.1.6
The value of vRtrMplsBindLblPathNhgRevTimeRem indicates the time
remaining to revert from backup to primary next-hop.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.76.1.7
The value of vRtrMplsBindLblPathNhgDownReason indicates the reason for
the path NHG being operationally down.
Enumeration
Enumerated Values:
0notApplicable
1nextHopNotResolved
3nextHopIsLocal
4nextHopIsMcast
5resTypeMismatch
.1.3.6.1.4.1.6527.3.1.2.6.76.1.8
The value of vRtrMplsBindLblPathNhgWeights indicates the weights for
the path next hop group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.76.1.9
.1.3.6.1.4.1.6527.3.1.2.6.77 · 1 row entry · 7 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsBindLblPathNhgNHTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsBindLblPathNhgNHTable'
The vRtrMplsBindLblPathNhgNHTable has an entry for each next-hop in a
next-hop group associated with a binding  label path.
vRtrMplsBindLblPathNhgNHEntry row .1.3.6.1.4.1.6527.3.1.2.6.77.1
Each row entry represents a next-hop for a next-hop group associated
with a binding label path.

Entries cannot be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsBindLblPathNhgNHType specifies the type of
next-hop.

When the value of vRtrMplsBindLblPathNhgNHType is set to 'primary',
this next-hop will be the primary next-hop in the next-hop gro…
Enumeration
Enumerated Values:
1primary
2backup
.1.3.6.1.4.1.6527.3.1.2.6.77.1.1
The value of vRtrMplsBindLblPathNhgNHAddrType indicates the address
type of the next-hop.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.77.1.2
The value of vRtrMplsBindLblPathNhgNHAddr indicates the address of the
next-hop.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.77.1.3
The value of vRtrMplsBindLblPathNhgNHResolved indicates if next-hop is
resolved or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.77.1.4
The value of vRtrMplsBindLblPathNhgNHOutIf indicates the index of the
outgoing interface that the next-hop resolved to if it is a direct
next-hop.

A value of 0 indicates that either the next-hop is not re…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6527.3.1.2.6.77.1.5
The value of vRtrMplsBindLblPathNhgNHDownCode indicates the reason for
the path NHG NH being not resolved.
Enumeration
Enumerated Values:
0notApplicable
1nextHopNotResolved
3nextHopIsLocal
4nextHopIsMcast
5resTypeMismatch
.1.3.6.1.4.1.6527.3.1.2.6.77.1.6
The value of vRtrMplsBindLblPathNhgNHEgrOper indicates the operational
state of the egress stats in this next-hop group next hop.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.77.1.7
.1.3.6.1.4.1.6527.3.1.2.6.78 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsBindLblIngrStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsBindLblIngrStatsTable'
The vRtrMplsBindLblIngrStatsTable has an entry for ingress statistics
associated with a binding label path.
vRtrMplsBindLblIngrStatsEntry row .1.3.6.1.4.1.6527.3.1.2.6.78.1
Each row entry represents ingress statistics collected for a binding
label path.

Entries cannot be created and deleted via SNMP SET operations.
Column Syntax OID
The total of number of ingress packets for this binding label path.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.78.1.1
The total of number of ingress octets for this binding label path..
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.78.1.2
.1.3.6.1.4.1.6527.3.1.2.6.79 · 1 row entry · 17 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsEndptPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsEndptPathTable'
The vRtrMplsEndptPathTable has an entry for each forwarding path
associated with an endpoint address for a virtual router in the
system.
vRtrMplsEndptPathEntry row .1.3.6.1.4.1.6527.3.1.2.6.79.1
Each row entry represents a forwarding path associated with an
endpoint path.

Entries cannot be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsEndptAddrType indicates the address type of the
endpoint.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.79.1.1
The value of vRtrMplsEndptAddress indicates the address of the
endpoint.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.79.1.2
The value of vRtrMplsEndptPathId indicates the path ID for the
forwarding path. Path ID will be unique amongst path associated with
the same endpoint address.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.79.1.3
The value of vRtrMplsEndptPathOwner indicates the owner for this path.
Enumeration
Enumerated Values:
1mplsFwdPlcy
.1.3.6.1.4.1.6527.3.1.2.6.79.1.4
The value of vRtrMplsEndptPathName indicates the name for this path.
TIMETRA-TC-MIBTLNamedItem
Type Constraints:
range: 1..64
.1.3.6.1.4.1.6527.3.1.2.6.79.1.5
The value of vRtrMplsEndptPathOperState indicates the operational
state for this path.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.79.1.6
The value of vRtrMplsEndptPathLastOperChg indicates the timestamp when
the operational state last changed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.79.1.7
The value of vRtrMplsEndptPathOperDownReason indicates the reason for
the path being operationally down.
Enumeration
Enumerated Values:
0notApplicable
1memAllocFailed
2invEndPointAddr
3duplicatePlcy
4invalidNextHop
5iomPgmFailed
6backpressured
7higherPrefPlcyPgmed
8statsAllocFailed
9maxPlcyExceeded
10noNextHops
.1.3.6.1.4.1.6527.3.1.2.6.79.1.8
The value of vRtrMplsEndptPathNHGrpCnt indicates the number of
next-hop groups for this path.
Unsigned32
Constraints:
range: 0-32
.1.3.6.1.4.1.6527.3.1.2.6.79.1.9
The value of vRtrMplsEndptPathRetryCount indicates the number of retry
attempts to bring up this path.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.79.1.10
The value of vRtrMplsEndptPathRetryTimeRem indicates the time
remaining till the next retry to bring up this path.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.79.1.11
The value of vRtrMplsEndptPathRevertTimer indicates the revert timer
for the path.
minutesUnsigned32
Constraints:
range: 0-600
.1.3.6.1.4.1.6527.3.1.2.6.79.1.12
The value of vRtrMplsEndptPathPref indicates the preference for this
path.
Unsigned32
Constraints:
range: 1-255
.1.3.6.1.4.1.6527.3.1.2.6.79.1.13
The value of vRtrMplsEndptPathTTMPref indicates the TTM preference for
endpoint config.
Unsigned32
Constraints:
range: 1-255
.1.3.6.1.4.1.6527.3.1.2.6.79.1.14
This value of vRtrMplsEndptPathMetric indicates the metric for
endpoint config.
Unsigned32
Constraints:
range: 0-16777215
.1.3.6.1.4.1.6527.3.1.2.6.79.1.15
The value of vRtrMplsEndptPathEgrStatsEnabl indicates whether egress
statistics are enabled for endpoint config.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.79.1.16
The value of vRtrMplsEndptPathEgrStatsOper indicates the operational
state of egress statistics for endpoint config.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.79.1.17
.1.3.6.1.4.1.6527.3.1.2.6.80 · 1 row entry · 9 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsEndptPathNhgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsEndptPathNhgTable'
The vRtrMplsEndptPathNhgTable has an entry for each next-hop group
associated with an endpoint path.
vRtrMplsEndptPathNhgEntry row .1.3.6.1.4.1.6527.3.1.2.6.80.1
Each row entry represents a next-hop group associated with an endpoint
path.

Entries cannot be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsEndptPathNhgIndex indicates the next-hop group
index.
Unsigned32
Constraints:
range: 1-32
.1.3.6.1.4.1.6527.3.1.2.6.80.1.1
The value of vRtrMplsEndptPathNhgOperState indicates the operational
state of this next-hop group.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.80.1.2
The value of vRtrMplsEndptPathNhgResType indicates the resolution type
of next-hop group.

When the value of vRtrMplsEndptPathNhgResType is 'direct', the
next-hops in this group must resolve to direct rout…
Enumeration
Enumerated Values:
1direct
2indirect
.1.3.6.1.4.1.6527.3.1.2.6.80.1.3
The value of vRtrMplsEndptPathNhgLoadBalWt indicates the
load-balancing weight for this next-hop group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.80.1.4
The value of vRtrMplsEndptPathNhgFailovrCnt indicates the number of
failovers from primary to backup next-hop for this next-hop group
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.80.1.5
The value of vRtrMplsEndptPathNhgRevertCnt indicates the number of
reverts from backup to primary next-hop for this next-hop group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.80.1.6
The value of vRtrMplsEndptPathNhgRevTimeRem indicates the time
remaining to revert from backup to primary next-hop.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.80.1.7
The value of vRtrMplsEndptPathNhgDownReason indicates the reason for
the path NHG being operationally down.
TIMETRA-TC-MIBTmnxNhgDownReason
Type Values:
0notApplicable
1nextHopNotResolved
3nextHopIsLocal
4nextHopIsMcast
5resTypeMismatch
.1.3.6.1.4.1.6527.3.1.2.6.80.1.8
The value of vRtrMplsEndptPathNhgWeights indicates the weights for the
path next hop group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.80.1.9
.1.3.6.1.4.1.6527.3.1.2.6.81 · 1 row entry · 7 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsEndptPathNhgNHTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsEndptPathNhgNHTable'
The vRtrMplsEndptPathNhgNHTable has an entry for each next-hop in a
next-hop group associated with an endpoint path.
vRtrMplsEndptPathNhgNHEntry row .1.3.6.1.4.1.6527.3.1.2.6.81.1
Each row entry represents a next-hop for a next-hop group associated
with an endpoint path.

Entries cannot be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsEndptPathNhgNHType specifies the type of
next-hop.

When the value of vRtrMplsEndptPathNhgNHType is set to 'primary', this
next-hop will be the primary next-hop in the next-hop group.
Enumeration
Enumerated Values:
1primary
2backup
.1.3.6.1.4.1.6527.3.1.2.6.81.1.1
The value of vRtrMplsEndptPathNhgNHAddrType indicates the address type
of the next-hop.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.81.1.2
The value of vRtrMplsEndptPathNhgNHAddr indicates the address of the
next-hop.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.81.1.3
The value of vRtrMplsEndptPathNhgNHResolved indicates if next-hop is
resolved or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.81.1.4
The value of vRtrMplsEndptPathNhgNHOutIf indicates the index of the
outgoing interface that the next-hop resolved to if it is a direct
next-hop.

A value of 0 indicates that either the next-hop is not reso…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6527.3.1.2.6.81.1.5
The value of vRtrMplsEndptPathNhgNHDownCode indicates the reason for
the path NHG NH being not resolved.
TIMETRA-TC-MIBTmnxNhgDownReason
Type Values:
0notApplicable
1nextHopNotResolved
3nextHopIsLocal
4nextHopIsMcast
5resTypeMismatch
.1.3.6.1.4.1.6527.3.1.2.6.81.1.6
The value of vRtrMplsEndptPathNhgNHEgrOper indicates the operational
state of the egress stats in this next-hop group next hop.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.81.1.7
.1.3.6.1.4.1.6527.3.1.2.6.82 · 1 row entry · 10 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsFwdPlcyNhgNHPushLblTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsFwdPlcyNhgNHPushLblTable'
The vRtrMplsFwdPlcyNhgNHPushLblTable has an entry for each label to be
pushed onto the packet on the nexthop configured in the system. This
table augments the vRtrMplsFwdPlcyNhgNHTable.
vRtrMplsFwdPlcyNhgNHPushLblEntry row .1.3.6.1.4.1.6527.3.1.2.6.82.1
Each row entry represents a label to be pushed onto the packet on the
nexthop configured for a virtual router in the system.

Entries can be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
The value of vRtrMplsFwdPlcyNhgNHPushLabel1 indicates the 10th label
to be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.1
The value of vRtrMplsFwdPlcyNhgNHPushLabel2 indicates the 9th label to
be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.2
The value of vRtrMplsFwdPlcyNhgNHPushLabel3 indicates the 8th label to
be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.3
The value of vRtrMplsFwdPlcyNhgNHPushLabel4 indicates the 7th label to
be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.4
The value of vRtrMplsFwdPlcyNhgNHPushLabel5 indicates the 6th label to
be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.5
The value of vRtrMplsFwdPlcyNhgNHPushLabel6 indicates the 5th label to
be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.6
The value of vRtrMplsFwdPlcyNhgNHPushLabel7 indicates the 4th label to
be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.7
The value of vRtrMplsFwdPlcyNhgNHPushLabel8 indicates the 3rd label to
be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.8
The value of vRtrMplsFwdPlcyNhgNHPushLabel9 indicates the 2nd label to
be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.9
The value of vRtrMplsFwdPlcyNhgNHPushLabel10 indicates the 1st label
to be pushed onto the packet on this nexthop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.82.1.10
.1.3.6.1.4.1.6527.3.1.2.6.83 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsBindLblPathNhgNHPLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsBindLblPathNhgNHPLTable'
The vRtrMplsBindLblPathNhgNHPLTable has an entry for each push label
for a next-hop type associated with next-hop group with a binding
label path configured in the system.
vRtrMplsBindLblPathNhgNHPLEntry row .1.3.6.1.4.1.6527.3.1.2.6.83.1
Each row entry represents a push label for a next-hop type associated
with next-hop group with a binding label path, configured for a
virtual router in the system.
Column Syntax OID
The value of vRtrMplsBindLblPathNHgNHPLIndex specifies the index
associated with the push label.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.83.1.1
The value of vRtrMplsBindLblPathNHgNHPLabel specifies the label
number for push label.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.83.1.2
.1.3.6.1.4.1.6527.3.1.2.6.84 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsEndptPathNhgNHPLlbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsEndptPathNhgNHPLlbTable'
The vRtrMplsEndptPathNhgNHPLlbTable has an entry for each push label
for a next-hop type associated with next-hop group with an endpoint
address configured in the system.
vRtrMplsEndptPathNhgNHPLlbEntry row .1.3.6.1.4.1.6527.3.1.2.6.84.1
Each row entry represents a push label for a next-hop type associated
with next-hop group with an endpoint address, configured for a virtual
router in the system.
Column Syntax OID
The value of vRtrMplsEndptPathNhgNHPLblIndex specifies the index
associated with the push label.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.84.1.1
The value of vRtrMplsEndptPathNhgNHPLabel specifies the label number
for push label.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6527.3.1.2.6.84.1.2
.1.3.6.1.4.1.6527.3.1.2.6.86 · 1 row entry · 5 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsPceInitGenTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsPceInitGenTable'
The vRtrMplsPceInitGenTable has an entry for per router instance  for
PCE initiated LSPs on the system.
vRtrMplsPceInitGenEntry row .1.3.6.1.4.1.6527.3.1.2.6.86.1
Each entry represents paramters for PCE initiated LSPs on the system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The row status used for creation, deletion, or control of
vRtrMplsPceInitGenTable entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.86.1.1
The value of vRtrMplsPceInitGenSrte specifies if PCE initiated SR-TE
LSPs are supported on the system
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6527.3.1.2.6.86.1.2
The value of vRtrMplsPceInitGenSrteAdminState specifies the
administrative state of PCE initiated SR-TE LSPs on the system.

The value of vRtrMplsPceInitGenSrteAdminState is valid only if the
value of vRtr…
TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
.1.3.6.1.4.1.6527.3.1.2.6.86.1.3
The value of vRtrMplsPceInitGenSrteOperState indicates the
operational state of PCE initiated SR-TE LSPs on the system.

The value of vRtrMplsPceInitGenSrteOperState is valid only if the
value of vRtrMpls…
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.86.1.4
The value of vRtrMplsPceInitGenSrteOperDnRsn indicates the reason due
to which PCE Init SRTE LSP are operationally down.
Enumeration
Enumerated Values:
0notApplicable
1adminDown
2mplsOperDown
.1.3.6.1.4.1.6527.3.1.2.6.86.1.5
.1.3.6.1.4.1.6527.3.1.2.6.87 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsBindLblNHEgrStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsBindLblNHEgrStatsTable'
The vRtrMplsBindLblNHEgrStatsTable has an entry for egress statistics
for each next-hop in a next-hop group associated with a binding label
path.
vRtrMplsBindLblNHEgrStatsEntry row .1.3.6.1.4.1.6527.3.1.2.6.87.1
Each row entry represents a next-hop for a next-hop group associated
with a binding label path.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
The total of number of egress packets for this binding label path
next-hop group next-hop.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.87.1.1
The total of number of egress octets for this binding label path
next-hop group next-hop
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.87.1.2
.1.3.6.1.4.1.6527.3.1.2.6.88 · 1 row entry · 2 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsEndptNHEgrStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsEndptNHEgrStatsTable'
The vRtrMplsEndptNHEgrStatsTable has an entry for egress statistics
for each next-hop in a next-hop group associated with an endpoint
path.
vRtrMplsEndptNHEgrStatsEntry row .1.3.6.1.4.1.6527.3.1.2.6.88.1
Each row entry represents a next-hop for a next-hop group associated
with an endpoint path.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
The total of number of egress packets for this endpoint path next-hop
group next-hop.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.88.1.1
The total of number of egress octets for this endpoint path next-hop
group next-hop
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.88.1.2
.1.3.6.1.4.1.6527.3.1.2.6.89 · 1 row entry · 3 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsLspPathEgressStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsLspPathEgressStatsTable'
The vRtrMplsLspPathEgressStatsTable has an entry for egress statistics
associated with an LSP path.
vRtrMplsLspPathEgressStatsEntry row .1.3.6.1.4.1.6527.3.1.2.6.89.1
Each row entry represents a collection of egress statistics for an LSP
path.

Entries cannot be created and deleted via SNMP SET operations. Entries
in this table are created when egress statistics is enabl…
Column Syntax OID
The value of vRtrMplsLspPathEgrStatsOperState indicates the
operational state of egress statistics for the LSP path.
TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
.1.3.6.1.4.1.6527.3.1.2.6.89.1.1
The value of vRtrMplsLspEgressStatsAggrPkts indicates the total number
of egress packets for this LSP path
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.89.1.2
The value of vRtrMplsLspEgressStatsAggrOctets indicates the total
number of egress octets for this LSP path
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6527.3.1.2.6.89.1.3
.1.3.6.1.4.1.6527.3.1.2.6.91 · 1 row entry · 8 columns
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk vRtrMplsPathHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TIMETRA-MPLS-MIB::vRtrMplsPathHopTable'
The vRtrMplsPathHopTable has an entry to indicate the hops, strict or
loose, for an MPLS tunnel.
vRtrMplsPathHopEntry row .1.3.6.1.4.1.6527.3.1.2.6.91.1
Each row entry represents a hop, strict or loose, for an MPLS tunnel
configured for a virtual router in the system.

Entries can be created and deleted via SNMP SET operations.
Column Syntax OID
The value of vRtrMplsPathIndex indicates the primary index to
identify a particular explicit route object.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.91.1.1
The value of vRtrMplsPathHopIndex indicates the secondary index to
identify a particular hop.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6527.3.1.2.6.91.1.2
The row status used for creation, deletion, or control of
vRtrMplsPathHopTable entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6527.3.1.2.6.91.1.3
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.6527.3.1.2.6.91.1.4
The value of vRtrMplsPathHopAddrType specifies the type of
vRtrMplsPathHopAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6527.3.1.2.6.91.1.5
The value of vRtrMplsPathHopAddr specifies the hop address.
OctetStringr/w
Constraints:
range: 0-0
range: 4-4
range: 16-16
.1.3.6.1.4.1.6527.3.1.2.6.91.1.6
The value of vRtrMplsPathHopStrictOrLoose indicates whether this
tunnel hop is routed in a strict or loose fashion.
Enumerationr/w
Enumerated Values:
0notApplicable
1strict
2loose
.1.3.6.1.4.1.6527.3.1.2.6.91.1.7
The value of vRtrMplsPathHopSidLabel indicates the SID for this hop.
Unsigned32r/w
Constraints:
range: 32-1048575
range: 4294967295-4294967295
.1.3.6.1.4.1.6527.3.1.2.6.91.1.8